1954 Commits

Author	SHA1	Message	Date
Biju Das	54ce17dd40	dt-bindings: clk: Add r8a774b1 CPG Core Clock Definitions ... Add all RZ/G2N Clock Pulse Generator Core Clock Outputs, as listed in Table 8.2d ("List of Clocks [RZ/G2N]") of the RZ/G2N Hardware User's Manual. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1567666360-28035-1-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>	2019-10-01 09:49:40 +02:00
Biju Das	be67c41781	dt-bindings: power: Add r8a774b1 SYSC power domain definitions ... This patch adds power domain indices for the RZ/G2N (a.k.a r8a774b1) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1567666326-27373-1-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>	2019-10-01 09:49:40 +02:00
Linus Torvalds	5c6bd5de3c	Main MIPS changes for v5.4: ... - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems. -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXYaqpRUccGF1bC5idXJ0 b25AbWlwcy5jb20ACgkQPqefrLV1AN2JUQD+PQGFIlq9bo/3vLyqsXJffm+DhwVQ 4WSCSeN5brPkO8EA/153sRJBlRtG+KK5p9f7WYKUuBfbcEawuc1uwmKuy7cG =lWlM -----END PGP SIGNATURE----- Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...	2019-09-22 09:30:30 -07:00
Linus Torvalds	f97c81dc6c	ARM: SoC: late updates for v5.4 ... This is some material that we picked up into our tree late or that had complex inter-depondencies. The fact that there are these interdependencies tends to meant that these are often actually the most interesting new additions: The new Aspeed AST2600 baseboard management controller is added, this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some dependencies on other device drivers. After many years, support for the MMP2 based OLPC XO-1.75 finally makes it into the kernel. The Armada 3720 based Turris Mox open source router platform is a late addition and it follows some preparatory work across multiple branches. The OMAP2+ platform had some large-scale cleanup involving driver changes and DT changes, here we finish it off, dropping a lot of the now-unused platform data. The TI K3 platform that got added for 5.3 gains a lot more support for individual bits on the SoC, this part just came late for the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJdf6P3AAoJEJpsee/mABjZMFUP/i/J9CNJjEec0cWCG1XgP/qh SpKFf2g9Y9QzqAzDDovo7atTGHTCG8C0fn8W+bkv9h7dWj2uxRtFISM9COomUoHa 0qXUL9bbDB3LAvstLV451p4c67XsJUazV9KZPD7VsCquucWbDDYaGPz+0reSRm6y imK2jXqD0leG0CNbgRXfh64J32TF3M0/XnwbsNJreCmQvwUvkYLL5VNi/qcnvfyp k0g1/5OzH9mLertoVKWqJ9o1919Yvxdl6/eyDmTPmX08bs03WnPbCEzRVO/zkOKZ O6RcAlsjiLblQdfbDJKfbaYDDaE53d2NwdCvBIdSPmDoYM5eYjQC4PmDM0+0dmHe bFd9giBjzU2Uab7ylgeoVl6pX1ISk6bwmZxNup45cy0xyw8wuky02Wq2bQTuZbgI UcBlOGWR4aH/OCpNafn+ovDBYGc64I7EQobG7UiilrVq/libx1Uo7yjlWSxe4j8n wFchiB8It24WUiS4JhJFrTklkaf5JW3K3czdDATW7aZKjv+fnHU5GMre/hvNP4z7 qROlP69/eqNXG25VOcwWPQE8yhP43+ZgyvoVwDh1H6VZdy9WxgYyEoiBAhFfcrng +RVAT4rzylPmKP8oygVF1fpTHTS8xHrYBbjkdRaj5KqmTDdqI/nMsYoq+E0R1ScV EsnyNVq7wnvH12zrOv+I =Qtkp -----END PGP SIGNATURE----- Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC late updates from Arnd Bergmann: "This is some material that we picked up into our tree late or that had complex inter-depondencies. The fact that there are these interdependencies tends to meant that these are often actually the most interesting new additions: - The new Aspeed AST2600 baseboard management controller is added, this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some dependencies on other device drivers. - After many years, support for the MMP2 based OLPC XO-1.75 finally makes it into the kernel. - The Armada 3720 based Turris Mox open source router platform is a late addition and it follows some preparatory work across multiple branches. - The OMAP2+ platform had some large-scale cleanup involving driver changes and DT changes, here we finish it off, dropping a lot of the now-unused platform data. - The TI K3 platform that got added for 5.3 gains a lot more support for individual bits on the SoC, this part just came late for the merge window" [ This pull request itself wasn't actually sent late at all by Arnd, but I waited on the branches that it used to be pulled first, so it ends up being merged much later than the other ARM SoC pull requests this merge window - Linus ] * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) ARM: dts: dir685: Drop spi-cpol from the display ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB ARM: exynos: Enable support for ARM architected timers ARM: samsung: Fix system restart on S3C6410 ARM: dts: mmp2: add OLPC XO 1.75 machine ARM: dts: mmp2: rename the USB PHY node ARM: dts: mmp2: specify reg-shift for the UARTs ARM: dts: mmp2: add camera interfaces ARM: dts: mmp2: fix the SPI nodes ARM: dts: mmp2: trivial whitespace fix arm64: dts: marvell: add DTS for Turris Mox dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address arm64: dts: ti: k3-j721e-main: Add hwspinlock node arm64: dts: ti: k3-am65-main: Add hwspinlock node arm64: dts: k3-j721e: Add gpio-keys on common processor board dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E ...	2019-09-20 15:53:02 -07:00
Linus Torvalds	a703d279c5	We have a small collection of core framework updates this time, mostly around ... clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6 -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl2FQEMRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSXHQw//XHnT5DPphpP8ua4x8wuJARdf0n58Vcdb 8fZxxs4QN7uuKhg6aMI4kgwBn+9tgIr65hvN0Gn9Wm5Bsbs3XZvdIo7DvQDrYg7W NE7192iy2Dg+m+C24YLO7ceZgqVepbjeN+6oeUK88Ui+H+XlOKfJvjfnJ+HxN9Ip sHnLakIxqlaWvzwTUOHOcsrHyQD2OXupbfNMxLnmr8T/kBh/nqwNEG3aYCppICsg LpJL9Bv2V3QSk8uBszTgKK5ybWo14aDQPx4rrhgsneD0h7DSnx6M3jvngxMra6W0 fnare4FQlkbPmgAj+XtB7RdCzsuwoke/7TJsvDLQrEbyOYTGnl7bYS8NOSrIg5Tp w4UPpXrMTQK7e/6okL1OJYAXXYurxep8QjsjpF3nahxC3IVzAZ9uio6ehJrDNEPC ErqOSPQTMkjOA2npovsQKCH3Mv/yGzAigpsQassPneWwp//NupMLKmmIm6645Xw2 6kqSlVFYz81lhzIylGEQKIoiLcszpB6qqWUzGVt0B94joRbvg0m//8BDaZbHeTqP m/acRYHRC1utpkAZEnBZRsd79cI+EeuARROUfGsoUMfOueTc4+qQ7Yrjbj4rTvnC lLM9Qz9h1QkfyRF1IHHPw/fS5twpNTUdO9c1+3qzS3AQfl5dZWpChoF9Um+ycVPR nQrpk05pHEY= =z8wK -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...	2019-09-20 15:45:07 -07:00
Stephen Boyd	b6c444de05	Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and 'clk-actions' into clk-next ... - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Evict parents from parent cache when they're unregistered * clk-cdce-regulator: clk: clk-cdce925: Add regulator support dt-bindings: clock: cdce925: Add regulator documentation * clk-bcm: clk: bcm2835: Mark PLLD_PER as CRITICAL clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support clk: bcm2835: Introduce SoC specific clock registration dt-bindings: bcm2835-cprman: Add bcm2711 support * clk-evict-parent-cache: clk: Evict unregistered clks from parent caches * clk-actions: clk: actions: Fix factor clk struct member access	2019-09-19 15:31:46 -07:00
