Tracing a workload that uses transactions gave a seg fault as follows:
perf record -e intel_pt// workload
perf report
Program received signal SIGSEGV, Segmentation fault.
0x000000000054b58c in intel_pt_reset_last_branch_rb (ptq=0x1a36110)
at util/intel-pt.c:929
929 ptq->last_branch_rb->nr = 0;
(gdb) p ptq->last_branch_rb
$1 = (struct branch_stack *) 0x0
(gdb) up
1148 intel_pt_reset_last_branch_rb(ptq);
(gdb) l
1143 if (ret)
1144 pr_err("Intel Processor Trace: failed to deliver transaction event
1145 ret);
1146
1147 if (pt->synth_opts.callchain)
1148 intel_pt_reset_last_branch_rb(ptq);
1149
1150 return ret;
1151 }
1152
(gdb) p pt->synth_opts.callchain
$2 = true
(gdb)
(gdb) bt
#0 0x000000000054b58c in intel_pt_reset_last_branch_rb (ptq=0x1a36110)
#1 0x000000000054c1e0 in intel_pt_synth_transaction_sample (ptq=0x1a36110)
#2 0x000000000054c5b2 in intel_pt_sample (ptq=0x1a36110)
Caused by checking the 'callchain' flag when it should have been the
'last_branch' flag. Fix that.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: f14445ee72 ("perf intel-pt: Support generating branch stack")
Link: http://lkml.kernel.org/r/1460977068-11566-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 9567366fef ("dm cache metadata: fix READ_LOCK macros and
cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in
cmd_read_lock(), yet up_read() is used to release the lock in
READ_UNLOCK(). Fix it.
Fixes: 9567366fef ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Samy <f.fallen45@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Here are some small char/misc driver fixes for 4.6-rc4. Full details
are in the shortlog, nothing major here.
These have all been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlcS4DQACgkQMUfUDdst+ylBIwCgtag4UtH2i+NwFiErDmmnokSz
h5oAn1488h1FTiXolyA9MnmRkWlf0ZPI
=aYD7
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc driver fixes for 4.6-rc4. Full details
are in the shortlog, nothing major here.
These have all been in linux-next for a while with no reported issues"
* tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: do not leak free page on kmalloc failure
lkdtm: fix memory leak of base
lkdtm: fix memory leak of val
extcon: palmas: Drop stray IRQF_EARLY_RESUME flag
Here are 3 small fixes 4.6-rc4. Two fix up some lz4 issues with big
endian systems, and the remaining one resolves a minor debugfs issue
that was reported.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlcS3ucACgkQMUfUDdst+ynw1QCbBGgbY7Xt08whNFcAP81z1Q5X
fmsAn1fyrhfsxe+JnybzswsTOjFw99Xd
=YX6h
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull misc fixes from Greg KH:
"Here are three small fixes for 4.6-rc4.
Two fix up some lz4 issues with big endian systems, and the remaining
one resolves a minor debugfs issue that was reported.
All have been in linux-next with no reported issues"
* tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
lib: lz4: cleanup unaligned access efficiency detection
lib: lz4: fixed zram with lz4 on big endian machines
debugfs: Make automount point inodes permanently empty
Here are some small USB fixes for 4.6-rc4.
Mostly xhci fixes for reported issues, a UAS bug that has hit a number
of people, including stable tree users, and a few other minor things.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlcS3ngACgkQMUfUDdst+ykPlgCeJ2UJu7dYz3ICVnxQ4zLkNG6A
yI0AoKa37VYqNkqRadj97g9E5S6KcsXi
=KmX3
-----END PGP SIGNATURE-----
Merge tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB fixes for 4.6-rc4.
Mostly xhci fixes for reported issues, a UAS bug that has hit a number
of people, including stable tree users, and a few other minor things.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: hcd: out of bounds access in for_each_companion
USB: uas: Add a new NO_REPORT_LUNS quirk
USB: uas: Limit qdepth at the scsi-host level
doc: usb: Fix typo in gadget_multi documentation
usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
usb: xhci: fix wild pointers in xhci_mem_cleanup
usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys
usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT
xhci: resume USB 3 roothub first
usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
cdc-acm: fix crash if flushed with nothing buffered
Okay we some driver fixes piled up, so time to get them up.
This time we have some odd fixes in hsu, edma, omap and xilinx.
