This patch removes the use of likely and unlikely in xsk.h since they
create a dependency on Linux headers as reported by several
users. There have also been reports that the use of these decreases
performance as the compiler puts the code on two different cache lines
instead of on a single one. All in all, I think we are better off
without them.
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ring buffer code of XDP sockets is missing a memory barrier on the
consumer side between the load of the data and the write that signals
that it is ok for the producer to put new data into the buffer. On
architectures that does not guarantee that stores are not reordered
with older loads, the producer might put data into the ring before the
consumer had the chance to read it. As IA does guarantee this
ordering, it would only need a compiler barrier here, but there are no
primitives in barrier.h for this specific case (hinder writes to be ordered
before older reads) so I had to add a smp_mb() here which will
translate into a run-time synch operation on IA.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Using %ld for printing out value of ptrdiff_t type is not portable
between 32-bit and 64-bit archs. This is causing compilation errors for
libbpf on 32-bit platform (discovered as part of an effort to integrate
libbpf into systemd ([0])). Proper formatter is %td, which is used in
this patch.
v2->v1:
- add Reported-by
- provide more context on how this issue was discovered
[0] https://github.com/systemd/systemd/pull/12151
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds support for VAR and DATASEC in btf_dedup(). VAR/DATASEC
are never deduplicated, but they need to be processed anyway as types
they refer to might need to be remapped due to deduplication and
compaction.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yonghong Song <yhs@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Support BPF_PROG_TYPE_CGROUP_SYSCTL program in libbpf: identifying
program and attach types by section name, probe.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-04-12
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Improve BPF verifier scalability for large programs through two
optimizations: i) remove verifier states that are not useful in pruning,
ii) stop walking parentage chain once first LIVE_READ is seen. Combined
gives approx 20x speedup. Increase limits for accepting large programs
under root, and add various stress tests, from Alexei.
2) Implement global data support in BPF. This enables static global variables
for .data, .rodata and .bss sections to be properly handled which allows
for more natural program development. This also opens up the possibility
to optimize program workflow by compiling ELFs only once and later only
rewriting section data before reload, from Daniel and with test cases and
libbpf refactoring from Joe.
3) Add config option to generate BTF type info for vmlinux as part of the
kernel build process. DWARF debug info is converted via pahole to BTF.
Latter relies on libbpf and makes use of BTF deduplication algorithm which
results in 100x savings compared to DWARF data. Resulting .BTF section is
typically about 2MB in size, from Andrii.
4) Add BPF verifier support for stack access with variable offset from
helpers and add various test cases along with it, from Andrey.
5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header
so that L2 encapsulation can be used for tc tunnels, from Alan.
6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that
users can define a subset of allowed __sk_buff fields that get fed into
the test program, from Stanislav.
7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up
various UBSAN warnings in bpftool, from Yonghong.
8) Generate a pkg-config file for libbpf, from Luca.
9) Dump program's BTF id in bpftool, from Prashant.
10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP
program, from Magnus.
11) kallsyms related fixes for the case when symbols are not present in
BPF selftests and samples, from Daniel
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Support recently introduced input/output context for test runs.
We extend only bpf_prog_test_run_xattr. bpf_prog_test_run is
unextendable and left as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reported in [1].
With gcc 8.3.0 the following error is issued:
cc -Ibpf@sta -I. -I.. -I.././include -I.././include/uapi
-fdiagnostics-color=always -fsanitize=address,undefined -fno-omit-frame-pointer
-pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -g -fPIC -g -O2
-Werror -Wall -Wno-pointer-arith -Wno-sign-compare -MD -MQ
'bpf@sta/src_libbpf.c.o' -MF 'bpf@sta/src_libbpf.c.o.d' -o
'bpf@sta/src_libbpf.c.o' -c ../src/libbpf.c
../src/libbpf.c: In function 'bpf_object__elf_collect':
../src/libbpf.c:947:18: error: 'map_def_sz' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
if (map_def_sz <= sizeof(struct bpf_map_def)) {
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/libbpf.c:827:18: note: 'map_def_sz' was declared here
int i, map_idx, map_def_sz, nr_syms, nr_maps = 0, nr_maps_glob = 0;
^~~~~~~~~~
According to [2] -Wmaybe-uninitialized is enabled by -Wall.
Same error is generated by clang's -Wconditional-uninitialized.
[1] https://github.com/libbpf/libbpf/pull/29#issuecomment-481902601
[2] https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
Fixes: d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In commit da11b41758 ("libbpf: teach libbpf about log_level bit 2"),
the BPF_LOG_BUF_SIZE was increased to 16M. The XDP socket part of
libbpf allocated the log_buf on the stack, but for the new 16M buffer
size this is not going to work. Change the code so it uses a 16K buffer
instead.
Fixes: da11b41758 ("libbpf: teach libbpf about log_level bit 2")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The issue is reported at https://github.com/libbpf/libbpf/issues/28.
Basically, per C standard, for
void *memcpy(void *dest, const void *src, size_t n)
if "dest" or "src" is NULL, regardless of whether "n" is 0 or not,
the result of memcpy is undefined. clang ubsan reported three such
instances in bpf.c with the following pattern:
memcpy(dest, 0, 0).
Although in practice, no known compiler will cause issues when
copy size is 0. Let us still fix the issue to silence ubsan
warnings.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds libbpf support for BTF Var and DataSec kinds. Main point
here is that libbpf needs to do some preparatory work before the
whole BTF object can be loaded into the kernel, that is, fixing up
of DataSec size taken from the ELF section size and non-static
variable offset which needs to be taken from the ELF's string section.
Upstream LLVM doesn't fix these up since at time of BTF emission
it is too early in the compilation process thus this information
isn't available yet, hence loader needs to take care of it.
Note, deduplication handling has not been in the scope of this work
and needs to be addressed in a future commit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://reviews.llvm.org/D59441
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work adds BPF loader support for global data sections
to libbpf. This allows to write BPF programs in more natural
C-like way by being able to define global variables and const
data.
Back at LPC 2018 [0] we presented a first prototype which
implemented support for global data sections by extending BPF
syscall where union bpf_attr would get additional memory/size
pair for each section passed during prog load in order to later
add this base address into the ldimm64 instruction along with
the user provided offset when accessing a variable. Consensus
from LPC was that for proper upstream support, it would be
more desirable to use maps instead of bpf_attr extension as
this would allow for introspection of these sections as well
as potential live updates of their content. This work follows
this path by taking the following steps from loader side:
1) In bpf_object__elf_collect() step we pick up ".data",
".rodata", and ".bss" section information.
2) If present, in bpf_object__init_internal_map() we add
maps to the obj's map array that corresponds to each
of the present sections. Given section size and access
properties can differ, a single entry array map is
created with value size that is corresponding to the
ELF section size of .data, .bss or .rodata. These
internal maps are integrated into the normal map
handling of libbpf such that when user traverses all
obj maps, they can be differentiated from user-created
ones via bpf_map__is_internal(). In later steps when
we actually create these maps in the kernel via
bpf_object__create_maps(), then for .data and .rodata
sections their content is copied into the map through
bpf_map_update_elem(). For .bss this is not necessary
since array map is already zero-initialized by default.
Additionally, for .rodata the map is frozen as read-only
after setup, such that neither from program nor syscall
side writes would be possible.
3) In bpf_program__collect_reloc() step, we record the
corresponding map, insn index, and relocation type for
the global data.
4) And last but not least in the actual relocation step in
bpf_program__relocate(), we mark the ldimm64 instruction
with src_reg = BPF_PSEUDO_MAP_VALUE where in the first
imm field the map's file descriptor is stored as similarly
done as in BPF_PSEUDO_MAP_FD, and in the second imm field
(as ldimm64 is 2-insn wide) we store the access offset
into the section. Given these maps have only single element
ldimm64's off remains zero in both parts.
5) On kernel side, this special marked BPF_PSEUDO_MAP_VALUE
load will then store the actual target address in order
to have a 'map-lookup'-free access. That is, the actual
map value base address + offset. The destination register
in the verifier will then be marked as PTR_TO_MAP_VALUE,
containing the fixed offset as reg->off and backing BPF
map as reg->map_ptr. Meaning, it's treated as any other
normal map value from verification side, only with
efficient, direct value access instead of actual call to
map lookup helper as in the typical case.
Currently, only support for static global variables has been
added, and libbpf rejects non-static global variables from
loading. This can be lifted until we have proper semantics
for how BPF will treat multi-object BPF loads. From BTF side,
libbpf will set the value type id of the types corresponding
to the ".bss", ".data" and ".rodata" names which LLVM will
emit without the object name prefix. The key type will be
left as zero, thus making use of the key-less BTF option in
array maps.
Simple example dump of program using globals vars in each
section:
# bpftool prog
[...]
6784: sched_cls name load_static_dat tag a7e1291567277844 gpl
loaded_at 2019-03-11T15:39:34+0000 uid 0
xlated 1776B jited 993B memlock 4096B map_ids 2238,2237,2235,2236,2239,2240
# bpftool map show id 2237
2237: array name test_glo.bss flags 0x0
key 4B value 64B max_entries 1 memlock 4096B
# bpftool map show id 2235
2235: array name test_glo.data flags 0x0
key 4B value 64B max_entries 1 memlock 4096B
# bpftool map show id 2236
2236: array name test_glo.rodata flags 0x80
key 4B value 96B max_entries 1 memlock 4096B
# bpftool prog dump xlated id 6784
int load_static_data(struct __sk_buff * skb):
; int load_static_data(struct __sk_buff *skb)
0: (b7) r6 = 0
; test_reloc(number, 0, &num0);
1: (63) *(u32 *)(r10 -4) = r6
2: (bf) r2 = r10
; int load_static_data(struct __sk_buff *skb)
3: (07) r2 += -4
; test_reloc(number, 0, &num0);
4: (18) r1 = map[id:2238]
6: (18) r3 = map[id:2237][0]+0 <-- direct addr in .bss area
8: (b7) r4 = 0
9: (85) call array_map_update_elem#100464
10: (b7) r1 = 1
; test_reloc(number, 1, &num1);
[...]
; test_reloc(string, 2, str2);
120: (18) r8 = map[id:2237][0]+16 <-- same here at offset +16
122: (18) r1 = map[id:2239]
124: (18) r3 = map[id:2237][0]+16
126: (b7) r4 = 0
127: (85) call array_map_update_elem#100464
128: (b7) r1 = 120
; str1[5] = 'x';
129: (73) *(u8 *)(r9 +5) = r1
; test_reloc(string, 3, str1);
130: (b7) r1 = 3
131: (63) *(u32 *)(r10 -4) = r1
132: (b7) r9 = 3
133: (bf) r2 = r10
; int load_static_data(struct __sk_buff *skb)
134: (07) r2 += -4
; test_reloc(string, 3, str1);
135: (18) r1 = map[id:2239]
137: (18) r3 = map[id:2235][0]+16 <-- direct addr in .data area
139: (b7) r4 = 0
140: (85) call array_map_update_elem#100464
141: (b7) r1 = 111
; __builtin_memcpy(&str2[2], "hello", sizeof("hello"));
142: (73) *(u8 *)(r8 +6) = r1 <-- further access based on .bss data
143: (b7) r1 = 108
144: (73) *(u8 *)(r8 +5) = r1
[...]
For Cilium use-case in particular, this enables migrating configuration
constants from Cilium daemon's generated header defines into global
data sections such that expensive runtime recompilations with LLVM can
be avoided altogether. Instead, the ELF file becomes effectively a
"template", meaning, it is compiled only once (!) and the Cilium daemon
will then rewrite relevant configuration data from the ELF's .data or
.rodata sections directly instead of recompiling the program. The
updated ELF is then loaded into the kernel and atomically replaces
the existing program in the networking datapath. More info in [0].
Based upon recent fix in LLVM, commit c0db6b6bd444 ("[BPF] Don't fail
for static variables").
[0] LPC 2018, BPF track, "ELF relocation for static data in BPF",
http://vger.kernel.org/lpc-bpf2018.html#session-3
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust the code for relocations slightly with no functional changes,
so that upcoming patches that will introduce support for relocations
into the .data, .rodata and .bss sections can be added independent
of these changes.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
vsprintf() in __base_pr() uses nonliteral format string and it breaks
compilation for those who provide corresponding extra CFLAGS, e.g.:
https://github.com/libbpf/libbpf/issues/27
If libbpf is built with the flags from PR:
libbpf.c:68:26: error: format string is not a string literal
[-Werror,-Wformat-nonliteral]
return vfprintf(stderr, format, args);
^~~~~~
1 error generated.
Ignore this warning since the use case in libbpf.c is legit.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow bpf_prog_load_xattr() to specify log_level for program loading.
Teach libbpf to accept log_level with bit 2 set.
Increase default BPF_LOG_BUF_SIZE from 256k to 16M.
There is no downside to increase it to a maximum allowed by old kernels.
Existing 256k limit caused ENOSPC errors and users were not able to see
verifier error which is printed at the end of the verifier log.
If ENOSPC is hit, double the verifier log and try again to capture
the verifier error.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-03-29
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Bug fix in BTF deduplication that was mishandling an equivalence
comparison, from Andrii.
2) libbpf Makefile fixes to properly link against libelf for the shared
object and to actually export AF_XDP's xsk.h header, from Björn.
3) Fix use after free in bpf inode eviction, from Daniel.
4) Fix a bug in skb creation out of cpumap redirect, from Jesper.
5) Remove an unnecessary and triggerable WARN_ONCE() in max number
of call stack frames checking in verifier, from Paul.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Generate a libbpf.pc file at build time so that users can rely
on pkg-config to find the library, its CFLAGS and LDFLAGS.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The DPDK project is moving forward with its AF_XDP PMD, and during
that process some libbpf issues surfaced [1]: When libbpf was built
as a shared library, libelf was not included in the linking phase.
Since libelf is an internal depedency to libbpf, libelf should be
included. This patch adds '-lelf' to resolve that.
[1] https://patches.dpdk.org/patch/50704/#93571
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Suggested-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The xsk.h header file was missing from the install_headers target in
the Makefile. This patch simply adds xsk.h to the set of installed
headers.
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Reported-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:
1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
3) Fix documentation for some eBPF helpers, from Quentin Monnet.
4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
5) Set descriptor ownership bit at the right time for jumbo frames in
stmmac driver, from Aaro Koskinen.
6) Set IFF_UP properly in tun driver, from Eric Dumazet.
7) Fix load/store doubleword instruction generation in powerpc eBPF
JIT, from Naveen N. Rao.
8) nla_nest_start() return value checks all over, from Kangjie Lu.
9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
merge window. From Marcelo Ricardo Leitner and Xin Long.
10) Fix memory corruption with large MTUs in stmmac, from Aaro
Koskinen.
11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
Dumazet.
12) Fix topology subscription cancellation in tipc, from Erik Hugne.
13) Memory leak in genetlink error path, from Yue Haibing.
14) Valid control actions properly in packet scheduler, from Davide
Caratti.
15) Even if we get EEXIST, we still need to rehash if a shrink was
delayed. From Herbert Xu.
16) Fix interrupt mask handling in interrupt handler of r8169, from
Heiner Kallweit.
17) Fix leak in ehea driver, from Wen Yang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
dpaa2-eth: fix race condition with bql frame accounting
chelsio: use BUG() instead of BUG_ON(1)
net: devlink: skip info_get op call if it is not defined in dumpit
net: phy: bcm54xx: Encode link speed and activity into LEDs
tipc: change to check tipc_own_id to return in tipc_net_stop
net: usb: aqc111: Extend HWID table by QNAP device
net: sched: Kconfig: update reference link for PIE
net: dsa: qca8k: extend slave-bus implementations
net: dsa: qca8k: remove leftover phy accessors
dt-bindings: net: dsa: qca8k: support internal mdio-bus
dt-bindings: net: dsa: qca8k: fix example
net: phy: don't clear BMCR in genphy_soft_reset
bpf, libbpf: clarify bump in libbpf version info
bpf, libbpf: fix version info and add it to shared object
rxrpc: avoid clang -Wuninitialized warning
tipc: tipc clang warning
net: sched: fix cleanup NULL pointer exception in act_mirr
r8169: fix cable re-plugging issue
net: ethernet: ti: fix possible object reference leak
net: ibm: fix possible object reference leak
...
btf_dedup_is_equiv() used to compare btf_type->info fields, before doing
kind-specific equivalence check. This comparsion implicitly verified
that candidate and canonical types are of the same kind. With enum fwd
resolution logic this check couldn't be done generically anymore, as for
enums info contains vlen, which differs between enum fwd and
fully-defined enum, so this check was subsumed by kind-specific
equivalence checks.
This change caused btf_dedup_is_equiv() to let through VOID vs other
types check to reach switch, which was never meant to be handing VOID
kind, as VOID kind is always pre-resolved to itself and is only
equivalent to itself, which is checked early in btf_dedup_is_equiv().
This change adds back BTF kind equality check in place of more generic
btf_type->info check, still defering further kind-specific checks to
a per-kind switch.
Fixes: 9768095ba9 ("btf: resolve enum fwds in btf_dedup")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current documentation suggests that we would need to bump the
libbpf version on every change. Lets clarify this a bit more and
reflect what we do today in practice, that is, bumping it once per
development cycle.
