AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-12 06:16:40 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
480,344 Commits 1 Branch 0 Tags 2 GiB
64a7507a74
Commit Graph

6804 Commits

Author SHA1 Message Date
Ye He
64a7507a74 ARM: dts: prima2: add node for Performance Monitor Unit 
It enables Performance Monitor Unit on CSR SiRFprimaII.

Signed-off-by: Ye He <ye.he@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
 2014-11-25 18:46:43 +08:00
Rongjun Ying
110afb8b42 ARM: dts: atlas6: Add I2S external clock input pingroup 
The I2S controller can use the external clock as reference clock with
master mode. But based on different hardware or software design, this
external clock might be needed or not needed.
So the external input pin can be an independent pinctrl group, and the
card driver can decice to get it or not.

Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
 2014-11-25 18:46:43 +08:00
Rongjun Ying
5427b0d2bf ARM: dts: atlas6: add a separate pingroup for i2s mclk output 
The I2S controller can output mclk to external audio codec. But by
hardware design, some codecs need mclk and some codecs do not need
mclk. So the mclk pin can be an independent pinctrl group, and the
card driver can get it or not based on boards.

Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
 2014-11-25 18:46:42 +08:00
Rongjun Ying
e6067f29af ARM: dts: prima2: add I2S 2ch, 6ch, nodin, mclk groups 
we have done that for atlas6 in commit ed36c1a, 086b8904 etc. here we
do same things for prima2.

Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
 2014-11-25 18:46:42 +08:00
Olof Johansson
57764512ce Merge tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into fixes 
Merge "qcom DT changes for v3.18-3" from Kumar Gala:

Qualcomm ARM Based Device Tree Updates for v3.18-3

* Added Board support for CM-QS600 and Sony Xperia Z1 phone
* Added SATA support on IPQ8064/AP148

* tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: dts: qcom: add CM-QS600 board
  ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone
  ARM: dts: qcom: Add SATA support on IPQ8064/AP148
 2014-10-19 13:39:08 -07:00
Olof Johansson
e29c64865f 2nd Samsung fixes for v3.18 
- Explicitly set dr_mode on exynos5800-peach-pi, exynos5420-peach-pit
   and exynos5420-arndale-octa boards, because the USB dwc3 controller
   will not work properly without dr_mode as host on above boards if
   the USB host and gadget are enabled in kernel configuration both.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJUQFJ6AAoJEA0Cl+kVi2xqW/wP/2sWvJRYaPgDvFk2NsTn12Tl
 zdhbVRhnq/nskQ0Hg/YZ5QZMWbYo+gHUXuRrvGS6qRHLiQKdpLS1HvVZny+tG+j/
 iJZiPNrjFPAjHe0os2agiiD+Y6HWcEwWC/VZIWXreHSlY8+4em6xmcyMpu9Mpzhp
 GswN5eAU2suLZiliwBlCrcwuDsaYMmlM7fSdtVE7L9KWB27IGCwILHcPQR5wVfsO
 0n3osqsZZvYv3b/VYkBeiOcAaGjAF1H0y12/hZ/kVHV35vAiNzUjxvWLHNZSuSXb
 EMYnDuJfa2PnaEd8m9KfgDifvcaovhZeHreqtkGrumJAVJMVxa8R4/xWaKUnLOaB
 Cn7HlZP/MFhLPoFREVV/70jbjikdhEueD5J7W3C1c8wUpnwmOORCt/raXnK+ABuq
 h52wkl32Hc1QqO+RprHHCJNYHpGlysjMyiXRvy8qGQHhdWtk/1ttbhLPZMBoEN5h
 auCi55EN/W5gGnfD+mWmN6aAjreyesWflhShrcqFWn748MSDa/w4Qh17/w3HtLbd
 ED0GHJHf/hA6c0ixnLsMrgBj1rXpOdweZEN0HLWdAGDVC3RBdH74kDtyy3yJiAfI
 QdMw14dZc9Adk4gxs34xSvmFxJHlHjXTmhzO/2inhNMwENbkD+UOzQ36x4Skpc37
 hE9imV/9FjCr8UA0aBi6
 =Arc+
 -----END PGP SIGNATURE-----

Merge tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

Pull more fixes from Kukjin Kim:

2nd Samsung fixes for v3.18
- Explicitly set dr_mode on exynos5800-peach-pi, exynos5420-peach-pit
  and exynos5420-arndale-octa boards, because the USB dwc3 controller
  will not work properly without dr_mode as host on above boards if
  the USB host and gadget are enabled in kernel configuration both.

* tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa
  ARM: dts: Explicitly set dr_mode on exynos Peach boards

Signed-off-by: Olof Johansson <olof@lixom.net>
 2014-10-19 13:34:52 -07:00
Sjoerd Simons
4e03394e93 ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa 
Explicitly set the dr_mode for the second dwc3 controller on the
Arndale Octa board to host mode. This is required to ensure the
controller is initialized in the right mode if the kernel is build
with USB gadget support.

Reported-By: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
 2014-10-17 08:17:35 +09:00
Sjoerd Simons
e1c69efc52 ARM: dts: Explicitly set dr_mode on exynos Peach boards 
In case the optional dr_mode property isn't set in the dwc3 nodes the
the controller will go into OTG mode if both USB host and USB gadget
functionality are enabled in the kernel configuration. Unfortunately
this results in USB not working on exynos5420-peach-pit and
exynos5800-peach-pi with such a kernel configuration unless manually
change the mode. To resolve that explicitly configure the dual role
mode as host.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
 2014-10-17 08:17:35 +09:00
Mike Rapoport
7dac24bdc1 ARM: dts: qcom: add CM-QS600 board 
CM-QS600 is a APQ8064 based computer on module.
The details are available at
http://compulab.co.il/products/computer-on-modules/cm-qs600/

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
 2014-10-16 02:48:36 -05:00
Tim Bird
71b5235ab6 ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone 
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami).
This first version of the DTS supports just a serial console.

Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
 2014-10-16 02:48:20 -05:00
Kumar Gala
e512448f6e ARM: dts: qcom: Add SATA support on IPQ8064/AP148 
Add SATA PHY and SATA AHCI controller nodes to device tree to enable
generic ahci support on the IPQ8064/AP148 board.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
 2014-10-16 02:44:47 -05:00
Olof Johansson
e17fd8e58a Samsung fixes for v3.18 
- fix ifdef around cpu_*_do_[suspend, resume] ops to check
   CONFIG_ARM_CPU_SUSPEND and not CONFIG_PM_SLEEP
 - fix exynos_defconfig build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n
 - fix enabling Samsung PM debug functionality due to recently merged
   patches and previous merge conflicts
 - fix pull-up setting in sd4_width8 pin group for exynos4x12
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJUPa89AAoJEA0Cl+kVi2xqDagP+gJMTHKBbGi6VUAGnV+6ojCa
 LgXjaCKfPlHFJ9C4d8OvW2g3Fc+3Ns/Tm2s93AWNz+NEJo4Ft5OZW+jHzIMF1Viz
 lAewxzoAgq5CeseyvmzUQ5aCVglzCGvgQ6WN9Lq1sRqD8BywHYDRpmrxmDGjGN0D
 51pIxgEJLRYsOsJVhIx1wBBWTxaQH2ViqACsak+HJkw0WzoDQUVzSv85NlzaMwyR
 55rikCPDC/RbSLI3McyNWx+BJ0bBy6HqXkfhFsTmROa0ewjPAR+miEKvF6Jqk6ij
 IZKpfD6hiHNuyhyQEpY3Mw5sOoleVLCuAM5x1f883b/ufISARGTZ0Zhb5+UQ2Rdh
 bf5bZw+ZuhMCZioN2tUgBCOUwRC/G+PGzy82Z46FQhp6e21VTwY345HhZfvIKHHy
 10veTu8RGFm0Y2VL6rENHhWN6tZzOrmM0oeN4nEnZQfXy7tsRy6qFLYv30wuY2y4
 6oPK6Vs1iB0BAz8HioAuupIFn8ZkfO4AoCW+Gu94Gt3n0dTOFP7JIBgjycvSxLb2
 FV2Zt/DXxjAj+ld/jf6lOIIYw/0JyaB58QeLKdASQxmiUbUuoQt9STe/c6MS1miy
 j8BPM4ILuhak+0aFUgSRZiewoGyqXEShdinmdJ1B/k1JVmFiwgEOjT7tQTQeEiCn
 4OPzu6fIYau0CdUqMy7w
 =6hVm
 -----END PGP SIGNATURE-----

Merge tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

Merge "Samsung fixes for v3.18" from Kukjin Kim:

- fix ifdef around cpu_*_do_[suspend, resume] ops to check
  CONFIG_ARM_CPU_SUSPEND and not CONFIG_PM_SLEEP
- fix exynos_defconfig build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n
- fix enabling Samsung PM debug functionality due to recently merged
  patches and previous merge conflicts
- fix pull-up setting in sd4_width8 pin group for exynos4x12

* tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops
  ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n
  ARM: SAMSUNG: Restore Samsung PM Debug functionality
  ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12

Signed-off-by: Olof Johansson <olof@lixom.net>
 2014-10-14 23:31:13 -07:00
Olof Johansson
6d81dc87c0 Two omap fixes for issues noticed during the merge window: 
- We need to enable ARM errata 430973 for omap3
 
 - The smc91x on some early n900 boards need to be disabled
   for now until the dependencies to specific a bootloader
   version are fixed
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUOEX4AAoJEBvUPslcq6VzYz0P/3kudc/RoBxHnkcR2ii3MAPy
 BuQHcN/QFe8A8WO+fnjX+Pj5hf/CtajIrZlzq+5z6U1MKBwbAQbeE/uxAENgEwd7
 01pVxYxWXs2caIaCkcMXN0qcwizgMRBTGQr8BMwtcXobkjfrOcllfj0GFE7xLsHC
 j9cmpwB2Dw9Xip//dQZnHPhAjabI5/5BMlRi1KWUVngQJeiB0jasrWtWpi8pzFI0
 K59MPoiNCzhXRvSdsh5eLDJTFSMaLyyvtKONlZDM7fZHfaqCHmz9B5agd35JnzDb
 uL8x74QDIIDsm5hJJihTb+HvkY8+Jnj+QV7WiJTcby+pF5xayF7IsrM2ZJmwDsBI
 3LsSRhOqDGQjEw8TOttGg34Kcz65j4fKJEw2K42D40T9LvNs0r0mOwKE9/xMJ3mC
 Xny/iUUCeNdCK+xQJpj+LWGCdeBnOlFjCuG7GWmrw3J2Ynegwf/KQ5WLqKb8giH9
 ZVdgrNeYEMoHQOQRzqwl/N4ie0cIu39E9IPbh8ybglXX49HYNoTtkJNYi4/6nJTt
 50VT9aydPgHtgcnb3Mb+yWnrERaZNPvocDil5OBgmO2+Rbx51f51TyxyYgWGf+xM
 vfOPVxCf9muKt2SaMTlQYMiWFrEHMyujvir8vfxlOdEyaErRhwmP2oeDXC/v9AXE
 /AK3bdGe3FJio86/wIoB
 =B9g8
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-v3.18-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "Two omap fixes for v3.18 merge window" from Tony Lindgren:

Two omap fixes for issues noticed during the merge window:

- We need to enable ARM errata 430973 for omap3

- The smc91x on some early n900 boards need to be disabled
  for now until the dependencies to specific a bootloader
  version are fixed

* tag 'fixes-for-v3.18-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Disable smc91x on n900 until bootloader dependency is removed
  ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3

Signed-off-by: Olof Johansson <olof@lixom.net>
 2014-10-14 23:30:36 -07:00
Linus Torvalds
c0fa2373f8 The clk tree changes for 3.18 are dominated by clock drivers. Mostly 
fixes and enhancements to existing drivers as well as new drivers. This
 tag contains a bit more arch code than I usually take due to some OMAP2+
 changes. Additionally it contains the restart notifier handlers which
 are merged as a dependency into several trees.
 