Usual fixes and nothing special
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bSYQ
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This time we have some odd fixes in hsu, edma, omap and xilinx.
Usual fixes and nothing special"
* tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: fix master selection
dmaengine: edma: special case slot limit workaround
dmaengine: edma: Remove dynamic TPTC power management feature
dmaengine: vdma: don't crash when bad channel is requested
dmaengine: omap-dma: Do not suppress interrupts for memcpy
dmaengine: omap-dma: Fix polled channel completion detection and handling
dmaengine: hsu: correct use of channel status register
dmaengine: hsu: correct residue calculation of active descriptor
dmaengine: hsu: set HSU_CH_MTSR to memory width
Pull locking fixlet from Ingo Molnar:
"Fixes a build warning on certain Kconfig combinations"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix print_collision() unused warning
The variable is initialized and then conditionally set to a different
value, but not used when DWARF unwinding is not available, bummer, write
1000 times: "Run make -C tools/perf build-test"...
builtin-trace.c: In function ‘cmd_trace’:
builtin-trace.c:3112:6: error: variable ‘max_stack_user_set’ set but not
used [-Werror=unused-but-set-variable]
bool max_stack_user_set = true;
^
cc1: all warnings being treated as err
Fix it by marking it as __maybe_unused.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0561499326 ("perf trace: Make --(min,max}-stack imply "--call-graph dwarf"")
Link: http://lkml.kernel.org/n/tip-85r40c5hhv6jnmph77l1hgsr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Wire the callchain unwinding "max-stack" know to 'perf script --max-stack',
allowing to limit the depth of callchains, possibly reducing processing
time (Arnaldo Carvalho de Melo)
- Ditto for 'perf trace --max-stack' (Arnaldo Carvalho de Melo)
- Introduce a --min-stack filter for 'perf trace', to show syscalls that
had a userspace callchain leading to it at least min-stack deep (Arnaldo Carvalho de Melo)
- Make 'perf trace' work with multiple threads and the --duration filter,
i.e. do not print the start of an interrupted syscall followed by ...
to print interrupts from other threads, as we need to wait the sys_exit
syscall tracepoint to calculate the duration, duh. (Arnaldo Carvalho de Melo)
System wide --duration now works as expected:
[root@jouet ~]# trace --duration 100
152.393 (145.147 ms): Timer/24358 futex(uaddr: 0x7f5ed98e56cc, op: WAIT_BITSET|PRIV|CLKRT, val: 7055125, utime: 0x7f5ecdbfec30, val3: 4294967295) = -1 ETIMEDOUT Connection timed out
152.438 (145.040 ms): firefox/24321 poll(ufds: 0x7f5ec388b460, nfds: 6, timeout_msecs: 4294967295) = 1
358.580 (158.279 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x7ffdcbb63610) = 0 Timeout
358.687 (148.285 ms): gnome-terminal/2711 poll(ufds: 0x55b7e6811ad0, nfds: 15, timeout_msecs: 249) = 1
370.150 (169.569 ms): gnome-shell/2287 poll(ufds: 0x55e623d65490, nfds: 86, timeout_msecs: 4294967295) = 1
- Now 'perf trace's --max-stack and --min-stack will automatically set
"--call-graph dwarf", if --call-graph is not present on the command line:
[root@jouet ~]# perf trace -e nanosleep --max-stack 3 usleep 1
0.299 ( 0.057 ms): usleep/29658 nanosleep(rqtp: 0x7fff80f3b230) = 0
__nanosleep+0x10 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
[root@jouet ~]#
- Bump 'perf trace --mmap-pages' for root when using callchains and not
specifying --mmap-pages explicitely (Arnaldo Carvalho de Melo)
Build fixes:
- The python binding object had missing symbols, to some refactoring
to fix that (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+JhQ
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160415' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Wire the callchain unwinding "max-stack" now to 'perf script --max-stack',
allowing to limit the depth of callchains, possibly reducing processing
time (Arnaldo Carvalho de Melo)
- Ditto for 'perf trace --max-stack' (Arnaldo Carvalho de Melo)
- Introduce a --min-stack filter for 'perf trace', to show syscalls that
had a userspace callchain leading to it at least min-stack deep (Arnaldo Carvalho de Melo)
- Make 'perf trace' work with multiple threads and the --duration filter,
i.e. do not print the start of an interrupted syscall followed by ...