Stephen Boyd	91bcbc11d6	Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-next ... * clk-renesas: clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain dt-bindings: clk: emev2: Rename bindings documentation file clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper * clk-rockchip: clk: rockchip: Add clock controller for the rk3308 clk: rockchip: Add dt-binding header for rk3308 dt-bindings: Add bindings for rk3308 clock controller clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver * clk-const: clk: spear: Make structure i2s_sclk_masks constant * clk-simplify: clk/ti: Use kmemdup rather than duplicating its implementation clk: fix devm_platform_ioremap_resource.cocci warnings	2019-09-19 15:31:41 -07:00
Stephen Boyd	a1ff1ce300	Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-next ... - Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1	2019-09-19 15:31:27 -07:00
Stephen Boyd	f5c7305db3	Merge branches 'clk-qcom', 'clk-mtk', 'clk-armada', 'clk-ingenic' and 'clk-meson' into clk-next ... - Support qcom SM8150 RPMh clks - Set floor ops for qcom sd clks - Support qcom QCS404 WCSS clks - Support for Mediatek MT6779 SoCs - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) * clk-qcom: clk: qcom: rcg: Return failure for RCG update clk: qcom: fix QCS404 TuringCC regmap clk: qcom: clk-rpmh: Add support for SM8150 dt-bindings: clock: Document SM8150 rpmh-clock compatible clk: qcom: clk-rpmh: Convert to parent data scheme dt-bindings: clock: Document the parent clocks clk: qcom: gcc: Use floor ops for SDCC clocks clk: qcom: gcc-qcs404: Use floor ops for sdcc clks clk: qcom: gcc-sdm845: Use floor ops for sdcc clks clk: qcom: define probe by index API as common API clk: qcom: Add WCSS gcc clock control for QCS404 clk: qcom: msm8916: Don't build by default clk: qcom: gcc: Add global clock controller driver for SM8150 dt-bindings: clock: Document gcc bindings for SM8150 clk: qcom: clk-alpha-pll: Add support for Trion PLLs clk: qcom: clk-alpha-pll: Remove post_div_table checks clk: qcom: clk-alpha-pll: Remove unnecessary cast * clk-mtk: clk: mediatek: Runtime PM support for MT8183 mcucfg clock provider clk: mediatek: Register clock gate with device clk: mediatek: add pericfg clocks for MT8183 dt-bindings: clock: mediatek: add pericfg for MT8183 clk: mediatek: Add MT6779 clock support clk: mediatek: Add dt-bindings for MT6779 clocks dt-bindings: mediatek: bindings for MT6779 clk clk: reset: Modify reset-controller driver * clk-armada: clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: mvebu: ap806: Fix clock name for the cluster clk: mvebu: add CPU clock driver for Armada 7K/8K clk: mvebu: add helper file for Armada AP and CP clocks dt-bindings: ap806: add the cluster clock node in the syscon file * clk-ingenic: clk: ingenic: Use CLK_OF_DECLARE_DRIVER macro clk: ingenic/jz4740: Fix "pll half" divider not read/written properly * clk-meson: (23 commits) clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock clk: meson: g12a: add support for SM1 GP1 PLL dt-bindings: clk: meson: add sm1 periph clock controller bindings clk: meson: axg-audio: add g12a reset support dt-bindings: clock: meson: add resets to the audio clock controller clk: meson: g12a: expose CPUB clock ID for G12B clk: meson: g12a: add notifiers to handle cpu clock change clk: meson: add g12a cpu dynamic divider driver clk: core: introduce clk_hw_set_parent() clk: meson: remove clk input helper clk: meson: remove ee input bypass clocks clk: meson: clk-regmap: migrate to new parent description method clk: meson: meson8b: migrate to the new parent description method clk: meson: axg: migrate to the new parent description method clk: meson: gxbb: migrate to the new parent description method clk: meson: g12a: migrate to the new parent description method clk: meson: remove ao input bypass clocks clk: meson: axg-aoclk: migrate to the new parent description method clk: meson: gxbb-aoclk: migrate to the new parent description method ...	2019-09-19 15:30:59 -07:00
Linus Torvalds	b682242f60	- qcom : enable support for ipq8074, sm1850 and sm7180. ... add child device node for qcs404. misc fixes. - mediatek : enable support for mt8183. misc rejig of cmdq driver. new client-reg dt property. - armada: use device-managed registration api -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAl2CUw8ACgkQf9lkf8eY P5XWdQ/+JMGoG8nbTkFdvgnRXvxdtZLylOTotnEpYtIOQ6qAckkOc0rGih3qXXRq 5FUCynImnx0Pqjso8ny8xSqfGy2B1f87tg+GD2r38XjLPo+5gJMkd5aCZ4JtEKZQ ms+23pPXCLhh6bej6WW3fmuwk8T3USWfGGhRFQOHN9e152dThXt3vvLo40vy/GD5 xT2qChONXmyPrG1F3qJhGcHuiubBzZ2mxfEC294PyVwWKdaJ5StlBmSQpomJsJP3 v04SNI8P/gMtNhFfIVks9Hj1eu2PlO7p+4DpyhBDQii5Dzv+bSnJHIJch6DOYdou h1aezWGHdJ5IcJTZcKVq0a8wyCoOGFU6znQQKRDtIdpgoDfGVmIe2bheFB4ePXOQ XI9gsNGBrgS4uA5lJKJyJrAokXpTCiwA69c7UULRPKa0jbmVwbrJxxbLYL4k5euC Qi6r3qPxvJ+3kYzegqtzHRYx9s+3Bt0CkHG8hv/XtETzM2Jg7TXy9yEF6d53jFAx f0eU7PWdfM8TbQYGQ67BRYtSITaL8TgVafby5S1T9jLA5QnCAf4/TMCtJjxvCOVp hMBm9JCnQ2U9c8geGkcU51Oz78sdTByE+q0Rzw6C9jFQxECRiSC/a7tvI7Pkui4y w9UpCJNfypGHi+WT/UuCePi2JlnPRVCquKR2TEb8BZQKTEV4owk= =V6QY -----END PGP SIGNATURE----- Merge tag 'mailbox-v5.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - qcom: - enable support for ipq8074, sm1850 and sm7180 - add child device node for qcs404 - misc fixes - mediatek: - enable support for mt8183 - misc rejig of cmdq driver - new client-reg dt property - armada: - use device-managed registration api * tag 'mailbox-v5.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom-apcs: fix max_register value mailbox: qcom: Add support for IPQ8074 APCS dt-bindings: mailbox: qom: Add ipq8074 APPS compatible mailbox: qcom: Add support for Qualcomm SM8150 and SC7180 SoCs dt-bindings: mailbox: Add APSS shared for SM8150 and SC7180 SoCs mbox: qcom: replace integer with valid macro mbox: qcom: add APCS child device for QCS404 mailbox: mediatek: cmdq: clear the event in cmdq initial flow mailbox: mediatek: cmdq: support mt8183 gce function mailbox: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data dt-binding: gce: add binding for gce client reg property dt-binding: gce: add gce header file for mt8183 dt-binding: gce: remove thread-num property mailbox: armada-37xx-rwtm: Use device-managed registration API	2019-09-19 14:01:47 -07:00
