Thanks to advanced RE of fglrx we finally know what exactly needs to be
handled of AFMT change.
This has been tested for possible regressions on:
1) DCE2 HD2400 (RV610)
2) DCE3 HD3470 (RV620)
For a reference and details see:
https://bugzilla.kernel.org/show_bug.cgi?id=76231
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recent RE efforts revealed ops performed by fglrx during HDMI setup.
This mostly adds masks to r/w ops plus few single missing bits.
This has been tested for possible regressions on:
1) DCE2 HD2400 (RV610)
2) DCE3 HD3470 (RV620)
For a reference and details see:
https://bugzilla.kernel.org/show_bug.cgi?id=76231
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
What initially seemed to be a typo in fglrx (using register 0x740c
instead of 0x74dc) appeared to be a correct behavior. DCE3 has ACR and
CRC registers swapped which explains why we needed
WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000);
This has been tested for possible regressions on DCE3 HD3470 (RV620).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE 3.1 and 3.2 should be programmed in a different way than DCE 2 and
DCE 3. The order of setting registers and sets of registers are
different.
It's still unsure how we will handle DCE 3.1 vs. DCE 3.2, since they
have few differences as well.
For now separate DCE 2 and DCE 3 path, so we can work on it without a
risk of breaking DCE 3.1+.
This has been tested for possible regressions on DCE32 HD4550 (RV710).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch makes it possible to decide how many address
bits are spend on the page directory vs the page tables.
v2: remove unintended change
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch implements support for VRAM page table entry compression.
PTE construction is enhanced to identify physically contiguous page
ranges and mark them in the PTE fragment field. L1/L2 TLB support is
enabled for 64KB (SI/CIK) and 256KB (NI) PTE fragments, significantly
improving TLB utilization for VRAM allocations.
Linear store bandwidth is improved from 60GB/s to 125GB/s on Pitcairn.
Unigine Heaven 3.0 sees an average improvement from 24.7 to 27.7 FPS
on default settings at 1920x1200 resolution with vsync disabled.
See main comment in radeon_vm.c for a technical description.
v2 (chk): rebased and simplified.
v3 (chk): add missing hw setup
v4 (chk): rebased on current drm-fixes-3.15
v5 (chk): fix comments and commit text
Signed-off-by: Jay Cornwall <jay@jcornwall.me>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The i2c and aux buses use the same pads so add
a mutex to protect access to the pads.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Now that drm core knows about private planes, it cleans them up for us.
Trying to do this twice results in badness.
Signed-off-by: Rob Clark <robdclark@gmail.com>
To ease debugging, add debugfs file which can be cat/tail'd to log
submits, along with fence #. If GPU hangs, you can look at 'gpu'
debugfs file to find last completed fence and current register state,
and compare with logged rd file to narrow down the DRAW_INDX which
triggered the GPU hang.
Signed-off-by: Rob Clark <robdclark@gmail.com>
- prep refactoring for execlists (Oscar Mateo)
- corner-case fixes for runtime pm (Imre)
- tons of vblank improvements from Ville
- prep work for atomic plane/sprite updates (Ville)
- more chv code, now almost complete (tons of different people)
- refactoring and improvements for drm_irq.c merged through drm-intel-next
- g4x/ilk reset improvements (Ville)
- removal of encoder->mode_set
- moved audio state tracking into pipe_config
- shuffled fb pinning out of the platform crtc modeset callbacks into core code
- userptr support (Chris)
- OOM handling improvements from Chris, with now have a neat oom notifier which
jumps additional debug information.
- topdown allocation of ppgtt PDEs (Ben)
- fixes and small improvements all over
* tag 'drm-intel-next-2014-05-23' of git://anongit.freedesktop.org/drm-intel: (187 commits)
drm/i915: Kill private_default_ctx off
drm/i915: s/i915_hw_context/intel_context
drm/i915: Split the ringbuffers from the rings (3/3)
drm/i915: Split the ringbuffers from the rings (2/3)
drm/i915: Split the ringbuffers from the rings (1/3)
drm/i915: s/intel_ring_buffer/intel_engine_cs
drm/i915: disable GT power saving early during system suspend
drm/i915: fix possible RPM ref leaking during RPS disabling
drm/i915: remove user GTT mappings early during runtime suspend
drm/i915: Implement WaVcpClkGateDisableForMediaReset:ctg, elk
drm/i915: Fix gen2 and hsw+ scanline counter
drm/i915: Draw a picture about video timings
drm/i915: Improve gen3/4 frame counter
drm/i915: Add a small adjustment to the pixel counter on interlaced modes
drm/i915: Hold CRTC lock whilst freezing the planes
drm/i915: Only discard backing storage on releasing the last ref
drm/i915: Wait for pending page flips before enabling/disabling the primary plane
drm/i915: grab the audio power domain when enabling audio on HSW+
drm/i915: don't read HSW_AUD_PIN_ELD_CP_VLD when the power well is off
drm/i915: move bsd dispatch index somewhere better
...
