Commit Graph

662353 Commits

Author SHA1 Message Date
Hendrik Brueckner
66a49784f9 s390/cpum_cf: correct variable naming (cleanup)
Make clear that the event definitions relate to the counter
facility (cf) and not to the sampling facility (sf).

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-31 07:53:33 +02:00
Hendrik Brueckner
3fc7acebae s390/cpum_cf: add IBM z13 counter event names
Add the event names for the IBM z13/z13s specific CPU-MF counters.

Also improve the merging of the generic and model specific events
so that their sysfs attribute definitions completely reside in
memory.  Hence, flagging the generic event attribute definitions
as initdata too.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-31 07:53:32 +02:00
Hendrik Brueckner
ee699f329a s390/cpum_cf: add support for the MT-diagnostic counter set (z13)
Complete the IBM z13 support and support counters from the
MT-diagnostic counter set.  Note that this counter set is
available only if SMT is enabled.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-31 07:53:30 +02:00
Hendrik Brueckner
db17160dce s390/cpum_cf: cleanup event/counter validation
The validate_event() function just checked for reserved counters
in particular CPU-MF counter sets.  Because the number of counters
in counter sets vary among different hardware models, remove the
explicit check to tolerate new models.

Reserved counters are not accounted and, thus, will return zero.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-31 07:53:29 +02:00
Hendrik Brueckner
20ba46da36 s390/cpum_cf: update counter numbers to ecctr limits
Use the highest counter number that can be specified for the
ecctr (extract CPU counter) instruction for perf.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-31 07:53:26 +02:00
Heiko Carstens
4d6e51c740 s390: use generic headers if possible
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-30 08:19:53 +02:00
Heiko Carstens
c30abecb39 s390/uapi: use generic headers if possible
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-30 08:19:50 +02:00
Heiko Carstens
b8402b957d s390: make MAX_PHYSMEM_BITS configurable
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:55:10 +02:00
Heiko Carstens
fd15a1f333 s390: enable ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
Deferred struct page initialization works on s390. However it makes
only sense for the fake numa case, since the kthreads that initialize
struct pages are started per node. Without fake numa there is just a
single node and therefore no gain.
However there is no reason to not enable this feature. Therefore
select the config option and enable the feature in all config files.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:54:32 +02:00
Christian Borntraeger
b8f9828034 s390/MAINTAINERS: add gmap.c to kvm maintainers
gmap.c deals mostly with KVM-related memory management, so a lot
of changes to this file will come via the KVM tree. Reflect this
in MAINTAINERS. Please note that there are intricate ties to
arch/s390/mm/pgtable.c. If changes are needed in both files,
this will continue to be submitted via the s390 tree (or a
topic branch if necessary).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:54:32 +02:00
Michael Holzheu
dcc00b79fc s390/kdump: Add final note
Since linux v3.14 with commit 38dfac843c ("vmcore: prevent PT_NOTE
p_memsz overflow during header update") on s390 we get the following
message in the kdump kernel:

  Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x6b6b6b6b,
  n_descsz=0x6b6b6b6b

The reason for this is that we don't create a final zero note in
the ELF header which the proc/vmcore code uses to find out the end
of the notes section (see also kernel/kexec_core.c:final_note()).

It still worked on s390 by chance because we (most of the time?) have the
byte pattern 0x6b6b6b6b after the notes section which also makes the notes
parsing code stop in update_note_header_size_elf64() because 0x6b6b6b6b is
interpreded as note size:

  if ((real_sz + sz) > max_sz) {
          pr_warn("Warning: Exceeded p_memsz, dropping P ...);
          break;
  }

So fix this and add the missing final note to the ELF header.
We don't have to adjust the memory size for ELF header ("alloc_size")
because the new ELF note still fits into the 0x1000 base memory.

Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:54:31 +02:00
Heiko Carstens
59cea29a34 s390: remove HAVE_ARCH_EARLY_PFN_TO_NID select statement
HAVE_ARCH_EARLY_PFN_TO_NID selects a not present Kconfig
option. Therefore remove it.
Given that the first call of early_pfn_to_nid() happens after
numa_setup() finished to establish the memory to node mapping, there
is no need to implement an architecture private version of
__early_pfn_to_nid() like (only) ia64 does.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:54:30 +02:00
Stefan Haberland
ab24fbd35a s390/dasd: suppress command reject error for query host access command
On some z/VM systems the query host access command is not supported for
temp disks, though the corresponding feature code is set.
This does not have any impact beside that the information is not available.
Suppress the full blown command reject error messages to not confuse the
user. The error is still logged in the s390dbf.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:54:28 +02:00
Stefan Haberland
ccd53fa226 s390/dasd: check if query host access feature is supported
Some storage servers might not support the query host access feature.
Check if the corresponding feature code is set.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:54:27 +02:00
Janosch Frank
2fa5ed7d87 s390/mm: Remove double gaddr calculation when notifying
ptep_notify and gmap_shadow_notify both need a guest address and
therefore retrieve them from the available virtual host address.

As they operate on the same guest address, we can calculate it once
and then pass it on. As a gmap normally has more than one shadow gmap,
we also do not recalculate for each of them any more.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-24 16:11:30 +01:00
Heiko Carstens
0b7bb6af1d s390/facilities: get rid of __ASSEMBLY__ in facility header file
There is no need for the __ASSEMBLY__ ifdefery anymore since the
architecture level set code that deals with facility bits was
converted to C in the meantime.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:18 +01:00
Heiko Carstens
6f5165e864 s390/facilites: use stfle_fac_list array size for MAX_FACILITY_BIT
Use the actual size of the facility list array within the lowcore
structure for the MAX_FACILITY_BIT define instead of a comment which
states what this is good for. This makes it a bit harder to break
things.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:17 +01:00
Heiko Carstens
cdd3bd9d61 s390/sysinfo: provide remaining stsi information via debugfs
Provide the remaining stsi information via debugfs files. This also
might be useful for debugging purposes.

Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:17 +01:00
Heiko Carstens
ae5ca67aca s390/sysinfo,topology: provide raw stsi 15,1,x data via debugfs
Provide the raw stsi 15,1,x data contents via debugfs. This makes it
much easier to debug unexpected scheduling domains on machines that
provide cpu topology information.

Therefore this file adds a new 's390/stsi' debugfs directory with a
file for each possible topology nesting level that is allowed by the
architecture. The files will be created regardless if the machine
supports all, or any, level.  If a level is not supported, or no data
is available, user space can recognize this with a -EINVAL error code
when trying to read such data.
In addition a 'topology' symlink is created that points to the file
that contains the data that is used to create the scheduling domains.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:15 +01:00
Heiko Carstens
050f99b1b8 s390/debugfs: introduce top-level 's390' directory
Introduce a top-level 's390' directory which should be used when
adding new s390 specific debug feature files and/or directories.

This makes hopefully sure that the contents of the s390 directory will
be a bit more structured. Right now we have a couple of top-level
files where it is not easy to tell to which subsystem they belong to.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:15 +01:00
Harald Freudenberger
e61a6134e7 s390/pkey: Introduce new API for secure key verification
User space needs some information about the secure key(s)
before actually invoking the pkey and/or paes funcionality.
This patch introduces a new ioctl API and in kernel API to
verify the the secure key blob and give back some
information about the key (type, bitsize, old MKVP).
Both APIs are described in detail in the header files
arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:13 +01:00
Michael Holzheu
15d3387c3c s390/configs//zfcpdump_defconfig: Remove CONFIG_SCSI_SRP_ATTRS
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:12 +01:00
Heiko Carstens
2f8876f984 s390/dump_stack: use control program identification string
If running within a level 3 hypervisor, the hypervisor provides a
SYSIB block which contains a control program indentifier string. Use
this string instead of the simple KVM and z/VM strings only. In case
of z/VM this provides addtional information: the z/VM version.

The new string looks similar to this:

Hardware name: IBM 2964 N96 702 (z/VM 6.4.0)

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:11 +01:00
Heiko Carstens
d2f0397425 s390/dump_stack: remove whitespace from arch description
The arch description provided for the "Hardware name:" contains lots
of extra whitespace due to the way the SYSIB contents are defined
(strings aren't zero terminated).
This looks a bit odd and therefore remove the extra whitespace
characters. This also gives the opportunity to add more information,
if required, without hitting the magic 80 characters per line limit.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:09 +01:00
Heiko Carstens
59808fc819 s390/sysinfo: allow compiler warnings again
Allow compiler warnings again for the sysinfo file. Compiler warnings
were disabled when the bogomips calculation with math-emu code was
introduced ("[S390] Calibrate delay and bogomips.").
Since that code is gone, we can enable warnings again.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:08 +01:00
Heiko Carstens
4fd4dd8bff s390/topology: fix typo in early topology code
Use MACHINE_FLAG_TOPOLOGY instead of MACHINE_HAS_TOPOLOGY when
clearing the bit that indicates if the machine provides topology
information (and if it should be used). Currently works anyway.

