Test bpf_sk_lookup_tcp, bpf_sk_release, bpf_sk_cgroup_id and
bpf_sk_ancestor_cgroup_id helpers from cgroup skb program.
The test creates a testing cgroup, starts a TCPv6 server inside the
cgroup and creates two client sockets: one inside testing cgroup and one
outside.
Then it attaches cgroup skb program to the cgroup that checks all TCP
segments coming to the server and allows only those coming from the
cgroup of the server. If a segment comes from a peer outside of the
cgroup, it'll be dropped.
Finally the test checks that client from inside testing cgroup can
successfully connect to the server, but client outside the cgroup fails
to connect by timeout.
The main goal of the test is to check newly introduced
bpf_sk_{,ancestor_}cgroup_id helpers.
It also checks a couple of socket lookup helpers (tcp & release), but
lookup helpers were introduced much earlier and covered by other tests.
Here it's mostly checked that they can be called from cgroup skb.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/171f4c5d75e8ff4fe1c4e8c1c12288b5240a4549.1589486450.git.rdna@fb.com
Add two new network helpers.
connect_fd_to_fd connects an already created client socket fd to address
of server fd. Sometimes it's useful to separate client socket creation
and connecting this socket to a server, e.g. if client socket has to be
created in a cgroup different from that of server cgroup.
Additionally connect_to_fd is now implemented using connect_fd_to_fd,
both helpers don't treat EINPROGRESS as an error and let caller decide
how to proceed with it.
connect_wait is a helper to work with non-blocking client sockets so
that if connect_to_fd or connect_fd_to_fd returned -1 with errno ==
EINPROGRESS, caller can wait for connect to finish or for connection
timeout. The helper returns -1 on error, 0 on timeout (1sec,
hard-coded), and positive number on success.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1403fab72300f379ca97ead4820ae43eac4414ef.1589486450.git.rdna@fb.com
Commit 6879c042e1 ("tools/bpf: selftests: Add bpf_iter selftests")
added self tests for bpf_iter feature. But two subtests
ipv6_route and netlink needs llvm latest 10.x release branch
or trunk due to a bug in llvm BPF backend. This patch added
the file README.rst to document these two failures
so people using llvm 10.0.0 can be aware of them.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200513180215.2949237-1-yhs@fb.com
It is sometimes desirable to be able to trigger BPF program from user-space
with minimal overhead. sys_enter would seem to be a good candidate, yet in
a lot of cases there will be a lot of noise from syscalls triggered by other
processes on the system. So while searching for low-overhead alternative, I've
stumbled upon getpgid() syscall, which seems to be specific enough to not
suffer from accidental syscall by other apps.
This set of benchmarks compares tp, raw_tp w/ filtering by syscall ID, kprobe,
fentry and fmod_ret with returning error (so that syscall would not be
executed), to determine the lowest-overhead way. Here are results on my
machine (using benchs/run_bench_trigger.sh script):
base : 9.200 ± 0.319M/s
tp : 6.690 ± 0.125M/s
rawtp : 8.571 ± 0.214M/s
kprobe : 6.431 ± 0.048M/s
fentry : 8.955 ± 0.241M/s
fmodret : 8.903 ± 0.135M/s
So it seems like fmodret doesn't give much benefit for such lightweight
syscall. Raw tracepoint is pretty decent despite additional filtering logic,
but it will be called for any other syscall in the system, which rules it out.
Fentry, though, seems to be adding the least amoung of overhead and achieves
97.3% of performance of baseline no-BPF-attached syscall.
Using getpgid() seems to be preferable to set_task_comm() approach from
test_overhead, as it's about 2.35x faster in a baseline performance.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-5-andriin@fb.com
Add fmod_ret BPF program to existing test_overhead selftest. Also re-implement
user-space benchmarking part into benchmark runner to compare results. Results
with ./bench are consistently somewhat lower than test_overhead's, but relative
performance of various types of BPF programs stay consisten (e.g., kretprobe is
noticeably slower). This slowdown seems to be coming from the fact that
test_overhead is single-threaded, while benchmark always spins off at least
one thread for producer. This has been confirmed by hacking multi-threaded
test_overhead variant and also single-threaded bench variant. Resutls are
below. run_bench_rename.sh script from benchs/ subdirectory was used to
produce results for ./bench.
