mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 00:35:19 +07:00
620f774f46
608 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Lorenzo Pieralisi
|
7b309aef04 |
PCI: Remove __weak tag from pci_remap_iospace()
pci_remap_iospace() is marked as a weak symbol even though no architecture is currently overriding it; given that its implementation internals have already code paths that are arch specific (ie PCI_IOBASE and ioremap_page_range() attributes) there is no need to leave the weak symbol in the kernel since the same functionality can be achieved by customizing per-arch the corresponding functionality. Remove the __weak symbol from pci_remap_iospace(). Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Yongji Xie
|
e3adec72a3 |
PCI: Don't resize resources when realigning all devices in system
The "pci=resource_alignment" argument aligns BARs of designated devices by artificially increasing their size. Increasing the size increases the alignment and prevents other resources from being assigned in the same alignment region, e.g., in the same page, but it can break drivers that use the BAR size to locate things, e.g., ilo_map_device() does this: off = pci_resource_len(pdev, bar) - 0x2000; The new pcibios_default_alignment() interface allows an arch to request that *all* BARs in the system be aligned to a larger size. In this case, we don't need to artificially increase the resource size because we know every BAR of every device will be realigned, so nothing will share the same alignment region. Use IORESOURCE_STARTALIGN to request realignment of PCI BARs when we know we're realigning all BARs in the system. [bhelgaas: comment, changelog] Signed-off-by: Yongji Xie <elohimes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Bjorn Helgaas
|
0dde1c08d1 |
PCI: Don't reassign resources that are already aligned
The "pci=resource_alignment=" kernel argument designates devices for which we want alignment greater than is required by the PCI specs. Previously we set IORESOURCE_UNSET for every MEM resource of those devices, even if the resource was *already* sufficiently aligned. If a resource is already sufficiently aligned, leave it alone and don't try to reassign it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Bjorn Helgaas
|
81a5e70e0d |
PCI: Factor pci_reassigndev_resource_alignment()
Pull the BAR size adjustment out into a new function, pci_request_resource_alignment(), and add a comment about how and why we increase the resource size and alignment. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Yongji Xie
|
0a701aa637 |
PCI: Add pcibios_default_alignment() for arch-specific alignment control
When VFIO passes through a PCI device to a guest, it does not allow the guest to mmap BARs that are smaller than PAGE_SIZE unless it can reserve the rest of the page (see vfio_pci_probe_mmaps()). This is because a page might contain several small BARs for unrelated devices and a guest should not be able to access all of them. VFIO emulates guest accesses to non-mappable BARs, which is functional but slow. On systems with large page sizes, e.g., PowerNV with 64K pages, BARs are more likely to share a page and performance is more likely to be a problem. Add a weak function to set default alignment for all PCI devices. An arch can override it to force the PCI core to place memory BARs on their own pages. Signed-off-by: Yongji Xie <elohimes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Lukas Wunner
|
ea00353f36 |
PCI: Freeze PME scan before suspending devices
Laurent Pinchart reported that the Renesas R-Car H2 Lager board (r8a7790)
crashes during suspend tests. Geert Uytterhoeven managed to reproduce the
issue on an M2-W Koelsch board (r8a7791):
It occurs when the PME scan runs, once per second. During PME scan, the
PCI host bridge (rcar-pci) registers are accessed while its module clock
has already been disabled, leading to the crash.
One reproducer is to configure s2ram to use "s2idle" instead of "deep"
suspend:
# echo 0 > /sys/module/printk/parameters/console_suspend
# echo s2idle > /sys/power/mem_sleep
# echo mem > /sys/power/state
Another reproducer is to write either "platform" or "processors" to
/sys/power/pm_test. It does not (or is less likely) to happen during full
system suspend ("core" or "none") because system suspend also disables
timers, and thus the workqueue handling PME scans no longer runs. Geert
believes the issue may still happen in the small window between disabling
module clocks and disabling timers:
# echo 0 > /sys/module/printk/parameters/console_suspend
# echo platform > /sys/power/pm_test # Or "processors"
# echo mem > /sys/power/state
(Make sure CONFIG_PCI_RCAR_GEN2 and CONFIG_USB_OHCI_HCD_PCI are enabled.)
Rafael Wysocki agrees that PME scans should be suspended before the host
bridge registers become inaccessible. To that end, queue the task on a
workqueue that gets frozen before devices suspend.
Rafael notes however that as a result, some wakeup events may be missed if
they are delivered via PME from a device without working IRQ (which hence
must be polled) and occur after the workqueue has been frozen. If that
turns out to be an issue in practice, it may be possible to solve it by
calling pci_pme_list_scan() once directly from one of the host bridge's
pm_ops callbacks.
Stacktrace for posterity:
PM: Syncing filesystems ... [ 38.566237] done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... [ 38.579813] (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
PM: suspend of devices complete after 152.456 msecs
PM: late suspend of devices complete after 2.809 msecs
PM: noirq suspend of devices complete after 29.863 msecs
suspend debug: Waiting for 5 second(s).
Unhandled fault: asynchronous external abort (0x1211) at 0x00000000
pgd = c0003000
[00000000] *pgd=80000040004003, *pmd=00000000
Internal error: : 1211 [#1] SMP ARM
Modules linked in:
CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted
4.9.0-rc1-koelsch-00011-g68db9bc814362e7f #3383
Hardware name: Generic R8A7791 (Flattened Device Tree)
Workqueue: events pci_pme_list_scan
task: eb56e140 task.stack: eb58e000
PC is at pci_generic_config_read+0x64/0x6c
LR is at rcar_pci_cfg_base+0x64/0x84
pc : [<c041d7b4>] lr : [<c04309a0>] psr: 600d0093
sp : eb58fe98 ip : c041d750 fp : 00000008
r10: c0e2283c r9 : 00000000 r8 : 600d0013
r7 : 00000008 r6 : eb58fed6 r5 : 00000002 r4 : eb58feb4
r3 : 00000000 r2 : 00000044 r1 : 00000008 r0 : 00000000
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5387d Table: 6a9f6c80 DAC: 55555555
Process kworker/1:1 (pid: 20, stack limit = 0xeb58e210)
Stack: (0xeb58fe98 to 0xeb590000)
fe80: 00000002 00000044
fea0: eb6f5800 c041d9b0 eb58feb4 00000008 00000044 00000000 eb78a000 eb78a000
fec0: 00000044 00000000 eb9aff00 c0424bf0 eb78a000 00000000 eb78a000 c0e22830
fee0: ea8a6fc0 c0424c5c eaae79c0 c0424ce0 eb55f380 c0e22838 eb9a9800 c0235fbc
ff00: eb55f380 c0e22838 eb55f380 eb9a9800 eb9a9800 eb58e000 eb9a9824 c0e02100
ff20: eb55f398 c02366c4 eb56e140 eb5631c0 00000000 eb55f380 c023641c 00000000
ff40: 00000000 00000000 00000000 c023a928 cd105598 00000000 40506a34 eb55f380
ff60: 00000000 00000000 dead4ead ffffffff ffffffff eb58ff74 eb58ff74 00000000
ff80: 00000000 dead4ead ffffffff ffffffff eb58ff90 eb58ff90 eb58ffac eb5631c0
ffa0: c023a844 00000000 00000000 c0206d68 00000000 00000000 00000000 00000000
ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 3a81336c 10ccd1dd
[<c041d7b4>] (pci_generic_config_read) from [<c041d9b0>]
(pci_bus_read_config_word+0x58/0x80)
[<c041d9b0>] (pci_bus_read_config_word) from [<c0424bf0>]
(pci_check_pme_status+0x34/0x78)
[<c0424bf0>] (pci_check_pme_status) from [<c0424c5c>] (pci_pme_wakeup+0x28/0x54)
[<c0424c5c>] (pci_pme_wakeup) from [<c0424ce0>] (pci_pme_list_scan+0x58/0xb4)
[<c0424ce0>] (pci_pme_list_scan) from [<c0235fbc>]
(process_one_work+0x1bc/0x308)
[<c0235fbc>] (process_one_work) from [<c02366c4>] (worker_thread+0x2a8/0x3e0)
[<c02366c4>] (worker_thread) from [<c023a928>] (kthread+0xe4/0xfc)
[<c023a928>] (kthread) from [<c0206d68>] (ret_from_fork+0x14/0x2c)
Code: ea000000 e5903000 f57ff04f e3a00000 (e5843000)
---[ end trace 667d43ba3aa9e589 ]---
Fixes:
|
||
|
Yongji Xie
|
ea629d873f |
PCI: Ignore requested alignment for IOV BARs
We would call pci_reassigndev_resource_alignment() before pci_init_capabilities(). So the requested alignment would never work for IOV BARs. Furthermore, it's meaningless to request additional alignment for IOV BARs, the IOV BAR alignment is only determined by the VF BAR size. Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> |
||
|
Sasha Neftin
|
f65fd1aa4f |
PCI: Avoid FLR for Intel 82579 NICs
Per Intel Specification Update 335553-002 (see link below), some 82579 network adapters advertise a Function Level Reset (FLR) capability, but they can hang when an FLR is triggered. To reproduce the problem, attach the device to a VM, then detach and try to attach again. Add a quirk to prevent the use of FLR on these devices. [bhelgaas: changelog, comments] Link: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/82579lm-82579v-gigabit-network-connection-spec-update.pdf Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Keith Busch
|
fe2bd75b22 |
PCI: Short-circuit pci_device_is_present() for disconnected devices
If the PCI device is disconnected, return false immediately from pci_device_is_present(). pci_device_is_present() uses the bus accessors, so the early return in the device accessors doesn't help here. Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Wei Zhang <wzhang@fb.com> |
||
|
Adrian Hunter
|
50b2b540c0 |
PCI/PM: Don't sleep at all when d3_delay or d3cold_delay is zero
msleep() still sleeps 1 jiffy even when told to sleep for zero milliseconds. That can end up being 1-2 milliseconds or more. In the cases of d3_delay and d3cold_delay, that unnecessarily increases suspend and/or resume latencies. Do not sleep at all for the respective cases if d3_delay is zero or d3cold_delay is zero. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Bjorn Helgaas
|
d98e092907 |
Revert "PCI: pciehp: Add runtime PM support for PCIe hotplug ports"
This reverts commit |
||
|
Bjorn Helgaas
|
2583157141 |
Merge branch 'pci/virtualization' into next
* pci/virtualization: PCI: Add comments about ROM BAR updating PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE PCI: Remove pci_resource_bar() and pci_iov_resource_bar() PCI: Don't update VF BARs while VF memory space is enabled PCI: Separate VF BAR updates from standard BAR updates PCI: Update BARs using property bits appropriate for type PCI: Ignore BAR updates on virtual functions PCI: Do any VF BAR updates before enabling the BARs PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+ PCI: Convert Mellanox broken INTx quirks to be for listed devices only PCI: Convert broken INTx masking quirks from HEADER to FINAL net/mlx4_core: Use device ID defines PCI: Add Mellanox device IDs |
||
|
Bjorn Helgaas
|
286c2378aa |
PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
pci_std_update_resource() only deals with standard BARs, so we don't have to worry about the complications of VF BARs in an SR-IOV capability. Compute the BAR address inline and remove pci_resource_bar(). That makes pci_iov_resource_bar() unused, so remove that as well. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> |
||
|
Bjorn Helgaas
|
63880b230a |
PCI: Ignore BAR updates on virtual functions
VF BARs are read-only zero, so updating VF BARs will not have any effect.
See the SR-IOV spec r1.1, sec 3.4.1.11.
We already ignore these updates because of
|
||
|
Lukas Wunner
|
68db9bc814 |
PCI: pciehp: Add runtime PM support for PCIe hotplug ports
Linux 4.8 added support for runtime suspending PCIe ports to D3hot with
commit
|
||
|
Lukas Wunner
|
718a0609ae |
PCI: Unfold conditions to block runtime PM on PCIe ports
The conditions to block D3 on parent ports are currently condensed into a single expression in pci_dev_check_d3cold(). Upcoming commits will add further conditions for hotplug ports, making this expression fairly large and impenetrable. Unfold the conditions to maintain readability when they are amended. No functional change intended. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com> CC: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Lukas Wunner
|
97a90aee5d |
PCI: Consolidate conditions to allow runtime PM on PCIe ports
The conditions to allow runtime PM on PCIe ports are currently spread across two different files: The condition relating to hotplug ports is located in portdrv_pci.c whereas all other conditions are located in pci.c. Consolidate all conditions in a single place in pci.c, thus making it easier to follow the logic and amend conditions down the road. Note that the condition relating to hotplug ports is inserted *before* the condition relating to the "pcie_port_pm=force" command line option, so runtime PM is not afforded to hotplug ports even if this option is given. That's exactly how the code behaved up until now. If this is not desired, the ordering of the conditions can simply be reversed. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Lukas Wunner
|
c6a6330706 |
PCI: Activate runtime PM on a PCIe port only if it can suspend
Currently pcie_portdrv_probe() activates runtime PM on a PCIe port even if it will never actually suspend because the BIOS is too old or the "pcie_port_pm=off" option was specified on the kernel command line. A few CPU cycles can be saved by not activating runtime PM at all in these cases, because rpm_idle() and rpm_suspend() will bail out right at the beginning when calling rpm_check_suspend_allowed(), instead of carrying out various locking and assignments, invoking rpm_callback(), getting back -EBUSY and rolling everything back. The conditions checked in pci_bridge_d3_possible() are all static, they never change during uptime of the system, hence it's safe to call this to determine if runtime PM should be activated. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Lukas Wunner
|
e8559b7100 |
PCI: Speed up algorithm in pci_bridge_d3_update()
After a device has been added, removed or had its D3cold attributes
changed, we recheck whether its parent bridge may runtime suspend to D3hot
with pci_bridge_d3_update().
