The ETF input should be connected to the funnel output, and the ETF
output should be connected to the replicator input. The labels are wrong
and these got swapped:
Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional
Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional
Fixes: 7c10da3736 ("arm64: dts: qcom: Add msm8916 CoreSight components")
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Access to UART0 is disabled by bootloaders. By leaving it enabled by
default would reboot the board.
Disable this for now, this would alteast give a board which boots.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This is a branch with a few merge requests that either came in late, or
took a while longer for us to review and merge than usual and thus cut
it a bit close to the merge window. We stage them in a separate branch
and if things look good, we still send them up -- and that's the case
here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface.
-----BEGIN PGP SIGNATURE-----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=RUL0
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in late,
or took a while longer for us to review and merge than usual and thus
cut it a bit close to the merge window. We stage them in a separate
branch and if things look good, we still send them up -- and that's
the case here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
arm64: dts: renesas: salvator-common: Add ADV7482 support
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
...
As always, a large number of DT updates. Too many to enumerate them all,
but at a glance:
New SoCs introduced in this release:
- Amlogic:
+ Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set
top boxes and other products.
- Mediatek:
+ MT7623A, which is a flavor of the MT7623 family with other on-chip
ethernet options.
- Qualcomm:
+ SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
(Cortex-A75/A55 derivative) SoC that's one of the current high-end
mobile SoCs.
It's great to see mainline support for it. So far, you
can't do much with it, since a lot of peripherals are not yet in the
DTs but driver support for USB, GPU and other pieces are starting to
trickle in. This might end up being a well-supported SoC upstream if
the momentum keeps up.
- Renesas:
+ R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted
SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly
awaiting more. So far, basic drivers such as serial, gpios, PMU and
ethernet are enabled.
+ R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
GPU. Same here, basic set of drivers such as serial, gpios and ethernet
enabled, and SMP support is also forthcoming.
- STMicroelectronics:
+ STM32F469, very similar tih STM32F429 but with display support
Enhancements to SoCs/platforms (DTS contents, some driver portions might
not be in yet):
- Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
- Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
- Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
- Marvell Berlin2CD: SMP support, thermal sensors
- Mediatek MT7623: Highspeed DMA, audio support
- Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
- Renesas: Watchdog and PMU support across many platforms
- Rockchip RK3399: USB3 OTG support
- Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
- STMicro STM32: Lots of peripherals added to STM32MP175C
- Uniphier: Ethernet support
New boards:
- Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
- Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
- Allwinner A33: Nintendo NES/SuperNES Classic Edition
- Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
- Berlin2CD: Valve Steam Link
- Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
- Broadcom: Raspberry Pi 3 B+
- Mediatek MT7623N and MT7623A: reference boards
- Meson 8M2: Tronsmart MXIII Plus
- NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
- Qualcomm MSM8974: Sony Xperia Z1 Compact support
- Qualcomm SDM845: MTP development board
- Renesas: Ebisu R8A77990 board
- Renesas RZ/G1C: iwg23s: iWave G235-SDB
- TI am335x: Pocketbeagle support
-----BEGIN PGP SIGNATURE-----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=jLvk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Olof Johansson:
"As always, a large number of DT updates. Too many to enumerate them
all, but at a glance:
New SoCs introduced in this release:
- Amlogic:
+ Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
set top boxes and other products.
- Mediatek:
+ MT7623A, which is a flavor of the MT7623 family with other
on-chip ethernet options.
- Qualcomm:
+ SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
(Cortex-A75/A55 derivative) SoC that's one of the current
high-end mobile SoCs.
It's great to see mainline support for it. So far, you can't do
much with it, since a lot of peripherals are not yet in the DTs
but driver support for USB, GPU and other pieces are starting to
trickle in. This might end up being a well-supported SoC
upstream if the momentum keeps up.
- Renesas:
+ R8A77990, a.k.a R-Car E3, a new automotive
entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
enabled, we are eagerly awaiting more. So far, basic drivers
such as serial, gpios, PMU and ethernet are enabled.
