Despite what the HVS documentation indicates, the VC4 does not actually
support SAND tiling modes for any RGB format and only semiplanar YUV420
formats (NV12/NV21) can be used in these tiling modes.
The driver currently claims to support RGB formats for the associated
modifiers, so remove them from the supported list in the
format_mod_supported helper for RGB formats.
Remove further checks that are no longer necessary along the way, since
semi-planar YUV420 formats support every SAND tiling mode.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214141218.12671-1-paul.kocialkowski@bootlin.com
Applyin margins is just a matter of scaling all planes appropriately
and adjusting the CRTC X/Y offset to account for the
left/right/top/bottom borders.
Create a vc4_plane_margins_adj() function doing that and call it from
vc4_plane_setup_clipping_and_scaling() so that we are ready to attach
margins properties to the HDMI connector.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-5-boris.brezillon@bootlin.com
Add support for X/Y reflection when the plane is using linear or
T-tiled formats. X/Y reflection hasn't been tested on SAND formats, so
we reject them until proper testing/debugging has been done.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207083606.15449-2-boris.brezillon@bootlin.com
Now that async update has been reworked to allow scaled planes to be
updated asynchronously when the scaling params do not change, we can
remove the NO_SCALING constraint on cursor planes.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-5-boris.brezillon@bootlin.com
vc4_plane_atomic_async_check() was only based on the
state->{crtc,src}_{w,h} which was fine since scaling was not allowed on
the cursor plane.
We are about to change that to properly support underscan, and, in order
to make the async check more reliable, we call vc4_plane_mode_set()
from there and check that only the pos0, pos2 and ptr0 entries in the
dlist have changed.
In vc4_plane_atomic_async_update(), we no longer call
vc4_plane_atomic_check() since vc4_plane_mode_set() has already been
called in vc4_plane_atomic_async_check(), and we don't need to allocate
a new LBM region (we reuse the one from the current state).
Note that we now have to manually update each field of the current
plane state since it's no longer updated in place (not sure we have
to sync all of them, but it's harmless if we do).
We also drop the vc4_plane_async_set_fb() call (ptr0 dlist entry has
been properly updated in vc4_plane_mode_set())
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-4-boris.brezillon@bootlin.com
We are about to use vc4_plane_mode_set() in the async check path, but
async check can decide that async update is not possible and force the
driver to fallback to a sync update.
All the checks that have been done on the plane state during async check
stay valid, and checking it again is not necessary. Add a ->checked
field to vc4_plane_state, and use it to track the status of the state
(checked or not).
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-3-boris.brezillon@bootlin.com
We are about to use vc4_plane_mode_set() in the async check path, and
async updates require that LBM size stay the same since they reuse the
LBM from the previous state. So we definitely don't want to allocate a
new LBM region that we know for sure will be free right away.
Move the LBM allocation out of vc4_plane_mode_set() and call the new
function (vc4_plane_update_lbm()) from vc4_plane_atomic_check().
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-2-boris.brezillon@bootlin.com
LBM is not needed when vertical scaling is disabled. Return 0 in this
case to avoid allocating LBM memory that will anyway be unused.
While at it, drop the test on ->is_unity which is now redundant.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-1-boris.brezillon@bootlin.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlv7H/seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhasH/AvNibkzTAPQR7jE
r/R7NIaFUdPpaHYpLpoYIdSWkqpeWtN3q4eldJKWcpFCaE83EzDVu1PRw79rt/lm
JIYbZ2SZWbTB7d2TLEiEF2bFXr+OF8MVc1tSAsP5xTMvV6mIz7+i2xr9R0D4YrKY
ejd+ExF3HimuRf557Uey1MGsRIhedHsHjHbWjvR1MuKzvUv9nAL+1E2KJbfPXacp
LGXElCYcPXoKw+GxMS7C28idgLoEJoS/eVieRiMGsGlgEe/MuaNMU+GRLMde9lI0
c/G/4uumJTHVY7npOjuNt1+2FoLVt8oLlhPcB06R7FIwJN+TupLQifqBkIe2saT6
R6ExonQ=
=+/RR
-----END PGP SIGNATURE-----
Merge v4.20-rc4 into drm-next
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
vc4_plane_atomic_async_update() calls vc4_plane_atomic_check()
which in turn calls vc4_plane_setup_clipping_and_scaling(), and since
commit 58a6a36fe8 ("drm/vc4: Use
drm_atomic_helper_check_plane_state() to simplify the logic"), this
function accesses plane_state->state which will be NULL when called
from the async update path because we're passing the current plane
state, and plane_state->state has been assigned to NULL in
drm_atomic_helper_swap_state().
