Pull more input fixes from Dmitry Torokhov:
"A couple of fixes in driver teardown paths and another ID for
Synaptics RMI mode"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation
Input: synaptics-rmi4 - destroy F54 poller workqueue when removing
Input: ff-memless - kill timer in destroy()
PageAnon() and PageKsm() use the low two bits of the page->mapping
pointer to indicate the page type. PageAnon() only checks the LSB while
PageKsm() checks the least significant 2 bits are equal to 3.
Therefore, PageAnon() is true for KSM pages. __dump_page() incorrectly
will never print "ksm" because it checks PageAnon() first. Fix this by
checking PageKsm() first.
Link: http://lkml.kernel.org/r/20191113000651.20677-1-rcampbell@nvidia.com
Fixes: 1c6fb1d89e ("mm: print more information about mapping in __dump_page")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When dumping struct page information, __dump_page() prints the page type
with a trailing blank followed by the page flags on a separate line:
anon
flags: 0x100000000090034(uptodate|lru|active|head|swapbacked)
It looks like the intent was to use pr_cont() for printing "flags:" but
pr_cont() usage is discouraged so fix this by extending the format to
include the flags into a single line:
anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked)
If the page is file backed, the name might be long so use two lines:
shmem_aops name:"dev/zero"
flags: 0x10000000008000c(uptodate|dirty|swapbacked)
Eliminate pr_conf() usage as well for appending compound_mapcount.
Link: http://lkml.kernel.org/r/20191112012608.16926-1-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following race is observed due to which a processes faulting on a
swap entry, finds the page neither in swapcache nor swap. This causes
zram to give a zero filled page that gets mapped to the process,
resulting in a user space crash later.
Consider parent and child processes Pa and Pb sharing the same swap slot
with swap_count 2. Swap is on zram with SWP_SYNCHRONOUS_IO set.
Virtual address 'VA' of Pa and Pb points to the shared swap entry.
Pa Pb
fault on VA fault on VA
do_swap_page do_swap_page
lookup_swap_cache fails lookup_swap_cache fails
Pb scheduled out
swapin_readahead (deletes zram entry)
swap_free (makes swap_count 1)
Pb scheduled in
swap_readpage (swap_count == 1)
Takes SWP_SYNCHRONOUS_IO path
zram enrty absent
zram gives a zero filled page
Fix this by making sure that swap slot is freed only when swap count
drops down to one.
Link: http://lkml.kernel.org/r/1571743294-14285-1-git-send-email-vinmenon@codeaurora.org
Fixes: aa8d22a11d ("mm: swap: SWP_SYNCHRONOUS_IO: skip swapcache only if swapped page has no other reference")
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Suggested-by: Minchan Kim <minchan@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
try_offline_node() is pretty much broken right now:
- The node span is updated when onlining memory, not when adding it. We
ignore memory that was mever onlined. Bad.
- We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily
trigger a kernel panic. Bad for memory that is offline but also bad
for subsection hotadd with ZONE_DEVICE, whereby the memmap of the
first PFN of a section might contain garbage.
- Sections belonging to mixed nodes are not properly considered.
As memory blocks might belong to multiple nodes, we would have to walk
all pageblocks (or at least subsections) within present sections.
However, we don't have a way to identify whether a memmap that is not
online was initialized (relevant for ZONE_DEVICE). This makes things
more complicated.
Luckily, we can piggy pack on the node span and the nid stored in memory
blocks. Currently, the node span is grown when calling
move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when
removing memory, before calling try_offline_node(). Sysfs links are
created via link_mem_sections(), e.g., during boot or when adding
memory.
If the node still spans memory or if any memory block belongs to the
nid, we don't set the node offline. As memory blocks that span multiple
nodes cannot get offlined, the nid stored in memory blocks is reliable
enough (for such online memory blocks, the node still spans the memory).
Introduce for_each_memory_block() to efficiently walk all memory blocks.
Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span
when removing ZONE_DEVICE memory to fix similar issues (access of
garbage memmaps) - until we have a reliable way to identify whether
these memmaps were properly initialized. This implies later, that once
a node had ZONE_DEVICE memory, we won't be able to set a node offline -
which should be acceptable.
