Going through the currently programmed payloads isn't safe without
holding mgr->payload_lock, so actually do that and warn if anyone tries
calling nv50_msto_payload() in the future without grabbing the right
locks.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-17-lyude@redhat.com
Same as we did for i915, but for nouveau this time. Additionally, we
grab a malloc reference to the port that lasts for the entire lifetime
of nv50_mstc, which gives us the guarantee that mstc->port will always
point to valid memory for as long as the mstc stays around.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-16-lyude@redhat.com
Now that we finally have a sane way to keep port allocations around, use
it to fix the potential unchecked ->port accesses that nouveau makes by
making sure we keep the mst port allocated for as long as it's
drm_connector is accessible.
Additionally, now that we've guaranteed that mstc->port is allocated for
as long as we keep mstc around we can remove the connector registration
checks for codepaths which release payloads, allowing us to release
payloads on active topologies properly. These registration checks were
only required before in order to avoid situations where mstc->port could
technically be pointing at freed memory.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-15-lyude@redhat.com
There is no need to look at the port's VCPI allocation before calling
drm_dp_mst_deallocate_vcpi(), as we already have msto->disabled to let
us avoid cleaning up an msto more then once. The DP MST core will never
call drm_dp_mst_deallocate_vcpi() on it's own, which is presumably what
these checks are meant to protect against.
More importantly though, we're about to stop clearing mstc->port in the
next commit, which means if we could potentially hit a use-after-free
error if we tried to check mstc->port->vcpi here. So to make life easier
for anyone who bisects this code in the future, use msto->disabled
instead to check whether or not we need to deallocate VCPI instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-14-lyude@redhat.com
Trying to destroy the connector using mstc->connector.funcs->destroy()
if connector initialization fails is wrong: there is no possible
codepath in nv50_mstc_new where nv50_mstm_add_connector() would return
<0 and mstc would be non-NULL.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-13-lyude@redhat.com
Just like i915 and nouveau, it's a good idea for us to hold a malloc
reference to the port here so that we never pass a freed pointer to any
of the DP MST helper functions.
Also, we stop unsetting aconnector->port in
dm_dp_destroy_mst_connector(). There's literally no point to that
assignment that I can see anyway.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-12-lyude@redhat.com
So that the ports stay around until we've destroyed the connectors, in
order to ensure that we don't pass an invalid pointer to any MST helpers
once we introduce the new MST VCPI helpers.
Changes since v1:
* Move drm_dp_mst_get_port_malloc() to where we assign
intel_connector->port - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-11-lyude@redhat.com
Up until now, freeing payloads on remote MST hubs that just had ports
removed has almost never worked because we've been relying on port
validation in order to stop us from accessing ports that have already
been freed from memory, but ports which need their payloads released due
to being removed will never be a valid part of the topology after
they've been removed.
Since we've introduced malloc refs, we can replace all of the validation
logic in payload helpers which are used for deallocation with some
well-placed malloc krefs. This ensures that regardless of whether or not
the ports are still valid and in the topology, any port which has an
allocated payload will remain allocated in memory until it's payloads
have been removed - finally allowing us to actually release said
payloads correctly.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-10-lyude@redhat.com
This has never actually worked, and isn't needed anyway: the driver's
always going to try to deallocate VCPI when it tears down the display
that the VCPI belongs to.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-9-lyude@redhat.com
While this isn't a complete fix, this will improve the reliability of
drm_dp_get_last_connected_port_and_mstb() pretty significantly during
hotplug events, since there's a chance that the in-memory topology tree
may not be fully updated when drm_dp_get_last_connected_port_and_mstb()
is called and thus might end up causing our search to fail on an mstb
whose topology refcount has reached 0, but has not yet been removed from
it's parent.
Ideally, we should further fix this problem by ensuring that we deal
with the potential for racing with a hotplug event, which would look
like this:
* drm_dp_payload_send_msg() retrieves the last living relative of mstb
with drm_dp_get_last_connected_port_and_mstb()
* drm_dp_payload_send_msg() starts building payload message
At the same time, mstb gets unplugged from the topology and is no
longer the actual last living relative of the original mstb
* drm_dp_payload_send_msg() tries sending the payload message, hub times
out
* Hub timed out, we give up and run away-resulting in the payload being
leaked
This could be fixed by restarting the
drm_dp_get_last_connected_port_and_mstb() search whenever we get a
timeout, sending the payload to the new mstb, then repeating until
either the entire topology is removed from the system or
drm_dp_get_last_connected_port_and_mstb() fails. But since the above
race condition is not terribly likely, we'll address that in a later
patch series once we've improved the recovery handling for VCPI
allocations in the rest of the DP MST helpers.