Pass the new state instead of the current one (the new state has
->state set to a non-NULL value).
Fixes: 58a6a36fe8 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic")
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-1-boris.brezillon@bootlin.com
For the YUV conversion to work properly, ->x_scaling[1] should never
be set to VC4_SCALING_NONE, but vc4_get_scaling_mode() might return
VC4_SCALING_NONE if the horizontal scaling ratio exactly matches the
horizontal subsampling factor. Add a test to turn VC4_SCALING_NONE
into VC4_SCALING_PPF when that happens.
The old ->x_scaling[0] adjustment is dropped as I couldn't find any
mention to this constraint in the spec and it's proven to be
unnecessary (I tested various multi-planar YUV formats with scaling
disabled, and all of them worked fine without this adjustment).
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109102633.32603-1-boris.brezillon@bootlin.com
When vc4_plane_state is duplicated ->is_yuv is left assigned to its
previous value, and we never set it back to false when switching to
a non-YUV format.
Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch
of the vc4_plane_setup_clipping_and_scaling() function.
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com
X/Y positioning of T-format buffers is quite tricky and the current
implementation was failing to position a plane using this format
correctly when the CRTC X, Y or both X and Y offsets were negative.
It was also failing when the SRC X/Y offsets were != 0.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-5-boris.brezillon@bootlin.com
The offset adjustment depends on the framebuffer modified, so let's
just move this operation in the DRM_FORMAT_MOD_LINEAR case inside
vc4_plane_mode_set().
This we'll be able to fix offset calculation for
DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED and DRM_FORMAT_MOD_BROADCOM_SANDXXX.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-4-boris.brezillon@bootlin.com
drm_atomic_helper_check_plane_state() takes care of checking the
scaling capabilities and calculating the clipped X/Y offsets for us.
Rely on this function instead of open-coding the logic.
Incidentally, it seems to fix a problem we had with negative X/Y
positioning of YUV planes.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-3-boris.brezillon@bootlin.com
drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).
Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.
v2: Rebase.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-14-daniel.vetter@ffwll.ch
When there's no scaling requested ->is_unity should be true no matter
the format.
Also, when no scaling is requested and we have a multi-planar YUV
format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only
set ->x_scaling[0] to VC4_SCALING_PPF.
Doing this fixes an hardly visible artifact (seen when using modetest
and a rather big overlay plane in YUV420).
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
This leaves all the commit/check and state handling in drm_atomic.c,
while pulling all the uapi glue and the huge ioctl itself into a
seprate file.
This seems to almost perfectly split the rather big drm_atomic.c file
into 2 equal sizes.
Also adjust the kerneldoc and type a very terse overview text.
v2: Rebase.
v3: Fix tiny typo.
v4:
- Fixup armada, newly converted atomic driver hooray!
- Fixup msm/dpu1, newly added too.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
-----BEGIN PGP SIGNATURE-----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=g9rD
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.19.
Rob has some new hardware support for new qualcomm hw that I'll send
along separately. This has the display part of it, the remaining pull
is for the acceleration engine.
This also contains a wound-wait/wait-die mutex rework, Peter has acked
it for merging via my tree.
Otherwise mostly the usual level of activity. Summary:
core:
- Wound-wait/wait-die mutex rework
- Add writeback connector type
- Add "content type" property for HDMI
- Move GEM bo to drm_framebuffer
- Initial gpu scheduler documentation
- GPU scheduler fixes for dying processes
- Console deferred fbcon takeover support
- Displayport support for CEC tunneling over AUX
panel:
- otm8009a panel driver fixes
- Innolux TV123WAM and G070Y2-L01 panel driver
- Ilitek ILI9881c panel driver
- Rocktech RK070ER9427 LCD
- EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
- DLC DLC0700YZG-1
- BOE HV070WSA-100
- newhaven, nhd-4.3-480272ef-atxl LCD
- DataImage SCF0700C48GGU18
- Sharp LQ035Q7DB03
- p079zca: Refactor to support multiple panels
tinydrm:
- ILI9341 display panel
New driver:
- vkms - virtual kms driver to testing.
