also print out irq no in /proc/interrups and /proc/stat in hex, so could
tell bus/dev/func.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
change names:
irq_desc() ==> irq_desc_alloc
__irq_desc() ==> irq_desc
Also split a few of the uses in lowlevel x86 code.
v2: need to check if desc is null in smp_irq_move_cleanup
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So we could remove some duplicated calling to irq_desc
v2: make sure irq_desc in init/main.c is not used without generic_hardirqs
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
remove irq limit checks - nr_irqs is dynamic and we expand anytime.
v2: fix checking about result irq_cfg_without_new, so could use msi again
v3: use irq_desc_without_new to check irq is valid
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There are a handful of loops that go from 0 to nr_irqs and use
get_irq_desc() on them. These would allocate all the irq_desc
entries, regardless of the need for them.
Use the smarter for_each_irq_desc() iterator that will only iterate
over the present ones.
v2: make sure arch without GENERIC_HARDIRQS work too
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
based on Eric's patch ...
together mold it with dyn_array for irq_desc, will allcate kstat_irqs for
nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already.
v2: make sure system without generic_hardirqs works they don't have irq_desc
v3: fix merging
v4: [mingo@elte.hu] fix typo
[ mingo@elte.hu ] irq: build fix
fix:
arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow':
arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs'
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
preallocate 32 irq_2_pin entries, and use get_one_free_irq_2_pin() to get
one more and link to irq_cfg if needed.
so don't waste one where no irq is enabled.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
preallocate size is 32, and if it is not enough, irq_cfg will more
via alloc_bootmem() or kzalloc(). (depending on how early we are in
system setup)
v2: fix typo about size of init_one_irq_cfg ... should use sizeof(struct irq_cfg)
v3: according to Eric, change get_irq_cfg() to irq_cfg()
v4: squash add irq_cfg_alloc in
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array.
Get rid of irq_desc[] array assumptions.
Preallocate 32 irq_desc, and irq_desc() will try to get more.
( No change in functionality is expected anywhere, except the odd build
failure where we missed a code site or where a crossing commit itroduces
new irq_desc[] usage. )
v2: according to Eric, change get_irq_desc() to irq_desc()
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Until now, NR_IRQS was derived from black magic defines that had to
be "large enough" to both accomodate NR_CPUS and MAX_NR_IO_APICs.
This resulted in a way too large irq_desc[] array on most x86 systems.
Especially with larger CPU masks, the size of irq_desc can spiral out
of control quickly.
So be smarter about it and use precise allocation instead: determine the
default maximum possible IRQ number from the ACPI MADT. Use a minimum limit
of at least 32 IRQs for broken BIOSes.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix non-APIC UP build:
arch/x86/kernel/built-in.o: In function `setup_arch':
: undefined reference to `pin_map_size'
arch/x86/kernel/built-in.o: In function `setup_arch':
: undefined reference to `first_free_entry'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
also add first_free_entry and pin_map_size, which were NR_IRQS derived
constants.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so could spare some memory with small alignment in bootmem
also tighten the alignment checking, and make print out less debug info.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Most if not all x86 platforms have an RTC device, but sometimes the RTC
is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI:
http://bugzilla.kernel.org/show_bug.cgi?id=11580https://bugzilla.redhat.com/show_bug.cgi?id=451188
It's best if we can discover the RTC via PNP because then we know
which flavor of device it is, where it lives, and which IRQ it uses.
But if we can't, we should register a platform device using the
compiled-in RTC_PORT/RTC_IRQ resource assumptions.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Reported-by: Rik Theys <rik.theys@esat.kuleuven.be>
Reported-by: shr_msn@yahoo.com.tw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.infradead.org/users/dwmw2/random-2.6:
Fix autoloading of MacBook Pro backlight driver.
Automatic MODULE_ALIAS() for DMI match tables.
Remove asm/a.out.h files for all architectures without a.out support.
Introduce HAVE_AOUT symbol to remove hard-coded arch list for BINFMT_AOUT
Remove redundant CONFIG_ARCH_SUPPORTS_AOUT
S390: Update comments about why we don't use <asm-generic/statfs.h>
SPARC: Use <asm-generic/statfs.h>
PowerPC: Use <asm-generic/statfs.h>
PARISC: Use <asm-generic/statfs.h>
x86_64: Use <asm-generic/statfs.h>
IA64: Use <asm-generic/statfs.h>
ARM: Use <asm-generic/statfs.h>
Make <asm-generic/statfs.h> suitable for 64-bit platforms.
Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driver
[MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉ
Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE.
EFS: Don't set f_fsid in statfs().
so we could remove the requirement that one needs to call
early_iounmap() in exactly reverse order of early_ioremap().
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After "dumpstack: x86: various small unification steps", the
assembler gives the following compile error. The error is in
dumpstack_64.c.
{standard input}: Assembler messages:
{standard input}:720: Error: Incorrect register `%rbx' used with `l' suffix
{standard input}:1340: Error: Incorrect register `%r12' used with `l' suffix
Indeed the suffix in get_bp() was wrong.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
remove remainder of additional_cpus logic. We now just listen to the
disabled_cpus value like we did for years. disabled_cpus is always >=
0 so no need for an extra check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
additional_cpus=<x> parameter is dangerous and broken: for example
if we boot additional_cpus=-2 on a stock dual-core system it will
crash the box on bootup.
So reduce the maze of code a bit by removingthe user-configurability
angle.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
num_possible_cpus() can be > 1 when disabled CPUs have been accounted.
Disabled CPUs are not in the cpu_present_map, so we can use
num_present_cpus() as a safe indicator to switch to UP alternatives.
Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- define STACKSLOTS_PER_LINE and use it
- define get_bp macro to hide the %%ebp/%%rbp difference
- i386: check task==NULL in dump_trace, like x86_64
- i386: show_trace(NULL, ...) uses current automatically
- x86_64: use [#%d] for die_counter, like i386
- whitespace and comments
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- make kstack= and early_param
- add oops=panic, setting panic_on_oops
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- x86: Write log_lvl strings if available
- start raw stack dumps on new line
- i386: Remove extra indentation for raw stack dumps
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- i386 and x86_64: always printk the 'data' parameter
- i386: announce stack switch (irq -> normal)
- i386: check if there is a stack switch before announcing it
There is a warning that 'context' might come out corrupt in early
boot. If this is true it should be fixed, not worked around.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Add "end" parameter to valid_stack_ptr and print_context_stack
- use sizeof(long) as the size of a word on the stack
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- x86_64: use %p to print an address
- make i386-version the same as the above
The result should be the same on x86_64; on i386 the
output only changes if CONFIG_KALLSYMS is turned off,
in which case the address is printed twice.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For some reason die_nmi is still defined in traps.c for
i386, but is found in dumpstack_64.c for x86_64. Move it
to dumpstack_32.c
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
traps_32.c and traps_64.c are now equal. Move one to traps.c,
delete the other one and change the Makefile
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use CONFIG_X86_64/CONFIG_X86_32 to condtionally compile the
parts needed for x86_64 or i386 only.
Runs a small userspace for a number of minimal configurations
and boots the defconfigs.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use task_pid_nr(tsk) instead of tsk->pid in do_general_protection.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is the last user of clear_mem_error, which is defined
only on i386. Expand the inline function and remove it from
include/asm-x86/mach-default/mach_traps.h
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use preempt_conditional_sti/cli in do_int3, like on x86_64.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- rename variable me -> tsk
- get thread and tsk like i386
- expand used_math()
- copy comment
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- set_system_gate on i386 is really set_system_trap_gate
- set_system_gate on x86_64 is really set_system_intr_gate
- ist=0 means no special stack switch is done:
- introduce STACKFAULT_STACK, DOUBLEFAULT_STACK, NMI_STACK,
DEBUG_STACK and MCE_STACK as on x86_64.
- use the _ist variants with XXX_STACK set to zero
- remove set_system_gate
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
traps: x86: correct copy/paste bug: a trap is a GATE_TRAP
Fix copy/paste/forgot-to-edit bug in desc.h.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make the x86_64-version and the i386-version of do_debug
more similar.
- introduce preempt_conditional_sti/cli to i386. The preempt-count
is now elevated during the trap handler, like on x86_64. It
does not run on a separate stack, however.
- replace an open-coded "send_sigtrap"
- copy some comments
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mark the exception handlers with "dotraplinkage" to hide the
calling convention differences between i386 and x86_64.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
