This work implements direct packet access for helpers and direct packet
write in a similar fashion as already available for XDP types via commits
4acf6c0b84 ("bpf: enable direct packet data write for xdp progs") and
6841de8b0d ("bpf: allow helpers access the packet directly"), and as a
complementary feature to the already available direct packet read for tc
(cls/act) programs.
For enabling this, we need to introduce two helpers, bpf_skb_pull_data()
and bpf_csum_update(). The first is generally needed for both, read and
write, because they would otherwise only be limited to the current linear
skb head. Usually, when the data_end test fails, programs just bail out,
or, in the direct read case, use bpf_skb_load_bytes() as an alternative
to overcome this limitation. If such data sits in non-linear parts, we
can just pull them in once with the new helper, retest and eventually
access them.
At the same time, this also makes sure the skb is uncloned, which is, of
course, a necessary condition for direct write. As this needs to be an
invariant for the write part only, the verifier detects writes and adds
a prologue that is calling bpf_skb_pull_data() to effectively unclone the
skb from the very beginning in case it is indeed cloned. The heuristic
makes use of a similar trick that was done in 233577a220 ("net: filter:
constify detection of pkt_type_offset"). This comes at zero cost for other
programs that do not use the direct write feature. Should a program use
this feature only sparsely and has read access for the most parts with,
for example, drop return codes, then such write action can be delegated
to a tail called program for mitigating this cost of potential uncloning
to a late point in time where it would have been paid similarly with the
bpf_skb_store_bytes() as well. Advantage of direct write is that the
writes are inlined whereas the helper cannot make any length assumptions
and thus needs to generate a call to memcpy() also for small sizes, as well
as cost of helper call itself with sanity checks are avoided. Plus, when
direct read is already used, we don't need to cache or perform rechecks
on the data boundaries (due to verifier invalidating previous checks for
helpers that change skb->data), so more complex programs using rewrites
can benefit from switching to direct read plus write.
For direct packet access to helpers, we save the otherwise needed copy into
a temp struct sitting on stack memory when use-case allows. Both facilities
are enabled via may_access_direct_pkt_data() in verifier. For now, we limit
this to map helpers and csum_diff, and can successively enable other helpers
where we find it makes sense. Helpers that definitely cannot be allowed for
this are those part of bpf_helper_changes_skb_data() since they can change
underlying data, and those that write into memory as this could happen for
packet typed args when still cloned. bpf_csum_update() helper accommodates
for the fact that we need to fixup checksum_complete when using direct write
instead of bpf_skb_store_bytes(), meaning the programs can use available
helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(),
csum_block_add(), csum_block_sub() equivalents in eBPF together with the
new helper. A usage example will be provided for iproute2's examples/bpf/
directory.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sample use case of how this is encoded:
user space via tuntap (or a connected VM/Machine/container)
encodes the tcindex TLV.
Sample use case of decoding:
IFE action decodes it and the skb->tc_index is then used to classify.
So something like this for encoded ICMP packets:
.. first decode then reclassify... skb->tcindex will be set
sudo $TC filter add dev $ETH parent ffff: prio 2 protocol 0xbeef \
u32 match u32 0 0 flowid 1:1 \
action ife decode reclassify
...next match the decode icmp packet...
sudo $TC filter add dev $ETH parent ffff: prio 4 protocol ip \
u32 match ip protocol 1 0xff flowid 1:1 \
action continue
... last classify it using the tcindex classifier and do someaction..
sudo $TC filter add dev $ETH parent ffff: prio 5 protocol ip \
handle 0x11 tcindex classid 1:1 \
action blah..
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a typical IPvlan L3 setup where master is in default-ns and
each slave is into different (slave) ns. In this setup egress
packet processing for traffic originating from slave-ns will
hit all NF_HOOKs in slave-ns as well as default-ns. However same
is not true for ingress processing. All these NF_HOOKs are
hit only in the slave-ns skipping them in the default-ns.