Single-threaded implementations
===============================
/* bench: single-threaded, atomics */
base : 4.622 ± 0.049M/s
kprobe : 3.673 ± 0.052M/s
kretprobe : 2.625 ± 0.052M/s
rawtp : 4.369 ± 0.089M/s
fentry : 4.201 ± 0.558M/s
fexit : 4.309 ± 0.148M/s
fmodret : 4.314 ± 0.203M/s
/* selftest: single-threaded, no atomics */
task_rename base 4555K events per sec
task_rename kprobe 3643K events per sec
task_rename kretprobe 2506K events per sec
task_rename raw_tp 4303K events per sec
task_rename fentry 4307K events per sec
task_rename fexit 4010K events per sec
task_rename fmod_ret 3984K events per sec
Multi-threaded implementations
==============================
/* bench: multi-threaded w/ atomics */
base : 3.910 ± 0.023M/s
kprobe : 3.048 ± 0.037M/s
kretprobe : 2.300 ± 0.015M/s
rawtp : 3.687 ± 0.034M/s
fentry : 3.740 ± 0.087M/s
fexit : 3.510 ± 0.009M/s
fmodret : 3.485 ± 0.050M/s
/* selftest: multi-threaded w/ atomics */
task_rename base 3872K events per sec
task_rename kprobe 3068K events per sec
task_rename kretprobe 2350K events per sec
task_rename raw_tp 3731K events per sec
task_rename fentry 3639K events per sec
task_rename fexit 3558K events per sec
task_rename fmod_ret 3511K events per sec
/* selftest: multi-threaded, no atomics */
task_rename base 3945K events per sec
task_rename kprobe 3298K events per sec
task_rename kretprobe 2451K events per sec
task_rename raw_tp 3718K events per sec
task_rename fentry 3782K events per sec
task_rename fexit 3543K events per sec
task_rename fmod_ret 3526K events per sec
Note that the fact that ./bench benchmark always uses atomic increments for
counting, while test_overhead doesn't, doesn't influence test results all that
much.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-4-andriin@fb.com
While working on BPF ringbuf implementation, testing, and benchmarking, I've
developed a pretty generic and modular benchmark runner, which seems to be
generically useful, as I've already used it for one more purpose (testing
fastest way to trigger BPF program, to minimize overhead of in-kernel code).
This patch adds generic part of benchmark runner and sets up Makefile for
extending it with more sets of benchmarks.
Benchmarker itself operates by spinning up specified number of producer and
consumer threads, setting up interval timer sending SIGALARM signal to
application once a second. Every second, current snapshot with hits/drops
counters are collected and stored in an array. Drops are useful for
producer/consumer benchmarks in which producer might overwhelm consumers.
Once test finishes after given amount of warm-up and testing seconds, mean and
stddev are calculated (ignoring warm-up results) and is printed out to stdout.
This setup seems to give consistent and accurate results.
To validate behavior, I added two atomic counting tests: global and local.
For global one, all the producer threads are atomically incrementing same
counter as fast as possible. This, of course, leads to huge drop of
performance once there is more than one producer thread due to CPUs fighting
for the same memory location.
Local counting, on the other hand, maintains one counter per each producer
thread, incremented independently. Once per second, all counters are read and
added together to form final "counting throughput" measurement. As expected,
such setup demonstrates linear scalability with number of producers (as long
as there are enough physical CPU cores, of course). See example output below.
Also, this setup can nicely demonstrate disastrous effects of false sharing,
if care is not taken to take those per-producer counters apart into
independent cache lines.
Demo output shows global counter first with 1 producer, then with 4. Both
total and per-producer performance significantly drop. The last run is local
counter with 4 producers, demonstrating near-perfect scalability.
$ ./bench -a -w1 -d2 -p1 count-global
Setting up benchmark 'count-global'...
Benchmark 'count-global' started.
Iter 0 ( 24.822us): hits 148.179M/s (148.179M/prod), drops 0.000M/s
Iter 1 ( 37.939us): hits 149.308M/s (149.308M/prod), drops 0.000M/s
Iter 2 (-10.774us): hits 150.717M/s (150.717M/prod), drops 0.000M/s
Iter 3 ( 3.807us): hits 151.435M/s (151.435M/prod), drops 0.000M/s
Summary: hits 150.488 ± 1.079M/s (150.488M/prod), drops 0.000 ± 0.000M/s
$ ./bench -a -w1 -d2 -p4 count-global
Setting up benchmark 'count-global'...
Benchmark 'count-global' started.
Iter 0 ( 60.659us): hits 53.910M/s ( 13.477M/prod), drops 0.000M/s
Iter 1 (-17.658us): hits 53.722M/s ( 13.431M/prod), drops 0.000M/s
Iter 2 ( 5.865us): hits 53.495M/s ( 13.374M/prod), drops 0.000M/s
Iter 3 ( 0.104us): hits 53.606M/s ( 13.402M/prod), drops 0.000M/s
Summary: hits 53.608 ± 0.113M/s ( 13.402M/prod), drops 0.000 ± 0.000M/s
$ ./bench -a -w1 -d2 -p4 count-local
Setting up benchmark 'count-local'...