+ R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
GPU. Same here, basic set of drivers such as serial, gpios and
ethernet enabled, and SMP support is also forthcoming.
- STMicroelectronics:
+ STM32F469, very similar tih STM32F429 but with display support
Enhancements to SoCs/platforms (DTS contents, some driver portions
might not be in yet):
- Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
- Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
- Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
- Marvell Berlin2CD: SMP support, thermal sensors
- Mediatek MT7623: Highspeed DMA, audio support
- Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
- Renesas: Watchdog and PMU support across many platforms
- Rockchip RK3399: USB3 OTG support
- Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
- STMicro STM32: Lots of peripherals added to STM32MP175C
- Uniphier: Ethernet support
New boards:
- Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
- Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
- Allwinner A33: Nintendo NES/SuperNES Classic Edition
- Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
- Berlin2CD: Valve Steam Link
- Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
- Broadcom: Raspberry Pi 3 B+
- Mediatek MT7623N and MT7623A: reference boards
- Meson 8M2: Tronsmart MXIII Plus
- NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
- Qualcomm MSM8974: Sony Xperia Z1 Compact support
- Qualcomm SDM845: MTP development board
- Renesas: Ebisu R8A77990 board
- Renesas RZ/G1C: iwg23s: iWave G235-SDB
- TI am335x: Pocketbeagle support"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
ARM: dts: aspeed: Fix hwrng register address
arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
arm64: dts: sprd: Add GPIO and GPIO keys device nodes
arm64: dts: sprd: fix typo in 'remote-endpoint'
arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
arm64: dts: fix regulator property name for wlan pcie endpoint
arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
ARM: dts: pxa3xx: fix MMC clocks
ARM: pxa: dts: add pin definitions for extended GPIOs
ARM: pxa: dts: add gpio-ranges to gpio controller
ARM: dts: ipq8074: Enable few peripherals for hk01 board
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Change the max opp frequency
...
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
* Cleanups:
- Corresct whitespace
- sort subnodes of the root and soc nodes
* R-Car M3-N (r8a77965) SoC
- Describe MSIOF SPI, PWM, SDHI and I2C devices in DT
- Add thermal support
* R-Car H3 (r8a7795) and R-Car M3-W (r8a7796) SoCs
- Decrease temperature hysteresis
Niklas Söderlund says "... decrease the hysteresis from 2C to 1C for
the two boards we have described upstream. They have no dependencies
and are ready to be accepted if the review is in favor of them."
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Add address properties to rcar_sound port nodes
The rcar_sound port nodes have unit names and thus should have register
properties.
* R-Car H3 (r8a7795), M3-W (r8a7796) V3M (r8a77970) and D3 (r8a77995) SoCs
- Enable IPMMU devices
Magnus Damm says "Following the policy of using DT to describe the
hardware and not software support state, this series makes sure all
IPMMU devices are enabled in DT for SoCs such as r8a7795, r8a7796,
r8a77970 and r8a77995."
* R-Car M3-N (r8a77965) and V3H (r8a77980) SoCs
- Use sysc binding macros
These can be used now that they are present in Linus's tree.
This is a simple replacement of numeric values with symbolic ones.
- Describe USB2 and USB3 devices in DT
* R-Car V3M (r8a77970) SoC
- Add SMP Support
Geert Uytterhoeven says "This patch series enables SMP support on the
R-Car V3M SoC, by adding the second Cortex-A53 CPU core. It also adds
the performance monitor unit, and links it to both CPU cores."
- Correct IPMMU DS1 bit number
Magnus Damm says "Judging by "R-Car-Gen3-rev0.80" IPMMU IMSSTR register
documentation for [R-Car V3M] the DS1 bit field should be bit 0."
* R-Car V3H (r8a77980) SoC
- Use CPG clock binding macros
These can be used now that they are present in Linus's tree.
This is a simple replacement of numeric values with symbolic ones.
