Now that we've moved the Gen9 GuC blobs to version 32 we have CTB
support on all gens, so no need to restrict the usage to Gen11+.
Note that MMIO communication is still required for CTB initialization.
v2: fix commit message nits (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-1-daniele.ceraolospurio@intel.com
Use i915_gem_object_lock() to guard the LUT and active reference to
allow us to break free of struct_mutex for handling GEM_CLOSE.
Testcase: igt/gem_close_race
Testcase: igt/gem_exec_parallel
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606112320.9704-1-chris@chris-wilson.co.uk
This allows us to avoid iterating the child devices in some cases.
Also replace the presence bit with child device being non-NULL, and set
the child device pointer last to allow us to take advantage of it in
follow-up work.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ceccb75d637af3134d0328d67cbd6623932f94db.1559308269.git.jani.nikula@intel.com
In this patch, a vfunc read_luts() is introduced to create a hw lut
i.e. lut having values read from gamma/degamma registers which will
later be used to compare with sw lut to validate gamma/degamma lut values.
v3: -Rebase
v4: -Renamed intel_get_color_config to intel_color_get_config [Jani]
-Wrapped get_color_config() [Jani]
v5: -Renamed intel_color_get_config() to intel_color_read_luts()
-Renamed get_color_config to read_luts
v6: -Renamed intel_color_read_luts() back to intel_color_get_config()
[Jani and Ville]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1559123462-7343-2-git-send-email-swati2.sharma@intel.com
Move over structures, enums and macros from intel_display.h and
i915_drv.h to have all the display PM defines in the same header.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531222409.9177-3-daniele.ceraolospurio@intel.com
Keep all the device-level PM management in intel_runtime_pm.h/c and move
all the display specific bits into their own file. Also add the new
header to Makefile.header-test.
Apart from the giant code move, the only difference is with the
intel_runtime_<get/put>_raw() functions, which are now exposed in the
header. The _put() version is also not conditionally compiled anymore
since it is ok to always pass the wakeref taken from the _get() to
__intel_runtime_pm_put (it is -1 if tracking is disabled).
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531222409.9177-2-daniele.ceraolospurio@intel.com
Currently, we try to report to the shrinker the precise number of
objects (pages) that are available to be reaped at this moment. This
requires searching all objects with allocated pages to see if they
fulfill the search criteria, and this count is performed quite
frequently. (The shrinker tries to free ~128 pages on each invocation,
before which we count all the objects; counting takes longer than
unbinding the objects!) If we take the pragmatic view that with
sufficient desire, all objects are eventually reapable (they become
inactive, or no longer used as framebuffer etc), we can simply return
the count of pinned pages maintained during get_pages/put_pages rather
than walk the lists every time.
The downside is that we may (slightly) over-report the number of
objects/pages we could shrink and so penalize ourselves by shrinking
more than required. This is mitigated by keeping the order in which we
shrink objects such that we avoid penalizing active and frequently used
objects, and if memory is so tight that we need to free them we would
need to anyway.
v2: Only expose shrinkable objects to the shrinker; a small reduction in
not considering stolen and foreign objects.
v3: Restore the tracking from a "backup" copy from before the gem/ split
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-2-chris@chris-wilson.co.uk
Currently the purgeable objects, I915_MADV_DONTNEED, are mixed in the
normal bound/unbound lists. Every shrinker pass starts with an attempt
to purge from this set of unneeded objects, which entails us doing a
walk over both lists looking for any candidates. If there are none, and
since we are shrinking we can reasonably assume that the lists are
full!, this becomes a very slow futile walk.
If we separate out the purgeable objects into own list, this search then
becomes its own phase that is preferentially handled during shrinking.
Instead the cost becomes that we then need to filter the purgeable list
if we want to distinguish between bound and unbound objects.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-1-chris@chris-wilson.co.uk
The i915.alpha_support module parameter has caused some confusion along
the way. Add new i915.force_probe parameter to specify PCI IDs of
devices to probe, when the devices are recognized but not automatically
probed by the driver. The name is intended to reflect what the parameter
effectively does, avoiding any overloaded semantics of "alpha" and
"support".
The parameter supports "" to disable, "<pci-id>,[<pci-id>,...]" to
enable force probe for one or more devices, and "*" to enable force
probe for all known devices.
Also add new CONFIG_DRM_I915_FORCE_PROBE config option to replace the
DRM_I915_ALPHA_SUPPORT option. This defaults to "*" if
DRM_I915_ALPHA_SUPPORT=y.
Instead of replacing i915.alpha_support immediately, let the two coexist
for a while, with a deprecation message, for a transition period.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506134801.28751-1-jani.nikula@intel.com
In order to support driver hot unbind, some cleanup operations, now
performed on PCI driver remove, must be called later, after all device
file descriptors are closed.