Commit f9b0e251df 'drm: make mode_valid callback optional' left variable ret
unused; remove it.
This fixes the following compilation warning:
drivers/staging/imx-drm/imx-tve.c: In function ‘imx_tve_connector_mode_valid’:
drivers/staging/imx-drm/imx-tve.c:252:6: warning: unused variable ‘ret’ [-Wunused-variable]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With this commit:
2a0788dc9b x86: Use clflushopt in drm_clflush_virt_range
If clflushopt is available on the system, we use it instead of clflush
in drm_clflush_virt_range. There were two calls to clflush in this
function, but only one was changed to clflushopt. This patch changes
the other clflush call to clflushopt.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: H Peter Anvin <h.peter.anvin@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Code should be indented using tabs rather than spaces (see CodingStyle)
and the canonical form to declare a constant static variable is using
"static const" rather than "const static". Fixes the following warnings
from checkpatch:
$ scripts/checkpatch.pl -f drivers/gpu/drm/drm_plane_helper.c
WARNING: storage class should be at the beginning of the declaration
#40: FILE: drivers/gpu/drm/drm_plane_helper.c:40:
+const static uint32_t safe_modeset_formats[] = {
WARNING: please, no spaces at the start of a line
#41: FILE: drivers/gpu/drm/drm_plane_helper.c:41:
+ DRM_FORMAT_XRGB8888,$
WARNING: please, no spaces at the start of a line
#42: FILE: drivers/gpu/drm/drm_plane_helper.c:42:
+ DRM_FORMAT_ARGB8888,$
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Include the drm_plane_helper.h header file to fix the following sparse
warnings:
CHECK drivers/gpu/drm/drm_plane_helper.c
drivers/gpu/drm/drm_plane_helper.c:102:5: warning: symbol 'drm_primary_helper_update' was not declared. Should it be static?
drivers/gpu/drm/drm_plane_helper.c:219:5: warning: symbol 'drm_primary_helper_disable' was not declared. Should it be static?
drivers/gpu/drm/drm_plane_helper.c:233:6: warning: symbol 'drm_primary_helper_destroy' was not declared. Should it be static?
drivers/gpu/drm/drm_plane_helper.c:241:30: warning: symbol 'drm_primary_helper_funcs' was not declared. Should it be static?
drivers/gpu/drm/drm_plane_helper.c:259:18: warning: symbol 'drm_primary_helper_create_plane' was not declared. Should it be static?