* R-Car V3H (r8a77980) and V3M (r8a77970) SoCs
- Disable EtherAVB
Sergei Shtylov says "I'm fixing the issue in the EtherAVB device nodes
in the R8A779{7|8}0 device trees that missed the "status" prop, usually
disabling the SoC devices in anticipation that the board device trees
enable the devices according to their needs. There should be no issues
with the current R8A779{7|8}0 board device trees, as all of them use
EtherAVB anyway, so I'm sending the patches generated against the
'devel' branch..."
* R-Car D3 (r8a77995) SoC
- Describe VIN4 in DT
* Ebisu board with R-Car E3 (r8a77990) SoC
- Initial support:
+ PSCI
+ CPU (single)
+ Cache controller
+ Main clocks and controller
+ Interrupt controller
+ Timer
+ PMU
+ Reset controller
+ Product register
+ System controller
+ UART for console
* Salvator-XS boards with R-Car H3 (r8a7795) SoC
- Enable USB2.0 channel 3
* Salvator-X and Salvator-XS boards with M3-N (r8a77965) SoC
- Enable DU
Kieran Bingham "This series enables the DU for the M3-N R8A77965 SoC,
and provides output on the VGA and HDMI connectors.
LVDS is not yet supported or tested."
* Salvator-X and Salvator-XS boards with
R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Enable nable VIN, CSI-2 and ADV7482
Niklas Söderlund says "This series enable capture for H3, M3-W, M3-N
Salvator-X and Salvator-XS boards. It also adds the VIN and CSI-2 nodes
for V3M, but as the ADV7482 is on the V3M expansion boards I have
chosen not include that enablement in this series."
- Add PMIC DDR Backup Power config
Geert Uytterhoeven says " The ROHM BD9571MWV PMIC on the Renesas
Salvator-X(S) and ULCB development boards supports DDR Backup Power,
which means that the DDR power rails can be kept powered while the main
SoC is powered down.
For this to function correctly, the DDR Backup Power configuration
must be described in DT, which is the topic of this series:
- The first patch adds the missing device node for the BD9571 PMIC on
the ULCB boards,
- The last two patches add DDR Backup Mode configuration for
Salvator-X(S) and ULCB."
- Add EEPROM
Wolfram Sang says "Add the EEPROM found on Salvator-X and -XS boards
for H3, M3-W, and M3-N on the IIC_DVFS bus."
- Enable HDMI Sound
* Salvator-X and Salvator-XS boards with
R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs, and
Draak board with R-Car D3 (r8a77995) SoC
- Consistently name EtherAVB mdio pin group
Geert Uytterhoeven says "When initial support was added for R-Car H3,
the MDIO pin was forgotten, and the MDC pin got its own group named
"mdc". During the addition of support for R-Car M3-W, this mistake was
noticed. But as R-Car H3 and M3-W are pin compatible, and can be
mounted on the same boards, the decision was made to just add the MDIO
pin to the existing "mdc" group. Later this was extended to R-Car H3
ES2.0, and M3-N, because of pin compatibility, and to R-Car D3, in the
name of consistency among R-Car Gen3 SoCs.
However, this decision keeps on being questioned when adding new SoC
support. Hence bite the bullet and admit our mistake, and rename the
pin group from "mdc" to "mdio", like on R-Car Gen2 SoCs."
* Ebisu board with R-Car E3 (r8a77990) SoC
- Initial support: Memory, Main crystal, Serial console
- Enable Ethernet
- Revise PSCI node
Yoshihiro Shimoda says "The basic support patch 2d2dbadba421 ("arm64:
dts: renesas: Add Renesas R8A77990 SoC support") lacks the compatible
"arm,psci-1.0" in the psci node."
- Revise cache controller node
Yoshihiro Shimoda says "The cache controller node should not have
unit-addresses and reg properties."
* V3HSK board with R-Car V3H (r8a77980) SoC
- Initial board device tree
Sergei Shtylov says "Add the initial device tree for the V3H Starter
Kit board. The board has 1 debug serial port (SCIF0); include support
for it, so that the serial console can work."
