We've traditionally kept defconfig updates in a separate branch, often to
encourage submaintainers to handle those patches separately to avoid conflicts
on the shared files. The amount of changes seem to be decreasing though, so
we might rethink how we handle this going forward.
There really isn't much to write about here. The bulk of changes here
are enabling drivers for whatever platforms the hardware is found on
(and multi-configs).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HXd+
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM: SoC defconfig updates from Olof Johansson:
"We've traditionally kept defconfig updates in a separate branch, often
to encourage submaintainers to handle those patches separately to
avoid conflicts on the shared files. The amount of changes seem to be
decreasing though, so we might rethink how we handle this going
forward.
There really isn't much to write about here. The bulk of changes here
are enabling drivers for whatever platforms the hardware is found on
(and multi-configs)"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
multi_v7_defconfig: make Rockchip usb2-phy built-in
ARM: omap2plus_defconfig: Enable droid 4 devices
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
ARM: configs: aspeed: Add new drivers
ARM: configs: aspeed: Update configs for BMC systems
ARM: omap2plus_defconfig: Enable TI Ethernet PHY
ARM: configs: Add new config fragment to change RAM start point
ARM: configs: stm32: Add I2C support
multi_v7_defconfig: make Rockchip DRM drivers built-in
ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value
ARM: imx_v6_v7_defconfig: Select SMSC_PHY
ARM: davinci_all_defconfig: convert to use libata PATA
ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
ARM: omap2plus_defconfig: enable ahci-dm816 module
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
ARM: bcm2835: Enable missing CMA settings for VC4 driver
ARM: socfpga: updates for socfpga_defconfig
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
Add newly unstreamed drivers to the defconfigs for the Aspeed SoCs.
The defconfigs are reworked to be useful for development and testing
of OpenBMC on these systems.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJY7ZF6AAoJEGt2WQeBR3CecWoQALP2+KoIBHKtvmV8yfKQlsEi
zpOeaLyGD5jkc099KscfoSAF0qG+m+nHvoYc75MsW9n19CePmHZmqwnHDi680+dq
NXaKHChTumhuJFvzGt9soRMQBqZU5xBhr550xkQ5t3r82AuofJ+4BzsCRdidN7Tn
y6ocW7jMVlG0AG82qZtlbljeB95xkPOHhnu562AFAp0D85Anin+aVYQYlBxLrH4m
lTE3sadX9kmTbDO6KjYlko5wfl6crzyeny94oxhqT2zDImI/4RLM7poJce0SPqKa
tv2WknR7v1xtOXPTjJ9d7sb6mXoDy0zir9TjomVGTfSORt+ccBi2Tvybe/vJkHU0
/Qp4mXAUQ2exI9Qm8w5F8PZz1utNpbttYhc1fHmqV8aN1BDgZgm00IgOn3DRnFzJ
pxueCbV042zC0jAADW3+Eu+4Am/XyKmcwcjSAwqhAN4Yu2YDLKCMQGyT7WP3So/B
W9T9UQvPcd2lRCfzkB4IF2DFDmla7quejZZr5A/ZW0uL+mW9Y/Ey8V6A+QaYlrm6
VvWZrjSJvjc4/Rg1BrHnc4Nd5FhVlPsOg/wj9CR/ch2HLvEzTeFX2FwyFr3D2lWa
TrnmeLcMorNU6ZDMvWlReY91qU4gETIxWDbDqykcgdx+eowS9HBPpS6mYmovfpVf
gto8cYumc7pTXbHTXZTW
=/Q63
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
Aspeed defconfig updates for 4.12
Add newly unstreamed drivers to the defconfigs for the Aspeed SoCs.
The defconfigs are reworked to be useful for development and testing
of OpenBMC on these systems.