Benchmark 'count-local' started.
Iter 0 ( 23.388us): hits 640.450M/s (160.113M/prod), drops 0.000M/s
Iter 1 ( 2.291us): hits 605.661M/s (151.415M/prod), drops 0.000M/s
Iter 2 ( -6.415us): hits 607.092M/s (151.773M/prod), drops 0.000M/s
Iter 3 ( -1.361us): hits 601.796M/s (150.449M/prod), drops 0.000M/s
Summary: hits 604.849 ± 2.739M/s (151.212M/prod), drops 0.000 ± 0.000M/s
Benchmark runner supports setting thread affinity for producer and consumer
threads. You can use -a flag for default CPU selection scheme, where first
consumer gets CPU #0, next one gets CPU #1, and so on. Then producer threads
pick up next CPU and increment one-by-one as well. But user can also specify
a set of CPUs independently for producers and consumers with --prod-affinity
1,2-10,15 and --cons-affinity <set-of-cpus>. The latter allows to force
producers and consumers to share same set of CPUs, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-3-andriin@fb.com
Add testing_helpers.c, which will contain generic helpers for test runners and
tests needing some common generic functionality, like parsing a set of
numbers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-2-andriin@fb.com
Before commit 74b5a5968f ("selftests/bpf: Replace test_progs and
test_maps w/ general rule") selftests/bpf used generic install
target from selftests/lib.mk to install generated bpf test progs
by mentioning them in TEST_GEN_FILES variable.
Take that functionality back.
Fixes: 74b5a5968f ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513021722.7787-1-yauheni.kaliuta@redhat.com
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200507185057.GA13981@embeddedor
The added test includes the following subtests:
- test verifier change for btf_id_or_null
- test load/create_iter/read for
ipv6_route/netlink/bpf_map/task/task_file
- test anon bpf iterator
- test anon bpf iterator reading one char at a time
- test file bpf iterator
- test overflow (single bpf program output not overflow)
- test overflow (single bpf program output overflows)
- test bpf prog returning 1
The ipv6_route tests the following verifier change
- access fields in the variable length array of the structure.
The netlink load tests the following verifier change
- put a btf_id ptr value in a stack and accessible to
tracing/iter programs.
The anon bpf iterator also tests link auto attach through skeleton.
$ test_progs -n 2
#2/1 btf_id_or_null:OK
#2/2 ipv6_route:OK
#2/3 netlink:OK
#2/4 bpf_map:OK
#2/5 task:OK
#2/6 task_file:OK
#2/7 anon:OK
#2/8 anon-read-one-char:OK
#2/9 file:OK
#2/10 overflow:OK
#2/11 overflow-e2big:OK
#2/12 prog-ret-1:OK
#2 bpf_iter:OK
Summary: 1/12 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175923.2477637-1-yhs@fb.com
The implementation is arbitrary, just to show how the bpf programs
can be written for bpf_map/task/task_file. They can be costomized
for specific needs.
For example, for bpf_map, the iterator prints out:
$ cat /sys/fs/bpf/my_bpf_map
id refcnt usercnt locked_vm
3 2 0 20
6 2 0 20
9 2 0 20
12 2 0 20
13 2 0 20
16 2 0 20
19 2 0 20
%%% END %%%
For task, the iterator prints out:
$ cat /sys/fs/bpf/my_task
tgid gid
1 1
2 2
....
1944 1944
1948 1948
1949 1949
1953 1953
=== END ===
For task/file, the iterator prints out:
$ cat /sys/fs/bpf/my_task_file
tgid gid fd file
1 1 0 ffffffff95c97600
1 1 1 ffffffff95c97600
1 1 2 ffffffff95c97600
....
1895 1895 255 ffffffff95c8fe00
1932 1932 0 ffffffff95c8fe00
1932 1932 1 ffffffff95c8fe00
1932 1932 2 ffffffff95c8fe00
1932 1932 3 ffffffff95c185c0
This is able to print out all open files (fd and file->f_op), so user can compare
f_op against a particular kernel file operations to find what it is.
For example, from /proc/kallsyms, we can find
ffffffff95c185c0 r eventfd_fops
so we will know tgid 1932 fd 3 is an eventfd file descriptor.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175922.2477576-1-yhs@fb.com
We want to have a tighter control on what ports we bind to in
the BPF_CGROUP_INET{4,6}_CONNECT hooks even if it means
connect() becomes slightly more expensive. The expensive part
comes from the fact that we now need to call inet_csk_get_port()
that verifies that the port is not used and allocates an entry
in the hash table for it.