Fixes: 76d1b894c5 ("libbpf: Document API and ABI conventions")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Even though libbpf's versioning script for the linker (libbpf.map)
is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has
not been updated along with it and is therefore still on 0.0.1.
While fixing up, I also noticed that the generated shared object
versioning information is missing, typical convention is to have
a linker name (libbpf.so), soname (libbpf.so.0) and real name
(libbpf.so.0.0.2) for library management. This is based upon the
LIBBPF_VERSION as well.
The build will then produce the following bpf libraries:
# ll libbpf*
libbpf.a
libbpf.so -> libbpf.so.0.0.2
libbpf.so.0 -> libbpf.so.0.0.2
libbpf.so.0.0.2
# readelf -d libbpf.so.0.0.2 | grep SONAME
0x000000000000000e (SONAME) Library soname: [libbpf.so.0]
And install them accordingly:
# rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/btf.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so.0.0.2
LINK /tmp/bld/test_libbpf
INSTALL /tmp/bld/libbpf.a
INSTALL /tmp/bld/libbpf.so.0.0.2
# ll /usr/local/lib64/libbpf.*
/usr/local/lib64/libbpf.a
/usr/local/lib64/libbpf.so -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0.0.2
Fixes: 1bf4b05810 ("tools: bpftool: add probes for eBPF program types")
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF:
Song Liu:
- Add support for annotating BPF programs, using the PERF_RECORD_BPF_EVENT
and PERF_RECORD_KSYMBOL recently added to the kernel and plugging
binutils's libopcodes disassembly of BPF programs with the existing
annotation interfaces in 'perf annotate', 'perf report' and 'perf top'
various output formats (--stdio, --stdio2, --tui).
perf list:
Andi Kleen:
- Filter metrics when using substring search.
perf record:
Andi Kleen:
- Allow to limit number of reported perf.data files
- Clarify help for --switch-output.
perf report:
Andi Kleen
- Indicate JITed code better.
- Show all sort keys in help output.
perf script:
Andi Kleen:
- Support relative time.
perf stat:
Andi Kleen:
- Improve scaling.
General:
Changbin Du:
- Fix some mostly error path memory and reference count leaks found
using gcc's ASan and UBSan.
Vendor events:
Mamatha Inamdar:
- Remove P8 HW events which are not supported.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXJOmigAKCRCyPKLppCJ+
J+EPAQDNzH1M3uJ6cOhyzAMowpsl0Dgs0Q+5iNlOnDYVr2RfhgEA2Sr2fQyl/qiG
h6jRbzvdE+PTXbcMNO79ajmufAHdLgQ=
=DuTU
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.1-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo:
BPF:
Song Liu:
- Add support for annotating BPF programs, using the PERF_RECORD_BPF_EVENT
and PERF_RECORD_KSYMBOL recently added to the kernel and plugging
binutils's libopcodes disassembly of BPF programs with the existing
annotation interfaces in 'perf annotate', 'perf report' and 'perf top'
various output formats (--stdio, --stdio2, --tui).
perf list:
Andi Kleen:
- Filter metrics when using substring search.
perf record:
Andi Kleen:
- Allow to limit number of reported perf.data files
- Clarify help for --switch-output.
perf report:
Andi Kleen
- Indicate JITed code better.
- Show all sort keys in help output.
perf script:
Andi Kleen:
- Support relative time.
perf stat:
Andi Kleen:
- Improve scaling.
General:
Changbin Du:
- Fix some mostly error path memory and reference count leaks found
using gcc's ASan and UBSan.
Vendor events:
Mamatha Inamdar:
- Remove P8 HW events which are not supported.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
kernel:
Stephane Eranian :
- Restore mmap record type correctly when handling PERF_RECORD_MMAP2
events, as the same template is used for all the threads interested
in mmap events, some may want just PERF_RECORD_MMAP, while some
may want the extra info in MMAP2 records.
perf probe:
Adrian Hunter:
- Fix getting the kernel map, because since changes related to x86 PTI
entry trampolines handling, there are more than one kernel map.
perf script:
Andi Kleen:
- Support insn output for normal samples, i.e.:
perf script -F ip,sym,insn --xed
Will fetch the sample IP from the thread address space and feed it
to Intel's XED disassembler, producing lines such as:
ffffffffa4068804 native_write_msr wrmsr
ffffffffa415b95e __hrtimer_next_event_base movq 0x18(%rax), %rdx
That match 'perf annotate's output.
- Make the --cpu filter apply to PERF_RECORD_COMM/FORK/... events, in
addition to PERF_RECORD_SAMPLE.
perf report:
- Add a new --samples option to save a small random number of samples
per hist entry, using a reservoir technique to select a representative
number of samples.
Then allow browsing the samples using 'perf script' as part of the hist
entry context menu. This automatically adds the right filters, so only
the thread or CPU of the sample is displayed. Then we use less' search
functionality to directly jump to the time stamp of the selected sample.
It uses different menus for assembler and source display. Assembler
needs xed installed and source needs debuginfo.
- Fix the UI browser scripts pop up menu when there are many scripts
available.
perf report:
Andi Kleen:
- Add 'time' sort option. E.g.:
% perf report --sort time,overhead,symbol --time-quantum 1ms --stdio
...
0.67% 277061.87300 [.] _dl_start
0.50% 277061.87300 [.] f1
0.50% 277061.87300 [.] f2
0.33% 277061.87300 [.] main
0.29% 277061.87300 [.] _dl_lookup_symbol_x
0.29% 277061.87300 [.] dl_main
0.29% 277061.87300 [.] do_lookup_x
0.17% 277061.87300 [.] _dl_debug_initialize
0.17% 277061.87300 [.] _dl_init_paths
0.08% 277061.87300 [.] check_match
0.04% 277061.87300 [.] _dl_count_modids
1.33% 277061.87400 [.] f1
1.33% 277061.87400 [.] f2
1.33% 277061.87400 [.] main
1.17% 277061.87500 [.] main
1.08% 277061.87500 [.] f1
1.08% 277061.87500 [.] f2
1.00% 277061.87600 [.] main
0.83% 277061.87600 [.] f1
0.83% 277061.87600 [.] f2
1.00% 277061.87700 [.] main
tools headers:
Arnaldo Carvalho de Melo:
- Update x86's syscall_64.tbl, no change in tools/perf behaviour.
- Sync copies asm-generic/unistd.h and linux/in with the kernel sources.
perf data:
Jiri Olsa:
- Prep work to support having perf.data stored as a directory, with one
file per CPU, that ultimately will allow having one ring buffer reading
thread per CPU.
Vendor events:
Martin Liška:
- perf PMU events for AMD Family 17h.
perf script python:
Tony Jones:
- Add python3 support for the remaining Intel PT related scripts, with
these we should have a clean build of perf with python3 while still
supporting the build with python2.
libbpf:
Arnaldo Carvalho de Melo:
- Fix the build on uCLibc, adding the missing stdarg.h since we use
va_list in one typedef.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXIbMlgAKCRCyPKLppCJ+
J/fzAQDNlP1cEuryAfWCDZ/sf5N/76srvkt/kIyYO0CliCjiBAEAiHRWrhsNs1Gd
Z8626lCTYt7BTdz5yfTb7gbt/n7xNAY=
=Ycye
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.1-20190311' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo:
kernel:
Stephane Eranian :
- Restore mmap record type correctly when handling PERF_RECORD_MMAP2
events, as the same template is used for all the threads interested
in mmap events, some may want just PERF_RECORD_MMAP, while some
may want the extra info in MMAP2 records.
perf probe:
Adrian Hunter:
- Fix getting the kernel map, because since changes related to x86 PTI
entry trampolines handling, there are more than one kernel map.
perf script:
Andi Kleen:
- Support insn output for normal samples, i.e.:
perf script -F ip,sym,insn --xed
Will fetch the sample IP from the thread address space and feed it
to Intel's XED disassembler, producing lines such as:
ffffffffa4068804 native_write_msr wrmsr
ffffffffa415b95e __hrtimer_next_event_base movq 0x18(%rax), %rdx
That match 'perf annotate's output.
- Make the --cpu filter apply to PERF_RECORD_COMM/FORK/... events, in
addition to PERF_RECORD_SAMPLE.
perf report:
- Add a new --samples option to save a small random number of samples
per hist entry, using a reservoir technique to select a representative
number of samples.
Then allow browsing the samples using 'perf script' as part of the hist
entry context menu. This automatically adds the right filters, so only
the thread or CPU of the sample is displayed. Then we use less' search
functionality to directly jump to the time stamp of the selected sample.
It uses different menus for assembler and source display. Assembler
needs xed installed and source needs debuginfo.
- Fix the UI browser scripts pop up menu when there are many scripts
available.
perf report:
Andi Kleen:
- Add 'time' sort option. E.g.:
% perf report --sort time,overhead,symbol --time-quantum 1ms --stdio
...
0.67% 277061.87300 [.] _dl_start
0.50% 277061.87300 [.] f1
0.50% 277061.87300 [.] f2
0.33% 277061.87300 [.] main
0.29% 277061.87300 [.] _dl_lookup_symbol_x
0.29% 277061.87300 [.] dl_main
0.29% 277061.87300 [.] do_lookup_x
0.17% 277061.87300 [.] _dl_debug_initialize
0.17% 277061.87300 [.] _dl_init_paths
0.08% 277061.87300 [.] check_match
0.04% 277061.87300 [.] _dl_count_modids
1.33% 277061.87400 [.] f1
1.33% 277061.87400 [.] f2
1.33% 277061.87400 [.] main
1.17% 277061.87500 [.] main
1.08% 277061.87500 [.] f1
1.08% 277061.87500 [.] f2
1.00% 277061.87600 [.] main
0.83% 277061.87600 [.] f1
0.83% 277061.87600 [.] f2
1.00% 277061.87700 [.] main
tools headers:
Arnaldo Carvalho de Melo:
- Update x86's syscall_64.tbl, no change in tools/perf behaviour.
- Sync copies asm-generic/unistd.h and linux/in with the kernel sources.
perf data:
Jiri Olsa:
- Prep work to support having perf.data stored as a directory, with one
file per CPU, that ultimately will allow having one ring buffer reading
thread per CPU.
Vendor events:
Martin Liška:
- perf PMU events for AMD Family 17h.
perf script python:
Tony Jones:
- Add python3 support for the remaining Intel PT related scripts, with
these we should have a clean build of perf with python3 while still
supporting the build with python2.
libbpf:
Arnaldo Carvalho de Melo:
- Fix the build on uCLibc, adding the missing stdarg.h since we use
va_list in one typedef.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, bpf_prog_info includes 9 arrays. The user has the option to
fetch any combination of these arrays. However, this requires a lot of
handling.
This work becomes more tricky when we need to store bpf_prog_info to a
file, because these arrays are allocated independently.
This patch introduces 'struct bpf_prog_info_linear', which stores arrays
of bpf_prog_info in continuous memory.
Helper functions are introduced to unify the work to get different sets
of bpf_prog_info. Specifically, bpf_program__get_prog_info_linear()
allows the user to select which arrays to fetch, and handles details for
the user.
Please see the comments right before 'enum bpf_prog_info_array' for more
details and examples.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lkml.kernel.org/r/ce92c091-e80d-a0c1-4aa0-987706c42b20@iogearbox.net
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Optimization level '-Og' offers a reasonable level of optimization while
maintaining fast compilation and a good debugging experience. This patch
tries to make it work.
$ make DEBUG=1 EXTRA_CFLAGS='-Og'
bench/epoll-ctl.c: In function ‘do_threads’:
bench/epoll-ctl.c:274:9: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return ret;
^~~
...
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190316080556.3075-4-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC and clang support enum forward declarations as an extension. Such
forward-declared enums will be represented as normal BTF_KIND_ENUM types with
vlen=0. This patch adds ability to resolve such enums to their corresponding
fully defined enums. This helps to avoid duplicated BTF type graphs which only
differ by some types referencing forward-declared enum vs full enum.
One such example in kernel is enum irqchip_irq_state, defined in
include/linux/interrupt.h and forward-declared in include/linux/irq.h. This
causes entire struct task_struct and all referenced types to be duplicated in
btf_dedup output. This patch eliminates such duplication cases.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In xsk_socket__create(), the libbpf_flags field was not checked for
setting currently unused/unknown flags. This patch fixes that by
returning -EINVAL if the user has set any flag that is not in use at
this point in time.
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The libbpf_print_fn_t typedef uses va_list without including the header
where that type is defined, stdarg.h, breaking in places where we're
unlucky for that type not to be already defined by some previously
included header.
Noticed while building on fedora 24 cross building tools/perf to the ARC
architecture using the uClibc C library:
28 fedora:24-x-ARC-uClibc : FAIL arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
CC /tmp/build/perf/tests/llvm.o
In file included from tests/llvm.c:3:0:
/git/linux/tools/lib/bpf/libbpf.h:57:20: error: unknown type name 'va_list'
const char *, va_list ap);
^~~~~~~
/git/linux/tools/lib/bpf/libbpf.h:59:34: error: unknown type name 'libbpf_print_fn_t'
LIBBPF_API void libbpf_set_print(libbpf_print_fn_t fn);
^~~~~~~~~~~~~~~~~
mv: cannot stat '/tmp/build/perf/tests/.llvm.o.tmp': No such file or directory
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: a8a1f7d09c ("libbpf: fix libbpf_print")
Link: https://lkml.kernel.org/n/tip-5270n2quu2gqz22o7itfdx00@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch splits and cleans up error handling logic for loading BTF data.
Previously, if BTF data was parsed successfully, but failed to load into
kernel, we'd report nonsensical error code, instead of error returned from
btf__load(). Now btf__new() and btf__load() are handled separately with proper
cleanup and warning reporting.
Fixes: d29d87f7e6 ("btf: separate btf creation and loading")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We could end up in situation when we have object file w/ all btf
info, but kernel does not support btf yet. In this situation
currently libbpf just set obj->btf to NULL w/o freeing it first.
This patch is fixing it by making sure to run btf__free first.
Fixes: d29d87f7e6 ("btf: separate btf creation and loading")
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf targets don't explicitly depend on fixdep target, so when
we do 'make -j$(nproc)', there is a high probability, that some
objects will be built before fixdep binary is available.
Fix this by running sub-make; this makes sure that fixdep dependency
is properly accounted for.
For the same issue in perf, see commit abb26210a3 ("perf tools: Force
fixdep compilation at the start of the build").
Before:
$ rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld -C tools/lib/bpf/
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
HOSTCC /tmp/bld/fixdep.o
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/btf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
HOSTLD /tmp/bld/fixdep-in.o
LINK /tmp/bld/fixdep
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so
LINK /tmp/bld/test_libbpf
$ head /tmp/bld/.libbpf.o.cmd
# cannot find fixdep (/usr/local/google/home/sdf/src/linux/xxx//fixdep)
# using basic dep data
/tmp/bld/libbpf.o: libbpf.c /usr/include/stdc-predef.h \
/usr/include/stdlib.h /usr/include/features.h \
/usr/include/x86_64-linux-gnu/sys/cdefs.h \
/usr/include/x86_64-linux-gnu/bits/wordsize.h \
/usr/include/x86_64-linux-gnu/gnu/stubs.h \
/usr/include/x86_64-linux-gnu/gnu/stubs-64.h \
/usr/lib/gcc/x86_64-linux-gnu/7/include/stddef.h \
After:
$ rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld -C tools/lib/bpf/
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
HOSTCC /tmp/bld/fixdep.o
HOSTLD /tmp/bld/fixdep-in.o
LINK /tmp/bld/fixdep
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/btf.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so
LINK /tmp/bld/test_libbpf
$ head /tmp/bld/.libbpf.o.cmd
cmd_/tmp/bld/libbpf.o := gcc -Wp,-MD,/tmp/bld/.libbpf.o.d -Wp,-MT,/tmp/bld/libbpf.o -g -Wall -DHAVE_LIBELF_MMAP_SUPPORT -DCOMPAT_NEED_REALLOCARRAY -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wshadow -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Werror -Wall -fPIC -I. -I/usr/local/google/home/sdf/src/linux/tools/include -I/usr/local/google/home/sdf/src/linux/tools/arch/x86/include/uapi -I/usr/local/google/home/sdf/src/linux/tools/include/uapi -fvisibility=hidden -D"BUILD_STR(s)=$(pound)s" -c -o /tmp/bld/libbpf.o libbpf.c
source_/tmp/bld/libbpf.o := libbpf.c
deps_/tmp/bld/libbpf.o := \
/usr/include/stdc-predef.h \
/usr/include/stdlib.h \
/usr/include/features.h \
/usr/include/x86_64-linux-gnu/sys/cdefs.h \
/usr/include/x86_64-linux-gnu/bits/wordsize.h \
Fixes: 7c422f5572 ("tools build: Build fixdep helper from perf and basic libs")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When checking available canonical candidates for struct/union algorithm
utilizes btf_dedup_is_equiv to determine if candidate is suitable. This
check is not enough when candidate is corresponding FWD for that
struct/union, because according to equivalence logic they are
equivalent. When it so happens that FWD and STRUCT/UNION end in hashing
to the same bucket, it's possible to create remapping loop from FWD to
STRUCT and STRUCT to same FWD, which will cause btf_dedup() to loop
forever.