 The PXA changes are the only messy part. Due to having a stable tree I
 had to revert one patch and follow up with one more fix near the tip of
 this tag. Some dead code is introduced but it will soon become live code
 after 3.18-rc1 is released as the rest of the PXA family is converted
 over to the common clock framework.
 
 Another trend in this tag is that multiple vendors have started to push
 the complexity of changing their CPU frequency into the clock driver,
 whereas this used to be done in CPUfreq drivers.
 
 Changes to the clk core include a generic gpio-clock type and a
 clk_set_phase() function added to the top-level clk.h api. Due to some
 confusion on the fbdev mailing list the kernel boot parameters
 documentation was updated to further explain the clk_ignore_unused
 parameter, which is often required by users of the simplefb driver.
 Finally some fixes to the locking around the clock debugfs stuff was
 done to prevent deadlocks when interacting with other subsystems.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJUMu8gAAoJEDqPOy9afJhJ+GwP/3aU1PzhEPooZ3sZ5hkhmRYc
 RTzNZAODuOGbGnAiNQcr8XW3LJ6wKz5TSzzUC8IQkTcYM1Tsc7s5B6v+nMOkR2Jh
 sfrlnDEV/dsW9/3QADFuBowCaZdsaZnHn96RDhTmyDlPjh4HRR2k8ITT+TREbFrd
 cHDWy4QnI0u4NzhKtitvgW2770HyBpr31v5IdoRhVi5whoiBNL49BPwhwDWhwZVe
 w6qvc0jV8FK9Ra/Q7Vw6r3tiKkpO/upqVFDrsO831mp2qDcQvtOgNW9H2fjcobaX
 3/KCbs1TZs39e71RsEGwCvmCudXkTgO1wUJ86MuCLHeb2o78Vx8EYie02/RApTOJ
 0KGR+kFouggy2naeH8pXiTZk2HWMCbut6NQ1+AVbea5Em7hgHbYaQN71wVFKR4L7
 QL+TugrIg81fGWSvxoTo6fsbEiKOUdhXvHFWP5etKHL+Ll+7ku05ojHLOZgEEwTf
 zFWSSF4XSFQtuQD1gup0pSfoLs6qVR57l8FsrxfRPK9jGttg5z1wyNkY+585ptim
 eyTn4mkvkx9t9Sx47VRj9WPcPr2SW1w8lTMw1WqKfHG7AEUJHHkRQThQmiU82b47
 dTls4BBZ6sVZ8wj0V4zvnvbmtdYohOmBqNDEYx+a0dzPKstcAJyZgcjWBc13zds4
 rIKKxhiU7jGWH4qnJLrx
 =w2rN
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux

Pull clock tree updates from Mike Turquette:
 "The clk tree changes for 3.18 are dominated by clock drivers.  Mostly
  fixes and enhancements to existing drivers as well as new drivers.
  This tag contains a bit more arch code than I usually take due to some
  OMAP2+ changes.  Additionally it contains the restart notifier
  handlers which are merged as a dependency into several trees.

  The PXA changes are the only messy part.  Due to having a stable tree
  I had to revert one patch and follow up with one more fix near the tip
  of this tag.  Some dead code is introduced but it will soon become
  live code after 3.18-rc1 is released as the rest of the PXA family is
  converted over to the common clock framework.

  Another trend in this tag is that multiple vendors have started to
  push the complexity of changing their CPU frequency into the clock
  driver, whereas this used to be done in CPUfreq drivers.

  Changes to the clk core include a generic gpio-clock type and a
  clk_set_phase() function added to the top-level clk.h api.  Due to
  some confusion on the fbdev mailing list the kernel boot parameters
  documentation was updated to further explain the clk_ignore_unused
  parameter, which is often required by users of the simplefb driver.

  Finally some fixes to the locking around the clock debugfs stuff was
  done to prevent deadlocks when interacting with other subsystems."

* tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits)
  clk: pxa clocks build system fix
  Revert "arm: pxa: Transition pxa27x to clk framework"
  clk: samsung: register restart handlers for s3c2412 and s3c2443
  clk: rockchip: add restart handler
  clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate
  doc/kernel-parameters.txt: clarify clk_ignore_unused
  arm: pxa: Transition pxa27x to clk framework
  dts: add devicetree bindings for pxa27x clocks
  clk: add pxa27x clock drivers
  arm: pxa: add clock pll selection bits
  clk: dts: document pxa clock binding
  clk: add pxa clocks infrastructure
  clk: gpio-gate: Ensure gpiod_ APIs are prototyped
  clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe
  clk: ti: LLVMLinux: Move __init outside of type definition
  clk: ti: consider the fact that of_clk_get() might return an error
  clk: ti: dra7-atl-clock: fix a memory leak
  clk: ti: change clock init to use generic of_clk_init
  clk: hix5hd2: add I2C clocks
  clk: hix5hd2: add watchdog0 clocks
  ...
 2014-10-15 07:05:03 +02:00
Linus Torvalds
2d65a9f48f Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 
Pull drm updates from Dave Airlie:
 "This is the main git pull for the drm,

  I pretty much froze major pulls at -rc5/6 time, and haven't had much
  fallout, so will probably continue doing that.

  Lots of changes all over, big internal header cleanup to make it clear
  drm features are legacy things and what are things that modern KMS
  drivers should be using.  Also big move to use the new generic fences
  in all the TTM drivers.

  core:
        atomic prep work,
        vblank rework changes, allows immediate vblank disables
        major header reworking and cleanups to better delinate legacy
        interfaces from what KMS drivers should be using.
        cursor planes locking fixes

  ttm:
        move to generic fences (affects all TTM drivers)
        ppc64 caching fixes

  radeon:
        userptr support,
        uvd for old asics,
        reset rework for fence changes
        better buffer placement changes,
        dpm feature enablement
        hdmi audio support fixes

  intel:
        Cherryview work,
        180 degree rotation,
        skylake prep work,
        execlist command submission
        full ppgtt prep work
        cursor improvements
        edid caching,
        vdd handling improvements

  nouveau:
        fence reworking
        kepler memory clock work
        gt21x clock work
        fan control improvements
        hdmi infoframe fixes
        DP audio

  ast:
        ppc64 fixes
        caching fix

  rcar:
        rcar-du DT support

  ipuv3:
        prep work for capture support

  msm:
        LVDS support for mdp4, new panel, gpu refactoring

  exynos:
        exynos3250 SoC support, drop bad mmap interface,
        mipi dsi changes, and component match support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits)
  drm/mst: rework payload table allocation to conform better.
  drm/ast: Fix HW cursor image
  drm/radeon/kv: add uvd/vce info to dpm debugfs output
  drm/radeon/ci: add uvd/vce info to dpm debugfs output
  drm/radeon: export reservation_object from dmabuf to ttm
  drm/radeon: cope with foreign fences inside the reservation object
  drm/radeon: cope with foreign fences inside display
  drm/core: use helper to check driver features
  drm/radeon/cik: write gfx ucode version to ucode addr reg
  drm/radeon/si: print full CS when we hit a packet 0
  drm/radeon: remove unecessary includes
  drm/radeon/combios: declare legacy_connector_convert as static
  drm/radeon/atombios: declare connector convert tables as static
  drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table
  drm/radeon/dpm: drop clk/voltage dependency filters for BTC
  drm/radeon/dpm: drop clk/voltage dependency filters for CI
  drm/radeon/dpm: drop clk/voltage dependency filters for SI
  drm/radeon/dpm: drop clk/voltage dependency filters for NI
  drm/radeon: disable audio when we disable hdmi (v2)
  drm/radeon: split audio enable between eg and r600 (v2)
  ...
 2014-10-14 09:39:08 +02:00
Chanwoo Choi
7823047765 ARM: dts: fix wrong compatible string of Exynos3250 RTC dt node 
Fix wrong compatible string of Exynos3250 RTC (Real-Time Clock) dt node.
The RTC of Exynos3250 must need additional source clock (XrtcXTI).

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-10-14 02:18:17 +02:00
Linus Torvalds
f43b179bbd MMC core: 
- Fix SDIO IRQ bug.
  - MMC regulator improvements.
  - Fix slot-gpio card detect bug.
  - Add support for Driver Stage Register.
  - Convert the common MMC OF parser to use GPIO descriptors.
  - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk().
  - Some additional minor fixes.
 
 MMC host:
  - mmci: Support Qualcomm specific DML layer for DMA.
  - dw_mmc: Use common MMC regulators.
  - dw_mmc: Add support for Rock-chips RK3288.
  - tmio: Enable runtime PM support.
  - tmio: Add support for R-Car Gen2 SoCs.
  - tmio: Several fixes and improvements.
  - omap_hsmmc: Removed Balaji from MAINTAINERS.
  - jz4740: add DMA and pre/post support.
  - sdhci: Add support for Intel Braswell.
  - sdhci: Several fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNoFRAAoJEP4mhCVzWIwp+oQP/3a9Rs85+lKwnaDtCotCnvps
 LF2R1qiFbeTgQ4XwJvOctuX0VX3/9/XTRhXq+/txA8phlXzqL5BarbXv8WfLILJJ
 DgXDt/lTeW1NzJ9WYjrmV/rsH7qlbyIq6I+7kXVT15M86Qqx40DF0hSx/idDKDc4
 1ly4trLh0ZeqsM10AR9nu6h/ykVBblHOLSnMZXbBhtmIVshvNg+5KRQkSmwtvTKy
 /DswgxmuM1H1Z0T+qNejh4AZSCvxYPlwN06eqYzpYrGuoPH+SafJVws5o1G9z9SX
 t/A9i1QDxFtvDP0u1twEAYv0R4e3H24OPit3R8p2tgMUw683576DPYkF2A13Yzxj
 c3mYiTAPK8UfRc9kWxCRSkaI38URna1+t7hHRuT/Ha6DBlAvHpRL+wIu+/25XVh+
 vNwOmECtT9DzmL2UP+SHLQtyyy3guAFSsFP5RJzuA5wcYeLpNYobcJJCGuziLNYi
 PZ55O+2HRtd7my4A7NiXAib+CXTPs4VY0XY1tBgaWHl2sxFj/mULILaf+3zxpiWg
 Jc8rWkUMpy1nP1OXUrCRBKbgr/loghUOEM6hozggeisDwpjh7Rm5OXZRj6JdO4QT
 DLCl8NQKL8Ex33XoS45LoF2uuTfLt/E52CT0Sic4JdpwvIDTwlhxQR/Yo5gWuCnQ
 L+J+zbclHjORG5EuIUsw
 =VFRY
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix SDIO IRQ bug
   - MMC regulator improvements
   - Fix slot-gpio card detect bug
   - Add support for Driver Stage Register
   - Convert the common MMC OF parser to use GPIO descriptors
   - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk()
   - Some additional minor fixes

