AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-25 17:55:10 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
933,763 Commits 1 Branch 0 Tags 2 GiB
65951a9eb6
Commit Graph

349 Commits

Author SHA1 Message Date
Johannes Weiner
7cf111bc39 mm: vmscan: determine anon/file pressure balance at the reclaim root 
We split the LRU lists into anon and file, and we rebalance the scan
pressure between them when one of them begins thrashing: if the file cache
experiences workingset refaults, we increase the pressure on anonymous
pages; if the workload is stalled on swapins, we increase the pressure on
the file cache instead.

With cgroups and their nested LRU lists, we currently don't do this
correctly.  While recursive cgroup reclaim establishes a relative LRU
order among the pages of all involved cgroups, LRU pressure balancing is
done on an individual cgroup LRU level.  As a result, when one cgroup is
thrashing on the filesystem cache while a sibling may have cold anonymous
pages, pressure doesn't get equalized between them.

This patch moves LRU balancing decision to the root of reclaim - the same
level where the LRU order is established.

It does this by tracking LRU cost recursively, so that every level of the
cgroup tree knows the aggregate LRU cost of all memory within its domain.
When the page scanner calculates the scan balance for any given individual
cgroup's LRU list, it uses the values from the ancestor cgroup that
initiated the reclaim cycle.

If one sibling is then thrashing on the cache, it will tip the pressure
balance inside its ancestors, and the next hierarchical reclaim iteration
will go more after the anon pages in the tree.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-13-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:49 -07:00
Johannes Weiner
d9eb1ea2bf mm: memcontrol: delete unused lrucare handling 
Swapin faults were the last event to charge pages after they had already
been put on the LRU list.  Now that we charge directly on swapin, the
lrucare portion of the charge code is unused.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-19-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:48 -07:00
Johannes Weiner
eccb52e788 mm: memcontrol: prepare swap controller setup for integration 
A few cleanups to streamline the swap controller setup:

- Replace the do_swap_account flag with cgroup_memory_noswap. This
  brings it in line with other functionality that is usually available
  unless explicitly opted out of - nosocket, nokmem.

- Remove the really_do_swap_account flag that stores the boot option
  and is later used to switch the do_swap_account. It's not clear why
  this indirection is/was necessary. Use do_swap_account directly.

- Minor coding style polishing

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-15-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:48 -07:00
Johannes Weiner
f0e45fb4da mm: memcontrol: drop unused try/commit/cancel charge API 
There are no more users. RIP in peace.

[arnd@arndb.de: fix an unused-function warning]
  Link: http://lkml.kernel.org/r/20200528095640.151454-1-arnd@arndb.de
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-14-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:48 -07:00
Johannes Weiner
468c398233 mm: memcontrol: switch to native NR_ANON_THPS counter 
With rmap memcg locking already in place for NR_ANON_MAPPED, it's just a
small step to remove the MEMCG_RSS_HUGE wart and switch memcg to the
native NR_ANON_THPS accounting sites.

[hannes@cmpxchg.org: fixes]
  Link: http://lkml.kernel.org/r/20200512121750.GA397968@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>	[build-tested]
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-12-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:47 -07:00
Johannes Weiner
be5d0a74c6 mm: memcontrol: switch to native NR_ANON_MAPPED counter 
Memcg maintains a private MEMCG_RSS counter.  This divergence from the
generic VM accounting means unnecessary code overhead, and creates a
dependency for memcg that page->mapping is set up at the time of charging,
so that page types can be told apart.

Convert the generic accounting sites to mod_lruvec_page_state and friends
to maintain the per-cgroup vmstat counter of NR_ANON_MAPPED.  We use
lock_page_memcg() to stabilize page->mem_cgroup during rmap changes, the
same way we do for NR_FILE_MAPPED.

With the previous patch removing MEMCG_CACHE and the private NR_SHMEM
counter, this patch finally eliminates the need to have page->mapping set
up at charge time.  However, we need to have page->mem_cgroup set up by
the time rmap runs and does the accounting, so switch the commit and the
rmap callbacks around.

v2: fix temporary accounting bug by switching rmap<->commit (Joonsoo)

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-11-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:47 -07:00
Johannes Weiner
0d1c20722a mm: memcontrol: switch to native NR_FILE_PAGES and NR_SHMEM counters 
Memcg maintains private MEMCG_CACHE and NR_SHMEM counters.  This
divergence from the generic VM accounting means unnecessary code overhead,
and creates a dependency for memcg that page->mapping is set up at the
time of charging, so that page types can be told apart.

Convert the generic accounting sites to mod_lruvec_page_state and friends
to maintain the per-cgroup vmstat counters of NR_FILE_PAGES and NR_SHMEM.
The page is already locked in these places, so page->mem_cgroup is stable;
we only need minimal tweaks of two mem_cgroup_migrate() calls to ensure
it's set up in time.

Then replace MEMCG_CACHE with NR_FILE_PAGES and delete the private
NR_SHMEM accounting sites.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-10-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:47 -07:00
Johannes Weiner
9da7b52168 mm: memcontrol: prepare cgroup vmstat infrastructure for native anon counters 
Anonymous compound pages can be mapped by ptes, which means that if we
want to track NR_MAPPED_ANON, NR_ANON_THPS on a per-cgroup basis, we have
to be prepared to see tail pages in our accounting functions.

Make mod_lruvec_page_state() and lock_page_memcg() deal with tail pages
correctly, namely by redirecting to the head page which has the
page->mem_cgroup set up.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-9-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:47 -07:00
Johannes Weiner
3fea5a499d mm: memcontrol: convert page cache to a new mem_cgroup_charge() API 
The try/commit/cancel protocol that memcg uses dates back to when pages
used to be uncharged upon removal from the page cache, and thus couldn't
be committed before the insertion had succeeded.  Nowadays, pages are
uncharged when they are physically freed; it doesn't matter whether the
insertion was successful or not.  For the page cache, the transaction
dance has become unnecessary.

Introduce a mem_cgroup_charge() function that simply charges a newly
allocated page to a cgroup and sets up page->mem_cgroup in one single
step.  If the insertion fails, the caller doesn't have to do anything but
free/put the page.

Then switch the page cache over to this new API.

Subsequent patches will also convert anon pages, but it needs a bit more
prep work.  Right now, memcg depends on page->mapping being already set up
at the time of charging, so that it can maintain its own MEMCG_CACHE and
MEMCG_RSS counters.  For anon, page->mapping is set under the same pte
lock under which the page is publishd, so a single charge point that can
block doesn't work there just yet.

The following prep patches will replace the private memcg counters with
the generic vmstat counters, thus removing the page->mapping dependency,
then complete the transition to the new single-point charge API and delete
the old transactional scheme.

v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo)
v3: rebase on preceeding shmem simplification patch

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:47 -07:00
Johannes Weiner
3fba69a56e mm: memcontrol: drop @compound parameter from memcg charging API 
The memcg charging API carries a boolean @compound parameter that tells
whether the page we're dealing with is a hugepage.
mem_cgroup_commit_charge() has another boolean @lrucare that indicates
whether the page needs LRU locking or not while charging.  The majority of
callsites know those parameters at compile time, which results in a lot of
naked "false, false" argument lists.  This makes for cryptic code and is a
breeding ground for subtle mistakes.

Thankfully, the huge page state can be inferred from the page itself and
doesn't need to be passed along.  This is safe because charging completes
before the page is published and somebody may split it.

Simplify the callsites by removing @compound, and let memcg infer the
state by using hpage_nr_pages() unconditionally.  That function does
PageTransHuge() to identify huge pages, which also helpfully asserts that
nobody passes in tail pages by accident.