Split out those operations from the tail of pci_driver.remove()
callback and put them into drm_driver.release() which is called as soon
as all references to the driver are put. As a result, those cleanups
will be now run on last drm_dev_put(), either still called from
pci_driver.remove() if all device file descriptors are already closed,
or on last drm_release() file operation.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530133105.30467-1-janusz.krzysztofik@linux.intel.com
Out scatterlist utility routines can be pulled out of i915_gem.h for a
bit more decluttering.
v2: Push I915_GTT_PAGE_SIZE out of i915_scatterlist itself and into the
caller.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-9-chris@chris-wilson.co.uk
Currently the code for manipulating the pages on an object is still
residing in i915_gem.c, move it to i915_gem_object.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-3-chris@chris-wilson.co.uk
For convenience in avoiding inline spaghetti, keep the type definition
as a separate header.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-1-chris@chris-wilson.co.uk
Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too
quickly. For example, igt sets the autosuspend delay to 0, and so we
immediately attempt to perform runtime suspend upon releasing the
wakeref. Unfortunately, that involves tearing down GGTT mmaps as they
require an active device.
Override the autosuspend for GGTT mmaps, by keeping the wakeref around
for 250ms after populating the PTE for a fresh mmap.
v2: Prefer refcount_t for its under/overflow error detection
v3: Flush the user runtime autosuspend prior to system system.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527115114.13448-1-chris@chris-wilson.co.uk
ICL has so many planes that it can easily exceed the maximum
effective memory bandwidth of the system. We must therefore check
that we don't exceed that limit.
The algorithm is very magic number heavy and lacks sufficient
explanation for now. We also have no sane way to query the
memory clock and timings, so we must rely on a combination of
raw readout from the memory controller and hardcoded assumptions.
The memory controller values obviously change as the system
jumps between the different SAGV points, so we try to stabilize
it first by disabling SAGV for the duration of the readout.
The utilized bandwidth is tracked via a device wide atomic
private object. That is actually not robust because we can't
afford to enforce strict global ordering between the pipes.
Thus I think I'll need to change this to simply chop up the
available bandwidth between all the active pipes. Each pipe
can then do whatever it wants as long as it doesn't exceed
its budget. That scheme will also require that we assume that
any number of planes could be active at any time.
TODO: make it robust and deal with all the open questions
v2: Sleep longer after disabling SAGV
v3: Poll for the dclk to get raised (seen it take 250ms!)
If the system has 2133MT/s memory then we pointlessly
wait one full second :(
v4: Use the new pcode interface to get the qgv points rather
that using hardcoded numbers
v5: Move the pcode stuff into intel_bw.c (Matt)
s/intel_sagv_info/intel_qgv_info/
Do the NV12/P010 as per spec for now (Matt)
s/IS_ICELAKE/IS_GEN11/
v6: Ignore bandwidth limits if the pcode query fails
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524153614.32410-1-ville.syrjala@linux.intel.com
To overcome display engine stride limits we'll want to remap the
pages in the GTT. To that end we need a new gtt_view type which
is just like the "rotated" type except not rotated.
v2: Use intel_remapped_plane_info base type
s/unused/unused_mbz/ (Chris)
Separate BUILD_BUG_ON()s (Chris)
Use I915_GTT_PAGE_SIZE (Chris)
v3: Use i915_gem_object_get_dma_address() (Chris)
Trim the sg (Tvrtko)
v4: Actually trim this time. Limit the max length
to one row of pages to keep things simple
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
By disabling a power domain asynchronously we can restrict holding a
reference on that power domain to the actual code sequence that
requires the power to be on for the HW access it's doing, by also
avoiding unneeded on-off-on togglings of the power domain (since the
disabling happens with a delay).
One benefit is potential power saving due to the following two reasons:
1. The fact that we will now be holding the reference only for the
necessary duration by the end of the patchset. While simply not
delaying the disabling has the same benefit, it has the problem that
frequent on-off-on power switching has its own power cost (see the 2.
point below) and the debug trace for power well on/off events will
cause a lot of dmesg spam (see details about this further below).
2. Avoiding the power cost of freuqent on-off-on power switching. This
requires us to find the optimal disabling delay based on the measured
power cost of on->off and off->on switching of each power well vs.
the power of keeping the given power well on.
In this patchset I'm not providing this optimal delay for two
reasons:
a) I don't have the means yet to perform the measurement (with high
enough signal-to-noise ratio, or with the help of an energy
counter that takes switching into account). I'm currently looking
for a way to measure this.
b) Before reducing the disabling delay we need an alternative way for
debug tracing powerwell on/off events. Simply avoiding/throttling
the debug messages is not a solution, see further below.
Note that even in the case where we can't measure any considerable
power cost of frequent on-off switching of powerwells, it still would
make sense to do the disabling asynchronously (with 0 delay) to avoid
blocking on the disabling. On VLV I measured this disabling time
overhead to be 1ms on average with a worst case of 4ms.
In the case of the AUX power domains on ICL we would also need to keep
the sequence where we hold the power reference short, the way it would
be by the end of this patchset where we hold it only for the actual AUX
transfer. Anything else would make the locking we need for ICL TypeC
ports (whenever we hold a reference on any AUX power domain) rather
problematic, adding for instance unnecessary lockdep dependencies to
the required TypeC port lock.