  MMC host:
   - mmci: Support Qualcomm specific DML layer for DMA
   - dw_mmc: Use common MMC regulators
   - dw_mmc: Add support for Rock-chips RK3288
   - tmio: Enable runtime PM support
   - tmio: Add support for R-Car Gen2 SoCs
   - tmio: Several fixes and improvements
   - omap_hsmmc: Removed Balaji from MAINTAINERS
   - jz4740: add DMA and pre/post support
   - sdhci: Add support for Intel Braswell
   - sdhci: Several fixes and improvements"

* tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits)
  ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board
  mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency
  mmc: sdhci-acpi: Pass HID and UID to probe_slot
  mmc: sdhci-acpi: Get UID directly from acpi_device
  mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst
  mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency
  mmc: sdhci: Let a driver override timeout clock frequency
  mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect
  mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers
  mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller
  mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers
  mmc: sdhci: Add quirk for always getting TC with stop cmd
  mmc: core: restore detect line inversion semantics
  mmc: Fix incorrect warning when setting 0 Hz via debugfs
  mmc: Fix use of wrong device in mmc_gpiod_free_cd()
  mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot
  mmc: rtsx_pci: Set power related cap2 macros
  mmc: core: Add new power_mode MMC_POWER_UNDEFINED
  mmc: sdhci: execute tuning when device is not busy
  mmc: atmel-mci: Release mmc resources on failure in probe
  ..
 2014-10-11 06:34:22 -04:00
Linus Torvalds
b528392669 ACPI and power management updates for 3.18-rc1 
- Rework the handling of wakeup IRQs by the IRQ core such that
    all of them will be switched over to "wakeup" mode in
    suspend_device_irqs() and in that mode the first interrupt
    will abort system suspend in progress or wake up the system
    if already in suspend-to-idle (or equivalent) without executing
    any interrupt handlers.  Among other things that eliminates the
    wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt
    flag with interrupts which don't really need it and should not
    use it (Thomas Gleixner and Rafael J Wysocki).
 
  - Switch over ACPI to handling wakeup interrupts with the help
    of the new mechanism introduced by the above IRQ core rework
    (Rafael J Wysocki).
 
  - Rework the core generic PM domains code to eliminate code that's
    not used, add DT support and add a generic mechanism by which
    devices can be added to PM domains automatically during
    enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).
 
  - Add debugfs-based mechanics for debugging generic PM domains
    (Maciej Matraszek).
 
  - ACPICA update to upstream version 20140828.  Included are updates
    related to the SRAT and GTDT tables and the _PSx methods are in
    the METHOD_NAME list now (Bob Moore and Hanjun Guo).
 
  - Add _OSI("Darwin") support to the ACPI core (unfortunately, that
    can't really be done in a straightforward way) to prevent
    Thunderbolt from being turned off on Apple systems after boot
    (or after resume from system suspend) and rework the ACPI Smart
    Battery Subsystem (SBS) driver to work correctly with Apple
    platforms (Matthew Garrett and Andreas Noever).
 
  - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the
    code, adding support for 133MHz I2C source clock on Intel Baytrail
    to it and making it avoid using UART RTS override with Auto Flow
    Control (Heikki Krogerus).
 
  - ACPI backlight updates removing the video_set_use_native_backlight
    quirk which is not necessary any more, making the code check the
    list of output devices returned by the _DOD method to avoid
    creating acpi_video interfaces that won't work and adding a quirk
    for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak).
 
  - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin).
 
  - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
    Sudip Mukherjee, Yijing Wang, and Zhang Rui).
 
  - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
    Rasmus Villemoes).
 
  - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name
    change among other things), ppc-corenet, powernv (Viresh Kumar,
    Preeti U Murthy, Shilpasri G Bhat, Lucas Stach).
 
  - cpuidle support for DT-based idle states infrastructure, new
    ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi,
    Rasmus Villemoes).
 
  - ARM big.LITTLE cpuidle driver updates: support for DT-based
    initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
    Kevin Hilman).
 
  - Rework of the test_suspend kernel command line argument and
    a new trace event for console resume (Srinivas Pandruvada,
    Todd E Brandt).
 
  - Second attempt to optimize swsusp_free() (hibernation core) to
    make it avoid going through all PFNs which may be way too slow on
    some systems (Joerg Roedel).
 
  - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).
 
  - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS
    entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman).
 
  - PM core fix related to clock management (Geert Uytterhoeven).
 
  - PM core's sysfs code cleanup (Johannes Berg).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUNbJoAAoJEILEb/54YlRxRp8QAJyGIPdx+f03oBir+7vvEwhY
 svxd+V9xXK0UgWNGkCvlMk/1RIVy0qqtXliUrDaE+9tcHACA9+iAxMmNmDsjLOiO
 gpazuz5kgeznrmp1eNwQnYTt+OCReQIcyCsj4q4fNo9bbETTyr2bRz226LEuZekC
 TAiKdphYoOszFBgTVg5gfu+lqjHyXjgXPnwMTlRYn1y4YL2adDIgxj9cFedykTTW
 Eu593TY2dH6ovERJ6q3qxZbRuWuxtww95J07b3t2/2Eb3e/R/zlX0/XJ/C88f/m2
 DkqngbOYqCdw+zJeN6k8631foyfUwAcTd0sJ1+5nsm5H4NE5NqObjbxOk5/yNht6
 HgvgISGHWLerEw+A/Dk6o0oZOtR1G/TAQ5qQk5nUfKT/sSoU+9/USsXtWhXwZCia
 XccnJgW6ZtPrJJP3zDnkrxe3gndmLic11QXArw2IhWTsq0sZlAyMgtauBXLdDiQa
 H/AMiYrUNmIABef1cirBLTtgXN4Zbsai9vIrxMmV7OgBrclrh52NTjzr05P5Hnl2
 fRK56mb6mP59LymI7n8fyXL8tHnbNwFvTaxuvrZmzcYbzL0l9DuPocJrrTHRSfhm
 GFfzfvLj0R66ZM4PthRSwz4H2v1FnlRcCkj5k/QjtBPlyzxtOnJveqve5umbrnb9
 T5mRmlAs4iYwLuKCVVNT
 =sIv/
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "Features-wise, to me the most important this time is a rework of
  wakeup interrupts handling in the core that makes them work
  consistently across all of the available sleep states, including
  suspend-to-idle.  Many thanks to Thomas Gleixner for his help with
  this work.

  Second is an update of the generic PM domains code that has been in
  need of some care for quite a while.  Unused code is being removed, DT
  support is being added and domains are now going to be attached to
  devices in bus type code in analogy with the ACPI PM domain.  The
  majority of work here was done by Ulf Hansson who also has been the
  most active developer this time.

  Apart from this we have a traditional ACPICA update, this time to
  upstream version 20140828 and a few ACPI wakeup interrupts handling
  patches on top of the general rework mentioned above.  There also are
  several cpufreq commits including renaming the cpufreq-cpu0 driver to
  cpufreq-dt, as this is what implements generic DT-based cpufreq
  support, and a new DT-based idle states infrastructure for cpuidle.

  In addition to that, the ACPI LPSS driver is updated, ACPI support for
  Apple machines is improved, a few bugs are fixed and a few cleanups
  are made all over.

  Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree
  maintained by Kevin Hilman that will be merged through the PM tree.

  Numbers-wise, the generic PM domains update takes the lead this time
  with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd
  place goes to the wakeup interrupts handling rework (13 commits).

  Specifics:

   - Rework the handling of wakeup IRQs by the IRQ core such that all of
     them will be switched over to "wakeup" mode in suspend_device_irqs()
     and in that mode the first interrupt will abort system suspend in
     progress or wake up the system if already in suspend-to-idle (or
     equivalent) without executing any interrupt handlers.  Among other
     things that eliminates the wakeup-related motivation to use the
     IRQF_NO_SUSPEND interrupt flag with interrupts which don't really
     need it and should not use it (Thomas Gleixner and Rafael Wysocki)

   - Switch over ACPI to handling wakeup interrupts with the help of the
     new mechanism introduced by the above IRQ core rework (Rafael Wysocki)

   - Rework the core generic PM domains code to eliminate code that's
     not used, add DT support and add a generic mechanism by which
     devices can be added to PM domains automatically during enumeration
     (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).

   - Add debugfs-based mechanics for debugging generic PM domains
     (Maciej Matraszek).

   - ACPICA update to upstream version 20140828.  Included are updates
     related to the SRAT and GTDT tables and the _PSx methods are in the
     METHOD_NAME list now (Bob Moore and Hanjun Guo).

   - Add _OSI("Darwin") support to the ACPI core (unfortunately, that
     can't really be done in a straightforward way) to prevent
     Thunderbolt from being turned off on Apple systems after boot (or
     after resume from system suspend) and rework the ACPI Smart Battery
     Subsystem (SBS) driver to work correctly with Apple platforms
     (Matthew Garrett and Andreas Noever).

   - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code,
     adding support for 133MHz I2C source clock on Intel Baytrail to it
     and making it avoid using UART RTS override with Auto Flow Control
     (Heikki Krogerus).

   - ACPI backlight updates removing the video_set_use_native_backlight
     quirk which is not necessary any more, making the code check the
     list of output devices returned by the _DOD method to avoid
     creating acpi_video interfaces that won't work and adding a quirk
     for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak)

   - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin)

   - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
     Sudip Mukherjee, Yijing Wang, and Zhang Rui)

   - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
     Rasmus Villemoes)

   - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change
     among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U
     Murthy, Shilpasri G Bhat, Lucas Stach)

   - cpuidle support for DT-based idle states infrastructure, new ARM64
     cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus
     Villemoes)

   - ARM big.LITTLE cpuidle driver updates: support for DT-based
     initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
     Kevin Hilman)

   - Rework of the test_suspend kernel command line argument and a new
     trace event for console resume (Srinivas Pandruvada, Todd E Brandt)

   - Second attempt to optimize swsusp_free() (hibernation core) to make
     it avoid going through all PFNs which may be way too slow on some
     systems (Joerg Roedel)

   - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).

   - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry
     update in MAINTAINERS (Heiko Stübner, Kevin Hilman)

   - PM core fix related to clock management (Geert Uytterhoeven)

   - PM core's sysfs code cleanup (Johannes Berg)"

* tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits)
  ACPI / fan: printk replacement
  PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
  PM / Domains: Rename cpu_data to cpuidle_data
  cpufreq: cpufreq-dt: fix potential double put of cpu OF node
  cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
  PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free()
  cpufreq: ppc-corenet: remove duplicate update of cpu_data
  ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
  PM / sleep: Rename platform suspend/resume functions in suspend.c
  PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
  ACPICA: Introduce acpi_enable_all_wakeup_gpes()
  ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block()
  ACPI / video: check _DOD list when creating backlight devices
  PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
  cpufreq: Replace strnicmp with strncasecmp
  cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec
  cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum
  cpufreq: Allow stop CPU callback to be used by all cpufreq drivers
  PM / devfreq: exynos: Enable building exynos PPMU as module
  PM / devfreq: Export helper functions for drivers
  ...
 2014-10-09 16:07:43 -04:00
Linus Torvalds
80213c03c4 PCI changes for the v3.18 merge window: 
Enumeration
     - Check Vendor ID only for Config Request Retry Status (Rajat Jain)
     - Enable Config Request Retry Status when supported (Rajat Jain)
     - Add generic domain handling (Catalin Marinas)
     - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)
 
   Resource management
     - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
     - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)
 
   PCI device hotplug
     - Prevent NULL dereference during pciehp probe (Andreas Noever)
     - Move _HPP & _HPX handling into core (Bjorn Helgaas)
     - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
     - Apply _HPP/_HPX to display devices (Bjorn Helgaas)
     - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
     - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
     - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
     - Fix wait time in pciehp timeout message (Yinghai Lu)
     - Add more pciehp Slot Control debug output (Yinghai Lu)
     - Stop disabling pciehp notifications during init (Yinghai Lu)
 
   MSI
     - Remove arch_msi_check_device() (Alexander Gordeev)
     - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
     - Move D0 check into pci_msi_check_device() (Alexander Gordeev)
     - Remove unused kobject from struct msi_desc (Yijing Wang)
     - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
     - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
     - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
     - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
     - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)
 
   Power management
     - Drop unused runtime PM support code for PCIe ports (Rafael J.  Wysocki)
     - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)
 
   AER
     - Add additional AER error strings (Gong Chen)
     - Make <linux/aer.h> standalone includable (Thierry Reding)
 
   Virtualization
     - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
     - Add ACS quirk for Intel 10G NICs (Alex Williamson)
     - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
     - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
     - Add device flag helpers (Ethan Zhao)
     - Assume all Mellanox devices have broken INTx masking (Gavin Shan)
 
   Generic host bridge driver
     - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
     - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
     - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
     - Fix the conversion of IO ranges into IO resources (Liviu Dudau)
     - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
     - Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
     - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
     - Add arm64 architectural support for PCI (Liviu Dudau)
 
   APM X-Gene
     - Add APM X-Gene PCIe driver (Tanmay Inamdar)
     - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)
 
   Freescale i.MX6
     - Probe in module_init(), not fs_initcall() (Lucas Stach)
     - Delay enabling reference clock for SS until it stabilizes (Tim Harvey)
 
   Marvell MVEBU
     - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)
 
   NVIDIA Tegra
     - Make sure the PCIe PLL is really reset (Eric Yuen)
     - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
     - Fix extended configuration space mapping (Peter Daifuku)
     - Implement resource hierarchy (Thierry Reding)
     - Clear CLKREQ# enable on port disable (Thierry Reding)
     - Add Tegra124 support (Thierry Reding)
 
   ST Microelectronics SPEAr13xx
     - Pass config resource through reg property (Pratyush Anand)
 
   Synopsys DesignWare
     - Use NULL instead of false (Fabio Estevam)
     - Parse bus-range property from devicetree (Lucas Stach)
     - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
     - Remove pci_assign_unassigned_resources() (Lucas Stach)
     - Check private_data validity in single place (Lucas Stach)
     - Setup and clear exactly one MSI at a time (Lucas Stach)
     - Remove open-coded bitmap operations (Lucas Stach)
     - Fix configuration base address when using 'reg' (Minghuan Lian)
     - Fix IO resource end address calculation (Minghuan Lian)
     - Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
     - Add get_msi_data() to pcie_host_ops (Minghuan Lian)
     - Add support for v3.65 hardware (Murali Karicheri)
     - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)
 
   TI Keystone
     - Add TI Keystone PCIe driver (Murali Karicheri)
     - Limit MRSS for all downstream devices (Murali Karicheri)
     - Assume controller is already in RC mode (Murali Karicheri)
     - Set device ID based on SoC to support multiple ports (Murali Karicheri)
 
   Xilinx AXI
     - Add Xilinx AXI PCIe driver (Srikanth Thokala)
     - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)
 
   Miscellaneous
     - Clean up whitespace (Quentin Lambert)
     - Remove assignments from "if" conditions (Quentin Lambert)
     - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
     - x86: Mark DMI tables as initialization data (Mathias Krause)
     - x86: Move __init annotation to the correct place (Mathias Krause)
     - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
     - x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
     - x86: Mark PCI BIOS initialization code as such (Mathias Krause)
     - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
     - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNWmJAAoJEFmIoMA60/r8GncP/3uHRoBrnaF6pv+S1l1p3Fs/
 l1kKH91/IuAAU7VJX8pkNybFqx02topWmiVVXAzqvD01PcRLGCLjPbWl5h+y5/Ja
 CHZH33AwHAmm0kt4BrOSOeHTLJhAigly2zV3P4F8jRIgyaeMoGZ6Ko4tkQUpm21k
 +ohrOd4cxYkmzzCjKwsZZhKnyRNpae8FmTk3VQBPuN8DbhvFPrqo5/+GeAdSZTdS
 HZHpfl2HL4095aY7uBVsZqNkjQyl6SnWwjkjLnuI8q3qA3BLgDZE/Jr8F/MNuW1V
 y01JIjerFWMDFyBIkpg7moYnODy6oP3KvczwYdKGmqsJja+0MQvYhLTwD+R/yTQS
 SewJA0mL3T3EJEfnFYkCiaIX27xIwk/FxHfaKPN91xgx/QM7xCVZNrU2/dXjhoX1
 GqLKxOEaFHhWWTyT5Dj27I0ZcElzFZ3tIwvrHfs8y22oAuAlsAypaUgvUwRfL4CO
 hOj4ITZa0t041sYWqxCoGAA9Fdp8HMzNKKS5F4mhADz4Ad9v6uPCNv/s/RoxVsbm
 jhZOtPYJ0/iCA+kNVX563S8Z3VpfPI+7bBjcj2WKdzW+IlICvOKT+kvwL2Tv/rE7
 w0hrNsbkgGsYbPldMx7LwCavsUtYFuNj0zoU6vkhP2jk6O2Tn5VXDmjrXH0v3iHI
 v03vlUtre0bQ26fzDyLQ
 =4Zv1
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "The interesting things here are:

   - Turn on Config Request Retry Status Software Visibility.  This
     caused hangs last time, but we included a fix this time.
   - Rework PCI device configuration to use _HPP/_HPX more aggressively
   - Allow PCI devices to be put into D3cold during system suspend
   - Add arm64 PCI support
   - Add APM X-Gene host bridge driver
   - Add TI Keystone host bridge driver
   - Add Xilinx AXI host bridge driver

  More detailed summary:

  Enumeration
    - Check Vendor ID only for Config Request Retry Status (Rajat Jain)
    - Enable Config Request Retry Status when supported (Rajat Jain)
    - Add generic domain handling (Catalin Marinas)
    - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)

  Resource management
    - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
    - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)

  PCI device hotplug
    - Prevent NULL dereference during pciehp probe (Andreas Noever)
    - Move _HPP & _HPX handling into core (Bjorn Helgaas)
    - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
    - Apply _HPP/_HPX to display devices (Bjorn Helgaas)
    - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
    - Fix wait time in pciehp timeout message (Yinghai Lu)
    - Add more pciehp Slot Control debug output (Yinghai Lu)
    - Stop disabling pciehp notifications during init (Yinghai Lu)

  MSI
    - Remove arch_msi_check_device() (Alexander Gordeev)
    - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
    - Move D0 check into pci_msi_check_device() (Alexander Gordeev)
    - Remove unused kobject from struct msi_desc (Yijing Wang)
    - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
    - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
    - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
    - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
    - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)

  Power management
    - Drop unused runtime PM support code for PCIe ports (Rafael J.  Wysocki)
    - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)

  AER
    - Add additional AER error strings (Gong Chen)
    - Make <linux/aer.h> standalone includable (Thierry Reding)

  Virtualization
    - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
    - Add ACS quirk for Intel 10G NICs (Alex Williamson)
    - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
    - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
    - Add device flag helpers (Ethan Zhao)
    - Assume all Mellanox devices have broken INTx masking (Gavin Shan)

  Generic host bridge driver
    - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
    - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
    - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
    - Fix the conversion of IO ranges into IO resources (Liviu Dudau)
    - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
    - Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
    - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
    - Add arm64 architectural support for PCI (Liviu Dudau)

  APM X-Gene
    - Add APM X-Gene PCIe driver (Tanmay Inamdar)
    - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)

  Freescale i.MX6
    - Probe in module_init(), not fs_initcall() (Lucas Stach)
    - Delay enabling reference clock for SS until it stabilizes (Tim Harvey)

  Marvell MVEBU
    - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)

  NVIDIA Tegra
    - Make sure the PCIe PLL is really reset (Eric Yuen)
    - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
    - Fix extended configuration space mapping (Peter Daifuku)
    - Implement resource hierarchy (Thierry Reding)
    - Clear CLKREQ# enable on port disable (Thierry Reding)
    - Add Tegra124 support (Thierry Reding)

  ST Microelectronics SPEAr13xx
    - Pass config resource through reg property (Pratyush Anand)

  Synopsys DesignWare
    - Use NULL instead of false (Fabio Estevam)
    - Parse bus-range property from devicetree (Lucas Stach)
    - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
    - Remove pci_assign_unassigned_resources() (Lucas Stach)
    - Check private_data validity in single place (Lucas Stach)
    - Setup and clear exactly one MSI at a time (Lucas Stach)
    - Remove open-coded bitmap operations (Lucas Stach)
    - Fix configuration base address when using 'reg' (Minghuan Lian)
    - Fix IO resource end address calculation (Minghuan Lian)
    - Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
    - Add get_msi_data() to pcie_host_ops (Minghuan Lian)
    - Add support for v3.65 hardware (Murali Karicheri)
    - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)

  TI Keystone
    - Add TI Keystone PCIe driver (Murali Karicheri)
    - Limit MRSS for all downstream devices (Murali Karicheri)
    - Assume controller is already in RC mode (Murali Karicheri)
    - Set device ID based on SoC to support multiple ports (Murali Karicheri)

  Xilinx AXI
    - Add Xilinx AXI PCIe driver (Srikanth Thokala)
    - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)

  Miscellaneous
    - Clean up whitespace (Quentin Lambert)
    - Remove assignments from "if" conditions (Quentin Lambert)
    - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
    - x86: Mark DMI tables as initialization data (Mathias Krause)
    - x86: Move __init annotation to the correct place (Mathias Krause)
    - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
    - x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
    - x86: Mark PCI BIOS initialization code as such (Mathias Krause)
    - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
    - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)"

* tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits)
  arm64: dts: Add APM X-Gene PCIe device tree nodes
  PCI: Add ACS quirk for AMD A88X southbridge devices
  PCI: xgene: Add APM X-Gene PCIe driver
  PCI: designware: Remove open-coded bitmap operations
  PCI/MSI: Remove unnecessary temporary variable
  PCI/MSI: Use __write_msi_msg() instead of write_msi_msg()
  MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg()
  PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg()
  PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints
  PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib
  PCI/MSI: Remove unused kobject from struct msi_desc
  PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()
  PCI/MSI: Move D0 check into pci_msi_check_device()
  PCI/MSI: Remove arch_msi_check_device()
  irqchip: armada-370-xp: Remove arch_msi_check_device()
  PCI/MSI/PPC: Remove arch_msi_check_device()
  arm64: Add architectural support for PCI
  PCI: Add pci_remap_iospace() to map bus I/O resources
  of/pci: Add support for parsing PCI host bridge resources from DT
  of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()
  ...

