Many GEN9 boards come with on-board lspcon cards.
Fot these boards, VBT configuration should properly point out
if a particular port contains lspcon device, so that driver can
initialize it properly.
This patch adds a utility function, which checks the VBT flag
for lspcon bit, and tells us if a port is configured to have a
lspcon device or not.
V2: Fixed review comments from Ville
- Do not forget PORT_D while checking lspcon for GEN9
V3: Addressed review comments from Rodrigo
- Create a HAS_LSPCON() macro for better use case handling.
- Do not dump warnings for non-gen-9 platforms, it will be noise.
V4: Rebase
V5: Rebase
V6: Pass dev_priv to HAS_LSPCON() macro
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-4-git-send-email-shashank.sharma@intel.com
This patch adds a new file, to accommodate lspcon support
for I915 driver. These functions probe, detect, initialize
and configure an on-board lspcon device during the driver
init time.
Also, this patch adds a small structure for lspcon device,
which will provide the runtime status of the device.
V2: addressed ville's review comments
- Clean the leftover macros from previous patch set
V3: Rebase
V4: addressed ville's review comments
- make internal functions static
- remove lspcon_detect_identifier, make it inline with lspcon_probe
- remove is_lspcon_active function
- remove force check while setting a lspcon mode
V5: Rebase
V6: Pass dev_priv to IS_GEN9 check
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476455212-27893-3-git-send-email-shashank.sharma@intel.com
This patch adds lspcon support in dp_dual_mode helper.
lspcon is essentially a dp->hdmi dongle with dual personality.
LS mode: It works as a passive dongle, by level shifting DP++
signals to HDMI signals, in LS mode.
PCON mode: It works as a protocol converter active dongle
in pcon mode, by converting DP++ outputs to HDMI 2.0 outputs.
This patch adds support for lspcon detection and mode set
switch operations, as a dp dual mode dongle.
v2: Addressed review comments from Ville
- add adaptor id for lspcon devices (0x08), use it to identify lspcon
- change function names
old: drm_lspcon_get_current_mode/drm_lspcon_change_mode
new: drm_lspcon_get_mode/drm_lspcon_set_mode
- change drm_lspcon_get_mode type to int, to match
drm_dp_dual_mode_get_tmds_output
- change 'err' to 'ret' to match the rest of the functions
- remove pointless typecasting during call to dual_mode_read
- fix the but while setting value of data, while writing lspcon mode
- fix indentation
- change mdelay(10) -> msleep(10)
- return ETIMEDOUT instead of EFAULT, when lspcon mode change times out
- Add an empty line to separate std regs macros and lspcon regs macros
Indent bit definition
v3: Addressed review comments from Rodrigo
- change macro name from DP_DUAL_MODE_TYPE_LSPCON to
DP_DUAL_MODE_TYPE_HAS_DPCD for better readability
- change macro name from DP_DUAL_MODE_LSPCON_MODE_PCON to
DP_DUAL_MODE_LSPCON_MODE_PCON for better readability
- add comment for MCA specific offsets like 0x40 and 0x41
- remove DP_DUAL_MODE_REV_TYPE2 check while checking lspcon adapter id
v4: Addressed review comments from Ville
- Fixed indentation at few places
- s/current_mode/mode
- s/reqd_mode/mode
- remove unnecessary void* cast
- remove drm_edid.h from includes
- Add a comment for _HAS_DPCD
- Fix enum description, for lspcon_mode.
v5: Rebase
v6: Rebase
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476720277-16298-1-git-send-email-shashank.sharma@intel.com
GMBUS is part of the display engine, and thus has no need for
forcewake. Let's not bother trying to grab it then.
I don't recall if the display engine suffers from system hangs
due to multiple accesses to the same "cacheline" in mmio space.
I hope not since we're no longer protected by the uncore lock
since commit 4e6c2d58ba ("drm/i915: Take forcewake once for
the entire GMBUS transaction")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476272687-15070-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Zhenyu Wang writes:
This is first pull request to merge GVT-g device model in i915
which contains core GVT-g device model work to virtualize GPU
resources. This tries to add feature of Intel GVT-g technology
for full GPU virtualization. This version will support KVM based
virtualization solution named as KVMGT.
