Commit Graph

121393 Commits

Author SHA1 Message Date
Jamie Iles
6b1a98d1c4 tty: serial8250: add helpers for the DesignWare 8250
The Synopsys DesignWare 8250 is an 8250 that has an extra interrupt that
gets raised when writing to the LCR when busy.  To handle this we need
special serial_out, serial_in and handle_irq methods.  Add a new
function serial8250_use_designware_io() that configures a uart_port with
these accessors.

Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:54:19 -07:00
Jamie Iles
4834d02897 tty: serial8250: remove UPIO_DWAPB{,32}
Now that platforms can override the port IRQ handler and the only user
of these UPIO modes has been converted over, kill off UPIO_DWAPB and
UPIO_DWAPB32.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:53:00 -07:00
Jamie Iles
583d28e92f tty: serial8250: allow platforms to override irq handler
Some ports (e.g. Synopsys DesignWare 8250) have special requirements for
handling the interrupts.  Allow these platforms to specify their own
interrupt handler that will override the default.
serial8250_handle_irq() is provided so that platforms can extend the IRQ
handler rather than completely replacing it.

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:52:59 -07:00
Thomas Abraham
88bb4ea14c serial: samsung: Add unified interrupt handler for s3c64xx and later SoC's
s3c64xx and later SoC's include the interrupt mask and pending registers
in the uart controller, unlike the s3c24xx SoC's which have these registers
in the interrupt controller. When the mask and pending registers are part
of the uart controller, a unified interrupt handler can handle the tx/rx
interrupt. With this, the static reservation of interrupt numbers for the
uart tx/rx/err interrupts in the linux irq space is not required and
simplifies adding device tree support.

Suggested-by: Grant Likely <grant.likely@secretlab.ca>
CC: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:48:31 -07:00
Sonic Zhang
47918f0558 serial:bfin_uart: Put TX IRQ in individual platform resource.
Serial TX IRQ is not RX IRQ plus 1 in some blackfin chips.
Give individual platform resources to both TX and RX irqs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:48:31 -07:00
Mathias Krause
502fcb796c tty: clearify structure initializer in notify_write()
Even though this is valid C we should not mix C99 initializers with
obfuscated ANSI C. Stick to C99 and initialize c by its name.

Found by clang:
drivers/tty/vt/vt.c:262:55: warning: explicitly assigning a variable of
type 'unsigned int' to itself [-Wself-assign]
    struct vt_notifier_param param = { .vc = vc, unicode = unicode };
                                                 ~~~~~~~ ^ ~~~~~~~

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:48:30 -07:00
Sonic Zhang
0c6967b5a0 serial:blackfin: rename Blackfin serial driver to bfin_uart.c
bfin_5xx.c is not a general name for all Blackfin chips.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:47:05 -07:00
Sonic Zhang
bb7e58f896 serial:blackfin: Correct coding style in bfin serial driver.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:42:57 -07:00
Jiri Slaby
8bab534b50 TTY: mxser+cyclades remove wait_until_sent debug code
It makes the code really ugly. And since it can be enabled only before
building and only in the source files, it can be barely used by users.
That said, I've not seen anybody to use it in the past few years.

This crap is copied to some more drivers over the tty tree. Since I'm
not their maintainer, I'm not sure if I should remove them too?

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:34:07 -07:00
Jiri Slaby
906cbe1364 TTY: remove tty_locked
We used it really only serial and ami_serial. The rest of the
callsites were BUG/WARN_ONs to check if BTM is held. Now that we
pruned tty_locked from both of the real users, we can get rid of
tty_lock along with __big_tty_mutex_owner.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:34:07 -07:00
Jiri Slaby
eff4b0b9fe TTY: ami_serial, remove BTM from wait_until_sent
The same as in "TTY: serial, remove BTM from wait_until_sent" we don't
need to take BTM in wait_until_sent of ami_serial. Exactly the same
as serial, ami_serial accesses some "info" members (xmit_fifo_size,
timeout), but their assignment on other places in the code is not
protected by BTM anyway.

So the BTM protects nothing here. This removal helps us to get rid of
tty_locked() and __big_tty_mutex_owner in the following patch. This
was suggested by Arnd.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andreas Bombe <aeb@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:34:06 -07:00
Jiri Slaby
6a3e492b6d TTY: serial, remove tasklet for tty_wakeup
tty_wakeup can be called from any context. So there is no need to have
an extra tasklet for calling that. Hence save some space and remove
the tasklet completely.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:34:06 -07:00
Jiri Slaby
e150c4ccbe TTY: msm_serial, remove unneeded console set
It doesn't make sense to set console to uart_port in console->setup.
At that time the console is set by uart_add_one_port already.