IPvlan in L3 mode is restrictive and if admins want to deploy
iptables rules in default-ns, this asymmetric data path makes it
impossible to do so.
This patch makes use of the l3_rcv() (added as part of l3mdev
enhancements) to perform input route lookup on RX packets without
changing the skb->dev and then uses nf_hook at NF_INET_LOCAL_IN
to change the skb->dev just before handing over skb to L4.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a nested attribute of offload stats to if_stats_msg
named IFLA_STATS_LINK_OFFLOAD_XSTATS.
Under it, add SW stats, meaning stats only per packets that went via
slowpath to the cpu, named IFLA_OFFLOAD_XSTATS_CPU_HIT.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to gre, vxlan, geneve tunnels allow IPIP tunnels to
operate in 'collect metadata' mode.
bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away.
ovs can use it as well in the future (once appropriate ovs-vport
abstractions and user apis are added).
Note that just like in other tunnels we cannot cache the dst,
since tunnel_info metadata can be different for every packet.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Specify the format (size and endianess) for the vlan attributes.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the definitions for src/dst udp/tcp port masks and use
them when setting && dumping the relevant keys.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This action is intended to be an upgrade from a usability perspective
from pedit (as well as operational debugability).
Compare this:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action pedit munge offset -14 u8 set 0x02 \
munge offset -13 u8 set 0x15 \
munge offset -12 u8 set 0x15 \
munge offset -11 u8 set 0x15 \
munge offset -10 u16 set 0x1515 \
pipe
to:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action skbmod dmac 02:15:15:15:15:15
Also try to do a MAC address swap with pedit or worse
try to debug a policy with destination mac, source mac and
etherype. Then make few rules out of those and you'll get my point.
In the future common use cases on pedit can be migrated to this action
(as an example different fields in ip v4/6, transports like tcp/udp/sctp
etc). For this first cut, this allows modifying basic ethernet header.
The most important ethernet use case at the moment is when redirecting or
mirroring packets to a remote machine. The dst mac address needs a re-write
so that it doesnt get dropped or confuse an interconnecting (learning) switch
or dropped by a target machine (which looks at the dst mac). And at times
when flipping back the packet a swap of the MAC addresses is needed.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The action will release the metadata created by the tunnel device
(decap), or set the metadata with the specified values for encap
operation.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0' (after metadata is released):
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
dst_ip 11.11.11.1 \
action tunnel_key release \
action mirred egress redirect dev vnet0
The action tunnel_key, will be introduced in the next patch in this
series.
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
openvswitch: Add support for 8021.AD
Change the description of the VLAN tpid field.
Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the capability for a process that has CAP_NET_ADMIN on
a socket to see the socket mark in socket dumps.
Commit a52e95abf7 ("net: diag: allow socket bytecode filters to
match socket marks") recently gave privileged processes the
ability to filter socket dumps based on mark. This patch is
complementary: it ensures that the mark is also passed to
userspace in the socket's netlink attributes. It is useful for
tools like ss which display information about sockets.
Tested: https://android-review.googlesource.com/270210
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next
tree. Most relevant updates are the removal of per-conntrack timers to
use a workqueue/garbage collection approach instead from Florian
Westphal, the hash and numgen expression for nf_tables from Laura
Garcia, updates on nf_tables hash set to honor the NLM_F_EXCL flag,
removal of ip_conntrack sysctl and many other incremental updates on our
Netfilter codebase.
More specifically, they are:
1) Retrieve only 4 bytes to fetch ports in case of non-linear skb
transport area in dccp, sctp, tcp, udp and udplite protocol
conntrackers, from Gao Feng.
2) Missing whitespace on error message in physdev match, from Hangbin Liu.
3) Skip redundant IPv4 checksum calculation in nf_dup_ipv4, from Liping Zhang.
4) Add nf_ct_expires() helper function and use it, from Florian Westphal.
5) Replace opencoded nf_ct_kill() call in IPVS conntrack support, also
from Florian.
