It's used to abstract the code from kvm_handle_hva_range and it will be
used by later patch
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's used to walk all the sptes on the rmap to clean up the
code
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM may turn a user page to a kernel page when kernel writes a readonly
user page if CR0.WP = 1. This shadow page entry will be reused after
SMAP is enabled so that kernel is allowed to access this user page
Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu
once CR4.SMAP is updated
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages
should not be reused for different values of it. Thus, it has to be
added to the mask in kvm_mmu_pte_write.
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Soft mmu uses direct shadow page to fill guest large mapping with small
pages if huge mapping is disallowed on host. So zapping direct shadow
page works well both for soft mmu and hard mmu, it's just less widely
applicable.
Fix the comment to reflect this.
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Message-Id: <552C91BA.1010703@linux.intel.com>
[Fix comment wording further. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As Andres pointed out:
| I don't understand the value of this check here. Are we looking for a
| broken memslot? Shouldn't this be a BUG_ON? Is this the place to care
| about these things? npages is capped to KVM_MEM_MAX_NR_PAGES, i.e.
| 2^31. A 64 bit overflow would be caused by a gigantic gfn_start which
| would be trouble in many other ways.
This patch drops the memslot overflow check to make the codes more simple.
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Message-Id: <1429064694-3072-1-git-send-email-wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dirty logging tracks sptes in 4k granularity, meaning that large sptes
have to be split. If live migration is successful, the guest in the
source machine will be destroyed and large sptes will be created in the
destination. However, the guest continues to run in the source machine
(for example if live migration fails), small sptes will remain around
and cause bad performance.
This patch introduce lazy collapsing of small sptes into large sptes.
The rmap will be scanned in ioctl context when dirty logging is stopped,
dropping those sptes which can be collapsed into a single large-page spte.
Later page faults will create the large-page sptes.
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Message-Id: <1428046825-6905-1-git-send-email-wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds new kvm_x86_ops dirty logging hooks to enable/disable dirty
logging for particular memory slot, and to flush potentially logged dirty GPAs
before reporting slot->dirty_bitmap to userspace.
kvm x86 common code calls these hooks when they are available so PML logic can
be hidden to VMX specific. SVM won't be impacted as these hooks remain NULL
there.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch changes the second parameter of kvm_mmu_slot_remove_write_access from
'slot id' to 'struct kvm_memory_slot *' to align with kvm_x86_ops dirty logging
hooks, which will be introduced in further patch.
Better way is to change second parameter of kvm_arch_commit_memory_region from
'struct kvm_userspace_memory_region *' to 'struct kvm_memory_slot * new', but it
requires changes on other non-x86 ARCH too, so avoid it now.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch avoids unnecessary dirty GPA logging to PML buffer in EPT violation
path by setting D-bit manually prior to the occurrence of the write from guest.
We only set D-bit manually in set_spte, and leave fast_page_fault path
unchanged, as fast_page_fault is very unlikely to happen in case of PML.
For the hva <-> pa change case, the spte is updated to either read-only (host
pte is read-only) or be dropped (host pte is writeable), and both cases will be
handled by above changes, therefore no change is necessary.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds new mmu layer functions to clear/set D-bit for memory slot, and
to write protect superpages for memory slot.
In case of PML, CPU logs the dirty GPA automatically to PML buffer when CPU
updates D-bit from 0 to 1, therefore we don't have to write protect 4K pages,
instead, we only need to clear D-bit in order to log that GPA.
For superpages, we still write protect it and let page fault code to handle
dirty page logging, as we still need to split superpage to 4K pages in PML.
As PML is always enabled during guest's lifetime, to eliminate unnecessary PML
GPA logging, we set D-bit manually for the slot with dirty logging disabled.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't have to write protect guest memory for dirty logging if architecture
supports hardware dirty logging, such as PML on VMX, so rename it to be more
generic.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No TLB flush is needed when there's no valid rmap in memory slot.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We now have a generic function that does most of the work of
kvm_vm_ioctl_get_dirty_log, now use it.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
When software changes D bit (either from 1 to 0, or 0 to 1), the
corresponding TLB entity in the hardware won't be updated immediately. We
should flush it to guarantee the consistence of D bit between TLB and
MMU page table in memory. This is especially important when clearing
the D bit, since it may cause false negatives in reporting dirtiness.
Sanity test was done on my machine with Intel processor.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
[Check A bit too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because ASSERT is just a printk, these would oops right away.
