A client can append random data to the end of an NFSv2 or NFSv3 RPC call
without our complaining; we'll just stop parsing at the end of the
expected data and ignore the rest.
Encoded arguments and replies are stored together in an array of pages,
and if a call is too large it could leave inadequate space for the
reply. This is normally OK because NFS RPC's typically have either
short arguments and long replies (like READ) or long arguments and short
replies (like WRITE). But a client that sends an incorrectly long reply
can violate those assumptions. This was observed to cause crashes.
So, insist that the argument not be any longer than we expect.
Also, several operations increment rq_next_page in the decode routine
before checking the argument size, which can leave rq_next_page pointing
well past the end of the page array, causing trouble later in
svc_free_pages.
As followup we may also want to rewrite the encoding routines to check
more carefully that they aren't running off the end of the page array.
Reported-by: Tuomas Haanpää <thaan@synopsys.com>
Reported-by: Ari Kauppi <ari@synopsys.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4 requires a transport "that is specified to avoid network
congestion" (RFC 7530, section 3.1, paragraph 2). In practical terms,
that means that you should not run NFSv4 over UDP. The server has never
enforced that requirement, however.
This patchset fixes this by adding a new flag to the svc_version that
states that it has these transport requirements. With that, we can check
that the transport has XPT_CONG_CTRL set before processing an RPC. If it
doesn't we reject it with RPC_PROG_MISMATCH.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's just simpler to read this way, IMO. Also, no need to explicitly
set vs_hidden to false in the nfsacl ones.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow the user to limit the number of requests serviced through a single
connection, to help prevent faster clients from starving slower clients.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In later patches, we'll want to be able to allocate and free svc_rqst
structures without monkeying with the serv->sv_nrthreads refcount.
Factor those pieces out of their respective functions.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches, we're going to need to allow code external to svc.c
to figure out what pool_mode is in use. Move these definitions into
svc.h to prepare for that.
Also, make the svc_pool_map object available and exported so that other
modules can peek in there to get insight into what pool mode is in use.
Likewise, export svc_pool_map_get/put function to make it safe to do so.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add an operation that will do setup of the service. In the case of a
classic thread-based service that means starting up threads. In the case
of a workqueue-based service, the setup will do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirliey.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For now, all services use svc_xprt_do_enqueue, but once we add
workqueue-based service support, we'll need to do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...not technically an operation, but it's more convenient and cleaner
to pass the module pointer in this struct.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we now have a container for holding svc_serv operations, move the
sv_function into it as well.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches we'll need to abstract out more operations on a
per-service level, besides sv_shutdown and sv_function.
Declare a new svc_serv_ops struct to hold these operations, and move
sv_shutdown into this struct.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The BKL is completely out of the picture in the lockd and sunrpc code
these days. Update the antiquated comments that refer to it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Testing has shown that the pool->sp_lock can be a bottleneck on a busy
server. Every time data is received on a socket, the server must take
that lock in order to dequeue a thread from the sp_threads list.
Address this problem by eliminating the sp_threads list (which contains
threads that are currently idle) and replacing it with a RQ_BUSY flag in
svc_rqst. This allows us to walk the sp_all_threads list under the
rcu_read_lock and find a suitable thread for the xprt by doing a
test_and_set_bit.
Note that we do still have a potential atomicity problem however with
this approach. We don't want svc_xprt_do_enqueue to set the
rqst->rq_xprt pointer unless a test_and_set_bit of RQ_BUSY returned
zero (which indicates that the thread was idle). But, by the time we
check that, the bit could be flipped by a waking thread.
To address this, we acquire a new per-rqst spinlock (rq_lock) and take
that before doing the test_and_set_bit. If that returns false, then we
can set rq_xprt and drop the spinlock. Then, when the thread wakes up,
it must set the bit under the same spinlock and can trust that if it was
already set then the rq_xprt is also properly set.
With this scheme, the case where we have an idle thread no longer needs
to take the highly contended pool->sp_lock at all, and that removes the
bottleneck.
That still leaves one issue: What of the case where we walk the whole
sp_all_threads list and don't find an idle thread? Because the search is
lockess, it's possible for the queueing to race with a thread that is
going to sleep. To address that, we queue the xprt and then search again.