Changes since v1:
* Convert kerneldoc for drm_dp_get_last_connected_port_and_mstb to
normal comment - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-8-lyude@redhat.com
The current way of handling refcounting in the DP MST helpers is really
confusing and probably just plain wrong because it's been hacked up many
times over the years without anyone actually going over the code and
seeing if things could be simplified.
To the best of my understanding, the current scheme works like this:
drm_dp_mst_port and drm_dp_mst_branch both have a single refcount. When
this refcount hits 0 for either of the two, they're removed from the
topology state, but not immediately freed. Both ports and branch devices
will reinitialize their kref once it's hit 0 before actually destroying
themselves. The intended purpose behind this is so that we can avoid
problems like not being able to free a remote payload that might still
be active, due to us having removed all of the port/branch device
structures in memory, as per:
commit 91a25e4631 ("drm/dp/mst: deallocate payload on port destruction")
Which may have worked, but then it caused use-after-free errors. Being
new to MST at the time, I tried fixing it;
commit 263efde31f ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
But, that was broken: both drm_dp_mst_port and drm_dp_mst_branch structs
are validated in almost every DP MST helper function. Simply put, this
means we go through the topology and try to see if the given
drm_dp_mst_branch or drm_dp_mst_port is still attached to something
before trying to use it in order to avoid dereferencing freed memory
(something that has happened a LOT in the past with this library).
Because of this it doesn't actually matter whether or not we keep keep
the ports and branches around in memory as that's not enough, because
any function that validates the branches and ports passed to it will
still reject them anyway since they're no longer in the topology
structure. So, use-after-free errors were fixed but payload deallocation
was completely broken.
Two years later, AMD informed me about this issue and I attempted to
come up with a temporary fix, pending a long-overdue cleanup of this
library:
commit c54c7374ff ("drm/dp_mst: Skip validating ports during destruction, just ref")
But then that introduced use-after-free errors, so I quickly reverted
it:
commit 9765635b30 ("Revert "drm/dp_mst: Skip validating ports during destruction, just ref"")
And in the process, learned that there is just no simple fix for this:
the design is just broken. Unfortunately, the usage of these helpers are
quite broken as well. Some drivers like i915 have been smart enough to
avoid accessing any kind of information from MST port structures, but
others like nouveau have assumed, understandably so, that
drm_dp_mst_port structures are normal and can just be accessed at any
time without worrying about use-after-free errors.
After a lot of discussion, me and Daniel Vetter came up with a better
idea to replace all of this.
To summarize, since this is documented far more indepth in the
documentation this patch introduces, we make it so that drm_dp_mst_port
and drm_dp_mst_branch structures have two different classes of
refcounts: topology_kref, and malloc_kref. topology_kref corresponds to
the lifetime of the given drm_dp_mst_port or drm_dp_mst_branch in it's
given topology. Once it hits zero, any associated connectors are removed
and the branch or port can no longer be validated. malloc_kref
corresponds to the lifetime of the memory allocation for the actual
structure, and will always be non-zero so long as the topology_kref is
non-zero. This gives us a way to allow callers to hold onto port and
branch device structures past their topology lifetime, and dramatically
simplifies the lifetimes of both structures. This also finally fixes the
port deallocation problem, properly.
Additionally: since this now means that we can keep ports and branch
devices allocated in memory for however long we need, we no longer need
a significant amount of the port validation that we currently do.
Additionally, there is one last scenario that this fixes, which couldn't
have been fixed properly beforehand:
- CPU1 unrefs port from topology (refcount 1->0)
- CPU2 refs port in topology(refcount 0->1)
Since we now can guarantee memory safety for ports and branches
as-needed, we also can make our main reference counting functions fix
this problem by using kref_get_unless_zero() internally so that topology
refcounts can only ever reach 0 once.