Conflicts:
	arch/arm64/boot/dts/apm-storm.dtsi
 2014-10-09 15:03:49 -04:00
Tony Lindgren
b16ccfe023 ARM: dts: Disable smc91x on n900 until bootloader dependency is removed 
I added smc91x support but turns out we currently do not set the
smc91x timings in gpmc.c but rely on the bootloader timings. This
produces the following error unless the smc91x GPMC timings are
initialized by the bootloader:

Unhandled fault: external abort on non-linefetch (0x1008) at 0xd080630e
...
[<c04067fc>] (smc_drv_probe) from [<c038e9c4>] (platform_drv_probe+0x2c/0x5c)
[<c038e9c4>] (platform_drv_probe) from [<c038d450>] (driver_probe_device+0x104/0x22c)
[<c038d450>] (driver_probe_device) from [<c038d60c>] (__driver_attach+0x94/0x98)
[<c038d60c>] (__driver_attach) from [<c038bc3c>] (bus_for_each_dev+0x54/0x88)
[<c038bc3c>] (bus_for_each_dev) from [<c038cc3c>] (bus_add_driver+0xd8/0x1d8)
[<c038cc3c>] (bus_add_driver) from [<c038dd74>] (driver_register+0x78/0xf4)
[<c038dd74>] (driver_register) from [<c0008924>] (do_one_initcall+0x80/0x1c0)
[<c0008924>] (do_one_initcall) from [<c0852d9c>] (kernel_init_freeable+0x1b8/0x28c)
[<c0852d9c>] (kernel_init_freeable) from [<c05ce86c>] (kernel_init+0x8/0xec)
[<c05ce86c>] (kernel_init) from [<c000e728>] (ret_from_fork+0x14/0x2c)

Let's fix the issue by disabling the smc91x module for now until we
have sorted out the issues in gpmc.c.

Reported-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2014-10-09 11:28:34 -07:00
Bartlomiej Zolnierkiewicz
583f958b8a ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board 
Regulators for MMC2 (SD card) are PVDD_TFLASH_2V8 (LDO19) for vmmc
and PVDD_APIO_MMCOFF_2V8 (LDO13) for vqmmc.  Currently the device
tree entry for MMC2 uses PVDD_PRE_1V8 (LDO10) for vmmc and vqmmc is
not specified.  Fix it.

Without this patch:
- "mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators"
  patch causes a SD card detection to fail
- "mmc: dw_mmc: Support voltage changes" patch causes a boot hang

This patch fixes both above problems.

Suggested-by: Doug Anderson <dianders@google.com>
Cc: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Fixes: 0173055842 ("mmc: dw_mmc: Support voltage changes")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
 2014-10-09 10:48:58 +02:00
Linus Torvalds
35a9ad8af0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 
Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...
 2014-10-08 21:40:54 -04:00
Linus Torvalds
8b45bc892e ARM: SoC driver updates for 3.18 
These are changes for drivers that are intimately tied to some SoC
 and for some reason could not get merged through the respective
 subsystem maintainer tree.
 
 Most of the new code is for the Keystone Navigator driver, which is
 new base support that is going to be needed for their hardware
 accelerated network driver and other units.
 
 Most of the commits are for moving old code around from at91 and omap
 for things that are done in device drivers nowadays.
 
 - at91: move reset, poweroff, memory and clocksource code into drivers
   directories
 - socfpga: add edac driver (through arm-soc, as requested by Boris)
 - omap: move omap-intc code to drivers/irqchip
 - sunxi: added an RTC driver for sun6i
 - omap: mailbox driver related changes
 - keystone: support for the "Navigator" component
 - versatile: new reboot, led and soc drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWWQGCrR//JCVInAQKX7Q//bDkoseKCZsGaXN7vfQ2YhT3SAc52mROV
 YQKdNmtMUrHqDgngATZTx5ogOh1hInnqueFjGGhfMYsHQO1Vj8+odj0r+4jhjuUY
 3YfY+qZ+91tq33JlUOhKn+mfVMdxJc8XarGgR6MSWYkqWVYCtLtBluum7hKm2UJ6
 /e4hd2zzImX5ATwj/LXWLx5eTf1qAVFGWzNUph1DrW+1V5lOu58X4gKwk1QOCVEh
 Pa0GV9oRTkjoswwz9drzjeFtie2yofQ2mygj6QKxg5NsosIF0+B8kJ61Sxwg56Ak
 tF+qn1hGtB2cDQkpxK4o2cZgCELhkh5Aqgol/vZUS1DMBSUEGCV9PPp2eOW83r3B
 0zsTgsShyVcTh7khdpQmHNRigvcc7e69LaAGC4o/RxaZpCU/LUNCQ+/iqVExSE8A
 VNEXr+JNxGxhj3m9KUHuEktdWx1oNvaYR8Rr4RPr6EWR8R6emJ04I7kXInvzhJZL
 HOGh75vSuAU83FrsP8fFRLadoHNVDXylAs38BPfGEMngVpjvwJLgQ3+729CwW+Q4
 +xQXAKSwKfr8xA8eg6wBSbFcwnEW4QwRqFqQ5XPw7zTZkCZbiLtvn3JpI5bH5A5Q
 /d2D+M2vFbB7VbWJBM4etO95eNS/pfhqJhcQh4t0DjXjoW6WqLiHCxhEx8Ogfvop
 /4ckyGvtEOI=
 =POJD
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  Most of the new code is for the Keystone Navigator driver, which is
  new base support that is going to be needed for their hardware
  accelerated network driver and other units.

  Most of the commits are for moving old code around from at91 and omap
  for things that are done in device drivers nowadays.

   - at91: move reset, poweroff, memory and clocksource code into
     drivers directories
   - socfpga: add edac driver (through arm-soc, as requested by Boris)
   - omap: move omap-intc code to drivers/irqchip
   - sunxi: added an RTC driver for sun6i
   - omap: mailbox driver related changes
   - keystone: support for the "Navigator" component
   - versatile: new reboot, led and soc drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
  bus: arm-ccn: Fix spurious warning message
  leds: add device tree bindings for register bit LEDs
  soc: add driver for the ARM RealView
  power: reset: driver for the Versatile syscon reboot
  leds: add a driver for syscon-based LEDs
  drivers/soc: ti: fix build break with modules
  MAINTAINERS: Add Keystone Multicore Navigator drivers entry
  soc: ti: add Keystone Navigator DMA support
  Documentation: dt: soc: add Keystone Navigator DMA bindings
  soc: ti: add Keystone Navigator QMSS driver
  Documentation: dt: soc: add Keystone Navigator QMSS bindings
  rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
  rtc: sun6i: Add sun6i RTC driver
  irqchip: omap-intc: remove unnecessary comments
  irqchip: omap-intc: correct maximum number or MIR registers
  irqchip: omap-intc: enable TURBO idle mode
  irqchip: omap-intc: enable IP protection
  irqchip: omap-intc: remove unnecesary of_address_to_resource() call
  irqchip: omap-intc: comment style cleanup
  irqchip: omap-intc: minor improvement to omap_irq_pending()
  ...
 2014-10-08 17:37:16 -04:00
Linus Torvalds
eb785bef68 ARM: SoC DT updates for 3.18 
As usual, this is the largest branch, though this time a little under
 half of the total changes with 307 individual non-merge changesets.
 
 The largest changes are the addition of new machines, in particular
 the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
 for the old i.MX1 platform.
 
 Other changes include
 - at91: various sam9 and sama5 updates
 - exynos: much extended Peach Pi/Pit (Chromebook 2) support
 - keystone: new peripherals
 - meson: added DT for meson6 SoC
 - mvebu: new device support for Armada 370/375
 - qcom: improved support for IPQ8064 and MSM8x60
 - rockchip: much improved support for rk3288
 - shmobile: lots of updates all over the place
 - sunxi: dts license change
 - sunxi: more a23 device support
 - vexpress: CLCD DT description
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWVG2CrR//JCVInAQJmARAAnU2I4VpJHlBeHC4CYr/GdRq0NqiFvQ38
 7N/zevUI4l150DtejltbOX71JGM9vD3hq8VXZYBCEpTbG4el9PzAq28Fomtt4tmC
 PGbczQY8ZMvY1/MOT3XLZAd3TSUL0TZRt97t9bdLif6QyPafel5o2pd8D2OG7h+L
 Awtyk9LobT9jU3muFX3ZUfB3Gg2sNKphZjox9Le3gVjGd6g5teEqqMAehK2Y7ArJ
 kixrKck4vgduDdZe59o2yApAUsfIQv/joqu68jv3MUQrKmk4s543+rIdGDuLF5bz
 mEo7qtMXujoNaF3CyLYNEF2ZExIOJDdtmrwjHY8oKIFtIeI/faIJmeSChwa6794t
 Njj5bbnL0Pt61l4gUSFk2hUFo28gpiEB+Mm0R4E1hdoG15Iv6E+lpy44EmEmfz1c
 9h0sATNGUrz18IrUk7jI1WwIaEJUwkbZ+8wKuWtvH+Z+mFA4ZlDykVcnVuELixpb
 vKmI3kcmEw2RsJjkYq3LcgXXQevE4mHRR1ow59yXTY6OR1LmVb7odKUwbrweofQO
 eytVb1deMeYXrBXT5/j6WmrlyDbYcuGsjO4WidT+zwYUiAMCE6bTpNwUWqumVEUv
 LjCBaN6BRIb89EBwt4xIvIu7ir9hNNRZnD8aa4afSzIYxknzZy73pjjT2+wu7jbU
 m15TwYyQG4E=
 =2Sq1
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, this is the largest branch, though this time a little under
  half of the total changes with 307 individual non-merge changesets.

  The largest changes are the addition of new machines, in particular
  the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
  for the old i.MX1 platform.