Doing that makes gcc complain as follows:
CC drivers/gpu/drm/drm_plane_helper.o
drivers/gpu/drm/drm_plane_helper.c:260:19: error: conflicting types for 'drm_primary_helper_create_plane'
struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
^
In file included from drivers/gpu/drm/drm_plane_helper.c:29:0:
include/drm/drm_plane_helper.h:42:19: note: previous declaration of 'drm_primary_helper_create_plane' was here
struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
^
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_create_plane':
drivers/gpu/drm/drm_plane_helper.c:274:11: warning: assignment discards 'const' qualifier from pointer target type
formats = safe_modeset_formats;
^
In file included from include/linux/linkage.h:6:0,
from include/linux/kernel.h:6,
from include/drm/drmP.h:45,
from drivers/gpu/drm/drm_plane_helper.c:27:
drivers/gpu/drm/drm_plane_helper.c: At top level:
drivers/gpu/drm/drm_plane_helper.c:289:15: error: conflicting types for 'drm_primary_helper_create_plane'
EXPORT_SYMBOL(drm_primary_helper_create_plane);
^
include/linux/export.h:57:21: note: in definition of macro '__EXPORT_SYMBOL'
extern typeof(sym) sym; \
^
drivers/gpu/drm/drm_plane_helper.c:289:1: note: in expansion of macro 'EXPORT_SYMBOL'
EXPORT_SYMBOL(drm_primary_helper_create_plane);
^
In file included from drivers/gpu/drm/drm_plane_helper.c:29:0:
include/drm/drm_plane_helper.h:42:19: note: previous declaration of 'drm_primary_helper_create_plane' was here
struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
^
Which can easily be fixed by making the signatures of the implementation
and the prototype match.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The recent commit [3ea87855: drm/helper: lock all around force mode
restore] introduced drm_modeset_lock_all() in
drm_helper_resume_force_mode() itself, while exynos driver takes this
lock before calling it. Move the function call outside the lock for
avoiding a deadlock.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The recent commit [3ea87855: drm/helper: lock all around force mode
restore] introduced drm_modeset_lock_all() in
drm_helper_resume_force_mode() itself, while ast driver still takes
this lock before calling it. Remove the caller side lock for avoid a
fatal deadlock.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only gma500 is still using this, once that's converted we can kill all
this code. If that conversion doesn't happen soonish I think we should
just move this helper code into the gma500 driver itself to avoid
abuse from new drivers.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch makes sure that exynos drm framework handles deferred
probe case correctly.
Sub drivers could be probed before resources, clock, regulator,
phy or panel, are ready for them so we should make sure that exynos
drm core waits until all resources are ready and sub drivers are
probed correctly.
Chagelog v2:
- Make sure that exynos drm core tries to bind sub drivers only in case that
they have a pair: crtc and encoder/connector components should be a pair.
- Remove unnecessary patch:
drm/exynos: mipi-dsi: consider panel driver-deferred probe
- Return error type correctly.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
There has been a number incidents recently where customers running KVM have
reported that VM hosts on different Hypervisors are unreachable. Based on
pcap traces we found that the bridge was broadcasting the ARP request out
onto the network. However some NICs have an inbuilt switch which on occasions
were broadcasting the VMs ARP request back through the physical NIC on the
Hypervisor. This resulted in the bridge changing ports and incorrectly learning
that the VMs mac address was external. As a result the ARP reply was directed
back onto the external network and VM never updated it's ARP cache. This patch
will notify the bridge command, after a fdb has been updated to identify such
port toggling.
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The exynos_hdmi.h has been used for the dedicated i2c drivers
that were already removed. Thus, the unnecessary exynos_hdmi.h
should be removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Skip locking checks in drm_helper_*_in_use() if they are called in panicking
path. See similar code in drm_warn_on_modeset_not_all_locked().
After panic information has been output, these WARN_ONs go off outputing a lot
of lines and scrolling the panic information out of the screen. Here is a
partial call trace showing how execution reaches them:
? drm_helper_crtc_in_use()
? __drm_helper_disable_unused_functions()
? several *_set_config functions
? drm_fb_helper_restore_fbdev_mode()
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Setting the power state prior to restoring the display
hardware leads to blank screens on some systems. Drop
the power state set from dpm resume. The power state
will get set as part of the mode set sequence. Also
add an explicit power state set after mode set resume
to cover PX and headless systems.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=76761
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
After 1e785f48d2 ("net: Start with correct mac_len in
skb_network_protocol") skb->mac_len is used as a start of the
calculation in skb_network_protocol() but that is not always correct. If
skb->protocol == 8021Q/AD, usually the vlan header is already inserted
in the skb (i.e. vlan reorder hdr == 0). Usually when the packet enters
dev_hard_xmit it has mac_len == 0 so we take 2 bytes from the
destination mac address (skb->data + VLAN_HLEN) as a type in
skb_network_protocol() and return vlan_depth == 4. In the case where TSO is
off, then the mac_len is set but it's == 18 (ETH_HLEN + VLAN_HLEN), so
skb_network_protocol() returns a type from inside the packet and
offset == 22. Also make vlan_depth unsigned as suggested before.
As suggested by Eric Dumazet, move the while() loop in the if() so we
can avoid additional testing in fast path.