The most naive algorithm would be to iterate over the bridge's children and
check if any of them are blocking D3.
The function already tries to be a bit smarter than that by first checking
the device that was changed. If this device already blocks D3 on the
bridge, then walking over all the other children can be skipped. A
drawback of this approach is that if the device is *not* blocking D3, it
will be checked a second time by pci_walk_bus(). But that's cheap and is
outweighed by the performance gain of potentially skipping pci_walk_bus()
altogether.
The algorithm can be optimized further by taking into account if D3 is
currently allowed for the bridge, as shown in the following truth table:
(a) remove && bridge_d3: D3 is currently allowed for the bridge and
removing one of its children won't change
that. No action necessary.
(b) remove && !bridge_d3: D3 may now be allowed for the bridge if the
removed child was the only one blocking it.
Check all its siblings to verify that.
(c) !remove && bridge_d3: D3 may now be disallowed but this can only
be caused by the added/changed child, not
any of its siblings. Check only that single
device.
(d) !remove && !bridge_d3: D3 may now be allowed for the bridge if the
changed child was the only one blocking it.
Check all its siblings to verify that.
By checking beforehand if the changed child
is blocking D3, we may be able to skip
checking its siblings.
Currently we do not special-case option (a) and in case of option (c) we
gratuitously call pci_walk_bus(). Speed up the algorithm by adding these
optimizations. Reword the comments a bit in an attempt to improve clarity.
No functional change intended.
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Lukas Wunner
|
1ed276a7b9 |
PCI: Autosense device removal in pci_bridge_d3_update()
The algorithm to update the flag indicating whether a bridge may go to D3 makes a few optimizations based on whether the update was caused by the removal of a device on the one hand, versus the addition of a device or the change of its D3cold flags on the other hand. The information whether the update pertains to a removal is currently passed in by the caller, but the function may as well determine that itself by examining the device in question, thereby allowing for a considerable simplification and reduction of the code. Out of several options to determine removal, I've chosen the function device_is_registered() because it's cheap: It merely returns the dev->kobj.state_in_sysfs flag. That flag is set through device_add() when the root bus is scanned and cleared through device_remove(). The call to pci_bridge_d3_update() happens after each of these calls, respectively, so the ordering is correct. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Lukas Wunner
|
738a7edbfc |
PCI: Don't acquire ref on parent in pci_bridge_d3_update()
This function is always called with an existing pci_dev struct, which holds a reference on the pci_bus struct it resides on, which in turn holds a reference on pci_bus->bridge, which is the pci_dev's parent. Hence there's no need to acquire an additional ref on the parent. More specifically, the pci_dev exists until pci_destroy_dev() drops the final reference on it, so all calls to pci_bridge_d3_update() must be finished before that. It is arguably the caller's responsibility to ensure that it doesn't call pci_bridge_d3_update() with a pci_dev that might suddenly disappear, but in any case the existing callers are all safe: - The call in pci_destroy_dev() happens before the call to put_device(). - The call in pci_bus_add_device() is synchronized with pci_destroy_dev() using pci_lock_rescan_remove(). - The calls to pci_d3cold_disable() from the xhci and nouveau drivers are safe because a ref on the pci_dev is held as long as it's bound to a driver. - The calls to pci_d3cold_enable() / pci_d3cold_disable() when modifying the sysfs "d3cold_allowed" entry are also safe because kernfs_drain() waits for existing sysfs users to finish before removing the entry, and pci_destroy_dev() is called way after that. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Alan Stern
|
6496ebd7ed |
PCI: Check for PME in targeted sleep state
One some systems, the firmware does not allow certain PCI devices to be put in deep D-states. This can cause problems for wakeup signalling, if the device does not support PME# in the deepest allowed suspend state. For example, Pierre reports that on his system, ACPI does not permit his xHCI host controller to go into D3 during runtime suspend -- but D3 is the only state in which the controller can generate PME# signals. As a result, the controller goes into runtime suspend but never wakes up, so it doesn't work properly. USB devices plugged into the controller are never detected. If the device relies on PME# for wakeup signals but is not capable of generating PME# in the target state, the PCI core should accurately report that it cannot do wakeup from runtime suspend. This patch modifies the pci_dev_run_wake() routine to add this check. Reported-by: Pierre de Villemereuil <flyos@mailoo.org> Tested-by: Pierre de Villemereuil <flyos@mailoo.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org CC: Lukas Wunner <lukas@wunner.de> |
||
|
Linus Torvalds
|
e6e3d8f8f4 |
PCI changes for the v4.9 merge window:
Enumeration
microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)
Resource management
Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
Ignore requested alignment for VF BARs (Yongji Xie)
PCI device hotplug
Make core explicitly non-modular (Paul Gortmaker)
PCIe native device hotplug
Rename pcie_isr() locals for clarity (Bjorn Helgaas)
Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
Remove unnecessary guard (Bjorn Helgaas)
Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
Clear attention LED on device add (Keith Busch)
Allow exclusive userspace control of indicators (Keith Busch)
Process all hotplug events before looking for new ones (Mayurkumar Patel)
Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
Make explicitly non-modular (Paul Gortmaker)
Power management
Afford direct-complete to devices with non-standard PM (Lukas Wunner)
Query platform firmware for device power state (Lukas Wunner)
Recognize D3cold in pci_update_current_state() (Lukas Wunner)
Avoid unnecessary resume after direct-complete (Lukas Wunner)
Make explicitly non-modular (Paul Gortmaker)
Virtualization
Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)
MSI
Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)
AER
Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
Fix aer_probe() kernel-doc comment (Cao jin)
Add bus flag to skip source ID matching (Jon Derrick)
Avoid memory allocation in interrupt handling path (Jon Derrick)
Cache capability position (Keith Busch)
Make explicitly non-modular (Paul Gortmaker)
Remove duplicate AER severity translation (Tyler Baicar)
Send correct severity to calculate AER severity (Tyler Baicar)
Precision Time Measurement
Add Precision Time Measurement (PTM) support (Jonathan Yong)
Add PTM clock granularity information (Bjorn Helgaas)
Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)
Generic host bridge driver
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Make explicitly non-modular (Paul Gortmaker)
Altera host bridge driver
Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
Poll for link training status after retraining the link (Ley Foon Tan)
Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
Make MSI explicitly non-modular (Paul Gortmaker)
Make explicitly non-modular (Paul Gortmaker)
Relax device number checking to allow SR-IOV (Po Liu)
ARM Versatile host bridge driver
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Axis ARTPEC-6 host bridge driver
Drop __init from artpec6_add_pcie_port() (Niklas Cassel)
Freescale i.MX6 host bridge driver
Make explicitly non-modular (Paul Gortmaker)
Intel VMD host bridge driver
Add quirk for AER to ignore source ID (Jon Derrick)
Allocate IRQ lists with correct MSI-X count (Jon Derrick)
Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
Eliminate vmd_vector member from list type (Jon Derrick)
Eliminate index member from IRQ list (Jon Derrick)
Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
Request userspace control of PCIe hotplug indicators (Keith Busch)
Move VMD driver to drivers/pci/host (Keith Busch)
Marvell Aardvark host bridge driver
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)
Microsoft Hyper-V host bridge driver
Use zero-length array in struct pci_packet (Dexuan Cui)
Use pci_function_description[0] in struct definitions (Dexuan Cui)
Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
Handle hv_pci_generic_compl() error case (Dexuan Cui)
Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)
NVIDIA Tegra host bridge driver
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Remove redundant _data suffix (Thierry Reding)
Use of_device_get_match_data() (Thierry Reding)
Qualcomm host bridge driver
Make explicitly non-modular (Paul Gortmaker)
Renesas R-Car host bridge driver
Consolidate register space lookup and ioremap (Bjorn Helgaas)
Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
Add multi-MSI support (Grigory Kletsko)
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Fix some checkpatch warnings (Sergei Shtylyov)
Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)
Rockchip host bridge driver
Add DT bindings for Rockchip PCIe controller (Shawn Lin)
Add Rockchip PCIe controller support (Shawn Lin)
Improve the deassert sequence of four reset pins (Shawn Lin)
Fix wrong transmitted FTS count (Shawn Lin)
Increase the Max Credit update interval (Rajat Jain)
Samsung Exynos host bridge driver
Make explicitly non-modular (Paul Gortmaker)
ST Microelectronics SPEAr13xx host bridge driver
Make explicitly non-modular (Paul Gortmaker)
Synopsys DesignWare host bridge driver
Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
Check LTSSM training bit before deciding link is up (Jisheng Zhang)
Move link wait definitions to .c file (Joao Pinto)
Wait for iATU enable (Joao Pinto)
Add iATU Unroll feature (Joao Pinto)
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Make explicitly non-modular (Paul Gortmaker)
Relax device number checking to allow SR-IOV (Po Liu)
Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
Remove redundant platform_get_resource() return value check (Wei Yongjun)
TI DRA7xx host bridge driver
Make explicitly non-modular (Paul Gortmaker)
TI Keystone host bridge driver
Propagate request_irq() failure (Wei Yongjun)
Xilinx AXI host bridge driver
Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
Clear correct MSI set bit (Bharat Kumar Gogada)
Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
Make explicitly non-modular (Paul Gortmaker)
Relax device number checking to allow SR-IOV (Po Liu)
Xilinx NWL host bridge driver
Expand error logging (Bharat Kumar Gogada)
Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
Make explicitly non-modular (Paul Gortmaker)
Miscellaneous
Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
portdrv: Make explicitly non-modular (Paul Gortmaker)
Make DPC explicitly non-modular (Paul Gortmaker)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0Aq4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Summary of PCI changes for the v4.9 merge window:
Enumeration:
- microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)
Resource management:
- Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
- Ignore requested alignment for VF BARs (Yongji Xie)
PCI device hotplug:
- Make core explicitly non-modular (Paul Gortmaker)
PCIe native device hotplug:
- Rename pcie_isr() locals for clarity (Bjorn Helgaas)
- Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
- Remove unnecessary guard (Bjorn Helgaas)
- Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
- Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
- Clear attention LED on device add (Keith Busch)
- Allow exclusive userspace control of indicators (Keith Busch)
- Process all hotplug events before looking for new ones (Mayurkumar Patel)
- Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
- Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
- Make explicitly non-modular (Paul Gortmaker)
Power management:
- Afford direct-complete to devices with non-standard PM (Lukas Wunner)
- Query platform firmware for device power state (Lukas Wunner)
- Recognize D3cold in pci_update_current_state() (Lukas Wunner)
- Avoid unnecessary resume after direct-complete (Lukas Wunner)
- Make explicitly non-modular (Paul Gortmaker)
Virtualization:
- Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
- Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)
MSI:
- Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)
AER:
- Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
- Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
- Fix aer_probe() kernel-doc comment (Cao jin)
- Add bus flag to skip source ID matching (Jon Derrick)
- Avoid memory allocation in interrupt handling path (Jon Derrick)
- Cache capability position (Keith Busch)
- Make explicitly non-modular (Paul Gortmaker)
- Remove duplicate AER severity translation (Tyler Baicar)
- Send correct severity to calculate AER severity (Tyler Baicar)
Precision Time Measurement:
- Add Precision Time Measurement (PTM) support (Jonathan Yong)
- Add PTM clock granularity information (Bjorn Helgaas)
- Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)
Generic host bridge driver:
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Make explicitly non-modular (Paul Gortmaker)
Altera host bridge driver:
- Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
- Poll for link training status after retraining the link (Ley Foon Tan)
- Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
- Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
- Make MSI explicitly non-modular (Paul Gortmaker)
- Make explicitly non-modular (Paul Gortmaker)
- Relax device number checking to allow SR-IOV (Po Liu)
ARM Versatile host bridge driver:
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Axis ARTPEC-6 host bridge driver:
- Drop __init from artpec6_add_pcie_port() (Niklas Cassel)
Freescale i.MX6 host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
Intel VMD host bridge driver:
- Add quirk for AER to ignore source ID (Jon Derrick)
- Allocate IRQ lists with correct MSI-X count (Jon Derrick)
- Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
- Eliminate vmd_vector member from list type (Jon Derrick)
- Eliminate index member from IRQ list (Jon Derrick)
- Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
- Request userspace control of PCIe hotplug indicators (Keith Busch)
- Move VMD driver to drivers/pci/host (Keith Busch)
Marvell Aardvark host bridge driver:
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)
Microsoft Hyper-V host bridge driver:
- Use zero-length array in struct pci_packet (Dexuan Cui)
- Use pci_function_description[0] in struct definitions (Dexuan Cui)
- Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
- Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
- Handle hv_pci_generic_compl() error case (Dexuan Cui)
- Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)
NVIDIA Tegra host bridge driver:
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Remove redundant _data suffix (Thierry Reding)
- Use of_device_get_match_data() (Thierry Reding)
Qualcomm host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
Renesas R-Car host bridge driver:
- Consolidate register space lookup and ioremap (Bjorn Helgaas)
- Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
- Add multi-MSI support (Grigory Kletsko)
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Fix some checkpatch warnings (Sergei Shtylyov)
- Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)
Rockchip host bridge driver:
- Add DT bindings for Rockchip PCIe controller (Shawn Lin)
- Add Rockchip PCIe controller support (Shawn Lin)
- Improve the deassert sequence of four reset pins (Shawn Lin)
- Fix wrong transmitted FTS count (Shawn Lin)
- Increase the Max Credit update interval (Rajat Jain)
Samsung Exynos host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
ST Microelectronics SPEAr13xx host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
Synopsys DesignWare host bridge driver:
- Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
- Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
- Check LTSSM training bit before deciding link is up (Jisheng Zhang)
- Move link wait definitions to .c file (Joao Pinto)
- Wait for iATU enable (Joao Pinto)
- Add iATU Unroll feature (Joao Pinto)
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Make explicitly non-modular (Paul Gortmaker)
- Relax device number checking to allow SR-IOV (Po Liu)
- Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
- Remove redundant platform_get_resource() return value check (Wei Yongjun)
TI DRA7xx host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
TI Keystone host bridge driver:
- Propagate request_irq() failure (Wei Yongjun)
Xilinx AXI host bridge driver:
- Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
- Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
- Clear correct MSI set bit (Bharat Kumar Gogada)
- Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
- Make explicitly non-modular (Paul Gortmaker)
- Relax device number checking to allow SR-IOV (Po Liu)
Xilinx NWL host bridge driver:
- Expand error logging (Bharat Kumar Gogada)
- Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
- Make explicitly non-modular (Paul Gortmaker)
Miscellaneous:
- Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
- portdrv: Make explicitly non-modular (Paul Gortmaker)
- Make DPC explicitly non-modular (Paul Gortmaker)"
* tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits)
x86/PCI: VMD: Move VMD driver to drivers/pci/host
PCI: rockchip: Fix wrong transmitted FTS count
PCI: rockchip: Improve the deassert sequence of four reset pins
PCI: rockchip: Increase the Max Credit update interval
PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot
PCI/AER: Fix aer_probe() kernel-doc comment
PCI: Ignore requested alignment for VF BARs
PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
PCI: Avoid unnecessary resume after direct-complete
PCI: Recognize D3cold in pci_update_current_state()
PCI: Query platform firmware for device power state
PCI: Afford direct-complete to devices with non-standard PM
PCI/AER: Cache capability position
PCI/AER: Avoid memory allocation in interrupt handling path
x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
PCI: pciehp: Allow exclusive userspace control of indicators
ACPI / APEI: Send correct severity to calculate AER severity
PCI/AER: Remove duplicate AER severity translation
x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
x86/PCI: VMD: Eliminate index member from IRQ list
...