If we find an idle thread at that point, we can't attach the xprt to it
directly since that might race with a different thread waking up and
finding it. All we can do is wake the idle thread back up and let it
attempt to find the now-queued xprt.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll be removing some spinlocking around the socket
and thread queueing code in order to fix some contention problems. At
that point, the stats counters will no longer be protected by the
sp_lock.
Change the counters to atomic_long_t fields, except for the
"sockets_queued" counter which will still be manipulated under a
spinlock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...also make the manipulation of sp_all_threads list use RCU-friendly
functions.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll want to be able to handle this flag without
holding the sp_lock. Change this field to an unsigned long flags
field, and declare a new flag in it that can be managed with atomic
bitops.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are a couple of holes in the svc_rqst field on x86_64. Move the
rq_cachetype to a different location to eliminate both of them.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're always _only_ waking up tasks from within the sp_threads list, so
we know that they are enqueued and alive. The rq_wait waitqueue is just
a distraction with extra atomic semantics.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
rq_usedeferral and rq_splice_ok are used as 0 and 1, just defined to bool.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPC_MAX_AUTH_SIZE is scattered around several places. Better to set it
once in the auth code, where this kind of estimate should be made. And
while we're at it we can leave it zero when we're not using krb5i or
krb5p.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After this we can handle for example getattr of very large ACLs.
Read, readdir, readlink are still special cases with their own limits.
Also we can't handle a new operation starting close to the end of a
page.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If an incoming NFS request is coming from the local host, then
nfsd will need to perform some special handling. So detect that
possibility and make the source visible in rq_local.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4 clients can contact port 2049 directly instead of needing the
portmapper.
Therefore a failure to register to the portmapper when starting an
NFSv4-only server isn't really a problem.
But Gareth Williams reports that an attempt to start an NFSv4-only
server without starting portmap fails:
#rpc.nfsd -N 2 -N 3
rpc.nfsd: writing fd to kernel failed: errno 111 (Connection refused)
rpc.nfsd: unable to set any sockets for nfsd
Add a flag to svc_version to tell the rpc layer it can safely ignore an
rpcbind failure in the NFSv4-only case.
Reported-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I forgot to remove this in
afc59400d6 "nfsd4: cleanup: replace
rq_resused count by rq_next_page pointer".
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There is a race in enqueueing thread to a pool and
waking up a thread.
lockd doesn't wake up on reception of lock granted callback
if svc_wake_up() is called before lockd's thread is added
to a pool.
Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a cleanup patch - makes code looks simplier.
It replaces widely used rqstp->rq_xprt->xpt_net by introduced SVC_NET(rqstp).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the rq_flavor into struct svc_cred, and use it in setclientid and
exchange_id comparisons as well.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This new routine is responsible for service registration in a specified
network context.
The idea is to separate service creation from per-net operations.
Note also: since registering service with svc_bind() can fail, the
service will be destroyed and during destruction it will try to
unregister itself from rpcbind. In this case unregistration has to be
skipped.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch introduces per-net Lockd initialization and destruction routines.
The logic is the same as in global Lockd up and down routines. Probably the
solution is not the best one. But at least it looks clear.
So per-net "up" routine are called only in case of lockd is running already. If
per-net resources are not allocated yet, then service is being registered with
local portmapper and lockd sockets created.
Per-net "down" routine is called on every lockd_down() call in case of global
users counter is not zero.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
On service shutdown we can be sure, that no more users of it left except
current. Thus it looks like using current network namespace context is safe in
this case.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Lockd and NFSd services will handle requests from and to many network
nsamespaces. And thus have to be registered and unregistered per network
namespace.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We have to call svc_rpcb_cleanup() explicitly from nfsd_last_thread() since
this function is registered as service shutdown callback and thus nobody else
will done it for us.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For IPv6 local address, lockd can not callback to client for
missing scope id when binding address at inet6_bind:
324 if (addr_type & IPV6_ADDR_LINKLOCAL) {
325 if (addr_len >= sizeof(struct sockaddr_in6) &&
326 addr->sin6_scope_id) {
327 /* Override any existing binding, if another one
328 * is supplied by user.