This patch fixes the issue by additionally checking that type and
canonical candidate are strictly equal (utilizing btf_equal_struct).
Fixes: d5caef5b56 ("btf: add BTF types deduplication algorithm")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Default size of dedup table (16k) is good enough for most binaries, even
typical vmlinux images. But there are cases of binaries with huge amount
of BTF types (e.g., allyesconfig variants of kernel), which benefit from
having bigger dedup table size to lower amount of unnecessary hash
collisions. Tools like pahole, thus, can tune this parameter to reach
optimal performance.
This change also serves double purpose of allowing tests to force hash
collisions to test some corner cases, used in follow up patch.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix invalid formatting of pointer arg.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The "ref_type_id" variable needs to be signed for the error handling
to work.
Fixes: d5caef5b56 ("btf: add BTF types deduplication algorithm")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
readelf truncates its output by default to attempt to make it more
readable. This can lead to function names getting aliased if they
differ late in the string. Use --wide parameter to avoid
truncation.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For historical reasons the helper to loop over maps in an object
is called bpf_map__for_each while it really should be called
bpf_object__for_each_map. Rename and add a correctly named
define for backward compatibility.
Switch all in-tree users to the correct name (Quentin).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit adds AF_XDP support to libbpf. The main reason for this is
to facilitate writing applications that use AF_XDP by offering
higher-level APIs that hide many of the details of the AF_XDP
uapi. This is in the same vein as libbpf facilitates XDP adoption by
offering easy-to-use higher level interfaces of XDP
functionality. Hopefully this will facilitate adoption of AF_XDP, make
applications using it simpler and smaller, and finally also make it
possible for applications to benefit from optimizations in the AF_XDP
user space access code. Previously, people just copied and pasted the
code from the sample application into their application, which is not
desirable.
The interface is composed of two parts:
* Low-level access interface to the four rings and the packet
* High-level control plane interface for creating and setting
up umems and af_xdp sockets as well as a simple XDP program.
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
While it's understandable why kernel limits number of BTF types to 65535
and size of string section to 64KB, in libbpf as user-space library it's
too restrictive. E.g., pahole converting DWARF to BTF type information
for Linux kernel generates more than 3 million BTF types and more than
3MB of strings, before deduplication. So to allow btf__dedup() to do its
work, we need to be able to load bigger BTF sections using btf__new().
Singed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new accessor for bpf_object to get opaque struct btf * from it.
struct btf * is needed for all operations with BTF and it's present in
bpf_object. The only thing missing is a way to get it.
Example use-case is to get BTF key_type_id and value_type_id for a map in
bpf_object. It can be done with btf__get_map_kv_tids() but that function
requires struct btf *.
Similar API can be added for struct btf_ext but no use-case for it yet.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add bpf_map__resize() to change max_entries for a map.
Quite often necessary map size is unknown at compile time and can be
calculated only at run time.
Currently the following approach is used to do so:
* bpf_object__open_buffer() to open Elf file from a buffer;
* bpf_object__find_map_by_name() to find relevant map;
* bpf_map__def() to get map attributes and create struct
bpf_create_map_attr from them;
* update max_entries in bpf_create_map_attr;
* bpf_create_map_xattr() to create new map with updated max_entries;
* bpf_map__reuse_fd() to replace the map in bpf_object with newly
created one.
And after all this bpf_object can finally be loaded. The map will have
new size.
It 1) is quite a lot of steps; 2) doesn't take BTF into account.
For "2)" even more steps should be made and some of them require changes
to libbpf (e.g. to get struct btf * from bpf_object).
Instead the whole problem can be solved by introducing simple
bpf_map__resize() API that checks the map and sets new max_entries if
the map is not loaded yet.
So the new steps are:
* bpf_object__open_buffer() to open Elf file from a buffer;
* bpf_object__find_map_by_name() to find relevant map;
* bpf_map__resize() to update max_entries.
That's much simpler and works with BTF.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bzero() call is deprecated and superseded by memset().
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reported-by: David Laight <david.laight@aculab.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we have btf__get_raw_data() it's trivial for tests to iterate
over all strings for testing purposes, which eliminates the need for
btf__get_strings() API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch changes struct btf_ext to retain original data in sequential
block of memory, which makes it possible to expose
btf_ext__get_raw_data() interface similar to btf__get_raw_data(), allowing
users of libbpf to get access to raw representation of .BTF.ext section.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch exposes new API btf__get_raw_data() that allows to get a copy
of raw BTF data out of struct btf. This is useful for external programs
that need to manipulate raw data, e.g., pahole using btf__dedup() to
deduplicate BTF type info and then writing it back to file.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change splits out previous btf__new functionality of constructing
struct btf and loading it into kernel into two:
- btf__new() just creates and initializes struct btf
- btf__load() attempts to load existing struct btf into kernel
btf__free will still close BTF fd, if it was ever loaded successfully
into kernel.
This change allows users of libbpf to manipulate BTF using its API,
without the need to unnecessarily load it into kernel.
One of the intended use cases is pahole, which will do DWARF to BTF
conversion and then use libbpf to do type deduplication, while then
handling ELF sections overwriting and other concerns on its own.
Fixes: 2d3feca8c4 ("bpf: btf: print map dump and lookup with btf info")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kernel verifier has three levels of logs:
0: no logs
1: logs mostly useful
> 1: verbose
Current libbpf API functions bpf_load_program_xattr() and
bpf_load_program() cannot specify log_level.
The bcc, however, provides an interface for user to
specify log_level 2 for verbose output.
This patch added log_level into structure
bpf_load_program_attr, so users, including bcc, can use
bpf_load_program_xattr() to change log_level. The
supported log_level is 0, 1, and 2.
The bpf selftest test_sock.c is modified to enable log_level = 2.
If the "verbose" in test_sock.c is changed to true,
the test will output logs like below:
$ ./test_sock
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
0: (bf) r6 = r1
1: R1=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
1: (61) r7 = *(u32 *)(r6 +28)
invalid bpf_context access off=28 size=4
Test case: bind4 load with invalid access: src_ip6 .. [PASS]
...
Test case: bind6 allow all .. [PASS]
Summary: 16 PASSED, 0 FAILED
Some test_sock tests are negative tests and verbose verifier
log will be printed out as shown in the above.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Few files in libbpf are using bzero() function (defined in strings.h header), but
don't include corresponding header. When libbpf is added as a dependency to pahole,
this undeterministically causes warnings on some machines:
bpf.c:225:2: warning: implicit declaration of function 'bzero' [-Wimplicit-function-declaration]
bzero(&attr, sizeof(attr));
^~~~~
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 96408c4344 ("tools/bpf: implement libbpf
btf__get_map_kv_tids() API function") refactored
function bpf_map_find_btf_info() and moved bulk of
implementation into btf.c as btf__get_map_kv_tids().
This change introduced a bug such that test_btf will
print out the following warning although the test passed:
BTF libbpf test[2] (test_btf_nokv.o): libbpf: map:btf_map
container_name:____btf_map_btf_map cannot be found
in BTF. Missing BPF_ANNOTATE_KV_PAIR?
Previously, the error message is guarded with pr_debug().
Commit 96408c4344 changed it to pr_warning() and
hence caused the warning.
Restoring to pr_debug() for the message fixed the issue.
Fixes: 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
added the API function btf__get_map_kv_tids():
btf__get_map_kv_tids(const struct btf *btf, char *map_name, ...)
The parameter map_name has type "char *". This is okay inside libbpf library since
the map_name is from bpf_map->name which also has type "char *".
This will be problematic if the caller for map_name already has attribute "const",
e.g., from C++ string.c_str(). It will result in either a warning or an error.
/home/yhs/work/bcc/src/cc/btf.cc:166:51:
error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
return btf__get_map_kv_tids(btf_, map_name.c_str()
This patch added "const" attributes to map_name parameter.
Fixes: 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch sets up a new kind of tests (BTF dedup tests) and tests few aspects of
BTF dedup algorithm. More complete set of tests will come in follow up patches.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch implements BTF types deduplication algorithm. It allows to
greatly compress typical output of pahole's DWARF-to-BTF conversion or
LLVM's compilation output by detecting and collapsing identical types emitted in
isolation per compilation unit. Algorithm also resolves struct/union forward
declarations into concrete BTF types representing referenced struct/union. If
undesired, this resolution can be disabled through specifying corresponding options.
Algorithm itself and its application to Linux kernel's BTF types is
described in details at:
https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This pre-patch extracts calculation of amount of space taken by BTF type descriptor
for later reuse by btf_dedup functionality.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With the recent print rework we now have the following problem:
pr_{warning,info,debug} expand to __pr which calls libbpf_print.
libbpf_print does va_start and calls __libbpf_pr with va_list argument.
In __base_pr we again do va_start. Because the next argument is a
va_list, we don't get correct pointer to the argument (and print noting
in my case, I don't know why it doesn't crash tbh).
Fix this by changing libbpf_print_fn_t signature to accept va_list and
remove unneeded calls to va_start in the existing users.
Alternatively, this can we solved by exporting __libbpf_pr and
changing __pr macro to (and killing libbpf_print):
{
if (__libbpf_pr)
__libbpf_pr(level, "libbpf: " fmt, ##__VA_ARGS__)
}
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, to get map key/value type id's, the macro
BPF_ANNOTATE_KV_PAIR(<map_name>, <key_type>, <value_type>)
needs to be defined in the bpf program for the
corresponding map.
During program/map loading time,
the local static function bpf_map_find_btf_info()
in libbpf.c is implemented to retrieve the key/value
type ids given the map name.
The patch refactored function bpf_map_find_btf_info()
to create an API btf__get_map_kv_tids() which includes
the bulk of implementation for the original function.
The API btf__get_map_kv_tids() can be used by bcc,
a JIT based bpf compilation system, which uses the
same BPF_ANNOTATE_KV_PAIR to record map key/value types.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following set of functions, which manipulates .BTF.ext
section, are exposed as API functions:
. btf_ext__new
. btf_ext__free
. btf_ext__reloc_func_info
. btf_ext__reloc_line_info
. btf_ext__func_info_rec_size
. btf_ext__line_info_rec_size
These functions are useful for JIT based bpf codegen, e.g.,
bcc, to manipulate in-memory .BTF.ext sections.
The signature of function btf_ext__reloc_func_info()
is also changed to be the same as its definition in btf.c.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the libbpf API function libbpf_set_print()
takes three function pointer parameters for warning, info
and debug printout respectively.
This patch changes the API to have just one function pointer
parameter and the function pointer has one additional
parameter "debugging level". So if in the future, if
the debug level is increased, the function signature
won't change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the btf log is allocated and printed out in case
of error at LIBBPF_DEBUG level.
Such logs from kernel are very important for debugging.
For example, bpf syscall BPF_PROG_LOAD command can get
verifier logs back to user space. In function load_program()
of libbpf.c, the log buffer is allocated unconditionally
and printed out at pr_warning() level.
Let us do the similar thing here for btf. Allocate buffer
unconditionally and print out error logs at pr_warning() level.
This can reduce one global function and
optimize for common situations where pr_warning()
is activated either by default or by user supplied
debug output function.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A global function libbpf_print, which is invisible
outside the shared library, is defined to print based
on levels. The pr_warning, pr_info and pr_debug
macros are moved into the newly created header
common.h. So any .c file including common.h can
use these macros directly.
Currently btf__new and btf_ext__new API has an argument getting
__pr_debug function pointer into btf.c so the debugging information
can be printed there. This patch removed this parameter
from btf__new and btf_ext__new and directly using pr_debug in btf.c.
Another global function libbpf_print_level_available, also
invisible outside the shared library, can test
whether a particular level debug printing is
available or not. It is used in btf.c to
test whether DEBUG level debug printing is availabl or not,
based on which the log buffer will be allocated when loading
btf to the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since we have a dedicated netlink attributes for xdp setup on a
particular interface, it is now possible to retrieve the program id that
is currently attached to the interface. The use case is targeted for
sample xdp programs, which will store the program id just after loading
bpf program onto iface. On shutdown, the sample will make sure that it
can unload the program by querying again the iface and verifying that
both program id's matches.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
XDP samples are mostly cooperating with eBPF maps through their file
descriptors. In case of a eBPF program that contains multiple maps it
might be tiresome to iterate through them and call bpf_map__fd for each
one. Add a helper mostly based on bpf_object__find_map_by_name, but
instead of returning the struct bpf_map pointer, return map fd.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-01-29
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Teach verifier dead code removal, this also allows for optimizing /
removing conditional branches around dead code and to shrink the
resulting image. Code store constrained architectures like nfp would
have hard time doing this at JIT level, from Jakub.
2) Add JMP32 instructions to BPF ISA in order to allow for optimizing
code generation for 32-bit sub-registers. Evaluation shows that this
can result in code reduction of ~5-20% compared to 64 bit-only code
generation. Also add implementation for most JITs, from Jiong.
3) Add support for __int128 types in BTF which is also needed for
vmlinux's BTF conversion to work, from Yonghong.
4) Add a new command to bpftool in order to dump a list of BPF-related
parameters from the system or for a specific network device e.g. in
terms of available prog/map types or helper functions, from Quentin.
5) Add AF_XDP sock_diag interface for querying sockets from user
space which provides information about the RX/TX/fill/completion
rings, umem, memory usage etc, from Björn.
6) Add skb context access for skb_shared_info->gso_segs field, from Eric.
7) Add support for testing flow dissector BPF programs by extending
existing BPF_PROG_TEST_RUN infrastructure, from Stanislav.
8) Split BPF kselftest's test_verifier into various subgroups of tests
in order better deal with merge conflicts in this area, from Jakub.
9) Add support for queue/stack manipulations in bpftool, from Stanislav.
10) Document BTF, from Yonghong.
11) Dump supported ELF section names in libbpf on program load
failure, from Taeung.
12) Silence a false positive compiler warning in verifier's BTF
handling, from Peter.
13) Fix help string in bpftool's feature probing, from Prashant.
14) Remove duplicate includes in BPF kselftests, from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to let users check their wrong ELF section name with proper
ELF section names when they fail to get a prog/attach type from it.
Because users can't realize libbpf guess prog/attach types from given
ELF section names. For example, when a 'cgroup' section name of a
BPF program is used, show available ELF section names(types).
Before:
$ bpftool prog load bpf-prog.o /sys/fs/bpf/prog1
Error: failed to guess program type based on ELF section name cgroup
After:
libbpf: failed to guess program type based on ELF section name 'cgroup'
libbpf: supported section(type) names are: socket kprobe/ kretprobe/ classifier action tracepoint/ raw_tracepoint/ xdp perf_event lwt_in lwt_out lwt_xmit lwt_seg6local cgroup_skb/ingress cgroup_skb/egress cgroup/skb cgroup/sock cgroup/post_bind4 cgroup/post_bind6 cgroup/dev sockops sk_skb/stream_parser sk_skb/stream_verdict sk_skb sk_msg lirc_mode2 flow_dissector cgroup/bind4 cgroup/bind6 cgroup/connect4 cgroup/connect6 cgroup/sendmsg4 cgroup/sendmsg6
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Similarly to what was done for program types and map types, add a set of
probes to test the availability of the different eBPF helper functions
on the current system.
For each known program type, all known helpers are tested, in order to
establish a compatibility matrix. Output is provided as a set of lists
of available helpers, one per program type.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF helper functions...
eBPF helpers supported for program type socket_filter:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
eBPF helpers supported for program type kprobe:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
# bpftool --json --pretty feature probe kernel
{
...
"helpers": {
"socket_filter_available_helpers": ["bpf_map_lookup_elem", \
"bpf_map_update_elem","bpf_map_delete_elem", ...
],
"kprobe_available_helpers": ["bpf_map_lookup_elem", \
"bpf_map_update_elem","bpf_map_delete_elem", ...
],
...
}
}
v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.
v4:
- Use "enum bpf_func_id" instead of "__u32" in bpf_probe_helper()
declaration for the type of the argument used to pass the id of
the helper to probe.
- Undef BPF_HELPER_MAKE_ENTRY after using it.
v3:
- Do not pass kernel version from bpftool to libbpf probes (kernel
version for testing program with kprobes is retrieved directly from
libbpf).
- Dump one list of available helpers per program type (instead of one
list of compatible program types per helper).
v2:
- Move probes from bpftool to libbpf.
- Test all program types for each helper, print a list of working prog
types for each helper.
- Fall back on include/uapi/linux/bpf.h for names and ids of helpers.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new probes for eBPF map types, to detect what are the ones available
on the system. Try creating one map of each type, and see if the kernel
complains.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF map types...
eBPF map_type hash is available
eBPF map_type array is available
eBPF map_type prog_array is available
...
# bpftool --json --pretty feature probe kernel
{
...
"map_types": {
"have_hash_map_type": true,
"have_array_map_type": true,
"have_prog_array_map_type": true,
...
}
}
v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.
v3:
- Use a switch with all enum values for setting specific map parameters,
so that gcc complains at compile time (-Wswitch-enum) if new map types
were added to the kernel but libbpf was not updated.
v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce probes for supported BPF program types in libbpf, and call it
from bpftool to test what types are available on the system. The probe
simply consists in loading a very basic program of that type and see if
the verifier complains or not.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF program types...
eBPF program_type socket_filter is available
eBPF program_type kprobe is available
eBPF program_type sched_cls is available
...
