Commit Graph

666 Commits

Author SHA1 Message Date
Linus Torvalds
e7de369050 Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input 2006-01-14 09:49:16 -08:00
Vojtech Pavlik
3dd01a8311 Input: i8042 - add Sony Vaio FSC-115b to MUX blacklist
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-14 00:24:06 -05:00
Russell King
30226f8199 [PATCH] Add serio bus_type probe and remove methods
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:07 -08:00
Alan Cox
33f0f88f1c [PATCH] TTY layer buffering revamp
The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.

This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.

When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.

For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).

Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.

The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.

I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.

Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real.  That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.

Description:

tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification].  It
does now also return the number of chars inserted

There are also

tty_buffer_request_room(tty, len)

which asks for a buffer block of the length requested and returns the space
found.  This improves efficiency with hardware that knows how much to
transfer.

and tty_insert_flip_string_flags(tty, str, flags, len)

to insert a string of characters and flags

For a smart interface the usual code is

    len = tty_request_buffer_room(tty, amount_hardware_says);
    tty_insert_flip_string(tty, buffer_from_card, len);

More description!

At the moment tty buffers are attached directly to the tty.  This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)

I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers.  This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.

So far so good.  Lots of drivers reference tty->flip.*.  Several of them also
call directly and unsafely into function pointers it provides.  This will all
break.  Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.

At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say

 int tty_buffer_request_room(tty, size)

Try and ensure at least size bytes are available, returns actual room (may be
zero).  At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative.  (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space.  The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.

 int tty_insert_flip_char(tty, ch, flag)

As before insert a character if there is room.  Now returns 1 for success, 0
for failure.

 int tty_insert_flip_string(tty, str, len)

Insert a block of non error characters.  Returns the number inserted.

 int tty_prepare_flip_string(tty, strptr, len)

Adjust the buffer to allow len characters to be added.  Returns a buffer
pointer in strptr and the length available.  This allows for hardware that
needs to use functions like insl or mencpy_fromio.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:59 -08:00
Russell King
e9368f8288 [ARM] Remove asm/irq.h includes from ARM drivers
Many ARM drivers do not need to include asm/irq.h - remove this
unnecessary include from some ARM drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 13:56:42 +00:00
Linus Torvalds
b9abaa3fb7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2006-01-07 11:29:51 -08:00
Russell King
f8ce25476d [ARM] Move asm/hardware/clock.h to linux/clk.h
This is needs to be visible to other architectures using the AMBA
bus and peripherals.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 16:15:52 +00:00
Russell King
123656d4cc Merge with Linus' kernel. 2006-01-07 14:40:05 +00:00
Russell King
a62c80e559 [ARM] Move AMBA include files to include/linux/amba/
Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use.  Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 13:52:45 +00:00
Ben Collins
6020bafc9e Input: i8042 - add OQO Zepto to noloop dmi table.
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-05 23:00:38 -05:00
Dmitry Torokhov
fed8bf19ec Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2006-01-05 22:25:13 -05:00
Kay Sievers
312c004d36 [PATCH] driver core: replace "hotplug" by "uevent"
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Russell King
a8d3584a2d [ARM] Remove clk_use()/clk_unuse()
It seems that clk_use() and clk_unuse() are additional complexity
which isn't required anymore.  Remove them from the clock framework
to avoid the additional confusion which they cause, and update all
ARM machine types except for OMAP.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 18:41:37 +00:00
Dmitry Torokhov
9d6c25029d Input: maceps2 - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:25:53 -05:00
Dmitry Torokhov
26421c7acc Input: q40kbd - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:25:42 -05:00
Dmitry Torokhov
916d83cfe5 Input: ct82c710 - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:25:30 -05:00
Dmitry Torokhov
87fd6318a6 Input: i8042 - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:25:11 -05:00
Adrian Bunk
0b57ee9e55 [SPARC]: introduce a SPARC Kconfig symbol
Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 23:09:54 -08:00
Dmitry Torokhov
4eb38ac062 Input: i8042 - disable MUX mode for Sharp MM20
Add yet another entry to the ever-growing list of boxes with
non-working MUX implementation.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:51:51 -05:00
Dmitry Torokhov
9e50afd0cb Input: make serio and gameport more swsusp friendly
kseriod and kgameportd used to process all pending events before
checking for freeze condition. This may cause swsusp to time out
while stopping tasks when resuming. Switch to process events one
by one to check freeze status more often.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-11-20 00:56:43 -05:00
Russell King
3ae5eaec1d [DRIVER MODEL] Convert platform drivers to use struct platform_driver
This allows us to eliminate the casts in the drivers, and eventually
remove the use of the device_driver function pointer methods for
platform device drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 22:32:44 +00:00
Linus Torvalds
4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00
Tim Schmielau
4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
Russell King
d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Linus Torvalds
84860bf064 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 2005-10-28 13:09:47 -07:00
Russell King
9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Matthew Wilcox
6ab0f5cd36 [PARISC] Update parisc specific input code from parisc tree
Update drivers to new input layer changes.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Reorder code in gscps2_interrupt() and only enable ports when opened.
This fixes issues with hangs booting an SMP kernel on my C360.
Previously serio_interrupt() could be called before the lock in
struct serio was initialised.