to print interrupts from other threads, as we need to wait the sys_exit
syscall tracepoint to calculate the duration, duh. (Arnaldo Carvalho de Melo)
System wide --duration now works as expected:
[root@jouet ~]# trace --duration 100
152.393 (145.147 ms): Timer/24358 futex(uaddr: 0x7f5ed98e56cc, op: WAIT_BITSET|PRIV|CLKRT, val: 7055125, utime: 0x7f5ecdbfec30, val3: 4294967295) = -1 ETIMEDOUT Connection timed out
152.438 (145.040 ms): firefox/24321 poll(ufds: 0x7f5ec388b460, nfds: 6, timeout_msecs: 4294967295) = 1
358.580 (158.279 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x7ffdcbb63610) = 0 Timeout
358.687 (148.285 ms): gnome-terminal/2711 poll(ufds: 0x55b7e6811ad0, nfds: 15, timeout_msecs: 249) = 1
370.150 (169.569 ms): gnome-shell/2287 poll(ufds: 0x55e623d65490, nfds: 86, timeout_msecs: 4294967295) = 1
- Now 'perf trace's --max-stack and --min-stack will automatically set
"--call-graph dwarf", if --call-graph is not present on the command line:
[root@jouet ~]# perf trace -e nanosleep --max-stack 3 usleep 1
0.299 ( 0.057 ms): usleep/29658 nanosleep(rqtp: 0x7fff80f3b230) = 0
__nanosleep+0x10 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
[root@jouet ~]#
- Bump 'perf trace --mmap-pages' for root when using callchains and not
specifying --mmap-pages explicitely (Arnaldo Carvalho de Melo)
Build fixes:
- The python binding object had missing symbols, to some refactoring
to fix that (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull block fixes from Jens Axboe:
"A few fixes for the current series. This contains:
- Two fixes for NVMe:
One fixes a reset race that can be triggered by repeated
insert/removal of the module.
The other fixes an issue on some platforms, where we get probe
timeouts since legacy interrupts isn't working. This used not to
be a problem since we had the worker thread poll for completions,
but since that was killed off, it means those poor souls can't
successfully probe their NVMe device. Use a proper IRQ check and
probe (msi-x -> msi ->legacy), like most other drivers to work
around this. Both from Keith.
- A loop corruption issue with offset in iters, from Ming Lei.
- A fix for not having the partition stat per cpu ref count
initialized before sending out the KOBJ_ADD, which could cause user
space to access the counter prior to initialization. Also from
Ming Lei.
- A fix for using the wrong congestion state, from Kaixu Xia"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: loop: fix filesystem corruption in case of aio/dio
NVMe: Always use MSI/MSI-x interrupts
NVMe: Fix reset/remove race
writeback: fix the wrong congested state variable definition
block: partition: initialize percpuref before sending out KOBJ_ADD
Pull libnvdimm fixes from Ross Zwisler:
"Two fixes:
- Fix memcpy_from_pmem() to fallback to memcpy() for architectures
where CONFIG_ARCH_HAS_PMEM_API=n.
- Add a comment explaining why we write data twice when clearing
poison in pmem_do_bvec().
This has passed a boot test on an X86_32 config, which was the
architecture where issue #1 above was first noticed"
Dan Williams adds:
"We're giving this multi-maintainer setup a shot, so expect libnvdimm
pull requests from either Ross or I going forward"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, pmem: clarify the write+clear_poison+write flow
pmem: fix BUG() error in pmem.h:48 on X86_32
In the v4.4 cycle, we relaxed the requirement for assigning mtd->owner, but we
didn't remove this error case. It's hit only by drivers that are both:
(a) using nand_scan() directly and
(b) built as modules
We haven't seen explicit complaints about this (most use cases don't fit one or
both of the above), but we should definitely not be BUG()'ing here.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wxaC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20160415' of git://git.infradead.org/linux-mtd
Pull MTD fix from Brian Norris:
"One MTD fix for v4.6-rc4:
In the v4.4 cycle, we relaxed the requirement for assigning
mtd->owner, but we didn't remove this error case. It's hit only
by drivers that are both:
(a) using nand_scan() directly
and
(b) built as modules
We haven't seen explicit complaints about this (most use cases don't
fit one or both of the above), but we should definitely not be
BUG()'ing here"
* tag 'for-linus-20160415' of git://git.infradead.org/linux-mtd:
mtd: nand: Drop mtd.owner requirement in nand_scan
- Restore similar old behaviour when assigning mmcblk device indexes
MMC host:
- tegra: Disable UHS-I modes for Tegra124 to fix regression
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nnxN
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.6-rc3' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.6 rc4.