More background is on official project home: https://01.org/igvt-g
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This function is a wreck, let's help it get its life back together and
cleanup all of the copy pasta here.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Having skl_wm_level contain all of the watermarks for each plane is
annoying since it prevents us from having any sort of object to
represent a single watermark level, something we take advantage of in
the next commit to cut down on all of the copy paste code in here.
Changes since v1:
- Style nitpicks
- Fix accidental usage of i vs. PLANE_CURSOR
- Split out skl_pipe_wm_active_state simplification into separate patch
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Next part of cleaning up the watermark code for skl. This is easy, since
it seems that we never actually needed to keep track of the linetime in
the skl_wm_values struct anyway.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
First part of cleaning up all of the skl watermark code. This moves the
structures for storing the ddb allocations of each pipe into
intel_crtc_state, along with moving the structures for storing the
current ddb allocations active on hardware into intel_crtc.
Changes since v1:
- Don't replace alloc->start = alloc->end = 0;
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
I have re-ordered some struct members in patch:
commit 44a655cae3
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Thu Oct 13 11:09:23 2016 +0100
drm/i915: Shrink cxsr_latency_table
but that particular one is not initialized with named
initializers which broke it.
Move the bitfields back at the beginning. Space saving
is still there.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 44a655cae3 ("drm/i915: Shrink cxsr_latency_table")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476453302-7580-1-git-send-email-tvrtko.ursulin@linux.intel.com
Since "Dynamic page table allocations" were introduced, our page tables
can grow (being dynamically allocated) with address space range usage.
Unfortunately, their lifetime is bound to vm. This is not a huge problem
when we're not using softpin - drm_mm is creating an upper bound on used
range by causing addresses for our VMAs to eventually be reused.
With softpin, long lived contexts can drain the system out of memory
even with a single "small" object. For example:
bo = bo_alloc(size);
while(true)
offset += size;
exec(bo, offset);
Will cause us to create new allocations until all memory in the system
is used for tracking GPU pages (even though almost all PTEs in this vm
are pointing to scratch).
Let's free unused page tables in clear_range to prevent this - if no
entries are used, we can safely free it and return this information to
the caller (so that higher-level entry is pointing to scratch).
v2: Document return value and free semantics (Joonas)
v3: No newlines in vars block (Joonas)
v4: Drop redundant local 'reduce' variable
v5: Handle CI fail with enable_ppgtt=2
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-3-git-send-email-michal.winiarski@intel.com
Let's use more top-down approach, where each gen8_ppgtt_clear_* function
is responsible for clearing the struct passed as an argument and calling
relevant clear_range functions on lower-level tables.
Doing this rather than operating on PTE ranges makes the implementation
of shrinking page tables quite simple.
v2: Drop min when calculating num_entries, no negation in 48b ppgtt
check, no newlines in vars block (Joonas)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-2-git-send-email-michal.winiarski@intel.com
We never used any invalid ptes, those were put in place for
a possibility of doing gpu faults. However our batchbuffers are not
restricted in length, so everything needs to be pointing to something
and thus out-of-bounds is pointing to scratch.
Remove the valid flag as it is always true.
v2: Expand commit msg, patch reorder (Mika)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-1-git-send-email-michal.winiarski@intel.com
Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.
Fixes: 85e9067933 ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
Saves 944 bytes of .rodata strings and 128 bytes of .text.
v2: Add parantheses around dev_priv. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Saves 864 bytes of .rodata strings and ~100 of .text.
v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Saves 1392 bytes of .rodata strings.
Also change a few function/macro prototypes in i915_gem_gtt.c
from dev to dev_priv where it made more sense to do so.
v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Mention function prototype changes. (David Weinehall)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Saves 1016 bytes of .rodata strings and couple hundred of .text.
v2: Add parantheses around dev_priv. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This saves 3248 bytes of .rodata strings.
v2: Add parantheses around dev_priv. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This patch introduces a command scanner to scan guest command buffers.
Signed-off-by: Yulei Zhang <yulei.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
As different VM may configure different render MMIOs when executing
workload, to schedule workloads between different VM, the render MMIOs
have to be switched.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces a vGPU schedule policy framework, with a timer based
schedule policy module for now
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces the vGPU workload scheduler routines.
