Manipulating $(MAKECMDGOALS) for sub-make seems odd to me.
[1] 'make O=foo sub-make' is turned into 'make O=foo', which builds
the default targets. It would make sense to terminate the build with:
*** No rule to make target 'sub-make'. Stop.
[2] 'make O=foo defconfig _all' is turned into 'make O=foo defconfig',
which changes the behavior.
Let's pass $(MAKECMDGOALS) as is.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If you do "make Makefile" with GNU Make 3.x, the following warning
is displayed:
$ make Makefile
Makefile:165: warning: overriding recipe for target 'Makefile'
Makefile:51: warning: ignoring old recipe for target 'Makefile'
make[1]: Nothing to be done for 'Makefile'.
make: Nothing to be done for 'Makefile'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When you run a "make *config" target, the retpoline compiler flags
are evaluated for nothing because the code is located above the
'ifeq ($(config-targets),1)'.
Move it a bit below to avoid unneeded computation in the Kconfig stage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull core fixes from Thomas Gleixner:
"A small set of core updates:
- Make the watchdog respect the selected CPU mask again. That was
broken by the rework of the watchdog thread management and caused
inconsistent state and NMI watchdog being unstoppable.
- Ensure that the objtool build can find the libelf location.
- Remove dead kcore stub code"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Respect watchdog cpumask on CPU hotplug
objtool: Query pkg-config for libelf location
proc/kcore: Remove unused kclist_add_remap()
- Remove harmful -Oz option of Clang
- Get back the original behavior (no recursion for in-tree build)
for GNU Make 4.x
- Some minor fixes for coccinelle patches
- Do not overwrite .gitignore in the output directory in case
it is version-controlled
- Fix missed record-mcount bug for dynamic ftrace
- Fix endianness bug in modversions for relative CRC
- Cater to '^H' key code in Kconfig ncurses programs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6tE2
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove harmful -Oz option of Clang
- Get back the original behavior (no recursion for in-tree build) for
GNU Make 4.x
- Some minor fixes for coccinelle patches
- Do not overwrite .gitignore in the output directory in case it is
version-controlled
- Fix missed record-mcount bug for dynamic ftrace
- Fix endianness bug in modversions for relative CRC
- Cater to '^H' key code in Kconfig ncurses programs
* tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig/[mn]conf: handle backspace (^H) key
kbuild: modversions: Fix relative CRC byte order interpretation
scripts: coccinelle: Fix description of badty.cocci
kbuild: strip whitespace in cmd_record_mcount findstring
kbuild: do not overwrite .gitignore in output directory
kbuild: skip parsing pre sub-make code for recursion
coccinelle: put_device: reduce false positives
kbuild: skip sub-make for in-tree build with GNU Make 4.x
Revert "kbuild: use -Oz instead of -Os when using clang"
Commit 3a51ff3442 ("kbuild: gitignore output directory") seemed to
bother people who version-control output directories.
Andre Przywara says:
"Unfortunately this breaks my setup, because I keep a totally separate
git repository in my build directories to track (various versions of)
.config. So .gitignore there is carefully crafted to ignore most build
artefacts, but not .config, for instance."
Link: https://lkml.org/lkml/2019/3/22/1819
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
When Make recurses to the top Makefile with sub-make-done unset,
the code block surrounded by 'ifneq ($(sub-make-done),1) ... endif'
is parsed multiple times. This happens for in-tree building of
include/config/auto.conf, *-pkg, etc. with GNU Make 4.x.
This is a slight regression by commit 688931a5ad ("kbuild: skip
sub-make for in-tree build with GNU Make 4.x") in terms of performance
since that code block contains one $(shell ...) invocation.
Fix it by exporting the variable irrespective of sub-make being run.
I renamed it because GNU Make cannot properly export variables
containing hyphens. This is probably a bug of GNU Make, and the issue
in Kbuild had already been reported by commit 2bfbe7881e ("kbuild:
Do not use hyphen in exported variable name").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 2b50f7ab63 ("kbuild: add workaround for Debian make-kpkg")
annoyed people who want to wrap the top Makefile with GNUmakefile
to customize it for their use.
On second thought, we do not need to run the sub-make for in-tree
build with Make 4.x because the 'MAKEFLAGS += -rR' issue only happens
on GNU Make 3.x.
With this commit, people will get back their workflow, and the Debian
make-kpkg will still work.
Fixes: 2b50f7ab63 ("kbuild: add workaround for Debian make-kpkg")
Reported-by: Andreas Schwab <schwab@suse.de>
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Andreas Schwab <schwab@suse.de>
Tested-by: David Howells <dhowells@redhat.com>
The clang option -Oz enables *aggressive* optimization for size,
which doesn't necessarily result in smaller images, but can have
negative impact on performance. Switch back to the less aggressive
-Os.
