The current limit of 2 leads to some GPU idle times, as the usual
IRQ latency leads to up to 3 jobs getting signaled at once with some
standard workloads.
A larger HW job limit might lead to slightly worse QoS, but we accept
that to not sacrifice GPU throughput in the common case.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
etnaviv_sched_dependency() and etnaviv_sched_run_job() are only
used in this file, so make them static.
This fixes the following sparse warnings:
drivers/gpu/drm/etnaviv/etnaviv_sched.c:30:18: warning: symbol 'etnaviv_sched_dependency' was not declared. Should it be static?
drivers/gpu/drm/etnaviv/etnaviv_sched.c:81:18: warning: symbol 'etnaviv_sched_run_job' was not declared. Should it be static?
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The Page Table Array is a new first level structure above the MTLB
availabale on GPUs with the security feature. Use the PTa to set up
the MMU when the security related states are handled by the kernel driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
On GPUs with the security feature the MTLB config is stored in the PTA.
Add a function to trigger the initial PTA load through the FE.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
GPUs with support for the security features need some additional
setup to get the frontend started.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
With the introduction of GPU security we have 3 different modes of
GPU operation:
- GPU core doesn't have security features -> no handling required
- the security related states are handled by the kernel driver
- the security related states are handled by a TrustZone application
Add a enum to differentiate between the different operation modes.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
New versions of the Vivante kernel driver don't trust the hardware feature
bits anymore, but use an internal hardware database. This also includes
more feature fields than are available in hardware.
As we can't trust the hardware feature bits to be correct anymore, we need
to replicate the HWDB in etanviv. For now only the GC7000L as found on
the i.MX8M is supported.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Update the state HI and common header from rnndb commit
8478eef32fd9 (rnndb: document secure GPU reset bit).
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The slave interface clock is a clock input found on newer cores to gate
the register interface. For now we simply ungate it when the GPU is in
active state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Split out the fault dumping, as this will get more complex in the future.
Also there is no need to read and dump the fault address from MMUs that
didn't signal a fault.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The module autoloading can be triggered through the GPU core nodes
and the necessary platform device for the DRM toplevel device will
be instantiated on module init.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
This replaces the etnaviv internal hangcheck logic with the job timeout
handling provided by the DRM scheduler. This simplifies the driver further
and allows to replay jobs after a GPU reset, so only minimal state is lost.
This introduces a user-visible change in that we don't allow jobs to run
indefinitely as long as they make progress anymore, as this introduces
quality of service issues when multiple processes are using the GPU.
Userspace is now responsible to flush jobs in a way that the finish in a
reasonable time, where reasonable is currently defined as less than 500ms.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Populating objects, adding them to the GPU VM and patching/validating
the command stream might take a lot of CPU time. There is no reason to
hold all object reservations during that time.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Move the fence dependency handling to the scheduler where it belongs.
Jobs with unsignaled dependencies just get to sit in the scheduler queue
without holding any locks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This hooks in the DRM GPU scheduler. No improvement yet, as all the
dependency handling is still done in etnaviv_gem_submit. This just
replaces the actual GPU submit by passing through the scheduler.
Allows to get rid of the retire worker, as this is now driven by the
scheduler.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This moves away from using the internal seqno as the userspace fence
reference. By moving to a generic ID, we can later replace the internal
fence by something different than the etnaviv seqno fence.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Some architecture ports like ARC don't provide the PHYS_OFFSET symbol.
Define it to 0 in that case, which is the most conservative default in
the usage context of the etnaviv driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Fixes the following sparse warnings:
drivers/gpu/drm/etnaviv/etnaviv_iommu.c:161:39: warning:
symbol 'etnaviv_iommuv1_ops' was not declared. Should it be static?
drivers/gpu/drm/etnaviv/etnaviv_iommu_v2.c:239:39: warning:
symbol 'etnaviv_iommuv2_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
There is no need to hold the GPU lock while freeing the submit
object. Only move the retired submits from the GPU active list to
a temporary retire list under the GPU lock.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Now that the PMR lifetime issues are solved we can safely re-enable
performance counter profiling support.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
As long as there is an active submit, we want the GPU to stay awake. This
is slightly complicated by the fact that we really want to wake the GPU
at the last possible moment to achieve maximum power savings.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The active count is used to check if the BO is idle, where idle is defined
as not active on the GPU and all VM mappings and reference counts dropped
to the initial state. As the idling of the mappings and references now only
happens in the submit cleanup, the active state handling must be moved to
the same location in order to keep the userspace semantics.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Less dynamic allocations and slims down the cmdbuf object to only the
required information, as everything else is already available in the
submit object.