- Enable PFC support and use for EtherAVB
* V3MSK board with R-Car V3M (r8a77970) SoC
- Add DU/LVDS/HDMI support
Sergei Shtylyov says "Define the V3M Starter Kit board dependent part
of the DU and LVDS device nodes. Also add the device nodes for Thine
THC63LVD1024 LVDS decoder and Analog Devices ADV7511W HDMI
transmitter..."
- Enable PFC for EtherAVB
* Condor board with R-Car V3H (r8a77980) SoC
- Enable eMMC
Sergei Shtylyov says "We're adding the R8A77980 MMC (SDHI)
device nodes and then enable eMMC support on the Condor board."
- Enable PFC support and use for EtherAVB and SCIF0
* Eagle board with R-Car V3M (r8a77970) SoC
- Enable HDMI output
* Eagle board with R-Car V3M (r8a77970) SoC and
Condor board with R-Car V3H (r8a77980) SoC
- Enable CAN-FD
Adds the CAN-FD device nodes so the DT SoC files and enables
single channel CAN-FD support in DT board files.
-----BEGIN PGP SIGNATURE-----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=4IoI
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late
Renesas ARM64 Based SoC DT Updates for v4.18
* Cleanups:
- Correct whitespace
- sort subnodes of the root and soc nodes
* R-Car M3-N (r8a77965) SoC
- Describe MSIOF SPI, PWM, SDHI and I2C devices in DT
- Add thermal support
* R-Car H3 (r8a7795) and R-Car M3-W (r8a7796) SoCs
- Decrease temperature hysteresis
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Add address properties to rcar_sound port nodes
* R-Car H3 (r8a7795), M3-W (r8a7796) V3M (r8a77970) and D3 (r8a77995) SoCs
- Enable IPMMU devices
* R-Car M3-N (r8a77965) and V3H (r8a77980) SoCs
- Use sysc binding macros
- Describe USB2 and USB3 devices in DT
* R-Car V3M (r8a77970) SoC
- Add SMP Support
- Correct IPMMU DS1 bit number
* R-Car V3H (r8a77980) SoC
- Use CPG clock binding macros
* R-Car V3H (r8a77980) and V3M (r8a77970) SoCs
- Disable EtherAVB
* R-Car D3 (r8a77995) SoC
- Describe VIN4 in DT
* Ebisu board with R-Car E3 (r8a77990) SoC
- Initial support
* Salvator-XS boards with R-Car H3 (r8a7795) SoC
- Enable USB2.0 channel 3
* Salvator-X and Salvator-XS boards with M3-N (r8a77965) SoC
- Enable DU
* Salvator-X and Salvator-XS boards with
R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Enable nable VIN, CSI-2 and ADV7482
- Add PMIC DDR Backup Power config
- Add EEPROM
- Enable HDMI Sound
* Salvator-X and Salvator-XS boards with
R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs, and
Draak board with R-Car D3 (r8a77995) SoC
- Consistently name EtherAVB mdio pin group
* Ebisu board with R-Car E3 (r8a77990) SoC
- Initial support: Memory, Main crystal, Serial console
- Enable Ethernet
- Revise PSCI node
- Revise cache controller node
* V3HSK board with R-Car V3H (r8a77980) SoC
- Initial board device tree
- Enable PFC support and use for EtherAVB
* V3MSK board with R-Car V3M (r8a77970) SoC
- Add DU/LVDS/HDMI support
- Enable PFC for EtherAVB
* Condor board with R-Car V3H (r8a77980) SoC
- Enable eMMC
- Enable PFC support and use for EtherAVB and SCIF0
* Eagle board with R-Car V3M (r8a77970) SoC
- Enable HDMI output
* Eagle board with R-Car V3M (r8a77970) SoC and
Condor board with R-Car V3H (r8a77980) SoC
- Enable CAN-FD
* tag 'renesas-arm64-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (102 commits)
arm64: dts: renesas: salvator-common: Add ADV7482 support
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
arm64: dts: renesas: r8a7795: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add I2C support
arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB
arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes
arm64: dts: renesas: r8a77990: Add GPIO device nodes
arm64: dts: renesas: r8a77990: Add PFC device node
arm64: dts: renesas: initial V3HSK board device tree
arm64: dts: renesas: r8a77980: disable EtherAVB
arm64: dts: renesas: r8a77970: disable EtherAVB
arm64: dts: renesas: r8a77995: Add VIN4
arm64: dts: renesas: r8a77980: add resets property to CAN-FD node
arm64: dts: renesas: r8a77970: Add Cortex-A53 PMU node
arm64: dts: renesas: r8a77970: Add secondary CA53 CPU core
arm64: dts: renesas: r8a77965: Add SDHI device nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch is a partial revert of
commit abd7d0972a ("arm64: dts: hikey: Enable HS200 mode on eMMC")
which has been causing eMMC corruption on my HiKey board.