Changes since v4:
* Change the kernel-figure summary for dp-mst/topology-figure-1.dot a
bit - danvet
* Remove figure numbers - danvet
Changes since v3:
* Remove rebase detritus - danvet
* Split out purely style changes into separate patches - hwentlan
Changes since v2:
* Fix commit message - checkpatch
* s/)-1/) - 1/g - checkpatch
Changes since v1:
* Remove forward declarations - danvet
* Move "Branch device and port refcounting" section from documentation
into kernel-doc comments - danvet
* Export internal topology lifetime functions into their own section in
the kernel-docs - danvet
* s/@/&/g for struct references in kernel-docs - danvet
* Drop the "when they are no longer being used" bits from the kernel
docs - danvet
* Modify diagrams to show how the DRM driver interacts with the topology
and payloads - danvet
* Make suggested documentation changes for
drm_dp_mst_topology_get_mstb() and drm_dp_mst_topology_get_port() -
danvet
* Better explain the relationship between malloc refs and topology krefs
in the documentation for drm_dp_mst_topology_get_port() and
drm_dp_mst_topology_get_mstb() - danvet
* Fix "See also" in drm_dp_mst_topology_get_mstb() - danvet
* Rename drm_dp_mst_topology_get_(port|mstb)() ->
drm_dp_mst_topology_try_get_(port|mstb)() and
drm_dp_mst_topology_ref_(port|mstb)() ->
drm_dp_mst_topology_get_(port|mstb)() - danvet
* s/should/must in docs - danvet
* WARN_ON(refcount == 0) in topology_get_(mstb|port) - danvet
* Move kdocs for mstb/port structs inline - danvet
* Split drm_dp_get_last_connected_port_and_mstb() changes into their own
commit - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-7-lyude@redhat.com
s/drm_dp_get_validated_port_ref/drm_dp_mst_topology_get_port_validated/
s/drm_dp_put_port/drm_dp_mst_topology_put_port/
s/drm_dp_get_validated_mstb_ref/drm_dp_mst_topology_get_mstb_validated/
s/drm_dp_put_mst_branch_device/drm_dp_mst_topology_put_mstb/
This is a much more consistent naming scheme, and will make even more
sense once we redesign how the current refcounting scheme here works.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-6-lyude@redhat.com
Split some stuff across multiple lines
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-5-lyude@redhat.com
Fix some indenting, split some stuff across multiple lines.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-4-lyude@redhat.com
Split some stuff across multiple lines, remove some unnecessary braces
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-3-lyude@redhat.com
Reindent some stuff, and split some stuff across multiple lines so we
aren't going over the text width limit.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-2-lyude@redhat.com
Add the KMS plane rotation property to the DRM rockchip driver,
for SoCs RK3328, RK3368 and RK3399.
RK3288 only supports rotation at the display level (i.e. CRTC),
but for now we are only interested in plane rotation.
This commit only adds support for the value of reflect-y
and reflect-x (i.e. mirroring).
Note that y-mirroring is not compatible with YUV.
The following modetest commands would test this feature,
where 30 is the plane ID, and 49 = rotate_0 + relect_y + reflect_x.
X mirror:
modetest -s 43@33:1920x1080@XR24 -w 30:rotation:17
Y mirror:
modetest -s 43@33:1920x1080@XR24 -w 30:rotation:33
XY mirror:
modetest -s 43@33:1920x1080@XR24 -w 30:rotation:49
Signed-off-by: Daniele Castagna <dcastagna@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109185639.5093-4-ezequiel@collabora.com
This commit splits the registers for RK3288 from those
for RK3328, RK3368 and RK3399. It seems RK3288 does not
support plane x-y-mirroring, and so in order to support this
for the other SoCs, we need to have separate set of registers
for win0 and win1.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109185639.5093-3-ezequiel@collabora.com
Fix a small typo in the macros VOP argument. The macro argument
is currently wrongly named "x", and then never used. The code
built fine almost by accident, as the macros are always used
in a context where a proper "vop" symbol exists.
This fix is almost cosmetic, as the resulting code shouldn't change.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109185639.5093-2-ezequiel@collabora.com
Currently, YUV hardware overlays are converted to RGB using
a color space conversion different than BT.601.
The result is that colors of e.g. NV12 buffers don't match
colors of YUV hardware overlays.
In order to fix this, enable YUV2YUV and set appropriate coefficients
for formats such as NV12 to be displayed correctly.
This commit was tested using modetest, gstreamer and chromeos (hardware
accelerated video playback). Before the commit, tests rendering
with NV12 format resulted in colors not displayed correctly.