This also simplifies buffer and mappings lifetime management, as they
are now exlusively attached to the submit object and not additionally
to the cmdbuf.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The GPU exec state may have changed at the time when the perfmon sampling
is done, as it reflects the state of the last submission, not the current
GPU execution state.
So for proper sampling we must use the submit exec_state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
We'll need this in some places where only the submit is available. Also
this is a first step at slimming down the cmdbuf object.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
To make them available to the event worker even after the actual
command stream execution has finished.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The submit object lifetime will get extended to the actual GPU
execution. As multiple users will depend on this, add a kref to
properly control destruction of the object.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
The acquire_ctx is special in that it needs to be released from the same
thread as has been used to initialize it. This collides with the intention to
extend the submit lifetime beyond the gem_submit function with potentially
other threads doing the final cleanup.
Move the ww_acquire_ctx to the function local stack as suggested in the
documentation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
This is safe to call in all paths, as the BO_PINNED flag tells us if the BO
needs unpinning.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Simplifies the cleanup path and moves fence waiting to a central location.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
The object fencing has nothing to do with the actual GPU buffer submit,
so move it to the gem submit path to have a cleaner split.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Use kzalloc so other code doesn't need to worry about uninitialized members.
Drop the non-standard GFP flags, as we really don't want to fail the submit
when under slight memory pressure. Remove one level of indentation by using
an early return if the allocation failed. Also remove the unused drm device
member.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
When manipulating the kernel command buffer the GPU mutex must be held, as
otherwise different callers might try to replace the same part of the
buffer, wreacking havok in the GPU execution.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Inserting the END command when suspending the GPU is changing the
command buffer state, which requires the GPU to be held.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
While the etnaviv workqueue needs to be ordered, as we rely on work items
being executed in queuing order, this is only true for a single GPU.
Having a shared workqueue for all GPUs in the system limits concurrency
artificially.
Getting each GPU its own ordered workqueue still meets our ordering
expectations and enables retire workers to run concurrently.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no need to store this in the gpu struct. MMU flushes are triggered
correctly in reaction to MMU maps and unmaps, independent of the current ctx.
Any required pipe switches can be infered from the current and the desired
GPU exec state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
There is no need to synchronize with oustanding retire jobs if the object
has gone idle. Retire jobs only ever change the object state from active to
idle, not the other way around.
The IOVA put race is uncritical, as the GEM_WAIT ioctl itself is holding
a reference to the GEM object, so the retire worker will not pull the
object into the CPU domain, which is the thing we are trying to guard
against with etnaviv_gpu_wait_obj_inactive. The ordering of the various
counts and waits may change a bit, but the userspace visible behavior at
the bounds of the syscall are unchanged.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Flush and prefetch are properly handled in the buffer code, data endianess
would need much wider changes than adding something to this single function.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Now that the userptr BO handling doesn't rely on the userspace restarting
the submit after object population, there is no need to special case the
-EAGAIN return value anymore.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
All code paths which populate userptr BOs are fine with the get_pages
function taking the mmap_sem lock. This allows to get rid of the pretty
involved architecture with a worker being scheduled if the mmap_sem
needs to be taken, but instead call GUP directly and allow it to take
the lock if necessary.
This simplifies the code a lot and removes the possibility of this
function returning -EAGAIN, which complicates object population
handling at the callers.
A notable change in behavior is that we don't allow a process to populate
objects with user pages from a foreign MM anymore. This would have been an
invalid use before, as it breaks the assumptions made in the etnaviv kernel
driver to enfore cache coherence. We now disallow this by rejecting the
request to populate those objects. Well behaving userspace is unaffected by
this change.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This function never fails, as it does nothing more than adding the GEM
object to the global device list. Making this explicit through the void
return type allows to drop some unnecessary error handling.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
This function has only one caller and it isn't expected that there will
be any more in the future. Folding this function into the caller is
helping the readability.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The current userptr page population will defer work to a work item if
needed to avoid ever taking the mmap_sem in the direct call path. With
the more fine-grained locking in etnaviv this isn't needed anymore, so
a future commit will simplify this code.
Add a lockdep annotation to validate the assumption that the mmap_sem
can be taken in the direct call path.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Userptr, prime and shmem buffer objects have different lock ordering
requirements. This is mostly due to the fact that we don't allow to mmap
userptr buffers, so we won't ever end up in our fault handler for those,
so some of the code paths are never called with the mmap_sem held.