|
||
|
Bjorn Helgaas
|
e15194d2a7 |
Merge branch 'pci/resource' into next
* pci/resource: PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources |
||
|
Yongji Xie
|
62d9a78f32 |
PCI: Ignore requested alignment for VF BARs
Resource allocation for VFs is done via the VF BARx registers in the PF's SR-IOV Capability, and the BARs in the VFs themselves are read-only zeros (see SR-IOV spec r1.1, secs 3.3.14 and 3.4.1.11). Even though the actual VF BARs are read-only zeros, the VF dev->resource[] structs describe the space allocated for the VF (this is a piece of the space described by the VF BARx register in the PF's SR-IOV capability). It's meaningless to request additional alignment for a VF: the VF BAR alignment is completely determined by the alignment of the VF BARx in the PF and the size of the VF BAR. Ignore the user's alignment requests for VF devices. Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Yongji Xie
|
f0b99f70e9 |
PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
Users may request additional alignment of PCI resources, e.g., to align BARs on page boundaries so they can be shared with guests via VFIO. This of course may require reallocation if firmware has already assigned the BARs with smaller alignments. If the platform has requested PCI_PROBE_ONLY, we should never change any PCI BARs, so we can't provide any additional alignment. Also, if a BAR is marked as IORESOURCE_PCI_FIXED, e.g., for PCI Enhanced Allocation or if the firmware depends on the current BAR value, we can't change the alignment. In these cases, log a message and ignore the user's alignment requests. [bhelgaas: changelog, use goto to simplify PCI_PROBE_ONLY check] Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Lukas Wunner
|
a6a64026c0 |
PCI: Recognize D3cold in pci_update_current_state()
Whenever a device is resumed or its power state is changed using the platform, its new power state is read from the PM Control & Status Register and cached in pci_dev->current_state by calling pci_update_current_state(). If the device is in D3cold, reading from config space typically results in a fabricated "all ones" response. But if it's in D3hot, the two bits representing the power state in the PMCSR are *also* set to 1. Thus D3hot and D3cold are not discernible by just reading the PMCSR. To account for this, pci_update_current_state() uses two workarounds: - When transitioning to D3cold using pci_platform_power_transition(), the new power state is set blindly by pci_update_current_state(), i.e. without verifying that the device actually *is* in D3cold. This is achieved by setting the "state" argument to PCI_D3cold. The "state" argument was originally intended to convey the new state in case the device doesn't have the PM capability. It is *also* used to convey the device state if the PM capability is present and the new state is D3cold, but this was never explained in the kerneldoc. - Once the current_state is set to D3cold, further invocations of pci_update_current_state() will blindly assume that the device is still in D3cold and leave the current_state unmodified. To get out of this impasse, the current_state has to be set directly, typically by calling pci_raw_set_power_state() or pci_enable_device(). It would be desirable if pci_update_current_state() could reliably detect D3cold by itself. That would allow us to do away with these workarounds, and it would allow for a smarter, more energy conserving runtime resume strategy after system sleep: Currently devices which utilize direct_complete are mandatorily runtime resumed in their ->complete stage. This can be avoided if their power state after system sleep is the same as before, but it requires a mechanism to detect the power state reliably. We've just gained the ability to query the platform firmware for its opinion on the device's power state. On platforms conforming to ACPI 4.0 or newer, this allows recognition of D3cold. Pre-4.0 platforms lack _PR3 and therefore the deepest power state that will ever be reported is D3hot, even though the device may actually be in D3cold. To detect D3cold in those cases, accessibility of the vendor ID in config space is probed using pci_device_is_present(). This also works for devices which are not platform-power-manageable at all, but can be suspended to D3cold using a nonstandard mechanism (e.g. some hybrid graphics laptops or Thunderbolt on the Mac). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Lukas Wunner
|
cc7cc02bad |
PCI: Query platform firmware for device power state
Usually the most accurate way to determine a PCI device's power state is to read its PM Control & Status Register. There are two cases however when this is not an option: If the device doesn't have the PM capability at all, or if it is in D3cold (in which case its config space is inaccessible). In both cases, we can alternatively query the platform firmware for its opinion on the device's power state. To facilitate this, augment struct pci_platform_pm_ops with a ->get_power callback and implement it for acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far). It is used by a forthcoming commit to let pci_update_current_state() recognize D3cold. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Lukas Wunner
|
4132a577a0 |
PCI: Afford direct-complete to devices with non-standard PM
There are devices not power-manageable by the platform, but still able to runtime suspend to D3cold with a non-standard mechanism. One example is laptop hybrid graphics where the discrete GPU and its built-in HDA controller are power-managed either with a _DSM (AMD PowerXpress, Nvidia Optimus) or a separate gmux controller (MacBook Pro). Another example is Thunderbolt on Macs which is power-managed with custom ACPI methods. When putting the system to sleep, we currently handle such devices improperly by transitioning them from D3cold to D3hot (the default power state defined at the top of pci_target_state()). This wastes energy and prolongs the suspend sequence (powering up the Thunderbolt controller takes 2 seconds). Avoid that by assuming that a non-standard PM mechanism is at work if the device is not platform-power-manageable but currently in D3cold. If the device is wakeup enabled, we might still have to wake it up from D3cold if PME cannot be signaled from that power state. The check for devices without PM capability comes before the check for D3cold since such devices could in theory also be powered down by non-standard means and should then be afforded direct-complete as well. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mika Westerberg
|
afd29f9017 |
PCI: Add pci_find_resource()
Add a new helper function pci_find_resource() that can be used to find out whether a given resource (for example from a child device) is contained within given PCI device's standard resources. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
c8d0267efd |
PCI changes for the v4.8 merge window:
Enumeration
Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
Add parent device field to ECAM struct pci_config_window (Jayachandran C)
Add generic MCFG table handling (Tomasz Nowicki)
Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
Resource management
Add devm_request_pci_bus_resources() (Bjorn Helgaas)
Unify pci_resource_to_user() declarations (Bjorn Helgaas)
Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
Ignore write combining when mapping I/O port space (Bjorn Helgaas)
Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
Support I/O resources when parsing host bridge resources (Jayachandran C)
Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
PCI device hotplug
Allow additional bus numbers for hotplug bridges (Keith Busch)
Ignore interrupts during D3cold (Lukas Wunner)
Power management
Enforce type casting for pci_power_t (Andy Shevchenko)
Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
Put PCIe ports into D3 during suspend (Mika Westerberg)
Power on bridges before scanning new devices (Mika Westerberg)
Runtime resume bridge before rescan (Mika Westerberg)
Add runtime PM support for PCIe ports (Mika Westerberg)
Remove redundant check of pcie_set_clkpm (Shawn Lin)
Virtualization
Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
Add ACS quirk for Solarflare SFC9220 (Edward Cree)
MSI
Fix PCI_MSI dependencies (Arnd Bergmann)
Add pci_msix_desc_addr() helper (Christoph Hellwig)
Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
Error Handling
Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
Remove DPC tristate module option (Keith Busch)
Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
Generic host bridge driver
Select IRQ_DOMAIN (Arnd Bergmann)
Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
ACPI host bridge driver
Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
Altera host bridge driver
Check link status before retrain link (Ley Foon Tan)
Poll for link up status after retraining the link (Ley Foon Tan)
Axis ARTPEC-6 host bridge driver
Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
Intel VMD host bridge driver
Use lock save/restore in interrupt enable path (Jon Derrick)
Select device dma ops to override (Keith Busch)
Initialize list item in IRQ disable (Keith Busch)
Use x86_vector_domain as parent domain (Keith Busch)
Separate MSI and MSI-X vector sharing (Keith Busch)
Marvell Aardvark host bridge driver
Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
Add Aardvark PCI host controller driver (Thomas Petazzoni)
Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
Microsoft Hyper-V host bridge driver
Fix interrupt cleanup path (Cathy Avery)
Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
NVIDIA Tegra host bridge driver
Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
Use lower-case hex consistently for register definitions (Thierry Reding)
Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
Stop setting pcibios_min_mem (Thierry Reding)
Renesas R-Car host bridge driver
Drop gen2 dummy I/O port region (Bjorn Helgaas)
TI DRA7xx host bridge driver
Fix return value in case of error (Christophe JAILLET)
Xilinx AXI host bridge driver
Fix return value in case of error (Christophe JAILLET)
Miscellaneous
Make bus_attr_resource_alignment static (Ben Dooks)
Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
Make host bridge drivers explicitly non-modular (Paul Gortmaker)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NVxu
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Highlights:
- ARM64 support for ACPI host bridges
- new drivers for Axis ARTPEC-6 and Marvell Aardvark
- new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx
- pci_resource_to_user() cleanup (more to come)
Detailed summary:
Enumeration:
- Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
- Add parent device field to ECAM struct pci_config_window (Jayachandran C)
- Add generic MCFG table handling (Tomasz Nowicki)
- Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
- Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
Resource management:
- Add devm_request_pci_bus_resources() (Bjorn Helgaas)
- Unify pci_resource_to_user() declarations (Bjorn Helgaas)
- Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
- Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
- Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
- Ignore write combining when mapping I/O port space (Bjorn Helgaas)
- Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
- Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
- Support I/O resources when parsing host bridge resources (Jayachandran C)
- Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
- Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
- Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
- Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
- Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
- Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
- Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
- Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
PCI device hotplug:
- Allow additional bus numbers for hotplug bridges (Keith Busch)
- Ignore interrupts during D3cold (Lukas Wunner)
Power management:
- Enforce type casting for pci_power_t (Andy Shevchenko)
- Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
- Put PCIe ports into D3 during suspend (Mika Westerberg)
- Power on bridges before scanning new devices (Mika Westerberg)
- Runtime resume bridge before rescan (Mika Westerberg)
- Add runtime PM support for PCIe ports (Mika Westerberg)
- Remove redundant check of pcie_set_clkpm (Shawn Lin)
Virtualization:
- Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
- Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
- Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
- Add ACS quirk for Solarflare SFC9220 (Edward Cree)
MSI:
- Fix PCI_MSI dependencies (Arnd Bergmann)
- Add pci_msix_desc_addr() helper (Christoph Hellwig)
- Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
- Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
- Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
- Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
Error Handling:
- Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
- Remove DPC tristate module option (Keith Busch)
- Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
Generic host bridge driver:
- Select IRQ_DOMAIN (Arnd Bergmann)
- Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
ACPI host bridge driver:
- Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
- Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
- Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
- Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
Altera host bridge driver:
- Check link status before retrain link (Ley Foon Tan)
- Poll for link up status after retraining the link (Ley Foon Tan)
Axis ARTPEC-6 host bridge driver:
- Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
- Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
- Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
Intel VMD host bridge driver:
- Use lock save/restore in interrupt enable path (Jon Derrick)
- Select device dma ops to override (Keith Busch)
- Initialize list item in IRQ disable (Keith Busch)
- Use x86_vector_domain as parent domain (Keith Busch)
- Separate MSI and MSI-X vector sharing (Keith Busch)
Marvell Aardvark host bridge driver:
- Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
- Add Aardvark PCI host controller driver (Thomas Petazzoni)
- Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
Microsoft Hyper-V host bridge driver:
- Fix interrupt cleanup path (Cathy Avery)
- Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
- Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
NVIDIA Tegra host bridge driver:
- Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
- Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
- Use lower-case hex consistently for register definitions (Thierry Reding)
- Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
- Stop setting pcibios_min_mem (Thierry Reding)
Renesas R-Car host bridge driver:
- Drop gen2 dummy I/O port region (Bjorn Helgaas)
TI DRA7xx host bridge driver:
- Fix return value in case of error (Christophe JAILLET)
Xilinx AXI host bridge driver:
- Fix return value in case of error (Christophe JAILLET)
Miscellaneous:
- Make bus_attr_resource_alignment static (Ben Dooks)
- Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
- MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
- Make host bridge drivers explicitly non-modular (Paul Gortmaker)"
* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
PCI: xgene: Make explicitly non-modular
PCI: thunder-pem: Make explicitly non-modular
PCI: thunder-ecam: Make explicitly non-modular
PCI: tegra: Make explicitly non-modular
PCI: rcar-gen2: Make explicitly non-modular
PCI: rcar: Make explicitly non-modular
PCI: mvebu: Make explicitly non-modular
PCI: layerscape: Make explicitly non-modular
PCI: keystone: Make explicitly non-modular
PCI: hisi: Make explicitly non-modular
PCI: generic: Make explicitly non-modular
PCI: designware-plat: Make it explicitly non-modular
PCI: artpec6: Make explicitly non-modular
PCI: armada8k: Make explicitly non-modular
PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
PCI: Add ACS quirk for Solarflare SFC9220
arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
PCI: aardvark: Add Aardvark PCI host controller driver
dt-bindings: add DT binding for the Aardvark PCIe controller
PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
...