The following patches will introduce a new charging API, best not to carry
over unnecessary weight.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-4-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-03 20:09:47 -07:00
Jakub Kicinski
4b82ab4f28 mm/memcg: automatically penalize tasks with high swap use 
Add a memory.swap.high knob, which can be used to protect the system
from SWAP exhaustion.  The mechanism used for penalizing is similar to
memory.high penalty (sleep on return to user space).

That is not to say that the knob itself is equivalent to memory.high.
The objective is more to protect the system from potentially buggy tasks
consuming a lot of swap and impacting other tasks, or even bringing the
whole system to stand still with complete SWAP exhaustion.  Hopefully
without the need to find per-task hard limits.

Slowing misbehaving tasks down gradually allows user space oom killers
or other protection mechanisms to react.  oomd and earlyoom already do
killing based on swap exhaustion, and memory.swap.high protection will
help implement such userspace oom policies more reliably.

We can use one counter for number of pages allocated under pressure to
save struct task space and avoid two separate hierarchy walks on the hot
path.  The exact overage is calculated on return to user space, anyway.

Take the new high limit into account when determining if swap is "full".
Borrowing the explanation from Johannes:

  The idea behind "swap full" is that as long as the workload has plenty
  of swap space available and it's not changing its memory contents, it
  makes sense to generously hold on to copies of data in the swap device,
  even after the swapin.  A later reclaim cycle can drop the page without
  any IO.  Trading disk space for IO.

  But the only two ways to reclaim a swap slot is when they're faulted
  in and the references go away, or by scanning the virtual address space
  like swapoff does - which is very expensive (one could argue it's too
  expensive even for swapoff, it's often more practical to just reboot).

  So at some point in the fill level, we have to start freeing up swap
  slots on fault/swapin.  Otherwise we could eventually run out of swap
  slots while they're filled with copies of data that is also in RAM.

  We don't want to OOM a workload because its available swap space is
  filled with redundant cache.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Chris Down <chris@chrisdown.name>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200527195846.102707-5-kuba@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-02 10:59:09 -07:00
Jakub Kicinski
d1663a907b mm/memcg: move cgroup high memory limit setting into struct page_counter 
High memory limit is currently recorded directly in struct mem_cgroup.
We are about to add a high limit for swap, move the field to struct
page_counter and add some helpers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Chris Down <chris@chrisdown.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200527195846.102707-4-kuba@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-02 10:59:09 -07:00
Yafang Shao
04fd61a4e0 mm, memcg: fix inconsistent oom event behavior 
A recent commit 9852ae3fe5 ("mm, memcg: consider subtrees in
memory.events") changed the behavior of memcg events, which will now
consider subtrees in memory.events.

But oom_kill event is a special one as it is used in both cgroup1 and
cgroup2.  In cgroup1, it is displayed in memory.oom_control.  The file
memory.oom_control is in both root memcg and non root memcg, that is
different with memory.event as it only in non-root memcg.  That commit
is okay for cgroup2, but it is not okay for cgroup1 as it will cause
inconsistent behavior between root memcg and non-root memcg.

Here's an example on why this behavior is inconsistent in cgroup1.

       root memcg
       /
    memcg foo
     /
  memcg bar

Suppose there's an oom_kill in memcg bar, then the oon_kill will be

       root memcg : memory.oom_control(oom_kill)  0
       /
    memcg foo : memory.oom_control(oom_kill)  1
     /
  memcg bar : memory.oom_control(oom_kill)  1

For the non-root memcg, its memory.oom_control(oom_kill) includes its
descendants' oom_kill, but for root memcg, it doesn't include its
descendants' oom_kill.  That means, memory.oom_control(oom_kill) has
different meanings in different memcgs.  That is inconsistent.  Then the
user has to know whether the memcg is root or not.

If we can't fully support it in cgroup1, for example by adding
memory.events.local into cgroup1 as well, then let's don't touch its
original behavior.

Fixes: 9852ae3fe5 ("mm, memcg: consider subtrees in memory.events")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-05-14 10:00:35 -07:00
Gustavo A. R. Silva
307ed94c37 memcontrol.h: Replace zero-length array with flexible-array member 
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
 2020-04-18 15:44:55 -05:00
Roman Gushchin
4b13f64de2 mm: kmem: rename (__)memcg_kmem_(un)charge_memcg() to __memcg_kmem_(un)charge() 
Drop the _memcg suffix from (__)memcg_kmem_(un)charge functions.  It's
shorter and more obvious.

These are the most basic functions which are just (un)charging the given
cgroup with the given amount of pages.

Also fix up the corresponding comments.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-7-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-02 09:35:28 -07:00
Roman Gushchin
92d0510c35 mm: kmem: switch to nr_pages in (__)memcg_kmem_charge_memcg() 
These functions are charging the given number of kernel pages to the given
memory cgroup.  The number doesn't have to be a power of two.  Let's make
them to take the unsigned int nr_pages as an argument instead of the page
order.

It makes them look consistent with the corresponding uncharge functions
and functions like: mem_cgroup_charge_skmem(memcg, nr_pages).

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-5-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-02 09:35:28 -07:00
Roman Gushchin
f4b00eab50 mm: kmem: rename memcg_kmem_(un)charge() into memcg_kmem_(un)charge_page() 
Rename (__)memcg_kmem_(un)charge() into (__)memcg_kmem_(un)charge_page()
to better reflect what they are actually doing:

1) call __memcg_kmem_(un)charge_memcg() to actually charge or uncharge
   the current memcg

2) set or clear the PageKmemcg flag

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-02 09:35:28 -07:00
Roman Gushchin
50591183fa mm: kmem: cleanup memcg_kmem_uncharge_memcg() arguments 
Drop the unused page argument and put the memcg pointer at the first
place.  This make the function consistent with its peers:
__memcg_kmem_uncharge_memcg(), memcg_kmem_charge_memcg(), etc.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-02 09:35:28 -07:00
Roman Gushchin
10eaec2f63 mm: kmem: cleanup (__)memcg_kmem_charge_memcg() arguments 
Patch series "mm: memcg: kmem API cleanup", v2.

This patchset aims to clean up the kernel memory charging API.  It doesn't
bring any functional changes, just removes unused arguments, renames some
functions and fixes some comments.

Currently it's not obvious which functions are most basic
(memcg_kmem_(un)charge_memcg()) and which are based on them
(memcg_kmem_(un)charge()).  The patchset renames these functions and
removes unused arguments:

TL;DR:
was:
  memcg_kmem_charge_memcg(page, gfp, order, memcg)
  memcg_kmem_uncharge_memcg(memcg, nr_pages)
  memcg_kmem_charge(page, gfp, order)
  memcg_kmem_uncharge(page, order)

now:
  memcg_kmem_charge(memcg, gfp, nr_pages)
  memcg_kmem_uncharge(memcg, nr_pages)
  memcg_kmem_charge_page(page, gfp, order)
  memcg_kmem_uncharge_page(page, order)

This patch (of 6):

The first argument of memcg_kmem_charge_memcg() and
__memcg_kmem_charge_memcg() is the page pointer and it's not used.  Let's
drop it.

Memcg pointer is passed as the last argument.  Move it to the first place
for consistency with other memcg functions, e.g.
__memcg_kmem_uncharge_memcg() or try_charge().

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-02 09:35:28 -07:00
Roman Gushchin
8380ce4790 mm: fork: fix kernel_stack memcg stats for various stack implementations 
Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the
space for task stacks can be allocated using __vmalloc_node_range(),
alloc_pages_node() and kmem_cache_alloc_node().