The assertion thus hardly adds anything.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The initialization function in mmu.c can always use walk_mmu, which
is known to be vcpu->arch.mmu. Only init_kvm_nested_mmu is used to
initialize vcpu->arch.nested_mmu.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since most virtual machines raise this message once, it is a bit annoying.
Make it KERN_DEBUG severity.
Cc: stable@vger.kernel.org
Fixes: 7a2e8aaf0f
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
problems, clarifies VCPU init, and fixes a regression concerning the
VGIC init flow.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUjsVhAAoJEEtpOizt6ddy5rIH/1V/YVwhprC55YqdHelU9Qu2
Muzsx+7F71NxC7xgMGFqPD1YrPR+hxvoPhy+ADOBlvcqlolrkDnV9I+8e3geaYNc
nZ/yEnoGTtbAggiS1smx7usBv34Z88Sd5txNjmj1cmHBy+VOWlyidWMkGBTsfBRe
mVc61BDUfyC47udgRHXhwS80sbHLJHElmADisFOVmQNBYwwiHiTdx0hMBMnHcC3Y
/3T0tKxHdeTISnmA+J+n7TcChtTIM4xqC6kwf3rw3b7XX8gdtTKylDHX2GLAg646
RdebAG2twmGpIc6SxXZbo38f3oY9OFo1Le5xZGa6iUjD56VDw/e4wg4iA2juo0Y=
=J2Ut
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-3.19-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
Second round of changes for KVM for arm/arm64 for v3.19; fixes reboot
problems, clarifies VCPU init, and fixes a regression concerning the
VGIC init flow.
Conflicts:
arch/ia64/kvm/kvm-ia64.c [deleted in HEAD and modified in kvmarm]
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.
The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.
However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
MMIO_MAX_GEN is the same as MMIO_GEN_MASK. Use only one.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull percpu updates from Tejun Heo:
"A lot of activities on percpu front. Notable changes are...
- percpu allocator now can take @gfp. If @gfp doesn't contain
GFP_KERNEL, it tries to allocate from what's already available to
the allocator and a work item tries to keep the reserve around
certain level so that these atomic allocations usually succeed.
This will replace the ad-hoc percpu memory pool used by
blk-throttle and also be used by the planned blkcg support for
writeback IOs.
Please note that I noticed a bug in how @gfp is interpreted while
preparing this pull request and applied the fix 6ae833c7fe
("percpu: fix how @gfp is interpreted by the percpu allocator")
just now.
- percpu_ref now uses longs for percpu and global counters instead of
ints. It leads to more sparse packing of the percpu counters on
64bit machines but the overhead should be negligible and this
allows using percpu_ref for refcnting pages and in-memory objects
directly.
- The switching between percpu and single counter modes of a
percpu_ref is made independent of putting the base ref and a
percpu_ref can now optionally be initialized in single or killed
mode. This allows avoiding percpu shutdown latency for cases where
the refcounted objects may be synchronously created and destroyed
in rapid succession with only a fraction of them reaching fully
operational status (SCSI probing does this when combined with
blk-mq support). It's also planned to be used to implement forced
single mode to detect underflow more timely for debugging.
There's a separate branch percpu/for-3.18-consistent-ops which cleans
up the duplicate percpu accessors. That branch causes a number of
conflicts with s390 and other trees. I'll send a separate pull
request w/ resolutions once other branches are merged"
* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
percpu: fix how @gfp is interpreted by the percpu allocator
blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
percpu_ref: add PERCPU_REF_INIT_* flags
percpu_ref: decouple switching to percpu mode and reinit
percpu_ref: decouple switching to atomic mode and killing
percpu_ref: add PCPU_REF_DEAD
percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
percpu_ref: replace pcpu_ prefix with percpu_
percpu_ref: minor code and comment updates
percpu_ref: relocate percpu_ref_reinit()
Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
Revert "percpu: free percpu allocation info for uniprocessor system"
percpu-refcount: make percpu_ref based on longs instead of ints
percpu-refcount: improve WARN messages
percpu: fix locking regression in the failure path of pcpu_alloc()
percpu-refcount: add @gfp to percpu_ref_init()
proportions: add @gfp to init functions
percpu_counter: add @gfp to percpu_counter_init()
percpu_counter: make percpu_counters_lock irq-safe
...
1. We were calling clear_flush_young_notify in unmap_one, but we are
within an mmu notifier invalidate range scope. The spte exists no more
(due to range_start) and the accessed bit info has already been
propagated (due to kvm_pfn_set_accessed). Simply call
clear_flush_young.