Since we can't rely on "snum || !bind_address_no_port" to prevent
us from calling POST_BIND hook anymore, let's add another bind flag
to indicate that the call site is BPF program.
v5:
* fix wrong AF_INET (should be AF_INET6) in the bpf program for v6
v3:
* More bpf_bind documentation refinements (Martin KaFai Lau)
* Add UDP tests as well (Martin KaFai Lau)
* Don't start the thread, just do socket+bind+listen (Martin KaFai Lau)
v2:
* Update documentation (Andrey Ignatov)
* Pass BIND_FORCE_ADDRESS_NO_PORT conditionally (Andrey Ignatov)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-5-sdf@google.com
1. Move pkt_v4 and pkt_v6 into network_helpers and adjust the users.
2. Copy-paste spin_lock_thread into two tests that use it.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-3-sdf@google.com
Move the following routines that let us start a background listener
thread and connect to a server by fd to the test_prog:
* start_server - socket+bind+listen
* connect_to_fd - connect to the server identified by fd
These will be used in the next commit.
Also, extend these helpers to support AF_INET6 and accept the family
as an argument.
v5:
* drop pthread.h (Martin KaFai Lau)
* add SO_SNDTIMEO (Martin KaFai Lau)
v4:
* export extra helper to start server without a thread (Martin KaFai Lau)
* tcp_rtt is no longer starting background thread (Martin KaFai Lau)
v2:
* put helpers into network_helpers.c (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-2-sdf@google.com
Andrey pointed out that we can use reno instead of dctcp for CC
tests and drop CONFIG_TCP_CONG_DCTCP=y requirement.
Fixes: beecf11bc2 ("bpf: Bpf_{g,s}etsockopt for struct bpf_sock_addr")
Suggested-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200501224320.28441-1-sdf@google.com
Currently, bpf_getsockopt and bpf_setsockopt helpers operate on the
'struct bpf_sock_ops' context in BPF_PROG_TYPE_SOCK_OPS program.
Let's generalize them and make them available for 'struct bpf_sock_addr'.
That way, in the future, we can allow those helpers in more places.
As an example, let's expose those 'struct bpf_sock_addr' based helpers to
BPF_CGROUP_INET{4,6}_CONNECT hooks. That way we can override CC before the
connection is made.
v3:
* Expose custom helpers for bpf_sock_addr context instead of doing
generic bpf_sock argument (as suggested by Daniel). Even with
try_socket_lock that doesn't sleep we have a problem where context sk
is already locked and socket lock is non-nestable.
v2:
* s/BPF_PROG_TYPE_CGROUP_SOCKOPT/BPF_PROG_TYPE_SOCK_OPS/
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200430233152.199403-1-sdf@google.com
Check that verifier allows passing a map of type:
BPF_MAP_TYPE_REUSEPORT_SOCKARRARY, or
BPF_MAP_TYPE_SOCKMAP, or
BPF_MAP_TYPE_SOCKHASH
... to bpf_sk_select_reuseport helper.
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200430104738.494180-1-jakub@cloudflare.com
Update bpf_sk_assign test to fetch the server socket from SOCKMAP, now that
map lookup from BPF in SOCKMAP is enabled. This way the test TC BPF program
doesn't need to know what address server socket is bound to.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-4-jakub@cloudflare.com
Now that bpf_map_lookup_elem() is white-listed for SOCKMAP/SOCKHASH,
replace the tests which check that verifier prevents lookup on these map
types with ones that ensure that lookup operation is permitted, but only
with a release of acquired socket reference.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-3-jakub@cloudflare.com
With recent changes, runqslower is being copied into selftests/bpf root
directory. So add it into .gitignore.
Fixes: b26d1e2b60 ("selftests/bpf: Copy runqslower to OUTPUT directory")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Veronika Kabatova <vkabatov@redhat.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-12-andriin@fb.com
If condition is inverted, but it's also just not necessary.
Fixes: 1c1052e014 ("tools/testing/selftests/bpf: Add self-tests for new helper bpf_get_ns_current_pid_tgid.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Carlos Neira <cneirabustos@gmail.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-11-andriin@fb.com
AddressSanitizer assumes that all memory dereferences are done against memory
allocated by sanitizer's malloc()/free() code and not touched by anyone else.
Seems like this doesn't hold for perf buffer memory. Disable instrumentation
on perf buffer callback function.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-10-andriin@fb.com
Another one found by AddressSanitizer. input_len is bigger than actually
initialized data size.
Fixes: c7566a6969 ("selftests/bpf: Add field existence CO-RE relocs tests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-8-andriin@fb.com
getline() allocates string, which has to be freed.
Fixes: 81f77fd0de ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com
Free test selector substrings, which were strdup()'ed.