i915:
- Icelake:
Display enablement
DSI support
IRQ support
Powerwell support
- GPU reset fixes and improvements
- Full ppgtt support refactoring
- PSR fixes and improvements
- Execlist improvments
- GuC related fixes
amdgpu:
- Initial amdgpu documentation
- JPEG engine support on VCN
- CIK uses powerplay by default
- Move to using core PCIE functionality for gens/lanes
- DC/Powerplay interface rework
- Stutter mode support for RV
- Vega12 Powerplay updates
- GFXOFF fixes
- GPUVM fault debugging
- Vega12 GFXOFF
- DC improvements
- DC i2c/aux changes
- UVD 7.2 fixes
- Powerplay fixes for Polaris12, CZ/ST
- command submission bo_list fixes
amdkfd:
- Raven support
- Power management fixes
udl:
- Cleanups and fixes
nouveau:
- misc fixes and cleanups.
msm:
- DPU1 support display controller in sdm845
- GPU coredump support.
vmwgfx:
- Atomic modesetting validation fixes
- Support for multisample surfaces
armada:
- Atomic modesetting support completed.
exynos:
- IPPv2 fixes
- Move g2d to component framework
- Suspend/resume support cleanups
- Driver cleanups
imx:
- CSI configuration improvements
- Driver cleanups
- Use atomic suspend/resume helpers
- ipu-v3 V4L2 XRGB32/XBGR32 support
pl111:
- Add Nomadik LCDC variant
v3d:
- GPU scheduler jobs management
sun4i:
- R40 display engine support
- TCON TOP driver
mediatek:
- MT2712 SoC support
rockchip:
- vop fixes
omapdrm:
- Workaround for DRA7 errata i932
- Fix mm_list locking
mali-dp:
- Writeback implementation
PM improvements
- Internal error reporting debugfs
tilcdc:
- Single fix for deferred probing
hdlcd:
- Teardown fixes
tda998x:
- Converted to a bridge driver.
etnaviv:
- Misc fixes"
* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
drm/scheduler: fix param documentation
drm/i2c: tda998x: correct PLL divider calculation
drm/i2c: tda998x: get rid of private fill_modes function
drm/i2c: tda998x: move mode_valid() to bridge
drm/i2c: tda998x: register bridge outside of component helper
drm/i2c: tda998x: cleanup from previous changes
drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
drm/i2c: tda998x: convert to bridge driver
drm/scheduler: fix timeout worker setup for out of order job completions
drm/amd/display: display connected to dp-1 does not light up
drm/amd/display: update clk for various HDMI color depths
drm/amd/display: program display clock on cache match
drm/amd/display: Add NULL check for enabling dp ss
drm/amd/display: add vbios table check for enabling dp ss
drm/amd/display: Don't share clk source between DP and HDMI
drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
drm/amd/display: Use calculated disp_clk_khz value for dce110
drm/amd/display: Implement custom degamma lut on dcn
drm/amd/display: Destroy aux_engines only once
...
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-10-alexandru-cosmin.gheorghe@arm.com
This is needed to ensure ->is_unity is correct when the plane was
previously configured to output a multi-planar format with scaling
enabled, and is then being reconfigured to output a uniplanar format.
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com
In commits:
34a2ab5e06 ("drm: Add acquire ctx parameter to ->update_plane")
1931529448 ("drm: Add acquire ctx parameter to ->plane_disable")
a pointer to a drm_modeset_acquire_ctx structure was added as an
argument to the method prototypes. The transitional helpers are
supposed to be directly plugged in as implementations of these
methods, but doing so generates a warning. Add the missing
argument.
A number of buggy users were added for drm_plane_helper_disable()
which need to be fixed up for this change, which we do by passing
a NULL ctx argument.
Fixes: 1931529448 ("drm: Add acquire ctx parameter to ->plane_disable")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/E1fa1Zr-0005gT-VF@rmk-PC.armlinux.org.uk
We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
This is the format generated by VC4's H.264 engine, and preferred by
the ISP as well. By displaying SAND buffers directly, we can avoid
needing to use the ISP to rewrite the SAND H.264 output to linear
before display.