Symptoms usually looked like:
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
...
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc0: new HS200 MMC card at address 0001
...
dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
print_req_error: I/O error, dev mmcblk0, sector 8810504
Aborting journal on device mmcblk0p10-8.
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
EXT4-fs error (device mmcblk0p10): ext4_journal_check_start:61: Detected aborted journal
EXT4-fs (mmcblk0p10): Remounting filesystem read-only
And quite often this would result in a disk that wouldn't properly
boot even with older kernels.
It seems the max-frequency property added by the above patch is
causing the problem, so remove it.
Cc: Ryan Grachek <ryan@edited.us>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei04@gmail.com>
Add the rtc enable clock for watchdog controller to make it work well.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds device nodes to enable one GPIO controller located on
digital chip, 2 EIC (external interrupt controller) controllers loacted
on PMIC and digital chip for Spreadtrum SC9860 platform.
Moreover this patch adds 3 GPIO keys relied on EIC controller to support
power key and volume up/down keys.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
dtc now warns on incomplete OF graph endpoint connections:
arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm@10006000/port/endpoint: graph connection to node '/soc/funnel@10001000/ports/port@2/endpoint' is not bidirectional
The cause is a typo in 'remote-endpoint'.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add clocks necessary for DECON hardware windows no 4 and 5 on
Exynos5433.
-----BEGIN PGP SIGNATURE-----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=6wYh
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM64 changes for v4.18, part 2
1. Add clocks necessary for DECON hardware windows no 4 and 5 on
Exynos5433.
* tag 'samsung-dt64-4.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add more clocks to Exynos5433 Decon/DeconTV
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----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=corl
-----END PGP SIGNATURE-----
Merge tag 'berlin64-dt-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into next/dt
Berlin64 DT changes for v4.18
* tag 'berlin64-dt-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
arm64: dts: move berlin SoC files from marvell dir to synaptics dir
arm64: dts: berlin4ct-*.dts: use SPDX-License-Identifier
arm64: dts: berlin4ct: use SPDX-License-Identifier
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add support for SDM845 and associated peripherals
* Fix gic_irq_domain_translation warnings on Qualcomm platforms
* Add binding for GENI SE, Qualcomm bluetooth, and Command DB
* Add support for SDHCI and ramoops on MSM8992
* Fixup qcom,pcie devices to pcie
* Add wlan, bluetooth, and micro SD supplies on db820c
* Add UFS related nodes on MSM8996
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pxUm
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.18
* Add support for SDM845 and associated peripherals
* Fix gic_irq_domain_translation warnings on Qualcomm platforms
* Add binding for GENI SE, Qualcomm bluetooth, and Command DB
* Add support for SDHCI and ramoops on MSM8992
* Fixup qcom,pcie devices to pcie
* Add wlan, bluetooth, and micro SD supplies on db820c
* Add UFS related nodes on MSM8996
* tag 'qcom-arm64-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: msm8996: Add ufs related nodes
arm64: dts: msm8996: fix gic_irq_domain_translate warnings
arm64: dts: qcom: sdm845: Sort nodes in the soc by address
arm64: dts: qcom: sdm845: Sort nodes in the reserved mem by address
arm64: dts: sdm845: Add command DB node
arm64: dts: sdm845: Fix xo_board clock name and speed
arm64: dts: qcom: Add SDM845 SMEM nodes
arm64: dts: qcom: Add APSS shared mailbox node to SDM845