2. We clear_flush_young on a primary MMU PMD, but this may be mapped
as a collection of PTEs by the secondary MMU (e.g. during log-dirty).
This required expanding the interface of the clear_flush_young mmu
notifier, so a lot of code has been trivially touched.
3. In the absence of shadow_accessed_mask (e.g. EPT A bit), we emulate
the access bit by blowing the spte. This requires proper synchronizing
with MMU notifier consumers, like every other removal of spte's does.
Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Callbacks don't have to do extra computation to learn what the caller
(lvm_handle_hva_range()) knows very well. Useful for
debugging/tracing/printk/future.
Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A one-line wrapper around kvm_make_request is not particularly
useful. Replace kvm_mmu_flush_tlb() with kvm_make_request().
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- we count KVM_REQ_TLB_FLUSH requests, not actual flushes
(KVM can have multiple requests for one flush)
- flushes from kvm_flush_remote_tlbs aren't counted
- it's easy to make a direct request by mistake
Solve these by postponing the counting to kvm_check_request().
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Percpu allocator now supports allocation mask. Add @gfp to
percpu_counter_init() so that !GFP_KERNEL allocation masks can be used
with percpu_counters too.
We could have left percpu_counter_init() alone and added
percpu_counter_init_gfp(); however, the number of users isn't that
high and introducing _gfp variants to all percpu data structures would
be quite ugly, so let's just do the conversion. This is the one with
the most users. Other percpu data structures are a lot easier to
convert.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Currently, if a permission error happens during the translation of
the final GPA to HPA, walk_addr_generic returns 0 but does not fill
in walker->fault. To avoid this, add an x86_exception* argument
to the translate_gpa function, and let it fill in walker->fault.
The nested_page_fault field will be true, since the walk_mmu is the
nested_mmu and translate_gpu instead operates on the "outer" (NPT)
instance.
Reported-by: Valentine Sinitsyn <valentine.sinitsyn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bit 8 would be the "global" bit, which does not quite make sense for non-leaf
page table entries. Intel ignores it; AMD ignores it in PDEs, but reserves it
in PDPEs and PML4Es. The SVM test is relying on this behavior, so enforce it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following events can lead to an incorrect KVM_EXIT_MMIO bubbling
up to userspace:
(1) Guest accesses gpa X without a memory slot. The gfn is cached in
struct kvm_vcpu_arch (mmio_gfn). On Intel EPT-enabled hosts, KVM sets
the SPTE write-execute-noread so that future accesses cause
EPT_MISCONFIGs.
(2) Host userspace creates a memory slot via KVM_SET_USER_MEMORY_REGION
covering the page just accessed.
(3) Guest attempts to read or write to gpa X again. On Intel, this
generates an EPT_MISCONFIG. The memory slot generation number that
was incremented in (2) would normally take care of this but we fast
path mmio faults through quickly_check_mmio_pf(), which only checks
the per-vcpu mmio cache. Since we hit the cache, KVM passes a
KVM_EXIT_MMIO up to userspace.
This patch fixes the issue by using the memslot generation number
to validate the mmio cache.
Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
[xiaoguangrong: adjust the code to make it simpler for stable-tree fix.]
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vcpu exits and memslot mutations can run concurrently as long as the
vcpu does not aquire the slots mutex. Thus it is theoretically possible
for memslots to change underneath a vcpu that is handling an exit.
If we increment the memslot generation number again after
synchronize_srcu_expedited(), vcpus can safely cache memslot generation
without maintaining a single rcu_dereference through an entire vm exit.
And much of the x86/kvm code does not maintain a single rcu_dereference
of the current memslots during each exit.
We can prevent the following case:
vcpu (CPU 0) | thread (CPU 1)
--------------------------------------------+--------------------------
1 vm exit |
2 srcu_read_unlock(&kvm->srcu) |
3 decide to cache something based on |
old memslots |
4 | change memslots
| (increments generation)
5 | synchronize_srcu(&kvm->srcu);
6 retrieve generation # from new memslots |
7 tag cache with new memslot generation |
8 srcu_read_unlock(&kvm->srcu) |
... |
<action based on cache occurs even |
though the caching decision was based |
on the old memslots> |
... |
<action *continues* to occur until next |
memslot generation change, which may |
be never> |
|
By incrementing the generation after synchronizing with kvm->srcu readers,
we ensure that the generation retrieved in (6) will become invalid soon
after (8).