In the first and the second cases page->mem_cgroup pointer is set, but
in the third it's not: memcg membership of a slab page should be
determined using the memcg_from_slab_page() function, which looks at
page->slab_cache->memcg_params.memcg .  In this case, using
mod_memcg_page_state() (as in account_kernel_stack()) is incorrect:
page->mem_cgroup pointer is NULL even for pages charged to a non-root
memory cgroup.

It can lead to kernel_stack per-memcg counters permanently showing 0 on
some architectures (depending on the configuration).

In order to fix it, let's introduce a mod_memcg_obj_state() helper,
which takes a pointer to a kernel object as a first argument, uses
mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls
mod_memcg_state().  It allows to handle all possible configurations
(CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without
spilling any memcg/kmem specifics into fork.c .

Note: This is a special version of the patch created for stable
backports.  It contains code from the following two patches:
  - mm: memcg/slab: introduce mem_cgroup_from_obj()
  - mm: fork: fix kernel_stack memcg stats for various stack implementations

[guro@fb.com: introduce mem_cgroup_from_obj()]
  Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com
Fixes: 4d96ba3530 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-03-29 09:47:05 -07:00
Johannes Weiner
b910718a94 mm: vmscan: detect file thrashing at the reclaim root 
We use refault information to determine whether the cache workingset is
stable or transitioning, and dynamically adjust the inactive:active file
LRU ratio so as to maximize protection from one-off cache during stable
periods, and minimize IO during transitions.

With cgroups and their nested LRU lists, we currently don't do this
correctly.  While recursive cgroup reclaim establishes a relative LRU
order among the pages of all involved cgroups, refaults only affect the
local LRU order in the cgroup in which they are occuring.  As a result,
cache transitions can take longer in a cgrouped system as the active pages
of sibling cgroups aren't challenged when they should be.

[ Right now, this is somewhat theoretical, because the siblings, under
  continued regular reclaim pressure, should eventually run out of
  inactive pages - and since inactive:active *size* balancing is also
  done on a cgroup-local level, we will challenge the active pages
  eventually in most cases. But the next patch will move that relative
  size enforcement to the reclaim root as well, and then this patch
  here will be necessary to propagate refault pressure to siblings. ]

This patch moves refault detection to the root of reclaim.  Instead of
remembering the cgroup owner of an evicted page, remember the cgroup that
caused the reclaim to happen.  When refaults later occur, they'll
correctly influence the cross-cgroup LRU order that reclaim follows.

I.e.  if global reclaim kicked out pages in some subgroup A/B/C, the
refault of those pages will challenge the global LRU order, and not just
the local order down inside C.

[hannes@cmpxchg.org:  use page_memcg() instead of another lookup]
  Link: http://lkml.kernel.org/r/20191115160722.GA309754@cmpxchg.org
Link: http://lkml.kernel.org/r/20191107205334.158354-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-12-01 12:59:07 -08:00
Johannes Weiner
1b05117df7 mm: vmscan: harmonize writeback congestion tracking for nodes & memcgs 
The current writeback congestion tracking has separate flags for kswapd
reclaim (node level) and cgroup limit reclaim (memcg-node level).  This is
unnecessarily complicated: the lruvec is an existing abstraction layer for
that node-memcg intersection.

Introduce lruvec->flags and LRUVEC_CONGESTED.  Then track that at the
reclaim root level, which is either the NUMA node for global reclaim, or
the cgroup-node intersection for cgroup reclaim.

Link: http://lkml.kernel.org/r/20191022144803.302233-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-12-01 12:59:07 -08:00
Johannes Weiner
867e5e1de1 mm: clean up and clarify lruvec lookup procedure 
There is a per-memcg lruvec and a NUMA node lruvec.  Which one is being
used is somewhat confusing right now, and it's easy to make mistakes -
especially when it comes to global reclaim.

How it works: when memory cgroups are enabled, we always use the
root_mem_cgroup's per-node lruvecs.  When memory cgroups are not compiled
in or disabled at runtime, we use pgdat->lruvec.

Document that in a comment.

Due to the way the reclaim code is generalized, all lookups use the
mem_cgroup_lruvec() helper function, and nobody should have to find the
right lruvec manually right now.  But to avoid future mistakes, rename the
pgdat->lruvec member to pgdat->__lruvec and delete the convenience wrapper
that suggests it's a commonly accessed member.

While in this area, swap the mem_cgroup_lruvec() argument order.  The name
suggests a memcg operation, yet it takes a pgdat first and a memcg second.
I have to double take every time I call this.  Fix that.

Link: http://lkml.kernel.org/r/20191022144803.302233-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-12-01 12:59:06 -08:00
Shakeel Butt
fa40d1ee9f mm: vmscan: memcontrol: remove mem_cgroup_select_victim_node() 
Since commit 1ba6fc9af3 ("mm: vmscan: do not share cgroup iteration
between reclaimers"), the memcg reclaim does not bail out earlier based
on sc->nr_reclaimed and will traverse all the nodes.  All the
reclaimable pages of the memcg on all the nodes will be scanned relative
to the reclaim priority.  So, there is no need to maintain state
regarding which node to start the memcg reclaim from.

This patch effectively reverts the commit 889976dbcb ("memcg: reclaim
memory from nodes in round-robin order") and commit 453a9bf347
("memcg: fix numa scan information update to be triggered by memory
event").

[shakeelb@google.com: v2]
  Link: http://lkml.kernel.org/r/20191030204232.139424-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20191029234753.224143-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-12-01 06:29:18 -08:00
Hao Lee
242c37b459 include/linux/memcontrol.h: fix comments based on per-node memcg 
These comments should be updated as memcg limit enforcement has been
moved from zones to nodes.

Link: http://lkml.kernel.org/r/20191022150618.GA15519@haolee.github.io
Signed-off-by: Hao Lee <haolee.swjtu@gmail.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-12-01 06:29:18 -08:00
Yafang Shao
9da83f3fc7 mm, memcg: clean up reclaim iter array 
The mem_cgroup_reclaim_cookie is only used in memcg softlimit reclaim now,
and the priority of the reclaim is always 0.  We don't need to define the
iter in struct mem_cgroup_per_node as an array any more.  That could make
the code more clear and save some space.

Link: http://lkml.kernel.org/r/1569897728-1686-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-12-01 06:29:18 -08:00
Chris Down
1bc63fb127 mm, memcg: make scan aggression always exclude protection 
This patch is an incremental improvement on the existing
memory.{low,min} relative reclaim work to base its scan pressure
calculations on how much protection is available compared to the current
usage, rather than how much the current usage is over some protection
threshold.

This change doesn't change the experience for the user in the normal
case too much.  One benefit is that it replaces the (somewhat arbitrary)
100% cutoff with an indefinite slope, which makes it easier to ballpark
a memory.low value.

As well as this, the old methodology doesn't quite apply generically to
machines with varying amounts of physical memory.  Let's say we have a
top level cgroup, workload.slice, and another top level cgroup,
system-management.slice.  We want to roughly give 12G to
system-management.slice, so on a 32GB machine we set memory.low to 20GB
in workload.slice, and on a 64GB machine we set memory.low to 52GB.
However, because these are relative amounts to the total machine size,
while the amount of memory we want to generally be willing to yield to
system.slice is absolute (12G), we end up putting more pressure on
system.slice just because we have a larger machine and a larger workload
to fill it, which seems fairly unintuitive.  With this new behaviour, we
don't end up with this unintended side effect.