* tag 'aspeed-4.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: aspeed: Add new drivers
ARM: configs: aspeed: Update configs for BMC systems
ARM: aspeed: Add CONFIG_SPI_ASPEED_SMC
Signed-off-by: Olof Johansson <olof@lixom.net>
to update to use new ti-cpufreq driver, the rest is just
to enable drivers found on various devices:
- Update to use ti-cpufreq driver that we now have
- Enable SATA for ti81xx as a loadable module
- Enable Ethernet PHY for DP83848
- Enable modem related modules for PPP, QMI and USB ACM
as loadable modules
- Enable droid 4 related drivers as lodable modules except
for PMIC and regulator so eMMC can be used for root
-----BEGIN PGP SIGNATURE-----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=4IRe
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Defconfig updates for omaps for v4.12 merge window. Mostly
to update to use new ti-cpufreq driver, the rest is just
to enable drivers found on various devices:
- Update to use ti-cpufreq driver that we now have
- Enable SATA for ti81xx as a loadable module
- Enable Ethernet PHY for DP83848
- Enable modem related modules for PPP, QMI and USB ACM
as loadable modules
- Enable droid 4 related drivers as lodable modules except
for PMIC and regulator so eMMC can be used for root
* tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable droid 4 devices
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
ARM: omap2plus_defconfig: Enable TI Ethernet PHY
ARM: omap2plus_defconfig: enable ahci-dm816 module
ARM: omap2plus_defconfig: Enable support for ti-cpufreq
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable MAX11801 and HID_MULTITOUCH touch drivers.
- Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet
phy supported by it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEbBAABAgAGBQJY65FXAAoJEFBXWFqHsHzOyfYH9A3tKXcNwIUJhzfpLI9FTi4h
1w3j1dJO0hzj8Apd+7o7bJWXLDsNGAs0We8sYeZWjeyOol2wMt6Lc4LrSrn9lQhp
LlLzEKeqiX4UI+Az6YCv5AG8XefCUtb3w5zK2nQkC8w3Ge4fs1l7X9mJCMpRYtPQ
D3rqcksRKoAAVXmaO3d1MHNi2lycVUVdxHW/z7S68oeL6gqEAXC07op9in4TJCaY
zwIvXxuLta1GQszwPGUFRXIb70OhLbJ48433gUZDLLuItlgFAmIEAn9nzFXN3q3p
dpuEeYKSD0IeJZqIkLzaBZ3OCm4/gNrbsduSzmihZSm9W03mJAOoqgnqQBbfTA==
=5aru
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig updates for 4.12:
- Enable MAX11801 and HID_MULTITOUCH touch drivers.
- Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet
phy supported by it.
* tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select SMSC_PHY
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Enable DYNAMIC_DEBUG because it is useful for debugging.
2. Increase CMA memory region to allow handling H.264 1080p videos.
-----BEGIN PGP SIGNATURE-----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=ScYV
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig ARM update for v4.12:
1. Enable DYNAMIC_DEBUG because it is useful for debugging.
2. Increase CMA memory region to allow handling H.264 1080p videos.
* tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
ARM: exynos_defconfig: Enable DYNAMIC_DEBUG and get rid of old ext3
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable QCOM remoteproc and related drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ma84
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Qualcomm ARM Based defconfig Updates for v4.12
* Enable QCOM remoteproc and related drivers
* tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
Some patches to enable new modules in the defconfig.
-----BEGIN PGP SIGNATURE-----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=a4lF
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Allwinner defconfig changes for 4.12
Some patches to enable new modules in the defconfig.
* tag 'sunxi-defconfig-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in
ARM: multi_v7_defconfig: Enable AC100 RTC driver
ARM: multi_v7_defconfig: Switch sunxi RSB driver from module to built-in
ARM: sunxi_defconfig: Enable AC100 RTC driver
Signed-off-by: Olof Johansson <olof@lixom.net>
PATA driver for DaVinci.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hjLw
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.12/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Shift to the newly introduced PalmChip
PATA driver for DaVinci.
* tag 'davinci-for-v4.12/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: convert to use libata PATA
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
----------
- Enable I2C
- Add config fragment for RAM start point
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DGsD
-----END PGP SIGNATURE-----
Merge tag 'stm32-defconfig-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig
STM32 defconfig updates for v4.12, round 1.
Highlights:
----------
- Enable I2C
- Add config fragment for RAM start point
* tag 'stm32-defconfig-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: configs: Add new config fragment to change RAM start point
ARM: configs: stm32: Add I2C support
Signed-off-by: Olof Johansson <olof@lixom.net>
The phy is necessary for the dwc2 controllers driving the usb ports
on all arm32 Rockchip socs. Both the dwc2 as well as usb downstream
drivers (mass-storage as well as usb networking) are already built-in,
so only the phy is missing to allow booting from usb-devices without
to much hassle.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to
be able to mount root on the eMMC. And then POWER_RESET_GPIO
is good to have built-in. The rest of the devices can be loadable
modules.