6) Rename nf_tables set implementation to nft_set_{name}.c
7) Introduce the hash expression to allow arbitrary hashing of selector
concatenations, from Laura Garcia Liebana.
8) Remove ip_conntrack sysctl backward compatibility code, this code has
been around for long time already, and we have two interfaces to do
this already: nf_conntrack sysctl and ctnetlink.
9) Use nf_conntrack_get_ht() helper function whenever possible, instead
of opencoding fetch of hashtable pointer and size, patch from Liping Zhang.
10) Add quota expression for nf_tables.
11) Add number generator expression for nf_tables, this supports
incremental and random generators that can be combined with maps,
very useful for load balancing purpose, again from Laura Garcia Liebana.
12) Fix a typo in a debug message in FTP conntrack helper, from Colin Ian King.
13) Introduce a nft_chain_parse_hook() helper function to parse chain hook
configuration, this is used by a follow up patch to perform better chain
update validation.
14) Add rhashtable_lookup_get_insert_key() to rhashtable and use it from the
nft_set_hash implementation to honor the NLM_F_EXCL flag.
15) Missing nulls check in nf_conntrack from nf_conntrack_tuple_taken(),
patch from Florian Westphal.
16) Don't use the DYING bit to know if the conntrack event has been already
delivered, instead a state variable to track event re-delivery
states, also from Florian.
17) Remove the per-conntrack timer, use the workqueue approach that was
discussed during the NFWS, from Florian Westphal.
18) Use the netlink conntrack table dump path to kill stale entries,
again from Florian.
19) Add a garbage collector to get rid of stale conntracks, from
Florian.
20) Reschedule garbage collector if eviction rate is high.
21) Get rid of the __nf_ct_kill_acct() helper.
22) Use ARPHRD_ETHER instead of hardcoded 1 from ARP logger.
23) Make nf_log_set() interface assertive on unsupported families.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce BPF_PROG_TYPE_PERF_EVENT programs that can be attached to
HW and SW perf events (PERF_TYPE_HARDWARE and PERF_TYPE_SOFTWARE
correspondingly in uapi/linux/perf_event.h)
The program visible context meta structure is
struct bpf_perf_event_data {
struct pt_regs regs;
__u64 sample_period;
};
which is accessible directly from the program:
int bpf_prog(struct bpf_perf_event_data *ctx)
{
... ctx->sample_period ...
... ctx->regs.ip ...
}
The bpf verifier rewrites the accesses into kernel internal
struct bpf_perf_event_data_kern which allows changing
struct perf_sample_data without affecting bpf programs.
New fields can be added to the end of struct bpf_perf_event_data
in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a per-port flag to control the unknown multicast flood, similar to the
unknown unicast flood flag and break a few long lines in the netlink flag
exports.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enhances ethtool link mode bitmap to include
missing interface modes for 1G/10G speeds
Changes:
1000baseX is the mode introduced to cover all 1G Fiber cases.
All modes under 1000BaseX i.e. 1000BASE-SX, 1000BASE-LX, 1000BASE-LX10
and 1000BASE-BX10 are not explicitly defined at this moment.
10G CR,SR,LR and ER link modes are included for 10G speed..
Issue:
ethtool on 1G/10G SFP port reports Base-T
as this port supports 1000baseX,10G CR, SR and LR modes.
root@tor-02$ ethtool swp1
Settings for swp1:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Advertised link modes: 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 10000Mb/s
Duplex: Full
Port: FIBRE
PHYAD: 0
Transceiver: external
Auto-negotiation: off
Current message level: 0x00000000 (0)
Link detected: yes
After fix:
root@tor-02$ ethtool swp1
Settings for swp1:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseX/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
10000baseER/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Advertised link modes: 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 10000Mb/s
Duplex: Full
Port: FIBRE
PHYAD: 0
Transceiver: external
Auto-negotiation: off
Current message level: 0x00000000 (0)
Link detected: yes
Signed-off-by: Vidya Sagar Ravipati <vidya@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add UDP bearer options to netlink bearer get message. This is used by
the tipc user space tool to display UDP options.