|
||
|
Bjorn Helgaas
|
3efc702378 |
Merge branch 'pci/resource' into next
* pci/resource: unicore32/PCI: Remove pci=firmware command line parameter handling ARM/PCI: Remove arch-specific pcibios_enable_device() ARM64/PCI: Remove arch-specific pcibios_enable_device() MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: Add generic pci_bus_claim_resources() alx: Use pci_(request|release)_mem_regions ethernet/intel: Use pci_(request|release)_mem_regions GenWQE: Use pci_(request|release)_mem_regions lpfc: Use pci_(request|release)_mem_regions NVMe: Use pci_(request|release)_mem_regions PCI: Add helpers to request/release memory and I/O regions PCI: Extending pci=resource_alignment to specify device/vendor IDs sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus() microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() PCI: Unify pci_resource_to_user() declarations microblaze/PCI: Remove useless __pci_mmap_set_pgprot() powerpc/pci: Remove __pci_mmap_set_pgprot() PCI: Ignore write combining when mapping I/O port space |
||
|
Bjorn Helgaas
|
a00c74c166 |
Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/pm' and 'pci/virtualization' into next
* pci/aspm: PCI/ASPM: Remove redundant check of pcie_set_clkpm * pci/dpc: PCI: Remove DPC tristate module option PCI: Bind DPC to Root Ports as well as Downstream Ports PCI: Fix whitespace in struct dpc_dev PCI: Convert Downstream Port Containment driver to use devm_* functions * pci/hotplug: PCI: Allow additional bus numbers for hotplug bridges * pci/misc: PCI: Include <asm/dma.h> for isa_dma_bridge_buggy PCI: Make bus_attr_resource_alignment static MAINTAINERS: Add file patterns for PCI device tree bindings PCI: Fix comment typo * pci/msi: PCI/MSI: irqchip: Fix PCI_MSI dependencies * pci/pm: PCI: pciehp: Ignore interrupts during D3cold PCI: Document connection between pci_power_t and hardware PM capability PCI: Add runtime PM support for PCIe ports ACPI / hotplug / PCI: Runtime resume bridge before rescan PCI: Power on bridges before scanning new devices PCI: Put PCIe ports into D3 during suspend PCI: Don't clear d3cold_allowed for PCIe ports PCI / PM: Enforce type casting for pci_power_t * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9220 PCI: Add DMA alias quirk for Adaptec 3805 PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset PCI: Add function 1 DMA alias quirk for Marvell 88SE9182 |
||
|
Keith Busch
|
e16b466059 |
PCI: Allow additional bus numbers for hotplug bridges
A user may hot add a switch requiring more than one bus to enumerate. This previously required a system reboot if BIOS did not sufficiently pad the bus resource, which they frequently don't do. Add a kernel parameter so a user can specify the minimum number of bus numbers to reserve for a hotplug bridge's subordinate buses so rebooting won't be necessary. The default is 1, which is equivalent to previous behavior. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Andy Shevchenko
|
6ec39cf5cd |
PCI / PM: check all fields in pci_set_platform_pm()
When assign new PCI platform PM operations check for all mandatory fields to prevent NULL pointer dereference. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ben Dooks
|
2a2aca316a |
PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
At least on arm, <asm/dma.h> does not get included when building drivers/pci/pci.o. This causes the following build warning which can be fixed by including <asm/dma.h>: drivers/pci/pci.c:37:5: warning: symbol 'isa_dma_bridge_buggy' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Koehrer Mathias (ETAS/ESW5)
|
644a544fd9 |
PCI: Extending pci=resource_alignment to specify device/vendor IDs
Some uio-based PCI drivers, e.g., uio_cif do not work if the assigned PCI memory resources are not page aligned. By using the kernel option "pci=resource_alignment" it is possible to force single PCI boards to use page alignment for their memory resources. However, this is fairly cumbersome if several of these boards are in use as the specification of the cards has to be done via PCI bus/slot/function number which might change, e.g., by adding another board. Extend the kernel option "pci=resource_alignment" to allow specification of relevant devices via PCI device/vendor (and subdevice/subvendor) IDs. The specification of the devices via device/vendor is indicated by a leading string "pci:" as argument to "pci=resource_alignment". The format of the specification is pci:<vendor>:<device>[:<subvendor>:<subdevice>] Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Mika Westerberg
|
9d26d3a8f1 |
PCI: Put PCIe ports into D3 during suspend
Currently the Linux PCI core does not touch power state of PCI bridges and
PCIe ports when system suspend is entered. Leaving them in D0 consumes
power unnecessarily and may prevent the CPU from entering deeper C-states.
With recent PCIe hardware we can power down the ports to save power given
that we take into account few restrictions:
- The PCIe port hardware is recent enough, starting from 2015.
- Devices connected to PCIe ports are effectively in D3cold once the port
is transitioned to D3 (the config space is not accessible anymore and
the link may be powered down).
- Devices behind the PCIe port need to be allowed to transition to D3cold
and back. There is a way both drivers and userspace can forbid this.
- If the device behind the PCIe port is capable of waking the system it
needs to be able to do so from D3cold.
This patch adds a new flag to struct pci_device called 'bridge_d3'. This
flag is set and cleared by the PCI core whenever there is a change in power
management state of any of the devices behind the PCIe port. When system
later on is suspended we only need to check this flag and if it is true
transition the port to D3 otherwise we leave it in D0.
Also provide override mechanism via command line parameter
"pcie_port_pm=[off|force]" that can be used to disable or enable the
feature regardless of the BIOS manufacturing date.
Tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Ben Dooks
|
21751a9a4e |
PCI: Make bus_attr_resource_alignment static
The symbol bus_attr_resource_alignment is not exported or declared elsewhere, so make it static to fix the following warning: drivers/pci/pci.c:4900:1: warning: symbol 'bus_attr_resource_alignment' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Tomasz Nowicki
|
2ab51ddeca |
ARM64: PCI: Add acpi_pci_bus_find_domain_nr()
Extend pci_bus_find_domain_nr() so it can find the domain from either: - ACPI, via the new acpi_pci_bus_find_domain_nr() interface, or - DT, via of_pci_bus_find_domain_nr() Note that this is only used for CONFIG_PCI_DOMAINS_GENERIC=y, so it does not affect x86 or ia64. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Tomasz Nowicki
|
1a4f93f711 |
PCI: Factor DT-specific pci_bus_find_domain_nr() code out
pci_bus_find_domain_nr() retrieves the host bridge domain number in a DT-specific way. Rename it to of_pci_bus_find_domain_nr() to reflect that, so we can add a corresponding function for ACPI. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
|
Tomasz Nowicki
|
9c7cb891ec |
PCI: Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC
Instead of assigning bus->domain_nr inside pci_bus_assign_domain_nr(), return the domain and let the caller do the assignment. Rename pci_bus_assign_domain_nr() to pci_bus_find_domain_nr() to reflect this. No functional change intended. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
|
Sinan Kaya
|
4d3f138459 |
PCI: Add pci_unmap_iospace() to unmap I/O resources
Add pci_unmap_iospace() to undo what pci_remap_iospace() did. This is needed to support hotplug removal of host bridges that use pci_remap_iospace(). [bhelgaas: changelog] Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
||
|
Bjorn Helgaas
|
e257ef55ce |
Merge branches 'pci/arm64' and 'pci/host-hv' into next
* pci/arm64: PCI, of: Move PCI I/O space management to PCI core code PCI: generic, thunder: Use generic ECAM API PCI: Provide common functions for ECAM mapping * pci/host-hv: PCI: hv: Add explicit barriers to config space access |
||
|
Bjorn Helgaas
|
45604e68ed |
Merge branches 'pci/hotplug' and 'pci/resource' into next
* pci/hotplug: PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit * pci/resource: PCI: Disable all BAR sizing for devices with non-compliant BARs x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs |
||
|
Alex Williamson
|
92efb1bd9b |
PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
Resource flags are exposed to userspace via the sysfs "resource" file. lspci reads the sysfs file to determine resource properties. Add a "BAR Equivalent Indicator" flag so lspci can distinguish between [virtual] and [enhanced] resources. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Tomasz Nowicki
|
c5076cfe76 |
PCI, of: Move PCI I/O space management to PCI core code
No functional changes in this patch. PCI I/O space mapping code does not depend on OF; therefore it can be moved to PCI core code. This way we will be able to use it, e.g., in ACPI PCI code. Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Liviu Dudau <Liviu.Dudau@arm.com> |
||
|
Bjorn Helgaas
|
7f768544c2 |
Merge branches 'pci/enumeration', 'pci/hotplug', 'pci/misc', 'pci/ntb', 'pci/thunderbolt' and 'pci/virtualization' into next
* pci/enumeration: x86/PCI: Refine PCI support check in pcibios_init() * pci/hotplug: PCI: acpiphp_ibm: Avoid uninitialized variable reference * pci/misc: PCI: Fix spelling errors * pci/ntb: PCI: Add DMA alias quirk for mic_x200_dma PCI: Add support for multiple DMA aliases PCI: Move informational printk to pci_add_dma_alias() PCI: Add pci_add_dma_alias() to abstract implementation * pci/thunderbolt: thunderbolt: Support 1st gen Light Ridge controller thunderbolt: Fix typos and magic number PCI: Add Intel Thunderbolt device IDs * pci/virtualization: PCI: Work around Intel Sunrise Point PCH incorrect ACS capability PCI: Reverse standard ACS vs device-specific ACS enabling PCI: Mark Intel i40e NIC INTx masking as broken |
||
|
Alex Williamson
|
c1d61c9bb1 |
PCI: Reverse standard ACS vs device-specific ACS enabling
The original thought was that if a device implemented ACS, then surely we want to use that... well, it turns out that devices can make an ACS capability so broken that we still need to fall back to quirks. Reverse the order of ACS enabling to give quirks first shot at it. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Jacek Lawrynowicz
|
338c3149a2 |
PCI: Add support for multiple DMA aliases
Solve IOMMU support issues with PCIe non-transparent bridges that use Requester ID look-up tables (RID-LUT), e.g., the PEX8733. The NTB connects devices in two independent PCI domains. Devices separated by the NTB are not able to discover each other. A PCI packet being forwared from one domain to another has to have its RID modified so it appears on correct bus and completions are forwarded back to the original domain through the NTB. The RID is translated using a preprogrammed table (LUT) and the PCI packet propagates upstream away from the NTB. If the destination system has IOMMU enabled, the packet will be discarded because the new RID is unknown to the IOMMU. Adding a DMA alias for the new RID allows IOMMU to properly recognize the packet. Each device behind the NTB has a unique RID assigned in the RID-LUT. The current DMA alias implementation supports only a single alias, so it's not possible to support mutiple devices behind the NTB when IOMMU is enabled. Enable all possible aliases on a given bus (256) that are stored in a bitset. Alias devfn is directly translated to a bit number. The bitset is not allocated for devices that have no need for DMA aliases. More details can be found in the following article: http://www.plxtech.com/files/pdf/technical/expresslane/RTC_Enabling%20MulitHostSystemDesigns.pdf Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> |
||
|
Bjorn Helgaas
|
48c830809c |
PCI: Move informational printk to pci_add_dma_alias()
One of the quirks that adds DMA aliases logs an informational message in dmesg. Move that to pci_add_dma_alias() so all users log the message consistently. No functional change intended (except extra message). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Bjorn Helgaas
|
f0af959337 |
PCI: Add pci_add_dma_alias() to abstract implementation
Add a pci_add_dma_alias() interface to encapsulate the details of adding an alias. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Colin Ian King
|
dcbb408ac5 |
PCI: Fix spelling errors
Fix spelling of "initalization". [bhelgaas: also fix pci/pci.c] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Linus Torvalds
|
63e30271b0 |
PCI changes for the v4.6 merge window:
Enumeration
Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
Resource management
Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
Don't assign or reassign immutable resources (Bjorn Helgaas)
Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
Virtualization
Wait for up to 1000ms after FLR reset (Alex Williamson)
Support SR-IOV on any function type (Kelly Zytaruk)
Add ACS quirk for all Cavium devices (Manish Jaggi)
AER
Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
Restore pci_ops pointer while calling original pci_ops (David Daney)
Fix aer_inject error codes (Jean Delvare)
Use dev_warn() in aer_inject (Jean Delvare)
Log actual error causes in aer_inject (Jean Delvare)
Log aer_inject error injections (Jean Delvare)
VPD
Prevent VPD access for buggy devices (Babu Moger)
Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
Update VPD definitions (Hannes Reinecke)
Allow access to VPD attributes with size 0 (Hannes Reinecke)
Determine actual VPD size on first access (Hannes Reinecke)
Generic host bridge driver
Move structure definitions to separate header file (David Daney)
Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
Expose pci_host_common_probe() for use by other drivers (David Daney)
Altera host bridge driver
Fix altera_pcie_link_is_up() (Ley Foon Tan)
Cavium ThunderX host bridge driver
Add PCIe host driver for ThunderX processors (David Daney)
Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
Freescale i.MX6 host bridge driver
Add DT bindings to configure PHY Tx driver settings (Justin Waters)
Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
Remove broken Gen2 workaround (Lucas Stach)
Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
Freescale Layerscape host bridge driver
Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
Intel VMD host bridge driver
Attach VMD resources to parent domain's resource tree (Jon Derrick)
Set bus resource start to 0 (Keith Busch)
Microsoft Hyper-V host bridge driver
Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
Look up IRQ domain by fwnode_handle (Jake Oshins)
Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
NVIDIA Tegra host bridge driver
Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
Implement ->{add,remove}_bus() callbacks (Thierry Reding)
Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
Track bus -> CPU mapping (Thierry Reding)
Remove misleading PHYS_OFFSET (Thierry Reding)
Renesas R-Car host bridge driver
Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
Synopsys DesignWare host bridge driver
ARC: Add PCI support (Joao Pinto)
Add generic dw_pcie_wait_for_link() (Joao Pinto)
Add default link up check if sub-driver doesn't override (Joao Pinto)
Add driver for prototyping kits based on ARC SDP (Joao Pinto)
TI Keystone host bridge driver
Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
Xilinx AXI host bridge driver
Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
Xilinx NWL host bridge driver
Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
Miscellaneous
Check device_attach() return value always (Bjorn Helgaas)
Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
Move pci_dma_* helpers to common code (Christoph Hellwig)
Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=otsF
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for v4.6:
Enumeration:
- Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
- Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
Resource management:
- Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
- Don't assign or reassign immutable resources (Bjorn Helgaas)
- Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
- Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
- Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
- ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
- ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
- MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
- Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
- Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
- rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
- designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
Virtualization:
- Wait for up to 1000ms after FLR reset (Alex Williamson)
- Support SR-IOV on any function type (Kelly Zytaruk)