This is a joint effort by Dave Stevenson (who wrote the initial patch
and DRM demo) and Eric Anholt (drm_fourcc.h generalization, safety
checks, RGBA support).
v2: Make the parameter macro give all of the middle 48 bits (suggested
by Daniels). Fix fourcc_mod_broadcom_mod()'s bits/shift being
swapped. Mark NV12/21 as supported, not YUV420.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com> (v1)
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@anholt.net
Daniel's format_mod_supported() patch predated Dave's for NV21/61, and
I didn't catch that when rebasing. This is a problem since the
formats are now getting validated before being passed to the driver's
atomic hooks.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.org>
Fixes: 423ad7b3cb ("drm/vc4: Advertise supported modifiers for planes")
Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-2-eric@anholt.net
-----BEGIN PGP SIGNATURE-----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=4NJV
-----END PGP SIGNATURE-----
Merge drm-fixes-for-v4.17-rc6-urgent into drm-next
Need to backmerge some nouveau fixes to reduce
the nouveau -next conflicts a lot.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The vc4 HVS uses an internal RGB888 representation of the frames, and will
by default expand formats using a lower depth using zeros.
This causes an issue when we try to use other compositing software such as
pixman that fill the missing bits by repeating the higher significant bits.
As such, we can't check the display output in a reliable way by doing a
software composition and an hardware one and compare both.
To prevent this, force the same behaviour so that we can do such things.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517133759.25626-1-maxime.ripard@bootlin.com
The HVS supports mixing fixed alpha with per-pixel alpha or
setting a fixed plane alpha in case there is no per-pixel information.
This allows us to support the generic DRM plane alpha property.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421000954.18936-1-stschake@gmail.com
Add support for async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
vc4_update_plane() did but through atomic.
v7: Place the drm_atomic_set_fb_for_plane() call after the new
FB has been applied to the HW to avoid possible use-after-free
issues
v6: add missing drm_atomic_set_fb_for_plane() in
vc4_plane_atomic_async_update() (Boris Brezillon)
v5: add missing call to vc4_plane_atomic_check() (Eric Anholt)
v4: add drm_atomic_helper_async() commit (Eric Anholt)
v3: move size checks back to drivers (Ville Syrjälä)
v2: move fb setting to core and use new state (Eric Anholt)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330085445.31726-1-boris.brezillon@bootlin.com
Considering a single plane only, we have to enable background color
when the plane has an alpha format and could be blending from the
background or when it doesn't cover the entire screen.
Changes from v1:
- Drop unrelated change
- Move needs_bg_fill to plane state
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-3-git-send-email-stschake@gmail.com
Alpha formats in DRM are assumed to be premultiplied, so we should be
setting the PREMULT bit in the plane configuration for HVS.
Changes from v1:
- Use correct has_alpha
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-2-git-send-email-stschake@gmail.com
The IN_FORMATS blob allows the kernel to advertise to userspace which
format/modifier combinations are supported, per plane. Use this to
advertise that we support both T_TILED and linear.
v2:
- Only advertise T_TILED for RGB (Eric)
- Actually turn on allow_fb_modifiers (Eric)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/170828/
The hardware has enums for altering the Cr and Cb order,
so use this instead of having a flag which swaps the
order the pointers are presented to the hardware
(that only worked for 3 plane formats anyway).
Explicitly sets .pixel_order in each case, rather than
relying on then default XYCBCR order being a value 0.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/563872b69c1e5df142cb15ebfca7f20056b8a64c.1510841336.git.dave.stevenson@raspberrypi.org
This ioctl will allow us to purge inactive userspace buffers when the
system is running out of contiguous memory.
For now, the purge logic is rather dumb in that it does not try to
release only the amount of BO needed to meet the last CMA alloc request
but instead purges all objects placed in the purgeable pool as soon as
we experience a CMA allocation failure.
Note that the in-kernel BO cache is always purged before the purgeable
cache because those objects are known to be unused while objects marked
as purgeable by a userspace application/library might have to be
restored when they are marked back as unpurgeable, which can be
expensive.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019125748.3152-1-boris.brezillon@free-electrons.com
The documentation said to use src_w here, and I didn't consider that
we actually needed to be using pitch somewhere in our setup. Fixes
scanout on my DSI panel when X11 does initial setup with 1920x1080
HDMI and 800x480 DSI both at 0,0 of the same framebuffer.
v2: Add some comments requested by Boris
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 98830d91da ("drm/vc4: Add T-format scanout support.")
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
This way drm_atomic_helper_wait_for_fences() will actually do
something. The vc4_seqno_cb has been doing the fence waits on V3D
manually, so far.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621185002.28563-1-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