This gets various devices such as regulators, touchscreen, power
button, HDMI audio, LEDs, RTC, and ADC working.
Note that omapdrm needs to be configured manually as we're still
using omapfb by default.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.
While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org
- LPC Host Controller
- Pulse Width Modulation and Tachometer
- Analog to Digital converter
These three new drivers for the Aspeed SoCs will appear in 4.12. This
defconfig is based on next-20170406.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Developers can develop and users can test with this config against an
OpenBMC userspace. It turns off debugging features to ensure network
performance is high.
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add STM32 crypto support in stm32_defconfig file.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DP83848_PHY i.e. [TI TLK10X 10/100 Mbps PHY] is used on the
am335x-icev2 board. Enable the PHY driver for it.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These cause warnings in linux-next, as the symbols have become 'bool' there:
arch/arm/configs/multi_v7_defconfig:600:warning: symbol value 'm' invalid for ROCKCHIP_INNO_HDMI
arch/arm/configs/multi_v7_defconfig:599:warning: symbol value 'm' invalid for ROCKCHIP_DW_MIPI_DSI
arch/arm/configs/multi_v7_defconfig:598:warning: symbol value 'm' invalid for ROCKCHIP_DW_HDMI
arch/arm/configs/multi_v7_defconfig:597:warning: symbol value 'm' invalid for ROCKCHIP_ANALOGIX_DP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following:
- Gerd enables the BCM2835 MMC driver which yields better performance than the
default one (iProc)
-----BEGIN PGP SIGNATURE-----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=lxDs
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Pull "Broadcom defconfig changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.12,
please pull the following:
- Gerd enables the BCM2835 MMC driver which yields better performance than the
default one (iProc)
* tag 'arm-soc/for-4.12/defconfig' of http://github.com/Broadcom/stblinux:
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
ARM: bcm2835: Enable missing CMA settings for VC4 driver
Video capture and display on DA850 and
an ADC driver thats used by Lego EV3.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wj14
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.12/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Pull "DaVinci defconfig updates for v4.12" from Sekhar Nori:
DaVinci defconfig updates for enabling
Video capture and display on DA850 and
an ADC driver thats used by Lego EV3.
* tag 'davinci-for-v4.12/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable TI ADS7950
ARM: davinci_all_defconfig: enable IRQ support for pca953x
ARM: davinci_all_defconfig: enable VPIF display modules
stm32_defconfig is used for several STM32 MCU: STM32F429, STM32F469,
STM32F746 and now STM32H743. Each of MCU listed have different interrupts
number mapped on NVIC. STM32F429: 81, STM32F469: 92, STM32F746: 97 and
STM32H743: 149. I could set CPU_V7M_NUM_IRQ to 149 but in order to avoid
forgetting to update this value for next STM32 MCU I prefer to set it to
max value: 240.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The imx6sl-evk board has a LAN8720A ethernet phy supported by SMSC_PHY.
Add this driver to the default imx config since the device is present on
one of the evaluation boards.
This used to work mostly fine with the generic phy driver until
commit 0878fff1f4 ("net: phy: Do not perform software reset for
Generic PHY"). The fact that soft reset is no longer performed
apparently causes RX to sometimes failes which can cause netboot to
timeout on DHCP. This is eventually retried and it works after link
up/down but can takes 90 seconds to reach the login prompt.
This was generated with "make savedefconfig" and it includes a few
additional minor cleanups.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts davinci_all_defconfig to use libata PATA
drivers.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + added patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
An adsp-pil node is present in at least the MSM8974 SoC. Simply enable
all Qualcomm remoteproc drivers to avoid more work in the future.
The SMP2P driver is required for adsp-pil to initialize correctly.
Enable the SMSM driver at Bjorn Andersson's request: "We also need
CONFIG_QCOM_SMSM=y here, its currently used to signal state of the ring
buffers for WiFi."
CONFIG_QCOM_WCNSS_CTRL is required to load firmware/configuration data
into the WCNSS core, which handles WiFi and Bluetooth.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This is now supported on the dm8168-evm board, so enable it in
the defconfig for omap2+.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Currently bcm2835_defconfig has CMA disabled which makes the
HDMI output on a Raspberry Pi 1 stop working during boot:
fb: switching to vc4drmfb from simple
Console: switching to colour dummy device 80x30
[drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vc4-drm soc:gpu: failed to allocate buffer with size 9216000
vc4-drm soc:gpu: Failed to set initial hw configuration.