  Other changes include
   - at91: various sam9 and sama5 updates
   - exynos: much extended Peach Pi/Pit (Chromebook 2) support
   - keystone: new peripherals
   - meson: added DT for meson6 SoC
   - mvebu: new device support for Armada 370/375
   - qcom: improved support for IPQ8064 and MSM8x60
   - rockchip: much improved support for rk3288
   - shmobile: lots of updates all over the place
   - sunxi: dts license change
   - sunxi: more a23 device support
   - vexpress: CLCD DT description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits)
  ARM: DTS: meson: update DTSI to add watchdog node
  ARM: dts: keystone-k2l: fix mdio io start address
  ARM: dts: keystone-k2e: fix mdio io start address
  ARM: dts: keystone-k2e: update usb1 node for dma properties
  ARM: dts: keystone: fix io range for usb_phy0
  Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
  Revert "ARM: dts: hix5hd2: add wdg node"
  ARM: dts: add rk3288 i2s controller
  ARM: vexpress: Add CLCD Device Tree properties
  ARM: bcm2835: add I2S pinctrl to device tree
  ARM: meson: documentation: add bindings documentation
  ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
  ARM: dts: mt6589: Change compatible string for GIC
  ARM: dts: mediatek: Add compatible property for aquaris5
  ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk
  ARM: dts: mt6589: Fix typo in GIC unit address
  ARM: dts: Build dtb for Mediatek board
  ARM: dts: keystone: fix bindings for pcie and usb clock nodes
  ARM: dts: keystone: k2l: Fix chip selects for SPI devices
  ARM: dts: keystone: add dsp gpio controllers nodes
  ...
 2014-10-08 17:22:23 -04:00
Linus Torvalds
cf377ad7d4 ARM: SoC platform changes for 3.18 
New and updated SoC support. Among the things new for this release are:
 
 - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3
 - bcm: Added support for BCM63XX family of DSL SoCs
 - hisi: Added support for HiP04 server-class SoC
 - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
 - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC
 
 Noteworthy changes to existing SoC support are:
 
 - imx: convert i.MX1 to device tree
 - omap: lots of power management work
 - omap: base support to enable moving to standard UART driver
 - shmobile: lots of progress for multiplatform support, still ongoing
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWVHWCrR//JCVInAQJQVw/+NEfKWh6blDvLEWHpkmBtzdsT3s+r1wwb
 ATtvd1Q7RlOMEbzxc2J87tJ44yHb64mSPBbC4BCGuQsM5IIvM4potmBphl/XxLfd
 b8PNcI6nvLO+FZOcgon0JWmvVnt+vLGKPUWzURXSRjdrpVRg2qyRpW+nPBnvX4HP
 qyzlSskkYzKm7WJQrIV1K3yYwRLrVZdz4DuF340mSFy+4H+uci2Fw91HJ9lKKmPS
 24Klx2Q4n6wfg946WazWtz21HjEBuMzRCq0CGZrwcTJffRyMxa4iq/kqE3xGbPtN
 onuP1gmAM7UOMewEvc1ZLycY7JyZ3mhKnKduqS/QN2JLLQEY2v1iYFnEKP8mHnnw
 ax6RVi91PC2MSLZyPcRtsegSKB9l16I7H+C5pgTOMgsSaqxSG1JtV1qZl3uwhBnE
 GB45KHPvTFojrH2+CqneNTLET1ozKgwtuHkWTG61/puYeap/VlpRU2OWj2mQF2E0
 SiBzmlbUBpSqzjFgVGD4ywKAuVA/WpJtaOB7Qg26GL2QoNKrY/wsUCY8hU742+jE
 b/N6obGcpmjytLkFRHx+AbYc75DHXkPtF4CWawDeQFW30LUeixZJqewQ61a56QF8
 49DbO6J+sR0n3xlteD49QdQJzDCtKw3BV+VQaFRcxqVDq4LJAxtUHJZ7c3iyvzEi
 6Yt+PsqSP7Y=
 =ZHtj
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support.  Among the things new for this release
  are:

   - at91: Added support for the new SAMA5D4 SoC, following the earlier
     SAMA5D3
   - bcm: Added support for BCM63XX family of DSL SoCs
   - hisi: Added support for HiP04 server-class SoC
   - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
   - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC

  Noteworthy changes to existing SoC support are:

   - imx: convert i.MX1 to device tree
   - omap: lots of power management work
   - omap: base support to enable moving to standard UART driver
   - shmobile: lots of progress for multiplatform support, still
     ongoing"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
  ARM: hisi: depend on ARCH_MULTI_V7
  CNS3xxx: Fix debug UART.
  ARM: at91: fix nommu build regression
  ARM: meson: add basic support for MesonX SoCs
  ARM: meson: debug: add debug UART for earlyprintk support
  irq: Export handle_fasteoi_irq
  ARM: mediatek: Add earlyprintk support for mt6589
  ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
  ARM: debug: fix alphanumerical order on debug uarts
  ARM: at91: document Atmel SMART compatibles
  ARM: at91: add sama5d4 support to sama5_defconfig
  ARM: at91: dt: add device tree file for SAMA5D4ek board
  ARM: at91: dt: add device tree file for SAMA5D4 SoC
  ARM: at91: SAMA5D4 SoC detection code and low level routines
  ARM: at91: introduce basic SAMA5D4 support
  clk: at91: add a driver for the h32mx clock
  ARM: pxa3xx: provide specific platform_devices for all ssp ports
  ARM: pxa: ssp: provide platform_device_id for PXA3xx
  ARM: OMAP4+: Remove static iotable mappings for SRAM
  ARM: OMAP4+: Move SRAM data to DT
  ...
 2014-10-08 17:13:04 -04:00
Linus Torvalds
212fe84a6f ARM: SoC cleanups for 3.18 
This time around, the cleanup branch contains mostly code removal. A number
 of board files for at91, imx and msm have become obsolete because of the
 DT conversion and are now ready to be removed. The OMAP platform has
 traditionally had its own DMA engine abstraction and as this is being
 phased out, a lot of the original code is now unused and can be removed
 as well.
 
 S3C24xx can be simplified now that the restart code is a proper device
 driver.
 
 Finally, a number of cleanups in shmobile are done to prepare for
 the addition of new code in other branches.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWVEmCrR//JCVInAQIt+Q/+P9ABxjC/IjbTi2PN1MtBaaiFZajMj9pA
 h6UCsS08sUiOlr+jjl623evQqYswRk4aoOoPS6AiOYt0xUlAJ7euoOvo82Rjc+jy
 Yc4kRx/l7KffhaFGL2zQ0iLax9BH3fkAU5+fOEkq4QWpXzCX9WKWG+x6QYNnuRxy
 Y2jhjH13s/0EKl4hCBBS8LfEWyKmaFBwzKIVTS5IyBPrmu3dGaQS+zM0O65fWY6a
 eLMlsCgnfre4doy60YlZSNLA6Wc9gdBgyVi4wD90PVVnvs/IiSuS/6QABozKRp2t
 p+OH8Apgb1W+y5RL9+3nvTAF/jbLRhu3P7/DJcpQcd35RSDUdqCvQnNyaz4j/P3i
 hsZ67gY/1gIeI09vRHnnZL2Z6whmWVk4bhY9j0bbEnAjvtizWxmJxbboOQQQ0rv6
 UO2oqJ9hN99tf8aKiKK9//DLAAVoRHgJSDxgcC10XcH6JZzACX/9BFNC0X23gWBp
 QygtHFA6kSPW243j26/KVOjP/eUkekEVn89nqVwI3jJI2pwAjylFVEH3kNAZ/R88
 J68V4nwkqrQyAHG/WQo6GDjl5NQ/JeIUHvaAfjMUvFOIiaotkxMrw56hLGk2n1ZN
 QxlnxQJX+w+VvcUhuzu0YPdZnb5AWRV2R13JAoYBCfwWviqBDXJxysTA//4OR29p
 JAqXJqzGync=
 =Af7T
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "This time around, the cleanup branch contains mostly code removal.  A
  number of board files for at91, imx and msm have become obsolete
  because of the DT conversion and are now ready to be removed.  The
  OMAP platform has traditionally had its own DMA engine abstraction and
  as this is being phased out, a lot of the original code is now unused
  and can be removed as well.

  S3C24xx can be simplified now that the restart code is a proper device
  driver.

  Finally, a number of cleanups in shmobile are done to prepare for the
  addition of new code in other branches"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: at91: Remove the support for the RSI EWS board
  arm: mach-omap2: Convert pr_warning to pr_warn
  ARM: OMAP: Remove unused pieces of legacy DMA API
  ARM: at91: remove board file for Acme Systems Fox G20
  ARM: orion5x: Convert pr_warning to pr_warn
  ARM: S3C24XX: remove separate restart code
  ARM: EXYNOS: Do not calculate boot address twice
  ARM: sunxi: Remove sun4i reboot code from mach directory
  ARM: imx: Remove mach-mxt_td60 board file
  ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains()
  ARM: shmobile: r8a7740: Clean up pm domain table
  ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains()
  ARM: shmobile: sh7372: Make domain_devices[] static __initdata
  ARM: shmobile: mackerel: Make domain_devices[] static __initdata
  clocksource: tcb_clksrc: sanitize IRQ request
  ARM: at91/tclib: mask interruptions at shutdown and probe
  ARM: at91/tclib: move initialization from alloc to probe
  ARM: at91/tclib: prefer using of devm_* functions
  ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver
  ARM: shmobile: r8a7791 is now called "R-Car M2-W"
  ...
 2014-10-08 17:06:53 -04:00
Linus Torvalds
4a4743e840 ARM: SoC non-critical bug fixes for 3.18 
These are bug fixes for harmless problems that were not important
 enough to get fixed in 3.17. The majority of these are OMAP specific,
 but there are also a couple for Marvell mvebu, cns3xxx, and others,
 as well as some updates for the MAINTAINERS file.
 
 In particular, Robert Jarzmik and Daniel Mack now volunteered to help
 out maintaining the PXA platform, Krzysztof Halasa took over the
 cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic
 meson platform, and Matthias Brugger is now listed for the mediatek
 platform he recently contributed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWVUmCrR//JCVInAQLm9hAAmXeBRbFFSP5mhGcWW08ME0bparXsYzdB
 dHOpgsc/+sYiwv0UjQlMB16vfUsfzZEh0y5FY2fq8FeFuWcQloeEdPh3pKkC0SOz
 n6qhBMYERajZysQV+zj3ngFoSIDRDrpbyLMpXZCzLgjrO7zz2sqO8oglPYIyJ5mZ
 9YMES5KazmWpVzp2Y0O/ou5x9Gx9y7Mhq+8uhL/ACzkZCqfIm0PuAaZ5Tq72h2GG
 ibjwpGJ6d1dcINOKhsJzGb24wXtjd+mzONVnTTa0wOUzUsixB8kZJEmyQSNaet3P
 Cf/g+YoQaoJkbSR1QQUU+TxvJSC30APiy6B6KeCjl+rO6j28FbWfssi5plCp/24H
 fRfw6MLzYOjfVYZ87dXGAKmO8KYaJz0vvOgKBqfzFIZDJtYnWFsMZPu/Ml20wGOC
 A84sfsAyJI3lPf02XWBv7VBKPyTP9WlaiKzrlLzquNVLZhSkPd6SBSJGCb29WlzH
 h4vfSj2sK3+8UC0HB5ZBWwggdESqaloAjAHAdHk8dkCAkfjyUvjzorSTwaUmy8uc
 PU5Fifl7Pf18pZkj2rJ4mBuVUrxtlW33oXerf9iSaYVhJH/d0xfXca1mwcuKUWFv
 /pOe9c+XNZYzIZ6PWux/SqTSoe6Q6vi3KVBXjP+45cUHa0/uwgufO9vf+zCAfxV/
 +yg7aMWHJP8=
 =Smzi
 -----END PGP SIGNATURE-----

Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
 "These are bug fixes for harmless problems that were not important
  enough to get fixed in 3.17.  The majority of these are OMAP specific,
  but there are also a couple for Marvell mvebu, cns3xxx, and others, as
  well as some updates for the MAINTAINERS file.