The call chain looked like:
uart_add_one_port()
  uport->cons = drv->cons;   <= once
  uart_configure_port()
    register_console()
     console->setup()
       port->cons = co;      <= second time

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:34:05 -07:00
Jiri Slaby
1f33a51d97 TTY: serial, remove BTM from wait_until_sent
During the BKL removal process, the BKL was switched to tty_lock
(BTM). Now we should start pruning the BTM further. Let's start with
wait_until_sent of the serial layer. This will allow us to switch to
the tty port helpers and thus clean it up much.

In wait_until_sent there are some uport members accessed, but neither
of them is protected by BTM at the location they are set ('=>' means
function call):
* uport->fifosize (set in tty_ioctl => uart_ioctl => uart_set_info)
* uport->type (set in add_one_port prior to tty_register_device)
* uport->timeout (set usually in tty_ioctl => tty_mode_ioctl =>
  tty_set_termios => uart_set_termios => uart_change_speed =>
  uport->ops->set_termios => uart_update_timeout)
* call to uport->ops->tx_empty()

If the tx_empty hook needs some lock to protect accesses to registers,
it should take &uport->lock spinlock like 8250 does. Otherwise there
still might be races e.g. with ISRs.

This should also fix the issue Andreas is seeing (BTM in comparison to
BKL doesn't have any hidden functionality like unlocking during
sleeping).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
References: https://lkml.org/lkml/2011/5/25/562
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andreas Bombe <aeb@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:34:05 -07:00
Edwin van Vliet
ae8dbd3eb9 drivers/tty/synclink: remove double comment
Redundant comment line was removed

Signed-off-by: Edwin van Vliet <edwin@cheatah.nl>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:32:56 -07:00
Timur Tabi
dcd83aaff1 tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver
The ePAPR embedded hypervisor specification provides an API for "byte
channels", which are serial-like virtual devices for sending and receiving
streams of bytes.  This driver provides Linux kernel support for byte
channels via three distinct interfaces:

1) An early-console (udbg) driver.  This provides early console output
through a byte channel.  The byte channel handle must be specified in a
Kconfig option.

2) A normal console driver.  Output is sent to the byte channel designated
for stdout in the device tree.  The console driver is for handling kernel
printk calls.

3) A tty driver, which is used to handle user-space input and output.  The
byte channel used for the console is designated as the default tty.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:32:56 -07:00
Linus Torvalds
3210d190dc Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: handle ack_busy when fetching the Config ROM
2011-08-21 18:13:19 -07:00
Randy Dunlap
47c08f3107 pci: fix new kernel-doc warning in pci.c
Fix new kernel-doc warning in pci.c:

  Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps'
  Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-20 18:02:32 -07:00
Linus Torvalds
bed8cad959 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
  drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
2011-08-19 23:07:08 -07:00
Jesse Barnes
b095cd0a0c drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that
MI_FLUSH would flush the TLBs in addition to the rest of the caches
indicated in the MI_FLUSH command.  However starting with Ivybridge, the
register defaults to 0x2800 out of reset, meaning that to invalidate the
TLB we need to use PIPE_CONTROL.  Since we're not doing that yet, go
back to the old default so things work.