Since commit f1dd2cd13c ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") memory that is added is not
assoziated with a zone/node (memmap not initialized). The introducing
commit 60a5a19e74 ("memory-hotplug: remove sysfs file of node")
already missed that we could have multiple nodes for a section and that
the zone/node span is updated when onlining pages, not when adding them.
I tested this by hotplugging two DIMMs to a memory-less and cpu-less
NUMA node. The node is properly onlined when adding the DIMMs. When
removing the DIMMs, the node is properly offlined.
Masayoshi Mizuma reported:
: Without this patch, memory hotplug fails as panic:
:
: BUG: kernel NULL pointer dereference, address: 0000000000000000
: ...
: Call Trace:
: remove_memory_block_devices+0x81/0xc0
: try_remove_memory+0xb4/0x130
: __remove_memory+0xa/0x20
: acpi_memory_device_remove+0x84/0x100
: acpi_bus_trim+0x57/0x90
: acpi_bus_trim+0x2e/0x90
: acpi_device_hotplug+0x2b2/0x4d0
: acpi_hotplug_work_fn+0x1a/0x30
: process_one_work+0x171/0x380
: worker_thread+0x49/0x3f0
: kthread+0xf8/0x130
: ret_from_fork+0x35/0x40
[david@redhat.com: v3]
Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com
Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com
Fixes: 60a5a19e74 ("memory-hotplug: remove sysfs file of node")
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e86b
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In collapse_file(), for !is_shmem case, current check cannot guarantee
the locked page is up-to-date. Specifically, xas_unlock_irq() should
not be called before lock_page() and get_page(); and it is necessary to
recheck PageUptodate() after locking the page.
With this bug and CONFIG_READ_ONLY_THP_FOR_FS=y, madvise(HUGE)'ed .text
may contain corrupted data. This is because khugepaged mistakenly
collapses some not up-to-date sub pages into a huge page, and assumes
the huge page is up-to-date. This will NOT corrupt data in the disk,
because the page is read-only and never written back. Fix this by
properly checking PageUptodate() after locking the page. This check
replaces "VM_BUG_ON_PAGE(!PageUptodate(page), page);".
Also, move PageDirty() check after locking the page. Current khugepaged
should not try to collapse dirty file THP, because it is limited to
read-only .text. The only case we hit a dirty page here is when the
page hasn't been written since write. Bail out and retry when this
happens.
syzbot reported bug on previous version of this patch.
Link: http://lkml.kernel.org/r/20191106060930.2571389-2-songliubraving@fb.com
Fixes: 99cb0dbd47 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: syzbot+efb9e48b9fbdc49bb34a@syzkaller.appspotmail.com
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1b7e816fc8 ("mm: slub: Fix slab walking for init_on_free")
fixed one problem with the slab walking but missed a key detail: When
walking the list, the head and tail pointers need to be updated since we
end up reversing the list as a result. Without doing this, bulk free is
broken.
One way this is exposed is a NULL pointer with slub_debug=F:
=============================================================================
BUG skbuff_head_cache (Tainted: G T): Object already free
-----------------------------------------------------------------------------
INFO: Slab 0x000000000d2d2f8f objects=16 used=3 fp=0x0000000064309071 flags=0x3fff00000000201
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:print_trailer+0x70/0x1d5
Call Trace:
<IRQ>
free_debug_processing.cold.37+0xc9/0x149
__slab_free+0x22a/0x3d0
kmem_cache_free_bulk+0x415/0x420
__kfree_skb_flush+0x30/0x40
net_rx_action+0x2dd/0x480
__do_softirq+0xf0/0x246
irq_exit+0x93/0xb0
do_IRQ+0xa0/0x110
common_interrupt+0xf/0xf
</IRQ>
Given we're now almost identical to the existing debugging code which
correctly walks the list, combine with that.