# bpftool --json --pretty feature probe kernel
{
...
"program_types": {
"have_socket_filter_prog_type": true,
"have_kprobe_prog_type": true,
"have_sched_cls_prog_type": true,
...
}
}
v5:
- In libbpf.map, move global symbol to a new LIBBPF_0.0.2 section.
- Rename (non-API function) prog_load() as probe_load().
v3:
- Get kernel version for checking kprobes availability from libbpf
instead of from bpftool. Do not pass kernel_version as an argument
when calling libbpf probes.
- Use a switch with all enum values for setting specific program
parameters just before probing, so that gcc complains at compile time
(-Wswitch-enum) if new prog types were added to the kernel but libbpf
was not updated.
- Add a comment in libbpf.h about setrlimit() usage to allow many
consecutive probe attempts.
v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We are already including tools/scripts/Makefile.include which correctly
handles CROSS_COMPILE, no need to define our own vars.
See related commit 7ed1c1901f ("tools: fix cross-compile var clobbering")
for more details.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit c3494801cd ("bpf: check pending signals while
verifying programs") makes it possible for the BPF_PROG_LOAD
to fail with EAGAIN. Retry unconditionally in this case.
Fixes: c3494801cd ("bpf: check pending signals while verifying programs")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We build test_libbpf with CXX to make sure linking against C++ works.
$ make -s -C tools/lib/bpf
$ git status -sb
? tools/lib/bpf/test_libbpf
$ make -s -C tools/testing/selftests/bpf
$ git status -sb
? tools/lib/bpf/test_libbpf
? tools/testing/selftests/bpf/test_libbpf
Fixes: 8c4905b995 ("libbpf: make sure bpf headers are c++ include-able")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Given this came up couple of times, add a note to libbpf's readme
about the semi-automated mirror for a stand-alone build which is
officially managed by BPF folks. While at it, also explicitly state
the libbpf license in the readme file.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch fixes a memory leak in libbpf by freeing up line_info
member of struct bpf_program while unloading a program.
Fixes: 3d65014146 ("bpf: libbpf: Add btf_line_info support to libbpf")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
kernel can provide the func_info and line_info even
it fails the btf_dump_raw_ok() test because they don't contain
kernel address. This patch removes the corresponding '== 0'
test.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rename all occurances of *_info_cnt field access
to nr_*_info in tools directory.
The local variables finfo_cnt, linfo_cnt and jited_linfo_cnt
in function do_dump() of tools/bpf/bpftool/prog.c are also
changed to nr_finfo, nr_linfo and nr_jited_linfo to
keep naming convention consistent.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds bpf_line_info support to libbpf:
1) Parsing the line_info sec from ".BTF.ext"
2) Relocating the line_info. If the main prog *_info relocation
fails, it will ignore the remaining subprog line_info and continue.
If the subprog *_info relocation fails, it will bail out.
3) BPF_PROG_LOAD a prog with line_info
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch refactor and fix a bug in the libbpf's bpf_func_info loading
logic. The bug fix and refactoring are targeting the same
commit 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
which is in the bpf-next branch.
1) In bpf_load_program_xattr(), it should retry when errno == E2BIG
regardless of log_buf and log_buf_sz. This patch fixes it.
2) btf_ext__reloc_init() and btf_ext__reloc() are essentially
the same except btf_ext__reloc_init() always has insns_cnt == 0.
Hence, btf_ext__reloc_init() is removed.
btf_ext__reloc() is also renamed to btf_ext__reloc_func_info()
to get ready for the line_info support in the next patch.
3) Consolidate func_info section logic from "btf_ext_parse_hdr()",
"btf_ext_validate_func_info()" and "btf_ext__new()" to
a new function "btf_ext_copy_func_info()" such that similar
logic can be reused by the later libbpf's line_info patch.
4) The next line_info patch will store line_info_cnt instead of
line_info_len in the bpf_program because the kernel is taking
line_info_cnt also. It will save a few "len" to "cnt" conversions
and will also save some function args.
Hence, this patch also makes bpf_program to store func_info_cnt
instead of func_info_len.
5) btf_ext depends on btf. e.g. the func_info's type_id
in ".BTF.ext" is not useful when ".BTF" is absent.
This patch only init the obj->btf_ext pointer after
it has successfully init the obj->btf pointer.
This can avoid always checking "obj->btf && obj->btf_ext"
together for accessing ".BTF.ext". Checking "obj->btf_ext"
alone will do.
6) Move "struct btf_sec_func_info" from btf.h to btf.c.
There is no external usage outside btf.c.
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to info.jited_*, info.func_info could be 0 if
bpf_dump_raw_ok() == false.
This patch makes changes to test_btf and bpftool to expect info.func_info
could be 0.
This patch also makes the needed changes for s/insn_offset/insn_off/.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new function, which encourages safe usage of the test interface.
bpf_prog_test_run continues to work as before, but should be considered
unsafe.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The whole libbpf is licensed as (LGPL-2.1 OR BSD-2-Clause). I missed it
while adding README.rst. Fix it and use same license as all other files
in libbpf do. Since I'm the only author of README.rst so far, no others'
permissions should be needed.
Fixes: 76d1b894c5 ("libbpf: Document API and ABI conventions")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Often we want to write tests cases that check things like bad context
offset accesses. And one way to do this is to use an odd offset on,
for example, a 32-bit load.
This unfortunately triggers the alignment checks first on platforms
that do not set CONFIG_EFFICIENT_UNALIGNED_ACCESS. So the test
case see the alignment failure rather than what it was testing for.
It is often not completely possible to respect the original intention
of the test, or even test the same exact thing, while solving the
alignment issue.
Another option could have been to check the alignment after the
context and other validations are performed by the verifier, but
that is a non-trivial change to the verifier.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
During porting libbpf to bcc, I got some warnings like below:
...
[ 2%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf.c.o
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf.c:12:0:
warning: "_GNU_SOURCE" redefined [enabled by default]
#define _GNU_SOURCE
...
[ 3%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf_errno.c.o
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c: In function ‘libbpf_strerror’:
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c:45:7:
warning: assignment makes integer from pointer without a cast [enabled by default]
ret = strerror_r(err, buf, size);
...
bcc is built with _GNU_SOURCE defined and this caused the above warning.
This patch intends to make libpf _GNU_SOURCE friendly by
. define _GNU_SOURCE in libbpf.c unless it is not defined
. undefine _GNU_SOURCE as non-gnu version of strerror_r is expected.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cannot cast a u64 to a pointer on 32-bit without an intervening (long)
cast otherwise GCC warns.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Document API and ABI for libbpf: naming convention, symbol visibility,
ABI versioning.
This is just a starting point. Documentation can be significantly
extended in the future to cover more topics.
ABI versioning section touches only a few basic points with a link to
more comprehensive documentation from Ulrich Drepper. This section can
be extended in the future when there is better understanding what works
well and what not so well in libbpf development process and production
usage.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since ABI versioning info is kept separately from the code it's easy to
forget to update it while adding a new API.
Add simple verification that all global symbols exported with LIBBPF_API
are versioned in libbpf.map version script.
The idea is to check that number of global symbols in libbpf-in.o, that
is the input to the linker, matches with number of unique versioned
symbols in libbpf.so, that is the output of the linker. If these numbers
don't match, it may mean some symbol was not versioned and make will
fail.
"Unique" means that if a symbol is present in more than one version of
ABI due to ABI changes, it'll be counted once.
Another option to calculate number of global symbols in the "input"
could be to count number of LIBBPF_ABI entries in C headers but it seems
to be fragile.
Example of output when a symbol is missing in version script:
...
LD libbpf-in.o
LINK libbpf.a
LINK libbpf.so
Warning: Num of global symbols in libbpf-in.o (115) does NOT match
with num of versioned symbols in libbpf.so (114). Please make sure all
LIBBPF_API symbols are versioned in libbpf.map.
make: *** [check_abi] Error 1
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
More and more projects use libbpf and one day it'll likely be packaged
and distributed as DSO and that requires ABI versioning so that both
compatible and incompatible changes to ABI can be introduced in a safe
way in the future without breaking executables dynamically linked with a
previous version of the library.
Usual way to do ABI versioning is version script for the linker. Add
such a script for libbpf. All global symbols currently exported via
LIBBPF_API macro are added to the version script libbpf.map.
The version name LIBBPF_0.0.1 is constructed from the name of the
library + version specified by $(LIBBPF_VERSION) in Makefile.
Version script does not duplicate the work done by LIBBPF_API macro, it
rather complements it. The macro is used at compile time and can be used
by compiler to do optimization that can't be done at link time, it is
purely about global symbol visibility. The version script, in turn, is
used at link time and takes care of ABI versioning. Both techniques are
described in details in [1].
Whenever ABI is changed in the future, version script should be changed
appropriately.
[1] https://www.akkadia.org/drepper/dsohowto.pdf
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
s/btf_get_from_id/btf__get_from_id/ to restore the API naming convention.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
currently by default libbpf's bpf_object__open requires
bpf's program to specify version in a code because of two things:
1) default prog type is set to KPROBE
2) KPROBE requires (in kernel/bpf/syscall.c) version to be specified
in this patch i'm changing default prog type to UNSPEC and also changing
requirments for version's section to be present in object file.
now it would reflect what we have today in kernel
(only KPROBE prog type requires for version to be explicitly set).
v1 -> v2:
- RFC tag has been dropped
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
idea is pretty simple. for specified map (pointed by struct bpf_map)
we would provide descriptor of already loaded map, which is going to be
used as a prototype for inner map. proposed workflow:
1) open bpf's object (bpf_object__open)
2) create bpf's map which is going to be used as a prototype
3) find (by name) map-in-map which you want to load and update w/
descriptor of inner map w/ a new helper from this patch
4) load bpf program w/ bpf_object__load
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use recently added capability check.
See commit 23499442c3 ("bpf: libbpf: retry map creation without
the name") for rationale.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Instead, check for a newly created caps.name bpf_object capability.
If kernel doesn't support names, don't specify the attribute.
See commit 23499442c3 ("bpf: libbpf: retry map creation without
the name") for rationale.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It currently only checks whether kernel supports map/prog names.
This capability check will be used in the next two commits to
skip setting prog/map names.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Wrap headers in extern "C", to turn off C++ mangling.
This simplifies including libbpf in c++ and linking against it.
v2 changes:
* do the same for btf.h
v3 changes:
* test_libbpf.cpp to test for possible future c++ breakages
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
added support to read .BTF.ext sections from an object file, create
and pass prog_btf_fd and func_info to the kernel.
The program btf_fd (prog->btf_fd) is initialized to be -1 to please
zclose so we do not need special handling dur prog close.
Passing -1 to the kernel, however, will cause loading error.
Passing btf_fd 0 to the kernel if prog->btf_fd is invalid
fixed the problem.
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Reported-by: Andrey Ignatov <rdna@fb.com>
Reported-by: Emre Cantimur <haydum@fb.com>
Tested-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The function get_btf() is implemented in tools/bpf/bpftool/map.c
to get a btf structure given a map_info. This patch
refactored this function to be function btf_get_from_id()
in tools/lib/bpf so that it can be used later.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The .BTF section is already available to encode types.
These types can be used for map
pretty print. The whole .BTF will be passed to the
kernel as well for which kernel can verify and return
to the user space for pretty print etc.
The llvm patch at https://reviews.llvm.org/D53736
will generate .BTF section and one more section .BTF.ext.
The .BTF.ext section encodes function type
information and line information. Note that
this patch set only supports function type info.
The functionality is implemented in libbpf.
The .BTF section can be directly loaded into the
kernel, and the .BTF.ext section cannot. The loader
may need to do some relocation and merging,
similar to merging multiple code sections, before
loading into the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new fields are added for program load in lib/bpf so
application uses api bpf_load_program_xattr() is able
to load program with btf and func_info data.
This functionality will be used in next patch
by bpf selftest test_btf.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds unit tests for BTF_KIND_FUNC_PROTO and
BTF_KIND_FUNC to test_btf.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since commit 88cda1c9da ("bpf: libbpf: Provide basic API support
to specify BPF obj name"), libbpf unconditionally sets bpf_attr->name
for maps. Pre v4.14 kernels don't know about map names and return an
error about unexpected non-zero data. Retry sys_bpf without a map
name to cover older kernels.
v2 changes:
* check for errno == EINVAL as suggested by Daniel Borkmann
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch restores the behavior in
commit eac7d84519 ("tools: libbpf: don't return '.text' as a program for multi-function programs")
such that bpf_program__next() does not return pseudo programs in ".text".
Fixes: 0c19a9fbc9 ("libbpf: cleanup after partial failure in bpf_object__pin")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
pin_name is the same as section_name where '/' is replaced
by '_'. bpf_object__pin_programs is converted to use pin_name
to avoid the situation where section_name would require creating another
subdirectory for a pin (as, for example, when calling bpf_object__pin_programs
for programs in sections like "cgroup/connect6").
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When bpf_program has only one instance, don't create a subdirectory with
per-instance pin files (<prog>/0). Instead, just create a single pin file
for that single instance. This simplifies object pinning by not creating
unnecessary subdirectories.
This can potentially break existing users that depend on the case
where '/0' is always created. However, I couldn't find any serious
usage of bpf_program__pin inside the kernel tree and I suppose there
should be none outside.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpftool will use bpf_object__pin in the next commits to pin all programs
and maps from the file; in case of a partial failure, we need to get
back to the clean state (undo previous program/map pins).
As part of a cleanup, I've added and exported separate routines to
pin all maps (bpf_object__pin_maps) and progs (bpf_object__pin_programs)
of an object.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Arnaldo Carvalho de Melo reported build error in libbpf when clang
version 3.8.1-24 (tags/RELEASE_381/final) is used:
libbpf.c:2201:36: error: comparison of constant -22 with expression of
type 'const enum bpf_attach_type' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
if (section_names[i].attach_type == -EINVAL)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~
1 error generated.
Fix the error by keeping "is_attachable" property of a program in a
separate struct field instead of trying to use attach_type itself.
Fixes: 956b620fcf ("libbpf: Introduce libbpf_attach_type_by_name")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Simplify bpf_perf_event_read_simple() a bit and fix up some minor
things along the way: the return code in the header is not of type
int but enum bpf_perf_event_ret instead. Once callback indicated
to break the loop walking event data, it also needs to be consumed
in data_tail since it has been processed already.
Moreover, bpf_perf_event_print_t callback should avoid void * as
we actually get a pointer to struct perf_event_header and thus
applications can make use of container_of() to have type checks.
The walk also doesn't have to use modulo op since the ring size is
required to be power of two.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given libbpf is a generic library and not restricted to x86-64 only,
the compiler barrier in bpf_perf_event_read_simple() after fetching
the head needs to be replaced with smp_rmb() at minimum. Also, writing
out the tail we should use WRITE_ONCE() to avoid store tearing.
Now that we have the logic in place in ring_buffer_read_head() and
ring_buffer_write_tail() helper also used by perf tool which would
select the correct and best variant for a given architecture (e.g.
x86-64 can avoid CPU barriers entirely), make use of these in order
to fix bpf_perf_event_read_simple().
Fixes: d0cabbb021 ("tools: bpf: move the event reading loop to libbpf")
Fixes: 39111695b1 ("samples: bpf: add bpf_perf_event_output example")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_maps:
Tests that queue/stack maps are behaving correctly even in corner cases
test_progs:
Tests new ebpf helpers
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make global symbols in libbpf DSO hidden by default with
-fvisibility=hidden and export symbols that are part of ABI explicitly
with __attribute__((visibility("default"))).
This is common practice that should prevent from accidentally exporting
a symbol, that is not supposed to be a part of ABI what, in turn,
improves both libbpf developer- and user-experiences. See [1] for more
details.
Export control becomes more important since more and more projects use
libbpf.
The patch doesn't export a bunch of netlink related functions since as
agreed in [2] they'll be reworked. That doesn't break bpftool since
bpftool links libbpf statically.
[1] https://www.akkadia.org/drepper/dsohowto.pdf (2.2 Export Control)
[2] https://www.mail-archive.com/netdev@vger.kernel.org/msg251434.html
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Multiple map definition structures exist and user may have non-zero
fields in their definition that are not recognized by bpftool and
libbpf. The normal behavior is to then fail loading the map. Although
this is a good default behavior users may still want to load the map
for debugging or other reasons. This patch adds a --mapcompat flag
that can be used to override the default behavior and allow loading
the map even when it has additional non-zero fields.
For now the only user is 'bpftool prog' we can switch over other
subcommands as needed. The library exposes an API that consumes
a flags field now but I kept the original API around also in case
users of the API don't want to expose this. The flags field is an
int in case we need more control over how the API call handles
errors/features/etc in the future.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use __u32 instead u32 in libbpf.c and also use
uapi perf_event.h instead of tools/perf/perf-sys.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
libbpf is maturing as a library and gaining features that no other bpf libraries support
(BPF Type Format, bpf to bpf calls, etc)
Many Apache2 licensed projects (like bcc, bpftrace, gobpf, cilium, etc)
would like to use libbpf, but cannot do this yet, since Apache Foundation explicitly
states that LGPL is incompatible with Apache2.