Signed-off-by: Richard Hirst <rhirst@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:58:51 -04:00
Matthew Wilcox
53f01bba49 [PARISC] Convert parisc_device to use struct resource for hpa
Convert pa_dev->hpa from an unsigned long to a struct resource.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Fix up users of ->hpa to use ->hpa.start instead.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:36:40 -04:00
Matthew Wilcox
bdad1f836a [PARISC] Change the driver names so /sys/bus/parisc/drivers/ looks better
Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver
names.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:36:23 -04:00
Dmitry Torokhov
d39969deee Input: i8042 - use kzalloc instead of kcalloc
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-10 12:04:42 -05:00
Dmitry Torokhov
d344c5e085 Manual merge with Linus 2005-09-09 20:14:47 -05:00
Pekka Enberg
a97e148a8b [PATCH] input: convert kcalloc to kzalloc
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:45 -07:00
Dmitry Torokhov
7545c24c6a Input: i8042 - add Lifebook E4010 to MUX blacklist
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-04 01:42:10 -05:00
Dmitry Torokhov
945ef0d428 Input: i8042 - add i8042.nokbd module option to allow supressing
creation of keyboard port.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-04 01:42:00 -05:00
Dmitry Torokhov
c3d31e7f9a Input: i8042 - fix IRQ printing when either KBD or AUX port
is absent from ACPI/PNP tables.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-04 01:41:51 -05:00
Dmitry Torokhov
8d5987a6e1 Input: make i8042_platform_init return 'real' error code
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-04 01:41:38 -05:00
Dmitry Torokhov
0854e52d86 Input: i8042 - clean up initialization code; abort if we
can't create all ports.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-04 01:41:27 -05:00
Dmitry Torokhov
463a4f76a7 Input: i8042 - don't use negation to mark AUX data
Currently i8042_command() negates data coming from the AUX port
of keyboard controller; this is not a very reliable indicator.
Change i8042_command() to fail if response to I8042_CMD_AUX_LOOP
is not coming from AUX channel and get rid of negation.

Based on patch by Vojtech Pavlik.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-07-15 01:51:56 -05:00
Vojtech Pavlik
20f07944af Input: i8042 - add Fujitsu T3010 to NOMUX blacklist.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-07-11 01:06:28 -05:00
Dmitry Torokhov
865190cdbb Input: i8042 - add Alienware Sentia to NOMUX blacklist.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-07-11 01:06:06 -05:00
Neil Brown
bef5a66fd7 Input: serio_raw - fix Kconfig help
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-07-11 01:05:47 -05:00
Dmitry Torokhov
dc1e97b5ea Input: serio_raw - link serio_raw misc device to corresponding
serio port in sysfs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-07-11 01:02:16 -05:00
Dmitry Torokhov
ae87dff7ca Input: serio - add modalias attribute and environment variable to
simplify hotplug scripts.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-30 00:48:34 -05:00
Linus Torvalds
3c803e8e2f Commit the manual part of the input layer merge.
git did actually warn me about the fact that I hadn't actually done an
"update-cache" on these two files, but the warning was at the bottom of
a list of all the files that _did_ change in the merge, so I never
noticed.  My bad.
2005-06-27 17:49:45 -07:00
Linus Torvalds
3e0777b8fa Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input.git manually
Some manual fixups required due to clashes with the PF_FREEZE cleanups.
2005-06-27 14:47:31 -07:00
Linus Torvalds
2031d0f586 Merge Christoph's freeze cleanup patch 2005-06-25 17:16:53 -07:00
Christoph Lameter
3e1d1d28d9 [PATCH] Cleanup patch for process freezing
1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:10:13 -07:00
Paul E. McKenney
b2b1866006 [PATCH] RCU: clean up a few remaining synchronize_kernel() calls
2.6.12-rc6-mm1 has a few remaining synchronize_kernel()s, some (but not
all) in comments.  This patch changes these synchronize_kernel() calls (and
comments) to synchronize_rcu() or synchronize_sched() as follows:

- arch/x86_64/kernel/mce.c mce_read(): change to synchronize_sched() to
  handle races with machine-check exceptions (synchronize_rcu() would not cut
  it given RCU implementations intended for hardcore realtime use.