Link: https://lkml.kernel.org/r/20191104170303.GA50361@gandi.net
Link: http://lkml.kernel.org/r/20191106222208.26815-1-labbott@redhat.com
Fixes: 1b7e816fc8 ("mm: slub: Fix slab walking for init_on_free")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reported-by: Thibaut Sautereau <thibaut.sautereau@clip-os.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <clipos@ssi.gouv.fr>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An exiting task might belong to an offline cgroup. In this case an
attempt to grab a cgroup reference from the task can end up with an
infinite loop in hugetlb_cgroup_charge_cgroup(), because neither the
cgroup will become online, neither the task will be migrated to a live
cgroup.
Fix this by switching over to css_tryget(). As css_tryget_online()
can't guarantee that the cgroup won't go offline, in most cases the
check doesn't make sense. In this particular case users of
hugetlb_cgroup_charge_cgroup() are not affected by this change.
A similar problem is described by commit 18fa84a2db ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Link: http://lkml.kernel.org/r/20191106225131.3543616-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've encountered a rcu stall in get_mem_cgroup_from_mm():
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 33-....: (21000 ticks this GP) idle=6c6/1/0x4000000000000002 softirq=35441/35441 fqs=5017
(t=21031 jiffies g=324821 q=95837) NMI backtrace for cpu 33
<...>
RIP: 0010:get_mem_cgroup_from_mm+0x2f/0x90
<...>
__memcg_kmem_charge+0x55/0x140
__alloc_pages_nodemask+0x267/0x320
pipe_write+0x1ad/0x400
new_sync_write+0x127/0x1c0
__kernel_write+0x4f/0xf0
dump_emit+0x91/0xc0
writenote+0xa0/0xc0
elf_core_dump+0x11af/0x1430
do_coredump+0xc65/0xee0
get_signal+0x132/0x7c0
do_signal+0x36/0x640
exit_to_usermode_loop+0x61/0xd0
do_syscall_64+0xd4/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The problem is caused by an exiting task which is associated with an
offline memcg. We're iterating over and over in the do {} while
(!css_tryget_online()) loop, but obviously the memcg won't become online
and the exiting task won't be migrated to a live memcg.
Let's fix it by switching from css_tryget_online() to css_tryget().
As css_tryget_online() cannot guarantee that the memcg won't go offline,
the check is usually useless, except some rare cases when for example it
determines if something should be presented to a user.
A similar problem is described by commit 18fa84a2db ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Johannes:
: The bug aside, it doesn't matter whether the cgroup is online for the
: callers. It used to matter when offlining needed to evacuate all charges
: from the memcg, and so needed to prevent new ones from showing up, but we
: don't care now.
Link: http://lkml.kernel.org/r/20191106225131.3543616-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeeb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
s->dict.allocated was initialized to 0 but never set after a successful
allocation, thus the code always thought that the dictionary buffer has
to be reallocated.
Link: http://lkml.kernel.org/r/20191104185107.3b6330df@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reported-by: Yu Sun <yusun2@cisco.com>
Acked-by: Daniel Walker <danielwa@cisco.com>
Cc: "Yixia Si (yisi)" <yisi@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recently, I hit the following issue when running upstream.
kernel BUG at mm/vmscan.c:1521!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 23385 Comm: syz-executor.6 Not tainted 5.4.0-rc4+ #1
RIP: 0010:shrink_page_list+0x12b6/0x3530 mm/vmscan.c:1521
Call Trace:
reclaim_pages+0x499/0x800 mm/vmscan.c:2188
madvise_cold_or_pageout_pte_range+0x58a/0x710 mm/madvise.c:453
walk_pmd_range mm/pagewalk.c:53 [inline]
walk_pud_range mm/pagewalk.c:112 [inline]
walk_p4d_range mm/pagewalk.c:139 [inline]
walk_pgd_range mm/pagewalk.c:166 [inline]
__walk_page_range+0x45a/0xc20 mm/pagewalk.c:261
walk_page_range+0x179/0x310 mm/pagewalk.c:349
madvise_pageout_page_range mm/madvise.c:506 [inline]
madvise_pageout+0x1f0/0x330 mm/madvise.c:542
madvise_vma mm/madvise.c:931 [inline]
__do_sys_madvise+0x7d2/0x1600 mm/madvise.c:1113
do_syscall_64+0x9f/0x4c0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
madvise_pageout() accesses the specified range of the vma and isolates
them, then runs shrink_page_list() to reclaim its memory. But it also
isolates the unevictable pages to reclaim. Hence, we can catch the
cases in shrink_page_list().