  In particular, Robert Jarzmik and Daniel Mack now volunteered to help
  out maintaining the PXA platform, Krzysztof Halasa took over the
  cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic
  meson platform, and Matthias Brugger is now listed for the mediatek
  platform he recently contributed"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: update Shawn's email address
  MAINTAINERS: condense some Tegra related entries
  MAINTAINERS: add Alexandre Courbot for Tegra
  MAINTAINERS: CNS3xxx and IXP4xx update.
  MAINTAINERS: Add maintainers entry for Mediatek SoCs
  arm, vt8500, LLVMLlinux: Use mcr instead of mcr% for mach-vt8500
  MAINTAINERS: add a third maintainer to mach-bcm
  CNS3xxx: Fix PCIe read size limit.
  CNS3xxx: Fix logical PCIe topology.
  CNS3xxx: Fix debug UART.
  MAINTAINERS: Add entry for the Amlogic MesonX SoCs
  MAINTAINERS: update ARM pxa maintainers
  ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
  ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings
  ARM: mvebu: Netgear RN102: Use Hardware BCH ECC
  ARM: Kirkwood: Fix DT based DSA.
  ARM: OMAP2+: make of_device_ids const
  ARM: omap2: make arrays containing machine compatible strings const
  ARM: LPC32xx: Fix reset function
  ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC
  ...
 2014-10-08 17:03:09 -04:00
Rafael J. Wysocki
b2eed302b6 Merge branch 'pm-cpuidle' 
* pm-cpuidle:
  drivers: cpuidle: initialize big.LITTLE driver through DT
  drivers: cpuidle: CPU idle ARM64 driver
  drivers: cpuidle: implement DT based idle states infrastructure
  cpuidle: big.LITTLE: add Exynos5800 compatible string
  cpuidle: Replace strnicmp with strncasecmp
  arm64: add PSCI CPU_SUSPEND based cpu_suspend support
  arm64: kernel: introduce cpu_init_idle CPU operation
  arm64: kernel: refactor the CPU suspend API for retention states
  Documentation: arm: define DT idle states bindings
 2014-10-07 01:18:23 +02:00
Russell King
d5d1689224 Merge branches 'fiq' (early part), 'fixes', 'l2c' (early part) and 'misc' into for-next 2014-10-02 21:47:02 +01:00
Carlo Caione
d4ac2cfea7 ARM: DTS: meson: update DTSI to add watchdog node 
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Carlo Caione <carlo@caione.org>
 2014-10-02 22:27:42 +02:00
David S. Miller
739e4a758e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Conflicts:
	drivers/net/usb/r8152.c
	net/netfilter/nfnetlink.c

Both r8152 and nfnetlink conflicts were simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-10-02 11:25:43 -07:00
Arnd Bergmann
4394a00145 mvebu DT changes for v3.18 (round 2) 
- Armada XP
     - Add HW datasheet references to docs
 
  - Armada 370
     - Change internal registers to 0xf1000000 for Armada 370 RD board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJULVkEAAoJEP45WPkGe8ZnXHMP/1nX+ChvRqYxf5cNqvjioUJQ
 LbpTvMZpunqMkhxk3Kg1rVBxsrDnZWQaTq9IM/yvV+W4g/9vnIymJR9xfhNP1IHr
 ZbunZt8ztnBfMxvMonuEa2kHVjrVs2ztb+ouz2ca4owtvh8SvgFZsY7CN0Jus9xQ
 WHIQ+wNt5deeJDQEH7jId1/DocSztyS/9p3L/Ft+z6KmY5ZAn68xoMD4TZ+Gv/mN
 ecdVu5uYWYg3wF+Tgtg2BHX0wQugRdDccQEocU/TPqvXCbx4Eo6oRTJSfHO57i3L
 hZpnvX7YVrpk25uOS4FWIpqfYMWp+zTecRHBlqrvxWlWdeVm2un96wdSEa7toCmf
 Xnc0ELraHNoK45MlRs8eznLw3JZy7485plLZ9aue88n0nqqzIl2q4RhMHrNoLxRG
 4/iHSB5AS/7hJxI95Tn/ALe7LF8Wd73kQI9PFXlmU1Rx+NLP+BPNTrqDEdBQzECW
 q7aEmf7vdx2QUQuzW1IvaBn6OHwGGinw3E/1wHx71L/IZ3wus09tKCtOF5tnhjuP
 3DF9G4fhXz9R6dAJqQExK0ejD5NgcrRho3vuLi9SkSaxtXQ1sObwHiVUDGFzGu5c
 fzQ6bEsaMARl4lHZJYtOxXOmtBq3df+/4XpDNZw/haS4hpY9md3TX3hTUHmYPq3S
 Zqr0zDOolNAtpxsybeLL
 =Cjp7
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-3.18-2' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu DT changes for v3.18 (round 2)" from Jason Cooper:

 - Armada XP
    - Add HW datasheet references to docs

 - Armada 370
    - Change internal registers to 0xf1000000 for Armada 370 RD board

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'mvebu-dt-3.18-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: switch the Armada 370 RD board to internal registers at 0xf1000000
  Documentation: arm: add hardware datasheet reference for Marvell Armada XP
 2014-10-02 17:08:24 +02:00
Arnd Bergmann
5a6da55f10 Few keystone DTS fixes for 3.18 
- IO range fix for USB phy device
 	- Add missing dma-coherent property for K2E USB node
 	- Fix K2L MDIO start address
 	- Fix K2E MDIO start address
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJULA0zAAoJEHJsHOdBp5c/QlgQALfdqkrQATHc4Sp7dggM8XiY
 m52yGIu3X8qvQkD5B9HjHXmo3WuvFWloVuS20l1GwiG6g4nNI+RgMKe0+G1DVHaA
 QadQNm+H2TLlj906xY9ZrXs5igtZRwiIwooQDY/xTpbFoqIhwJAm6aD/i2/OFirx
 L/Z5fge9EaKsWATwmvDqyN9Beu+WD0HwmFMgIc10WH2VU/NaWPpj3Kmt4yIlpzEx
 KCmclHAokQcAQuigYg/6VAooifDQcPLjuqmt+d0BlxWn16twToGV+SDQMITiO10d
 mEWb/h6ugkzfZZgZcNSk8H0QsWP6Y9JCm3d7yH1KGJzkZxBzQ730e10QthtbGQ+W
 gpvWKPbbbS5+kT1QQ9pMaq9EuSS3rdXzhAcSj7uRDh1D0SFTRqsOpxIm8GLW16Dq
 FOiolVpGoXWu9m4OelhbFMAt/m/clQvtZq0o2+yEGLpkc0H5dVERTxyyrkVZaf5o
 LHBzWJu4bwV4ypcPIk6E7N1bbDqr4UZS/PvSJdfyM+nH7P3Ur4ZZ2kRA3VLxGkCI
 +GMlbQkIR/CF73vO4egdwCDEEgwCZjQiiGeCfm9ou/51JULhPucnXrPhVCivluK0
 9FbBWJu0k4E9nYqyTnfL1SfSdXO8wvixsPQ2cAHlP+/TkNTltbT2289ZDzNZgzg5
 UNAQOyr66EOsHcyrvgmX
 =rMKj
 -----END PGP SIGNATURE-----

Merge tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Pull "Few keystone DTS fixes for 3.18" from Santosh Shilimkar:

	- IO range fix for USB phy device
	- Add missing dma-coherent property for K2E USB node
	- Fix K2L MDIO start address
	- Fix K2E MDIO start address

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone-k2l: fix mdio io start address
  ARM: dts: keystone-k2e: fix mdio io start address
  ARM: dts: keystone-k2e: update usb1 node for dma properties
  ARM: dts: keystone: fix io range for usb_phy0
 2014-10-02 16:47:40 +02:00
Grygorii Strashko
45aa70d1f7 ARM: dts: keystone-k2l: fix mdio io start address 
The K2L MDIO io space has different start address.
Hence, fix it to be 0x26200f00 according to TRM.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
 2014-10-01 09:59:33 -04:00
Grygorii Strashko
9a84c8928d ARM: dts: keystone-k2e: fix mdio io start address 
The K2E MDIO io space has different start address.
Hence, fix it to be 0x24200f00 according to TRM.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
 2014-10-01 09:58:25 -04:00
Grygorii Strashko
b741bb2878 ARM: dts: keystone-k2e: update usb1 node for dma properties 
Keystone supports dma-coherent on USB master and also needs
dma-ranges to specify the hardware alias memory range in which DMA
can be operational.
Such configuration applied for USB0 devices, but It's missed for
USB1 device which is present only in K2E SoC - hence apply it.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
 2014-10-01 09:58:25 -04:00
Grygorii Strashko
cfb198ceed ARM: dts: keystone: fix io range for usb_phy0 
The IO range size is set incorrectly for USB PHY0 deivice
it should be 24 instead of 32. Otherwise, It causes
USB PHY1 probing failure.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
 2014-10-01 09:58:25 -04:00
Antoine Ténart
75215193b9 ARM: dts: berlin: enable the Ethernet port on the BG2Q DMP 
This patch enables the Ethernet port on the Marvell Berlin2Q DMP board.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-09-30 16:36:13 -04:00
Antoine Ténart
bdc06cd701 ARM: dts: berlin: add the Ethernet node 
This patch adds the Ethernet node, enabling the network unit on Berlin
BG2Q SoCs.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-09-30 16:36:13 -04:00
Mike Turquette
38bf3a7978 Merge branch 'clk-pxa27x' into clk-next 2014-09-30 12:49:42 -07:00
Robert Jarzmik
85fe55c11a dts: add devicetree bindings for pxa27x clocks 
Add the clock tree description for the PXA27x based boards.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
 2014-09-30 12:31:31 -07:00
Mike Turquette
24afc3852e Samsung clock patches for v3.18 
1) non-critical fixes (without the need to push to stable)
 
 fa0111be4f clk: samsung: exynos4: remove duplicate div_core2 divider clock instantiation
 b511593d71 clk: samsung: exynos4: fix g3d clocks
 c142543001 clk: samsung: exynos4: add missing smmu_g2d clock and update comments
 22842d244a clk: samsung: exynos5260: fix typo in clock name
 e82ba578cc clk: samsung: exynos3250: fix width field of mout_mmc0/1
 59037b92f4 clk: samsung: exynos3250: fix width and shift of div_spi0_isp clock
 5ce37f2666 clk: samsung: exynos3250: fix mout_cam_blk parent list
 