Previously the way that memory.low protection works is that if you are
50% over a certain baseline, you get 50% of your normal scan pressure.
This is certainly better than the previous cliff-edge behaviour, but it
can be improved even further by always considering memory under the
currently enforced protection threshold to be out of bounds.  This means
that we can set relatively low memory.low thresholds for variable or
bursty workloads while still getting a reasonable level of protection,
whereas with the previous version we may still trivially hit the 100%
clamp.  The previous 100% clamp is also somewhat arbitrary, whereas this
one is more concretely based on the currently enforced protection
threshold, which is likely easier to reason about.

There is also a subtle issue with the way that proportional reclaim
worked previously -- it promotes having no memory.low, since it makes
pressure higher during low reclaim.  This happens because we base our
scan pressure modulation on how far memory.current is between memory.min
and memory.low, but if memory.low is unset, we only use the overage
method.  In most cromulent configurations, this then means that we end
up with *more* pressure than with no memory.low at all when we're in low
reclaim, which is not really very usable or expected.

With this patch, memory.low and memory.min affect reclaim pressure in a
more understandable and composable way.  For example, from a user
standpoint, "protected" memory now remains untouchable from a reclaim
aggression standpoint, and users can also have more confidence that
bursty workloads will still receive some amount of guaranteed
protection.

Link: http://lkml.kernel.org/r/20190322160307.GA3316@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-10-07 15:47:20 -07:00
Chris Down
9de7ca46ad mm, memcg: make memory.emin the baseline for utilisation determination 
Roman points out that when when we do the low reclaim pass, we scale the
reclaim pressure relative to position between 0 and the maximum
protection threshold.

However, if the maximum protection is based on memory.elow, and
memory.emin is above zero, this means we still may get binary behaviour
on second-pass low reclaim.  This is because we scale starting at 0, not
starting at memory.emin, and since we don't scan at all below emin, we
end up with cliff behaviour.

This should be a fairly uncommon case since usually we don't go into the
second pass, but it makes sense to scale our low reclaim pressure
starting at emin.

You can test this by catting two large sparse files, one in a cgroup
with emin set to some moderate size compared to physical RAM, and
another cgroup without any emin.  In both cgroups, set an elow larger
than 50% of physical RAM.  The one with emin will have less page
scanning, as reclaim pressure is lower.

Rebase on top of and apply the same idea as what was applied to handle
cgroup_memory=disable properly for the original proportional patch
http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name ("mm,
memcg: Handle cgroup_disable=memory when getting memcg protection").

Link: http://lkml.kernel.org/r/20190201051810.GA18895@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Suggested-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-10-07 15:47:20 -07:00
Chris Down
9783aa9917 mm, memcg: proportional memory.{low,min} reclaim 
cgroup v2 introduces two memory protection thresholds: memory.low
(best-effort) and memory.min (hard protection).  While they generally do
what they say on the tin, there is a limitation in their implementation
that makes them difficult to use effectively: that cliff behaviour often
manifests when they become eligible for reclaim.  This patch implements
more intuitive and usable behaviour, where we gradually mount more
reclaim pressure as cgroups further and further exceed their protection
thresholds.

This cliff edge behaviour happens because we only choose whether or not
to reclaim based on whether the memcg is within its protection limits
(see the use of mem_cgroup_protected in shrink_node), but we don't vary
our reclaim behaviour based on this information.  Imagine the following
timeline, with the numbers the lruvec size in this zone:

1. memory.low=1000000, memory.current=999999. 0 pages may be scanned.
2. memory.low=1000000, memory.current=1000000. 0 pages may be scanned.
3. memory.low=1000000, memory.current=1000001. 1000001* pages may be
   scanned. (?!)

* Of course, we won't usually scan all available pages in the zone even
  without this patch because of scan control priority, over-reclaim
  protection, etc.  However, as shown by the tests at the end, these
  techniques don't sufficiently throttle such an extreme change in input,
  so cliff-like behaviour isn't really averted by their existence alone.

Here's an example of how this plays out in practice.  At Facebook, we are
trying to protect various workloads from "system" software, like
configuration management tools, metric collectors, etc (see this[0] case
study).  In order to find a suitable memory.low value, we start by
determining the expected memory range within which the workload will be
comfortable operating.  This isn't an exact science -- memory usage deemed
"comfortable" will vary over time due to user behaviour, differences in
composition of work, etc, etc.  As such we need to ballpark memory.low,
but doing this is currently problematic:

1. If we end up setting it too low for the workload, it won't have
   *any* effect (see discussion above).  The group will receive the full
   weight of reclaim and won't have any priority while competing with the
   less important system software, as if we had no memory.low configured
   at all.

2. Because of this behaviour, we end up erring on the side of setting
   it too high, such that the comfort range is reliably covered.  However,
   protected memory is completely unavailable to the rest of the system,
   so we might cause undue memory and IO pressure there when we *know* we
   have some elasticity in the workload.

3. Even if we get the value totally right, smack in the middle of the
   comfort zone, we get extreme jumps between no pressure and full
   pressure that cause unpredictable pressure spikes in the workload due
   to the current binary reclaim behaviour.

With this patch, we can set it to our ballpark estimation without too much
worry.  Any undesirable behaviour, such as too much or too little reclaim
pressure on the workload or system will be proportional to how far our
estimation is off.  This means we can set memory.low much more
conservatively and thus waste less resources *without* the risk of the
workload falling off a cliff if we overshoot.

As a more abstract technical description, this unintuitive behaviour
results in having to give high-priority workloads a large protection
buffer on top of their expected usage to function reliably, as otherwise
we have abrupt periods of dramatically increased memory pressure which
hamper performance.  Having to set these thresholds so high wastes
resources and generally works against the principle of work conservation.
In addition, having proportional memory reclaim behaviour has other
benefits.  Most notably, before this patch it's basically mandatory to set
memory.low to a higher than desirable value because otherwise as soon as
you exceed memory.low, all protection is lost, and all pages are eligible
to scan again.  By contrast, having a gradual ramp in reclaim pressure
means that you now still get some protection when thresholds are exceeded,
which means that one can now be more comfortable setting memory.low to
lower values without worrying that all protection will be lost.  This is
important because workingset size is really hard to know exactly,
especially with variable workloads, so at least getting *some* protection
if your workingset size grows larger than you expect increases user
confidence in setting memory.low without a huge buffer on top being
needed.

Thanks a lot to Johannes Weiner and Tejun Heo for their advice and
assistance in thinking about how to make this work better.

In testing these changes, I intended to verify that:

1. Changes in page scanning become gradual and proportional instead of
   binary.

   To test this, I experimented stepping further and further down
   memory.low protection on a workload that floats around 19G workingset
   when under memory.low protection, watching page scan rates for the
   workload cgroup:

   +------------+-----------------+--------------------+--------------+
   | memory.low | test (pgscan/s) | control (pgscan/s) | % of control |
   +------------+-----------------+--------------------+--------------+
   |        21G |               0 |                  0 | N/A          |
   |        17G |             867 |               3799 | 23%          |
   |        12G |            1203 |               3543 | 34%          |
   |         8G |            2534 |               3979 | 64%          |
   |         4G |            3980 |               4147 | 96%          |
   |          0 |            3799 |               3980 | 95%          |
   +------------+-----------------+--------------------+--------------+

   As you can see, the test kernel (with a kernel containing this
   patch) ramps up page scanning significantly more gradually than the
   control kernel (without this patch).