Fixes: 68cc795d19 ("s390/topology: make "topology=off" parameter work")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:08 +01:00
Heiko Carstens
251ea0ca40 s390/topology: get rid of core mask array
Use a single long value instead of a single element array to represent
the core mask. The array is a leftover from 32/31 bit code so we were
able to use bitops helper functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:07 +01:00
Heiko Carstens
9b62330fa0 s390/bitops: remove outdated comment
The s390 specific little endian bitop macros are gone since a long time.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:05 +01:00
Michal Hocko
faee35a57b s390: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

page_table_alloc then uses the flag for a single page allocation. This
means that this flag has never been actually useful here because it has
always been used only for PAGE_ALLOC_COSTLY requests.

An earlier attempt to remove the flag 10d58bf297 ("s390: get rid of
superfluous __GFP_REPEAT") has missed this one but the situation is very
same here.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:04 +01:00
Heiko Carstens
157467ba9f s390/cpuinfo: show facilities as reported by stfle
Add a new line to /proc/cpuinfo which shows all available facilities
as reported by the stfle instruction:

> cat /proc/cpuinfo
...
facilities      : 0 1 2 3 4 6 7 ...
...

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:02 +01:00
Heiko Carstens
09214545c4 s390/bitops: add for_each_set_bit_inv helper
Same helper function like for_each_set_bit in generic code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:29:01 +01:00
Martin Schwidefsky
bffc880b45 Merge branch 'guarded-storage' into 'features' to make merging with
the KVM tree easier.
2017-03-22 08:22:02 +01:00
Harald Freudenberger
ca681ec860 s390/pkey: Fix wrong handling of secure key with old MKVP
When a secure key with an old Master Key Verification
Pattern was given to the pkey_findcard function, there was
no responsible card found because only the current MKVP of
each card was compared. With this fix also the old MKVP
values are considered and so a matching card able to handle
the key is reported back to the caller.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:21:20 +01:00
Heiko Carstens
0861b5a754 s390/smp: fix ipl from cpu with non-zero address
Commit af51160ebd ("s390/smp: initialize cpu_present_mask in
setup_arch") initializes the cpu_present_mask much earlier than
before. However the cpu detection code relies on the fact that iff
logical cpu 0 is marked present then also the corresponding physical
cpu address within the pcpu_devices array slot is valid.

Since commit 44fd22992c ("[PATCH] Register the boot-cpu in the cpu
maps earlier") this assumption is not true anymore. The patch marks
logical cpu 0 as present in common code without that architecture code
had a chance to setup the logical to physical map.

With that change the cpu detection code assumes that the physical cpu
address of cpu 0 is also 0, which is not necessarily true.
Subsequently the physical cpu address of the ipl cpu will be mapped to
a different logical cpu. If that cpu is brought online later the ipl
cpu will send itself an initial cpu reset sigp signal. This in turn
completely resets the ipl cpu and the system stops working.

A dump of such a system looks like a "store status" has been
forgotten. But actually the kernel itself removed all traces which
would allow to easily tell what went wrong.

To fix this initialize the logical to physical cpu address already in
smp_setup_processor_id(). In addition remove the initialization of the
cpu_present_mask and cpu_online_mask for cpu 0, since that has already
been done. Also add a sanity check, just in case common code will be
changed again...

The problem can be easily reproduced within a z/VM guest:

> chcpu -d 0
> vmcp ipl

Fixes: af51160ebd ("s390/smp: initialize cpu_present_mask in setup_arch")
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:21:20 +01:00
Marcelo Henrique Cerri
d82c0d12c9 s390/decompressor: fix initrd corruption caused by bss clear
Reorder the operations in decompress_kernel() to ensure initrd is moved
to a safe location before the bss section is zeroed.