- drivers/input/serio/i8042.c i8042_stop(): change to synchronize_sched() to
  handle races with i8042_interrupt() interrupt handler.  Again,
  synchronize_rcu() would not cut it given RCU implementations intended for
  hardcore realtime use.

- include/*/kdebug.h comments: change to synchronize_sched() to handle races
  with NMIs.  As before, synchronize_rcu() would not cut it...

- include/linux/list.h comment: change to synchronize_rcu(), since this
  comment is for list_del_rcu().

- security/keys/key.c unregister_key_type(): change to synchronize_rcu(),
  since this is interacting with RCU read side.

- security/keys/process_keys.c install_session_keyring(): change to
  synchronize_rcu(), since this is interacting with RCU read side.

Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:38 -07:00
Alexey Dobriyan
64ccd715d3 [PATCH] Convert users to tty_unregister_ldisc()
tty_register_ldisc(N_FOO, NULL) => tty_unregister_ldisc(N_FOO)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:36 -07:00
Yani Ioannou
e404e274f6 [PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:34 -07:00
Dmitry Torokhov
dbf4ccd604 Input: psmouse - export protocol as a sysfs per-device attribute
to allow easy switching at run-time.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-01 02:40:01 -05:00
Dmitry Torokhov
905ab9d136 Input: cleanup ps2_command() timeout handling in libps2.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-01 02:39:53 -05:00
Dmitry Torokhov
c611763d04 Input: add ps2_drain() to libps2 to allow reading and discarding
given number of bytes from device. Change ps2_command to
       allow using 0 as command ID and actually pass it to the
       device instead of working as a drain.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-01 02:39:51 -05:00
Dmitry Torokhov
04df1925fc Input: pmouse - introduce proper locking so state-changing
operations do not iterfere with each other.
       Also make sure that serio core takes serio->drv_sem
       not only for connect/disconnect but for reconnect
       too.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-01 02:39:44 -05:00
Dmitry Torokhov
a9180ab2e2 Input: switch serio core to using kthread API instead of using
daemonize() and signals. This way kseriod will never be
       accidentially killed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-01 02:38:12 -05:00
Dmitry Torokhov
b4ff99b60c Input: yet another model that does not play nicely when i8042 is
put in MUX mode - Fujitsu Lifebook S6230

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-28 02:12:10 -05:00
Dmitry Torokhov
59311de3fb Input: automatically disable MUX mode on Toshiba Satellite P10
because it interferes with ALPS touchpad detection and
       causes horrible death on reboot. Since P10 does not have
       external PS/2 ports MUX mode does not have any advantages
       over legacy mode anyway.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-28 02:12:05 -05:00
Kurt Garloff
74af42bb72 Input: Avoid double unregistering of i8042 PnP driver. This can happen
when no i8042 controller (not PnP, not legacy) is present.

From: Kurt Garloff <garloff@suse.de>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-28 02:11:38 -05:00
Dmitry Torokhov
5a72afc03c Input: Tone down the severity of a printk() in i386/ia64 arch code
for i386, it's printed on many machines and usually is not
       a cause for worry.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
2005-05-28 02:11:32 -05:00
Vojtech Pavlik
2673c836ab Input: Only write the CTR in i8042 resume function. Reading it is
wrong, since it may (will) contain nonsensical data.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-28 02:11:27 -05:00
Vojtech Pavlik
be15692310 Input: Remove (now) unused variable in i8042.c
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-28 02:11:19 -05:00
Vojtech Pavlik
39fa58007a Input: Add a missing KERN_INFO message designation, fix behavior
when only a keyboard part of the controller is detected.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-28 02:11:16 -05:00
Dmitry Torokhov
baae956100 [PATCH] serio 'id' attributes
move serio port's id attributes into separate subdirectory:
       ..devices/serioX/id_type  -> ..devices/serioX/id/type
       ..devices/serioX/id_proto -> ..devices/serioX/id/proto

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:10 -07:00
Dmitry Torokhov
1ff2c873ca [PATCH] serport oops fix
serport - avoid calling serio_interrupt or serio_write_wakeup on unregistered
port.  Also fix memory leak which could happen if serport was left unused by
moving serio allocation down to serport_ldisc_read.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:10 -07:00
Dmitry Torokhov
0c3f2be423 [PATCH] serio resume fix
serio - do not attempt to immediately disconnect port if resume failed, let
kseriod take care of it.  Otherwise we may attempt to unregister associated
input devices which will generate hotplug events which are not handled well
during swsusp.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:09 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00