arm64: dts: msm8916: fix gic_irq_domain_translate warnings
dt-bindings: introduce Command DB for QCOM SoCs
arm64: dts: apq8096-db820c: Add micro sd card supplies
dt-bindings: soc: qcom: Add device tree binding for GENI SE
dt-bindings: net: bluetooth: Add qualcomm-bluetooth
arm64: dts: apq8096-db820c: enable bluetooth node
arm64: dts: apq8096-db820c: Enable wlan and bt en pins
arm64: dts: qcom: rename qcom,pcie devices to pcie
arm64: dts: msm8992: add pstore-ramoops support
arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP
arm64: dts: Enable onboard SDHCI on msm8992
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch removes the unused bt-en-1-8v regulator and moves the
bt_en_gios claim to the pm8994_gpios node.
This bt_en_gpio could have been moved to the bluetooth serial node but
instead this node declares an 'enable' gpio addressing the bt_en_gpio.
This is needed by the Qualcomm QCA6174 WLAN/BT combo chip that needs to
have the bt_en_gpio claimed even if only WLAN is used.
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The property name vddpe-supply is not included in
Documentation/devicetree/bindings/pci/qcom,pcie.txt
nor in the pcie-qcom PCIe Root Complex driver.
This property name was used in an initial patchset for pcie-qcom,
but was renamed in a later revision.
Therefore, the regulator is currently never enabled, leaving us with
unoperational wlan.
Fix this by using the correct regulator property name, so that wlan
comes up correctly.
Fixes: 1c8ca74a2ea1 ("arm64: dts: apq8096-db820c: Enable wlan and bt en pins")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The UFS host controller occationally (20%) fails to enable
gcc_ufs_axi_clk because the UFS GDSC is not enabled. In most cases it's
enabled through the UFS phy driver, but to make sure it's enabled let's
enable it directly from the UFS host controller directly as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We mostly have some changes to support the H6, Allwinner latest SoC. We're
still in the preliminary phase, with I2C, pinctrl and clock support.
-----BEGIN PGP SIGNATURE-----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=d7Ql
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 changes for 4.18
We mostly have some changes to support the H6, Allwinner latest SoC. We're
still in the preliminary phase, with I2C, pinctrl and clock support.
* tag 'sunxi-dt64-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h6: add PCF8563 RTC on Pine H64 board
arm64: allwinner: h6: add R_I2C controller
arm64: allwinner: h6: add R_INTC interrupt controller
arm64: allwinner: h6: add node for R_PIO pin controller
arm64: allwinner: h6: add PRCM CCU device node
arm64: dts: allwinner: a64: bananapi-m64: add usb otg
arm64: dts: allwinner: axp803: Add drivevbus regulator
arm64: allwinner: h6: restore the usage of CCU slice macros
Signed-off-by: Olof Johansson <olof@lixom.net>
Here is our usual bunch of changes for the H3 and H5 SoCs that share the
same SoC design but with different CPUs.
This time, most of the changes are about supporting CPUFreq on these SoCs,
with voltage scaling being enabled for a number of boards.
-----BEGIN PGP SIGNATURE-----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=trdL
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3/H5 support for 4.18
Here is our usual bunch of changes for the H3 and H5 SoCs that share the
same SoC design but with different CPUs.
This time, most of the changes are about supporting CPUFreq on these SoCs,
with voltage scaling being enabled for a number of boards.
* tag 'sunxi-h3-h5-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: Add SY8106A regulator to Orange Pi PC
arm64: dts: allwinner: Add dts file for Libre Computer Board ALL-H3-CC H5 ver.
arm64: dts: allwinner: Sort dtb entries in Makefile
arm64: dts: allwinner: h5: Add cpu0 label for first cpu
ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver.
ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile
arm: dts: sun8i: h3: libretech-all-h3-cc: Move board definition to common dtsi
ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VCC-1V2 regulator voltage
ARM: dts: sun8i: h3: set the cpu-supply to VDD-CPUX on ALL-H3-CC H3 ver
ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VDD-CPUX voltage
ARM: dts: sun8i: h3: add SY8113B regulator used by Orange Pi One board
ARM: dts: sun8i: h2+: add SY8113B regulator used by Orange Pi Zero board
ARM: dts: sun8i: h3: add operating-points-v2 table for CPU
ARM: dts: sunxi: h3/h5: Add r_i2c I2C controller
ARM: dts: sunxi: h3/h5: Add r_i2c pinmux node
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add unit address for ls208xa-rdb SPI flash node matching 'reg'
property to fix DTC warning unit_address_vs_reg.
- Use hypen instead of underscore in aliases name for fsl-ls1012a to
fix DTC warning alias_paths.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbAYmKAAoJEFBXWFqHsHzOD9oIAJqlVIlArr2KZfqwLrPrfklv
xN/079g26XlJW9X1hff4sFXudLrwCBDP4FBjscDf9q1aO5Xpxx9BC4zTi5Pk51mY
hT7azoPYdee89aWzeAWWTJz7mqgu81gFIg1tmuyqFgm1TRfkpHM28oSAcMf7p9XX
ZC2cokKQ2sOlPUGnl9S26n4An2fRhxK4/tFNBD4KKm+HxNmSe9frPwkgtoX+8bdF
zL0jNQ6FtNnyWPD96p+cVjxB2CJmNf+F97v8tLRCG83W2ZLr9Hp1tIbzyhZ/hGEL
qTXMeyWD5ZKNY6tZtHyjkG+wGbq+BCTr3vIl/pgINc473fox2mmEzp4bMSZEumo=
=Lh6Z
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.18:
- Add unit address for ls208xa-rdb SPI flash node matching 'reg'
property to fix DTC warning unit_address_vs_reg.
- Use hypen instead of underscore in aliases name for fsl-ls1012a to
fix DTC warning alias_paths.
* tag 'imx-dt64-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: fsl-ls1012a: Fix DTC aliases warnings
arm64: dts: ls208xa-rdb: Pass unit name to SPI flash node
Signed-off-by: Olof Johansson <olof@lixom.net>
The driver/phy support for ipq8074 is available now.
So enabling the nodes in DT.
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add serial, i2c, bam, spi, qpic peripheral nodes.
While here, fix the PMU node's irq trigger to avoid
the boot warnings from GIC.
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- Allow using Armada 3700 gpio controller as interrupt one too
- Describe SPI flash on the EspressoBin
- Mark ahci as dma-coherent for Armada 7K/8K
- Add 10G interface support Armada 7K/8K based boards (including MacBin)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWv8DYwAKCRALBhiOFHI7
1XpdAKCGSSJQjUSkwu7luezYH9Hz0rRkkQCgoPNedba4WxKrKck5aIFiqHyaFBk=
=pUZZ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.18-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.18 (part 1)
- Allow using Armada 3700 gpio controller as interrupt one too
- Describe SPI flash on the EspressoBin
- Mark ahci as dma-coherent for Armada 7K/8K
- Add 10G interface support Armada 7K/8K based boards (including MacBin)
* tag 'mvebu-dt64-4.18-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: mark the gpio controllers as irq controller
arm64: dts: marvell: 7040-db: describe the 10G interface as fixed-link
arm64: dts: marvell: 8040-db: describe the 10G interfaces as fixed-link
arm64: dts: marvell: mcbin: enable the fourth network interface
arm64: dts: marvell: mcbin: add 10G SFP support
arm64: dts: marvell: mark CP110 ahci as dma-coherent
arm64: dts: armada-3720-espressobin: wire up spi flash
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add mailbox, stub clock, CPU frequency scaling, thermal cooling
management and pcie msi interruption support for hi3660
- Add LPC support for hip06 and hip07
- Add PCIe, usb and emmc support for hi3798cv200
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7lcf
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.18v2' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoC DT updates for 4.18v2
- Add mailbox, stub clock, CPU frequency scaling, thermal cooling
management and pcie msi interruption support for hi3660
- Add LPC support for hip06 and hip07
- Add PCIe, usb and emmc support for hi3798cv200
* tag 'hisi-arm64-dt-for-4.18v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi3798cv200: enable emmc support for poplar board
arm64: dts: hi3798cv200: enable usb2 support for poplar board