During decompression bss can overlap with the initrd and this can
corrupt the initrd contents depending on the size of the compressed
kernel (which affects where the initrd is placed by the bootloader) and
the size of the bss section of the decompressor.

Also use the correct initrd size when checking for overlaps with
parmblock.

Fixes: 06c0dd72ae ([S390] fix boot failures with compressed kernels)
Cc: stable@vger.kernel.org
Reviewed-by: Joy Latten <joy.latten@canonical.com>
Reviewed-by: Vineetha HariPai <vineetha.hari.pai@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:21:20 +01:00
Martin Schwidefsky
916cda1aa1 s390: add a system call for guarded storage
This adds a new system call to enable the use of guarded storage for
user space processes. The system call takes two arguments, a command
and pointer to a guarded storage control block:

    s390_guarded_storage(int command, struct gs_cb *gs_cb);

The second argument is relevant only for the GS_SET_BC_CB command.

The commands in detail:

0 - GS_ENABLE
    Enable the guarded storage facility for the current task. The
    initial content of the guarded storage control block will be
    all zeros. After the enablement the user space code can use
    load-guarded-storage-controls instruction (LGSC) to load an
    arbitrary control block. While a task is enabled the kernel
    will save and restore the current content of the guarded
    storage registers on context switch.
1 - GS_DISABLE
    Disables the use of the guarded storage facility for the current
    task. The kernel will cease to save and restore the content of
    the guarded storage registers, the task specific content of
    these registers is lost.
2 - GS_SET_BC_CB
    Set a broadcast guarded storage control block. This is called
    per thread and stores a specific guarded storage control block
    in the task struct of the current task. This control block will
    be used for the broadcast event GS_BROADCAST.
3 - GS_CLEAR_BC_CB
    Clears the broadcast guarded storage control block. The guarded-
    storage control block is removed from the task struct that was
    established by GS_SET_BC_CB.
4 - GS_BROADCAST
    Sends a broadcast to all thread siblings of the current task.
    Every sibling that has established a broadcast guarded storage
    control block will load this control block and will be enabled
    for guarded storage. The broadcast guarded storage control block
    is used up, a second broadcast without a refresh of the stored
    control block with GS_SET_BC_CB will not have any effect.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22 08:14:25 +01:00
Huang Ying
093b995e3b mm, swap: Remove WARN_ON_ONCE() in free_swap_slot()
Before commit 452b94b8c8 ("mm/swap: don't BUG_ON() due to
uninitialized swap slot cache"), the following bug is reported,

  ------------[ cut here ]------------
  kernel BUG at mm/swap_slots.c:270!
  invalid opcode: 0000 [#1] SMP
  CPU: 5 PID: 1745 Comm: (sd-pam) Not tainted 4.11.0-rc1-00243-g24c534bb161b #1
  Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016
  RIP: 0010:free_swap_slot+0xba/0xd0
  Call Trace:
   swap_free+0x36/0x40
   do_swap_page+0x360/0x6d0
   __handle_mm_fault+0x880/0x1080
   handle_mm_fault+0xd0/0x240
   __do_page_fault+0x232/0x4d0
   do_page_fault+0x20/0x70
   page_fault+0x22/0x30
  ---[ end trace aefc9ede53e0ab21 ]---

This is raised by the BUG_ON(!swap_slot_cache_initialized) in
free_swap_slot().  This is incorrect, because even if the swap slots
cache fails to be initialized, the swap should operate properly without
the swap slots cache.  And the use_swap_slot_cache check later in the
function will protect the uninitialized swap slots cache case.

