Commit Graph

17 Commits

Author SHA1 Message Date
Andrew Donnellan
bdd910017c powerpc/configs: Remove old symbols from defconfigs
Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-08 22:10:07 +10:00
Michael Ellerman
a85cade676 powerpc: Update all configs using savedefconfig
It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 18:06:58 +11:00
송은봉
847443774b powerpc: : Kill CONFIG_MTD_PARTITIONS
This patch removes CONFIG_MTD_PARTITIONS in config files for powerpc.
 Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b.

Signed-off-by: Eunbong Song <eunb.song@samsung.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07 15:50:11 +11:00
Linus Torvalds
1197ab2942 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-06 17:12:03 -08:00
Tony Breeds
3b3bceef26 net: fix IBM EMAC driver after rename.
In commit 9aa3283595 (ehea/ibm*: Move the
IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC*

The conversion was incomplete so that even if the driver was added to
the .config it wasn't built, but there were no errors).  In this commit
we also update the various defconfigs that use EMAC to use the new
Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard.

We do not explicitly select the Kconfig dependencies, as this would force
EMAC on.  Doing it in the defconfig allows more flexibility.

Tested on a canyondlands board.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18 21:33:49 -07:00
Josh Boyer
9fcd768d0c powerpc/40x: Remove obsolete HCU4 board
The HCU4 board is unmaintained.  Remove it.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11 13:56:43 -04:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Benjamin Herrenschmidt
61a3e1665f powerpc: Trim defconfigs
This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09 11:19:16 +10:00
Grant Likely
65cf840ff4 powerpc: Disable CONFIG_SYSFS_DEPRECATED
Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not
be required for any distro in the last 3 or 4 years, so disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15 15:02:33 +10:00
Josh Boyer
02ea22896a powerpc/40x: Update the PowerPC 40x board defconfigs
Update the 40x defconfigs for 2.6.33

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-01-04 10:59:32 -05:00
Benjamin Herrenschmidt
6469c92e0a Merge commit 'jwb/jwb-merge' into merge
Manual merge of:
	arch/powerpc/configs/44x/warp_defconfig
2009-01-28 17:15:34 +11:00
Jean Delvare
dd7f8dbe2b eeprom: More consistent symbol names
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 21:19:57 +01:00
Josh Boyer
0b21bcd5b5 powerpc/4xx: Update multi-board PowerPC 4xx defconfigs
Update the multi-board configs for 2.6.29-rc2

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-23 08:58:31 -05:00
Grant Likely
c8d698849e powerpc/virtex: Update defconfigs
Update defconfigs for running on Xilinx Virtex platforms

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-11-14 11:10:55 -07:00
Josh Boyer
c4cd9ec48a powerpc/40x: Update 40x defconfigs
Update the PowerPC 40x defconfigs for 2.6.28

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-30 18:16:14 -04:00
Josh Boyer
9ea7d5ad84 powerpc/4xx: Update defconfig files for 2.6.27-rc1
Update the defconfig files for 4xx boards.  This also makes the mutli-board
defconfigs a bit more useful by enabling some of the more common modules.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-06 07:55:37 -04:00
Josh Boyer
478d5dcb62 [POWERPC] 4xx: Add ppc40x_defconfig
Add a multi-board PowerPC 40x defconfig file

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-16 07:31:57 -05:00