- Add ACS quirk for all Cavium devices (Manish Jaggi)
AER:
- Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
- Restore pci_ops pointer while calling original pci_ops (David Daney)
- Fix aer_inject error codes (Jean Delvare)
- Use dev_warn() in aer_inject (Jean Delvare)
- Log actual error causes in aer_inject (Jean Delvare)
- Log aer_inject error injections (Jean Delvare)
VPD:
- Prevent VPD access for buggy devices (Babu Moger)
- Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
- Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
- Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
- Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
- Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
- Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
- Update VPD definitions (Hannes Reinecke)
- Allow access to VPD attributes with size 0 (Hannes Reinecke)
- Determine actual VPD size on first access (Hannes Reinecke)
Generic host bridge driver:
- Move structure definitions to separate header file (David Daney)
- Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
- Expose pci_host_common_probe() for use by other drivers (David Daney)
Altera host bridge driver:
- Fix altera_pcie_link_is_up() (Ley Foon Tan)
Cavium ThunderX host bridge driver:
- Add PCIe host driver for ThunderX processors (David Daney)
- Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
Freescale i.MX6 host bridge driver:
- Add DT bindings to configure PHY Tx driver settings (Justin Waters)
- Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
- Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
- Remove broken Gen2 workaround (Lucas Stach)
- Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
Freescale Layerscape host bridge driver:
- Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
Intel VMD host bridge driver:
- Attach VMD resources to parent domain's resource tree (Jon Derrick)
- Set bus resource start to 0 (Keith Busch)
Microsoft Hyper-V host bridge driver:
- Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
- Look up IRQ domain by fwnode_handle (Jake Oshins)
- Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
NVIDIA Tegra host bridge driver:
- Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
- Implement ->{add,remove}_bus() callbacks (Thierry Reding)
- Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
- Track bus -> CPU mapping (Thierry Reding)
- Remove misleading PHYS_OFFSET (Thierry Reding)
Renesas R-Car host bridge driver:
- Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
Synopsys DesignWare host bridge driver:
- ARC: Add PCI support (Joao Pinto)
- Add generic dw_pcie_wait_for_link() (Joao Pinto)
- Add default link up check if sub-driver doesn't override (Joao Pinto)
- Add driver for prototyping kits based on ARC SDP (Joao Pinto)
TI Keystone host bridge driver:
- Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
Xilinx AXI host bridge driver:
- Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
- Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
- Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
- Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
- microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
Xilinx NWL host bridge driver:
- Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
Miscellaneous:
- Check device_attach() return value always (Bjorn Helgaas)
- Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
- Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
- ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
- Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
- Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
- Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
- unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
- Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
- Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
- Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
- frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
- Move pci_dma_* helpers to common code (Christoph Hellwig)
- Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
- Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
- Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"
* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
PCI: designware: Add driver for prototyping kits based on ARC SDP
PCI: designware: Add default link up check if sub-driver doesn't override
PCI: designware: Add generic dw_pcie_wait_for_link()
PCI: Cleanup pci/pcie/Kconfig whitespace
PCI: Simplify pci_create_attr() control flow
PCI: Don't leak memory if sysfs_create_bin_file() fails
PCI: Simplify sysfs ROM cleanup
PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
ia64/PCI: Use ioremap() instead of open-coded equivalent
ia64/PCI: Use temporary struct resource * to avoid repetition
PCI: Clean up pci_map_rom() whitespace
PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
PCI: thunder: Add PCIe host driver for ThunderX processors
PCI: generic: Expose pci_host_common_probe() for use by other drivers
PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
...
|
||
|
Bjorn Helgaas
|
18e5e6913b |
Merge branches 'pci/aer', 'pci/enumeration', 'pci/kconfig', 'pci/misc', 'pci/virtualization' and 'pci/vpd' into next
* pci/aer:
PCI/AER: Log aer_inject error injections
PCI/AER: Log actual error causes in aer_inject
PCI/AER: Use dev_warn() in aer_inject
PCI/AER: Fix aer_inject error codes
* pci/enumeration:
PCI: Fix broken URL for Dell biosdevname
* pci/kconfig:
PCI: Cleanup pci/pcie/Kconfig whitespace
PCI: Include pci/hotplug Kconfig directly from pci/Kconfig
PCI: Include pci/pcie/Kconfig directly from pci/Kconfig
* pci/misc:
PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
PCI: Add QEMU top-level IDs for (sub)vendor & device
unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition
PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h
PCI: Move pci_dma_* helpers to common code
frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration
* pci/virtualization:
PCI: Wait for up to 1000ms after FLR reset
PCI: Support SR-IOV on any function type
* pci/vpd:
PCI: Prevent VPD access for buggy devices
PCI: Sleep rather than busy-wait for VPD access completion
PCI: Fold struct pci_vpd_pci22 into struct pci_vpd
PCI: Rename VPD symbols to remove unnecessary "pci22"
PCI: Remove struct pci_vpd_ops.release function pointer
PCI: Move pci_vpd_release() from header file to pci/access.c
PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code
PCI: Determine actual VPD size on first access
PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy
PCI: Allow access to VPD attributes with size 0
PCI: Update VPD definitions
|
||
|
Alex Williamson
|
5adecf817d |
PCI: Wait for up to 1000ms after FLR reset
Some devices take longer than the spec indicates to return from FLR reset, a notable case of this is Intel integrated graphics (IGD), which can often take an additional 300ms powering down an attached LCD panel as part of the FLR. Allow devices up to 1000ms, testing every 100ms whether the second dword of config space is read as -1. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Krzysztof =?utf-8?Q?Ha=C5=82asa?=
|
54c6e2dd00 |
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
pci_create_root_bus() passes a "parent" pointer to pci_bus_assign_domain_nr(). When CONFIG_PCI_DOMAINS_GENERIC is defined, pci_bus_assign_domain_nr() dereferences that pointer. Many callers of pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL pointer dereference error. |
||
|
Bjorn Helgaas
|
fe537670ea |
PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h
Christoph added a generic include/linux/pci-dma-compat.h, so now there's
one place with most of the PCI DMA interfaces. Move more PCI DMA-related
things there:
- The PCI_DMA_* direction constants from linux/pci.h
- The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary()
CONFIG_PCI implementations from drivers/pci/pci.c
- The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary()
!CONFIG_PCI stubs from linux/pci.h
- The pci_set_dma_mask() and pci_set_consistent_dma_mask()
!CONFIG_PCI stubs from linux/pci.h
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
||
|
Bjorn Helgaas
|
5bd28338d6 |
PCI: Remove includes of empty asm-generic/pci-bridge.h
include/asm-generic/pci-bridge.h is now empty, so remove every #include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com> (arm64) |
||
|
Linus Torvalds
|
d43421565b |
PCI changes for the v4.5 merge window:
Enumeration
Simplify config space size computation (Bjorn Helgaas)
Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
Support PCIe devices with short cfg_size (Jason S. McMullan)
Add Netronome vendor and device IDs (Jason S. McMullan)
Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
Add Netronome NFP4000 PF device ID (Simon Horman)
Limit config space size for Netronome NFP4000 (Simon Horman)
Print warnings for all invalid expansion ROM headers (Vladis Dronov)
Resource management
Fix minimum allocation address overwrite (Christoph Biedl)
PCI device hotplug
acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
shpchp: Constify hpc_ops structure (Julia Lawall)
ibmphp: Remove unneeded NULL test (Julia Lawall)
Power management
Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
Virtualization
Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
MSI
Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
Initialize MSI capability for all architectures (Guilherme G. Piccoli)
Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
ARM Versatile host bridge driver
Remove unused pci_sys_data structures (Lorenzo Pieralisi)
Broadcom iProc host bridge driver
Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
Do not use 0x in front of %pap (Dmitry V. Krivenok)
Update iProc PCIe device tree binding (Ray Jui)
Add PAXC interface support (Ray Jui)
Add iProc PCIe MSI device tree binding (Ray Jui)
Add iProc PCIe MSI support (Ray Jui)
Freescale i.MX6 host bridge driver
Use gpio_set_value_cansleep() (Fabio Estevam)
Add support for active-low reset GPIO (Petr Štetiar)
HiSilicon host bridge driver
Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
Intel VMD host bridge driver
Export irq_domain_set_info() for module use (Keith Busch)
x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
Use 32 bit PCI domain numbers (Keith Busch)
Add driver for Intel Volume Management Device (VMD) (Keith Busch)
Qualcomm host bridge driver
Document PCIe devicetree bindings (Stanimir Varbanov)
Add Qualcomm PCIe controller driver (Stanimir Varbanov)
dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
Renesas R-Car host bridge driver
Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
Allow DT to override default window settings (Phil Edworthy)
Convert to DT resource parsing API (Phil Edworthy)
Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
Add runtime PM support to pcie-rcar (Phil Edworthy)
Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
Synopsys DesignWare host bridge driver
Simplify control flow (Bjorn Helgaas)
Make config accessor override checking symmetric (Bjorn Helgaas)
Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
Miscellaneous
Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
Fix all whitespace issues (Bogicevic Sasa)
x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
Use to_pci_dev() instead of open-coding it (Geliang Tang)
Use kobj_to_dev() instead of open-coding it (Geliang Tang)
Use list_for_each_entry() to simplify code (Geliang Tang)
Fix typos in <linux/msi.h> (Thomas Petazzoni)
x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWoQIuAAoJEFmIoMA60/r8ckYP/0ZrkANeN1SB5cQVi2k7aceq
kQb1Hk6ifxohJvgpJ/iwmVCHoApyeBfUBfrC+fUpIC2f7ncPsE5HNyjqpAWzFzj2
sYWwY029yjBQ9g4mPhkvjBXfha+lNtLthWc+Xxcat5pdcyG63Dg4SfJKWm2ZYnbN
0GJzyRZXIwAMnNf0KIr61Aqru0nXeHvi5wblyJ08UZ7AcNzCtB0wKLmE3S6SeZVF
f2fry35zcGu+TFvQ1hAYemfl3XyDBJ87nPiKzJAwYSaKcWPFWt+72PBDPO6X9squ
6prm4nmAgeG2Oo4Zu0fbkDlB2bEsWUc14/xT0i5Wfs35vcwzF+S1zirJAtVqoNir
NgC7fSbEHbsS7FZOz0rBOBIvIkbb6NdfLFuZqUFv0X1M5bRFywjo8lZRfAYoGJzK
Mmus0uKbklx5m6RT5adf9+Plev1YJT6XZW9XrDpGnxrwRyPjHmyvuTWsYkumxY7Q
CE5Wr3p7q2I2+MtrQVv2D9Nzsb+4zQ6BgHrd2vwR/IxTsfdXLU7+B691wkUDX8No
UKFxBd0FiVCn+srG96u7lWQvdoUqoNCogTZSVzGR5gFBv3zAN9gi8HS7NbV558Mg
Io3Xw+6dcbG33uvWdU6jHEDLMQsohZcp05Q5esCgRQNV4cGJbPxBDtOZEO/ezvW4
FAI7lfgYTFiQK3NzE3Ng
=z9mQ
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.5 merge window:
Enumeration:
- Simplify config space size computation (Bjorn Helgaas)
- Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
- Support PCIe devices with short cfg_size (Jason S. McMullan)
- Add Netronome vendor and device IDs (Jason S. McMullan)
- Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
- Add Netronome NFP4000 PF device ID (Simon Horman)
- Limit config space size for Netronome NFP4000 (Simon Horman)
- Print warnings for all invalid expansion ROM headers (Vladis Dronov)
Resource management:
- Fix minimum allocation address overwrite (Christoph Biedl)
PCI device hotplug:
- acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
- pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
- shpchp: Constify hpc_ops structure (Julia Lawall)
- ibmphp: Remove unneeded NULL test (Julia Lawall)
Power management:
- Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
Virtualization
- Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
MSI:
- Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
- Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
- Initialize MSI capability for all architectures (Guilherme G. Piccoli)
- Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
ARM Versatile host bridge driver:
- Remove unused pci_sys_data structures (Lorenzo Pieralisi)
Broadcom iProc host bridge driver:
- Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
- Do not use 0x in front of %pap (Dmitry V. Krivenok)
- Update iProc PCIe device tree binding (Ray Jui)
- Add PAXC interface support (Ray Jui)
- Add iProc PCIe MSI device tree binding (Ray Jui)
- Add iProc PCIe MSI support (Ray Jui)
Freescale i.MX6 host bridge driver:
- Use gpio_set_value_cansleep() (Fabio Estevam)
- Add support for active-low reset GPIO (Petr Štetiar)
HiSilicon host bridge driver:
- Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
Intel VMD host bridge driver:
- Export irq_domain_set_info() for module use (Keith Busch)
- x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
- Use 32 bit PCI domain numbers (Keith Busch)
- Add driver for Intel Volume Management Device (VMD) (Keith Busch)
Qualcomm host bridge driver:
- Document PCIe devicetree bindings (Stanimir Varbanov)
- Add Qualcomm PCIe controller driver (Stanimir Varbanov)
- dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
- dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
Renesas R-Car host bridge driver:
- Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
- Allow DT to override default window settings (Phil Edworthy)
- Convert to DT resource parsing API (Phil Edworthy)
- Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
- Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
- Add runtime PM support to pcie-rcar (Phil Edworthy)
- Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
- Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
- Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
Synopsys DesignWare host bridge driver:
- Simplify control flow (Bjorn Helgaas)
- Make config accessor override checking symmetric (Bjorn Helgaas)
- Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
Miscellaneous:
- Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
- Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
- Fix all whitespace issues (Bogicevic Sasa)
- x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
- Use to_pci_dev() instead of open-coding it (Geliang Tang)
- Use kobj_to_dev() instead of open-coding it (Geliang Tang)
- Use list_for_each_entry() to simplify code (Geliang Tang)
- Fix typos in <linux/msi.h> (Thomas Petazzoni)
- x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"
* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
PCI: Limit config space size for Netronome NFP4000
PCI: Add Netronome NFP4000 PF device ID
x86/PCI: Add driver for Intel Volume Management Device (VMD)
PCI/AER: Use 32 bit PCI domain numbers
x86/PCI: Allow DMA ops specific to a PCI domain
irqdomain: Export irq_domain_set_info() for module use
PCI: host: Add of_pci_get_host_bridge_resources() stub
genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
PCI: rcar: Add Gen2 PHY setup to pcie-rcar
PCI: rcar: Add runtime PM support to pcie-rcar
PCI: designware: Make config accessor override checking symmetric
PCI: ibmphp: Remove unneeded NULL test
ARM: dts: ifc6410: enable PCIe DT node for this board
ARM: dts: apq8064: add PCIe devicetree node
PCI: hotplug: Use list_for_each_entry() to simplify code
PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
PCI: Avoid iterating through memory outside the resource window
PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
...