This reverts commit 6748cb3c29.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.
um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
During a simple no-op (nothing changed) build I saw 39 invocations of
the C compiler with the argument "-print-file-name=include". We don't
need to call the C compiler 39 times for this--one time will suffice.
Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid
this since there doesn't appear to be any reason it should be
recursively expanded.
On my build this shaved ~400 ms off my "no-op" build.
Note that the recursive expansion seems to date back to the (really
old) commit e8f5bdb02c ("[PATCH] Makefile include path ordering").
It's a little unclear to me if the point of that patch was to switch
the variable to be recursively expanded (which it did) or to avoid
directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because
someone else (out of tree?) was setting it. I presume later since if
the only goal was to switch to recursive expansion the patch would
have just removed the ":".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 3812b8c5c5 ("kbuild: make -r/-R effective in top
Makefile for old Make versions"), make-kpkg is not working.
make-kpkg directly includes the top Makefile of Linux kernel, and
appends some debian_* targets.
/usr/share/kernel-package/ruleset/kernel_version.mk:
# Include the kernel makefile
override dot-config := 1
include Makefile
dot-config := 1
I did not know the kernel Makefile was used in that way, and it is
hard to guarantee the behavior when the kernel Makefile is included
by another Makefile from a different project.
It looks like Debian Stretch stopped providing make-kpkg. Maybe it is
obsolete and being replaced with 'make deb-pkg' etc. but still widely
used.
This commit adds a workaround; if the top Makefile is included by
another Makefile, skip sub-make in order to make the main part visible.
'MAKEFLAGS += -rR' does not become effective for GNU Make < 4.0, but
Debian/Ubuntu is already using newer versions.
The effect of this commit:
Debian 8 (Jessie) : Fixed
Debian 9 (Stretch) : make-kpkg (kernel-package) is not provided
Ubuntu 14.04 LTS : NOT Fixed
Ubuntu 16.04 LTS : Fixed
Ubuntu 18.04 LTS : Fixed
This commit cannot fix Ubuntu 14.04 because it installs GNU Make 3.81,
but its support will end in Apr 2019, which is before the Linux v5.1
release.
I added warning so that nobody would try to include the top Makefile.
Fixes: 3812b8c5c5 ("kbuild: make -r/-R effective in top Makefile for old Make versions")
Reported-by: Liz Zhang <lizzha@microsoft.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Lili Deng <v-lide@microsoft.com>
Cc: Manoj Srivastava <srivasta@debian.org>
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module build
- allow to add optional flags to dpkg-buildpackage when building deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y9YG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module
build
- allow to add optional flags to dpkg-buildpackage when building
deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: remove scripts/basic/% build target
kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
kbuild: clean up scripts/gcc-version.sh
kbuild: remove cc-version macro
kbuild: update comment block of scripts/clang-version.sh
kbuild: remove commented-out INITRD_COMPRESS
kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
kbuild: move ".config not found!" message from Kconfig to Makefile
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
kbuild: simplify single target rules
kbuild: remove empty rules for makefiles
kbuild: make -r/-R effective in top Makefile for old Make versions
kbuild: move tools_silent to a more relevant place
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
kbuild: refactor cc-cross-prefix implementation
kbuild: hardcode genksyms path and remove GENKSYMS variable
scripts/gdb: refactor rules for symlink creation
kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
scripts/gdb: do not descend into scripts/gdb from scripts
...
Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
ep8g+6oRLxJy414hogxQ
=bLs2
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
driver core: platform: remove misleading err_alloc label
platform: set of_node in platform_device_register_full()
firmware: hardcode the debug message for -ENOENT
driver core: Add missing description of new struct device_link field
driver core: Fix PM-runtime for links added during consumer probe
drivers/component: kerneldoc polish
async: Add cmdline option to specify drivers to be async probed
driver core: Fix possible supplier PM-usage counter imbalance
PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
driver: platform: Support parsing GpioInt 0 in platform_get_irq()
selftests: firmware: fix verify_reqs() return value
Revert "selftests: firmware: remove use of non-standard diff -Z option"
Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
device: Fix comment for driver_data in struct device
kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
sysfs: remove unused include of kernfs-internal.h
driver core: Postpone DMA tear-down until after devres release
driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
PM-runtime: Take suppliers into account in __pm_runtime_set_status()
device.h: Add __cold to dev_<level> logging functions
...
This build rule was introduced by commit cd05e6bdc6 ("[PATCH]
kbuild: fix split-include dependency") to handle the dependency of
scripts/basic/split-include.