Test examples (Tested on RK3399 and RK3288 boards
connected to HDMI monitor):
$ modetest 39@32:1920x1080@NV12
$ gst-launch-1.0 videotestrc ! video/x-raw,format=NV12 ! kmssink
Signed-off-by: Daniele Castagna <dcastagna@chromium.org>
[ezequiel: rebase on linux-next and massage commit log]
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108214659.28794-1-ezequiel@collabora.com
Add support to async updates of cursors by using the new atomic
interface for that.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[updated for upstream]
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205123310.7965-1-helen.koike@collabora.com
The following happened when migrating an old fbdev driver to DRM:
The Integrator/CP PL111 supports 16BPP but only ARGB1555/ABGR1555
or XRGB1555/XBGR1555 i.e. the maximum depth is 15.
This makes the initialization of the framebuffer fail since
the code in drm_fb_helper_single_fb_probe() assigns the same value
to sizes.surface_bpp and sizes.surface_depth. I.e. it simply assumes
a 1-to-1 mapping between BPP and depth, which is true in most cases
but not for this hardware that only support odd formats.
To support the odd case of a driver supporting 16BPP with only 15
bits of depth, this patch will make the code loop over the formats
supported on the primary plane on each CRTC managed by the FB
helper and cap the depth to the maximum supported on any primary
plane.
On the PL110 Integrator, this makes drm_mode_legacy_fb_format()
select DRM_FORMAT_XRGB1555 which is acceptable for this driver, and
thus we get framebuffer, penguin and console on the Integrator/CP.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110114049.10618-1-linus.walleij@linaro.org
Move the CEA-861 QS bit handling entirely into the edid code. No
need to bother the drivers with this.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVERS FOR VC4)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-4-ville.syrjala@linux.intel.com
Fill out the AVI infoframe quantization range bits using
drm_hdmi_avi_infoframe_quant_range() instead of hand rolling it.
This changes the behaviour slightly as
drm_hdmi_avi_infoframe_quant_range() will set a non-zero Q bit
even when QS==0 iff the Q bit matched the default quantization
range for the given mode. This matches the recommendation in
HDMI 2.0 and is allowed even before that.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-3-ville.syrjala@linux.intel.com
Fill out the AVI infoframe quantization range bits using
drm_hdmi_avi_infoframe_quant_range() for SDVO HDMI encoder as well.
This changes the behaviour slightly as
drm_hdmi_avi_infoframe_quant_range() will set a non-zero Q bit
even when QS==0 iff the Q bit matched the default quantization
range for the given mode. This matches the recommendation in
HDMI 2.0 and is allowed even before that.
v2: Pimp commit msg (DK)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-2-ville.syrjala@linux.intel.com
Make life easier for drivers by simply passing the connector
to drm_hdmi_avi_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range(). That way drivers don't
need to worry about is_hdmi2_sink mess.
v2: Make is_hdmi2_sink() return true for sil-sii8620
Adapt to omap/vc4 changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-1-ville.syrjala@linux.intel.com
Motivated by an oversight of mine when looking at the atomic bochs
conversion. For consistency also switch over to the same style as used
elsewhere (e.g. in drm_mode_set_config_internal).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110103045.26821-1-daniel.vetter@ffwll.ch
With all dependencies fixed we can now remove
drmP.h from drm_gem_cma_helper.h.
It is replaced by the include files required,
or forward declarations as appropritate.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-13-sam@ravnborg.org
drmP.h was the only header file in the past and a lot
of files rely on that drmP.h defines everything.
The goal is to one day to delete drmP.h and
as a step towards this it will no longer be included in the
headers files in include/drm/
To prepare tinydrm/ for this add dependencies that
othwewise was pulled in by drmP.h from drm_gem_cma_helper.h
To avoid that tinydrm.h became "include everything",
push include files to the individual drivers.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-12-sam@ravnborg.org
drmP.h was the only header file in the past and a lot
of files rely on that drmP.h defines everything.
The goal is to one day to delete drmP.h and
as a step towards this it will no longer be included in the
headers files in include/drm/
To prepare arc/ for this add dependencies that
othwewise was pulled in by drmP.h from drm_gem_cma_helper.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
[danvet: Fix typo in commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-10-sam@ravnborg.org
No further changes required.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-8-sam@ravnborg.org
drmP.h is an relic from the days when there was a single header file.
To enable the removal of drmP.h from all users drop include
of drmP.h from bridge/dw_hdmi.h.
A few files relied on the file included in drmP.h - add explicit
include statements or forward declarations to these files.
Build tested with arm and x86.
v2:
- prefer forward declarations when possible (Laurent Pinchart)
- sort include files (Laurent Pinchart)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-7-sam@ravnborg.org
The gem drivers use shmemfs to allocate backing storage for gem objects.