Linus Torvalds	e3a008ac12	Devicetree updates for v5.4: ... - A bunch of DT binding conversions to DT schema format - Clean-ups of the Arm idle-states binding - Support a default number of cells in of_for_each_phandle() when the cells name is missing - Expose dtbs_check and dt_binding_check in the make help - Convert writting-schema.md to ReST - HiSilicon reset controller binding updates - Add documentation for MT8516 RNG -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl2Dj38QHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw4qcEACE16/eR0h9FSnhN0QpyFlGrfUTy86K5Z4N IoJsGind4G7+TrNA6GGZwQkNRt3roWdrkqnLLvcted+8IVaXOFm0n12w2u0yoYvk C4pqxH2HRUC9U9eBjyDxdiplH9yYZPuy8bFwLPSQk0bkCd6D3I8iDe6qHm1arin3 sYIQ03jbZKowHixOuMNvu9rBiun79Lm5FfGUSi7EYab3KZ4Zt9HX1IiySRYVOWZT z6bjWbVfFe7HgbImwaB+WUYumUyNu5dh4AyqIidb9o6BB6ZENfnBNWPi0VDFuSGT 4wVc8XrcU3d7bt6Sstt+g3WZjn+JBMLNBkNnMjZ+nlp3OoR5F6Tf1RO6mrZtsENa sAspr18zNQK7CNBy0uKzBT32Z0oN1wXnsKRS5P1o5/8aEjRr0m8stxes3hOQhtuJ Y6rKLN9kGrQIeSY7nagWuGFaJ1uunGXCSgam+kb6YI8nDa3DUbzeIhYMIcqgz/Sx Gx2txPzKMHXgzF7Zc+5db9X3E7pg8Y1zrhk7o2oKiFVWrnwlEJivMcRHq9n3anOr RGAJPjrRfzwZNIQgYNflYHAdxVLyKKhpxEQDdo/5PXeMRYtghOH+rIxwoS31FHSs u/4nf0uHFQfkmSg7nSKicfSWt5ORR5G/H9cc83SRoix35kfPubirkawJ/tkcVuO4 3n0NeGERtA== =ZO6c -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - a bunch of DT binding conversions to DT schema format - clean-ups of the Arm idle-states binding - support a default number of cells in of_for_each_phandle() when the cells name is missing - expose dtbs_check and dt_binding_check in the make help - convert writting-schema.md to ReST - HiSilicon reset controller binding updates - add documentation for MT8516 RNG * tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits) of: restore old handling of cells_name=NULL in of_*_phandle_with_args() bus: qcom: fix spelling mistake "ambigous" -> "ambiguous" of: Let of_for_each_phandle fallback to non-negative cell_count iommu: pass cell_count = -1 to of_for_each_phandle with cells_name dt-bindings: arm: Convert Realtek board/soc bindings to json-schema dt-bindings: arm: Convert Actions Semi bindings to jsonschema dt-bindings: Correct spelling in example schema dt-bindings: cpu: Add a support cpu type for cortex-a55 dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible dt-bindings: arm: idle-states: Move exit-latency-us explanation dt-bindings: arm: idle-states: Add punctuation to improve readability dt-bindings: arm: idle-states: Correct "constraint guarantees" dt-bindings: arm: idle-states: Correct references to wake-up delay dt-bindings: arm: idle-states: Use "e.g." and "i.e." consistently pinctrl-mcp23s08: Fix property-name in dt-example dt-bindings: Clarify interrupts-extended usage dt-bindings: Convert Arm Mali Utgard GPU to DT schema dt-bindings: Convert Arm Mali Bifrost GPU to DT schema dt-bindings: Convert Arm Mali Midgard GPU to DT schema dt-bindings: irq: Convert Allwinner NMI Controller to a schema ...	2019-09-19 13:48:37 -07:00
Linus Torvalds	6cfae0c26b	Char/Misc driver patches for 5.4-rc1 ... Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIT1g8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ym9lwCgrHZlMMvfYNVm6GQ5ge58JJsVTL4AoNatTcL4 hfVMA6pCHWBjV65xVSf6 =Tijw -----END PGP SIGNATURE----- Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...	2019-09-18 11:14:31 -07:00
Linus Torvalds	4feaab05dc	LED updates for 5.4-rc1 ... -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl 2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L UPF66k76oOODV7cyndjXnTnRXbeCRAM= =Szby -----END PGP SIGNATURE----- Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...	2019-09-17 18:40:42 -07:00
Chunfeng Yun	f9e55ac22c	clk: mediatek: add pericfg clocks for MT8183 ... Add pericfg clocks for MT8183, it's used when support USB remote wakeup Cc: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lkml.kernel.org/r/1566980533-28282-2-git-send-email-chunfeng.yun@mediatek.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2019-09-17 10:17:41 -07:00
Stefan Wahren	80766f8726	dt-bindings: bcm2835-cprman: Add bcm2711 support ... The new BCM2711 supports an additional clock for the emmc2 block. So we need an additional compatible. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>	2019-09-17 09:55:30 -07:00
Bibby Hsieh	8fedf805fa	dt-binding: gce: add gce header file for mt8183 ... Add documentation for the mt8183 gce. Add gce header file defined the gce hardware event, subsys number and constant for mt8183. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>	2019-09-17 00:40:05 -05:00
Linus Torvalds	cef7298262	ARM: DT updates for v5.4 ... This is another huge branch with close to 450 changessets related to devicetree files, roughly half of this for 32-bit and 64-bit respectively. There are lots of cleanups and additional hardware support for platforms we already support based on SoCs from Renesas, ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and other manufacturers. A total of 6 new SoCs and 37 new boards gets added this time, one more SoC will come in a follow-up branch. Most of the new boards are for 64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7. Going more into details for SoC platforms with new hardware support: The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone platform, usually paired with an external 5G modem. So far we only support the Qualcomm SM8150 MTP reference platform, but no actual products. For the slightly older Qualcomm platforms, support for several interesting products is getting added: Three laptops based on Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix 630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630) and several phones based on the older Snapdragon 410/MSM8916 (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed" aka Wileyfox Swift). Mediatek MT7629 is a new wireless network router chip, similar to the older MT7623. It gets added together with the reference board implementation. Allwinner V3 is a repackaged version of the existing low-end V3s chip, and is used in the tiny Lichee Pi Zero plus, also added here. There is also a new TV set-top box based on Allwinner H6, the Tanix TX6, and the eMMC variant of the Olimex A64-Olinuxino development board. NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC family, similar to the i.MX8M Mini. As usual, there is a large number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML, SolidRun Hummingboard Pulse baseboard and System-on-Module, Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight Innovations i.MX7 RMU2 board. In a different NXP product line, the Layerscape LS1046A "Freeway" reference board gets added. Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from their set-top-box line and smart speaker with newer CPU and GPU cores compared to their predecessors. Both are now also supported by the Khadas VIM3 development board series, and the dts files for that get reorganized a bit to better deal with all variants. Another board based on SM1 that gets added is the SEI Robotics SEI610. There are a handful of new x86 and Power9 server boards using Aspeed BMC chips that are gaining support for running Linux on the BMC through the OpenBMC project: Facebook Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably these are still new machines using SoCs based on the ARM9 and ARM11 CPU cores, as support for the new Cortex-A7 based AST2600 is still ramping up. There are three new end-user products using 32-bit Rockchips SoCs: Mecer Xtreme Mini S6 is an Android "mini PC" box based on the low-end RK3229 chip, while the two AOpen products Chromebox Mini (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for commercial settings (digital signage, PoS, ...). One more single-board computer based on the popular 64-bit RK3399 is added: the Leez RK3399 P710. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJdf6StAAoJEJpsee/mABjZDfEP/3h0GusRkoQ6PJ5FHsj4nIR6 NJK8RxmX4B4ctXxBc+Rbt8bHp1d/IdHL4Jcqe7xgR2OIVQPloJz1lFrLaF0wn4Mu G1EP2DzcLym3K0lBwhByvXfU1s2lhaTYdT594J8kTEVgcPXe79LKqH42A1T+1IlC 7+xAh9sU++NLo64w+Iam3d3T72ugyeO7THWiie7Rb9wACS94i7cZwvasur35aHxf Ut5nOQYPbTuVVvN1FfZAdrHJpK9r7pbJLVwHLMdHnUYup2XDmoC6iuDrKlsWxqjs SBL0u+dO5pkdKQp17RZFQZwrx2Y97E9KLWaT9Cqb7nwJ+ftYf419TUioQvmyJRZd DEsCz6GVCCOs2zFcGj+9iGRr5wA2O3I42dOZkkkTciztksFwSmomrSlwAgVBT2ms In6K3g2DrN31aDGFW9dZnxBXHVHWXkqr/TN4UIO2h0jfR4bazAvPzBiDpJdkz1NY KPpDrdTRA2k4UnSimot/7Pw8y2NtsTDVJeQS1KydSe44PiLLumO8hg+FfnhJoW5s oaSjX89549JvUIrA7TbXPxpyGS8oo7a1XkQyzfWZs8l7JMWoR5oK/VdiuDBL7YDE XFlcZmCmB+kUgtSgXjw9FflkoMn06usVZBo1rnWFApYmzZ3htnniNSgz/zjMJpXn OtQTQnP2LzS+ioxqB2Se =Bm5T -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM DT updates from Arnd Bergmann: "This is another huge branch with close to 450 changessets related to devicetree files, roughly half of this for 32-bit and 64-bit respectively. There are lots of cleanups and additional hardware support for platforms we already support based on SoCs from Renesas, ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and other manufacturers. A total of 6 new SoCs and 37 new boards gets added this time, one more SoC will come in a follow-up branch. Most of the new boards are for 64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7. Going more into details for SoC platforms with new hardware support: - The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone platform, usually paired with an external 5G modem. So far we only support the Qualcomm SM8150 MTP reference platform, but no actual products. - For the slightly older Qualcomm platforms, support for several interesting products is getting added: Three laptops based on Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix 630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630) and several phones based on the older Snapdragon 410/MSM8916 (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed" aka Wileyfox Swift). - Mediatek MT7629 is a new wireless network router chip, similar to the older MT7623. It gets added together with the reference board implementation. - Allwinner V3 is a repackaged version of the existing low-end V3s chip, and is used in the tiny Lichee Pi Zero plus, also added here. There is also a new TV set-top box based on Allwinner H6, the Tanix TX6, and the eMMC variant of the Olimex A64-Olinuxino development board. - NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC family, similar to the i.MX8M Mini. As usual, there is a large number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML, SolidRun Hummingboard Pulse baseboard and System-on-Module, Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight Innovations i.MX7 RMU2 board. - In a different NXP product line, the Layerscape LS1046A "Freeway" reference board gets added. - Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from their set-top-box line and smart speaker with newer CPU and GPU cores compared to their predecessors. Both are now also supported by the Khadas VIM3 development board series, and the dts files for that get reorganized a bit to better deal with all variants. Another board based on SM1 that gets added is the SEI Robotics SEI610. - There are a handful of new x86 and Power9 server boards using Aspeed BMC chips that are gaining support for running Linux on the BMC through the OpenBMC project: Facebook Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably these are still new machines using SoCs based on the ARM9 and ARM11 CPU cores, as support for the new Cortex-A7 based AST2600 is still ramping up. - There are three new end-user products using 32-bit Rockchips SoCs: Mecer Xtreme Mini S6 is an Android "mini PC" box based on the low-end RK3229 chip, while the two AOpen products Chromebox Mini (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for commercial settings(digital signage, PoS, ...). - One more single-board computer based on the popular 64-bit RK3399 is added: the Leez RK3399 P710" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits) arm64: dts: qcom: Add Lenovo Yoga C630 ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit ARM; dts: aspeed: mihawk: File should not be executable ARM: dts: aspeed: swift: Change power supplies to version 2 ARM: dts: aspeed: vesnin: Add secondary SPI flash chip ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option ARM: dts: aspeed-g4: Add all flash chips ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250 ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks ARM: dts: exynos: Remove not accurate secondary ADC compatible arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328 arm64: dts: meson-sm1-sei610: add stdout-path property back arm64: dts: meson-sm1-sei610: enable DVFS arm64: dts: khadas-vim3: add support for the SM1 based VIM3L dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi arm64: dts: meson: g12a: add reset to tdm formatters ...	2019-09-16 15:56:22 -07:00
Linus Torvalds	399eb9b6cb	ARM: SoC driver updates for v5.4 ... The branch contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd PYZ2UpqUeX8cdvggqUUU =lxFi -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...	2019-09-16 15:52:38 -07:00
Linus Torvalds	52a5525214	IOMMU Updates for Linux v5.4: ... Including: - Batched unmap support for the IOMMU-API - Support for unlocked command queueing in the ARM-SMMU driver - Rework the ATS support in the ARM-SMMU driver - More refactoring in the ARM-SMMU driver to support hardware implemention specific quirks and errata - Bounce buffering DMA-API implementatation in the Intel VT-d driver for untrusted devices (like Thunderbolt devices) - Fixes for runtime PM support in the OMAP iommu driver - MT8183 IOMMU support in the Mediatek IOMMU driver - Rework of the way the IOMMU core sets the default domain type for groups. Changing the default domain type on x86 does not require two kernel parameters anymore. - More smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl1/pdoACgkQK/BELZcB GuMvCw/+K1GPyyZbPWAuXcnclraSZTHXS1lV0yilBXXyT2omFRQpRJYZGN/8NTbE SqD2FtzTKGuGSy2jA0drd3RcMKK/zZsFYnJShiM3FHLXatZdaFrnkK7vRHuzKlHf dvOlH7gHKtjIPPXodUEb0xd/oRAEIVsKjJyq1fBMARPPAluhU7mIFUI/xbGvX17g LM00hIxEhVNsSPemU2kTVISNBPVneecNVLlKXySjp0YPW/+sf8R7tTvwlSXX6h3I JM6wOU479O8mBvIcpAjfZlanHCHtqLk0ybaPx666DjdgYx6cUBHbDCF0P57XnGJA HNeVGtBwGQb8VWgbPLJKrStSOzYudDG8ndctqfKYN7uiPDjYM2/sqXcwQSVXR9vX AjT2s0GFEWT/AJhgBSeg9PJilEX1hPtomGKcQhKfR0wRGycixeZJFbwToQqzJrZN 7XoORbZPH1S5W6sjXsXH3eVPW3EGnKipulJSPGDqFLa2aIUG+PXuu/A+iJS6sADh mqzVfcEs3/NYsro40eA/iQc0t99ftJXgpX18KxYprjyL6VWcwC/xeHcT/Zw9abxz