|
||
|
Geliang Tang
|
f3d2f1655b |
PCI: Use to_pci_dev() instead of open-coding it
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Bogicevic Sasa
|
ff3ce480e8 |
PCI: Fix all whitespace issues
Fix all whitespace issues (missing or needed whitespace) in all files in drivers/pci. Code is compiled with allyesconfig before and after code changes and objects are recorded and checked with objdiff and they are not changed after this commit. Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Julia Lawall
|
299f2ffed3 |
PCI / PM: constify pci_platform_pm_ops structure
The pci_platform_pm_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
3c87b79188 |
PCI changes for the v4.4 merge window:
Resource management
Add support for Enhanced Allocation devices (Sean O. Stalley)
Add Enhanced Allocation register entries (Sean O. Stalley)
Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
Expand Enhanced Allocation BAR output (Bjorn Helgaas)
Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
Fix lookup of linux,pci-probe-only property (Marc Zyngier)
Add sparc mem64 resource parsing for root bus (Yinghai Lu)
PCI device hotplug
pciehp: Queue power work requests in dedicated function (Guenter Roeck)
Driver binding
Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)
Virtualization
Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
Reorder pcibios_sriov_disable() (Alexander Duyck)
Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
Don't try to restore VF BARs (Wei Yang)
MSI
Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
Export all remapped MSIs to sysfs attributes (Romain Bezut)
Disable MSI on SiS 761 (Ondrej Zary)
AER
Clear error status registers during enumeration and restore (Taku Izumi)
Generic host bridge driver
Fix lookup of linux,pci-probe-only property (Marc Zyngier)
Allow multiple hosts with different map_bus() methods (David Daney)
Pass starting bus number to pci_scan_root_bus() (David Daney)
Fix address window calculation for non-zero starting bus (David Daney)
Altera host bridge driver
Add msi.h to ARM Kbuild (Ley Foon Tan)
Add Altera PCIe host controller driver (Ley Foon Tan)
Add Altera PCIe MSI driver (Ley Foon Tan)
APM X-Gene host bridge driver
Remove msi_controller assignment (Duc Dang)
Broadcom iProc host bridge driver
Fix header comment "Corporation" misspelling (Florian Fainelli)
Fix code comment to match code (Ray Jui)
Remove unused struct iproc_pcie.irqs[] (Ray Jui)
Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
Fix PCIe reset logic (Ray Jui)
Improve link detection logic (Ray Jui)
Update PCIe device tree bindings (Ray Jui)
Add outbound mapping support (Ray Jui)
Freescale i.MX6 host bridge driver
Return real error code from imx6_add_pcie_port() (Fabio Estevam)
Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)
Freescale Layerscape host bridge driver
Remove ls_pcie_establish_link() (Minghuan Lian)
Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
Factor out SCFG related function (Minghuan Lian)
Update ls_add_pcie_port() (Minghuan Lian)
Remove unused fields from struct ls_pcie (Minghuan Lian)
Add support for LS1043a and LS2080a (Minghuan Lian)
Add ls_pcie_msi_host_init() (Minghuan Lian)
HiSilicon host bridge driver
Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)
Marvell MVEBU host bridge driver
Return zero for reserved or unimplemented config space (Russell King)
Use exact config access size; don't read/modify/write (Russell King)
Use of_get_available_child_count() (Russell King)
Use for_each_available_child_of_node() to walk child nodes (Russell King)
Report full node name when reporting a DT error (Russell King)
Use port->name rather than "PCIe%d.%d" (Russell King)
Move port parsing and resource claiming to separate function (Russell King)
Fix memory leaks and refcount leaks (Russell King)
Split port parsing and resource claiming from port setup (Russell King)
Use gpio_set_value_cansleep() (Russell King)
Use devm_kcalloc() to allocate an array (Russell King)
Use gpio_desc to carry around gpio (Russell King)
Improve clock/reset handling (Russell King)
Add PCI Express root complex capability block (Russell King)
Remove code restricting accesses to slot 0 (Russell King)
NVIDIA Tegra host bridge driver
Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)
Renesas R-Car host bridge driver
Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
Make PCI aware of the I/O resources (Phil Edworthy)
Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
Set root bus nr to that provided in DT (Phil Edworthy)
Fix I/O offset for multiple host bridges (Phil Edworthy)
ST Microelectronics SPEAr13xx host bridge driver
Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)
Synopsys DesignWare host bridge driver
Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
Require config accesses to be naturally aligned (Gabriele Paoloni)
Make "num-lanes" an optional DT property (Gabriele Paoloni)
Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
Factor out MSI msg setup (Lucas Stach)
Implement multivector MSI IRQ setup (Lucas Stach)
Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
Set up high part of MSI target address (Lucas Stach)
Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
Make driver arch-agnostic (Zhou Wang)
Miscellaneous
Make x86 pci_subsys_init() static (Alexander Kuleshov)
Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uZrt
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Resource management:
- Add support for Enhanced Allocation devices (Sean O. Stalley)
- Add Enhanced Allocation register entries (Sean O. Stalley)
- Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
- Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
- Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
- Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
- Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
- Expand Enhanced Allocation BAR output (Bjorn Helgaas)
- Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
- Fix lookup of linux,pci-probe-only property (Marc Zyngier)
- Add sparc mem64 resource parsing for root bus (Yinghai Lu)
PCI device hotplug:
- pciehp: Queue power work requests in dedicated function (Guenter Roeck)
Driver binding:
- Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)
Virtualization:
- Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
- Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
- Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
- Reorder pcibios_sriov_disable() (Alexander Duyck)
- Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
- Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
- Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
- Don't try to restore VF BARs (Wei Yang)
MSI:
- Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
- Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
- Export all remapped MSIs to sysfs attributes (Romain Bezut)
- Disable MSI on SiS 761 (Ondrej Zary)
AER:
- Clear error status registers during enumeration and restore (Taku Izumi)
Generic host bridge driver:
- Fix lookup of linux,pci-probe-only property (Marc Zyngier)
- Allow multiple hosts with different map_bus() methods (David Daney)
- Pass starting bus number to pci_scan_root_bus() (David Daney)
- Fix address window calculation for non-zero starting bus (David Daney)
Altera host bridge driver:
- Add msi.h to ARM Kbuild (Ley Foon Tan)
- Add Altera PCIe host controller driver (Ley Foon Tan)
- Add Altera PCIe MSI driver (Ley Foon Tan)
APM X-Gene host bridge driver:
- Remove msi_controller assignment (Duc Dang)
Broadcom iProc host bridge driver:
- Fix header comment "Corporation" misspelling (Florian Fainelli)
- Fix code comment to match code (Ray Jui)
- Remove unused struct iproc_pcie.irqs[] (Ray Jui)
- Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
- Fix PCIe reset logic (Ray Jui)
- Improve link detection logic (Ray Jui)
- Update PCIe device tree bindings (Ray Jui)
- Add outbound mapping support (Ray Jui)
Freescale i.MX6 host bridge driver:
- Return real error code from imx6_add_pcie_port() (Fabio Estevam)
- Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)
Freescale Layerscape host bridge driver:
- Remove ls_pcie_establish_link() (Minghuan Lian)
- Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
- Factor out SCFG related function (Minghuan Lian)
- Update ls_add_pcie_port() (Minghuan Lian)
- Remove unused fields from struct ls_pcie (Minghuan Lian)
- Add support for LS1043a and LS2080a (Minghuan Lian)
- Add ls_pcie_msi_host_init() (Minghuan Lian)
HiSilicon host bridge driver:
- Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)
Marvell MVEBU host bridge driver:
- Return zero for reserved or unimplemented config space (Russell King)
- Use exact config access size; don't read/modify/write (Russell King)
- Use of_get_available_child_count() (Russell King)
- Use for_each_available_child_of_node() to walk child nodes (Russell King)
- Report full node name when reporting a DT error (Russell King)
- Use port->name rather than "PCIe%d.%d" (Russell King)
- Move port parsing and resource claiming to separate function (Russell King)
- Fix memory leaks and refcount leaks (Russell King)
- Split port parsing and resource claiming from port setup (Russell King)
- Use gpio_set_value_cansleep() (Russell King)
- Use devm_kcalloc() to allocate an array (Russell King)
- Use gpio_desc to carry around gpio (Russell King)
- Improve clock/reset handling (Russell King)
- Add PCI Express root complex capability block (Russell King)
- Remove code restricting accesses to slot 0 (Russell King)
NVIDIA Tegra host bridge driver:
- Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)
Renesas R-Car host bridge driver:
- Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
- Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
- Make PCI aware of the I/O resources (Phil Edworthy)
- Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
- Set root bus nr to that provided in DT (Phil Edworthy)
- Fix I/O offset for multiple host bridges (Phil Edworthy)
ST Microelectronics SPEAr13xx host bridge driver:
- Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)
Synopsys DesignWare host bridge driver:
- Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
- Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
- Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
- Require config accesses to be naturally aligned (Gabriele Paoloni)
- Make "num-lanes" an optional DT property (Gabriele Paoloni)
- Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
- Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
- Factor out MSI msg setup (Lucas Stach)
- Implement multivector MSI IRQ setup (Lucas Stach)
- Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
- Set up high part of MSI target address (Lucas Stach)
- Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
- Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
- Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
- Make driver arch-agnostic (Zhou Wang)
Miscellaneous:
- Make x86 pci_subsys_init() static (Alexander Kuleshov)
- Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)"
* tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
PCI: altera: Add Altera PCIe MSI driver
PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
PCI: layerscape: Add ls_pcie_msi_host_init()
PCI: layerscape: Add support for LS1043a and LS2080a
PCI: layerscape: Remove unused fields from struct ls_pcie
PCI: layerscape: Update ls_add_pcie_port()
PCI: layerscape: Factor out SCFG related function
PCI: layerscape: Ignore PCIe controllers in Endpoint mode
PCI: layerscape: Remove ls_pcie_establish_link()
PCI: designware: Make "clocks" and "clock-names" optional DT properties
PCI: designware: Make driver arch-agnostic
ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
Revert "PCI: designware: Program ATU with untranslated address"
PCI: designware: Move calculation of bus addresses to DRA7xx
PCI: designware: Make "num-lanes" an optional DT property
PCI: designware: Require config accesses to be naturally aligned
PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
PCI: designware: Use exact access size in dw_pcie_cfg_read()
PCI: spear: Fix dw_pcie_cfg_read/write() usage
...