To avoid lockdep false positives, split them up into different lock classes.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
If the FE is restarted before the sync point event is cleared, the GPU
might trigger a completion IRQ for the next sync point, corrupting
the state of the currently running worker.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The etnaviv driver causes a link failure if it is built-in but THERMAL
is built as a module:
drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
etnaviv_gpu.c:(.text+0x4c4): undefined reference to `thermal_of_cooling_device_register'
etnaviv_gpu.c:(.text+0x600): undefined reference to `thermal_cooling_device_unregister'
drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
etnaviv_gpu.c:(.text+0x2aac): undefined reference to `thermal_cooling_device_unregister'
Adding a Kconfig dependency on THERMAL || !THERMAL to avoid this causes
a dependency loop on x86_64:
drivers/gpu/drm/tve200/Kconfig:1:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/tve200/Kconfig:1: symbol DRM_TVE200 depends on CMA
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
mm/Kconfig:489: symbol CMA is selected by DRM_ETNAVIV
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/etnaviv/Kconfig:2: symbol DRM_ETNAVIV depends on THERMAL
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/thermal/Kconfig:5: symbol THERMAL is selected by ACPI_VIDEO
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/acpi/Kconfig:189: symbol ACPI_VIDEO is selected by BACKLIGHT_CLASS_DEVICE
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/backlight/Kconfig:158: symbol BACKLIGHT_CLASS_DEVICE is selected by DRM_PARADE_PS8622
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/bridge/Kconfig:62: symbol DRM_PARADE_PS8622 depends on DRM_BRIDGE
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_TVE200
To work around this, add a new option DRM_ETNAVIV_THERMAL to optionally
enable thermal throttling support and make DRM_ETNAVIV select THERMAL
at the same time.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Add a jump target so that a call of the function "mutex_unlock" is stored
only once at the end of this function implementation.
Replace three calls by goto statements.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Add GL.OCCLUSION_QUERY_ADDR (0x03824): address where GPU stores
the occlusion query result.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
All callers of release_pages claim the pages being released are cache
hot. As no one cares about the hotness of pages being released to the
allocator, just ditch the parameter.
No performance impact is expected as the overhead is marginal. The
parameter is removed simply because it is a bit stupid to have a useless
parameter copied everywhere.
Link: http://lkml.kernel.org/r/20171018075952.10627-7-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: etnaviv@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The feature implementation isn't stable yet. Reject any attempt to use
the IOCTLs for now. This keeps most of the code in place, so we can stabilize
it in-tree, but keeps userspace from using the feature for now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The performance monitoring feature isn't stable enough yet, so don't advertise
it to userspace yet.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Most notable addition this time is the support for the GPU performance
counters by Christian. This has been in the making for some time and it
has matured a lot. Since this is adding UAPI, the corresponding WIP
userspace can be found at [1] mesa/libdrm repos. I expect that
Christian sends out the final userspace patches for this once you have
pulled the kernel bits.
Philipp optimized the probe path, so etnaviv gets out of the way for
systems that want to boot real quick.
I've done mostly cleanups, disentangling etnaviv from the IOMMU API,
with some MMUv1 optimizations on the way.
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (36 commits)
drm/etnaviv: remove unnecessary clock stabilization delay
drm/etnaviv: reduce reset delay
drm/etnaviv: remove unused function etnaviv_gem_new
drm/etnaviv: remove stale comment
drm/etnaviv: submit supports performance monitor requests
drm/etnaviv: enable debug registers on demand
drm/etnaviv: need to disable clock gating when doing profiling
drm/etnaviv: add MC perf domain
drm/etnaviv: add TX perf domain
drm/etnaviv: add RA perf domain
drm/etnaviv: add SE perf domain
drm/etnaviv: add PA perf domain
drm/etnaviv: add SH perf domain
drm/etnaviv: add PE perf domain
drm/etnaviv: add HI perf domain
drm/etnaviv: use 'sync points' for performance monitor requests
drm/etnaviv: clear alloced event
drm/etnaviv: add 'sync point' support
drm/etnaviv: add performance monitor request processing
drm/etnaviv: copy pmrs from userspace
...
There is no reason to wait for clock stabilization here, as the clock
framework guarantees that PLL clock sources are stable before clk_enable
returns.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
After reset assertion, we only have to wait for the reset signals to
propagate through the GPU before deasserting the reset again. A few
hundred clock cycles should be more than enough. Replace the msleep(1),
which can actually take about 30 ms on i.MX6Q in some configurations,
with an usleep_range of a few microseconds. If the delay was too short,
the FE would not be idle afterwards, and the reset would be retried.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This comment is outdated as the driver is taking care about clock
gating and the pulse eater for quite some time already.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
We increment the minor driver version so userspace can detect perfmon support.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some performance register are debug register and they need to
be enabled in order to be functional.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
As done by Vivante kernel driver.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
We need to iterate over all pixel pipelines to get overall value.