2. More gradual ramp up in reclaim aggression doesn't result in
   premature OOMs.

   To test this, I wrote a script that slowly increments the number of
   pages held by stress(1)'s --vm-keep mode until a production system
   entered severe overall memory contention.  This script runs in a highly
   protected slice taking up the majority of available system memory.
   Watching vmstat revealed that page scanning continued essentially
   nominally between test and control, without causing forward reclaim
   progress to become arrested.

[0]: https://facebookmicrosites.github.io/cgroup2/docs/overview.html#case-study-the-fbtax2-project

[akpm@linux-foundation.org: reflow block comments to fit in 80 cols]
[chris@chrisdown.name: handle cgroup_disable=memory when getting memcg protection]
  Link: http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name
Link: http://lkml.kernel.org/r/20190124014455.GA6396@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-10-07 15:47:20 -07:00
Baoquan He
08d1d0e6d0 memcg: only record foreign writebacks with dirty pages when memcg is not disabled 
In kdump kernel, memcg usually is disabled with 'cgroup_disable=memory'
for saving memory.  Now kdump kernel will always panic when dump vmcore
to local disk:

  BUG: kernel NULL pointer dereference, address: 0000000000000ab8
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 598 Comm: makedumpfile Not tainted 5.3.0+ #26
  Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 10/02/2018
  RIP: 0010:mem_cgroup_track_foreign_dirty_slowpath+0x38/0x140
  Call Trace:
   __set_page_dirty+0x52/0xc0
   iomap_set_page_dirty+0x50/0x90
   iomap_write_end+0x6e/0x270
   iomap_write_actor+0xce/0x170
   iomap_apply+0xba/0x11e
   iomap_file_buffered_write+0x62/0x90
   xfs_file_buffered_aio_write+0xca/0x320 [xfs]
   new_sync_write+0x12d/0x1d0
   vfs_write+0xa5/0x1a0
   ksys_write+0x59/0xd0
   do_syscall_64+0x59/0x1e0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

And this will corrupt the 1st kernel too with 'cgroup_disable=memory'.

Via the trace and with debugging, it is pointing to commit 97b27821b4
("writeback, memcg: Implement foreign dirty flushing") which introduced
this regression.  Disabling memcg causes the null pointer dereference at
uninitialized data in function mem_cgroup_track_foreign_dirty_slowpath().

Fix it by returning directly if memcg is disabled, but not trying to
record the foreign writebacks with dirty pages.

Link: http://lkml.kernel.org/r/20190924141928.GD31919@MiWiFi-R3L-srv
Fixes: 97b27821b4 ("writeback, memcg: Implement foreign dirty flushing")
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-10-07 15:47:19 -07:00
Yang Shi
87eaceb3fa mm: thp: make deferred split shrinker memcg aware 
Currently THP deferred split shrinker is not memcg aware, this may cause
premature OOM with some configuration.  For example the below test would
run into premature OOM easily:

$ cgcreate -g memory:thp
$ echo 4G > /sys/fs/cgroup/memory/thp/memory/limit_in_bytes
$ cgexec -g memory:thp transhuge-stress 4000

transhuge-stress comes from kernel selftest.

It is easy to hit OOM, but there are still a lot THP on the deferred split
queue, memcg direct reclaim can't touch them since the deferred split
shrinker is not memcg aware.

Convert deferred split shrinker memcg aware by introducing per memcg
deferred split queue.  The THP should be on either per node or per memcg
deferred split queue if it belongs to a memcg.  When the page is
immigrated to the other memcg, it will be immigrated to the target memcg's
deferred split queue too.

Reuse the second tail page's deferred_list for per memcg list since the
same THP can't be on multiple deferred split queues.

[yang.shi@linux.alibaba.com: simplify deferred split queue dereference per Kirill Tkhai]
  Link: http://lkml.kernel.org/r/1566496227-84952-5-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1565144277-36240-5-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-09-24 15:54:11 -07:00
Yang Shi
0a432dcbeb mm: shrinker: make shrinker not depend on memcg kmem 
Currently shrinker is just allocated and can work when memcg kmem is
enabled.  But, THP deferred split shrinker is not slab shrinker, it
doesn't make too much sense to have such shrinker depend on memcg kmem.
It should be able to reclaim THP even though memcg kmem is disabled.

Introduce a new shrinker flag, SHRINKER_NONSLAB, for non-slab shrinker.
When memcg kmem is disabled, just such shrinkers can be called in
shrinking memcg slab.

[yang.shi@linux.alibaba.com: add comment]
  Link: http://lkml.kernel.org/r/1566496227-84952-4-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1565144277-36240-4-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-09-24 15:54:11 -07:00
Linus Torvalds
7ad67ca553 for-5.4/block-2019-09-16 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl1/no0QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpmo9EACFXMbdNmEEUMyRSdOkVLlr7ZlTyQi1tLpB
 YESDPxdBfybzpi0qa8JSaysGIfvSkSjmSAqBqrWPmASOSOL6CK4bbA4fTYbgPplk
 XeHUdgGiG34oCQUn8Xil5reYaTm7I6LQWnWTpVa5fIhAyUYaGJL+987ykoGmpQmB
 Dvf3YSc+8H0RTp9PCMVd6UCGPkZbVlLImGad3PF5ULvTEaE4RCXC2aiAgh0p1l5A
 J2CkRZ+/mio3zN2O4YN7VdPGfr1Wo1iZ834xbIGLegv1miHXagFk7jwTcC7zIt5t
 oSnJnqIg3iCe7SpWt4Bkzw/zy/2UqaspifbCMgw8vychlViVRUHFO5h85Yboo7kQ
 OMLEQPcwjm6dTHv5h1iXF9LW1O7NoiYmmgvApU9uOo1HUrl1X7PZ3JEfUsVHxkOO
 T4D5igf0Krsl1eAbiwEUQzy7vFZ8PlRHqrHgK+fkyotzHu1BJR7OQkYygEfGFOB/
 EfMxplGDpmibYGuWCwDX2bPAmLV3SPUQENReHrfPJRDt5TD1UkFpVGv/PLLhbr0p
 cLYI78DKpDSigBpVMmwq5nTYpnex33eyDTTA8C0sakcsdzdmU5qv30y3wm4nTiep
 f6gZo6IMXwRg/rCgVVrd9SKQAr/8wEzVlsDW3qyi2pVT8sHIgm0tFv7paihXGdDV
 xsKgmTrQQQ==
 =Qt+h
 -----END PGP SIGNATURE-----

Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...
 2019-09-17 16:57:47 -07:00
Tejun Heo
97b27821b4 writeback, memcg: Implement foreign dirty flushing 
There's an inherent mismatch between memcg and writeback.  The former
trackes ownership per-page while the latter per-inode.  This was a
deliberate design decision because honoring per-page ownership in the
writeback path is complicated, may lead to higher CPU and IO overheads
and deemed unnecessary given that write-sharing an inode across
different cgroups isn't a common use-case.

Combined with inode majority-writer ownership switching, this works
well enough in most cases but there are some pathological cases.  For
example, let's say there are two cgroups A and B which keep writing to
different but confined parts of the same inode.  B owns the inode and
A's memory is limited far below B's.  A's dirty ratio can rise enough
to trigger balance_dirty_pages() sleeps but B's can be low enough to
avoid triggering background writeback.  A will be slowed down without
a way to make writeback of the dirty pages happen.

This patch implements foreign dirty recording and foreign mechanism so
that when a memcg encounters a condition as above it can trigger
flushes on bdi_writebacks which can clean its pages.  Please see the
comment on top of mem_cgroup_track_foreign_dirty_slowpath() for
details.