Hence let's relicense libbpf as dual license LGPL-2.1 or BSD-2-Clause,
since BSD-2 is compatible with Apache2.
Dual LGPL or Apache2 is invalid combination.
Fix license mistake in Makefile as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Beckett <david.beckett@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make bpf_program__load consistent with other interfaces: use __u32
instead of u32. That in turn fixes build of samples:
In file included from ./samples/bpf/trace_output_user.c:21:0:
./tools/lib/bpf/libbpf.h:132:9: error: unknown type name ‘u32’
u32 kern_version);
^
Fixes: commit 29cd77f416 ("libbpf: Support loading individual progs")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rename include guards to have consistent names "__LIBBPF_<header_name>".
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf is used more and more outside kernel tree. That means the library
should follow good practices in library design and implementation to
play well with third party code that uses it.
One of such practices is to have a common prefix (or a few) for every
interface, function or data structure, library provides. I helps to
avoid name conflicts with other libraries and keeps API consistent.
Inconsistent names in libbpf already cause problems in real life. E.g.
an application can't use both libbpf and libnl due to conflicting
symbols.
Having common prefix will help to fix current and avoid future problems.
libbpf already uses the following prefixes for its interfaces:
* bpf_ for bpf system call wrappers, program/map/elf-object
abstractions and a few other things;
* btf_ for BTF related API;
* libbpf_ for everything else.
The patch renames function in str_error.h to have libbpf_ prefix since it
misses one and doesn't fit well into the first two categories.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf is used more and more outside kernel tree. That means the library
should follow good practices in library design and implementation to
play well with third party code that uses it.
One of such practices is to have a common prefix (or a few) for every
interface, function or data structure, library provides. I helps to
avoid name conflicts with other libraries and keeps API consistent.
Inconsistent names in libbpf already cause problems in real life. E.g.
an application can't use both libbpf and libnl due to conflicting
symbols.
Having common prefix will help to fix current and avoid future problems.
libbpf already uses the following prefixes for its interfaces:
* bpf_ for bpf system call wrappers, program/map/elf-object
abstractions and a few other things;
* btf_ for BTF related API;
* libbpf_ for everything else.
The patch adds libbpf_ prefix to interfaces in nlattr.h that use none of
mentioned above prefixes and doesn't fit well into the first two
categories.
Since affected part of API is used in bpftool, the patch applies
corresponding change to bpftool as well. Having it in a separate patch
will cause a state of tree where bpftool is broken what may not be a
good idea.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf is used more and more outside kernel tree. That means the library
should follow good practices in library design and implementation to
play well with third party code that uses it.
One of such practices is to have a common prefix (or a few) for every
interface, function or data structure, library provides. I helps to
avoid name conflicts with other libraries and keeps API consistent.
Inconsistent names in libbpf already cause problems in real life. E.g.
an application can't use both libbpf and libnl due to conflicting
symbols.
Having common prefix will help to fix current and avoid future problems.
libbpf already uses the following prefixes for its interfaces:
* bpf_ for bpf system call wrappers, program/map/elf-object
abstractions and a few other things;
* btf_ for BTF related API;
* libbpf_ for everything else.
The patch adds libbpf_ prefix to functions and typedef in libbpf.h that
use none of mentioned above prefixes and doesn't fit well into the first
two categories.
Since affected part of API is used in bpftool, the patch applies
corresponding change to bpftool as well. Having it in a separate patch
will cause a state of tree where bpftool is broken what may not be a
good idea.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This typedef is used only by implementation in netlink.c. Nothing uses
it in public API. Move it to netlink.c.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Allow the individual program load to be invoked. This will help with
testing, where a single ELF may contain several sections, some of which
denote subprograms that are expected to fail verification, along with
some which are expected to pass verification. By allowing programs to be
iterated and individually loaded, each program can be independently
checked against its expected verification result.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add section names for BPF_SK_SKB_STREAM_PARSER and
BPF_SK_SKB_STREAM_VERDICT attach types to be able to identify them in
libbpf_attach_type_by_name.
"stream_parser" and "stream_verdict" are used instead of simple "parser"
and "verdict" just to avoid possible confusion in a place where attach
type is used alone (e.g. in bpftool's show sub-commands) since there is
another attach point that can be named as "verdict": BPF_SK_MSG_VERDICT.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add section names for BPF_CGROUP_INET_INGRESS and BPF_CGROUP_INET_EGRESS
attach types to be able to identify them in libbpf_attach_type_by_name.
"cgroup_skb" is used instead of "cgroup/skb" mostly to easy possible
unifying of how libbpf and bpftool works with section names:
* bpftool uses "cgroup_skb" to in "prog list" sub-command;
* bpftool uses "ingress" and "egress" in "cgroup list" sub-command;
* having two parts instead of three in a string like "cgroup_skb/ingress"
can be leveraged to split it to prog_type part and attach_type part,
or vise versa: use two parts to make a section name.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is a common use-case when ELF object contains multiple BPF
programs and every program has its own section name. If it's cgroup-bpf
then programs have to be 1) loaded and 2) attached to a cgroup.
It's convenient to have information necessary to load BPF program
together with program itself. This is where section name works fine in
conjunction with libbpf_prog_type_by_name that identifies prog_type and
expected_attach_type and these can be used with BPF_PROG_LOAD.
But there is currently no way to identify attach_type by section name
and it leads to messy code in user space that reinvents guessing logic
every time it has to identify attach type to use with BPF_PROG_ATTACH.
The patch introduces libbpf_attach_type_by_name that guesses attach type
by section name if a program can be attached.
The difference between expected_attach_type provided by
libbpf_prog_type_by_name and attach_type provided by
libbpf_attach_type_by_name is the former is used at BPF_PROG_LOAD time
and can be zero if a program of prog_type X has only one corresponding
attach type Y whether the latter provides specific attach type to use
with BPF_PROG_ATTACH.
No new section names were added to section_names array. Only existing
ones were reorganized and attach_type was added where appropriate.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-09-25
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow for RX stack hardening by implementing the kernel's flow
dissector in BPF. Idea was originally presented at netconf 2017 [0].
Quote from merge commit:
[...] Because of the rigorous checks of the BPF verifier, this
provides significant security guarantees. In particular, the BPF
flow dissector cannot get inside of an infinite loop, as with
CVE-2013-4348, because BPF programs are guaranteed to terminate.
It cannot read outside of packet bounds, because all memory accesses
are checked. Also, with BPF the administrator can decide which
protocols to support, reducing potential attack surface. Rarely
encountered protocols can be excluded from dissection and the
program can be updated without kernel recompile or reboot if a
bug is discovered. [...]
Also, a sample flow dissector has been implemented in BPF as part
of this work, from Petar and Willem.
[0] http://vger.kernel.org/netconf2017_files/rx_hardening_and_udp_gso.pdf
2) Add support for bpftool to list currently active attachment
points of BPF networking programs providing a quick overview
similar to bpftool's perf subcommand, from Yonghong.
3) Fix a verifier pruning instability bug where a union member
from the register state was not cleared properly leading to
branches not being pruned despite them being valid candidates,
from Alexei.
4) Various smaller fast-path optimizations in XDP's map redirect
code, from Jesper.
5) Enable to recognize BPF_MAP_TYPE_REUSEPORT_SOCKARRAY maps
in bpftool, from Roman.
6) Remove a duplicate check in libbpf that probes for function
storage, from Taeung.
7) Fix an issue in test_progs by avoid checking for errno since
on success its value should not be checked, from Mauricio.
8) Fix unused variable warning in bpf_getsockopt() helper when
CONFIG_INET is not configured, from Anders.
9) Fix a compilation failure in the BPF sample code's use of
bpf_flow_keys, from Prashant.
10) Minor cleanups in BPF code, from Yue and Zhong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Same problem that got fixed in a similar fashion in tools/perf/ in
c8b5f2c96d ("tools: Introduce str_error_r()"), fix it in the same
way, licensing needs to be sorted out to libbpf to use libapi, so,
for this simple case, just get the same wrapper in tools/lib/bpf.
This makes libbpf and its users (bpftool, selftests, perf) to build
again in Alpine Linux 3.[45678] and edge.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: 1ce6a9fc15 ("bpf: fix build error in libbpf with EXTRA_CFLAGS="-Wp, -D_FORTIFY_SOURCE=2 -O2"")
Link: https://lkml.kernel.org/r/20180917151636.GA21790@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch extends libbpf and bpftool to work with programs of type
BPF_PROG_TYPE_FLOW_DISSECTOR.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit f7010770fb ("tools/bpf: move bpf/lib netlink related
functions into a new file") introduced a while loop for the
netlink recv path. This while loop is needed since the
buffer in recv syscall may not be enough to hold all the
information and in such cases multiple recv calls are needed.
There is a bug introduced by the above commit as
the while loop may block on recv syscall if there is no
more messages are expected. The netlink message header
flag NLM_F_MULTI is used to indicate that more messages
are expected and this patch fixed the bug by doing
further recv syscall only if multipart message is expected.
The patch added another fix regarding to message length of 0.
When netlink recv returns message length of 0, there will be
no more messages for returning data so the while loop
can end.
Fixes: f7010770fb ("tools/bpf: move bpf/lib netlink related functions into a new file")
Reported-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch added a few netlink attribute parsing functions
and the netlink API functions to query networking links, tc classes,
tc qdiscs and tc filters. For example, the following API is
to get networking links:
int nl_get_link(int sock, unsigned int nl_pid,
dump_nlmsg_t dump_link_nlmsg,
void *cookie);
Note that when the API is called, the user also provided a
callback function with the following signature:
int (*dump_nlmsg_t)(void *cookie, void *msg, struct nlattr **tb);
The "cookie" is the parameter the user passed to the API and will
be available for the callback function.
The "msg" is the information about the result, e.g., ifinfomsg or
tcmsg. The "tb" is the parsed netlink attributes.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are no functionality change for this patch.
In the subsequent patches, more netlink related library functions
will be added and a separate file is better than cluttering bpf.c.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After the commit eac7d84519 ("tools: libbpf: don't return '.text'
as a program for multi-function programs"), bpf_program__next()
in bpf_object__for_each_program skips the function storage such as .text,
so eliminate the duplicate checking.
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-13
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add driver XDP support for veth. This can be used in conjunction with
redirect of another XDP program e.g. sitting on NIC so the xdp_frame
can be forwarded to the peer veth directly without modification,
from Toshiaki.
2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
in order to provide more control and visibility on where a SO_REUSEPORT
sk should be located, and the latter enables to directly select a sk
from the bpf map. This also enables map-in-map for application migration
use cases, from Martin.
3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
of cgroup v2 that is the ancestor of the cgroup associated with the
skb at the ancestor_level, from Andrey.
4) Implement BPF fs map pretty-print support based on BTF data for regular
hash table and LRU map, from Yonghong.
5) Decouple the ability to attach BTF for a map from the key and value
pretty-printer in BPF fs, and enable further support of BTF for maps for
percpu and LPM trie, from Daniel.
6) Implement a better BPF sample of using XDP's CPU redirect feature for
load balancing SKB processing to remote CPU. The sample implements the
same XDP load balancing as Suricata does which is symmetric hash based
on IP and L4 protocol, from Jesper.
7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
critical path as it is ensured that the allocator is present, from Björn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add tests for the new BPF_PROG_TYPE_SK_REUSEPORT.
The tests cover:
- IPv4/IPv6 + TCP/UDP
- TCP syncookie
- TCP fastopen
- Cases when the bpf_sk_select_reuseport() returning errors
- Cases when the bpf prog returns SK_DROP
- Values from sk_reuseport_md
- outer_map => reuseport_array
The test depends on
commit 3eee1f75f2 ("bpf: fix bpf_skb_load_bytes_relative pkt length check")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds tests for the new BPF_MAP_TYPE_REUSEPORT_SOCKARRAY.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-07
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add cgroup local storage for BPF programs, which provides a fast
accessible memory for storing various per-cgroup data like number
of transmitted packets, etc, from Roman.
2) Support bpf_get_socket_cookie() BPF helper in several more program
types that have a full socket available, from Andrey.
3) Significantly improve the performance of perf events which are
reported from BPF offload. Also convert a couple of BPF AF_XDP
samples overto use libbpf, both from Jakub.
4) seg6local LWT provides the End.DT6 action, which allows to
decapsulate an outer IPv6 header containing a Segment Routing Header.
Adds this action now to the seg6local BPF interface, from Mathieu.
5) Do not mark dst register as unbounded in MOV64 instruction when
both src and dst register are the same, from Arthur.
6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
instructions on arm64 for the AF_XDP sample code, from Brian.
7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
over from Python 2 to Python 3, from Jeremy.
8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.
9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.
10) Several improvements to the README.rst from the BPF documentation
to make it more consistent with RST format, from Tobin.
11) Replace all occurrences of strerror() by calls to strerror_r()
in libbpf and fix a FORTIFY_SOURCE build error along with it,
from Thomas.
12) Fix a bug in bpftool's get_btf() function to correctly propagate
an error via PTR_ERR(), from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the tools/lib/bpf/btf.[ch] to LGPL which
is inline with libbpf also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
commit 38d5d3b3d5 ("bpf: Introduce BPF_ANNOTATE_KV_PAIR")
added to the bpf and net trees what
commit 92b57121ca ("bpf: btf: export btf types and name by offset from lib")
has already added to bpf-next/net-next, but in slightly different
location. Remove the duplicates (to fix build of libbpf).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 531b014e7a ("tools: bpf: make use of reallocarray") causes
a compiler error when building the perf tool in the linux-next tree.
Compile file tools/lib/bpf/libbpf.c on a FEDORA 28 installation with
gcc compiler version: gcc (GCC) 8.0.1 20180324 (Red Hat 8.0.1-0.20)
shows this error message:
[root@p23lp27] # make V=1 EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2"
[...]
make -f /home6/tmricht/linux-next/tools/build/Makefile.build
dir=./util/scripting-engines obj=libperf
libbpf.c: In function ‘bpf_object__elf_collect’:
libbpf.c:811:15: error: ignoring return value of ‘strerror_r’,
declared with attribute warn_unused_result [-Werror=unused-result]
strerror_r(-err, errmsg, sizeof(errmsg));
^
cc1: all warnings being treated as errors
mv: cannot stat './.libbpf.o.tmp': No such file or directory
/home6/tmricht/linux-next/tools/build/Makefile.build:96: recipe for target 'libbpf.o' failed
Replace all occurrences of strerror() by calls to strerror_r(). To
keep the compiler quiet also use the return value from strerror_r()
otherwise a 'variable set but not use' warning which is treated as
error terminates the compile.
Fixes: 531b014e7a ("tools: bpf: make use of reallocarray")
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In linux-next tree compiling the perf tool with additional make flags
EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2" causes a compiler error.
It is the warning 'variable may be used uninitialized' which is treated
as error: I compile it using a FEDORA 28 installation, my gcc compiler
version: gcc (GCC) 8.0.1 20180324 (Red Hat 8.0.1-0.20). The file that
causes the error is tools/lib/bpf/libbpf.c.
[root@p23lp27] # make V=1 EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2"
[...]
Makefile.config:849: No openjdk development package found, please
install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h'
differs from latest version at 'include/uapi/linux/if_link.h'
CC libbpf.o
libbpf.c: In function ‘bpf_perf_event_read_simple’:
libbpf.c:2342:6: error: ‘ret’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
int ret;
^
cc1: all warnings being treated as errors
mv: cannot stat './.libbpf.o.tmp': No such file or directory
/home6/tmricht/linux-next/tools/build/Makefile.build:96: recipe for target 'libbpf.o' failed
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Allow users to find programs by section names.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_map__fd() handles NULL map gracefully and returns -EINVAL.
bpf_program__fd() and bpf_program__nth_fd() crash in this case.
Make the behaviour more consistent by validating prog pointer
as well.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch introduces BPF_ANNOTATE_KV_PAIR to signal the
bpf loader about the btf key_type and value_type of a bpf map.
Please refer to the changes in test_btf_haskv.c for its usage.
Both iproute2 and libbpf loader will then have the same
convention to find out the map's btf_key_type_id and
btf_value_type_id from a map's name.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch replaces [u]int32_t and [u]int64_t usage with
__[su]32 and __[su]64. The same change goes for [u]int16_t
and [u]int8_t.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch introduces btf__resolve_type() function and exports two
existing functions from libbpf. btf__resolve_type follows modifier
types like const and typedef until it hits a type which actually takes
up memory, and then returns it. This function follows similar pattern
to btf__resolve_size but instead of computing size, it just returns
the type.
These functions will be used in the followig patch which parses
information inside array of `struct btf_type *`. btf_name_by_offset is
used for printing variable names.
Signed-off-by: Okash Khawaja <osk@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
More advanced applications may want to only replace programs without
destroying associated maps. Allow libbpf users to achieve that.
Instead of always creating all of the maps at load time, expose to
users an API to reconstruct the map object from already existing
map.