In commit 452b94b8c8, the BUG_ON() is replaced by WARN_ON_ONCE().  In
the patch, the WARN_ON_ONCE() is removed too.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-21 14:13:19 -07:00
Linus Torvalds
1f02071358 SCSI fixes on 20170321
Nine small fixes: the biggest is probably finally sorting out Kconfig
 issues with lpfc nvme.  There are some performance fixes for megaraid
 and hpsa and a static checker fix.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJY0UHhAAoJEAVr7HOZEZN4Pm4QAII49optwEoUAy616fR4Vj6C
 SA2EmjfAi6tKvvYO88rwfN8KTFkQgsoLa9OmoLFjexTlAAoIG+ixL+SHLwz0nXgG
 4tar9vvRnT97MuaXgIxPrNpAOao2OSiFZd3B4rUItYClWhpjZcBhlQogif6S3/qb
 sLomKklX7bFfzmtwRtkgDjSdV7Iyx+IAOZAAIi9TmRu+uFoySs6c2Z6zKzfTMx9c
 Wc94sS3UvIptpXFncqHgXjOm+/hELjzqC67DrJUu2CbayyRAGF0Aur5QO6FMJOiQ
 dNr4k91kVBuvH+Um9WfHTZdqWD/4DzKblP/DwF0EoOerstQMNZrDwlex47pJ80Oa
 8VcoMrtJmsCD/bUaZZoxZpIo+OFbE20/mMy/JdoyEl59L1B9NGH+njDDigD4m57t
 NhWgyNQN1pbiSbY4dpyT+YYTI0JO2bR9Ye7VVbbeDVhJZlTUrF6D2MbsDMC2zz+f
 oGsoF1wBRDw6Q7rY1I8TmCM0qsdE2dbXpCmnaQK4VJpQgiZs5fyA+HhQ82r1SFq1
 yN6uCcbbjwNIRyVygtRmRmvyz3V67rIryIV625vMj37xi1ttTEdc1NaKgpaclUaK
 yvHlK/izzrU+k8P8V/uOt4oac2T8gyCH1q5GD8IKjzFGbODgQfuUXjFM40083xIQ
 W3miZdQlV0PgUIrO8/B4
 =Z4Xj
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Nine small fixes: the biggest is probably finally sorting out Kconfig
  issues with lpfc nvme.  There are some performance fixes for megaraid
  and hpsa and a static checker fix"

[ Johannes Thumshirn points out that there still seems to be more lpfc
  vs nvme config issues.  Oh well.   - Linus ]

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Finalize Kconfig options for nvme
  scsi: ufs: don't check unsigned type for a negative value
  scsi: hpsa: do not timeout reset operations
  scsi: hpsa: limit outstanding rescans
  scsi: hpsa: update check for logical volume status
  scsi: megaraid_sas: Driver version upgrade
  scsi: megaraid_sas: raid6 also require cpuSel check same as raid5
  scsi: megaraid_sas: add correct return type check for ldio hint logic for raid1
  scsi: megaraid_sas: enable intx only if msix request fails
2017-03-21 13:10:17 -07:00
Linus Torvalds
2c867ac395 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:

 - regression fixes for Wacom devices, from Aaron Armstrong Skomra and
   Ping Cheng

 - memory leak in hid-sony driver from Roderick Colenbrander

 - new device IDs support from Oscar Campos and Daniel Drake

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: generic: Wacom mouse is only provided for opaque tablets
  HID: corsair: Add driver Scimitar Pro RGB gaming mouse 1b1c:1b3e support to hid-corsair
  HID: corsair: support for K65-K70 Rapidfire and Scimitar Pro RGB
  HID: wacom: don't manually release resources for the EKR
  HID: wacom: Correct Intuos Pro 2 resolution
  HID: sony: Fix input device leak when connecting a DS4 twice using USB/BT
  HID: chicony: Add support for another ASUS Zen AiO keyboard
2017-03-21 13:07:18 -07:00
Linus Torvalds
4719177780 GPIO fixes for the v4.11 series:
- Set the parent on the Altera A10SR driver, also fix
   high level IRQs.
 
 - Fix error path on the mockup driver.
 
 - Compilation noise about unused functions fixed.
 
 - Fix missed interrupts on the MCP23S08 expander, this is also
   tagged for stable.
 