A reproducer follows.

write-range.c::

  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <fcntl.h>
  #include <sys/types.h>

  static const char *usage = "write-range FILE START SIZE\n";

  int main(int argc, char **argv)
  {
	  int fd;
	  unsigned long start, size, end, pos;
	  char *endp;
	  char buf[4096];

	  if (argc < 4) {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  fd = open(argv[1], O_WRONLY);
	  if (fd < 0) {
		  perror("open");
		  return 1;
	  }

	  start = strtoul(argv[2], &endp, 0);
	  if (*endp != '\0') {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  size = strtoul(argv[3], &endp, 0);
	  if (*endp != '\0') {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  end = start + size;

	  while (1) {
		  for (pos = start; pos < end; ) {
			  long bread, bwritten = 0;

			  if (lseek(fd, pos, SEEK_SET) < 0) {
				  perror("lseek");
				  return 1;
			  }

			  bread = read(0, buf, sizeof(buf) < end - pos ?
					       sizeof(buf) : end - pos);
			  if (bread < 0) {
				  perror("read");
				  return 1;
			  }
			  if (bread == 0)
				  return 0;

			  while (bwritten < bread) {
				  long this;

				  this = write(fd, buf + bwritten,
					       bread - bwritten);
				  if (this < 0) {
					  perror("write");
					  return 1;
				  }

				  bwritten += this;
				  pos += bwritten;
			  }
		  }
	  }
  }

repro.sh::

  #!/bin/bash

  set -e
  set -x

  sysctl -w vm.dirty_expire_centisecs=300000
  sysctl -w vm.dirty_writeback_centisecs=300000
  sysctl -w vm.dirtytime_expire_seconds=300000
  echo 3 > /proc/sys/vm/drop_caches

  TEST=/sys/fs/cgroup/test
  A=$TEST/A
  B=$TEST/B

  mkdir -p $A $B
  echo "+memory +io" > $TEST/cgroup.subtree_control
  echo $((1<<30)) > $A/memory.high
  echo $((32<<30)) > $B/memory.high

  rm -f testfile
  touch testfile
  fallocate -l 4G testfile

  echo "Starting B"

  (echo $BASHPID > $B/cgroup.procs
   pv -q --rate-limit 70M < /dev/urandom | ./write-range testfile $((2<<30)) $((2<<30))) &

  echo "Waiting 10s to ensure B claims the testfile inode"
  sleep 5
  sync
  sleep 5
  sync
  echo "Starting A"

  (echo $BASHPID > $A/cgroup.procs
   pv < /dev/urandom | ./write-range testfile 0 $((2<<30)))

v2: Added comments explaining why the specific intervals are being used.

v3: Use 0 @nr when calling cgroup_writeback_by_id() to use best-effort
    flushing while avoding possible livelocks.

v4: Use get_jiffies_64() and time_before/after64() instead of raw
    jiffies_64 and arthimetic comparisons as suggested by Jan.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2019-08-27 09:22:38 -06:00
Roman Gushchin
ec9f02384f mm: workingset: fix vmstat counters for shadow nodes 
Memcg counters for shadow nodes are broken because the memcg pointer is
obtained in a wrong way. The following approach is used:
        virt_to_page(xa_node)->mem_cgroup

Since commit 4d96ba3530 ("mm: memcg/slab: stop setting
page->mem_cgroup pointer for slab pages") page->mem_cgroup pointer isn't
set for slab pages, so memcg_from_slab_page() should be used instead.

Also I doubt that it ever worked correctly: virt_to_head_page() should
be used instead of virt_to_page().  Otherwise objects residing on tail
pages are not accounted, because only the head page contains a valid
mem_cgroup pointer.  That was a case since the introduction of these
counters by the commit 68d48e6a2d ("mm: workingset: add vmstat counter
for shadow nodes").

Link: http://lkml.kernel.org/r/20190801233532.138743-1-guro@fb.com
Fixes: 4d96ba3530 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-08-13 16:06:52 -07:00
Shakeel Butt
6ba749ee78 mm, oom: remove redundant task_in_mem_cgroup() check 
oom_unkillable_task() can be called from three different contexts i.e.
global OOM, memcg OOM and oom_score procfs interface.  At the moment
oom_unkillable_task() does a task_in_mem_cgroup() check on the given
process.  Since there is no reason to perform task_in_mem_cgroup()
check for global OOM and oom_score procfs interface, those contexts
provide NULL memcg and skips the task_in_mem_cgroup() check.  However
for memcg OOM context, the oom_unkillable_task() is always called from
mem_cgroup_scan_tasks() and thus task_in_mem_cgroup() check becomes
redundant and effectively dead code.  So, just remove the
task_in_mem_cgroup() check altogether.

Link: http://lkml.kernel.org/r/20190624212631.87212-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-07-12 11:05:47 -07:00
Roman Gushchin
49a18eae2e mm: memcg/slab: introduce __memcg_kmem_uncharge_memcg() 
Let's separate the page counter modification code out of
__memcg_kmem_uncharge() in a way similar to what
__memcg_kmem_charge() and __memcg_kmem_charge_memcg() work.

This will allow to reuse this code later using a new
memcg_kmem_uncharge_memcg() wrapper, which calls
__memcg_kmem_uncharge_memcg() if memcg_kmem_enabled()
check is passed.

Link: http://lkml.kernel.org/r/20190611231813.3148843-5-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Waiman Long <longman@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-07-12 11:05:44 -07:00
Shakeel Butt
1e577f970f mm, memcg: introduce memory.events.local 
The memory controller in cgroup v2 exposes memory.events file for each
memcg which shows the number of times events like low, high, max, oom
and oom_kill have happened for the whole tree rooted at that memcg.
Users can also poll or register notification to monitor the changes in
that file.  Any event at any level of the tree rooted at memcg will
notify all the listeners along the path till root_mem_cgroup.  There are
existing users which depend on this behavior.

However there are users which are only interested in the events
happening at a specific level of the memcg tree and not in the events in
the underlying tree rooted at that memcg.  One such use-case is a
centralized resource monitor which can dynamically adjust the limits of
the jobs running on a system.  The jobs can create their sub-hierarchy
for their own sub-tasks.  The centralized monitor is only interested in
the events at the top level memcgs of the jobs as it can then act and
adjust the limits of the jobs.  Using the current memory.events for such
centralized monitor is very inconvenient.  The monitor will keep
receiving events which it is not interested and to find if the received
event is interesting, it has to read memory.event files of the next
level and compare it with the top level one.  So, let's introduce
memory.events.local to the memcg which shows and notify for the events
at the memcg level.

Now, does memory.stat and memory.pressure need their local versions.  IMHO
no due to the no internal process contraint of the cgroup v2.  The
memory.stat file of the top level memcg of a job shows the stats and
vmevents of the whole tree.  The local stats or vmevents of the top level
memcg will only change if there is a process running in that memcg but v2
does not allow that.  Similarly for memory.pressure there will not be any
process in the internal nodes and thus no chance of local pressure.

Link: http://lkml.kernel.org/r/20190527174643.209172-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-07-12 11:05:43 -07:00
Johannes Weiner
815744d751 mm: memcontrol: don't batch updates of local VM stats and events 
The kernel test robot noticed a 26% will-it-scale pagefault regression
from commit 42a3003535 ("mm: memcontrol: fix recursive statistics
correctness & scalabilty").  This appears to be caused by bouncing the
additional cachelines from the new hierarchical statistics counters.

We can fix this by getting rid of the batched local counters instead.