329 */
330 sk->sk_bound_dev_if = addr->sin6_scope_id;
331 }
332
333 /* Binding to link-local address requires an interface */
334 if (!sk->sk_bound_dev_if) {
335 err = -EINVAL;
336 goto out_unlock;
337 }
Replacing svc_addr_u by sockaddr_storage, let rqstp->rq_daddr contains more info
besides address.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use NUMA aware allocations to reduce latencies and increase throughput.
sunrpc kthreads can use kthread_create_on_node() if pool_mode is
"percpu" or "pernode", and svc_prepare_thread()/svc_init_buffer() can
also take into account NUMA node affinity for memory allocations.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: "J. Bruce Fields" <bfields@fieldses.org>
CC: Neil Brown <neilb@suse.de>
CC: David Miller <davem@davemloft.net>
Reviewed-by: Greg Banks <gnb@fastmail.fm>
[bfields@redhat.com: fix up caller nfs41_callback_up]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* 'nfs-for-3.1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (44 commits)
NFSv4: Don't use the delegation->inode in nfs_mark_return_delegation()
nfs: don't use d_move in nfs_async_rename_done
RDMA: Increasing RPCRDMA_MAX_DATA_SEGS
SUNRPC: Replace xprt->resend and xprt->sending with a priority queue
SUNRPC: Allow caller of rpc_sleep_on() to select priority levels
SUNRPC: Support dynamic slot allocation for TCP connections
SUNRPC: Clean up the slot table allocation
SUNRPC: Initalise the struct xprt upon allocation
SUNRPC: Ensure that we grab the XPRT_LOCK before calling xprt_alloc_slot
pnfs: simplify pnfs files module autoloading
nfs: document nfsv4 sillyrename issues
NFS: Convert nfs4_set_ds_client to EXPORT_SYMBOL_GPL
SUNRPC: Convert the backchannel exports to EXPORT_SYMBOL_GPL
SUNRPC: sunrpc should not explicitly depend on NFS config options
NFS: Clean up - simplify the switch to read/write-through-MDS
NFS: Move the pnfs write code into pnfs.c
NFS: Move the pnfs read code into pnfs.c
NFS: Allow the nfs_pageio_descriptor to signal that a re-coalesce is needed
NFS: Use the nfs_pageio_descriptor->pg_bsize in the read/write request
NFS: Cache rpc_ops in struct nfs_pageio_descriptor
...
It's sort of ridiculous that we've never had a working reply cache for
NFSv4.
On the other hand, we may still not: our current reply cache is likely
not very good, especially in the TCP case (which is the only case that
matters for v4). What we really need here is some serious testing.
Anyway, here's a start.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change explicit references to CONFIG_NFS_V4_1 to implicit ones
Get rid of the unnecessary defines in backchannel_rqst.c and
bc_svc.c: the Makefile takes care of those dependency.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: (62 commits)
nfsd4: fix callback restarting
nfsd: break lease on unlink, link, and rename
nfsd4: break lease on nfsd setattr
nfsd: don't support msnfs export option
nfsd4: initialize cb_per_client
nfsd4: allow restarting callbacks
nfsd4: simplify nfsd4_cb_prepare
nfsd4: give out delegations more quickly in 4.1 case
nfsd4: add helper function to run callbacks
nfsd4: make sure sequence flags are set after destroy_session
nfsd4: re-probe callback on connection loss
nfsd4: set sequence flag when backchannel is down
nfsd4: keep finer-grained callback status
rpc: allow xprt_class->setup to return a preexisting xprt
rpc: keep backchannel xprt as long as server connection
rpc: move sk_bc_xprt to svc_xprt
nfsd4: allow backchannel recovery
nfsd4: support BIND_CONN_TO_SESSION
nfsd4: modify session list under cl_lock
Documentation: fl_mylease no longer exists
...
Fix up conflicts in fs/nfsd/vfs.c with the vfs-scale work. The
vfs-scale work touched some msnfs cases, and this merge removes support
for that entirely, so the conflict was trivial to resolve.
Differentiate from server backchannel
Signed-off-by: Andy Adamson <andros@netapp.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently we use -EAGAIN returns to determine when to drop a deferred
request. On its own, that is error-prone, as it makes us treat -EAGAIN
returns from other functions specially to prevent inadvertent dropping.
So, use a flag on the request instead.
Returning an error on request deferral is still required, to prevent
further processing, but we no longer need worry that an error return on
its own could result in a drop.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