The map parameters are read from the kernel and replace the parameters
of the ELF map. libbpf does not restrict the map replacement, i.e.
the reused map does not have to be compatible with the ELF map
definition. We relay on the verifier for checking the compatibility
between maps and programs. The ELF map definition is completely
overwritten by the information read from the kernel, to make sure
libbpf's view of map object corresponds to the actual map.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
reallocarray() is a safer variant of realloc which checks for
multiplication overflow in case of array allocation. Since it's
not available in Glibc < 2.26 import kernel's overflow.h and
add a static inline implementation when needed. Use feature
detection to probe for existence of reallocarray.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf_strerror() depends on XSI-compliant (POSIX) version of
strerror_r(), which prevents us from using GNU-extensions in
libbpf.c, like reallocarray() or dup3(). Move error printing
code into a separate file to allow it to continue using POSIX
strerror_r().
No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Similarly to bpf_prog_load() users of bpf_object__open() may need
to specify the expected program type. Program type is needed at
open to avoid the kernel version check for program types which don't
require it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add helper to libbpf for recognizing maps which should not have
ifindex set when program is loaded. These maps only contain
host metadata and therefore are not marked for offload, e.g.
the perf event map.
Use this helper in bpf_prog_load_xattr().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf can guess program type based on ELF section names. As libbpf
becomes more popular its association between section name strings and
types becomes more of a standard. Allow libbpf users to use the same
logic for matching strings to types, e.g. when the string originates
from command line.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make bpf_program__next() skip over '.text' section if object file
has pseudo calls. The '.text' section is hardly a program in that
case, it's more of a storage for code of functions other than main.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf used to be able to load programs from the default section
called '.text'. It's not very common to leave sections unnamed,
but if it happens libbpf will fail to load the programs reporting
-EINVAL from the kernel. The -EINVAL comes from bpf_obj_name_cpy()
because since 48cca7e44f ("libbpf: add support for bpf_call")
libbpf does not resolve program names for programs in '.text',
defaulting to '.text'. '.text', however, does not pass the
(isalnum(*src) || *src == '_') check in bpf_obj_name_cpy().
With few extra lines of code we can limit the pseudo call
assumptions only to objects which actually contain code relocations.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Users of bpf_object__open()/bpf_object__load() APIs may want to
load the programs and maps onto a device for offload. Allow
setting ifindex on those sub-objects.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Specify default section names for BPF_PROG_TYPE_LIRC_MODE2
and BPF_PROG_TYPE_LWT_SEG6LOCAL, these are the only two
missing right now.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is simple test over rc-loopback.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf can guess prog type and expected attach type based on section
name. Add hints for "cgroup/sendmsg4" and "cgroup/sendmsg6" section
names.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
install_headers target should contain all headers that are part of
libbpf. Add missing btf.h
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-05-24
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sync kernel header bpf.h to tools/include/uapi/linux/bpf.h and
implement bpf_task_fd_query() in libbpf. The test programs
in samples/bpf and tools/testing/selftests/bpf, and later bpftool
will use this libbpf function to query kernel.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.
Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.
Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.
This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.
The BPF program may return 3 types of return codes:
- BPF_OK: the End.BPF action will look up the next destination through
seg6_lookup_nexthop.
- BPF_REDIRECT: if an action has been executed through the
bpf_lwt_seg6_action helper, the BPF program should return this
value, as the skb's destination is already set and the default
lookup should not be performed.
- BPF_DROP : the packet will be dropped.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
On arm32, 'cd tools/testing/selftests/bpf && make' fails with:
libbpf.c:80:10: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int64_t {aka long long int}’ [-Werror=format=]
(func)("libbpf: " fmt, ##__VA_ARGS__); \
^
libbpf.c:83:30: note: in expansion of macro ‘__pr’
#define pr_warning(fmt, ...) __pr(__pr_warning, fmt, ##__VA_ARGS__)
^~~~
libbpf.c:1072:3: note: in expansion of macro ‘pr_warning’
pr_warning("map:%s value_type:%s has BTF type_size:%ld != value_size:%u\n",
To fix, typecast 'key_size' and amend format string.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch does the followings:
1. Modify libbpf and test_btf to reflect the uapi changes in btf
2. Add test for the btf_header changes
3. Add tests for array->index_type
4. Add err_str check to the tests
5. Fix a 4 bytes hole in "struct test #1" by swapping "m" and "n"
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF programs currently can only be offloaded using iproute2. This
patch will allow programs to be offloaded using libbpf calls.
Signed-off-by: David Beckett <david.beckett@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BPF programs only have to specify the target kernel version for
tracing related hooks, in networking world that requirement does
not really apply. Loosen the checks in libbpf to reflect that.
bpf_object__open() users will continue to see the error for backward
compatibility (and because prog_type is not available there).
Error code for NULL file name is changed from ENOENT to EINVAL,
as it seems more appropriate, hopefully, that's an OK change.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix spelling mistakes, improve and clarify the language of comments
in libbpf.h.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are two copies of event reading loop - in bpftool and
trace_helpers "library". Consolidate them and move the code
to libbpf. Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds test for BPF_BTF_GET_FD_BY_ID and the new
btf_id/btf_key_id/btf_value_id in the "struct bpf_map_info".
It also modifies the existing BPF_OBJ_GET_INFO_BY_FD test
to reflect the new "struct bpf_btf_info".
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds a new test program test_sockmap which is the old sample
sockmap program. By moving the sample program here we can now run it
as part of the self tests suite. To support this a populate_progs()
routine is added to load programs and maps which was previously done
with load_bpf_file(). This is needed because self test libs do not
provide a similar routine. Also we now use the cgroup_helpers
routines to manage cgroup use instead of manually creating one and
supplying it to the CLI.
Notice we keep the CLI around though because it is useful for dbg
and specialized testing.
To run use ./test_sockmap and the result should be,
Summary 660 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch cleans up btf.h in uapi:
1) Rename "name" to "name_off" to better reflect it is an offset to the
string section instead of a char array.
2) Remove unused value BTF_FLAGS_COMPR and BTF_MAGIC_SWAP
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 8a138aed4a ("bpf: btf: Add BTF support to libbpf") did not
include stdbool.h, so GCC complained when building samples/bpf/.
In file included from /home/btopel/src/ext/linux/samples/bpf/libbpf.h:6:0,
from /home/btopel/src/ext/linux/samples/bpf/test_lru_dist.c:24:
/home/btopel/src/ext/linux/tools/lib/bpf/bpf.h:105:4: error: unknown type name ‘bool’; did you mean ‘_Bool’?
bool do_log);
^~~~
_Bool
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If the ".BTF" elf section exists, libbpf will try to create
a btf_fd (through BPF_BTF_LOAD). If that fails, it will still
continue loading the bpf prog/map without the BTF.
If the bpf_object has a BTF loaded, it will create a map with the btf_fd.
libbpf will try to figure out the btf_key_id and btf_value_id of a map by
finding the BTF type with name "<map_name>_key" and "<map_name>_value".
If they cannot be found, it will continue without using the BTF.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add missing pieces for BPF_PROG_TYPE_RAW_TRACEPOINT in libbpf:
* is- and set- functions;
* support guessing prog type.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf can guess prog type and expected attach type based on section
name. Add hints for "cgroup/post_bind4" and "cgroup/post_bind6" section
names.
Existing "cgroup/sock" is not changed, i.e. expected_attach_type for it
is not set to `BPF_CGROUP_INET_SOCK_CREATE`, for backward compatibility.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add selftest to work with bpf_sock_addr context from
`BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs.
Try to bind(2) on IP:port and apply:
* loads to make sure context can be read correctly, including narrow
loads (byte, half) for IP and full-size loads (word) for all fields;
* stores to those fields allowed by verifier.
All combination from IPv4/IPv6 and TCP/UDP are tested.
Both scenarios are tested:
* valid programs can be loaded and attached;
* invalid programs can be neither loaded nor attached.
Test passes when expected data can be read from context in the
BPF-program, and after the call to bind(2) socket is bound to IP:port
pair that was written by BPF-program to the context.
Example:
# ./test_sock_addr
Attached bind4 program.
Test case #1 (IPv4/TCP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Test case #2 (IPv4/UDP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Attached bind6 program.
Test case #3 (IPv6/TCP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
Test case #4 (IPv6/UDP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
### SUCCESS
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Support setting `expected_attach_type` at prog load time in both
`bpf/bpf.h` and `bpf/libbpf.h`.
Since both headers already have API to load programs, new functions are
added not to break backward compatibility for existing ones:
* `bpf_load_program_xattr()` is added to `bpf/bpf.h`;
* `bpf_prog_load_xattr()` is added to `bpf/libbpf.h`.
Both new functions accept structures, `struct bpf_load_program_attr` and
`struct bpf_prog_load_attr` correspondingly, where new fields can be
added in the future w/o changing the API.
Standard `_xattr` suffix is used to name the new API functions.
Since `bpf_load_program_name()` is not used as heavily as
`bpf_load_program()`, it was removed in favor of more generic
`bpf_load_program_xattr()`.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
add bpf_raw_tracepoint_open(const char *name, int prog_fd) api to libbpf
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sockmap option to use SK_MSG program types.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes a GCC maybe-uninitialized warning introduced by 48cca7e44f.
"text" is only initialized inside the if statement so only print debug
info there.
Fixes: 48cca7e44f ("libbpf: add support for bpf_call")
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
V3: More generic skipping of relo-section (suggested by Daniel)
If clang >= 4.0.1 is missing the option '-target bpf', it will cause
llc/llvm to create two ELF sections for "Exception Frames", with
section names '.eh_frame' and '.rel.eh_frame'.
The BPF ELF loader library libbpf fails when loading files with these
sections. The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c,
handle this gracefully. And iproute2 loader also seems to work with these
"eh" sections.
The issue in libbpf is caused by bpf_object__elf_collect() skipping
some sections, and later when performing relocation it will be
pointing to a skipped section, as these sections cannot be found by
bpf_object__find_prog_by_idx() in bpf_object__collect_reloc().
This is a general issue that also occurs for other sections, like
debug sections which are also skipped and can have relo section.
As suggested by Daniel. To avoid keeping state about all skipped
sections, instead perform a direct qlookup in the ELF object. Lookup
the section that the relo-section points to and check if it contains
executable machine instructions (denoted by the sh_flags
SHF_EXECINSTR). Use this check to also skip irrelevant relo-sections.
Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used
due to incompatibility with asm embedded headers, that some of the samples
include. This is explained in more details by Yonghong Song in bpf_devel_QA.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
While debugging a bpf ELF loading issue, I needed to correlate the
ELF section number with the failed relocation section reference.
Thus, add section numbers/index to the pr_debug.
In debug mode, also print section that were skipped. This helped
me identify that a section (.eh_frame) was skipped, and this was
the reason the relocation section (.rel.eh_frame) could not find
that section number.
The section numbers corresponds to the readelf tools Section Headers [Nr].
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It seems that the type guessing feature for libbpf, based on the name of
the ELF section the program is located in, was inspired from
samples/bpf/prog_load.c, which was not used by any sample for loading
programs of certain types such as TC actions and classifiers, or
LWT-related types. As a consequence, libbpf is not able to guess the
type of such programs and to load them automatically if type is not
provided to the `bpf_load_prog()` function.
Add ELF section names associated to those eBPF program types so that
they can be loaded with e.g. bpftool as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Parse netlink ext attribute to get the error message returned by
the card. Code is partially take from libnl.
We add netlink.h to the uapi include of tools. And we need to
avoid include of userspace netlink header to have a successful
build of sample so nlattr.h has a define to avoid
the inclusion. Using a direct define could have been an issue
as NLMSGERR_ATTR_MAX can change in the future.
We also define SOL_NETLINK if not defined to avoid to have to
copy socket.h for a fixed value.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Most of the code is taken from set_link_xdp_fd() in bpf_load.c and
slightly modified to be library compliant.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The headers are necessary for libbpf compilation on system with older
version of the headers.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The third parameter to do_install was not used by $(INSTALL) command.
Fix this by only setting the -m option when the third parameter is supplied.
The use of a third parameter was introduced in commit eb54e522a0 ("bpf:
install libbpf headers on 'make install'").
Without this change, the header files are install as executables files (755).
Fixes: eb54e522a0 ("bpf: install libbpf headers on 'make install'")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The plugin_dir_SQ variable is not used, remove it.
The function update_dir is also unused, remove it.
The variable $VERSION_FILES is empty, remove it.
These all originates from the introduction of the Makefile, and is likely a copy paste
from tools/lib/traceevent/Makefile.
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It seems like an oversight not to install the header file for libbpf,
given the libbpf.so + libbpf.a files are installed.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf is able to deduce the type of a program from the name of the ELF
section in which it is located. However, the comparison is made on the
first n characters, n being determined with sizeof() applied to the
reference string (e.g. "xdp"). When such section names are supposed to
receive a suffix separated with a slash (e.g. "kprobe/"), using sizeof()
takes the final NUL character of the reference string into account,
which implies that both strings must be equal. Instead, the desired
behaviour would consist in taking the length of the string, *without*
accounting for the ending NUL character, and to make sure the reference
string is a prefix to the ELF section name.
Subtract 1 to the total size of the string for obtaining the length for
the comparison.
Fixes: 583c90097f ("libbpf: add ability to guess program type based on section name")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
These elf object pieces are of type Elf64_Xword and therefore could be
"long long" on some builds.
Cast to "long long" and use printf format %lld to deal with this since
we are building with -Werror=format.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
/bin/sh's exit does not recognize -1 as a number, leading to
the following error message:
/bin/sh: 1: exit: Illegal number: -1
Use 1 as the exit code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- recognize relocation emitted by llvm
- since all regular function will be kept in .text section and llvm
takes care of pc-relative offsets in bpf_call instruction
simply copy all of .text to relevant program section while adjusting
bpf_call instructions in program section to point to newly copied
body of instructions from .text
- do so for all programs in the elf file
- set all programs types to the one passed to bpf_prog_load()
Note for elf files with multiple programs that use different
functions in .text section we need to do 'linker' style logic.
This work is still TBD
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Libbpf picks the name of the first symbol in the corresponding
elf section to use as a program name. But without taking symbol's
scope into account it may end's up with some local label
as a program name. E.g.:
$ bpftool prog
1: type 15 name LBB0_10 tag 0390a5136ba23f5c
loaded_at Dec 07/17:22 uid 0
xlated 456B not jited memlock 4096B
Fix this by preferring global symbols as program name.
For instance:
$ bpftool prog
1: type 15 name bpf_prog1 tag 0390a5136ba23f5c
loaded_at Dec 07/17:26 uid 0
xlated 456B not jited memlock 4096B
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The bpf_prog_load() function will guess program type if it's not
specified explicitly. This functionality will be used to implement
loading of different programs without asking a user to specify
the program type. In first order it will be used by bpftool.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is required to use BPF_MAP_TYPE_LPM_TRIE or any other map type
which requires flags.
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This library previously assumed a fixed-size map options structure.
Any new options were ignored. In order to allow the options structure
to grow and to support parsing older programs, this patch updates
the maps section parsing to handle varying sizes.
Object files with maps sections smaller than expected will have the new
fields initialized to zero. Object files which have larger than expected
maps sections will be rejected unless all of the unrecognized data is zero.
This change still assumes that each map definition in the maps section
is the same size.
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
add support for BPF_PROG_QUERY command to libbpf
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
introduce bpf_prog_detach2() that takes one more argument prog_fd
vs bpf_prog_detach() that takes only attach_fd and type.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the libbpf to provide API support to
allow specifying BPF object name.
In tools/lib/bpf/libbpf, the C symbol of the function
and the map is used. Regarding section name, all maps are
under the same section named "maps". Hence, section name
is not a good choice for map's name. To be consistent with
map, bpf_prog also follows and uses its function symbol as
the prog's name.
This patch adds logic to collect function's symbols in libbpf.
There is existing codes to collect the map's symbols and no change
is needed.
The bpf_load_program_name() and bpf_map_create_name() are
added to take the name argument. For the other bpf_map_create_xxx()
variants, a name argument is directly added to them.
In samples/bpf, bpf_load.c in particular, the symbol is also
used as the map's name and the map symbols has already been
collected in the existing code. For bpf_prog, bpf_load.c does
not collect the function symbol name. We can consider to collect
them later if there is a need to continue supporting the bpf_load.c.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.
However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.
BPF_SK_SKB_STREAM_PARSER
BPF_SK_SKB_STREAM_VERDICT
This has the advantage of having a readable name and can easily be
extended in the future.
Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes the needed changes to allow each process of
the INNER_LRU_HASH_PREALLOC test to provide its numa node id
when creating the lru map.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Makefile verifies the same file exists twice:
test -f ../../../include/uapi/linux/bpf.h -a \
-f ../../../include/uapi/linux/bpf.h
The purpose of the check is to ensure the diff (immediately after the
test) doesn't fail with these two files:
tools/include/uapi/linux/bpf.h
include/uapi/linux/bpf.h
Same recipe for bpf_common:
test -f ../../../include/uapi/linux/bpf_common.h -a \
-f ../../../include/uapi/linux/bpf_common.h
This corrects the location of the tests.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1502814810-960-1-git-send-email-daniel.diaz@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This generates a set of sockets, attaches BPF programs, and sends some
simple traffic using basic send/recv pattern. Additionally, we do a bunch
of negative tests to ensure adding/removing socks out of the sockmap fail
correctly.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This program binds a program to a cgroup and then matches hard
coded IP addresses and adds these to a sockmap.