Originally, there were *only* group-local counters, and they were fully
maintained per cpu.  A reader of a stats file high up in the cgroup tree
would have to walk the entire subtree and collect each level's per-cpu
counters to get the recursive view.  This was prohibitively expensive,
and so we switched to per-cpu batched updates of the local counters
during a983b5ebee ("mm: memcontrol: fix excessive complexity in
memory.stat reporting"), reducing the complexity from nr_subgroups *
nr_cpus to nr_subgroups.

With growing machines and cgroup trees, the tree walk itself became too
expensive for monitoring top-level groups, and this is when the culprit
patch added hierarchy counters on each cgroup level.  When the per-cpu
batch size would be reached, both the local and the hierarchy counters
would get batch-updated from the per-cpu delta simultaneously.

This makes local and hierarchical counter reads blazingly fast, but it
unfortunately makes the write-side too cache line intense.

Since local counter reads were never a problem - we only centralized
them to accelerate the hierarchy walk - and use of the local counters
are becoming rarer due to replacement with hierarchical views (ongoing
rework in the page reclaim and workingset code), we can make those local
counters unbatched per-cpu counters again.

The scheme will then be as such:

   when a memcg statistic changes, the writer will:
   - update the local counter (per-cpu)
   - update the batch counter (per-cpu). If the batch is full:
   - spill the batch into the group's atomic_t
   - spill the batch into all ancestors' atomic_ts
   - empty out the batch counter (per-cpu)

   when a local memcg counter is read, the reader will:
   - collect the local counter from all cpus

   when a hiearchy memcg counter is read, the reader will:
   - read the atomic_t

We might be able to simplify this further and make the recursive
counters unbatched per-cpu counters as well (batch upward propagation,
but leave per-cpu collection to the readers), but that will require a
more in-depth analysis and testing of all the callsites.  Deal with the
immediate regression for now.

Link: http://lkml.kernel.org/r/20190521151647.GB2870@cmpxchg.org
Fixes: 42a3003535 ("mm: memcontrol: fix recursive statistics correctness & scalabilty")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Tested-by: kernel test robot <rong.a.chen@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-06-13 17:34:56 -10:00
Chris Down
9852ae3fe5 mm, memcg: consider subtrees in memory.events 
memory.stat and other files already consider subtrees in their output, and
we should too in order to not present an inconsistent interface.

The current situation is fairly confusing, because people interacting with
cgroups expect hierarchical behaviour in the vein of memory.stat,
cgroup.events, and other files.  For example, this causes confusion when
debugging reclaim events under low, as currently these always read "0" at
non-leaf memcg nodes, which frequently causes people to misdiagnose breach
behaviour.  The same confusion applies to other counters in this file when
debugging issues.

Aggregation is done at write time instead of at read-time since these
counters aren't hot (unlike memory.stat which is per-page, so it does it
at read time), and it makes sense to bundle this with the file
notifications.

After this patch, events are propagated up the hierarchy:

    [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events
    low 0
    high 0
    max 0
    oom 0
    oom_kill 0
    [root@ktst ~]# systemd-run -p MemoryMax=1 true
    Running as unit: run-r251162a189fb4562b9dabfdc9b0422f5.service
    [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events
    low 0
    high 0
    max 7
    oom 1
    oom_kill 1

As this is a change in behaviour, this can be reverted to the old
behaviour by mounting with the `memory_localevents' flag set.  However, we
use the new behaviour by default as there's a lack of evidence that there
are any current users of memory.events that would find this change
undesirable.

akpm: this is a behaviour change, so Cc:stable.  THis is so that
forthcoming distros which use cgroup v2 are more likely to pick up the
revised behaviour.

Link: http://lkml.kernel.org/r/20190208224419.GA24772@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-06-01 15:51:31 -07:00
Thomas Gleixner
c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-05-30 11:26:37 -07:00
Johannes Weiner
42a3003535 mm: memcontrol: fix recursive statistics correctness & scalabilty 
Right now, when somebody needs to know the recursive memory statistics
and events of a cgroup subtree, they need to walk the entire subtree and
sum up the counters manually.

There are two issues with this:

1. When a cgroup gets deleted, its stats are lost. The state counters
   should all be 0 at that point, of course, but the events are not.
   When this happens, the event counters, which are supposed to be
   monotonic, can go backwards in the parent cgroups.

2. During regular operation, we always have a certain number of lazily
   freed cgroups sitting around that have been deleted, have no tasks,
   but have a few cache pages remaining. These groups' statistics do not
   change until we eventually hit memory pressure, but somebody
   watching, say, memory.stat on an ancestor has to iterate those every
   time.

This patch addresses both issues by introducing recursive counters at
each level that are propagated from the write side when stats change.

Upward propagation happens when the per-cpu caches spill over into the
local atomic counter.  This is the same thing we do during charge and
uncharge, except that the latter uses atomic RMWs, which are more
expensive; stat changes happen at around the same rate.  In a sparse
file test (page faults and reclaim at maximum CPU speed) with 5 cgroup
nesting levels, perf shows __mod_memcg_page state at ~1%.

Link: http://lkml.kernel.org/r/20190412151507.2769-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-05-14 19:52:53 -07:00
Johannes Weiner
db9adbcbe7 mm: memcontrol: move stat/event counting functions out-of-line 
These are getting too big to be inlined in every callsite.  They were
stolen from vmstat.c, which already out-of-lines them, and they have
only been growing since.  The callsites aren't that hot, either.

Move __mod_memcg_state()
     __mod_lruvec_state() and
     __count_memcg_events() out of line and add kerneldoc comments.

Link: http://lkml.kernel.org/r/20190412151507.2769-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-05-14 19:52:53 -07:00
Johannes Weiner
205b20cc5a mm: memcontrol: make cgroup stats and events query API explicitly local 
Patch series "mm: memcontrol: memory.stat cost & correctness".

The cgroup memory.stat file holds recursive statistics for the entire
subtree.  The current implementation does this tree walk on-demand
whenever the file is read.  This is giving us problems in production.

1. The cost of aggregating the statistics on-demand is high.  A lot of
   system service cgroups are mostly idle and their stats don't change
   between reads, yet we always have to check them.  There are also always
   some lazily-dying cgroups sitting around that are pinned by a handful
   of remaining page cache; the same applies to them.

   In an application that periodically monitors memory.stat in our
   fleet, we have seen the aggregation consume up to 5% CPU time.

2. When cgroups die and disappear from the cgroup tree, so do their
   accumulated vm events.  The result is that the event counters at
   higher-level cgroups can go backwards and confuse some of our
   automation, let alone people looking at the graphs over time.

To address both issues, this patch series changes the stat
implementation to spill counts upwards when the counters change.

The upward spilling is batched using the existing per-cpu cache.  In a
sparse file stress test with 5 level cgroup nesting, the additional cost
of the flushing was negligible (a little under 1% of CPU at 100% CPU
utilization, compared to the 5% of reading memory.stat during regular
operation).

This patch (of 4):

memcg_page_state(), lruvec_page_state(), memcg_sum_events() are
currently returning the state of the local memcg or lruvec, not the
recursive state.

In practice there is a demand for both versions, although the callers
that want the recursive counts currently sum them up by hand.

Per default, cgroups are considered recursive entities and generally we
expect more users of the recursive counters, with the local counts being
special cases.  To reflect that in the name, add a _local suffix to the
current implementations.

The following patch will re-incarnate these functions with recursive
semantics, but with an O(1) implementation.