v2: don't forget to actually *clear* the new bit

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-19 11:57:12 -07:00
Linus Torvalds
5ccc38740a Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits)
  Revert "cfq: Remove special treatment for metadata rqs."
  block: fix flush machinery for stacking drivers with differring flush flags
  block: improve rq_affinity placement
  blktrace: add FLUSH/FUA support
  Move some REQ flags to the common bio/request area
  allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH
  xen/blkback: Make description more obvious.
  cfq-iosched: Add documentation about idling
  block: Make rq_affinity = 1 work as expected
  block: swim3: fix unterminated of_device_id table
  block/genhd.c: remove useless cast in diskstats_show()
  drivers/cdrom/cdrom.c: relax check on dvd manufacturer value
  drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse
  bsg-lib: add module.h include
  cfq-iosched: Reduce linked group count upon group destruction
  blk-throttle: correctly determine sync bio
  loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other
  loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices
  loop: add management interface for on-demand device allocation
  loop: replace linked list of allocated devices with an idr index
  ...
2011-08-19 10:47:07 -07:00
Linus Torvalds
0c3bef6128 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: OF: Don't crash when bridge parent is NULL.
  PCI: export pcie_bus_configure_settings symbol
  PCI: code and comments cleanup
  PCI: make cardbus-bridge resources optional
  PCI: make SRIOV resources optional
  PCI : ability to relocate assigned pci-resources
  PCI: honor child buses add_size in hot plug configuration
  PCI: Set PCI-E Max Payload Size on fabric
2011-08-19 10:02:37 -07:00
David Daney
69566dd8be PCI: OF: Don't crash when bridge parent is NULL.
In pcibios_get_phb_of_node(), we will crash while booting if
bus->bridge->parent is NULL.

Check for this case and avoid dereferencing the NULL pointer.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-19 08:51:37 -07:00
Linus Torvalds
2c4ac99f98 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  drivers/ata/sata_dwc_460ex.c: add missing kfree
  ata: Add iMX pata support
  pata_via: disable ATAPI DMA on AVERATEC 3200
  [libata] sata_sil: fix used-uninit warning
2011-08-18 22:48:30 -07:00
Julia Lawall
a081da630d drivers/ata/sata_dwc_460ex.c: add missing kfree
Currently, error handling code in this function calls the function
sata_dwc_port_stop, but this function has essentially no effect if hsdevp
has not been stored in ap, which is the case throughout this function.  The
only effect is to print a debugging message including ap->print_id.

The code is rewritten to not call sata_dwc_port_stop, but instead to jump
to a local label that prints the original error message and the print_id
information.  In the case where hsdevp has been already allocated (but not
yet stored in ap), this value is freed as well.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@exists@
local idexpression x;
statement S,S1;
expression E;
identifier fl;
expression *ptr != NULL;
@@

x = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...kfree(x)...+> }
     when any
     when != true x == NULL
x->fl
...>
(
if (x == NULL) S1
|
if (...) { ... when != x
               when forall
(
 return \(0\|<+...x...+>\|ptr\);
|
* return ...;
)
}
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18 23:58:11 -04:00
Arnaud Patard (Rtp)
e39c75cf3e ata: Add iMX pata support
Add basic support for pata on iMX. It has been tested only on imx51.
SDMA support will probably be added later so this version supports only
PIO.

v2:
  - enable only when needed IORDY
  - use dev_get_drvdata
v3:
  - add missing clk_put() calls
  - use platform_get_irq()
  - fix resume code to avoid disabling IORDY on resume
v4:
  - Remove EXPERIMENTAL and switch to depends on ARCH_MXC
  - Use devm_kzalloc()
  - make clock a must-have
  - Use only 1 ioremap

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18 23:57:58 -04:00
Tejun Heo
6d0e194d2e pata_via: disable ATAPI DMA on AVERATEC 3200
On AVERATEC 3200, pata_via causes memory corruption with ATAPI DMA,
which often leads to random kernel oops.  The cause of the problem is
not well understood yet and only small subset of machines using the
controller seem affected.  Blacklist ATAPI DMA on the machine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=11426
Reported-and-tested-by: Jim Bray <jimsantelmo@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18 23:56:39 -04:00
Jeff Garzik
ebd1699ec5 [libata] sata_sil: fix used-uninit warning
Init 'serror' to silence the following warning:

drivers/ata/sata_sil.c: In function ‘sil_interrupt’:
drivers/ata/sata_sil.c:453:14: warning: ‘serror’ may be used uninitialized in
this function [-Wuninitialized]

This is not a 'can never happen' but is nonetheless extremely unlikely.
The easiest and cleanest warning fix is simply to init the var,
rather than worry about marking the var uninit-ok.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18 23:52:36 -04:00
Linus Torvalds
fbad8991ef Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/iser: Support iSCSI PDU padding
  IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long)
  IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
2011-08-18 14:18:55 -07:00
Mathias Krause
8cf2d2399a i7core_edac: fixed typo in error count calculation
Based on a patch from the PaX Team, found during a clang analysis pass.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: stable@kernel.org [v2.6.35+]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-18 14:07:15 -07:00
Linus Torvalds
b4fd4ae6c6 Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Domains: Fix build for CONFIG_PM_RUNTIME unset
2011-08-17 13:15:25 -07:00
Roland Dreier
80b43de837 Merge branches 'ipoib' and 'iser' into for-next 2011-08-17 10:57:43 -07:00
Linus Torvalds
6cac952960 Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rtc: Limit RTC PIE frequency
  rtc: Fix hrtimer deadlock
  rtc: Handle errors correctly in rtc_irq_set_state()