Changes from v4 -> v5:
- switch back to pixel pipe 0 to prevent GPU hang
- PIXELS_RENDERED_2D is exposed for 2D pipe
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
With 'sync points' we can sample the reqeustes perform signals
before and/or after the submited command buffer.
Changes v2 -> v3:
- fixed indentation and init nr_events to 1
Changes v4 -> v5:
- simplify logic around fence handling.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Results in less code as the users do not set every struct member to 0/NULL.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
In order to support performance counters in a sane way we need to provide
a method to sync the GPU with the CPU. The GPU can process multpile command
buffers/events per irq. With the help of a 'sync point' we can trigger an event
and stop the GPU/FE immediately. When the CPU is done with is processing it
simply needs to restart the FE and the GPU will process the command stream.
Changes from v1 -> v2:
- process sync point with a work item to keep irq as fast as possible
Changes from v4 -> v5:
- renamed pmrs_* to sync_point_*
- call event_free(..) in sync_point_worker(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Changes v4 -> v5
- make use of doms_meta array
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Changes from v1 -> v2:
- renamed submit_perfmon_request() to submit_perfmon_validate()
- extended flags validation
- added comment about offset 0
- moved assigment of cmdbuf->nr_pmrs below the copy_from_user of the pmrs.
Changes from v2 -> v3:
- fixed flags validation
Changes v4 -> v5
- pass cmdbuf->exec_state to etnaviv_pm_req_validate(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Check if the selected domain and signal combination exists.
Changes from v4 to v5
- add exec_state parameter
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This commits extends etnaviv_gpu_cmdbuf_new(..) to define the number
of struct etnaviv_perfmon elements gets used.
Changes from v1 -> v2:
- make use of goto as requested by Lucas
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Make it possible that userspace can query all performance domains and
its signals. This information is needed to sample those signals via
submit ioctl.
At the moment no performance domain is available.
Changes from v1 -> v2:
- use a 16 bit value for signals
- fix padding issues
- add id member to domain and signal struct
Changes v4 -> v5
- provide for each pipe an own set of pm domains
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This makes it possible to allocate multiple events under the event
spinlock. This change is needed to support 'sync'-points.
Changes v2 -> v3:
- wait for the completion of all events
- use 10sec timeout regardless of the number of events
- removed validation if there are enough free events
- fixed return value evaluation of event_alloc(..) in etnaviv_gpu_submit(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This is prep work to be able to allocate multiple events in one go.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The reset path wants to initialize the clock control register regardless
of the DYNAMIC_FREQUENCY_SCALING feature, so don't call clock update, but
explicitly load the register.
Also disabling of the debug registers is moved into the reset function,
so we always get to the same state after a GPU reset. This means the
clock update function should not touch the bits already set in the clock
control register, but instead only update the scaling bits.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Using the IOMMU API to manage the internal GPU MMU has been an
historical accident and it keeps getting in the way, as well as
entangling the driver with the inner workings of the IOMMU
subsystem.
Clean this up by removing the usage of iommu_domain, which is the
last piece linking etnaviv to the IOMMU subsystem.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
And clean up the header file a bit.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
This is a preparation to remove the etnaviv dependency on the IOMMU
subsystem by importing the relevant parts of the iommu map/unamp
functions into the driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
It wasn't protecting anything, as the single word writes used to
set up or tear down a translation are already inherently atomic,
so the spinlock is pure overhead.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
A function doing a single assignment is not really helping the
code flow.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Those functions are simple enough to fold them into the calling
function. This also fixes a correctness issue, as the alloc/free
functions didn't specifiy the device the memory was allocated for.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
They are not used in any way, so can go away.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
The handler has never been used, so it's really just dead code.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Just two small etnaviv fixes, one fixing a list corruption, the other
fixing a NULL ptr deref in an error path.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
etnaviv: fix gem object list corruption
etnaviv: fix submit error path
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All manipulations of the gem_object list need to be protected by
the list mutex, as GEM objects can be created and freed in parallel.
This fixes a kernel memory corruption.
CC: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
If the gpu submit fails, bail out to avoid accessing a potentially
unititalized fence.
CC: stable@vger.kernel.org #4.12+
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