The UDP bearer information is passed using either a sockaddr_in or
sockaddr_in6 structs. This means the user space receiver should
intermediately store the retrieved data in a large enough struct
(sockaddr_strage) before casting to the proper IP version type.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces UDP replicast. A concept where we emulate
multicast by sending multiple unicast messages to configured peers.
The purpose of replicast is mainly to be able to use TIPC in cloud
environments where IP multicast is disabled. Using replicas to unicast
multicast messages is costly as we have to copy each skb and send the
copies individually.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds SNMP counter for drops caused by MD5 mismatches.
The current syslog might help, but a counter is more precise and helps
monitoring.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows a privileged process to filter by socket mark when
dumping sockets via INET_DIAG_BY_FAMILY. This is useful on
systems that use mark-based routing such as Android.
The ability to filter socket marks requires CAP_NET_ADMIN, which
is consistent with other privileged operations allowed by the
SOCK_DIAG interface such as the ability to destroy sockets and
the ability to inspect BPF filters attached to packet sockets.
Tested: https://android-review.googlesource.com/261350
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes these compiler warnings via libc-compat.h when glibc netipx/ipx.h is
included before linux/ipx.h:
./linux/ipx.h:9:8: error: redefinition of ‘struct sockaddr_ipx’
./linux/ipx.h:26:8: error: redefinition of ‘struct ipx_route_definition’
./linux/ipx.h:32:8: error: redefinition of ‘struct ipx_interface_definition’
./linux/ipx.h:49:8: error: redefinition of ‘struct ipx_config_data’
./linux/ipx.h:58:8: error: redefinition of ‘struct ipx_route_def’
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel uapi header are supposed to use them. Fixes userspace compile error:
linux/openvswitch.h:583:2: error: unknown type name ‘uint32_t’
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compile error:
error: field ‘real’ has incomplete type
struct timeval real; /* real (wall-clock) time */
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compiler error:
error: unknown type name ‘uint32_t’
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation errors:
error: field ‘addr’ has incomplete type
struct sockaddr_in addr; /* IP address and port to send to */
error: field ‘addr’ has incomplete type
struct sockaddr_in6 addr; /* IP address and port to send to */
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation errors like:
error: field ‘addr’ has incomplete type
struct sockaddr_in addr; /* IP address and port to send to */
^
error: field ‘addr’ has incomplete type
struct sockaddr_in6 addr; /* IP address and port to send to */
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation errors like:
error: field ‘iph’ has incomplete type
error: field ‘prefix’ has incomplete type
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation error:
error: ‘IFNAMSIZ’ undeclared here (not in a function)
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the numgen expression that allows us to generated
incremental and random numbers, this generator is bound to a upper limit
that is specified by userspace.
This expression is useful to distribute packets in a round-robin fashion
as well as randomly.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds the quota expression. This new stateful expression
integrate easily into the dynset expression to build 'hashquota' flow
tables.
Arguably, we could use instead "counter bytes > 1000" instead, but this
approach has several problems:
1) We only support for one single stateful expression in dynamic set
definitions, and the expression above is a composite of two
expressions: get counter + comparison.
2) We would need to restore the packed counter representation (that we
used to have) based on seqlock to synchronize this, since per-cpu is
not suitable for this.
So instead of bloating the counter expression back with the seqlock
representation and extending the existing set infrastructure to make it
more complex for the composite described above, let's follow the more
simple approach of adding a quota expression that we can plug into our
existing infrastructure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This work adds a bpf_skb_change_tail() helper for tc BPF programs. The
basic idea is to expand or shrink the skb in a controlled manner. The
eBPF program can then rewrite the rest via helpers like bpf_skb_store_bytes(),
bpf_lX_csum_replace() and others rather than passing a raw buffer for
writing here.
bpf_skb_change_tail() is really a slow path helper and intended for
replies with f.e. ICMP control messages. Concept is similar to other
helpers like bpf_skb_change_proto() helper to keep the helper without
protocol specifics and let the BPF program mangle the remaining parts.