r7dYDGTR0z6RIew0GOaeZVdZJh/J6yraKCNDS0ARZgol6JPaU7HGHhh6Ohdmmu8L Gtsgdxp4NeLEgp4mQiRvvpQ5pPJ/YR+oCOx3v+PPnKRLhMTxymQ= =UF08 -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - batched unmap support for the IOMMU-API - support for unlocked command queueing in the ARM-SMMU driver - rework the ATS support in the ARM-SMMU driver - more refactoring in the ARM-SMMU driver to support hardware implemention specific quirks and errata - bounce buffering DMA-API implementatation in the Intel VT-d driver for untrusted devices (like Thunderbolt devices) - fixes for runtime PM support in the OMAP iommu driver - MT8183 IOMMU support in the Mediatek IOMMU driver - rework of the way the IOMMU core sets the default domain type for groups. Changing the default domain type on x86 does not require two kernel parameters anymore. - more smaller fixes and cleanups * tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (113 commits) iommu/vt-d: Declare Broadwell igfx dmar support snafu iommu/vt-d: Add Scalable Mode fault information iommu/vt-d: Use bounce buffer for untrusted devices iommu/vt-d: Add trace events for device dma map/unmap iommu/vt-d: Don't switch off swiotlb if bounce page is used iommu/vt-d: Check whether device requires bounce buffer swiotlb: Split size parameter to map/unmap APIs iommu/omap: Mark pm functions __maybe_unused iommu/ipmmu-vmsa: Disable cache snoop transactions on R-Car Gen3 iommu/ipmmu-vmsa: Move IMTTBCR_SL0_TWOBIT_* to restore sort order iommu: Don't use sme_active() in generic code iommu/arm-smmu-v3: Fix build error without CONFIG_PCI_ATS iommu/qcom: Use struct_size() helper iommu: Remove wrong default domain comments iommu/dma: Fix for dereferencing before null checking iommu/mediatek: Clean up struct mtk_smi_iommu memory: mtk-smi: Get rid of need_larbid iommu/mediatek: Fix VLD_PA_RNG register backup when suspend memory: mtk-smi: Add bus_sel for mt8183 memory: mtk-smi: Invoke pm runtime_callback to enable clocks ...	2019-09-16 14:14:40 -07:00
Arnd Bergmann	375a7baddb	Merge branch 'aspeed/dt-3' into arm/late ... * aspeed/dt-3: ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB clk: Add support for AST2600 SoC clk: aspeed: Move structures to header clk: aspeed: Add SDIO gate	2019-09-12 12:06:07 +02:00
mtk01761	85b18fe704	clk: mediatek: Add dt-bindings for MT6779 clocks ... Add MT6779 clock dt-bindings, include topckgen, apmixedsys, infracfg, and subsystem clocks. Signed-off-by: mtk01761 <wendell.lin@mediatek.com> Link: https://lkml.kernel.org/r/1566206502-4347-10-git-send-email-mars.cheng@mediatek.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2019-09-09 09:37:29 -07:00
Joel Stanley	d3d04f6c33	clk: Add support for AST2600 SoC ... The ast2600 is a new BMC SoC from ASPEED. It contains many more clocks than the previous iterations, so support is broken out into it's own driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/20190825141848.17346-3-joel@jms.id.au [sboyd@kernel.org: Mark arrays const] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2019-09-06 15:22:29 -07:00
Finley Xiao	efb7740f25	clk: rockchip: Add dt-binding header for rk3308 ... Add the dt-bindings header for the rk3308, that gets shared between the clock controller and the clock references in the dts. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>	2019-09-05 11:32:25 +02:00
Lokesh Vutla	7a800c418c	dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access ... TISCI protocol supports for enabling the device either with exclusive permissions for the requesting host or with sharing across the hosts. There are certain devices which are exclusive to Linux context and there are certain devices that are shared across different host contexts. So add support for getting this information from DT by increasing the power-domain cells to 2. Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2019-09-04 20:44:34 +02:00
Arnd Bergmann	49826a68b5	mvebu dt64 for 5.4 (part 2) ... Add support for Turris Mox board (Armada 3720 SoC based) -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXW5eNQAKCRALBhiOFHI7 1aqnAJsGU/B3GFbhiuwI4+l3In7TMVVpIgCbB1T/eo1RJhvh9kH9zMj641Rmsk0= =B8dQ -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu into arm/late mvebu dt64 for 5.4 (part 2) Add support for Turris Mox board (Armada 3720 SoC based) * tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu: (53 commits) arm64: dts: marvell: add DTS for Turris Mox dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl arm64: dts: marvell: Add cpu clock node on Armada 7K/8K arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes arm64: dts: marvell: Add CP110 COMPHY clocks arm64: dts: marvell: armada-37xx: add mailbox node dt-bindings: gpio: Document GPIOs via Moxtet bus drivers: gpio: Add support for GPIOs over Moxtet bus bus: moxtet: Add sysfs and debugfs documentation dt-bindings: bus: Document moxtet bus binding bus: Add support for Moxtet bus reset: Add support for resets provided by SCMI firmware: arm_scmi: Add RESET protocol in SCMI v2.0 dt-bindings: arm: Extend SCMI to support new reset protocol firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels ... Link: https://lore.kernel.org/r/87h85two0r.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2019-09-04 17:28:47 +02:00
Arnd Bergmann	65ab0dba3c	Texas Instruments K3 SoC family changes for 5.4 ... - Typo fixes for gic-its unit addresses for both am654 and j721e - HW spinlock nodes added for both am654 and j721e - GPIO support for j721e - power-domain cells update for both am654 / j721e for exclusive only access -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEtQ6szHmfiBT7fujkyvq9MXlQGhEFAl1pFzsQHHQta3Jpc3Rv QHRpLmNvbQAKCRDK+r0xeVAaERL3D/44Xth2Ti/UIZIzZrM7t6R2t84UYoYF2AFu 129ehlVk7k6pqiv1FRHG4SQpRV09DRmUX1JIoukoNtfrQMmF1C1/ryLaHGf/4vV6 sj/tbIPs1LxrTomCOuoLG2quhu6JBHDWE8ZjRJnOFo7rHOTo1w0orOnnnx6S0ES8 5WyFAecfI34noroFcHZ0mKcZmG2/AkzY6pDQGSMOnugbCjq2EteFwoKcVssKdcsA tlT5KkqAwehS4CdZxObikE3y5rYALinFcZYATzX1eHkd4Jqo0PchunXSLj0A5y7i 7tVSslCaCZKKFg7BYpXbKA/vAhMXfpKjpL3hosHb7qPQ84GsCl1WIfH4HKtqkOXA 81jbOZu7Dgqx7J11Dtj7h46G84pxaO/78izEoineheIfKheYePyG1rRcJAHkxebF hGZE/KbXyx5Uj8sjVtrCg4/xdrnD17JT/GGelw83vPIxf49rWvq1Rt+njIDCcIyq GpWwjjJWnKbLx75Dr480YEU6Klp4YuyBOOL9X+/8dQLTOhtlmR2jq4TzkqtDsqWW DFp2HQSCv7jsFag50qYrUCwcvI9Ru8MMNIX9laXVKPINqVB0aMa00EdvpBDY2eMh mOXeurMY7jQ907oymSw7rx6DhjlQx9qcNqHgpyTJ7k9xSVW5NqQoTBnmm06pviC6 55xzDSjBAw== =OoxU -----END PGP SIGNATURE----- Merge tag 'ti-k3-soc-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/late Texas Instruments K3 SoC family changes for 5.4 - Typo fixes for gic-its unit addresses for both am654 and j721e - HW spinlock nodes added for both am654 and j721e - GPIO support for j721e - power-domain cells update for both am654 / j721e for exclusive only access * tag 'ti-k3-soc-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address arm64: dts: ti: k3-j721e-main: Add hwspinlock node arm64: dts: ti: k3-am65-main: Add hwspinlock node arm64: dts: k3-j721e: Add gpio-keys on common processor board dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E arm64: dts: ti: k3-j721e-common-proc-board: Disable unused gpio modules arm64: dts: ti: k3-j721e: Add gpio nodes in wakeup domain arm64: dts: ti: k3-j721e: Add gpio nodes in main domain arm64: dts: ti: k3-j721e: Update the power domain cells arm64: dts: ti: k3-am654: Update the power domain cells soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests Link: https://lore.kernel.org/r/b838d666-ab3b-7d41-67d4-09d606c732da@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2019-09-04 17:22:43 +02:00