So enable CMA and DMA_CMA in bcm2835_defconfig.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 4400d9ac05 ("ARM: bcm2835: Enable the VC4 graphics driver in the defconfig")
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch enables Altera TSE support in socfpga_defconfig
Signed-off-by: Jia Jie Ho <ho.jia.jie@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Select CONFIG_HID_MULTITOUCH so that we can have multi touchscreen
funtionality via USB by default on Engicam i.CoreM6 Quad with
OpenFrame Cap 10.1 display boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Select CONFIG_TOUCHSCREEN_MAX11801 so that we can have touchscreen
funtionality by default on Engicam i.CoreM6 Quad boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Current CMA size of 64 Mbytes is right on the edge of being small when
several drivers need to allocate large CMA buffers.
For example, if the s5p-mfc driver needs to pre-allocate CMA memory to
decode a H.264 1080p video, then there won't be enough CMA memory left
for other drivers, such as the exynos-drm driver that may need to
allocate GEM buffers for the display manager.
Increasing CMA size to 96 Mbytes in exynos_defconfig addresses use-cases
such as these.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
DYNAMIC_DEBUG is quite useful for debugging kernels and should not cause
noticeable performance regressions. It makes the kernel bigger (around 4%)
but this difference should not impact typical developer and reference
usage of this defconfig.
Sizes:
zImage-old: 4641496 bytes
zImage-new: 4811384 bytes
text data bss dec hex filename
7031229 2570916 327016 9929161 9781c9 vmlinux-old
7205921 2800052 327016 10332989 9dab3d vmlinux-new
Additionally, remove the EXT3_FS symbol because it is entirely replaced
by EXT4_FS.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
This enables the TI ADS7950 IIO driver. This is used on LEGO MINDSTORMS
EV3. The other IIO configs removed in this patch are selected by
CONFIG_TI_ADS7950, so they are not actually being desabled.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
AM335x, AM437x, DRA7xx, and AM57xx platforms all now depend on
ti-cpufreq driver to enable proper OPPs for use with cpufreq, so
enable the same.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We need IRQs from the tca6416 expander for vpif capture to work on the
da850-evm board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the VPIF display module and the video encoder present on the
da850-evm UI board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The AXP20X regulator support is currently built as a module, which means
it's not available until the root fs has been mounted, but the boot loader
might not have enabled the required regulators, so build their drivers
into the kernel.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The sunxi RSB bus is used for peripherals like voltage regulators and
real-time clocks which should be available early in the boot process.
As a module, the driver will not be available until the root fs has been
mounted, so build the driver into the kernel.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The moxart defconfig wasn't even building a kernel for Moxart,
it was building a kernel for V4T on the nothing platform. Switch
to MULTI_V4 and keep the right drivers, update a few selections.
Now it (presumably) builds a minimalist Moxart kernel again.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver
has been merged into mainline.
There is now a new defconfig file for tango4.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=noKQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver has
been merged into mainline.
There is now a new defconfig file for tango4"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: multi_v7_defconfig: enable pstore configs
ARM: multi_v7_defconfig: enable some newly added crypto modules
ARM: davinci_all_defconfig: enable SATA modules
arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT
arm64: defconfig: enable CONFIG_MTD_BLOCK
ARM: Import tango4_defconfig
ARM: omap2plus_defconfig: Enable support for RTC M41T80
ARM: omap2plus_defconfig: Enable support for micrell phys
ARM: vf610m4: defconfig: enable EXT4 filesystem
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
arm64: defconfig: Enable NUMA and NUMA_BALANCING
arm64: defconfig: enable SMMUv3 config
ARM: davinci_all_defconfig: enable iio
ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
ARM: configs: stm32: Add RTC support in STM32 defconfig
ARM: defconfig: qcom: add APQ8060 DragonBoard devices
ARM: qcom_defconfig: enable thermal sensors
ARM: qcom_defconfig: add ahci configs
ARM: qcom_defconfig: add pcie and atl1c ethernet configs
ARM: qcom_defconfig: add usb related configs
...