A flags field has been added and is reserved for now should we extend
the helper in future.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TIPC_NL_PEER_REMOVE netlink command. This command can remove
an offline peer node from the internal data structures.
This will be supported by the tipc user space tool in iproute2.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use one of the vlan xstats padding fields to export the vlan flags. This is
needed in order to be able to distinguish between master (bridge) and port
vlan entries in user-space when dumping the bridge vlan stats.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current vlan push action supports only vid and protocol options.
Add priority option.
Example script that adds vlan push action with vid and
priority:
tc filter add dev veth0 protocol ip parent ffff: \
flower \
indev veth0 \
action vlan push id 100 priority 5
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enhance flower to support 802.1Q vlan protocol classification.
Currently, the supported fields are vlan_id and vlan_priority.
Example:
# add a flower filter with vlan id and priority classification
tc filter add dev ens4f0 protocol 802.1Q parent ffff: \
flower \
indev ens4f0 \
vlan_ethtype ipv4 \
vlan_id 100 \
vlan_prio 3 \
action vlan pop
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor overlapping changes for both merge conflicts.
Resolution work done by Stephen Rothwell was used
as a reference.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
Fietkau.
2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.
3) Fix some tg3 ethtool logic bugs, and one that would cause no
interrupts to be generated when rx-coalescing is set to 0. From
Satish Baddipadige and Siva Reddy Kallam.
4) QLCNIC mailbox corruption and napi budget handling fix from Manish
Chopra.
5) Fix fib_trie logic when walking the trie during /proc/net/route
output than can access a stale node pointer. From David Forster.
6) Several sctp_diag fixes from Phil Sutter.
7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.
8) Checksum fixup fixes in bpf from Daniel Borkmann.
9) Memork leaks in nfnetlink, from Liping Zhang.
10) Use after free in rxrpc, from David Howells.
11) Use after free in new skb_array code of macvtap driver, from Jason
Wang.
12) Calipso resource leak, from Colin Ian King.
13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.
14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.
15) Fix lockdep splats in macsec, from Sabrina Dubroca.
16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
handling.
17) Various tc-action bug fixes, from CONG Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net_sched: allow flushing tc police actions
net_sched: unify the init logic for act_police
net_sched: convert tcf_exts from list to pointer array
net_sched: move tc offload macros to pkt_cls.h
net_sched: fix a typo in tc_for_each_action()
net_sched: remove an unnecessary list_del()
net_sched: remove the leftover cleanup_a()
mlxsw: spectrum: Allow packets to be trapped from any PG
mlxsw: spectrum: Unmap 802.1Q FID before destroying it
mlxsw: spectrum: Add missing rollbacks in error path
mlxsw: reg: Fix missing op field fill-up
mlxsw: spectrum: Trap loop-backed packets
mlxsw: spectrum: Add missing packet traps
mlxsw: spectrum: Mark port as active before registering it
mlxsw: spectrum: Create PVID vPort before registering netdevice
mlxsw: spectrum: Remove redundant errors from the code
mlxsw: spectrum: Don't return upon error in removal path
i40e: check for and deal with non-contiguous TCs
ixgbe: Re-enable ability to toggle VLAN filtering
ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
...
supersede our debugfs configuration interface in the long run. It is
especially necessary when batman-adv should be used in different
namespaces, since debugfs can not differentiate between those.