The root cause is that we scan the page tables instead of specific LRU
list. and so we need to filter out the unevictable lru pages from our
end.
Link: http://lkml.kernel.org/r/1572616245-18946-1-git-send-email-zhongjiang@huawei.com
Fixes: 1a4e58cce8 ("mm: introduce MADV_PAGEOUT")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit d883544515 ("mm: mempolicy: make the behavior consistent when
MPOL_MF_MOVE* and MPOL_MF_STRICT were specified") fixed the return value
of mbind() for a couple of corner cases. But, it altered the errno for
some other cases, for example, mbind() should return -EFAULT when part
or all of the memory range specified by nodemask and maxnode points
outside your accessible address space, or there was an unmapped hole in
the specified memory range specified by addr and len.
Fix this by preserving the errno returned by queue_pages_range(). And,
the pagelist may be not empty even though queue_pages_range() returns
error, put the pages back to LRU since mbind_range() is not called to
really apply the policy so those pages should not be migrated, this is
also the old behavior before the problematic commit.
Link: http://lkml.kernel.org/r/1572454731-3925-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: d883544515 ("mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Li Xinhai <lixinhai.lxh@gmail.com>
Reviewed-by: Li Xinhai <lixinhai.lxh@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.19 and 5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just got one of these for debugging some unrelated issues, and noticed
that Lenovo seems to have gone back to using RMI4 over smbus with
Synaptics touchpads on some of their new systems, particularly this one.
So, let's enable RMI mode for the X1 Extreme 2nd Generation.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191115221814.31903-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3O/gkQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpsLBD/47jITnsOf/EU1gqW8vbl+psrPYQN+p68id
EA5L8fqF7wHg/Anxg9MApDO6noH8BvnfSGFnqxWoE5YcvT/mfj4pVciLMiNG2BwA
hUiJCwIG8SGCn2MRbaTQpqRnMw8aoTKdJAUWwjZTl/db+X9aCv++Odn4XuAABfh2
LxIb0ZZBF5M8CfKRHtksuCcGBftEUTrlCzSZ9dXI5tD8EpRNJw/5LDGB6w7inhcZ
0+X7ENdSQrMKA9ImJunLPUDFejHu4fr4qJdAX67Qai0Wf2dR54eaXmTVO4d4SGcU
UX0zpNC6bozCq+X/ICnlJkK+ECuR33xFLRIS0S7Xv2Er6n3Ul8N6cb6RRv8Q+o1h
XG5NfpOH+Atqmdyp9zSRI2c2UVfIfmvmRVIUFM+ZXmdw5oSfUltGLdyNVnKuhzc+
f2Y3dti96YnT35TIihKcwfqlFuaXfLfCmLYabtVylwlOJ80Sjhgea3IyvwstpJau
uIs5X8Z5AdBuqufPj4veS3x73DeE7slGmzADcNtUeFb1K5423MJqlQUOeVeJW3x3
85tS7aot/SoMnA1dtREvceerFP/lIa/02iqX0TYQ7BqsN5oZjQzaiuJkUfV2WNOs
3TlNRBKF69tpX4+NXxaSm5kC0YHtHIWF0EtNliKM7Yi8WS0tVsy74pDO7otj3j1m
s10Rr/1seA==
=wP5w
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191115' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should make it into this release. This contains:
- io_uring:
- The timeout command assumes sequence == 0 means that we want
one completion, but this kind of overloading is unfortunate as
it prevents users from doing a pure time based wait. Since
this operation was introduced in this cycle, let's correct it
now, while we can. (me)
- One-liner to fix an issue with dependent links and fixed
buffer reads. The actual IO completed fine, but the link got
severed since we stored the wrong expected value. (me)
- Add TIMEOUT to list of opcodes that don't need a file. (Pavel)
- rsxx missing workqueue destry calls. Old bug. (Chuhong)
- Fix blk-iocost active list check (Jiufei)
- Fix impossible-to-hit overflow merge condition, that still hit some
folks very rarely (Junichi)
- Fix bfq hang issue from 5.3. This didn't get marked for stable, but
will go into stable post this merge (Paolo)"
* tag 'for-linus-20191115' of git://git.kernel.dk/linux-block:
rsxx: add missed destroy_workqueue calls in remove
iocost: check active_list of all the ancestors in iocg_activate()
block, bfq: deschedule empty bfq_queues not referred by any process
io_uring: ensure registered buffer import returns the IO length
io_uring: Fix getting file for timeout
block: check bi_size overflow before merge
io_uring: make timeout sequence == 0 mean no sequence
We can't use "adap->dev" after it has been freed.