I chose the disabling delay to be 100msec for now to avoid the unneeded
toggling (and so not to introduce dmesg spamming) in the DP MST sideband
signaling code. We could optimize this delay later, once we have the
means to measure the switching power cost (see above).
Note that simply removing/throttling the debug tracing for power well
on/off events is not a solution. We need to know the exact spots of
these events and cannot rely only on incorrect register accesses caught
(due to not holding a wakeref at the time of access). Incorrect
powerwell enabling/disabling could lead to other problems, for instance
we need to keep certain powerwells enabled for the duration of modesets
and AUX transfers.
v2:
- Clarify the commit log parts about power cost measurement and the
problem of simply removing/throttling debug tracing. (Chris)
- Optimize out local wakeref vars at intel_runtime_pm_put_raw() and
intel_display_power_put_async() call sites if
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n. (Chris)
- Rebased on v2 of the wakeref w/o power-on guarantee patch.
- Add missing docbook headers.
v3:
- Checkpatch spelling/missing-empty-line fix.
v4:
- Fix unintended local wakeref var optimization when using
call-arguments with side-effects, by using inline funcs instead of
macros. In this patch in particular this will fix the
intel_display_power_grab_async_put_ref()->intel_runtime_pm_put_raw()
call).
No size change in practice (would be the same disregarding the
corresponding change in intel_display_power_grab_async_put_ref()):
$ size i915-macro.ko
text data bss dec hex filename
2455190 105890 10272 2571352 273c58 i915-macro.ko
$ size i915-inline.ko
text data bss dec hex filename
2455195 105890 10272 2571357 273c5d i915-inline.ko
Kudos to Stan for reporting the raw-wakeref WARNs this issue caused. His
config has CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n, which I didn't retest
after v1, and we are also not testing this config in CI.
Now tested both with CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y/n on ICL,
connecting both Chamelium and regular DP, HDMI sinks.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513192533.12586-1-imre.deak@intel.com
If the HW fails to ack a change in forcewake status, the machine is as
good as dead -- it may recover, but in reality it missed the mmio
updates and is now in a very inconsistent state. If it happens, we can't
trust the CI results (or at least the fails may be genuine but due to
the HW being dead and not the actual test!) so reboot the machine (CI
checks for a kernel taint in between each test and reboots if the
machine is tainted).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508115245.27790-1-chris@chris-wilson.co.uk
For us KBP is 100% identical to SPT. Kill the redundant enum
value. Also bspec doesn't talk about KBP either, so this might
avoid some confusion when cross checking the code against the
spec.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506152627.20283-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The original intent for the delay before running the idle_work was to
provide a hysteresis to avoid ping-ponging the device runtime-pm. Since
then we have also pulled in some memory management and general device
management for parking. But with the inversion of the wakeref handling,
GEM is no longer responsible for the wakeref and by the time we call the
idle_work, the device is asleep. It seems appropriate now to drop the
delay and just run the worker immediately to flush the cached GEM state
before sleeping.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-2-chris@chris-wilson.co.uk
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
While at it, rename intel_i2c.c to intel_gmbus.c and the functions to
intel_gmbus_*.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5834b8fbbfd4ac2e3d0159e69c87f6926066f537.1556809195.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2843b028d65e118dc40316aa84bf620a93f6c67b.1556809195.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9bc1317a67df0b9d019eca5b36f474b76a1cad26.1556809195.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9101a58b9f10bcf11332175e17b6e6e45f4ebd17.1556809195.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/876a1671a84c6839bcafdf276cf9c4e1da6c631c.1556809195.git.jani.nikula@intel.com
The workqueue code complains viciously if we try to queue more work onto
the queue while attampting to drain it. As we asynchronously free
objects and defer their enqueuing with RCU, it is quite tricky to
quiesce the system before attempting to drain the workqueue. Yet drain
we must to ensure that the worker is idle before unloading the module.
Give the freed object drain 3 whole passes with multiple rcu_barrier()
to give the defer freeing of several levels each protected by RCU and
needing a grace period before its parent can be freed, ultimately
resulting in a GEM object being freed after another RCU period.
A consequence is that it will make module unload even slower.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110550
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501135753.8711-1-chris@chris-wilson.co.uk
Make the engine responsible for cleaning itself up!
This removes the i915->gt.cleanup vfunc that has been annoying the
casual reader and myself for the last several years, and helps keep a
future patch to add more cleanup tidy.
v2: Assert that engine->destroy is set after the backend starts
allocating its own state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501103204.18632-1-chris@chris-wilson.co.uk
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6aea17072684dec0b04b6831c0c0e5a134edf87e.1556540890.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87904259868782c1ad664d852b27a50c1597cfaa.1556540890.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/76d2719b462004ec6f6f5c302ee5d3876357c599.1556540890.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e4fb1e67ed38870df3040bb0a1b1a58fd90cc86.1556540890.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the header remains self-contained, and do so with minimal further
includes, using forward declarations as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf9b17d56489e15d82356575037432ad04712475.1556540890.git.jani.nikula@intel.com