More specifically, the following changes are included:
- Two fixes for namespace handling by Andrew Lunn, checking also the
namespaces for parent interfaces, and supress debugfs entries
for non-default netns
- Implement various netlink commands for the new interface, by
Matthias Schiffer, Andrew Lunn, Sven Eckelmann and Simon Wunderlich
(13 patches):
* routing algorithm list
* hardif list
* translation tables (local and global)
* TTVN for the translation tables
* originator and neighbor tables for B.A.T.M.A.N. IV
and B.A.T.M.A.N. V
* gateway dump functionality for B.A.T.M.A.N. IV
and B.A.T.M.A.N. V
* Bridge Loop Avoidance claims, and corresponding BLA group
* Bridge Loop Avoidance backbone tables
- Finally, mark batman-adv as netns compatible, by Andrew Lunn (1 patch)
-----BEGIN PGP SIGNATURE-----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=KDfF
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20160816' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
pull request for net-next: batman-adv 2016-08-16
This feature patchset is all about adding netlink support, which should
supersede our debugfs configuration interface in the long run. It is
especially necessary when batman-adv should be used in different
namespaces, since debugfs can not differentiate between those.
More specifically, the following changes are included:
- Two fixes for namespace handling by Andrew Lunn, checking also the
namespaces for parent interfaces, and supress debugfs entries
for non-default netns
- Implement various netlink commands for the new interface, by
Matthias Schiffer, Andrew Lunn, Sven Eckelmann and Simon Wunderlich
(13 patches):
* routing algorithm list
* hardif list
* translation tables (local and global)
* TTVN for the translation tables
* originator and neighbor tables for B.A.T.M.A.N. IV
and B.A.T.M.A.N. V
* gateway dump functionality for B.A.T.M.A.N. IV
and B.A.T.M.A.N. V
* Bridge Loop Avoidance claims, and corresponding BLA group
* Bridge Loop Avoidance backbone tables
- Finally, mark batman-adv as netns compatible, by Andrew Lunn (1 patch)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Use struct gre_base_hdr directly in pptp_gre_header instead of
duplicated members;
2. Use existing macros like GRE_KEY, GRE_SEQ, and so on instead of
duplicated macros defined by PPTP;
3. Add new macros like GRE_IS_ACK/SEQ and so on instead of
PPTP_GRE_IS_A/S and so on;
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While hashing out BPF's current_task_under_cgroup helper bits, it came
to discussion that the skb_in_cgroup helper name was suboptimally chosen.
Tejun says:
So, I think in_cgroup should mean that the object is in that
particular cgroup while under_cgroup in the subhierarchy of that
cgroup. Let's rename the other subhierarchy test to under too. I
think that'd be a lot less confusing going forward.
[...]
It's more intuitive and gives us the room to implement the real
"in" test if ever necessary in the future.
Since this touches uapi bits, we need to change this as long as v4.8
is not yet officially released. Thus, change the helper enum and rename
related bits.
Fixes: 4a482f34af ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
Reference: http://patchwork.ozlabs.org/patch/658500/
Suggested-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
This adds a bpf helper that's similar to the skb_in_cgroup helper to check
whether the probe is currently executing in the context of a specific
subset of the cgroupsv2 hierarchy. It does this based on membership test
for a cgroup arraymap. It is invalid to call this in an interrupt, and
it'll return an error. The helper is primarily to be used in debugging
activities for containers, where you may have multiple programs running in
a given top-level "container".
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds mask for the Control register
10Mbps speed.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
- powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
- powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
- cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
- powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
- cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
- powerpc/vdso: Add missing include file from Guenter Roeck
- powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
- powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
- powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
- crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
- powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens
Benjamin Herrenschmidt:
- powerpc/32: Fix crash during static key init
- powerpc: Update obsolete comment in setup_32.c about early_init()
- powerpc: Print the kernel load address at the end of prom_init()
- powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
- powerpc/xics: Properly set Edge/Level type and enable resend
Mahesh Salgaonkar:
- powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
- powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
- powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
- powerpc/powernv: Load correct TOC pointer while waking up from winkle.
