5 Commits

Author	SHA1	Message	Date
Vasily Gorbik	54fb07d030	s390/sclp: avoid using strncmp with hardcoded length ... "earlyprintk" option documentation does not clearly state which platform supports which additional values (e.g. ",keep"). Preserve old option behaviour and reuse str_has_prefix instead of strncmp for prefix testing. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>	2019-08-29 15:34:58 +02:00
Gerald Schaefer	55a5542a54	s390/hibernate: fix error handling when suspend cpu != resume cpu ... The resume code checks if the resume cpu is the same as the suspend cpu. If not, and if it is also not possible to switch to the suspend cpu, an error message should be printed and the resume process should be stopped by loading a disabled wait psw. The current logic is broken in multiple ways, the message is never printed, and the disabled wait psw never loaded because the kernel panics before that: - sam31 and SIGP_SET_ARCHITECTURE to ESA mode is wrong, this will break on the first 64bit instruction in sclp_early_printk(). - The init stack should be used, but the stack pointer is not set up correctly (missing aghi %r15,-STACK_FRAME_OVERHEAD). - __sclp_early_printk() checks the sclp_init_state. If it is not sclp_init_state_uninitialized, it simply returns w/o printing anything. In the resumed kernel however, sclp_init_state will never be uninitialized. This patch fixes those issues by removing the sam31/ESA logic, adding a correct init stack pointer, and also introducing sclp_early_printk_force() to allow using sclp_early_printk() even when sclp_init_state is not uninitialized. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>	2018-09-20 13:20:23 +02:00
Greg Kroah-Hartman	b24413180f	License cleanup: add SPDX GPL-2.0 license identifier to files with no license ... Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2017-11-02 11:10:55 +01:00
Heiko Carstens	d5ab7a34f9	s390/sclp: make early sclp code readable ... This patch - unifies the old sclp early code and the sclp early printk code, so they can use common functions - makes sure all sclp early functions and variables have the same "sclp_early" prefix - converts the sclp early printk code into readable code by using existing data structures instead of hard coded magic arrays - splits the early sclp code into two files: sclp_early.c and sclp_early_core.c. The core file contains everything that is required by the kernel decompressor and may not call functions not contained within the core file. Otherwise the result would be a link error. - changes interrupt handling to be completely synchronous. The old early sclp code had a small window which allowed to receive several interrupts instead of exactly the single expected interrupt. This did hide a subtle potential bug, which is fixed with this large rework. - contains a couple of small cleanups. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>	2017-02-08 14:13:19 +01:00
Heiko Carstens	89175cf766	s390: provide sclp based boot console ... Use the early sclp code to provide a boot console. This boot console is available if the kernel parameter "earlyprintk" has been specified, just like it works for other architectures that also provide an early boot console. This makes debugging of early problems much easier, since now we finally have working console output even before memory detection is running. The boot console will be automatically disabled as soon as another console will be registered. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>	2017-01-16 07:27:55 +01:00