Fixes: 5bf4fa7dae ("i2c: break out OF support into separate file")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Many cheap devices use Silead touchscreen controllers. Testing has shown
repeatedly that these touchscreen controllers work fine at 400KHz, but for
unknown reasons do not work properly at 100KHz. This has been seen on
both ARM and x86 devices using totally different i2c controllers.
On some devices the ACPI tables list another device at the same I2C-bus
as only being capable of 100KHz, testing has shown that these other
devices work fine at 400KHz (as can be expected of any recent I2C hw).
This commit makes i2c_acpi_find_bus_speed() always return 400KHz if a
Silead touchscreen controller is present, fixing the touchscreen not
working on devices which ACPI tables' wrongly list another device on the
same bus as only being capable of 100KHz.
Specifically this fixes the touchscreen on the Jumper EZpad 6 m4 not
working.
Reported-by: youling 257 <youling257@gmail.com>
Tested-by: youling 257 <youling257@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: rewording warning a little]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Richard Cochran says:
====================
ptp: Validate the ancillary ioctl flags more carefully.
The flags passed to the ioctls for periodic output signals and
time stamping of external signals were never checked, and thus formed
a useless ABI inadvertently. More recently, a version 2 of the ioctls
was introduced in order make the flags meaningful. This series
tightens up the checks on the new ioctl flags.
- Patch 1 ensures at least one edge flag is set for the new ioctl.
- Patches 2-7 are Jacob's recent checks, picking up the tags.
- Patch 8 introduces a "strict" flag for passing to the drivers when the
new ioctl is used.
- Patches 9-12 implement the "strict" checking in the drivers.
- Patch 13 extends the test program to exercise combinations of flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Because each driver and hardware has different capabilities, the test
cannot provide a simple pass/fail result, but it can at least show what
combinations of flags are supported.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver enables rising edge or falling edge, but not both, and so
this patch validates that the request contains only one of the two
edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This hardware always time stamps rising and falling edges, and so this
patch validates that the request does contains both edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver enables rising edge or falling edge, but not both, and so
this patch validates that the request contains only one of the two
edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver enables rising edge or falling edge, but not both, and so
this patch validates that the request contains only one of the two
edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User space may request time stamps on rising edges, falling edges, or
both. However, the particular mode may or may not be supported in the
hardware or in the driver. This patch adds a "strict" flag that tells
drivers to ensure that the requested mode will be honored.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the renesas PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the mlx5 core PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
[ RC: I'm not 100% sure what this driver does, but if I'm not wrong it
follows the dp83640:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge
]
Cc: Feras Daoud <ferasda@mellanox.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the igb PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
This HW always time stamps both edges:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp both edges
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the dp83640 PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
For the record, the semantics of this driver are:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge
Cc: Stefan Sørensen <stefan.sorensen@spectralink.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the mv88e6xxx PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
For the record, the semantics of this driver are:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp rising edge
Cc: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 823eb2a3c4 ("PTP: add support for one-shot output") introduced
a new flag for the PTP periodic output request ioctl. This flag is not
currently supported by any driver.
Fix all drivers which implement the periodic output request ioctl to
explicitly reject any request with flags they do not understand. This
ensures that the driver does not accidentally misinterpret the
PTP_PEROUT_ONE_SHOT flag, or any new flag introduced in the future.
This is important for forward compatibility: if a new flag is
introduced, the driver should reject requests to enable the flag until
the driver has actually been modified to support the flag in question.
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Christopher Hall <christopher.s.hall@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 415606588c ("PTP: introduce new versions of IOCTLs")
introduced a new external time stamp ioctl that validates the flags.