Andrew Donnellan:
- cxl: Fix sparse warnings
- cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
Michael Ellerman:
- selftests/powerpc: Specify we expect to build with std=gnu99
- powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
- powerpc/pci: Fix endian bug in fixed PHB numbering
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gw2z
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some powerpc fixes for 4.8:
Misc:
- powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
- powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
- powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
- cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
- powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
- cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
- powerpc/vdso: Add missing include file from Guenter Roeck
- powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
- powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
- powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
- crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
- powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens
Benjamin Herrenschmidt:
- powerpc/32: Fix crash during static key init
- powerpc: Update obsolete comment in setup_32.c about early_init()
- powerpc: Print the kernel load address at the end of prom_init()
- powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
- powerpc/xics: Properly set Edge/Level type and enable resend
Mahesh Salgaonkar:
- powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
- powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
- powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
- powerpc/powernv: Load correct TOC pointer while waking up from winkle.
Andrew Donnellan:
- cxl: Fix sparse warnings
- cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
Michael Ellerman:
- selftests/powerpc: Specify we expect to build with std=gnu99
- powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
- powerpc/pci: Fix endian bug in fixed PHB numbering"
* tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits)
selftests/powerpc: Specify we expect to build with std=gnu99
powerpc/vdso: Fix build rules to rebuild vdsos correctly
powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
powerpc/32: Fix crash during static key init
powerpc: Update obsolete comment in setup_32.c about early_init()
powerpc: Print the kernel load address at the end of prom_init()
powerpc/ptrace: Fix coredump since ptrace TM changes
powerpc/32: Fix csum_partial_copy_generic()
cxl: Set psl_fir_cntl to production environment value
powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
powerpc/pci: Fix endian bug in fixed PHB numbering
powerpc/eeh: Switch to conventional PCI address output in EEH log
cxl: Fix sparse warnings
cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
cxl: Use fixed width predefined types in data structure.
powerpc/vdso: Add missing include file
powerpc: Fix unused function warning 'lmb_to_memblock'
powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
...
This patch adds a new hash expression, this provides jhash support but
this can be extended to support for other hash functions. The modulus
and seed already comes embedded into this new expression.
Use case example:
... meta mark set hash ip saddr mod 10
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The PPTP is encapsulated by GRE header with that GRE_VERSION bits
must contain one. But current GRE RPS needs the GRE_VERSION must be
zero. So RPS does not work for PPTP traffic.
In my test environment, there are four MIPS cores, and all traffic
are passed through by PPTP. As a result, only one core is 100% busy
while other three cores are very idle. After this patch, the usage
of four cores are balanced well.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Use mod_timer_pending() to avoid reactivating a dead expectation in
the h323 conntrack helper, from Liping Zhang.
2) Oneliner to fix a type in the register name defined in the nf_tables
header.
3) Don't try to look further when we find an inactive elements with no
descendants in the rbtree set implementation, otherwise we crash.
4) Handle valid zero CSeq in the SIP conntrack helper, from
Christophe Leroy.
5) Don't display a trailing slash in conntrack helper with no classes
via /proc/net/nf_conntrack_expect, from Liping Zhang.
6) Fix an expectation leak during creation from the nfqueue path, again
from Liping Zhang.
7) Validate netlink port ID in verdict message from nfqueue, otherwise
an injection can be possible. Again from Zhang.
8) Reject conntrack tuples with different transport protocol on
original and reply tuples, also from Zhang.
9) Validate offset and length in nft_exthdr, make sure they are under
sizeof(u8), from Laura Garcia Liebana.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a regression introduced by commit b810253bd9 ("cxl:
Add mechanism for delivering AFU driver specific events").
It changes the type u8 to __u8 in the uapi header cxl.h, because the
former is a kernel internal type, and may not be defined in userland
build environments, in particular when cross-compiling libcxl on x86_64
linux machines (RHEL6.7 and Ubuntu 16.04).
This patch also changes the size of the field data_size, and makes it
constant, to support 32-bit userland applications running on big-endian
ppc64 kernels transparently.
mpe: This is an ABI change, however the ABI was only added during the
4.8 merge window so has never been part of a released kernel - therefore
we give ourselves permission to change it.
Fixes: b810253bd9 ("cxl: Add mechanism for delivering AFU driver specific events")
Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