Fixes: b65053cd94 ("selftests/bpf: Add whitelist/blacklist of test names to test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-6-andriin@fb.com
Add ability to specify extra compiler flags with SAN_CFLAGS for compilation of
all user-space C files. This allows to build all of selftest programs with,
e.g., custom sanitizer flags, without requiring support for such sanitizers
from anyone compiling selftest/bpf.
As an example, to compile everything with AddressSanitizer, one would do:
$ make clean && make SAN_CFLAGS="-fsanitize=address"
For AddressSanitizer to work, one needs appropriate libasan shared library
installed in the system, with version of libasan matching what GCC links
against. E.g., GCC8 needs libasan5, while GCC7 uses libasan4.
For CentOS 7, to build everything successfully one would need to:
$ sudo yum install devtoolset-8-gcc devtoolset-libasan-devel
$ scl enable devtoolset-8 bash # set up environment
For Arch Linux to run selftests, one would need to install gcc-libs package to
get libasan.so.5:
$ sudo pacman -S gcc-libs
N.B. EXTRA_CFLAGS name wasn't used, because it's also used by libbpf's
Makefile and this causes few issues:
1. default "-g -Wall" flags are overriden;
2. compiling shared library with AddressSanitizer generates a bunch of symbols
like: "_GLOBAL__sub_D_00099_0_btf_dump.c", "_GLOBAL__sub_D_00099_0_bpf.c",
etc, which screws up versioned symbols check.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-3-andriin@fb.com
Ensure that test runner flavors include their own skeletons from <flavor>/
directory. Previously, skeletons generated for no-flavor test_progs were used.
Apart from fixing correctness, this also makes it possible to compile only
flavors individually:
$ make clean && make test_progs-no_alu32
... now succeeds ...
Fixes: 74b5a5968f ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-2-andriin@fb.com
As discussed at LPC 2019 ([0]), this patch brings (a quite belated) support
for declarative BTF-defined map-in-map support in libbpf. It allows to define
ARRAY_OF_MAPS and HASH_OF_MAPS BPF maps without any user-space initialization
code involved.
Additionally, it allows to initialize outer map's slots with references to
respective inner maps at load time, also completely declaratively.
Despite a weak type system of C, the way BTF-defined map-in-map definition
works, it's actually quite hard to accidentally initialize outer map with
incompatible inner maps. This being C, of course, it's still possible, but
even that would be caught at load time and error returned with helpful debug
log pointing exactly to the slot that failed to be initialized.
As an example, here's a rather advanced HASH_OF_MAPS declaration and
initialization example, filling slots #0 and #4 with two inner maps:
#include <bpf/bpf_helpers.h>
struct inner_map {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 1);
__type(key, int);
__type(value, int);
} inner_map1 SEC(".maps"),
inner_map2 SEC(".maps");
struct outer_hash {
__uint(type, BPF_MAP_TYPE_HASH_OF_MAPS);
__uint(max_entries, 5);
__uint(key_size, sizeof(int));
__array(values, struct inner_map);
} outer_hash SEC(".maps") = {
.values = {
[0] = &inner_map2,
[4] = &inner_map1,
},
};
Here's the relevant part of libbpf debug log showing pretty clearly of what's
going on with map-in-map initialization:
libbpf: .maps relo #0: for 6 value 0 rel.r_offset 96 name 260 ('inner_map1')
libbpf: .maps relo #0: map 'outer_arr' slot [0] points to map 'inner_map1'
libbpf: .maps relo #1: for 7 value 32 rel.r_offset 112 name 249 ('inner_map2')
libbpf: .maps relo #1: map 'outer_arr' slot [2] points to map 'inner_map2'
libbpf: .maps relo #2: for 7 value 32 rel.r_offset 144 name 249 ('inner_map2')
libbpf: .maps relo #2: map 'outer_hash' slot [0] points to map 'inner_map2'
libbpf: .maps relo #3: for 6 value 0 rel.r_offset 176 name 260 ('inner_map1')
libbpf: .maps relo #3: map 'outer_hash' slot [4] points to map 'inner_map1'
libbpf: map 'inner_map1': created successfully, fd=4
libbpf: map 'inner_map2': created successfully, fd=5
libbpf: map 'outer_hash': created successfully, fd=7
libbpf: map 'outer_hash': slot [0] set to map 'inner_map2' fd=5
libbpf: map 'outer_hash': slot [4] set to map 'inner_map1' fd=4
Notice from the log above that fd=6 (not logged explicitly) is used for inner
"prototype" map, necessary for creation of outer map. It is destroyed
immediately after outer map is created.