 2) Clock driver extensions
 
 07ccf02ba5 dt-bindings: clk: samsung: Document the DMC domain of Exynos3250 CMU
 d0e73eaf19 ARM: dts: exynos3250: Add CMU node for DMC domain clocks
 e3c3f19bc6 clk: samsung: exynos3250: Register DMC clk provider
 4676f0aab9 clk: samsung: exynos4: add support for MOUT_HDMI and MOUT_MIXER clocks
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUKcEKAAoJEIv3Hb8G/XruW/cP/34kC45bvMqXIIcDHq3CRRpG
 i3HgG3mJb/rSzE4rDMPBtBXmkp45tHfOh4npdw5Db/+Kpb6m22X0yEYmGtH5Yfpw
 thQEuAeCjL5jDob/YjbPHH1PeoBHy5LS5wgwaJIC/aLQj6od31mgWZabYpeVX3AE
 flrWoxVmFVWGUKqfk2hJMY7RVuJcNw2CyIJ/jK0V3zh05GM9e8sFulXY3vellofW
 6aSaRYWqD7QYlf9VSU0ECHpCoFTIRCDh0k/yafDZrvOyKuWfyvGYorGnLh3wE7S7
 bPi+fo47WKRtoiKEeQDa0egxq/fl0ksp3kubWZq09EQYKQE/pMHayCYyImxGyAeK
 gy0M6E8M3Xwf+Slg+xKrNRP89ExfW0ymTbaNMgKJf96ocQjSH93rcPZGrXhrPILT
 CV8jWNRSjNcAfAvuzH2CZiLfCrc9phTbz3WEce8D8zf14fPOkGrYQB0GMr1+HUj1
 4LL/3JcCt/3wrliSVim3eSf1lgUCLKocMM1lrzzc7JhBamKvesKU2gw+RRSg9Pe5
 gg7RPCSgQMieGp1yO8nNkbmZhhXPNIXoEHjMlS1XTymBHiG+24f1mX7Q/nfGD5mY
 VP7LKeLUIYKPQZlvM9d9Ko2Xt13ypDZLGAM/bmEtOoibeNbELbfzeIxiUkgkB6rE
 uADWSEd6SDyV+E6nK62z
 =MsKp
 -----END PGP SIGNATURE-----

Merge tag 'for_3.18/samsung-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next

Samsung clock patches for v3.18

1) non-critical fixes (without the need to push to stable)

fa0111be4f clk: samsung: exynos4: remove duplicate div_core2 divider clock instantiation
b511593d71 clk: samsung: exynos4: fix g3d clocks
c142543001 clk: samsung: exynos4: add missing smmu_g2d clock and update comments
22842d244a clk: samsung: exynos5260: fix typo in clock name
e82ba578cc clk: samsung: exynos3250: fix width field of mout_mmc0/1
59037b92f4 clk: samsung: exynos3250: fix width and shift of div_spi0_isp clock
5ce37f2666 clk: samsung: exynos3250: fix mout_cam_blk parent list

2) Clock driver extensions

07ccf02ba5 dt-bindings: clk: samsung: Document the DMC domain of Exynos3250 CMU
d0e73eaf19 ARM: dts: exynos3250: Add CMU node for DMC domain clocks
e3c3f19bc6 clk: samsung: exynos3250: Register DMC clk provider
4676f0aab9 clk: samsung: exynos4: add support for MOUT_HDMI and MOUT_MIXER clocks
 2014-09-29 23:43:12 -07:00
Markus Pargmann
fa5f4adf3a arm: dts: am33xx, Add syscon phandle to cpsw node 
There are 2 MACIDs stored in the control module of the am33xx. These are
read by the cpsw driver if no valid MACID was found in the devicetree.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-09-30 01:30:43 -04:00
Markus Pargmann
c9aaf87cd0 am33xx: define syscon control module device node 
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2014-09-30 01:30:43 -04:00
Linus Torvalds
8369289864 ARM: SoC fixes for 3.17 
Here's our last set of fixes for 3.17. Most of these are for TI platforms,
 fixing some noisy Kconfig issues, runtime clock and power issues on
 several platforms and NAND timings on DRA7.
 
 There are also a couple of bug fixes for i.MX, one for QCOM and a small
 fix to avoid section mismatch noise on PXA.
 
 Diffstat looks large, partially due to some tables being updated and
 thus touching many lines. The qcom gsbi change also restructures clock
 management a bit and thus touches a bunch of lines.
 
 All in all, a bit more changes than we'd like at this point, but nothing
 stands out as risky either so it seems like the right thing to send it
 up now instead of holding it to the merge window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJUJxVMAAoJEIwa5zzehBx3VVoP/3WeftI/+vncYhMmPCaUxOso
 B/rNY1CW2ZYr9yWEvREQtMQCkLWYPifeyHa+fXHeFfLGWlMP1wU4LP78RrvaMnSs
 V0d2wYmfTkSIlVwqRMuArY9KwnOTRSiDfhQpl2BQ84u1IaZM5/IRw9oNICTao8jI
 A7NsLAnss3exKCT06R3CcG7+fq3zVc19aI1QJG61BFqTIVItf71NTm/lcjsL3Tss
 Tr/ITTgZM6UGkEnTUuRCl3gpMn/TVvO/qE94xU6vY0jqDQKUl1cxUCx6gRcSDRu4
 PvLvPS7d4p99dHmLxVUuLBT7AGtRCxfdAoVE3D3rmGfcthDt1nFBgJfp6ekQZAM9
 ZfJnrvfHRLjl/lxQvWWkpuugu0z7GCFeXRFHN6aLsD6aRD4JmYoRuSeA0aXmTKyp
 oDcduXqYOImTcbUQ8G8n1YeK8BAVlL6PEZKvaIhjmxUWHVeGdpesz9s7TFBqGBBd
 F1EeCPtAczBpNJP4E/dRDzWYjp+lGyQs4dQEU+YpRe9drzJpw6GsDuaF78QP8A5a
 TEcc3y3o2FSNbGCw9qQ7pkgm76aS1YhLKMQb+2JXJptgwKMw3G6abMr+iomlm3Id
 DY8+WIBggx/gB5k/onFseZvjNxVKqQUeh31UT5e1v/9M4bCJvEcY+KeKcgjbPpy7
 GnGoXEvCnwZ7kPokqH0D
 =K6xV
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Here's our last set of fixes for 3.17.  Most of these are for TI
  platforms, fixing some noisy Kconfig issues, runtime clock and power
  issues on several platforms and NAND timings on DRA7.

  There are also a couple of bug fixes for i.MX, one for QCOM and a
 small fix to avoid section mismatch noise on PXA.

  Diffstat looks large, partially due to some tables being updated and
  thus touching many lines.  The qcom gsbi change also restructures
  clock management a bit and thus touches a bunch of lines.

  All in all, a bit more changes than we'd like at this point, but
  nothing stands out as risky either so it seems like the right thing to
  send it up now instead of holding it to the merge window"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  drivers/soc: qcom: do not disable the iface clock in probe
  ARM: imx: fix .is_enabled() of shared gate clock
  ARM: OMAP3: Fix I/O chain clock line assertion timed out error
  ARM: keystone: dts: fix bindings for pcie and usb clock nodes
  bus: omap_l3_noc: Fix connID for OMAP4
  ARM: DT: imx53: fix lvds channel 1 port
  ARM: dts: cm-t54: fix serial console power supply.
  ARM: dts: dra7-evm: Fix NAND GPMC timings
  ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init
  ARM: OMAP: Fix Kconfig warning for omap1
 2014-09-27 14:58:59 -07:00
Mike Turquette
4dc7ed32f3 Allwinner Clocks Additions for 3.18 
The most important part of this serie is the addition of the phase API to
 handle the MMC clocks in the Allwinner SoCs.
 
 Apart from that, the A23 gained a new mbus driver, and there's a fix for a
 incorrect divider table on the APB0 clock.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUJm3zAAoJEBx+YmzsjxAgxJwQAJk3+Oq3J54jzRxKLGjUpfy9
 Ma9p/78ZSnYlYWrEn62vzu7sGeMJsPo4Lsmy+Hch2r765+PzFZw9oDaxjFT5poQy
 Mv8F7Uyetc99sGAfmg/fKnzgQpp1t+9+kB42cV6lzjXolqX/ACcIjzFOzROXEF9B
 2bnQ3RwXqvQhKKryDBg9+hJYt1R15d4SxQ7Rn6lb6WsZTxjGVO0cvvU3tp4QGQgg
 ZDUkJNLzLYdMK9XUNyqreatmz+HMxL5vYHeEWFz388ECp9DRUPT3MqlQcUqgSLlD
 eMqQPOnd5p5ZEUdB8qAAtf4kIbQTaVa7/4u37sE/+fogw6Pq/6a2Jqppl9aJWD7I
 PDFjxSMl77W5mQZSEanbc0a0qmqAqtZokDusP0bc0ETSZzmPVvohjW5Fa9Awyi0j
 PeN2bTglaFDPsHxKlQ31HF/e/almXkpiIXegeG0e/3VrGSrghFMQtqLEUXgVPu10
 4PV8x7O2ib1VVAowwOb10qGv0fLGC8UCqL9zXVNlCy268ijjKMlNyK3U1sllphba
 fWBYgtg9+1YHONI1SewuYibAqROC7ICDXiqDkJVb6UWmO39HBcOFDb3HJ0EIj8T4
 9v1clkVy1vONIqfvi1SeTekLovpROOxhxGtyXTpdx5qdlVhBjkEsNVHc5jh6BPHr
 o9TlBnnmIPajvF9wMN+H
 =ZkI9
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clocks-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Allwinner Clocks Additions for 3.18

The most important part of this serie is the addition of the phase API to
handle the MMC clocks in the Allwinner SoCs.

Apart from that, the A23 gained a new mbus driver, and there's a fix for a
incorrect divider table on the APB0 clock.
 2014-09-27 12:52:33 -07:00
Maxime Ripard
7868c5ebdb ARM: sunxi: dt: Switch to the new mbus compatible 
Now that we have a compatible of its own for the mbus clock, switch to it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
 2014-09-27 08:58:02 +02:00
Vincent Sanders
75c349062a ARM: 8153/1: Enable gcov support on the ARM architecture 
Enable gcov support for ARM based on original patches by David
Singleton and George G. Davis

Riku - updated to patch to current mainline kernel. The patch
has been submitted in 2010, 2012 - for symmetry, now in 2014 too.

https://lwn.net/Articles/390419/
http://marc.info/?l=linux-arm-kernel&m=133823081813044

v2: remove arch/arm/kernel from gcov disabled files

Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
 2014-09-26 14:39:57 +01:00
Arnd Bergmann
3a75d1ad9a Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt" 
Apparently most of the newly added nodes had the same problem,
so instead of reverting the individual patches, this undoes
the effect of the merge and backs out all of them at once.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2014-09-26 14:17:26 +02:00
Olof Johansson
32bb231845 Revert "ARM: dts: hix5hd2: add wdg node" 
This reverts commit 610bd8722e.

"ARM: dts: hix5hd2: add wdg node" causes a build breakage due to
an undefined constatns:

Error: arch/arm/boot/dts/hisi-x5hd2.dtsi:374.22-23 syntax error

(Don't you just looove the dtc error messages? They are so informative!)

Signed-off-by: Olof Johansson <olof@lixom.net>
 2014-09-25 17:42:58 -07:00