Here are few netperf tests + debug printk's to illustrate:
cat netperf.tso-on.reorder-on.bugged
- Vlan -> device (reorder on, default, this case is okay)
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
192.168.3.1 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.00 7111.54
[ 81.605435] skb->len 65226 skb->gso_size 1448 skb->proto 0x800
skb->mac_len 0 vlan_depth 0 type 0x800
- Vlan -> device (reorder off, bad)
cat netperf.tso-on.reorder-off.bugged
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
192.168.3.1 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.00 241.35
[ 204.578332] skb->len 1518 skb->gso_size 0 skb->proto 0x8100
skb->mac_len 0 vlan_depth 4 type 0x5301
0x5301 are the last two bytes of the destination mac.
And if we stop TSO, we may get even the following:
[ 83.343156] skb->len 2966 skb->gso_size 1448 skb->proto 0x8100
skb->mac_len 18 vlan_depth 22 type 0xb84
Because mac_len already accounts for VLAN_HLEN.
After the fix:
cat netperf.tso-on.reorder-off.fixed
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
192.168.3.1 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.01 5001.46
[ 81.888489] skb->len 65230 skb->gso_size 1448 skb->proto 0x8100
skb->mac_len 0 vlan_depth 18 type 0x800
CC: Vlad Yasevich <vyasevic@redhat.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Daniel Borkman <dborkman@redhat.com>
CC: David S. Miller <davem@davemloft.net>
Fixes:1e785f48d29a ("net: Start with correct mac_len in
skb_network_protocol")
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull powerpc fix from Ben Herrenschmidt:
"Here's just one trivial patch to wire up sys_renameat2 which I seem to
have completely missed so far.
(My test build scripts fwd me warnings but miss the ones generated for
missing syscalls)"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Wire renameat2() syscall
Pull MIPS fixes from Ralf Baechle:
"A fair number of fixes across the field. Nothing terribly
complicated; the one liners in below changelog should be fairly
descriptive.
Noteworthy is the SB1 change which the result of changes to binutils
resulting in one big gas warning for most files being assembled as
well as the asid_cache and branch emulation fixes which fix corruption
or possible uninteded behaviour of kernel or application code. The
remainder of fixes are more platforms or subsystem specific"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: R46000: Fix Micro-assembler field overflow for R4600 V2
MIPS: ptrace: Avoid smp_processor_id() in preemptible code
MIPS: Lemote 2F: cs5536: mfgpt: use raw locks
MIPS: SB1: Fix excessive kernel warnings.
MIPS: RC32434: fix broken PCI resource initialization
MIPS: malta: memory.c: Initialize the 'memsize' variable
MIPS: Fix typo when reporting cache and ftlb errors for ImgTec cores
MIPS: Fix inconsistancy of __NR_Linux_syscalls value
MIPS: Fix branch emulation of branch likely instructions.
MIPS: Fix a typo error in AUDIT_ARCH definition
MIPS: Change type of asid_cache to unsigned long
Pull scheduler fixes from Ingo Molnar:
"Various fixlets, mostly related to the (root-only) SCHED_DEADLINE
policy, but also a hotplug bug fix and a fix for a NR_CPUS related
overallocation bug causing a suspend/resume regression"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix hotplug vs. set_cpus_allowed_ptr()
sched/cpupri: Replace NR_CPUS arrays
sched/deadline: Replace NR_CPUS arrays
sched/deadline: Restrict user params max value to 2^63 ns
sched/deadline: Change sched_getparam() behaviour vs SCHED_DEADLINE
sched: Disallow sched_attr::sched_policy < 0
sched: Make sched_setattr() correctly return -EFBIG
The patch removes dependency on !ARCH_MULTIPLATFORM.
This dependency seems to be not longer valid.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch implements the power on/off sequence
of HDMI PHY in exynos5420 and exynos5250 as provided
by the hardware team.
This has been verified for mulitple iterations of
S2R.
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
ipp_id field is removed from exynos_drm_ippdrv struct.
The patch removes its description as well.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The attribute gem_objs in struct drm_exynos_ipp_buf_info was
changed to handles. So the comment needs to be updated also.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The c_node->event_list should be protected with
c_node->event_lock.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The c_node->mem_list[] should be protected with
c_node->mem_lock.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds ipp_remove_id() for idr resource free.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds cmd_lock for cmd_list synchronization.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The ippdrv->cmd_list requires cmd_lock.
So renames cmd_lock to lock for context.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes duplicated setting.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.cho@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
list_for_each_entry() handles empty lists, so there is no
need to check whether the list is empty first.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