Regarding the fix for the regression about mmcblk device indexes. The
approach taken to solve the problem seems to be good enough. There
were some discussions around the solution, but it seems like people
were happy about it in the end.
MMC core:
- Restore similar old behaviour when assigning mmcblk device indexes
MMC host:
- tegra: Disable UHS-I modes for Tegra124 to fix regression"
* tag 'mmc-v4.6-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: tegra: Disable UHS-I modes for Tegra124
mmc: block: Use the mmc host device index as the mmcblk device index
Pull drm fixes from Dave Airlie:
"This contains fixes for exynos, amdgpu, radeon, i915 and qxl.
It also contains some fixes to the core drm edid parser.
qxl:
- fix for a cursor hotspot issue
radeon:
- some MST fixes that I've been running locally and make my monitor a
bit happier
exynos:
- fix some regressions and build fixes
amdgpu:
- a couple of small fixes
i915:
- two DP MST fixes and a couple of other regression fixes
Nothing too out of the ordinary or surprising at this point"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependency
drm/exynos: fix a warning message
drm/exynos: mic: fix an error code
drm/exynos: fimd: fix broken dp_clock control
drm/exynos: build fbdev code conditionally
drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_set
drm/exynos: fix error handling in exynos_drm_subdrv_open
drm/amd/amdgpu: fix irq domain remove for tonga ih
drm/i915: fix deadlock on lid open
drm/radeon: use helper for mst connector dpms.
drm/radeon/mst: port some MST setup code from DAL.
drm/amdgpu: add invisible pin size statistic
drm/edid: Fix DMT 1024x768@43Hz (interlaced) timings
drm/i915: Exit cherryview_irq_handler() after one pass
drm/i915: Call intel_dp_mst_resume() before resuming displays
drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
drm/edid: Fix parsing of EDID 1.4 Established Timings III descriptor
drm/edid: Fix EDID Established Timings I and II
drm/qxl: fix cursor position with non-zero hotspot
Pull parisc ftrace fixes from Helge Deller:
"This is (most likely) the last pull request for v4.6 for the parisc
architecture.
It fixes the FTRACE feature for parisc, which is horribly broken since
quite some time and doesn't even compile. This patch just fixes the
bare minimum (it actually removes more lines than it adds), so that
the function tracer works again on 32- and 64bit kernels.
I've queued up additional patches on top of this patch which e.g. add
the syscall tracer, but those have to wait for the merge window for
v4.7."
* 'parisc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix ftrace function tracer
The ACPI specification does not specify the state of data after a clear
poison operation. Potential future libnvdimm bus implementations for
other architectures also might not specify or disagree on the state of
data after clear poison. Clarify why we write twice.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
To reduce the chances we'll overflow the mmap buffer, manual fine tuning
trumps this.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wxygbxmp1v9mng1ea28wet02@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the user doesn't set --mmap-pages, perf_evlist__mmap() will do it
by reading the maximum possible for a non-root user from the
/proc/sys/kernel/perf_event_mlock_kb file.
Expose that function so that 'perf trace' can, for root users, to bump
mmap-pages to a higher value for root, based on the contents of this
proc file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xay69plylwibpb3l4isrpl1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If one uses:
# perf trace --min-stack 16
Then it implicitly means that callgraphs should be enabled, and the best
option in terms of widespread availability is "dwarf".
Further work needed to choose a better alternative, LBR, in capable
systems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xtjmnpkyk42npekxz3kynzmx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be able to call it outside option parsing, like when setting a
default --call-graph parameter in 'perf trace' when just --min-stack is
used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xay69plylwibpb3l4isrpl1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting from commit e36f620428(block: split bios to max possible length),
block core starts to split bio in the middle of bvec.
Unfortunately loop dio/aio doesn't consider this situation, and
always treat 'iter.iov_offset' as zero. Then filesystem corruption
is observed.
This patch figures out the offset of the base bvevc via
'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset
to iov iterator.