GVT workload scheduler is responsible for picking and executing GVT workload
from current scheduled vGPU. Before the workload is submitted to host i915,
the guest execlist context will be shadowed in the host GVT shadow context.
the instructions in guest ring buffer will be copied into GVT shadow ring
buffer. Then GVT-g workload scheduler will scan the instructions in guest
ring buffer and submit it to host i915.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces the vGPU workload submission logics.
Under virtualization environment, guest will submit workload through
virtual execlist submit port. The submitted workload load will be wrapped
into an gvt workload which will be picked by GVT workload scheduler and
executed on host i915 later.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces the vGPU execlist virtualization.
Under virtulization environment, HW execlist interface are fully emulated
including virtual CSB emulation, virtual execlist emulation. The framework
will emulate the virtual CSB according to the guest workload running status
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces the GVT-g display virtualization.
It consists a collection of display MMIO handlers, like power well register
handler, pipe register handler, plane register handler, which will emulate
all display MMIOs behavior to support virtual mode setting sequence for
guest.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces the generic vGPU MMIO emulation intercept
framework. The MPT modules will request GVT-g core logic to
emulate MMIO read/write through IO emulation operations
callback when hypervisor trapped a guest GTTMMIO read/write.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces vGPU PCI configuration space virtualization.
- Adjust the trapped GPFN(Guest Page Frame Number) window of virtual GEN
PCI BAR 0 when guest initializes PCI BAR 0 address.
- Emulate OpRegion when guest touches OpRegion.
- Pass-through a part of aperture to guest when guest initializes
aperture BAR.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The vGPU graphics memory emulation framework is responsible for graphics
memory table virtualization. Under virtualization environment, a VM will
populate the page table entry with guest page frame number(GPFN/GFN), while
HW needs a page table filled with MFN(Machine frame number). The
relationship between GFN and MFN(Machine frame number) is managed by
hypervisor, while GEN HW doesn't have such knowledge to translate a GFN.
To solve this gap, shadow GGTT/PPGTT page table is introdcued.
For GGTT, the GFN inside the guest GGTT page table entry will be translated
into MFN and written into physical GTT MMIO registers when guest write
virtual GTT MMIO registers.
For PPGTT, a shadow PPGTT page table will be created and write-protected
translated from guest PPGTT page table. And the shadow page table root
pointers will be written into the shadow context after a guest workload
is shadowed.
vGPU graphics memory emulation framework consists:
- Per-GEN HW platform page table entry bits extract/de-extract routines.
- GTT MMIO register emulation handlers, which will call hypercall to do
GFN->MFN translation when guest write GTT MMIO register
- PPGTT shadow page table routines, e.g. shadow create/destroy/out-of-sync
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces vGPU interrupt emulation framework.
The vGPU intrerrupt emulation framework is an event-based interrupt
emulation framework. It's responsible for emulating GEN hardware interrupts
during emulating other HW behaviour.
It consists several components:
- Descriptions of interrupt register bit
- Upper level <-> lower level interrupt mapping
- GEN HW IER/IMR/IIR register emulation routines
- Event-based interrupt propagation interface
When a GVT-g component wants to inject an interrupt to a VM during a
emulation, first it should specify the event needs to be emulated and the
framework will deal with the rest of emulation:
- Generating related virtual IIR bit according to virtual IER and IMRs,
- Generate related virtual upper level virtual IIR bit accodring to the
per-platform interrupt mapping
- Injecting a MSI to VM
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
A vGPU represents a virtual Intel GEN hardware, which consists following
virtual resources:
- Configuration space (virtualized)
- HW registers (virtualized)
- GGTT memory space (partitioned)
- GPU page table (shadowed)
- Fence registers (partitioned)
* virtualized: fully emulated by GVT-g.
* partitioned: Only a part of the HW resource is allowed to be accessed
by VM.
* shadowed: Resource needs to be translated and shadowed before getting
applied into HW.
This patch introduces vGPU life cycle management framework, which is
responsible for creating/destroying a vGPU and preparing/free resources
related to a vGPU.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