|
||
|
Bjorn Helgaas
|
1f9a30ec2a |
Merge branches 'pci/aer', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/resource' and 'pci/virtualization' into next
* pci/aer: PCI/AER: Clear error status registers during enumeration and restore * pci/hotplug: PCI: pciehp: Queue power work requests in dedicated function * pci/misc: PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum x86/PCI: Make pci_subsys_init() static PCI: Add builtin_pci_driver() to avoid registration boilerplate PCI: Remove unnecessary "if" statement * pci/msi: x86/PCI: Don't alloc pcibios-irq when MSI is enabled PCI/MSI: Export all remapped MSIs to sysfs attributes PCI: Disable MSI on SiS 761 * pci/resource: sparc/PCI: Add mem64 resource parsing for root bus PCI: Expand Enhanced Allocation BAR output PCI: Make Enhanced Allocation bitmasks more obvious PCI: Handle Enhanced Allocation capability for SR-IOV devices PCI: Add support for Enhanced Allocation devices PCI: Add Enhanced Allocation register entries PCI: Handle IORESOURCE_PCI_FIXED when assigning resources PCI: Handle IORESOURCE_PCI_FIXED when sizing resources PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned address * pci/virtualization: PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failures PCI: Wait 1 second between disabling VFs and clearing NumVFs PCI: Reorder pcibios_sriov_disable() PCI: Remove VFs in reverse order if virtfn_add() fails PCI: Remove redundant validation of SR-IOV offset/stride registers PCI: Set SR-IOV NumVFs to zero after enumeration PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs PCI: Don't try to restore VF BARs |
||
|
Bjorn Helgaas
|
597becb4ad |
PCI: Expand Enhanced Allocation BAR output
An Enhanced Allocation Capability entry with BEI 0 fills in dev->resource[0] just like a real BAR 0 would, but non-EA experts might not connect "EA - BEI 0" with BAR 0. Decode the EA jargon a little bit, e.g., change this: pci 0002:01:00.0: EA - BEI 0, Prop 0x00: [mem 0x84300000-0x84303fff] to this: pci 0002:01:00.0: BAR 0: [mem 0x84300000-0x84303fff] (from Enhanced Allocation, properties 0x00) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Bjorn Helgaas
|
26635112d4 |
PCI: Make Enhanced Allocation bitmasks more obvious
Expand bitmask #defines completely. This puts the shift in the code instead of in the #define, but it makes it more obvious in the header file how fields in the register are laid out. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
David Daney
|
111839917f |
PCI: Handle Enhanced Allocation capability for SR-IOV devices
SR-IOV BARs can be specified via EA entries. Extend the EA parser to extract the SRIOV BAR resources, and modify sriov_init() to use resources previously obtained via EA. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean O. Stalley <sean.stalley@intel.com> |
||
|
Sean O. Stalley
|
938174e59f |
PCI: Add support for Enhanced Allocation devices
Add support for devices using Enhanced Allocation entries instead of BARs. This allows the kernel to parse the EA Extended Capability structure in PCI config space and claim the BAR-equivalent resources. See https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_Allocation_23_Oct_2014_Final.pdf [bhelgaas: add spec URL, s/pci_ea_set_flags/pci_ea_flags/, consolidate declarations, print unknown property in hex to match spec] Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> [david.daney@cavium.com: Add more support/checking for Entry Properties, allow EA behind bridges, rewrite some error messages.] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Hariprasad Shenai
|
c56d4450eb |
PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum
The Chelsio T5 has a PCIe compliance erratum that causes Malformed TLP or Unexpected Completion errors in some systems, which may cause device access timeouts. Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same values for the Attribute as were supplied in the header of the corresponding Request, except as explicitly allowed when IDO is used." Instead of copying the Attributes from the Request to the Completion, the T5 always generates Completions with zero Attributes. The receiver of a Completion whose Attributes don't match the Request may accept it (which itself seems non-compliant based on sec 2.3.2), or it may handle it as a Malformed TLP or an Unexpected Completion, which will probably lead to a device access timeout. Work around this by disabling "Relaxed Ordering" and "No Snoop" in the Root Port so it always generate Requests with zero Attributes. This does affect all other devices which are downstream of that Root Port, but these are performance optimizations that should not make a functional difference. Note that Configuration Space accesses are never supposed to have TLP Attributes, so we're safe waiting till after any Configuration Space accesses to do the Root Port "fixup". Based on original work by Casey Leedom <leedom@chelsio.com> [bhelgaas: changelog, comments, rename to pci_find_pcie_root_port(), rework to use pci_upstream_bridge() and check for Root Port device type, edit diagnostics to clarify intent and devices affected] Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Rafael J. Wysocki
|
2cef548adf |
PCI / PM: Avoid resuming more devices during system suspend
Commit
|
||
|
Taku Izumi
|
b07461a8e4 |
PCI/AER: Clear error status registers during enumeration and restore
AER errors might be recorded when powering-on devices. These errors can be ignored, so firmware usually clears them before the OS enumerates devices. However, firmware is not involved when devices are added via hotplug, so the OS may discover power-up errors that should be ignored. The same may happen when powering up devices when resuming after suspend. Clear the AER error status registers during enumeration and resume. [bhelgaas: changelog, remove repetitive comments] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Wei Yang
|
70675e0b6a |
PCI: Don't try to restore VF BARs
VF BARs are read-only zero, so updating VF BARs will not have any effect.
See the SR-IOV spec r1.1, sec 3.4.1.11.
Don't update VF BARs in pci_restore_bars().
This avoids spurious "BAR %d: error updating" messages that we see when
doing vfio pass-through after
|
||
|
Linus Torvalds
|
25525bea46 |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar: "The dominant change in this cycle was the continued work to isolate kernel drivers from MTRR legacies: this tree gets rid of all kernel internal driver interfaces to MTRRs (mostly by rewriting it to proper PAT interfaces), the only access left is the /proc/mtrr ABI. This work was done by Luis R Rodriguez. There's also some related PCI interface additions for which I've Cc:-ed Bjorn" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/mm/mtrr: Remove kernel internal MTRR interfaces: unexport mtrr_add() and mtrr_del() s390/io: Add pci_iomap_wc() and pci_iomap_wc_range() drivers/dma/iop-adma: Use dma_alloc_writecombine() kernel-style drivers/video/fbdev/vt8623fb: Use arch_phys_wc_add() and pci_iomap_wc() drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc() drivers/video/fbdev/arkfb.c: Use arch_phys_wc_add() and pci_iomap_wc() PCI: Add pci_iomap_wc() variants drivers/video/fbdev/gxt4500: Use pci_ioremap_wc_bar() to map framebuffer drivers/video/fbdev/kyrofb: Use arch_phys_wc_add() and pci_ioremap_wc_bar() drivers/video/fbdev/i740fb: Use arch_phys_wc_add() and pci_ioremap_wc_bar() PCI: Add pci_ioremap_wc_bar() x86/mm: Make kernel/check.c explicitly non-modular x86/mm/pat: Make mm/pageattr[-test].c explicitly non-modular x86/mm/pat: Add comments to cachemode translation tables arch/*/io.h: Add ioremap_uc() to all architectures drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc() drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC drivers/video/fbdev/atyfb: Clarify ioremap() base and length used drivers/video/fbdev/atyfb: Carve out framebuffer length fudging into a helper x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default ... |
||
|
Bjorn Helgaas
|
9ca678d1df |
Merge branches 'pci/enumeration' and 'pci/misc' into next
* pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI |
||
|
Luis R. Rodriguez
|
c43996f400 |
PCI: Add pci_ioremap_wc_bar()
This lets drivers take advantage of PAT when available. It
should help with the transition of converting video drivers over
to ioremap_wc() to help with the goal of eventually using
_PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on
ioremap_nocache(), see:
|
||
|
Keith Busch
|
27d868b5e6 |
PCI: Set MPS to match upstream bridge
Firmware typically configures the PCIe fabric with a consistent Max Payload Size setting based on the devices present at boot. A hot-added device typically has the power-on default MPS setting (128 bytes), which may not match the fabric. The previous Linux default, in the absence of any "pci=pcie_bus_*" options, was PCIE_BUS_TUNE_OFF, in which we never touch MPS, even for hot-added devices. Add a new default setting, PCIE_BUS_DEFAULT, in which we make sure every device's MPS setting matches the upstream bridge. This makes it more likely that a hot-added device will work in a system with optimized MPS configuration. Note that if we hot-add a device that only supports 128-byte MPS, it still likely won't work because we don't reconfigure the rest of the fabric. Booting with "pci=pcie_bus_peer2peer" is a workaround for this because it sets MPS to 128 for everything. [bhelgaas: changelog, new default, rework for pci_configure_device() path] Tested-by: Keith Busch <keith.busch@intel.com> Tested-by: Jordan Hargrave <jharg93@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> |
||
|
Bjorn Helgaas
|
5a4f3cf0d1 |
Merge branches 'pci/irq', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next
* pci/irq:
PCI/MSI: Free legacy IRQ when enabling MSI/MSI-X
PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed
PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()
PCI: Add pcibios_alloc_irq() and pcibios_free_irq()
* pci/misc:
PCI: Remove unused "pci_probe" flags
PCI: Add VPD function 0 quirk for Intel Ethernet devices
PCI: Add dev_flags bit to access VPD through function 0
PCI / ACPI: Fix pci_acpi_optimize_delay() comment
PCI: Remove a broken link in quirks.c
PCI: Remove useless redundant code
PCI: Simplify pci_find_(ext_)capability() return value checks
PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirks
PCI: Add pcie_downstream_port() (true for Root and Switch Downstream Ports)
PCI: Fix pcie_port_device_resume() comment
PCI: Shift PCI_CLASS_NOT_DEFINED consistently with other classes
PCI: Revert
|
||
|
Alexander Duyck
|
ccbc175aad |
PCI: Restore ACS configuration as part of pci_restore_state()
Previously we did not restore ACS state after a PCIe reset. This meant that we could not reassign interfaces after a system suspend because the D0->D3 transition disabled ACS, and we didn't restore it when going back to D0. Restore ACS configuration in pci_restore_state(). [bhelgaas: changelog] Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Allen Kay <allen.m.kay@intel.com> CC: Chris Wright <chris@sous-sol.org> CC: Alex Williamson <alex.williamson@redhat.com> |
||
|
Bjorn Helgaas
|
aaed816fde |
PCI: Remove useless redundant code
Remove redundant code from __pci_bus_find_cap_start(). No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Wei Yang
|
0a1a9b4942 |
PCI: Simplify pci_find_(ext_)capability() return value checks
The return value of the pci_find_(ext_)capability() is either zero or the position of a capability. It is never negative. This patch consolidates the form of check from (pos <= 0) to (!pos). Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Wei Yang
|
fff905f329 |
PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirks
Some quirks search for a HyperTransport capability and use a hard-coded TTL value of 48 to avoid an infinite loop. Move the definition of PCI_FIND_CAP_TTL to pci.h and use it instead of the hard-coded TTL values. [bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Bjorn Helgaas
|
0ff9b9bad6 |
Merge branches 'pci/aspm', 'pci/enumeration', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/resource' and 'pci/virtualization' into next
* pci/aspm: PCI/ASPM: Simplify Clock Power Management setting PCI: Use dev->has_secondary_link to find downstream PCIe links PCI/ASPM: Use dev->has_secondary_link to find downstream links PCI: Add dev->has_secondary_link to track downstream PCIe links PCI/ASPM: Remove redundant PCIe port type checking PCI/ASPM: Drop __pci_disable_link_state() useless "force" parameter * pci/enumeration: PCI: Remove unused pci_scan_bus_parented() xen/pcifront: Don't use deprecated function pci_scan_bus_parented() PCI: designware: Use pci_scan_root_bus() for simplicity PCI: tegra: Remove tegra_pcie_scan_bus() PCI: mvebu: Remove mvebu_pcie_scan_bus() * pci/hotplug: PCI: pciehp: Wait for hotplug command completion where necessary PCI: Propagate the "ignore hotplug" setting to parent ACPI / hotplug / PCI: Check ignore_hotplug for all downstream devices PCI: pciehp: Drop pointless label from pciehp_probe() PCI: pciehp: Drop pointless ACPI-based "slot detection" check * pci/misc: PCI: Remove unused pci_dma_burst_advice() PCI: Remove unused pcibios_select_root() (again) PCI: Remove unnecessary #includes of <asm/pci.h> PCI: Include <linux/pci.h>, not <asm/pci.h> * pci/msi: PCI/MSI: Remove unused pci_msi_off() PCI/MSI: Drop pci_msi_off() calls from quirks ntb: Drop pci_msi_off() call during probe virtio_pci: drop pci_msi_off() call during probe PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI PCI/MSI: Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() PCI/MSI: Rename msi_set_enable(), msix_clear_and_set_ctrl() * pci/resource: PCI: Add pci_bus_addr_t * pci/virtualization: ACPI / PCI: Account for ARI in _PRT lookups PCI: Move pci_ari_enabled() to global header PCI: Add function 1 DMA alias quirk for Marvell 9120 PCI: Add ACS quirks for Intel 9-series PCH root ports |
||
|
Rafael J. Wysocki
|
0824965140 |
PCI: Propagate the "ignore hotplug" setting to parent
Refine the mechanism introduced by commit |
||
|
Bjorn Helgaas
|
c6201cd851 |
PCI/MSI: Remove unused pci_msi_off()
pci_msi_off() is unused, so remove it. Removes the exported symbol pci_msi_off(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Bjorn Helgaas
|
5468d5a64b |
Merge branch 'pci/misc' into next
* pci/misc: PCI: Read capability list as dwords, not bytes PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message |
||
|
Bjorn Helgaas
|
4dd1f57956 |
Merge branches 'pci/host-exynos', 'pci/host-iproc', 'pci/host-keystone', 'pci/host-layerscape', 'pci/host-mvebu', 'pci/host-rcar' and 'pci/host-versatile' into next
* pci/host-exynos: PCI: exynos: Fix INTx enablement statement termination error * pci/host-iproc: PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules * pci/host-keystone: PCI: keystone: Don't dereference possible NULL pointer * pci/host-layerscape: PCI: layerscape: Simplify platform_get_resource_byname() failure checking * pci/host-mvebu: PCI: mvebu: Add suspend/resume support * pci/host-rcar: PCI: rcar: Verify that mem_res is 64K-aligned PCI: rcar: Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR PCI: rcar: Write zeroes to reserved PCIEPARL bits PCI: rcar: Fix position of MSI enable bit * pci/host-versatile: PCI: versatile: Check for devm_ioremap_resource() failures |
||
|
Sean O. Stalley
|
55db3208f2 |
PCI: Read capability list as dwords, not bytes
Reading both the capability ID and "next" pointer at the same time lets us parse the list with half the number of config reads. Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Ray Jui
|
e6b29deafa |
PCI: Export symbols required for loadable host driver modules
Export the following symbols so they can be referenced by a PCI host bridge driver compiled as a kernel loadable module: pci_common_swizzle pci_create_root_bus pci_stop_root_bus pci_remove_root_bus pci_assign_unassigned_bus_resources pci_fixup_irqs Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Bjorn Helgaas
|
646c0282df |
PCI: Fail pci_ioremap_bar() on unassigned resources
Make pci_ioremap_bar() fail if we're trying to map a BAR that hasn't been assigned. Normally pci_enable_device() will fail if a BAR hasn't been assigned, but a driver can successfully call pci_enable_device_io() even if a memory BAR hasn't been assigned. That driver should not be able to use pci_ioremap_bar() to map that unassigned memory BAR. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Bjorn Helgaas
|
1f7bf3bfb5 |
PCI: Show driver, BAR#, and resource on pci_ioremap_bar() failure
Use dev_warn() to complain about a pci_ioremap_bar() failure so we can include the driver name, BAR number, and the resource itself. We could use dev_WARN() to also get the backtrace as we did previously, but I think that's more information than we need. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
872912352c |
ACPI and power management updates for v3.20-rc1
- Rework of the core ACPI resources parsing code to fix issues
in it and make using resource offsets more convenient and
consolidation of some resource-handing code in a couple of places
that have grown analagous data structures and code to cover the
the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng).