See also included selftest with some extra comments explaining extra details
of usage. Additionally, similar initialization syntax and libbpf functionality
can be used to do initialization of BPF_PROG_ARRAY with references to BPF
sub-programs. This can be done in follow up patches, if there will be a demand
for this.
[0] https://linuxplumbersconf.org/event/4/contributions/448/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-4-andriin@fb.com
Similar to commit b7a0d65d80 ("bpf, testing: Workaround a verifier failure for test_progs")
fix test_sysctl_prog.c as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
$(OUTPUT)/runqslower makefile target doesn't actually create runqslower
binary in the $(OUTPUT) directory. As lib.mk expects all
TEST_GEN_PROGS_EXTENDED (which runqslower is a part of) to be present in
the OUTPUT directory, this results in an error when running e.g. `make
install`:
rsync: link_stat "tools/testing/selftests/bpf/runqslower" failed: No
such file or directory (2)
Copy the binary into the OUTPUT directory after building it to fix the
error.
Fixes: 3a0d3092a4 ("selftests/bpf: Build runqslower from selftests")
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200428173742.2988395-1-vkabatov@redhat.com
cls_redirect is a TC clsact based replacement for the glb-redirect iptables
module available at [1]. It enables what GitHub calls "second chance"
flows [2], similarly proposed by the Beamer paper [3]. In contrast to
glb-redirect, it also supports migrating UDP flows as long as connected
sockets are used. cls_redirect is in production at Cloudflare, as part of
our own L4 load balancer.
We have modified the encapsulation format slightly from glb-redirect:
glbgue_chained_routing.private_data_type has been repurposed to form a
version field and several flags. Both have been arranged in a way that
a private_data_type value of zero matches the current glb-redirect
behaviour. This means that cls_redirect will understand packets in
glb-redirect format, but not vice versa.
The test suite only covers basic features. For example, cls_redirect will
correctly forward path MTU discovery packets, but this is not exercised.
It is also possible to switch the encapsulation format to GRE on the last
hop, which is also not tested.
There are two major distinctions from glb-redirect: first, cls_redirect
relies on receiving encapsulated packets directly from a router. This is
because we don't have access to the neighbour tables from BPF, yet. See
forward_to_next_hop for details. Second, cls_redirect performs decapsulation
instead of using separate ipip and sit tunnel devices. This
avoids issues with the sit tunnel [4] and makes deploying the classifier
easier: decapsulated packets appear on the same interface, so existing
firewall rules continue to work as expected.
The code base started it's life on v4.19, so there are most likely still
hold overs from old workarounds. In no particular order:
- The function buf_off is required to defeat a clang optimization
that leads to the verifier rejecting the program due to pointer
arithmetic in the wrong order.
- The function pkt_parse_ipv6 is force inlined, because it would
otherwise be rejected due to returning a pointer to stack memory.
- The functions fill_tuple and classify_tcp contain kludges, because
we've run out of function arguments.
- The logic in general is rather nested, due to verifier restrictions.
I think this is either because the verifier loses track of constants
on the stack, or because it can't track enum like variables.
1: https://github.com/github/glb-director/tree/master/src/glb-redirect
2: https://github.com/github/glb-director/blob/master/docs/development/second-chance-design.md
3: https://www.usenix.org/conference/nsdi18/presentation/olteanu
4: https://github.com/github/glb-director/issues/64
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200424185556.7358-2-lmb@cloudflare.com
To make BPF verifier verbose log more releavant and easier to use to debug
verification failures, "pop" parts of log that were successfully verified.
This has effect of leaving only verifier logs that correspond to code branches
that lead to verification failure, which in practice should result in much
shorter and more relevant verifier log dumps. This behavior is made the
default behavior and can be overriden to do exhaustive logging by specifying
BPF_LOG_LEVEL2 log level.
Using BPF_LOG_LEVEL2 to disable this behavior is not ideal, because in some
cases it's good to have BPF_LOG_LEVEL2 per-instruction register dump
verbosity, but still have only relevant verifier branches logged. But for this
patch, I didn't want to add any new flags. It might be worth-while to just
rethink how BPF verifier logging is performed and requested and streamline it
a bit. But this trimming of successfully verified branches seems to be useful
and a good default behavior.