This patch extends the validation to ensure that at least one rising
or falling edge flag is set when enabling external time stamps.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver calls release_resource in remove to match request_mem_region
in probe, which is incorrect.
Fix it by using the right one, release_mem_region.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a malicious device gives a short MAC it can elicit up to
5 bytes of leaked memory out of the driver. We need to check for
ETH_ALEN instead.
Reported-by: syzbot+a8d4acdad35e6bbca308@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw does not support VXLAN devices with a physical device attached and
vetoes such configurations upon enslavement to an offloaded bridge.
Commit 0ce1822c2a ("vxlan: add adjacent link to limit depth level")
changed the VXLAN device to be an upper of the physical device which
causes mlxsw to veto the creation of the VXLAN device with "Unknown
upper device type".
This is OK as this configuration is not supported, but it prevents us
from testing bad flows involving the enslavement of VXLAN devices with a
physical device to a bridge, regardless if the physical device is an
mlxsw netdev or not.
Adjust the test to use a dummy device as a physical device instead of a
mlxsw netdev.
Fixes: 0ce1822c2a ("vxlan: add adjacent link to limit depth level")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver forgets to destroy workqueue in remove() similarly to what is
done when probe() fails. Add a call to destroy_workqueue() to fix it.
Since unregistration will wait for the work to finish, we do not need to
cancel/flush the work instance in remove().
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191114023405.31477-1-hslester96@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
patch that went into -rc1 and a fixup for a bogus warning on older
gcc versions.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl3O2RMTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+k6CACf0hUTyWcJaiH3WAmkpKOnZVG//Ghv
+hDWskib0gSilW+mx8Cjsndb5rXVuE4MhZ9P1VD1MMhhfVlfTUspCPG6cIQ3B3gd
jEVLHDALaMc/tpKwa6EbxvxQRAL5D/2Umh8aK1kVMX2U9R6KKfMiRVToHVPewSkS
eM3HJuV0kUonnD6glHyie1iwI9iFkDgt+eTJR1hpiFx26y6TwVCH5RNNvZGr0Tcf
KMLgwAHxIowx0SxblvbJTMf1iIoPJNiUuZyBoo0Hli9hI7S/b4XfARAkD9eud02d
4shv7D9Js0V1tKDsfV/c8UpnOgBTGEY4AEXIN3Mm6Gk6q9pMnobWt+l8
=kIHR
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.4-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two fixes for the buffered reads and O_DIRECT writes serialization
patch that went into -rc1 and a fixup for a bogus warning on older gcc
versions"
* tag 'ceph-for-5.4-rc8' of git://github.com/ceph/ceph-client:
rbd: silence bogus uninitialized warning in rbd_object_map_update_finish()
ceph: increment/decrement dio counter on async requests
ceph: take the inode lock before acquiring cap refs
When a lookup is done, the afs filesystem will perform a bulk status-fetch
operation on the requested vnode (file) plus the next 49 other vnodes from
the directory list (in AFS, directory contents are downloaded as blobs and
parsed locally). When the results are received, it will speculatively
populate the inode cache from the extra data.
However, if the lookup races with another lookup on the same directory, but
for a different file - one that's in the 49 extra fetches, then if the bulk
status-fetch operation finishes first, it will try and update the inode
from the other lookup.
If this other inode is still in the throes of being created, however, this
will cause an assertion failure in afs_apply_status():
BUG_ON(test_bit(AFS_VNODE_UNSET, &vnode->flags));
on or about fs/afs/inode.c:175 because it expects data to be there already
that it can compare to.
Fix this by skipping the update if the inode is being created as the
creator will presumably set up the inode with the same information.