 - Retire the interrim helpers devm_get_gpiod_from_child() used
   to smoothen merging in the merge window.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJY0OCEAAoJEEEQszewGV1zHE8P/jKp3dGg+nfMrDTucBkutyW2
 BVs0cnTI3v27LglzDT8S5enoPs1yMvDQtIIk/Ma5Lspt4ewrfjr9C9ycDT9/NNRW
 bcHG1YyGhNeAPBug5ZoMIqVrEQvz0Ux4P//gkMXnLqHIS5r2Lk9LsQiKSfwh/zTa
 +rMzB3p6zTGtm1by/csBi8kej/i2HD5UJsNSCoW6zoK/nfwewma+rqjjMsmG8NNJ
 zwlEk4ee88r97F/DZ65ZlxBXATzJqP0WqOM+idRnrQG6BvyQk2pzoJNuJrtUIJLu
 Jbj1KqMMx+Z4xcvM0ofd/EJCgZWYZE8phGKLOqJAEnOOVuPHdWDtjc6RSQkKx+B1
 Kejo8TQQCvX4r1JIfGcAwXwicur3KYIN2eNQ/9uThCjibJghq6JfSZghVrKRaY2j
 ew4khCqRtDfTfdnssYV+Jd3rU/wfLsk+uwcNQS2idPj2X8wB4Dj0MuCV6GGLFdMx
 3ZlbbjOjnLU5K5lGoxIaHXjedpRkBx+34EaFxUJqeTuv54/Xpj7nZwXv471HWki4
 VM9N8ZlKnnP+OiG3jjPPF5j5c9nEcdlzkER5Af3DIXu3s1K+3EoePXBJexvShhEn
 VEu5ePW0xV2M3xp/4ur7eE8gk3rfLs9gTF9NvIV49g6gpKmngMMfBcejKytbw36B
 9mkWcmKDpxNfWak9jAgz
 =dTnd
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Here is the first set of GPIO fixes for 4.11. It was delayed a bit
  beacuse I was chicken when linux-next was not rotating last week.

  This hits the ST serial driver in drivers/tty/serial and that has an
  ACK from Greg, he suggested to keep the old GPIO fwnode API around to
  smoothen things in the merge Windod and those have now served their
  purpose so we take them out and convert the last driver to the new
  API.

  Apart from that it's fixes as usual.

  Summary:

   - set the parent on the Altera A10SR driver, also fix high level
     IRQs.

   - fix error path on the mockup driver.

   - compilation noise about unused functions fixed.

   - fix missed interrupts on the MCP23S08 expander, this is also tagged
     for stable.

   - retire the interrim helpers devm_get_gpiod_from_child() used to
     smoothen merging in the merge window"

* tag 'gpio-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio:mcp23s08 Fixed missing interrupts
  serial: st-asc: Use new GPIOD API to obtain RTS pin
  gpio: altera: Use handle_level_irq when configured as a level_high
  gpio: xgene: mark PM functions as __maybe_unused
  gpio: mockup: return -EFAULT if copy_from_user() fails
  gpio: altera-a10sr: Set gpio_chip parent property
2017-03-21 13:01:53 -07:00
Linus Torvalds
8a01150840 remoteproc fix for v4.11
This fixes a Kbuild dependency issue related to the Qualcomm remoteproc
 drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJY0E85AAoJEAsfOT8Nma3F5XQQAOLj3RzP5GfmQQ4oxSHEJz3l
 M3ycrTGnUX+zDpzNZ2n3mmsOqbsxCQtas9dch15/9hlwggEm/tu/1CEplhdTenKL
 Lle6TtUZCkZTxU2F7saYu5wZ/YzDh/Ri+/0EWt9NLWJmhd0gu2Z0nEjHkuyNNkJS
 Ey6ZFllzYBD8GAVAP2adUpRDkEk8Ix62HwjzGj8vIMAUQb2vTnRHMbfVLRZ+oRvK
 vi2obfSu+icgmUW1VumpjKaOON9BYYPBddQCCOW7nSGrtr8NcJHjYr4qbSbHKqjL
 c6xqA9Lr2whGgX5zYLtyPoxoUg3ITCt78uDPKZ1KXka4PX0PbrukGWXwyC0uh88m
 lfP+sZjrfSMWW62+uNUdSAOJQwjnGK6C8GdTRYr1mRJRu4uYSifeX5J1Qh5fXQsp
 8AqeY3XQ3O1+HcUZleUnpyUsa7YFN+OoA/c1c0BJ8eNHbE5OR0xVrR8M7fF271Jx
 AJ0Yir9LkPmJ+DWAo+jt5PxWfrVPyMMgVav513Slf80r6icuH/EARIi33oiJF8O7
 /EwkYGqvhSO29anemETCVkRvzYBLq31GxsSbj265ZxXzdmwmjudboNMKNpzNR5hm
 op6tmahYIOWbfZufxODjSrNu7fevxDSwglH0p3gZuSh/Tmo0IGSn3wWIP1TR0gGf
 4umPWnThEX1lbj4F1Yw0
 =f1Jo
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v4.11-fixes' of git://github.com/andersson/remoteproc