Arnd Bergmann	f02bd65a5b	arm64: dts: Amlogic updates for v5.4 (round 2) ... - new board: Khadas VIM3L (SM1/S905D3 SoC) - support power domains on G12[AB] and SM1 SoCs - DT binding fixups based on YAML schema - add a bunch of remote control keymap - enable DVFS on SM1/SEI610 board -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl1oX4gACgkQWTcYmtP7 xmVgmA//bj9MUuKJYgXJ6ZSdtSFK7tL3MwqMmwJpt8PPRt+KTUEr3x6Ix+ZvkpYB YsiUYvA0URIL5gcibsIP6UsO6c0QAwnW6NaWGl96cHPwGAB6cBdWY5msxHEC6KaN GzBOjlsTTv1gFptz9vLd8RvEXeH/M92pdIwWQrIE1c9LXKfLoLhC5dHlw9iHG7kN ja7Qsv9J3GkuTPYoPh04X2q44NPGwUtxhMNqGbn9S9T5YCqXkKa4RWgyvs/Iam72 hs/humUMdlciH4pSFikKQd0Xouf2cYnEIsVqWFuHFgDs5KuYrSlOAutVgkcFOcnb bG61iKV5urue0sxnar8Fx0OR6aeT04A9zGHWEPH6Tq2kfl5VQNZUKZb5XUZJWgWe vj0kTG6L7wk5oem19TtHOTZTpwRTdk3Bkth+dt9RZtmVC/HL1C79Fkt1BKpCYesQ 7tsUmNnTprz0unUQIbY6UMfzpD8JixGM/ak5ODJ+pQivFlbgu/eQTDNRAOsEjszn w7AZtyp2AANJN/u5Vxf8IqonOzF1UhMyrIa39D6vAQn0xfCMlFh0RcV5Afs4qows GRJ17JMVL7da/cbyoG17gCyQSYYTWPkPIbqOEyUOTqOzEGVgHweNsBOWBkEwolNv v0+rIJHjw11527ibqdBxMIKIrSIfhN63j343zN0RrwMdZbHroJg= =7yjy -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.4 (round 2) - new board: Khadas VIM3L (SM1/S905D3 SoC) - support power domains on G12[AB] and SM1 SoCs - DT binding fixups based on YAML schema - add a bunch of remote control keymap - enable DVFS on SM1/SEI610 board * tag 'amlogic-dt64-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (44 commits) arm64: dts: meson-sm1-sei610: add stdout-path property back arm64: dts: meson-sm1-sei610: enable DVFS arm64: dts: khadas-vim3: add support for the SM1 based VIM3L dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi arm64: dts: meson: g12a: add reset to tdm formatters arm64: dts: meson: g12a: audio clock controller provides resets arm64: dts: meson-sm1-sei610: enable DVFS arm64: dts: meson-gxm-khadas-vim2: use rc-khadas keymap arm64: dts: meson-gxl-s905w-tx3-mini: add rc-tx3mini keymap arm64: dts: meson-gxl-s905x-khadas-vim: use rc-khadas keymap arm64: dts: meson-gxbb-wetek-play2: add rc-wetek-play2 keymap arm64: dts: meson-gxbb-wetek-hub: add rc-wetek-hub keymap arm64: dts: meson-g12a-x96-max: add rc-x96max keymap arm64: dts: meson-g12b-odroid-n2: add rc-odroid keymap arm64: dts: meson-sm1-sei610: add USB support arm64: dts: meson-sm1-sei610: add HDMI display support arm64: dts: meson-g12: add Everything-Else power domain controller arm64: dts: meson: fix boards regulators states format arm64: dts: meson-gxbb-p201: fix snps, reset-delays-us format ... Link: https://patchwork.kernel.org/patch/11122331/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2019-09-03 23:16:39 +02:00
Arnd Bergmann	87288375bb	soc: amlogic: updates for v5.4 (round 2) ... - add power domain controller -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl1oWskACgkQWTcYmtP7 xmV37Q//d2oS1HQwhD9KaXztl75Ea10UY/k+Um9WAaVRifZLueYZWzhdqs/9r5pD AK9saIoVALBMJkcBZfCQS5/Z+R5B8WKOUeO0QYbB4WlX3VjRllADHLyxHYH2YbMa gIHONWnSPtiEqbjDKTM848FNWlUIgeAt0p9kble+Eet3gZL2B/EtmqnXMhtg5wbg ONOEYaLpVhFCdk1nibK49rwDwOzlhoVJOMLIdyw6b/mc0ekcIMgqR0HibJ8cjhO8 zEuOptlmsh8g1JSGI8UU2OnC9Dm7j51k+hGKGKyotdplfc+8Gar/tzWcsLzMenjl 0RuvoJoHgh5tEqiTKmrBxtXr0F5SrK83Ku0VT72wm74ipLs80PIZf3Zu73ZVJzUX qRFnW7JuFqbiWdSWBP06vtrZ/9hTart/XmtfWbZMe4x3ROP/cSAxPSXhB8iK5cPe R0//zxhrcEo5drRAqQgAqMkEKYTFW6HmNPVHZyJzfvpZovUICXnXn6nf2wsyGVXG D3XdbqhS9ev5VZEpMgyMnwHcN+Y8/dNHafoRufKKzkbOFAPmmMRLLRb4xcdCuUMF FOMx7Su3xS4SJtUcOmCvhBjBIjFjGYWFN2CVbt8edNOhBGMyzCM6NC16j6hwqzHV 9bURMqf0j+KpD7Hrk7aT2gkW6CpRS6anKQKe86yCn32JfLTJxlQ= =0F6y -----END PGP SIGNATURE----- Merge tag 'amlogic-drivers-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: amlogic: updates for v5.4 (round 2) - add power domain controller * tag 'amlogic-drivers-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller Link: https://patchwork.kernel.org/patch/11122205/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2019-09-03 22:28:58 +02:00
Greg Kroah-Hartman	e6508c7efa	phy: for 5.4 ... *) Add a new PHY driver for Lantiq VRX200/ARX300 PCIe PHY *) Add missing of_node_put() to a bunch of drivers using for_each_available_child_of_node() *) Add RXAUI/PCIe/SATA/USB3 support in Marvell's Armada CP110 COMPHY *) Other misc fixes and cleanup Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEEUXMr/TfP2p4suIY5Dlx4XIBNgtkFAl1lQAIOHGtpc2hvbkB0 aS5jb20ACgkQDlx4XIBNgtmG9w//Te50DQemUjryStFT9dcKx0GE0+fC4tStkdsD nkn1+PaYrHHrB9DU5fjYZNrI1QPGxMXX3bP1B3+rjCp8yBOEoM/UcdlZPGch93NU pa4i+it63bT4WJ/b9OGlWqJHZCwsg+uq/XkpLGW/RJiHfJMv+bNdL32q+NK3aLUB RC3/jhdHbZmXLWgcb4c12PuO4U29mZtHviK9EKTYUbc6ilfAXfFlR/+HwOX8a8Kf wlg++9/tqE8LBD3LNLUiOYOGfl2HFEhmuS4J+b71Yujx3Jh+ME6idqJepCMiQEnv nbzMxw8TrYapqB/+4a4Asb9gxY95hTtlsAlNy0qxGS+7LBrj1epFTqmdFNfhv2n7 SMXpQOc3++yN1ultXmJmt4G1pyP2hi1M1d2l++rJ4c3bNZ229gkXpvTgdw0zBMum JA9fK1+sHrJDjcvvOQ+5WcrQ7e9XyB/98mH2jBIEsybWTz7AQrmlqnKy2CEenUIj hGQRIM+Z22UBIW9OsJGj2c3xvI0Rz7EnvyJmEjCDBoVjrG+e/omOi7YXvF0cL72S jdMNTs3rErRnFldq9safwNLrIHiTeel70Lytsl44go9n6f5EO/xT+voOX6Wl3LGB hjnBb+3P1X/cJb6+rHclx+Fo7ZKlv69oxUv1NBDLqbn3l66QdKfRTnQVAdBSxJ0H gNkt8ew= =FzqB -----END PGP SIGNATURE----- Merge tag 'phy-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into char-misc-next Kishon writes: phy: for 5.4 *) Add a new PHY driver for Lantiq VRX200/ARX300 PCIe PHY *) Add missing of_node_put() to a bunch of drivers using for_each_available_child_of_node() *) Add RXAUI/PCIe/SATA/USB3 support in Marvell's Armada CP110 COMPHY *) Other misc fixes and cleanup Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (30 commits) phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT phy: marvell: phy-mvebu-cp110-comphy: implement RXAUI support dt-bindings: pci: add PHY properties to Armada 7K/8K controller bindings dt-bindings: phy: Add Marvell COMPHY clocks phy: mvebu-cp110-comphy: Update comment about powering off all lanes at boot phy: mvebu-cp110-comphy: Add PCIe support phy: mvebu-cp110-comphy: Cosmetic change in a helper phy: mvebu-cp110-comphy: Add SATA support phy: mvebu-cp110-comphy: Add USB3 host/device support phy: mvebu-cp110-comphy: Allow non-Ethernet modes to be configured phy: mvebu-cp110-comphy: Rename the macro handling only Ethernet modes phy: mvebu-cp110-comphy: Add RXAUI support phy: mvebu-cp110-comphy: List already supported Ethernet modes phy: mvebu-cp110-comphy: Add SMC call support phy: mvebu-cp110-comphy: Explicitly initialize the lane submode phy: mvebu-cp110-comphy: Add clocks support phy-rockchip-inno-hdmi: Fix RK3328_TERM_RESISTOR_CALIB_SPEED_7_0's third value phy: qcom-qmp: Correct ready status, again phy: qualcomm: phy-qcom-qmp: Add of_node_put() before return phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current ...	2019-09-03 21:49:11 +02:00