arm64: dts: hi3798cv200: enable PCIe support for poplar board
arm64: dts: hisi: Enable Hisi LPC node for hip07
arm64: dts: hisi: Enable Hisi LPC node for hip06
arm64: dts: hi3660: Add pcie msi interrupt attribute
arm64: dts: hi3660: Add thermal cooling management
arm64: dts: hi3660: Add CPU frequency scaling support
arm64: dts: hi3660: Add stub clock node
arm64: dts: hi3660: Add mailbox node
Signed-off-by: Olof Johansson <olof@lixom.net>
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.
As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.
As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
>From the hardware perspective, the actual pclk of the AO uarts
is the corresponding clkc_ao uart gate, not the main clock controller clk81.
This was not problem so far, because the uart_gate had
the CLK_IGNORE_UNUSED flag, which kept the gate open.
We plan to remove the CLK_IGNORE_UNUSED flag in another patch,
but before doing that, we need to fix the clock in the DTS file.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This add the AO (Always-On part) clock DT info for Meson-AXG SoC
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
[khilman: cleanup subject]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add all '1x' clocks to decon and decontv devices. Enabling those clocks
is needed to get proper display on hardware windows no 4 and 5.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The i2c AO is used for the MIC daughter card of the S400 board
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the pins related to the i2c AO controller of the meson-axg platform
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The clock specified for the i2c AO controller is the one for the EE
domain, which is incorrect as this controller needs the clock for AO
i2c controller.
Fixes: dc6f858e26 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Remove undocumented and unused "clk_i2c" clock name and the second
interrupt from i2c nodes of meson-axg platform. Those seems to have
been copy/pasted from the vendor kernel
Fixes: dc6f858e26 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the UFS QMP phy node and the UFS host controller node, now that we
have working UFS and the necessary clocks in place.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This is pure-churn and should be a no-op. I'm doing it in the hopes
of reducing merge conflicts. When things are sorted in a sane way
(and by base address seems sane) then it's less likely that future
patches will cause merge conflicts.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Let's keep the reserved-memory node tidy and neat and keep it sorted
by address. This should have no functional change.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add command DB node based on the bindings example.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The RPMh clock driver assumes that the xo_board clock is named
"xo_board", not "xo-board". Add a "clock-output-names" property to
the device tree to get the right name.
Also add the proper speed for the xo-clock as 38400000. This is
internally divided in RPMh clock driver to get "bi_tcxo" at 19200000.
After this change the clock tree in /sys/kernel/debug/clk/clk_summary
looks much better.
NOTES:
- Technically you could argue that this clock could belong in board
.dts files, not in the SoC one. However at the moment it's believed
that 100% of sdm845 boards will have an external clock at 38.4. It
can always be moved later if necessary.
- We could rename the "xo-board" device tree node to "xo_board" to
achieve the same effect as this patch. Presumably device-tree folks
would rather keep node names using dashes though.
- We could change the RPMh clock driver to use a dash to achieve the
same effect as this patch, but all other clocks in the clock tree
use underscores. It seems silly to change just this one.
Fixes: 7bafa643647f ("arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add all the necessary dt nodes to support SMEM driver
on SDM845. It also adds the required memory carveouts
so that the kernel does not access memory that is in
use.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