Now, fixdep is the only tool in scripts/basic/, and this rule is
no longer used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The flag '-Werror-implicit-function-declaration', present in GCC 2.95,
stopped to be documented in GCC 4.3, replaced by the more generic
'-Werror=...' form.
So, use the equivalent '-Werror=implicit-function-declaration' instead.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This code has been commented out since commit b7000adef1
("Don't set the INITRD_COMPRESS environment variable automatically").
Clean it up now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CONFIG_DEBUG_INFO_SPLIT and CONFIG_DEBUG_INFO_DWARF4 enable extra
dwarf options if supported. You never know if they are really enabled
since Makefile may silently turn them off.
The actual behavior will match to the kernel configuration by
testing those compiler flags in the Kconfig stage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If you run "make" in a pristine source tree, currently Kbuild will
start to build Kconfig to let it show the error message.
It would be more straightforward to check it in Makefile and let
it fail immediately.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If include/config/auto.conf.cmd is lost for some reasons, it is not
self-healing, so the top Makefile misses to run syncconfig.
Move include/config/auto.conf.cmd to the target side.
I used a pattern rule instead of a normal rule here although it is
a bit gross.
If the rule were written with a normal rule like this,
include/config/auto.conf \
include/config/auto.conf.cmd \
include/config/tristate.conf: $(KCONFIG_CONFIG)
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
... syncconfig would be executed per target.
Using a pattern rule makes sure that syncconfig is executed just once
because Make assumes the recipe will create all of the targets.
Here is a quote from the GNU Make manual [1]:
"Pattern rules may have more than one target. Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe. If a pattern rule has multiple targets, make knows that
the rule's recipe is responsible for making all of the targets. The
recipe is executed only once to make all the targets. When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: make worries only about giving a recipe and prerequisites
to the file presently in question. However, when this file's recipe is
run, the other targets are marked as having been updated themselves."
[1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The dependency will be checked anyway after Kbuild descends into a
sub-directory. Skip object/source dependency checks in top Makefile.
VPATH can be simpler since the top Makefile no longer checks the
presence of the source file, which is located in in the external
module directory.
One good thing is, it can compile an object from a generated source
file.
$ make crypto/rsapubkey.asn1.o
...
ASN.1 crypto/rsapubkey.asn1.c
CC crypto/rsapubkey.asn1.o
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The previous commit made 'MAKEFLAGS += -rR' effective in the top
Makefile regardless of O= option, GNU Make versions.
The top Makefile does not need to cancel implicit rules for makefiles.
There is still one place where an empty rule is useful. Since -rR is
effective only after sub-make, GNU Make would try implicit rules to
update the top Makefile. Although it is not a big overhead, cancel it
just in case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Adding -rR to MAKEFLAGS is important because we do not want to
be bothered by built-in implicit rules or variables.
One problem that used to exist in older GNU Make versions is
MAKEFLAGS += -rR
... does not become effective in the current Makefile. When you are
building with O= option, it becomes effective in the top Makefile
since it recurses via 'sub-make' target. Otherwise, the top Makefile
tries implicit rules. That is why we explicitly add empty rules for
Makefiles, but we often miss to do that.
In fact, adding -d option to older GNU Make versions shows it is
trying a bunch of implicit pattern rules.
Considering target file `scripts/Makefile.kcov'.
Looking for an implicit rule for `scripts/Makefile.kcov'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.o'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.c'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.cc'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.C'.
...
This issue was fixed by GNU Make commit 58dae243526b ("[Savannah #20501]
Handle adding -r/-R to MAKEFLAGS in the makefile"). So, it is no longer
a problem if you use GNU Make 4.0 or later. However, older versions are
still widely used.
So, I decided to patch the kernel Makefile to invoke sub-make regardless
of O= option. This will allow further cleanups.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched
various false positives:
- commit e74fc973b6 ("Turn off -Wmaybe-uninitialized when building
with -Os") turned off this option for -Os.
- commit 815eb71e71 ("Kbuild: disable 'maybe-uninitialized' warning
for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for
CONFIG_PROFILE_ALL_BRANCHES
- commit a76bcf557e ("Kbuild: enable -Wmaybe-uninitialized warning
for "make W=1"") turned off this option for GCC < 4.9
Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903
I think this looks better by shifting the logic from Makefile to Kconfig.
Link: https://github.com/ClangBuiltLinux/linux/issues/350
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
The genksyms source was integrated into the kernel tree in 2003.
I do not expect anybody still using the external /sbin/genksyms.
Kbuild does not need to provide the ability to override GENKSYMS.
Let's remove the GENKSYMS variable, and use the hardcoded path.