- ACPI-based IOAPIC hotplug support on top of the resources handling
rework (Jiang Liu, Yinghai Lu).
- ACPICA update to upstream release 20150204 including an interrupt
handling rework that allows drivers to install raw handlers for
ACPI GPEs which then become entirely responsible for the given GPE
and the ACPICA core code won't touch it (Lv Zheng, David E Box,
Octavian Purdila).
- ACPI EC driver rework to fix several concurrency issues and other
problems related to events handling on top of the ACPICA's new
support for raw GPE handlers (Lv Zheng).
- New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
Subsystem) driver for Intel chips (Ken Xue).
- Two minor fixes of the ACPI LPSS driver (Heikki Krogerus,
Jarkko Nikula).
- Two new blacklist entries for machines (Samsung 730U3E/740U3E and
510R) where the native backlight interface doesn't work correctly
while the ACPI one does (Hans de Goede).
- Rework of the ACPI processor driver's handling of idle states
to make the code more straightforward and less bloated overall
(Rafael J Wysocki).
- Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki,
Yaowei Bai).
- PCI core power management modification to avoid resuming (some)
runtime-suspended devices during system suspend if they are in
the right states already (Rafael J Wysocki).
- New SFI-based cpufreq driver for Intel platforms using SFI
(Srinidhi Kasagar).
- cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
Doug Anderson, Wolfram Sang).
- SkyLake CPU support and other updates for the intel_pstate driver
(Kristen Carlson Accardi, Srinivas Pandruvada).
- cpufreq-dt driver cleanup (Markus Elfring).
- Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
- Generic power domains core code fixes and cleanups (Ulf Hansson).
- Operating Performance Points (OPP) core code cleanups and kernel
documentation update (Nishanth Menon).
- New dabugfs interface to make the list of PM QoS constraints
available to user space (Nishanth Menon).
- New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
- New devfreq class (devfreq_event) to provide raw utilization data
to devfreq governors (Chanwoo Choi).
- Assorted minor fixes and cleanups related to power management
(Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist,
Pavel Machek, Todd E Brandt, Wonhong Kwon).
- turbostat updates (Len Brown) and cpupower Makefile improvement
(Sriram Raghunathan).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=zZER
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"We have a few new features this time, including a new SFI-based
cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new
devfreq class for providing its governors with raw utilization data
and a new ACPI driver for AMD SoCs.
Still, the majority of changes here are reworks of existing code to
make it more straightforward or to prepare it for implementing new
features on top of it. The primary example is the rework of ACPI
resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with
support for IOAPIC hotplug implemented on top of it, but there is
quite a number of changes of this kind in the cpufreq core, ACPICA,
ACPI EC driver, ACPI processor driver and the generic power domains
core code too.
The most active developer is Viresh Kumar with his cpufreq changes.
Specifics:
- Rework of the core ACPI resources parsing code to fix issues in it
and make using resource offsets more convenient and consolidation
of some resource-handing code in a couple of places that have grown
analagous data structures and code to cover the the same gap in the
core (Jiang Liu, Thomas Gleixner, Lv Zheng).
- ACPI-based IOAPIC hotplug support on top of the resources handling
rework (Jiang Liu, Yinghai Lu).
- ACPICA update to upstream release 20150204 including an interrupt
handling rework that allows drivers to install raw handlers for
ACPI GPEs which then become entirely responsible for the given GPE
and the ACPICA core code won't touch it (Lv Zheng, David E Box,
Octavian Purdila).
- ACPI EC driver rework to fix several concurrency issues and other
problems related to events handling on top of the ACPICA's new
support for raw GPE handlers (Lv Zheng).
- New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
Subsystem) driver for Intel chips (Ken Xue).
- Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko
Nikula).
- Two new blacklist entries for machines (Samsung 730U3E/740U3E and
510R) where the native backlight interface doesn't work correctly
while the ACPI one does (Hans de Goede).
- Rework of the ACPI processor driver's handling of idle states to
make the code more straightforward and less bloated overall (Rafael
J Wysocki).
- Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei
Bai).
- PCI core power management modification to avoid resuming (some)
runtime-suspended devices during system suspend if they are in the
right states already (Rafael J Wysocki).
- New SFI-based cpufreq driver for Intel platforms using SFI
(Srinidhi Kasagar).
- cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
Doug Anderson, Wolfram Sang).
- SkyLake CPU support and other updates for the intel_pstate driver
(Kristen Carlson Accardi, Srinivas Pandruvada).
- cpufreq-dt driver cleanup (Markus Elfring).
- Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
- Generic power domains core code fixes and cleanups (Ulf Hansson).
- Operating Performance Points (OPP) core code cleanups and kernel
documentation update (Nishanth Menon).
- New dabugfs interface to make the list of PM QoS constraints
available to user space (Nishanth Menon).
- New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
- New devfreq class (devfreq_event) to provide raw utilization data
to devfreq governors (Chanwoo Choi).
- Assorted minor fixes and cleanups related to power management
(Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel
Machek, Todd E Brandt, Wonhong Kwon).
- turbostat updates (Len Brown) and cpupower Makefile improvement
(Sriram Raghunathan)"
* tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits)
tools/power turbostat: relax dependency on APERF_MSR
tools/power turbostat: relax dependency on invariant TSC
Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
tools/power turbostat: relax dependency on root permission
ACPI / video: Add disable_native_backlight quirk for Samsung 510R
ACPI / PM: Remove unneeded nested #ifdef
USB / PM: Remove unneeded #ifdef and associated dead code
intel_pstate: provide option to only use intel_pstate with HWP
ACPI / EC: Add GPE reference counting debugging messages
ACPI / EC: Add query flushing support
ACPI / EC: Refine command storm prevention support
ACPI / EC: Add command flushing support.
ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag
ACPI: add AMD ACPI2Platform device support for x86 system
ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse()
ACPI / EC: Update revision due to raw handler mode.
ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp.
ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode.
ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model
...
|
||
|
Rafael J. Wysocki
|
2f8c42f31c |
Merge branches 'pm-pci' and 'pm-cpuidle'
* pm-pci: PCI / PM: Avoid resuming PCI devices during system suspend * pm-cpuidle: drivers: cpuidle: Don't initialize big.LITTLE driver if MCPM is unavailable |
||
|
Bjorn Helgaas
|
341f3a2bcf |
Merge branches 'pci/enumeration', 'pci/hotplug', 'pci/resource' and 'pci/virtualization' into next
* pci/enumeration: PCI: Generate uppercase hex for modalias var in uevent * pci/hotplug: PCI: pciehp: Handle surprise add even if surprise removal isn't supported * pci/resource: PCI: Fix infinite loop with ROM image of size 0 * pci/virtualization: PCI: Add Wellsburg (X99) to Intel PCH root port ACS quirk PCI: Add DMA alias quirk for Adaptec 3405 PCI: Add ACS quirk for Emulex NICs PCI: Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transition PCI: Add flag for devices that don't reset on D3hot->D0 transition PCI: Mark Atheros AR93xx to avoid bus reset PCI: Add flag for devices where we can't use bus reset |
||
|
Rafael J. Wysocki
|
bac2a909a0 |
PCI / PM: Avoid resuming PCI devices during system suspend
Commit |
||
|
Alex Williamson
|
51e5373879 |
PCI: Add flag for devices that don't reset on D3hot->D0 transition
Per the PCI Power Management spec r1.2, sec 3.2.4, a device that advertises No_Soft_Reset == 0 in the PMCSR register (reported by lspci as "NoSoftRst-") should perform an internal reset when transitioning from D3hot to D0 via software control. Configuration context is lost and the device requires a full reinitialization sequence. Unfortunately the definition of "internal reset", beyond the application of the configuration context, is largely left to the interpretation of the specific device. Some devices don't seem to perform an "internal reset" even if they report No_Soft_Reset == 0. We still need to honor the PCI specification and restore PCI config context in the event that we do a PM reset, so we don't cache and modify the PCI_PM_CTRL_NO_SOFT_RESET bit for the device, but for interfaces where the intention is to reset the device, like pci_reset_function(), we need a mechanism to flag that PM reset (a D3hot->D0 transition) doesn't perform any significant "internal reset" of the device. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Alex Williamson
|
f331a859e0 |
PCI: Add flag for devices where we can't use bus reset
Enable a mechanism for devices to quirk that they do not behave when doing a PCI bus reset. We require a modest level of spec compliant behavior in order to do a reset, for instance the device should come out of reset without throwing errors and PCI config space should be accessible after reset. This is too much to ask for some devices. Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.14+ |
||
|
Lorenzo Pieralisi
|
7c67470009 |
PCI: Move domain assignment from arm64 to generic code
The current logic in arm64 pci_bus_assign_domain_nr() is flawed in that depending on the host controller configuration for a platform and the initialization sequence, core code may end up allocating PCI domain numbers from both DT and the generic domain counter, which would result in PCI domain allocation aliases/errors. Fix the logic behind the PCI domain number assignment and move the resulting code to the PCI core so the same domain allocation logic is used on all platforms that select CONFIG_PCI_DOMAINS_GENERIC. [bhelgaas: tidy changelog] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> CC: Rob Herring <robh+dt@kernel.org> CC: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Linus Torvalds
|
9d050966e2 |
xen: features and fixes for 3.19-rc0
- Fully support non-coherent devices on ARM by introducing the mechanisms to request the hypervisor to perform the required cache maintainance operations. - A number of pciback bug fixes and cleanups. Notably a deadlock fix if a PCI device was manually uunbound and a fix for incorrectly restoring state after a function reset. - In x86 PVHVM guests, use the APIC for interrupts if this has been virtualized by the hardware. This reduces the number of interrupt- related VM exits on such hardware. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQEcBAABAgAGBQJUiYb+AAoJEFxbo/MsZsTRwmEH+gNaJz5r8gIJlq8Q51+nOIs4 Gw6HdjUB5MOT47vDV4treEOx0Bk8hYTfgWUWvAC81JMJ1sMWOVrUGuG/0lmzaomW zXvSk+o0n4LafwEhHb8LIccZMbaH7f9o3PNdNchrTkPrIl8Gf2nmBXCkDsT4mRye 5ZFpc4ntgBrznh3baPYDS8PCAmlyZ0uVEnz1ofYI6S80dC13siEiPG0c9TrNEKzO glhvgCRmR0C4ZNLblM36HWBEqrdLuGCoNJSH+7okygyP2TLD3aO4R+9aD5JWYNdf fO2WmivX/zK+UGVAElrLx+rb8R2dv3ddeaE5piZhIBUieopIWJd32L3LhQORdtc= =N6DP -----END PGP SIGNATURE----- Merge tag 'stable/for-linus-3.19-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen features and fixes from David Vrabel: - Fully support non-coherent devices on ARM by introducing the mechanisms to request the hypervisor to perform the required cache maintainance operations. - A number of pciback bug fixes and cleanups. Notably a deadlock fix if a PCI device was manually uunbound and a fix for incorrectly restoring state after a function reset. - In x86 PVHVM guests, use the APIC for interrupts if this has been virtualized by the hardware. This reduces the number of interrupt- related VM exits on such hardware. * tag 'stable/for-linus-3.19-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (26 commits) Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single" xen/pci: Use APIC directly when APIC virtualization hardware is available xen/pci: Defer initialization of MSI ops on HVM guests xen-pciback: drop SR-IOV VFs when PF driver unloads xen/pciback: Restore configuration space when detaching from a guest. PCI: Expose pci_load_saved_state for public consumption. xen/pciback: Remove tons of dereferences xen/pciback: Print out the domain owning the device. xen/pciback: Include the domain id if removing the device whilst still in use driver core: Provide an wrapper around the mutex to do lockdep warnings xen/pciback: Don't deadlock when unbinding. swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single swiotlb-xen: call xen_dma_sync_single_for_device when appropriate swiotlb-xen: remove BUG_ON in xen_bus_to_phys swiotlb-xen: pass dev_addr to xen_dma_unmap_page and xen_dma_sync_single_for_cpu xen/arm: introduce GNTTABOP_cache_flush xen/arm/arm64: introduce xen_arch_need_swiotlb xen/arm/arm64: merge xen/mm32.c into xen/mm.c xen/arm: use hypercall to flush caches in map_page xen: add a dma_addr_t dev_addr argument to xen_dma_map_page ... |
||
|
Konrad Rzeszutek Wilk
|
98d9b27125 |
PCI: Expose pci_load_saved_state for public consumption.
We have the pci_load_and_free_saved_state, and pci_store_saved_state but are missing the functionality to just load the state multiple times in the PCI device without having to free/save the state. This patch makes it possible to use this function. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> |