Fixup trivial conflicts in drivers/rtc/interface.c due to slightly
trivially versions of the same patch coming in two different ways.
2011-08-17 10:28:33 -07:00
Or Gerlitz
200ae1a08b IB/iser: Support iSCSI PDU padding
RFC3270 mandates that iSCSI PDUs are padded to the closest integer
number of four byte words.  Fix the iser code to support that on both
the TX/RX flows.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-08-17 09:45:07 -07:00
Or Gerlitz
0ace64b85e IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long)
The code that prepares the SG associated with SCSI command for FMR was
buggy for systems with DMA addresses that don't fit in unsigned long,
e.g under the 32-bit based XenServer dom0 sizeof(dma_addr_t) is 8.

Fix that by casting to unsigned long long a masking constant used by
the code. This resolves a crash in iser_sg_to_page_vec on this system.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-08-17 09:40:55 -07:00
Bernd Schubert
22cfb0bf67 IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
Fix a bug introduced in 69cce1d140 ("net: Abstract dst->neighbour
accesses behind helpers.") where we might dereference skb_dst(skb)
even if it is NULL, which causes:

    [  240.944030] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
    [  240.948007] IP: [<ffffffffa0366ce9>] ipoib_start_xmit+0x39/0x280 [ib_ipoib]
    [...]
    [  240.948007] Call Trace:
    [  240.948007]  <IRQ>
    [  240.948007]  [<ffffffff812cd5e0>] dev_hard_start_xmit+0x2a0/0x590
    [  240.948007]  [<ffffffff8131f680>] ? arp_create+0x70/0x200
    [  240.948007]  [<ffffffff812e8e1f>] sch_direct_xmit+0xef/0x1c0

Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=41212
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-08-16 10:19:20 -07:00
Randy Dunlap
4fec0e0bde xen: self-balloon needs module.h
Fix build errors (found when CONFIG_SYSFS is not enabled):

  drivers/xen/xen-selfballoon.c:446: warning: data definition has no type or storage class
  drivers/xen/xen-selfballoon.c:446: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
  drivers/xen/xen-selfballoon.c:446: warning: parameter names (without types) in function declaration
  drivers/xen/xen-selfballoon.c:485: error: expected declaration specifiers or '...' before string constant
  drivers/xen/xen-selfballoon.c:485: warning: data definition has no type or storage class
  drivers/xen/xen-selfballoon.c:485: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
  drivers/xen/xen-selfballoon.c:485: warning: function declaration isn't a prototype

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-16 07:23:34 -07:00
Alan Cox
c3585aa91a gma500: kill MIPI interface types
Kirill Shutemov found problems with the non-upstream IMG driver where the
use of extra DRM encoder/connector types caused random crashes when the DRM
layer tried to display their matching name. This removes the MIPI types
matching the changes Pauli Nieminen made to the non upstream driver set.

As Pauli points out:
" MIPI (or DSI) is protocol specification on top of LVDS serial bus. That
 makes it resonable to call MIPI connectors and encoders LVDS."

(and indeed they may also be HDMI convertors or similar when we want to
 report a more useful to end user result)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-16 07:22:16 -07:00
Stephen Rothwell
b5ddbf465f regmap: using module facilities requires module.h
Commit b33f9cbd67 ("regmap: Specify a module license") added a
MODULES_LICENSE to this file without adding an include of module.h.

module.h should have been included anyway, since this file has
EXPORT_SYMBOLs as well.  With the pending module.h split up, this would
probably have caused build problems.

Cc: Stephen Warren <swarren@nvidia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-15 19:28:17 -07:00
Linus Torvalds
291b63c86a Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915: Cannot set clock gating under UMS
  drm/i915: Can't do accurate vblank timestamps with UMS
  Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
  drm/i915: split out PCH refclk update code
  drm/i915: show interrupt info on IVB
  drm/i915: Remove unused 'reg' argument to dp_pipe_enabled
  drm/i915: Fix PCH port pipe select in CPT disable paths
  drm/i915: Leave LVDS registers unlocked
  drm/i915: Wait for LVDS panel power sequence
2011-08-15 19:14:18 -07:00
Keith Packard
92b79f4322 drm/i915: Cannot set clock gating under UMS
The clock gating functions are only assigned under KMS, so don't try
to call them under UMS.

Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
2011-08-15 12:10:27 -07:00
Keith Packard
c3613de92e drm/i915: Can't do accurate vblank timestamps with UMS
Disable this feature when KMS is not running by setting the
driver->get_vblank_timestamp function pointer to NULL.

Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
2011-08-15 12:10:26 -07:00
Matthew Garrett
aaa6fd2a00 Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Sedat Dilek <sedat.dilek@googlemail.com>
Tested-by: Michel Alexandre Salim <salimma@fedoraproject.org>
Tested-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-15 12:10:25 -07:00
Linus Torvalds
6f02bfc404 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: fix DMA unmapping in an error path
  firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner cases
2011-08-15 08:40:49 -07:00
Linus Torvalds
4cb5aa1d01 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: don't try to be smart in the hpd handler
  drm/radeon: re-POST the asic on Apple hardware when booted via EFI
  drm/radeon: Allow panel preferred EDID to override BIOS native mode
  drm/radeon/kms: make some watermark messages debug only
  drm/radeon/kms: fix regression is handling >2 heads on cedar/caicos
  drm/radeon/kms: don't enable connectors that are off in the hotplug handler
2011-08-15 08:39:10 -07:00
Linus Torvalds
259a53407d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Specify a module license
  regmap: Fix bulk reads
2011-08-15 08:35:54 -07:00
Alex Deucher
d5811e8731 drm/radeon/kms: don't try to be smart in the hpd handler
Attempting to try and turn off disconnected display hw in the
hotput handler lead to more problems than it helped.  For
now just register an event and only attempt the do something
interesting with DP.  Other connectors are just too problematic:
- Some systems have an HPD pin assigned to LVDS, but it's rarely
if ever connected properly and we don't really care about hpd
events on LVDS anyway since it's always connected.
- The HPD pin is wired up correctly for eDP, but we don't really
have to do anything since the events since it's always connected.
- Some HPD pins fire more than once when you connect/disconnect
- etc.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=39882

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-15 09:44:12 +01:00
Linus Torvalds
97c24d1d45 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: remove unused "ddr" parameter in struct mmc_ios
  mmc: dw_mmc: Fix DDR mode support.
  mmc: core: use defined R1_STATE_PRG macro for card status
  mmc: sdhci: use f_max instead of host->clock for timeouts
  mmc: sdhci: move timeout_clk calculation farther down
  mmc: sdhci: check host->clock before using it as a denominator
  mmc: Revert "mmc: sdhci: Fix SDHCI_QUIRK_TIMEOUT_USES_SDCLK"
  mmc: tmio: eliminate unused variable 'mmc' warning
  mmc: esdhc-imx: fix card interrupt loss on freescale eSDHC
  mmc: sdhci-s3c: Fix build for header change
  mmc: dw_mmc: Fix mask in IDMAC_SET_BUFFER1_SIZE macro
  mmc: cb710: fix possible pci_dev leak in cb710_pci_configure()
  mmc: core: Detect eMMC v4.5 ext_csd entries
  mmc: mmc_test: avoid stalled file in debugfs
  mmc: sdhci-s3c: add BROKEN_ADMA_ZEROLEN_DESC quirk
  mmc: sdhci: pxav3: controller needs 32 bit ADMA addressing
  mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finish
2011-08-14 12:28:15 -07:00
Rafael J. Wysocki
17f2ae7f67 PM / Domains: Fix build for CONFIG_PM_RUNTIME unset
Function genpd_queue_power_off_work() is not defined for
CONFIG_PM_RUNTIME, so pm_genpd_poweroff_unused() causes a build
error to happen in that case.  Fix the problem by making
pm_genpd_poweroff_unused() depend on CONFIG_PM_RUNTIME too.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-14 13:34:31 +02:00
Linus Torvalds
91d85ea678 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (ibmaem) add missing kfree
  hwmon: (pmbus/lm25066) Ignore byte writes to non-zero pages
  hwmon: (pmbus) Virtualize pmbus_write_byte
2011-08-13 18:37:28 -07:00