Fixes: 39db9815da ("afs: Fix application of the results of a inline bulk status fetch")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Handle CC variables containing quotes in tools-support-relr.sh script
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl3OiRAACgkQt6xw3ITB
YzQMhwgAgZl+QQPLhEMLQHvqaDtLb3l08vPPrLCDWHon5IaHMz1HCGB+/5CMaCG5
9X9tEiy2xg5X9aHSyI7T7qmjqUGkXTKn1OzeSNxHJh8IUsvFN30UKm2lEewoRq1V
WR8HfC/h1Ff+b2502/gg96KZxWBnzbN2XmZ3cEtLCHsj8OrRq6mFeqMxgnD8xE3D
DceJ3v48ziYV2LUOM8/ZLJ8CzwWcSiNYIqJghjgbC2q83+czxne6KRGwx/4muWaX
OpMa5tvbeVirMOThr3BGpuDe/JTkygVXFfw7jS/mNbV6ALwf9E8neinnoTFNp7Tq
7tpBkRHxB3vB6tLnnBJIjNfl1KbaJA==
=YqcT
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"One trivial fix for -rc8/final that ensures that the script used to
detect RELR relocation support in the toolchain works correctly when
$CC contains quotes. Although it fails safely (by failing to detect
the support when it exists), it would be nice to have this fixed in
5.4 given that it was only introduced in the last merge window.
Summary:
- Handle CC variables containing quotes in tools-support-relr.sh
script"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
scripts/tools-support-relr.sh: un-quote variables
MAINTAINERS update for Broadcom MIPS systems.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXc4wwBYccGF1bGJ1cnRv
bkBrZXJuZWwub3JnAAoJED6nn6y1dQDdgA4BAPUIK91zzLqrG5krdu5Df/UDM3EN
XlhhDTX8tT7QHvufAP9Uyn9FkbCIPmupBp+6s7Q6OvHGyG8TYRxTehyMtdLiBA==
=McJE
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.4_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A fix and simplification for SGI IP27 exception handlers, and a small
MAINTAINERS update for Broadcom MIPS systems"
* tag 'mips_fixes_5.4_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MAINTAINERS: Remove Kevin as maintainer of BMIPS generic platforms
MIPS: SGI-IP27: fix exception handler replication
* Two updates to the IFU erratum
* selftests build fix
* Brown paper bag fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdzm9YAAoJEL/70l94x66DUWAIAKODbb0j7IB9RHD3lOJI9evz
m/+ajirYug2/vv78IkCo02sVssuHqUvqes60AlUGz7ZzGzVdwbSJ9dsu+e9ylq7M
ZJIySe1R31R9qKbjoszKmL8/Dc8oe4pCHvwPsVDLNHFMmgb7nbaBrQ7SnPK8iwas
N2ljMiq8gTRYmEmF7VOw2SZqm8BebjhxjfN8RVTOvDDkMozD15djw7mQ1BH0aISs
rFt8NH8qXhgbdHXMyQUnQrNySMeH5igrrPLFESOshjIcVq67gUKW6pMdDc+uIVM7
9SLqa8mY4PfuHaYAaljZ7PKs3EkcUt5Si0arP7gF+Y0WIObALlUMr2tNDeClBmY=
=VE3v
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM fixes from Paolo Bonzini:
- fixes for CONFIG_KVM_COMPAT=n
- two updates to the IFU erratum
- selftests build fix
- brown paper bag fix
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Add a comment describing the /dev/kvm no_compat handling
KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast()
KVM: Forbid /dev/kvm being opened by a compat task when CONFIG_KVM_COMPAT=n
KVM: X86: Reset the three MSR list number variables to 0 in kvm_init_msr_list()
selftests: kvm: fix build with glibc >= 2.30
kvm: x86: disable shattered huge page recovery for PREEMPT_RT.