[hannes@cmpxchg.org: fix bisection hole]
  Link: http://lkml.kernel.org/r/20190417160347.GC23013@cmpxchg.org
Link: http://lkml.kernel.org/r/20190412151507.2769-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-05-14 19:52:53 -07:00
Chris Down
871789d4af mm, memcg: rename ambiguously named memory.stat counters and functions 
I spent literally an hour trying to work out why an earlier version of
my memory.events aggregation code doesn't work properly, only to find
out I was calling memcg->events instead of memcg->memory_events, which
is fairly confusing.

This naming seems in need of reworking, so make it harder to do the
wrong thing by using vmevents instead of events, which makes it more
clear that these are vm counters rather than memcg-specific counters.

There are also a few other inconsistent names in both the percpu and
aggregated structs, so these are all cleaned up to be more coherent and
easy to understand.

This commit contains code cleanup only: there are no logic changes.

[akpm@linux-foundation.org: fix it for preceding changes]
Link: http://lkml.kernel.org/r/20190208224319.GA23801@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-05-14 19:52:52 -07:00
Johannes Weiner
2b487e59f0 mm: memcontrol: push down mem_cgroup_node_nr_lru_pages() 
mem_cgroup_node_nr_lru_pages() is just a convenience wrapper around
lruvec_page_state() that takes bitmasks of lru indexes and aggregates the
counts for those.

Replace callsites where the bitmask is simple enough with direct
lruvec_page_state() calls.

This removes the last extern user of mem_cgroup_node_nr_lru_pages(), so
make that function private again, too.

Link: http://lkml.kernel.org/r/20190228163020.24100-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-05-14 09:47:46 -07:00
Johannes Weiner
1a61ab8038 mm: memcontrol: replace zone summing with lruvec_page_state() 
Instead of adding up the zone counters, use lruvec_page_state() to get the
node state directly.  This is a bit cheaper and more stream-lined.

Link: http://lkml.kernel.org/r/20190228163020.24100-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-05-14 09:47:46 -07:00
Kirill Tkhai
9851ac1359 mm: move nr_deactivate accounting to shrink_active_list() 
We know which LRU is not active.

[chris@chrisdown.name: fix build on !CONFIG_MEMCG]
  Link: http://lkml.kernel.org/r/20190322150513.GA22021@chrisdown.name
Link: http://lkml.kernel.org/r/155290128498.31489.18250485448913338607.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-05-14 09:47:45 -07:00
Greg Thelen
0b3d6e6f2d mm: writeback: use exact memcg dirty counts 
Since commit a983b5ebee ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") memcg dirty and writeback counters are managed
as:

 1) per-memcg per-cpu values in range of [-32..32]

 2) per-memcg atomic counter

When a per-cpu counter cannot fit in [-32..32] it's flushed to the
atomic.  Stat readers only check the atomic.  Thus readers such as
balance_dirty_pages() may see a nontrivial error margin: 32 pages per
cpu.

Assuming 100 cpus:
   4k x86 page_size:  13 MiB error per memcg
  64k ppc page_size: 200 MiB error per memcg

Considering that dirty+writeback are used together for some decisions the
errors double.

This inaccuracy can lead to undeserved oom kills.  One nasty case is
when all per-cpu counters hold positive values offsetting an atomic
negative value (i.e.  per_cpu[*]=32, atomic=n_cpu*-32).
balance_dirty_pages() only consults the atomic and does not consider
throttling the next n_cpu*32 dirty pages.  If the file_lru is in the
13..200 MiB range then there's absolutely no dirty throttling, which
burdens vmscan with only dirty+writeback pages thus resorting to oom
kill.

It could be argued that tiny containers are not supported, but it's more
subtle.  It's the amount the space available for file lru that matters.
If a container has memory.max-200MiB of non reclaimable memory, then it
will also suffer such oom kills on a 100 cpu machine.

The following test reliably ooms without this patch.  This patch avoids
oom kills.

  $ cat test
  mount -t cgroup2 none /dev/cgroup
  cd /dev/cgroup
  echo +io +memory > cgroup.subtree_control
  mkdir test
  cd test
  echo 10M > memory.max
  (echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo)
  (echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100)

  $ cat memcg-writeback-stress.c
  /*
   * Dirty pages from all but one cpu.
   * Clean pages from the non dirtying cpu.
   * This is to stress per cpu counter imbalance.
   * On a 100 cpu machine:
   * - per memcg per cpu dirty count is 32 pages for each of 99 cpus
   * - per memcg atomic is -99*32 pages
   * - thus the complete dirty limit: sum of all counters 0
   * - balance_dirty_pages() only sees atomic count -99*32 pages, which
   *   it max()s to 0.
   * - So a workload can dirty -99*32 pages before balance_dirty_pages()
   *   cares.
   */
  #define _GNU_SOURCE
  #include <err.h>
  #include <fcntl.h>
  #include <sched.h>
  #include <stdlib.h>
  #include <stdio.h>
  #include <sys/stat.h>
  #include <sys/sysinfo.h>
  #include <sys/types.h>
  #include <unistd.h>

  static char *buf;
  static int bufSize;

  static void set_affinity(int cpu)
  {
  	cpu_set_t affinity;

  	CPU_ZERO(&affinity);
  	CPU_SET(cpu, &affinity);
  	if (sched_setaffinity(0, sizeof(affinity), &affinity))
  		err(1, "sched_setaffinity");
  }

  static void dirty_on(int output_fd, int cpu)
  {
  	int i, wrote;

  	set_affinity(cpu);
  	for (i = 0; i < 32; i++) {
  		for (wrote = 0; wrote < bufSize; ) {
  			int ret = write(output_fd, buf+wrote, bufSize-wrote);
  			if (ret == -1)
  				err(1, "write");
  			wrote += ret;
  		}
  	}
  }

  int main(int argc, char **argv)
  {
  	int cpu, flush_cpu = 1, output_fd;
  	const char *output;

  	if (argc != 2)
  		errx(1, "usage: output_file");

  	output = argv[1];
  	bufSize = getpagesize();
  	buf = malloc(getpagesize());
  	if (buf == NULL)
  		errx(1, "malloc failed");

  	output_fd = open(output, O_CREAT|O_RDWR);
  	if (output_fd == -1)
  		err(1, "open(%s)", output);

  	for (cpu = 0; cpu < get_nprocs(); cpu++) {
  		if (cpu != flush_cpu)
  			dirty_on(output_fd, cpu);
  	}

  	set_affinity(flush_cpu);
  	if (fsync(output_fd))
  		err(1, "fsync(%s)", output);
  	if (close(output_fd))
  		err(1, "close(%s)", output);
  	free(buf);
  }

Make balance_dirty_pages() and wb_over_bg_thresh() work harder to
collect exact per memcg counters.  This avoids the aforementioned oom
kills.

This does not affect the overhead of memory.stat, which still reads the
single atomic counter.

Why not use percpu_counter? memcg already handles cpus going offline, so
no need for that overhead from percpu_counter.  And the percpu_counter
spinlocks are more heavyweight than is required.

It probably also makes sense to use exact dirty and writeback counters
in memcg oom reports.  But that is saved for later.

Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>	[4.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-04-05 16:02:31 -10:00
Chris Down
aa9694bb78 mm, memcg: create mem_cgroup_from_seq 
This is the start of a series of patches similar to my earlier
DEFINE_MEMCG_MAX_OR_VAL work, but with less Macro Magic(tm).

There are a bunch of places we go from seq_file to mem_cgroup, which
currently requires manually getting the css, then getting the mem_cgroup
from the css.  It's in enough places now that having mem_cgroup_from_seq
makes sense (and also makes the next patch a bit nicer).

Link: http://lkml.kernel.org/r/20190124194050.GA31341@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-03-05 21:07:17 -08:00