Fixes: e36f620428 (block: split bios to max possible length)
Cc: Keith Busch <keith.busch@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org (4.5)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a binutils fix, an lguest fix, an mcelog fix and a missing
documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid using object after free in genpool
lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
x86/build: Build compressed x86 kernels as PIE
x86/mm/pkeys: Add missing Documentation
Pull mm gup cleanup from Ingo Molnar:
"This removes the ugly get-user-pages API hack, now that all upstream
code has been migrated to it"
("ugly" is putting it mildly. But it worked.. - Linus)
* 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs
- stable@ fix for DM cache metadata's READ_LOCK macros that were
incorrectly returning error if the block manager was in read-only
mode; also cleanup multi-statement macros to use do {} while(0)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXEA8BAAoJEMUj8QotnQNauNoH/i5bVVPZTMKA3wzCpziuP08X
V5E9nLhd+Lvng05AZLsrTeIdvDfS7eAPQyFkPY9NpvzoJEAL0ft6bjGdaDTH090u
Y4mn08BcCwCzaJL41u43TGe3+iRZfUA/W7uu80SSaTuKq7EFeRha+LfyOUCwrNcT
P5LEPsl7EKhan3K3+9BrnX3IPG1MwswDAt9Sw0e83cyhFH5Xzy5AkygaSgHSamvf
/LJ3Hid8kCbdGseODJQ+sVg957+5H4mpZ3VUaTek/+DurCPpMFCxNQJTv2nxTd4h
AiEh+ed/RGzAP8hrZdtQTqKjc6ILiR0tRCtYX9WHDXLklkiJ5ZGKMgKyyrZYrzo=
=lzmV
-----END PGP SIGNATURE-----
Merge tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- fix a 4.6-rc1 bio-based DM 'struct dm_target_io' leak in an error
path
- stable@ fix for DM cache metadata's READ_LOCK macros that were
incorrectly returning error if the block manager was in read-only
mode; also cleanup multi-statement macros to use do {} while(0)
* tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
dm: fix dm_target_io leak if clone_bio() returns an error
A single one-line fix to turn the regmap cache from an RB-tree to a flat
cache to avoid lockdep and abort issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=T3Vh
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"A single one-line fix to turn the regmap cache from an RB-tree to a
flat cache to avoid lockdep and abort issues"
* tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: fsl-ftm: Use flat regmap cache
we've had a very calm development cycle, so far. Here are the few
fixes for HD-audio and USB-audio, all of which are small and easy.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PYqq
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We've had a very calm development cycle, so far. Here are the few
fixes for HD-audio and USB-audio, all of which are small and easy"
* tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix inconsistent monitor_present state until repoll
ALSA: hda - Fix regression of monitor_present flag in eld proc file
ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
ALSA: sscape: Use correct format identifier for size_t
ALSA: usb-audio: Add a quirk for Plantronics BT300
ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
ALSA: hda - Bind with i915 only when Intel graphics is present
Pull mailbox fixes from Jussi Brar:
"Misc fixes:
mailbox-test driver:
- prevent memory leak and another cosmetic change
mailbox:
- change the returned error code
Xgene driver:
- return -ENOMEM instead of PTR_ERR for failed devm_kzalloc"
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Stop using ENOSYS for anything other than unimplemented syscalls
mailbox: mailbox-test: Prevent memory leak
mailbox: mailbox-test: Use more consistent format for calling copy_from_user()
mailbox: xgene-slimpro: Fix wrong test for devm_kzalloc
These patches fix f2fs and fscrypto based on -rc3 bug fixes in ext4 crypto,
which have not yet been fully propagated as follows.
- use of dget_parent and file_dentry to avoid crashes
- disallow RCU-mode lookup in d_invalidate
- disallow -ENOMEM in the core data encryption path
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ML1+
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs/fscrypto fixes from Jaegeuk Kim:
"In addition to f2fs/fscrypto fixes, I've added one patch which
prevents RCU mode lookup in d_revalidate, as Al mentioned.
These patches fix f2fs and fscrypto based on -rc3 bug fixes in ext4
crypto, which have not yet been fully propagated as follows.