Since it occurred in the pre-git era, I attached the commit message
in case somebody is interested in the historical background.
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date: Wed Feb 19 04:17:28 2003 -0600
|
| kbuild: [PATCH] put genksyms in scripts dir
|
| This puts genksyms into scripts/genksyms/.
|
| genksyms used to be maintained externally, though the only possible user
| was the kernel build. Moving it into the kernel sources makes it easier to
| keep it uptodate, like for example updating it to generate linker scripts
| directly instead of postprocessing the generated header file fragments
| with sed, as we do currently.
|
| Also, genksyms does not handle __typeof__, which needs to be fixed since
| some of the exported symbol in the kernel are defined using __typeof__.
|
| (Rusty Russell/me)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is weird to create gdb stuff as a side-effect of vmlinux.
Move it to a more relevant place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Currently, Kbuild descends from scripts/Makefile to scripts/gdb/Makefile
just for creating symbolic links, but it does not need to do it so early.
Merge the two descending paths to simplify the code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
scripts/gdb/linux/constants.py is never used in the kernel build
process. There is no good reason to create it so early.
Get it out of the 'prepare' stage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Commit 06300b21f4 ("kbuild: support building individual files for
external modules") introduced the '/' target. It works only for
external modules to build all .o files, but skip the modpost stage.
However, 'make /' looks a bit weird to me. 'make ./' is more sensible
if you want to build all objects under the current directory, and it
works as expected.
Let's change '/' into a phony target that is an alias of './', but
I may feel like deprecating it in the future.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is fine to set KBUILD_MODULES=1 when CONFIG_MODULES is disabled.
It is actually how "make allnoconfig all" works.
On the other hand, KBUILD_MODULES=1 is unneeded for the %.ko pattern.
It is just a matter of whether modules.order is generated or not.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This causes an issue when trying to build with `make LD=ld.lld` if
ld.lld and the rest of your cross tools aren't in the same directory
(ex. /usr/local/bin) (as is the case for Android's build system), as the
GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point
where LLVM tools are, not GCC/binutils tools are located.
Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by
binutils for which LLVM does not provide a substitute for, such as
elfedit.
Fixes: 785f11aa59 ("kbuild: Add better clang cross build support")
Link: https://github.com/ClangBuiltLinux/linux/issues/341
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When compiling into output directory using O=, many files
created under KBUILD_OUTPUT that git considers
as new ones; git clients, ex. "git gui" lists it, and it clutters
file list making it difficult to see what was really changed
Generate .gitignore in output directory that ignores all
its content
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no build order among the following:
prepare3
outputmakefile
asm-generic
$(version_h)
$(autoksyms_h)
include/generated/utsrelease.h
It is meaningless to insert the prepare2 target between the first
three and the last three.
The comment says, "prepare2 creates a makefile if using a separate
output directory." Let me explain it more precisely. The prepare
targets cannot be executed without the .config file. Because the
configuration targets depend on the outputmakefile target, the
generated makefile is already there before the parepare2 is run.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The top Makefile does not need to export KBUILD_VMLINUX_INIT and
KBUILD_VMLINUX_MAIN separately.
Put every built-in.a into KBUILD_VMLINUX_OBJS. The order of
$(head-y), $(init-y), $(core-y), ... is still retained.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, the 'firmware' directory only contains a single Makefile
to embed extra firmware into the kernel.
Move it to the more relevant place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c3ff2a5193 ("powerpc/32: add stack protector support")
caused kernel panic on PowerPC when an external module is used with
CONFIG_STACKPROTECTOR because the 'prepare' target was not executed
for the external module build.
Commit e07db28eea ("kbuild: fix single target build for external
module") turned it into a build error because the 'prepare' target is
now executed but the 'prepare0' target is missing for the external
module build.
External module on arm/arm64 with CONFIG_STACKPROTECTOR_PER_TASK is
also broken in the same way.
Move 'PHONY += prepare0' to the common place. GNU Make is fine with
missing rule for phony targets. I also removed the comment which is
wrong irrespective of this commit.
I minimize the change so it can be easily backported to 4.20.x
To fix v4.20, please backport e07db28eea ("kbuild: fix single target
build for external module"), and then this commit.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201891
Fixes: e07db28eea ("kbuild: fix single target build for external module")
Fixes: c3ff2a5193 ("powerpc/32: add stack protector support")
Fixes: 189af46571 ("ARM: smp: add support for per-task stack canaries")
Fixes: 0a1213fa74 ("arm64: enable per-task stack canaries")
Cc: linux-stable <stable@vger.kernel.org> # v4.20
Reported-by: Samuel Holland <samuel@sholland.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