On Samsung Chromebook Plus, the drm/rockchip driver may call
rockchip_gem_get_pages -> drm_gem_get_pages -> shmem_read_mapping_page
to pin a lot of pages, breaking the page reclaim mechanism and causing
oom-killer invocation.
E.g. when the size of a zone is 3.9 GiB, the inactive_ratio is 5. If
active_anon / inactive_anon < 5 and all pages in the inactive_anon lru
are pinned, page reclaim would keep scanning inactive_anon lru without
reclaiming memory. It breaks page reclaim when the rockchip driver only
pins about 1/6 of the anon lru pages.
Mark these pinned pages as unevictable to avoid the premature oom-killer
invocation. See also similar patch on i915 driver [1].
[1]: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk
Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108074517.209860-1-vovoy@chromium.org
Add forward declaration and pull in include
file to make drm_framebuffer.h self contained.
While add it order include files alphabetically.
The use of TASK_COMM_LEN is the reason for including sched.h.
I could not see any good way to avoid this dependency,
and users of drm_framebuffer.comm already use
TASK_COMM_LEN to check for length etc.
v2:
- Added forward declaration of drm_gem_object (Noralf)
- Added ack from Noralf
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-4-sam@ravnborg.org
Move DRM_SWITCH_POWER out of drmP.h to allow users
to get rid of the drmP include.
Moved to drm_device.h because drm_device.switch_power_state
is the only user.
Converted to enum and added sparse kerneldoc comments.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-3-sam@ravnborg.org
Updated comment style to kernel-doc format in drm_device.h
In struct drm_device there are 12 struct members without doc:
- registered
- filelist_mutex
- filelist
- irq
- vbl_lock
- event_lock
- hose
- sigdata
- sigdata.context
- sigdata.lock
- agp_buffer_map
- agp_buffer_token
They all need proper documentation, a task left for someone
that knows their usage.
drm_device is not plugged into Documentation/gpu/drm-internals.rst
as this would create a new load of warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-2-sam@ravnborg.org
Fixes: b312d8ca3a ("dma-buf: make fence sequence numbers 64 bit v2")
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXDOTqAAKCRDj7w1vZxhR
xZ8QAQD4j8m9Ea3bzY5Rr8BYUx1k+Cjj6Y6abZmot2rSvdyOHwD+JzJFIFAPZjdd
uOKhLnDlubaaoa6OGPDQShjl9p3gyQE=
=WQGO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-01-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: applied amdgpu merge fixup]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190108162152.GA25361@embeddedor
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the code around so the driver is probed the bus
.probe and removed from the bus .remove callbacks.
This commit is just a cleanup and shouldn't affect
functionality.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190108145930.15080-1-ezequiel@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
After drm_fb_helper_fbdev_setup calls drm_fb_helper_init,
"dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will
have some effect). After that, drm_fb_helper_initial_config is called
which may call the "fb_probe" driver callback.
This driver callback may call drm_fb_helper_defio_init (as is done by
drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs)
as documented. These are normally cleaned up on exit by
drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini.
If an error occurs after "fb_probe", but before setup is complete, then
calling just drm_fb_helper_fini will leak resources. This was triggered
by df2052cc92 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"):
[ 50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
[ 50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38)
[ 50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2
[ 50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0
[ 50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 4.20.0-rc7 #1
[ 50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0
...
[ 50.023155] Call Trace:
[ 50.023155] ? bochs_kms_fini+0x1e/0x30
[ 50.023155] ? bochs_unload+0x18/0x40
This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n.
Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian
Link: https://lkml.kernel.org/r/20181223004315.GA11455@al
Fixes: 8741216396 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nl
If register_framebuffer() fails during fbdev setup we will leak the
framebuffer, the GEM buffer and the shadow buffer for defio. This is
because drm_fb_helper_fbdev_setup() just calls drm_fb_helper_fini() on
error not taking into account that register_framebuffer() can fail.
Since the generic emulation uses DRM client for its framebuffer and
backing buffer in addition to a shadow buffer, it's necessary to open code
drm_fb_helper_fbdev_setup() to properly handle the error path.
Error cleanup is removed from .fb_probe and is handled by one function for
all paths.
Fixes: 9060d7f493 ("drm/fb-helper: Finish the generic fbdev emulation")
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105181846.26495-1-noralf@tronnes.org