- use of dget_parent and file_dentry to avoid crashes
- disallow RCU-mode lookup in d_invalidate
- disallow -ENOMEM in the core data encryption path"
* tag 'for-linus-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
ext4/fscrypto: avoid RCU lookup in d_revalidate
fscrypto: don't let data integrity writebacks fail with ENOMEM
f2fs: use dget_parent and file_dentry in f2fs_file_open
fscrypto: use dget_parent() in fscrypt_d_revalidate()
Pull crypto fixes from Herbert Xu:
"This fixes an NFS regression caused by the skcipher/hash conversion in
sunrpc. It also fixes a build problem in certain configurations with
bcm63xx"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: bcm63xx - fix device tree compilation
sunrpc: Fix skcipher/shash conversion
Pull keys bugfixes from James Morris:
"Two bugfixes for Keys related code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ASN.1: fix open failure check on headername
assoc_array: don't call compare_object() on a node
They still use functions that would drag more stuff to the python
binding, where these fprintf methods are not used, so separate it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xfp0mgq3hh3px61di6ixi1jk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to the one in the other tools (report, script, top).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lh7kk5a5t3erwxw31ah0cgar@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Works just like with 'perf report'. In some cases we may want to have
more than 127 entries, the default maximum.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mqkz2p5ok2978gztb0vsnocc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not used at all, nuke it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jf2w8ce8nl3wso3vuodg5jci@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way the print routine merely does printing, not requiring access to
the resolving machinery, which helps disentangling the object files and
easing creating subsets with a limited functionality set.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2ti2jbra8fypdfawwwm3aee3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To disentangle symbol printing from all the code related to symbol
tables, resolution of addresses to symbols, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eik9g3hbtdc7ddv57f1d4v3p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The READ_LOCK macro was incorrectly returning -EINVAL if
dm_bm_is_read_only() was true -- it will always be true once the cache
metadata transitions to read-only by dm_cache_metadata_set_read_only().
Wrap READ_LOCK and WRITE_LOCK multi-statement macros in do {} while(0).
Also, all accesses of the 'cmd' argument passed to these related macros
are now encapsulated in parenthesis.
A follow-up patch can be developed to eliminate the use of macros in
favor of pure C code. Avoiding that now given that this needs to apply
to stable@.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes: d14fcf3dd7 ("dm cache: make sure every metadata function checks fail_io")
Cc: stable@vger.kernel.org
Multiple users have reported device initialization failure due the driver
not receiving legacy PCI interrupts. This is not unique to any particular
controller, but has been observed on multiple platforms.
There have been no issues reported or observed when with message signaled
interrupts, so this patch attempts to use MSI-x during initialization,
falling back to MSI. If that fails, legacy would become the default.
The setup_io_queues error handling had to change as a result: the admin
queue's msix_entry used to be initialized to the legacy IRQ. The case
where nr_io_queues is 0 would fail request_irq when setting up the admin
queue's interrupt since re-enabling MSI-x fails with 0 vectors, leaving
the admin queue's msix_entry invalid. Instead, return success immediately.
Reported-by: Tim Muhlemmer <muhlemmer@gmail.com>
Reported-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In commit c4004b02f8 ("x86: remove the kernel code/data/bss resources
from /proc/iomem") I was hoping to remove the phyiscal kernel address
data from /proc/iomem entirely, but that had to be reverted because some
system programs actually use it.
This limits all the detailed resource information to properly
credentialed users instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The PCI config access checked the file capabilities correctly, but used
the itnernal security capability check rather than the helper function
that is actually meant for that.
The security_capable() has unusual return values and is not meant to be
used elsewhere (the only other use is in the capability checking
functions that we actually intend people to use, and this odd PCI usage
really stood out when looking around the capability code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A lot of seqfile users seem to be using things like %pK that uses the
credentials of the current process, but that is actually completely
wrong for filesystem interfaces.
The unix semantics for permission checking files is to check permissions
at _open_ time, not at read or write time, and that is not just a small
detail: passing off stdin/stdout/stderr to a suid application and making
the actual IO happen in privileged context is a classic exploit
technique.
So if we want to be able to look at permissions at read time, we need to
use the file open credentials, not the current ones. Normal file
accesses can just use "f_cred" (or any of the helper functions that do
that, like file_ns_capable()), but the seqfile interfaces do not have
any such options.
It turns out that seq_file _does_ save away the user_ns information of
the file, though. Since user_ns is just part of the full credential
information, replace that special case with saving off the cred pointer
instead, and suddenly seq_file has all the permission information it
needs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