Arnd Bergmann	89e4acf7a3	i.MX device tree update with new clocks: ... - A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board device tree support. - Add DSP device tree support for i.MX8QXP SoC. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJdYom7AAoJEFBXWFqHsHzOVG8H/RTfCTmRCBaClVZ031GWl/Q2 2NP+AY1l8UE0NKsvEuoMf/VY1atvFNgDvbm4gV1PW5KOBbgZmB3M32lHvXfqbLOu vACCc8b7JY/8scWUgQBNbE5xAiZjPkLPuIYNJTLmrgVrYkYhtkB/4pwAk9YjVlYt eHF3SWizKmam8vV3yp6KUNKvEYPBiMBfjSHDUvgT0GHUB4SHpPm/ERruTdKxP0Zm c730yvV320XiKvxuErdvNfsw6FWs8Bhp8xCIhvF4Wbm0w4c5ucuqHKSV1v63lbbj GVfdi0cH/eKlugNhfhIH7RsYL5TYjCDwzEyBSnqGCaBW+gnTpRnFkEricgvB+yY= =3nO3 -----END PGP SIGNATURE----- Merge tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update with new clocks: - A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board device tree support. - Add DSP device tree support for i.MX8QXP SoC. * tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8qxp: Add DSP DT node arm64: dts: imx8mn: Add cpu-freq support arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support arm64: dts: imx8mn-ddr4-evk: Add i2c1 support arm64: dts: freescale: Add i.MX8MN DDR4 EVK board support arm64: dts: imx8mn: Add gpio-ranges property arm64: dts: freescale: Add i.MX8MN dtsi support clk: imx8: Add DSP related clocks clk: imx: Add support for i.MX8MN clock driver clk: imx: Add API for clk unregister when driver probe fail clk: imx8mm: Make 1416X/1443X PLL macro definitions common for usage dt-bindings: imx: Add clock binding doc for i.MX8MN Link: https://lore.kernel.org/r/20190825153237.28829-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2019-09-03 16:06:08 +02:00
Arnd Bergmann	90104e2be4	add support for the mt7629 reference board ... -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAl1gE/AXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00PAQRAAmLAn/iKRkgLCxcBVZKJMlcsR kFOsRnSyoPuNzlzk4TbE1tr5bcKebUFvHxELr53pnXZOGmGQH/KEyLOrLys+tfOf /KKu+Zp92C5o2ZoKeaKMuf0R/wP+CEjRs8hSDPCrVuhzrT3Zavm/xlBRYZnKGglL QylHzj/fgTMiCACRQasqyf29IyOmZYgHMoMol5LrNo6KwBggBY7kCut1NOe2MjrH UVaL+J+ZLMDj8GkzzWO3eFMjUUfQCu+/wx7b3L8iUFj2MiD9fXvVnEZc486hxhHL xKeW/3SST9Nj/3AWZKYb/xX+1CZMPqh3SlaZc4SjUZP6sNBoUpRR226Ftl2cCqh2 cnYsLtQLuYO68BgspmBrab1bQB8K/NOIO1O0SvSFkNAJYq79WSjmIEJcun1kIiA5 s9x6923W/ToXlQwFQ6fF41MdiSHXghT4N9clpThzAt3mskz97k/666oPJ4xoViGJ NQhX+qL5yoNjR8cFuAxLEJ+uL2VeSt0btPq7VdvuibBEkJl8EBWz/+r5eJoplDpx BriUpFqr+EDOVx4nFE+sK11XQ1jEkv0bMjjFRwZSVR0+VszFRPbzQjyWuu9ye0hG yZfzvjxH5guPzn41P5QH0MYcP7HxU7nZ33QKCMdn7IhSDhQOXOp6jvk+ykMzxWL8 V46g4DhndbGUfvt8Jwo= =zvko -----END PGP SIGNATURE----- Merge tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt add support for the mt7629 reference board * tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mediatek: add basic support for MT7629 SoC Link: https://lore.kernel.org/r/e236f659-2851-21b8-1873-314cd72ed6be@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2019-09-03 15:57:36 +02:00
Yong Wu	29746d0125	dt-bindings: mediatek: Add binding for mt8183 IOMMU and SMI ... This patch adds decriptions for mt8183 IOMMU and SMI. mt8183 has only one M4U like mt8173 and is also MTK IOMMU gen2 which uses ARM Short-Descriptor translation table format. The mt8183 M4U-SMI HW diagram is as below: EMI | M4U | ---------- | | gals0-rx gals1-rx | | | | gals0-tx gals1-tx | | ------------ SMI Common ------------ | +-----+-----+--------+-----+-----+-------+-------+ | | | | | | | | | | gals-rx gals-rx | gals-rx gals-rx gals-rx | | | | | | | | | | | | | | | | | | gals-tx gals-tx | gals-tx gals-tx gals-tx | | | | | | | | larb0 larb1 IPU0 IPU1 larb4 larb5 larb6 CCU disp vdec img cam venc img cam All the connections are HW fixed, SW can NOT adjust it. Compared with mt8173, we add a GALS(Global Async Local Sync) module between SMI-common and M4U, and additional GALS between larb2/3/5/6 and SMI-common. GALS can help synchronize for the modules in different clock frequency, it can be seen as a "asynchronous fifo". GALS can only help transfer the command/data while it doesn't have the configuring register, thus it has the special "smi" clock and it doesn't have the "apb" clock. From the diagram above, we add "gals0" and "gals1" clocks for smi-common and add a "gals" clock for smi-larb. >From the diagram above, IPU0/IPU1(Image Processor Unit) and CCU(Camera Control Unit) is connected with smi-common directly, we can take them as "larb2", "larb3" and "larb7", and their register spaces are different with the normal larb. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>	2019-08-30 15:57:26 +02:00
Kevin Hilman	b8b1c9ad1c	Amlogic clk dt bindings changes for v5.4 - 3rd round ... * add sm1 peripheral controller bindings -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE9OFZrhjz9W1fG7cb5vwPHDfy2oUFAl1mNgwACgkQ5vwPHDfy 2oX4/RAAg4FOZp6vLcCncY/F+KcfXkBxbox/z2TGEcKKffeudGV1LhopUTpUkgvf 446OCDDWf1IqBKwGaXVcFQu4up7FFVZM/Wwvpy13nT9wtVWJUOsXIrE1itfj2tJW ouJPwrR3d9hZXxQQeIleV0g6BVFyEp9Y7CdCWbaA5qOsutYXmLPhL3sh2UpDodqf pJR0MmN6Y4gEdTwUgsaEp2VKPzliGA9ONjbFBGJbw+Jxz/ZKKOXCnc3UALIFWCFY RFOq9Ecoq0TdXZ4MzS8uHtlWTrxts2Sn6IDAM0w9FhKHvzJBosjtQ+PH1Hv+X6Hx pMl2pPmbywoI78vCDI+tqNew0RyeueicX1NVZyiIf1U92I6dj5L9ZT6ITzjIDd4f HH8pyIgVajv7wAjweBfm5MaOJ6T8zARandvEbEGQuEwk0RBPnF6aiqbbghzwSP2x A+TgshrcOx9ggg9IwRvhPfDkKovw2ECQNDoKw4RbmP3NNy81dVL0Ar0QXOmH1Aj0 D9yYiPz41E1emPUxfQpXCrNM6+TGkydW2H3Gt+TXWcsVZtv0wPPwcYjWkoyDvfyo IuUztUPImmuwSlbiHziIJNcERnHscUo/WW7a33sby4QDV5LrMlcXEZfTBhLuaa3+ S1NbXkTZS47mXJos4d/gRuhqdgi0mjJiADHqp+bQdowSHyiMyqg= =H/w4 -----END PGP SIGNATURE----- Merge tag 'clk-meson-dt-v5.4-3' of git://github.com/BayLibre/clk-meson into v5.4/dt64-2 Amlogic clk dt bindings changes for v5.4 - 3rd round * add sm1 peripheral controller bindings	2019-08-29 16:12:46 -07:00
Kevin Hilman	77657b805b	soc: amlogic: updates for v5.4 (round 2) ... - add power domain controller -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl1oWskACgkQWTcYmtP7 xmV37Q//d2oS1HQwhD9KaXztl75Ea10UY/k+Um9WAaVRifZLueYZWzhdqs/9r5pD AK9saIoVALBMJkcBZfCQS5/Z+R5B8WKOUeO0QYbB4WlX3VjRllADHLyxHYH2YbMa gIHONWnSPtiEqbjDKTM848FNWlUIgeAt0p9kble+Eet3gZL2B/EtmqnXMhtg5wbg ONOEYaLpVhFCdk1nibK49rwDwOzlhoVJOMLIdyw6b/mc0ekcIMgqR0HibJ8cjhO8 zEuOptlmsh8g1JSGI8UU2OnC9Dm7j51k+hGKGKyotdplfc+8Gar/tzWcsLzMenjl 0RuvoJoHgh5tEqiTKmrBxtXr0F5SrK83Ku0VT72wm74ipLs80PIZf3Zu73ZVJzUX qRFnW7JuFqbiWdSWBP06vtrZ/9hTart/XmtfWbZMe4x3ROP/cSAxPSXhB8iK5cPe R0//zxhrcEo5drRAqQgAqMkEKYTFW6HmNPVHZyJzfvpZovUICXnXn6nf2wsyGVXG D3XdbqhS9ev5VZEpMgyMnwHcN+Y8/dNHafoRufKKzkbOFAPmmMRLLRb4xcdCuUMF FOMx7Su3xS4SJtUcOmCvhBjBIjFjGYWFN2CVbt8edNOhBGMyzCM6NC16j6hwqzHV 9bURMqf0j+KpD7Hrk7aT2gkW6CpRS6anKQKe86yCn32JfLTJxlQ= =0F6y -----END PGP SIGNATURE----- Merge tag 'amlogic-drivers-2.1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into v5.4/dt64-2 soc: amlogic: updates for v5.4 (round 2) - add power domain controller	2019-08-29 16:11:30 -07:00