Keeping the existing increment is not strictly necessary, but we
do keep it and just move it for consistency from update_memslots to
install_new_memslots. It invalidates old cached MMIOs immediately,
instead of having to wait for the end of synchronize_srcu_expedited,
which makes the code more clearly correct in case CPU 1 is preempted
right after synchronize_srcu() returns.
To avoid halving the generation space in SPTEs, always presume that the
low bit of the generation is zero when reconstructing a generation number
out of an SPTE. This effectively disables MMIO caching in SPTEs during
the call to synchronize_srcu_expedited. Using the low bit this way is
somewhat like a seqcount---where the protected thing is a cache, and
instead of retrying we can simply punt if we observe the low bit to be 1.
Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next patch will give a meaning (a la seqcount) to the low bit of the
generation number. Ensure that it matches between kvm->memslots->generation
and kvm_current_mmio_generation().
Cc: stable@vger.kernel.org
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In long-mode, bit 7 in the PDPTE is not reserved only if 1GB pages are
supported by the CPU. Currently the bit is considered by KVM as always
reserved.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we can flush all the TLBs out of the mmu lock without TLB corruption when
write-proect the sptes, it is because:
- we have marked large sptes readonly instead of dropping them that means we
just change the spte from writable to readonly so that we only need to care
the case of changing spte from present to present (changing the spte from
present to nonpresent will flush all the TLBs immediately), in other words,
the only case we need to care is mmu_spte_update()
- in mmu_spte_update(), we haved checked
SPTE_HOST_WRITEABLE | PTE_MMU_WRITEABLE instead of PT_WRITABLE_MASK, that
means it does not depend on PT_WRITABLE_MASK anymore
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Relax the tlb flush condition since we will write-protect the spte out of mmu
lock. Note lockless write-protection only marks the writable spte to readonly
and the spte can be writable only if both SPTE_HOST_WRITEABLE and
SPTE_MMU_WRITEABLE are set (that are tested by spte_is_locklessly_modifiable)
This patch is used to avoid this kind of race:
VCPU 0 VCPU 1
lockless wirte protection:
set spte.w = 0
lock mmu-lock
write protection the spte to sync shadow page,
see spte.w = 0, then without flush tlb
unlock mmu-lock
!!! At this point, the shadow page can still be
writable due to the corrupt tlb entry
Flush all TLB
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently, kvm zaps the large spte if write-protected is needed, the later
read can fault on that spte. Actually, we can make the large spte readonly
instead of making them un-present, the page fault caused by read access can
be avoided
The idea is from Avi:
| As I mentioned before, write-protecting a large spte is a good idea,
| since it moves some work from protect-time to fault-time, so it reduces
| jitter. This removes the need for the return value.
This version has fixed the issue reported in 6b73a9606, the reason of that
issue is that fast_page_fault() directly sets the readonly large spte to
writable but only dirty the first page into the dirty-bitmap that means
other pages are missed. Fixed it by only the normal sptes (on the
PT_PAGE_TABLE_LEVEL level) can be fast fixed
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Using sp->role.level instead of @level since @level is not got from the
page table hierarchy
There is no issue in current code since the fast page fault currently only
fixes the fault caused by dirty-log that is always on the last level
(level = 1)
This patch makes the code more readable and avoids potential issue in the
further development
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM does not handle the reserved bits of x86 page tables correctly:
In PAE, bits 5:8 are reserved in the PDPTE.
In IA-32e, bit 8 is not reserved.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Rename variable smep to cr4_smep, which can better reflect the
meaning of the variable.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds SMAP handling logic when setting CR4 for guests
Thanks a lot to Paolo Bonzini for his suggestion to use the branchless
way to detect SMAP violation.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Read-only large sptes can be created due to read-only faults as
follows:
- QEMU pagetable entry that maps guest memory is read-only
due to COW.
- Guest read faults such memory, COW is not broken, because
it is a read-only fault.
- Enable dirty logging, large spte not nuked because it is read-only.
- Write-fault on such memory causes guest to loop endlessly
(which must go down to level 1 because dirty logging is enabled).
Fix by dropping large spte when necessary.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By setting a Kconfig option, the architecture can control when
guest notifications will be presented by the apf backend.
There is the default batch mechanism, working as before, where the vcpu
thread should pull in this information.
Opposite to this, there is now the direct mechanism, that will push the
information to the guest.
This way s390 can use an already existing architecture interface.
Still the vcpu thread should call check_completion to cleanup leftovers.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