To test this, I modified runqslower slightly to introduce read of
uninitialized stack variable. Log (**truncated in the middle** to save many
lines out of this commit message) BEFORE this change:
; int handle__sched_switch(u64 *ctx)
0: (bf) r6 = r1
; struct task_struct *prev = (struct task_struct *)ctx[1];
1: (79) r1 = *(u64 *)(r6 +8)
func 'sched_switch' arg1 has btf_id 151 type STRUCT 'task_struct'
2: (b7) r2 = 0
; struct event event = {};
3: (7b) *(u64 *)(r10 -24) = r2
last_idx 3 first_idx 0
regs=4 stack=0 before 2: (b7) r2 = 0
4: (7b) *(u64 *)(r10 -32) = r2
5: (7b) *(u64 *)(r10 -40) = r2
6: (7b) *(u64 *)(r10 -48) = r2
; if (prev->state == TASK_RUNNING)
[ ... instruction dump from insn #7 through #50 are cut out ... ]
51: (b7) r2 = 16
52: (85) call bpf_get_current_comm#16
last_idx 52 first_idx 42
regs=4 stack=0 before 51: (b7) r2 = 16
; bpf_perf_event_output(ctx, &events, BPF_F_CURRENT_CPU,
53: (bf) r1 = r6
54: (18) r2 = 0xffff8881f3868800
56: (18) r3 = 0xffffffff
58: (bf) r4 = r7
59: (b7) r5 = 32
60: (85) call bpf_perf_event_output#25
last_idx 60 first_idx 53
regs=20 stack=0 before 59: (b7) r5 = 32
61: (bf) r2 = r10
; event.pid = pid;
62: (07) r2 += -16
; bpf_map_delete_elem(&start, &pid);
63: (18) r1 = 0xffff8881f3868000
65: (85) call bpf_map_delete_elem#3
; }
66: (b7) r0 = 0
67: (95) exit
from 44 to 66: safe
from 34 to 66: safe
from 11 to 28: R1_w=inv0 R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-8=mmmm???? fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; bpf_map_update_elem(&start, &pid, &ts, 0);
28: (bf) r2 = r10
;
29: (07) r2 += -16
; tsp = bpf_map_lookup_elem(&start, &pid);
30: (18) r1 = 0xffff8881f3868000
32: (85) call bpf_map_lookup_elem#1
invalid indirect read from stack off -16+0 size 4
processed 65 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 4
Notice how there is a successful code path from instruction 0 through 67, few
successfully verified jumps (44->66, 34->66), and only after that 11->28 jump
plus error on instruction #32.
AFTER this change (full verifier log, **no truncation**):
; int handle__sched_switch(u64 *ctx)
0: (bf) r6 = r1
; struct task_struct *prev = (struct task_struct *)ctx[1];
1: (79) r1 = *(u64 *)(r6 +8)
func 'sched_switch' arg1 has btf_id 151 type STRUCT 'task_struct'
2: (b7) r2 = 0
; struct event event = {};
3: (7b) *(u64 *)(r10 -24) = r2
last_idx 3 first_idx 0
regs=4 stack=0 before 2: (b7) r2 = 0
4: (7b) *(u64 *)(r10 -32) = r2
5: (7b) *(u64 *)(r10 -40) = r2
6: (7b) *(u64 *)(r10 -48) = r2
; if (prev->state == TASK_RUNNING)
7: (79) r2 = *(u64 *)(r1 +16)
; if (prev->state == TASK_RUNNING)
8: (55) if r2 != 0x0 goto pc+19
R1_w=ptr_task_struct(id=0,off=0,imm=0) R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; trace_enqueue(prev->tgid, prev->pid);
9: (61) r1 = *(u32 *)(r1 +1184)
10: (63) *(u32 *)(r10 -4) = r1
; if (!pid || (targ_pid && targ_pid != pid))
11: (15) if r1 == 0x0 goto pc+16
from 11 to 28: R1_w=inv0 R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-8=mmmm???? fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; bpf_map_update_elem(&start, &pid, &ts, 0);
28: (bf) r2 = r10
;
29: (07) r2 += -16
; tsp = bpf_map_lookup_elem(&start, &pid);
30: (18) r1 = 0xffff8881db3ce800
32: (85) call bpf_map_lookup_elem#1
invalid indirect read from stack off -16+0 size 4
processed 65 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 4
Notice how in this case, there are 0-11 instructions + jump from 11 to
28 is recorded + 28-32 instructions with error on insn #32.
test_verifier test runner was updated to specify BPF_LOG_LEVEL2 for
VERBOSE_ACCEPT expected result due to potentially "incomplete" success verbose
log at BPF_LOG_LEVEL1.
On success, verbose log will only have a summary of number of processed
instructions, etc, but no branch tracing log. Having just a last succesful
branch tracing seemed weird and confusing. Having small and clean summary log
in success case seems quite logical and nice, though.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423195850.1259827-1-andriin@fb.com
Currently the following prog types don't fall back to bpf_base_func_proto()
(instead they have cgroup_base_func_proto which has a limited set of
helpers from bpf_base_func_proto):
* BPF_PROG_TYPE_CGROUP_DEVICE
* BPF_PROG_TYPE_CGROUP_SYSCTL
* BPF_PROG_TYPE_CGROUP_SOCKOPT
I don't see any specific reason why we shouldn't use bpf_base_func_proto(),
every other type of program (except bpf-lirc and, understandably, tracing)
use it, so let's fall back to bpf_base_func_proto for those prog types
as well.