Neil Armstrong	bd9eccf140	dt-bindings: power: add Amlogic Everything-Else power domains bindings ... Add the bindings for the Amlogic Everything-Else power domains, controlling the Everything-Else peripherals power domains. The bindings targets the Amlogic G12A and SM1 compatible SoCs, support for earlier SoCs will be added later. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>	2019-08-29 16:05:01 -07:00
Lokesh Vutla	7548205ae5	dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E ... Add pinctrl macros for J721E SoC. These macro definitions are similar to that of AM6, but adding new definitions to avoid any naming confusions in the soc dts files. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>	2019-08-29 16:04:59 +03:00
Lokesh Vutla	9e46598822	dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access ... TISCI protocol supports for enabling the device either with exclusive permissions for the requesting host or with sharing across the hosts. There are certain devices which are exclusive to Linux context and there are certain devices that are shared across different host contexts. So add support for getting this information from DT by increasing the power-domain cells to 2. Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>	2019-08-26 20:00:40 -07:00
Tony Lindgren	fd56837494	clk: ti: add clkctrl data omap5 sgx ... Looks like we have sgx clock missing currently so let's add it. Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>	2019-08-26 08:47:07 -07:00
Neil Armstrong	cda4569137	dt-bindings: clk: meson: add sm1 periph clock controller bindings ... Update the documentation to support clock driver for the Amlogic SM1 SoC and expose the GP1, DSU and the CPU 1, 2 & 3 clocks. SM1 clock tree is very close, the main differences are : - each CPU core can achieve a different frequency, albeit a common PLL - a similar tree as the clock tree has been added for the DynamIQ Shared Unit - has a new GP1 PLL used for the DynamIQ Shared Unit - SM1 has additional clocks like for CSI, NanoQ an other components Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2019-08-26 11:00:15 +02:00
Martin Blumenstingl	088e88be5a	dt-bindings: phy: add binding for the Lantiq VRX200 and ARX300 PCIe PHYs ... Add the bindings for the PCIe PHY on Lantiq VRX200 and ARX300 SoCs. The IP block contains settings for the PHY and a PLL. The PLL mode is configurable through a dedicated #phy-cell in .dts. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>	2019-08-23 09:40:46 +05:30
Ryder Lee	cc212241df	arm: dts: mediatek: add basic support for MT7629 SoC ... This adds basic support for MT7629 reference board. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>	2019-08-22 11:22:17 +02:00
Peter Griffin	5f912f7ced	dt-bindings: reset: hisilicon: Add ao reset controller ... This is required to bring Mali450 gpu out of reset. Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>	2019-08-20 08:13:47 -05:00
Jerome Brunet	0688587a71	dt-bindings: clock: meson: add resets to the audio clock controller ... Add the documentation and bindings for the resets provided by the g12a audio clock controller Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2019-08-20 11:50:30 +02:00
Leonard Crestez	be378b6007	clk: imx8mn: Add GIC clock ... This is enabled by default but if it's not explicitly defined and marked as critical then its parent might get turned off. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>	2019-08-19 13:54:40 +02:00
Raag Jadav	ff461ebfd4	regulator: act8865 regulator modes and suspend states ... Add documentation for act8865 regulator modes and suspend states. Add active-semi,8865-regulator.h file for device tree binding constants for act8865 regulators. Signed-off-by: Raag Jadav <raagjadav@gmail.com> Link: https://lore.kernel.org/r/1565721176-8955-3-git-send-email-raagjadav@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>	2019-08-15 18:00:38 +01:00
Marek Behún	5bc7f990cd	bus: Add support for Moxtet bus ... On the Turris Mox router different modules can be connected to the main CPU board: currently a module with a SFP cage, a module with MiniPCIe connector, a PCIe pass-through MiniPCIe connector module, a 4-port switch module, an 8-port switch module, and a 4-port USB3 module. For example: [CPU]-[PCIe-pass-through]-[PCIe]-[8-port switch]-[8-port switch]-[SFP] Each of this modules has an input and output shift register, and these are connected via SPI to the CPU board. Via SPI we are able to discover which modules are connected, in which order, and we can also read some information about the modules (eg. their interrupt status), and configure them. From each module 8 bits can be read (of which low 4 bits identify the module) and 8 bits can be written. For example from the module with a SFP cage we can read the LOS, TX-FAULT and MOD-DEF0 signals, while we can write TX-DISABLE and RATE-SELECT signals. This driver creates a new bus type, called "moxtet". For each Mox module it finds via SPI, it creates a new device on the moxtet bus so that drivers can be written for them. It also implements a virtual interrupt controller for the modules which send their interrupt status over the SPI shift register. These modules do this in addition to sending their interrupt status via the shared interrupt line. When the shared interrupt is triggered, we read from the shift register and handle IRQs for all devices which are in interrupt. The topology of how Mox modules are connected can then be read by listing /sys/bus/moxtet/devices. Link: https://lore.kernel.org/r/20190812161118.21476-2-marek.behun@nic.cz Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2019-08-14 15:30:35 +02:00
Georgi Djakov	24f516ebba	dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings ... The Qualcomm QCS404 platform has several buses that could be controlled and tuned according to the bandwidth demand. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>	2019-08-13 23:03:24 +03:00
Suman Anna	d220540795	dt-bindings: ti-sysc: Add SPDX license identifier ... Add the appropriate SPDX license identifier to the common TI sysc bindings header file. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>	2019-08-13 04:13:32 -07:00
Icenowy Zheng	0ed4c252bf	clk: sunxi-ng: v3s: add Allwinner V3 support ... Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>	2019-08-12 10:05:48 +02:00
Neil Armstrong	85ab9d9546	clk: meson: g12a: expose CPUB clock ID for G12B ... Expose the CPUB clock id to add DVFS to the second CPU cluster of the Amlogic G12B SoC. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2019-08-09 12:12:37 +02:00