Pull remoteproc fix from Bjorn Andersson:
 "This fixes a Kbuild dependency issue related to the Qualcomm
  remoteproc drivers"

* tag 'rproc-v4.11-fixes' of git://github.com/andersson/remoteproc:
  remoteproc: qcom: fix QCOM_SMD dependencies
2017-03-21 12:54:12 -07:00
Linus Torvalds
689b957baf Bug fix for f2fs
- Fix performance regression reported by lkp-rebot
 - Fix potential data lost after power-cut due to SSR reallocation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYz+RvAAoJEEAUqH6CSFDSbr4QAIH3MddDbufG+2+KJKUwk066
 ARL7DScp/h0hwgURF7ohqu7DOCYpHwfggXw6zttyOVBa3rQhYHik/g5ZXSTVsVex
 LC1wiQijJG9ePHShroX6QyFX8g9MYdKj4shbnwdJp1tR2e/iBQEGCg/Ce1umrVJU
 IOSOW3v329/t8n0LzP0LKXl6ZnxDM1DPAklBZBiUbVEThZr8mqnKfMoioPweo7XT
 ESDQI8kNbX6JQfpQhEXqIwgD68/HGJ6+/A523HG92qqlvSNarhb6bT3xPuDIjisQ
 vmlwGdsIitqX/62u+r1wepHN25mcbhWXxIiSC2PqYQqCC2wElUkx/aalvoGZFdCO
 0diSmPCBRK/HKLiVhbhNBRRQTfIG7/ODtmmzoEkYhwleJHBozqhUrQIh/NlSC1Qr
 eiAgshabREaMeU0wzCbulpTVepheXuNpnTbzfvVXtZWGO54OfYm/v4oJ2JDaCcMA
 S2FuGpTETwQGMgI/pQ+8egpVoozGWYxTJciER4RnlolczVEh7i2WA+8jdA/53SOU
 yMhjNUJWjxSFnU++g2Q35QD4VKGGfT0UVP2P6+oQiXo88wOHZZq0WZpaXRBCvQip
 2ZQYSNGF2W/p2U7DN3yjt73xg0xglDPQf8I0Zo5Lfb59mI+yy8lKYYrRo2lso9EW
 9FpzksElm9ZbwMiAHE6r
 =PiUP
 -----END PGP SIGNATURE-----

Merge tag 'for-f2fs-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs fixes from Jaegeuk Kim:

 - fix performance regression reported by lkp-rebot

 - fix potential data lost after power-cut due to SSR reallocation

* tag 'for-f2fs-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: combine nat_bits and free_nid_bitmap cache
  f2fs: skip scanning free nid bitmap of full NAT blocks
  f2fs: use __set{__clear}_bit_le
  f2fs: declare static functions
  f2fs: don't overwrite node block by SSR
2017-03-21 12:27:06 -07:00
Ping Cheng
6e5364f5f4 HID: wacom: generic: Wacom mouse is only provided for opaque tablets
Commit f85c9dc ("Support tool ID and additional tool types") introduced mouse
and lens cursor tools to generic codepath, which covers both display (direct)
and opaque tablets (indirect devices). However, mouse and lens cursor tools are
only provided for opaque tablets. This patch ignores mouse and lens cursor tools
if the device is a display tablet.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21 14:48:29 +01:00
Oscar Campos
01adc47e88 HID: corsair: Add driver Scimitar Pro RGB gaming mouse 1b1c:1b3e support to hid-corsair
This mouse sold by Corsair as Scimitar PRO RGB defines two consecutive
Logical Minimum items in its Application (Consumer.0001) report making
it non parseable. This patch fixes the report descriptor overriding
byte 77 in rdesc from 0x16 (Logical Minimum with 16 bits value) to 0x26
(Logical Maximum with 16 bits value).

Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21 14:46:15 +01:00
Oscar Campos
deaba63699 HID: corsair: support for K65-K70 Rapidfire and Scimitar Pro RGB
Add quirks for several corsair gaming devices to avoid long delays on
report initialization

Supported devices:

 - Corsair K65RGB Rapidfire Gaming Keyboard
 - Corsair K70RGB Rapidfire Gaming Keyboard
 - Corsair Scimitar Pro RGB Gaming Mouse

Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21 14:46:15 +01:00
Aaron Armstrong Skomra
b6b1f19b06 HID: wacom: don't manually release resources for the EKR
Commit 5b779fc introduces the manual release of resources in wacom_remove() as
an addition to the driver's use of devm.  The EKR resources can only be
released through wacom_remote_destroy_one() so we skip the manual release for
it.