This will receive messages from the backend and send them to
the client.
client:X <---> frontend:10000 client:X <---> backend:10001
To keep things simple this is only designed for 1:1 connections
using hard coded values. A more complete example would allow many
backends and clients.
To run,
# sockmap <cgroup2_dir>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User visible:
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events.
This was done by using scripts that extract the information from
the UAPI headers, generating string tables that are then used in
the 'perf trace' syscall argument ioctl beautifier.
More work needed to further use it, for instance, to use the
_IOC_DIR value where it is used sanely to suppress the third
argument, to set formatters for non-pointer values and ultimately
for using eBPF + pahole-like code to collect + beautify structs in
the third arg.
Using the current scheme of having tools/ copies of kernel headers
we'll make sure tooling stays working when changes are made to the
kernel ABI headers and will be notified when they get changed,
reducing the time for 'perf trace' to support new ABIs and allowing
the tools/perf/ codebase to have the definitions it needs to
build in dozens of distros/versions, as routinely tested using
containers for, at this time, 47 environments. (Arnaldo Carvalho de Melo)
Infrastructure
- Clarify header version warning message (Ingo Molnar)
- Sync kernel ABI headers with tooling headers (Ingo Molnar, Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=C6F5
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.14-20170801' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events.
This was done by using scripts that extract the information from
the UAPI headers, generating string tables that are then used in
the 'perf trace' syscall argument ioctl beautifier.
More work needed to further use it, for instance, to use the
_IOC_DIR value where it is used sanely to suppress the third
argument, to set formatters for non-pointer values and ultimately
for using eBPF + pahole-like code to collect + beautify structs in
the third arg.
Using the current scheme of having tools/ copies of kernel headers
we'll make sure tooling stays working when changes are made to the
kernel ABI headers and will be notified when they get changed,
reducing the time for 'perf trace' to support new ABIs and allowing
the tools/perf/ codebase to have the definitions it needs to
build in dozens of distros/versions, as routinely tested using
containers for, at this time, 47 environments. (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Clarify header version warning message (Ingo Molnar)
- Sync kernel ABI headers with tooling headers (Ingo Molnar, Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.
The TCP conflict was a case of local variables in a function
being removed from both net and net-next.
In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.
Signed-off-by: David S. Miller <davem@davemloft.net>
The BPF feature test as well as libbpf is missing the __NR_bpf
define for s390 and currently refuses to compile (selftest suite
depends on libbpf as well). Similar issue was fixed some time
ago via b0c47807d3 ("bpf: Add sparc support to tools and
samples."), just do the same and add definitions.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <davem@davemloft.net>
In this patch we changed the header checks:
perf build: Clarify header version warning message
Unfortunately the header checks were copied to various places and thus the message got
out of sync. Fix some of them here.
Note that there's still old, misleading messages remaining in:
tools/objtool/Makefile: || echo "warning: objtool: x86 instruction decoder differs from kernel" >&2 )) || true
tools/objtool/Makefile: || echo "warning: objtool: orc_types.h differs from kernel" >&2 )) || true
here objtool copied the perf message, plus:
tools/perf/util/intel-pt-decoder/Build: || echo "Warning: Intel PT: x86 instruction decoder differs from kernel" >&2 )) || true
here the PT code regressed over the original message and only emits a vague warning
instead of specific file names...
All of this should be consolidated into tools/Build/ and used in a consistent
manner.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730095130.bblldwxjz5hamybb@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The buffer passed to bpf_obj_get_info_by_fd() should be initialized
to zeros. Kernel will enforce that to guarantee we can safely extend
info structures in the future.
Making the bpf_obj_get_info_by_fd() call in libbpf perform the zeroing
is problematic, however, since some members of the info structures
may need to be initialized by the callers (for instance pointers
to buffers to which kernel is to dump translated and jited images).
Remove the zeroing and fix up the in-tree callers before any kernel
has been released with this code.
As Daniel points out this seems to be the intended operation anyway,
since commit 95b9afd398 ("bpf: Test for bpf ID") is itself setting
the buffer pointers before calling bpf_obj_get_info_by_fd().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new target to install the bpf.h header to $(prefix)/include/bpf/
directory. This is necessary to build standalone applications using
libbpf, without the need to clone the kernel sources and point to them.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the test_verifier case, it's quite hard to parse log level 2 to
figure out what's causing an issue when used to log level 1. We do
want to use bpf_verify_program() in order to simulate some of the
tests with strict alignment. So just add an argument to pass the level
and put it to 1 for test_verifier.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to exercise the bpf_prog/map id generation,
bpf_(prog|map)_get_next_id(), bpf_(prog|map)_get_fd_by_id() and
bpf_get_obj_info_by_fd().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows a test case to load a BPF program and unconditionally
acquire the verifier log.
It also allows specification of the strict alignment flag.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
expose bpf_program__set_type() to set program type
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add support for BPF_PROG_TEST_RUN command to libbpf.a
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test cases for array of maps and hash of maps.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix typos and add the following to the scripts/spelling.txt:
overide||override
While we are here, fix the doubled "address" in the touched line
Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt.
Also, fix the comment block style in the touched hunks in
drivers/media/dvb-frontends/drx39xyj/drx_driver.h.
Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
overrided||overridden
Link: http://lkml.kernel.org/r/1481573103-11329-22-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
Pull perf updates from Ingo Molnar:
"On the kernel side the main changes in this cycle were:
- Add Intel Kaby Lake CPU support (Srinivas Pandruvada)
- AMD uncore driver updates for fam17 (Janakarajan Natarajan)
- Intel/PT updates and core events optimizations and cleanups
(Alexander Shishkin)
- cgroups events fixes (David Carrillo-Cisneros)
- kprobes improvements (Masami Hiramatsu)
- ... plus misc fixes and updates.
On the tooling side the main changes were:
- Support clang build in tools/{perf,lib/{bpf,traceevent,api}} with
CC=clang, to, for instance, take advantage of better warnings
(Arnaldo Carvalho de Melo):
- Introduce the 'delta-abs' 'perf diff' compute method, that orders
the histogram entries by the absolute value of the percentage delta
for a function in two perf.data files, i.e. the functions that
changed the most (increase or decrease in samples) comes first
(Namhyung Kim)
- Add support for parsing Intel uncore vendor event files and add
uncore vendor events for the Intel server processors (Haswell,
Broadwell, IvyBridge), Xeon Phi (Knights Landing) and Broadwell DE
(Andi Kleen)
- Introduce 'perf ftrace' a perf front end to the kernel's ftrace
function and function_graph tracer, defaulting to the
"function_graph" tracer, more work will be done in reviving this
effort, forward porting it from its initial patch submission
(Namhyung Kim)
- Add 'e' and 'c' hotkeys to expand/collapse call chains for a single
hist entry in the 'perf report' and 'perf top' TUI (Jiri Olsa)
- Account thread wait time (off CPU time) separately: sleep, iowait
and preempt, based on the prev_state of the last event, show the
breakdown when using "perf sched timehist --state" (Namhyumg Kim)
- Add more triggers to switch the output file (perf.data.TIMESTAMP).
Now, in addition to switching to a different output file when
receiving a SIGUSR2, one can also specify file size and time based
triggers:
perf record -a --switch-output=signal
is equivalent to what we had before:
perf record -a --switch-output
While we can also ask for the file to be "sliced" by size, taking
into account that that will happen only when we get woken up by the
kernel, i.e. one has to take into account the --mmap-pages (the
size of the perf mmap ring buffer):
perf record -a --switch-output=2G
will break the perf.data output into multiple files limited to 2GB
of samples, right when generating the output.
For time based samples, alert() will be used, so to have 1 minute
limited perf.data output files:
perf record -a --switch-output=1m
(Jiri Olsa)
- Improve 'perf trace' (Arnaldo Carvalho de Melo)
- 'perf kallsyms' toy tool to look for extended symbol information on
the running kernel and demonstrate the machine/thread/symbol APIs
for use in other tools, such as 'perf probe' (Arnaldo Carvalho de
Melo)
- ... plus tons of other changes, see the shortlog and Git log for
details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (131 commits)
perf tools: Add missing parse_events_error() prototype
perf pmu: Fix check for unset alias->unit array
perf tools: Be consistent on the type of map->symbols[] interator
perf intel pt decoder: clang has no -Wno-override-init
perf evsel: Do not put a variable sized type not at the end of a struct
perf probe: Avoid accessing uninitialized 'map' variable
perf tools: Do not put a variable sized type not at the end of a struct
perf record: Do not put a variable sized type not at the end of a struct
perf tests: Synthesize struct instead of using field after variable sized type
perf bench numa: Make sure dprintf() is not defined
Revert "perf bench futex: Sanitize numeric parameters"
tools lib subcmd: Make it an error to pass a signed value to OPTION_UINTEGER
tools: Set the maximum optimization level according to the compiler being used
tools: Suppress request for warning options not existent in clang
samples/bpf: Reset global variables
samples/bpf: Ignore already processed ELF sections
samples/bpf: Add missing header
perf symbols: dso->name is an array, no need to check it against NULL
perf tests record: No need to test an array against NULL
perf symbols: No need to check if sym->name is NULL
...
Remove a useless ifdef __NR_bpf as requested by Wang Nan.
Inline one-line static functions as it was in the bpf_sys.h file.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/828ab1ff-4dcf-53ff-c97b-074adb895006@huawei.com
Acked-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If BPF_F_ALLOW_OVERRIDE flag is used in BPF_PROG_ATTACH command
to the given cgroup the descendent cgroup will be able to override
effective bpf program that was inherited from this cgroup.
By default it's not passed, therefore override is disallowed.
Examples:
1.
prog X attached to /A with default
prog Y fails to attach to /A/B and /A/B/C
Everything under /A runs prog X
2.
prog X attached to /A with allow_override.
prog Y fails to attach to /A/B with default (non-override)
prog M attached to /A/B with allow_override.
Everything under /A/B runs prog M only.
3.
prog X attached to /A with allow_override.
prog Y fails to attach to /A with default.
The user has to detach first to switch the mode.
In the future this behavior may be extended with a chain of
non-overridable programs.
Also fix the bug where detach from cgroup where nothing is attached
was not throwing error. Return ENOENT in such case.
Add several testcases and adjust libbpf.
Fixes: 3007098494 ("cgroup: add support for eBPF programs")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include stddef.h to define size_t.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joe Stringer <joe@ovn.org>
Link: http://lkml.kernel.org/r/20170207205609.8035-2-mic@digikod.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new API to pin a BPF object to the filesystem. The user can
specify the path within a BPF filesystem to pin the object.
Programs will be pinned under a subdirectory named the same as the
program, with each instance appearing as a numbered file under that
directory, and maps will be pinned under the path using the name of
the map as the file basename.
For example, with the directory '/sys/fs/bpf/foo' and a BPF object which
contains two instances of a program named 'bar', and a map named 'baz':
/sys/fs/bpf/foo/bar/0
/sys/fs/bpf/foo/bar/1
/sys/fs/bpf/foo/baz
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-4-joe@ovn.org
[ Check snprintf >= for truncation, as snprintf(bf, size, ...) == size also means truncation ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new API to pin a BPF map to the filesystem. The user can specify
the path full path within a BPF filesystem to pin the map.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-3-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new APIs to pin a BPF program (or specific instances) to the
filesystem. The user can specify the path full path within a BPF
filesystem to pin the program.
bpf_program__pin_instance(prog, path, n) will pin the nth instance of
'prog' to the specified path.
bpf_program__pin(prog, path) will create the directory 'path' (if it
does not exist) and pin each instance within that directory. For
instance, path/0, path/1, path/2.
Committer notes:
- Add missing headers for mkdir()
- Check strdup() for failure
- Check snprintf >= size, not >, as == also means truncated, see 'man
snprintf', return value.
- Conditionally define BPF_FS_MAGIC, as it isn't in magic.h in older
systems and we're not yet having a tools/include/uapi/linux/magic.h
copy.
- Do not include linux/magic.h, not present in older distros.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-2-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will turn a libbpf pointer into a standard error code (or
0 if the pointer is valid).
This also allows removal of the dependency on linux/err.h in the public
header file, which causes problems in userspace programs built against
libbpf.
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170123011128.26534-5-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These bpf_prog_types were exposed in the uapi but there were no
corresponding functions to set these types for programs in libbpf.
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170123011128.26534-4-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Turning this into a macro allows future prog types to be added with a
single line per type.
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170123011128.26534-3-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4708bbda5c ("tools lib bpf: Fix maps resolution") attempted to
fix map resolution by identifying the number of symbols that point to
maps, and using this number to resolve each of the maps.
However, during relocation the original definition of the map size was
still in use. For up to two maps, the calculation was correct if there
was a small difference in size between the map definition in libbpf and
the one that the client library uses. However if the difference was
large, particularly if more than two maps were used in the BPF program,
the relocation would fail.
For example, when using a map definition with size 28, with three maps,
map relocation would count:
(sym_offset / sizeof(struct bpf_map_def) => map_idx)
(0 / 16 => 0), ie map_idx = 0
(28 / 16 => 1), ie map_idx = 1
(56 / 16 => 3), ie map_idx = 3
So, libbpf reports:
libbpf: bpf relocation: map_idx 3 large than 2
Fix map relocation by checking the exact offset of maps when doing
relocation.
Signed-off-by: Joe Stringer <joe@ovn.org>
[Allow different map size in an object]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: netdev@vger.kernel.org
Fixes: 4708bbda5c ("tools lib bpf: Fix maps resolution")
Link: http://lkml.kernel.org/r/20170123011128.26534-2-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"On the kernel side there's two x86 PMU driver fixes and a uprobes fix,
plus on the tooling side there's a number of fixes and some late
updates"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf sched timehist: Fix invalid period calculation
perf sched timehist: Remove hardcoded 'comm_width' check at print_summary
perf sched timehist: Enlarge default 'comm_width'
perf sched timehist: Honour 'comm_width' when aligning the headers
perf/x86: Fix overlap counter scheduling bug
perf/x86/pebs: Fix handling of PEBS buffer overflows
samples/bpf: Move open_raw_sock to separate header
samples/bpf: Remove perf_event_open() declaration
samples/bpf: Be consistent with bpf_load_program bpf_insn parameter
tools lib bpf: Add bpf_prog_{attach,detach}
samples/bpf: Switch over to libbpf
perf diff: Do not overwrite valid build id
perf annotate: Don't throw error for zero length symbols
perf bench futex: Fix lock-pi help string
perf trace: Check if MAP_32BIT is defined (again)
samples/bpf: Make perf_event_read() static
uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation
samples/bpf: Make samples more libbpf-centric
tools lib bpf: Add flags to bpf_create_map()
tools lib bpf: use __u32 from linux/types.h
...
Commit d8c5b17f2b ("samples: bpf: add userspace example for attaching
eBPF programs to cgroups") added these functions to samples/libbpf, but
during this merge all of the samples libbpf functionality is shifting to
tools/lib/bpf. Shift these functions there.
Committer notes:
Use bzero + attr.FIELD = value instead of 'attr = { .FIELD = value, just
like the other wrapper calls to sys_bpf with bpf_attr to make this build
in older toolchais, such as the ones in CentOS 5 and 6.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-au2zvtsh55vqeo3v3uw7jr4c@git.kernel.org
Link: 353e6f298c.patch
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull kbuild updates from Michal Marek:
- prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
about missing CRCs (Nick Piggin)
- asm-exports fix for LTO (Nicolas Pitre)
- thin archives improvements (Nick Piggin)
- linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
Piggin)
- genksyms support for __builtin_va_list keyword
- misc minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: enable modversions for symbols exported from asm
kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
scripts/kallsyms: remove last remnants of --page-offset option
make use of make variable CURDIR instead of calling pwd
kbuild: cmd_export_list: tighten the sed script
kbuild: minor improvement for thin archives build
kbuild: modpost warn if export version crc is missing
kbuild: keep data tables through dead code elimination
kbuild: improve linker compatibility with lib-ksyms.o build
genksyms: Regenerate parser
kbuild/genksyms: handle va_list type
kbuild: thin archives for multi-y targets
kbuild: kallsyms allow 3-pass generation if symbols size has changed
Commit 6c90598174 ("bpf: pre-allocate hash map elements") introduces
map_flags to bpf_attr for BPF_MAP_CREATE command. Expose this new
parameter in libbpf.
By exposing it, users can access flags such as whether or not to
preallocate the map.
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: http://lkml.kernel.org/r/20161209024620.31660-4-joe@ovn.org
[ Added clarifying comment made by Wang Nan ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes the following issue when building without access to 'u32' type:
./tools/lib/bpf/bpf.h:27:23: error: unknown type name ‘u32’
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: http://lkml.kernel.org/r/20161209024620.31660-3-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Add a new API to libbpf, caller is able to get bpf_map through the
offset of bpf_map_def to 'maps' section.
The API will be used to help jitted perf hook code find fd of a map.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-4-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other classes defined in libbpf.h (map and program), allow
'object' class has its own private data.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-3-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add more BPF map operations to libbpf. Also add bpf_obj_{pin,get}(). They
can be used on not only BPF maps but also BPF programs.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-2-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not correct to assimilate the elf data of the maps section to an
array of map definition. In fact the sizes differ. The offset provided
in the symbol section has to be used instead.