A few small last-minute fixes for USB-audio and HD-audio as well
as for PCM core:
- A race fix for PCM core between stopping and closing a stream
- USB-audio regressions in the recent descriptor validation code
and relevant changes
- A read of uninitialized value in USB-audio spotted by fuzzer
- A fix for USB-audio race at stopping a stream
- Intel HD-audio platform fixes
-----BEGIN PGP SIGNATURE-----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=Xx2C
-----END PGP SIGNATURE-----
Merge tag 'sound-5.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few small last-minute fixes for USB-audio and HD-audio as well as
for PCM core:
- A race fix for PCM core between stopping and closing a stream
- USB-audio regressions in the recent descriptor validation code and
relevant changes
- A read of uninitialized value in USB-audio spotted by fuzzer
- A fix for USB-audio race at stopping a stream
- Intel HD-audio platform fixes"
* tag 'sound-5.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix incorrect size check for processing/extension units
ALSA: usb-audio: Fix incorrect NULL check in create_yamaha_midi_quirk()
ALSA: pcm: Fix stream lock usage in snd_pcm_period_elapsed()
ALSA: usb-audio: not submit urb for stopped endpoint
ALSA: hda: hdmi - fix pin setup on Tigerlake
ALSA: hda: Add Cometlake-S PCI ID
ALSA: usb-audio: Fix missing error check at mixer resolution test
i915:
- MOCS table fixes for EHL and TGL
- Update Display's rawclock on resume
- GVT's dmabuf reference drop fix
amdgpu:
- Fix a potential crash in firmware parsing
sun4i:
- One fix to the dotclock dividers range for sun4i
-----BEGIN PGP SIGNATURE-----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=RKpL
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-11-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Here is this weeks non-intel hw vuln fixes pull. Three drivers, all
small fixes.
i915:
- MOCS table fixes for EHL and TGL
- Update Display's rawclock on resume
- GVT's dmabuf reference drop fix
amdgpu:
- Fix a potential crash in firmware parsing
sun4i:
- One fix to the dotclock dividers range for sun4i"
* tag 'drm-fixes-2019-11-15' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: fix null pointer deref in firmware header printing
drm/i915/tgl: MOCS table update
Revert "drm/i915/ehl: Update MOCS table for EHL"
drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.
drm/i915: update rawclk also on resume
drm/i915/gvt: fix dropping obj reference twice
Pull misc vfs fixes from Al Viro:
"Assorted fixes all over the place; some of that is -stable fodder,
some regressions from the last window"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
ecryptfs: fix unlink and rmdir in face of underlying fs modifications
audit_get_nd(): don't unlock parent too early
exportfs_decode_fh(): negative pinned may become positive without the parent locked
cgroup: don't put ERR_PTR() into fc->root
autofs: fix a leak in autofs_expire_indirect()
aio: Fix io_pgetevents() struct __compat_aio_sigset layout
fs/namespace.c: fix use-after-free of mount in mnt_warn_timestamp_expiry()
uclamp_update_active() should perform the update when
p->uclamp[clamp_id].active is true. But when the logic was inverted in
[1], the if condition wasn't inverted correctly too.
[1] https://lore.kernel.org/lkml/20190902073836.GO2369@hirez.programming.kicks-ass.net/
Reported-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: babbe170e0 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Link: https://lkml.kernel.org/r/20191114211052.15116-1-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a comment explaining the rational behind having both
no_compat open and ioctl callbacks to fend off compat tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Huazhong Tan says:
====================
net: hns3: fixes for -net
This series includes misc fixes for the HNS3 ethernet driver.
[patch 1/3] adds a compatible handling for configuration of
MAC VLAN swithch parameter.
[patch 2/3] re-allocates SSU buffer when pfc_en changed.
[patch 3/3] fixes a bug for ETS bandwidth validation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some device only support 4 TCs, but the driver check the total
bandwidth of 8 TCs, so may cause wrong configurations write to
the hw.
This patch uses hdev->tc_max to instead HNAE3_MAX_TC to fix it.
Fixes: e432abfb99 ("net: hns3: add common validation in hclge_dcb")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a TC's PFC is disabled or enabled, the RX private buffer for
this TC need to be changed too, otherwise this may cause packet
dropped problem.
This patch fixes it by calling hclge_buffer_alloc to reallocate
buffer when pfc_en changes.
Fixes: cacde272dd ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, hns3 driver just directly send specific setting bit
and mask bits of MAC VLAN switch parameter to the firmware, it
can not be compatible with the old firmware, because the old one
ignores mask bits and covers all bits with new setting bits.
So when running with old firmware, the communication between PF
and VF will fail after resetting or configuring spoof check, since
they will do the MAC VLAN switch parameter configuration.
This patch fixes this problem by reading switch parameter firstly,
then just modifies the corresponding bit and sends it to firmware.
Fixes: dd2956eab1 ("net: hns3: not allow SSU loopback while execute ethtool -t dev")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