This basically boils down to adding access to the following helpers:
* BPF_FUNC_get_prandom_u32
* BPF_FUNC_get_smp_processor_id
* BPF_FUNC_get_numa_node_id
* BPF_FUNC_tail_call
* BPF_FUNC_ktime_get_ns
* BPF_FUNC_spin_lock (CAP_SYS_ADMIN)
* BPF_FUNC_spin_unlock (CAP_SYS_ADMIN)
* BPF_FUNC_jiffies64 (CAP_SYS_ADMIN)
I've also added bpf_perf_event_output() because it's really handy for
logging and debugging.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200420174610.77494-1-sdf@google.com
This adds a new selftest that tests the ability to attach an freplace
program to a program type that relies on the expected_attach_type of the
target program to pass verification.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk
This patch adds a test to test_verifier that writes the lower 8 bits of
R10 (aka FP) using BPF_B to an array map and reads the result back. The
expected behavior is that the result should be the same as first copying
R10 to R9, and then storing / loading the lower 8 bits of R9.
This test catches a bug that was present in the x86-64 JIT that caused
an incorrect encoding for BPF_STX BPF_B when the source operand is R10.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200418232655.23870-2-luke.r.nels@gmail.com
When check_xadd() verifies an XADD operation on a pointer to a stack slot
containing a spilled pointer, check_stack_read() verifies that the read,
which is part of XADD, is valid. However, since the placeholder value -1 is
passed as `value_regno`, check_stack_read() can only return a binary
decision and can't return the type of the value that was read. The intent
here is to verify whether the value read from the stack slot may be used as
a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and
the type information is lost when check_stack_read() returns, this is not
enforced, and a malicious user can abuse XADD to leak spilled kernel
pointers.
Fix it by letting check_stack_read() verify that the value is usable as a
SCALAR_VALUE if no type information is passed to the caller.
To be able to use __is_pointer_value() in check_stack_read(), move it up.
Fix up the expected unprivileged error message for a BPF selftest that,
until now, assumed that unprivileged users can use XADD on stack-spilled
pointers. This also gives us a test for the behavior introduced in this
patch for free.
In theory, this could also be fixed by forbidding XADD on stack spills
entirely, since XADD is a locked operation (for operations on memory with
concurrency) and there can't be any concurrency on the BPF stack; but
Alexei has said that he wants to keep XADD on stack slots working to avoid
changes to the test suite [1].
The following BPF program demonstrates how to leak a BPF map pointer as an
unprivileged user using this bug:
// r7 = map_pointer
BPF_LD_MAP_FD(BPF_REG_7, small_map),
// r8 = launder(map_pointer)
BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8),
BPF_MOV64_IMM(BPF_REG_1, 0),
((struct bpf_insn) {
.code = BPF_STX | BPF_DW | BPF_XADD,
.dst_reg = BPF_REG_FP,
.src_reg = BPF_REG_1,
.off = -8
}),
BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8),
// store r8 into map
BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7),
BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP),
BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4),
BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0),
BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
BPF_EXIT_INSN(),
BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN()
[1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/
Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
David Ahern noticed that there was a bug in the EXPECTED_FD code so
programs did not get detached properly when that parameter was supplied.
This case was not included in the xdp_attach tests; so let's add it to be
sure that such a bug does not sneak back in down.
Fixes: 87854a0b57 ("selftests/bpf: Add tests for attaching XDP programs")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b0 ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).
This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).
Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.
Also adjust section_names selftest to account for this change.
More detailed discussion can be found in [0].
[0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/
Fixes: 5cf1e91456 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or
executable memory. Also validate that "downgrading" from writable to read-only
doesn't screw up internal writable count accounting for the purposes of map
freezing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
Daniel Borkmann says:
====================
pull-request: bpf 2020-04-10
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 7 day(s) which contain
a total of 13 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang.
2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov.
3) Fix oob write in AF_XDP when meta data is used, from Li RongQing.
4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified,
from Andrey Ignatov.
5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport
field uninitialized, from Joe Stringer.
6) Fix mprotect() test case for the BPF LSM, from KP Singh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add xdp_info selftest that makes sure that bpf_get_link_xdp_id returns
valid prog_id for different input modes:
* w/ and w/o flags when no program is attached;
* w/ and w/o flags when one program is attached.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/2a9a6d1ce33b91ccc1aa3de6dba2d309f2062811.1586236080.git.rdna@fb.com
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