Fixes: 5b779fc ("HID: wacom: release the resources before leaving despite devm")
Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21 14:44:37 +01:00
Aaron Armstrong Skomra
49cc4c217c HID: wacom: Correct Intuos Pro 2 resolution
The features struct for the second gen Intuos Pro uses the wrong constant for
the resolution. This fix is for commit 4922cd2.

Fixes: 4922cd2 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-21 14:44:37 +01:00
Arnd Bergmann
c3104aae5d remoteproc: qcom: fix QCOM_SMD dependencies
qcom_smd_register_edge() is provided by either QCOM_SMD or RPMSG_QCOM_SMD,
and if both of them are disabled, it does nothing.

The check for the PIL drivers however only checks for QCOM_SMD, so it breaks
with QCOM_SMD=n && RPMSG_QCOM_SMD=m:

drivers/remoteproc/built-in.o: In function `smd_subdev_remove':
qcom_wcnss_iris.c:(.text+0x231c): undefined reference to `qcom_smd_unregister_edge'
drivers/remoteproc/built-in.o: In function `smd_subdev_probe':
qcom_wcnss_iris.c:(.text+0x2344): undefined reference to `qcom_smd_register_edge'
drivers/remoteproc/built-in.o: In function `smd_subdev_probe':
qcom_q6v5_pil.c:(.text+0x3538): undefined reference to `qcom_smd_register_edge'
qcom_q6v5_pil.c:(.text+0x3538): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_smd_register_edge'

This clarifies the Kconfig dependency.

Fixes: 4b48921a8f ("remoteproc: qcom: Use common SMD edge handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-03-20 14:45:44 -07:00
Chao Yu
7041d5d286 f2fs: combine nat_bits and free_nid_bitmap cache
Both nat_bits cache and free_nid_bitmap cache provide same functionality
as a intermediate cache between free nid cache and disk, but with
different granularity of indicating free nid range, and different
persistence policy. nat_bits cache provides better persistence ability,
and free_nid_bitmap provides better granularity.

In this patch we combine advantage of both caches, so finally policy of
the intermediate cache would be:
- init: load free nid status from nat_bits into free_nid_bitmap
- lookup: scan free_nid_bitmap before load NAT blocks
- update: update free_nid_bitmap in real-time
- persistence: udpate and persist nat_bits in checkpoint

This patch also resolves performance regression reported by lkp-robot.

commit:
  4ac912427c ("f2fs: introduce free nid bitmap")
  d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le")
  1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache")

4ac912427c d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15
---------------- -------------------------- --------------------------
         %stddev     %change         %stddev     %change         %stddev
             \          |                \          |                \
     77863 ±  0%      +2.1%      79485 ±  1%     +50.8%     117404 ±  0%  aim7.jobs-per-min
    231.63 ±  0%      -2.0%     227.01 ±  1%     -33.6%     153.80 ±  0%  aim7.time.elapsed_time
    231.63 ±  0%      -2.0%     227.01 ±  1%     -33.6%     153.80 ±  0%  aim7.time.elapsed_time.max
    896604 ±  0%      -0.8%     889221 ±  3%     -20.2%     715260 ±  1%  aim7.time.involuntary_context_switches
      2394 ±  1%      +4.6%       2503 ±  1%      +3.7%       2481 ±  2%  aim7.time.maximum_resident_set_size
      6240 ±  0%      -1.5%       6145 ±  1%     -14.1%       5360 ±  1%  aim7.time.system_time
   1111357 ±  3%      +1.9%    1132509 ±  2%      -6.2%    1041932 ±  2%  aim7.time.voluntary_context_switches
...

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-20 10:00:18 -04:00
Chao Yu
586d1492f3 f2fs: skip scanning free nid bitmap of full NAT blocks
This patch adds to account free nids for each NAT blocks, and while
scanning all free nid bitmap, do check count and skip lookuping in
full NAT block.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-20 10:00:17 -04:00