This patch fixes a bug causing a elf with two maps not to load
correctly.
Wang Nan added:
This patch requires a name for each BPF map, so array of BPF maps is not
allowed. This restriction is reasonable, because kernel verifier forbid
indexing BPF map from such array unless the index is a fixed value, but
if the index is fixed why not merging it into name?
For example:
Program like this:
...
unsigned long cpu = get_smp_processor_id();
int *pval = map_lookup_elem(&map_array[cpu], &key);
...
Generates bytecode like this:
0: (b7) r1 = 0
1: (63) *(u32 *)(r10 -4) = r1
2: (b7) r1 = 680997
3: (63) *(u32 *)(r10 -8) = r1
4: (85) call 8
5: (67) r0 <<= 4
6: (18) r1 = 0x112dd000
8: (0f) r0 += r1
9: (bf) r2 = r10
10: (07) r2 += -4
11: (bf) r1 = r0
12: (85) call 1
Where instruction 8 is the computation, 8 and 11 render r1 to an invalid
value for function map_lookup_elem, causes verifier report error.
Signed-off-by: Eric Leblond <eric@regit.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Wang Nan <wangnan0@huawei.com>
[ Merge bpf_object__init_maps_name into bpf_object__init_maps.
Fix segfault for buggy BPF script Validate obj->maps ]
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161115040617.69788-5-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New LLVM will issue newly assigned EM_BPF machine code. The new code
will be propagated to glibc and libelf.
This patch introduces the new machine code to libbpf.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468821668-60088-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now libbpf support tracepoint program type. Report meaningful error when kernel
version is less than 4.7.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468406646-21642-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 4 new APIs to adjust and query the type of a BPF program.
Load program according to type set by caller. Default is set to
BPF_PROG_TYPE_KPROBE.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468406646-21642-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow the build to complete on older systems, where those files are
either not uptodate, lacking some recent additions or not present at
all.
And check if the copy drifts from the kernel, as in this synthetic test:
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/linux/bpf.h differs from kernel
Warning: tools/include/linux/bpf_common.h differs from kernel
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5plvi2gq4x469dcyybiu226q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding a missing license descriptopn header to files in libbpf, make it
LGPL-2.1.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Leblond <eleblond@stamus-networks.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467630162-193121-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trivial fix to spelling mistake
Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1467116617-8318-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency with class__priv() elsewhere, and with the callback
typedef for clearing those areas (e.g. bpf_map_clear_priv_t).
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-rnbiyv27ohw8xppsgx0el3xb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency with bpf_map__priv() and elsewhere.
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-x17nk5mrazkf45z0l0ahlmo8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The use of this term is not warranted here, we use it in the kernel
sources and in tools/ for refcounting, so, for consistency, rename them.
Acked-bu: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-4ya1ot2e2fkrz48ws9ebiofs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency, leaving "get" for reference counting.
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-msy8sxfz9th6gl2xjeci2btm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And for consistency, rename it to bpf_map__def(), leaving "get" for
reference counting.
Also make it return a const pointer, as suggested by Wang.
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-mer00xqkiho0ymg66b5i9luw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency, leaving "get" for reference counting.
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-crnflv84ejyhpba933ec71gs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To try to, over time, consistently use the IS_ERR() interface instead of
using two return values, i.e. the integer return value for an error and
the pointer address to return the bpf_map->priv pointer.
Also rename it to bpf__priv(), to leave the "get" term for reference
counting.
Noticed while working on using BPF for collecting non-integer syscall
argument payloads (struct sockaddr in calls such as connect(), for
instance), where we need to use BPF maps and thus generalise
bpf__setup_stdout() to connect bpf_output events with maps in a bpf
proggie.
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-saypxyd6ptrct379jqgxx4bl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Libbpf should check the target section before doing relocation to ensure
the relocation is correct. If not, a bug in LLVM causes an error. See
[1]. Also, if an incorrect BPF script uses both global variable and
map, global variable whould be treated as map and be relocated without
error.
This patch saves the id of the map section into obj->efile and compare
target section of a relocation symbol against it during relocation.
Previous patch introduces a test case about this problem. After this
patch:
# ~/perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : Ok
37.3: Test BPF relocation checker : Ok
# perf test -v BPF
...
37.3: Test BPF relocation checker :
...
libbpf: loading object '[bpf_relocation_test]' from buffer
libbpf: section .strtab, size 126, link 0, flags 0, type=3
libbpf: section .text, size 0, link 0, flags 6, type=1
libbpf: section .data, size 0, link 0, flags 3, type=1
libbpf: section .bss, size 0, link 0, flags 3, type=8
libbpf: section func=sys_write, size 104, link 0, flags 6, type=1
libbpf: found program func=sys_write
libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9
libbpf: section maps, size 16, link 0, flags 3, type=1
libbpf: maps in [bpf_relocation_test]: 16 bytes
libbpf: section license, size 4, link 0, flags 3, type=1
libbpf: license of [bpf_relocation_test] is GPL
libbpf: section version, size 4, link 0, flags 3, type=1
libbpf: kernel version of [bpf_relocation_test] is 40400
libbpf: section .symtab, size 144, link 1, flags 0, type=2
libbpf: map 0 is "my_table"
libbpf: collecting relocating info for: 'func=sys_write'
libbpf: Program 'func=sys_write' contains non-map related relo data pointing to section 65522
bpf: failed to load buffer
Compile BPF program failed.
test child finished with 0
---- end ----
Test BPF filter subtest 2: Ok
[1] https://llvm.org/bugs/show_bug.cgi?id=26243
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf build is currently (v4.4-rc5) broken on powerpc:
bpf.c:28:4: error: #error __NR_bpf not defined. libbpf does not support
your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^
Fix this by including tools/scripts/Makefile.arch for the proper $ARCH
macro. While at it, remove redundant LP64 macro definition.
Also, since libbpf require $(srctree) now, detect the path of srctree
like perf.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-10-git-send-email-wangnan0@huawei.com
[Use tools/scripts/Makefile.arch]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Checks BPF syscall number, turn off libbpf building on platform doesn't
correctly support sys_bpf instead of blocking compiling.
Reported-and-Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add *.cmd files to be removed within clean target.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509693-13452-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using FEATURE-DUMP in bpf subproject for features detection in case bpf
is built via perf. Keeping the current features detection otherwise.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim pointed out a potential problem in original code that it
fetches names of maps from section header string table, which is used
to store section names.
Original code doesn't cause error because of a LLVM behavior that, it
combines shstrtab into strtab. For example:
$ echo 'int func() {return 0;}' | x86_64-oe-linux-clang -x c -o temp.o -c -
$ readelf -h ./temp.o
ELF Header:
Magic: 7f 45 4c 46 02 01 01 03 00 00 00 00 00 00 00 00
...
Section header string table index: 1
$ readelf -S ./temp.o
There are 10 section headers, starting at offset 0x288:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .strtab STRTAB 0000000000000000 00000230
0000000000000051 0000000000000000 0 0 1
...
$ readelf -p .strtab ./temp.o
String dump of section '.strtab':
[ 1] .text
[ 7] .comment
[ 10] .bss
[ 15] .note.GNU-stack
[ 25] .rela.eh_frame
[ 34] func
[ 39] .strtab
[ 41] .symtab
[ 49] .data
[ 4f] -
$ readelf -p .shstrtab ./temp.o
readelf: Warning: Section '.shstrtab' was not dumped because it does not exist!
Where, 'section header string table index' points to '.strtab', and
symbol names are also stored there.
However, in case of gcc:
$ echo 'int func() {return 0;}' | gcc -x c -o temp.o -c -
$ readelf -p .shstrtab ./temp.o
String dump of section '.shstrtab':
[ 1] .symtab
[ 9] .strtab
[ 11] .shstrtab
[ 1b] .text
[ 21] .data
[ 27] .bss
[ 2c] .comment
[ 35] .note.GNU-stack
[ 45] .rela.eh_frame
$ readelf -p .strtab ./temp.o
String dump of section '.strtab':
[ 1] func
They are separated sections.
Although original code doesn't cause error, we'd better use canonical
method for fetching symbol names to avoid potential behavior changing.
This patch learns from readelf's code, fetches string from sh_link
of .symbol section.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reported-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449541544-67621-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 561bbccac7 ("tools lib bpf:
Extract and collect map names from BPF object file") forgets checking
return value of strdup(). This patch fixes it. It also checks names
pointer before strcmp() for safety.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 561bbccac7 ("tools lib bpf: Extract and collect map names from BPF object file")
Link: http://lkml.kernel.org/r/1449541544-67621-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects name of maps in BPF object files and saves them into
'maps' field in 'struct bpf_object'. 'bpf_object__get_map_by_name' is
introduced to retrive fd and definitions of a map through its name.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448614067-197576-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects more information from maps sections in BPF object
files into 'struct bpf_object', enables later patches access those
information (such as the type and size of the map).
In this patch, a new handler 'struct bpf_map' is extracted in parallel
with bpf_object and bpf_program. Its iterator and accessor is also
created.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448614067-197576-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add bpf_map_update_elem() helper function which calls the sys_bpf
syscall to update elements in bpf maps. Upcoming patches will use it to
adjust data in map through the perf command line.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448372181-151723-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch libbpf always do feature check even when cleaning.
For example:
$ cd kernel/tools/lib/bpf
$ make
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CC libbpf.o
CC bpf.o
LD libbpf-in.o
LINK libbpf.a
LINK libbpf.so
$ make clean
CLEAN libbpf
CLEAN core-gen
$ make clean
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CLEAN libbpf
CLEAN core-gen
$
Although the first 'make clean' doesn't show feature check result, it
still does the check. No output because check result is similar to
FEATURE-DUMP.libbpf.
This patch uses same method as perf to turn off feature checking when
'make clean'.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448372181-151723-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is a preparation for BPF prologue support which allows
generating a series of BPF bytecode for fetching kernel data before
calling program code. With the newly introduced multiple instances
support, perf is able to create different prologues for different kprobe
points.
Before this patch, a bpf_program can be loaded into kernel only once,
and get the only resulting fd. What this patch does is to allow creating
and loading different variants of one bpf_program, then fetching their
fds.
Here we describe the basic idea in this patch. The detailed description
of the newly introduced APIs can be found in comments in the patch body.
The key of this patch is the new mechanism in bpf_program__load().
Instead of loading BPF program into kernel directly, it calls a
'pre-processor' to generate program instances which would be finally
loaded into the kernel based on the original code. To enable the
generation of multiple instances, libbpf passes an index to the
pre-processor so it know which instance is being loaded.
Pre-processor should be called from libbpf's user (perf) using
bpf_program__set_prep(). The number of instances and the relationship
between indices and the target instance should be clear when calling
bpf_program__set_prep().
To retrieve a fd for a specific instance of a program,
bpf_program__nth_fd() is introduced. It returns the resulting fd
according to index.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[ Enclosed multi-line if/else blocks with {}, (*func_ptr)() -> func_ptr() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_object__get_kversion() can be used to fetch value of object's
'version' section. Following patch will use it for error reporting.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In this patch, a series of libbpf specific error numbers and
libbpf_strerror() are introduced to help reporting errors.
Functions are updated to pass correct the error number through the
CHECK_ERR() macro.
All users of bpf_object__open{_buffer}() and bpf_program__title() in
perf are modified accordingly. In addition, due to the error codes
changing, bpf__strerror_load() is also modified to use them.
bpf__strerror_head() is also changed accordingly so it can parse libbpf
errors. bpf_loader_strerror() is introduced for that purpose, and will
be improved by the following patch.
load_program() is improved not to dump log buffer if it is empty. log
buffer is also used to deduce whether the error was caused by an invalid
program or other problem.
v1 -> v2:
- Using macro for error code.
- Fetch error message based on array index, eliminate for-loop.
- Use log buffer to detect the reason of failure. 3 new error code
are introduced to replace LIBBPF_ERRNO__LOAD.
In v1:
# perf record -e ./test_ill_program.o ls
event syntax error: './test_ill_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
# perf record -e ./test_kversion_nomatch_program.o ls
event syntax error: './test_kversion_nomatch_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
# perf record -e ./test_big_program.o ls
event syntax error: './test_big_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
In v2:
# perf record -e ./test_ill_program.o ls
event syntax error: './test_ill_program.o'
\___ Kernel verifier blocks program loading
SKIP
# perf record -e ./test_kversion_nomatch_program.o
event syntax error: './test_kversion_nomatch_program.o'
\___ Incorrect kernel version
SKIP
(Will be further improved by following patches)
# perf record -e ./test_big_program.o
event syntax error: './test_big_program.o'
\___ Program too big
SKIP
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit ed63f34c02 ("perf tools: Make perf
depend on libbpf") triggers the build of libbpf when building the perf
tools, dynamically creating FEATURE-DUMP.libbpf.
It failed to update the tools/lib/bpf/.gitignore file to have that
prefix, fix it.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 65f041bee7 ("tools lib bpf: Use FEATURE_USER to allow building in the same dir as perf")
Link: http://lkml.kernel.org/r/1446706594-4142-1-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CC libbpf.o
cc1: warnings being treated as errors
libbpf.c: In function 'bpf_program__title':
libbpf.c:1037: error: declaration of 'dup' shadows a global declaration
/usr/include/unistd.h:528: error: shadowed declaration is here
mv: cannot stat `./.libbpf.o.tmp': No such file or directory
make[3]: *** [libbpf.o] Error 1
make[2]: *** [libbpf-in.o] Error 2
make[1]: *** [/linux/tools/lib/bpf/libbpf.a] Error 2
make[1]: *** Waiting for unfinished jobs....
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1446549665-2342-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the fixdep target into the Makefile.include to ease up building of
fixdep helper, that needs to be built before we dive in to the build itself.
The user can invoke the fixdep target to build the helper.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To ease up build framework code setup for users.
More shared code will be added in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building tools/lib/bpf as part of the tools/perf/ build process,
which will happend when we introduce a patch wiring that up, we end up
stomping on the feature detection caching mechanism, that uses a file in
the output directory (O=) that is shared by libbpf and perf to check if
something changed from one build to another that requires redoing the
feature detection process.
By using the recently introduced FEATURE_USER tools/build/ knob, we can
avoid that:
Before, every make invokation would run the feature detection:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
<SNIP>
... get_cpuid: [ on ]
... bpf: [ on ]
GEN perf-archive
GEN perf-with-kcore
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
<SNIP>
After:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
make: Leaving directory '/home/git/linux/tools/perf'
$
Because we now have two different feature detection state files:
$ ls -la /tmp/build/perf/FEATURE-DUMP*
-rw-rw-r--. 1 acme acme 338 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP
-rw-rw-r--. 1 acme acme 33 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP.libbpf
$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-s6ev9wfqy7pvvs58emys2g90@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libbpf was introduced it wrongly asked for the "libelf" and "bpf"
feature tests to be performed (via FEATURE_TESTS), while asking that
"libbpf", "libelf-mmap", "libelf-getphdrnum" and "bpf" to have the
result of its respective tests to be displayed (via FEATURE_DISPLAY).
Due to another recently bug fixed in the tools/build/ infrastructure
("tools build: Fixup feature detection display function name") the
results for the entries in the FEATURE_DISPLAY, for this case, were
appearing as all succeeding, when two of them (the ones only on the
DISPLAY) were not even being performed.
Before:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ OFF ]
... libelf-mmap: [ OFF ]
... bpf: [ on ]
<SNIP>
After, with FEATURE_TESTS == FEATURE_DISPLAY:
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... bpf: [ on ]
<SNIP>
I just inverted, so that it tests the four features but displays just
the libelf and mmap ones, to make it more compact. So it becomes:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-y4bd59e6j9rzzojiyeqrg2jq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch there's no way to connect a loaded bpf object
to its source file. However, during applying perf's '--filter' to BPF
object, without this connection makes things harder, because perf loads
all programs together, but '--filter' setting is for each object.
The API of bpf_object__open_buffer() is changed to allow passing a name.
Fortunately, at this time there's only one user of it (perf test LLVM),
so we change it together.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440742821-44548-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow enumeration of all bpf_objects, keep them in a list (hidden to
caller). bpf_object__for_each_safe() is introduced to do this iteration.
It is safe even user close the object during iteration.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-23-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces accessors for user of libbpf to retrieve section
name and fd of a opened/loaded eBPF program. 'struct bpf_prog_handler'
is used for that purpose. Accessors of programs section name and file
descriptor are provided. Set/get private data are also impelmented.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1435716878-189507-21-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch utilizes previous introduced bpf_load_program to load
programs in the ELF file into kernel. Result is stored in 'fd' field in
'struct bpf_program'.
During loading, it allocs a log buffer and free it before return. Note
that that buffer is not passed to bpf_load_program() if the first
loading try is successful. Doesn't use a statically allocated log buffer
to avoid potention multi-thread problem.
Instructions collected during opening is cleared after loading.
load_program() is created for loading a 'struct bpf_insn' array into
kernel, bpf_program__load() calls it. By this design we have a function
loads instructions into kernel. It will be used by further patches,
which creates different instances from a program and load them into
kernel.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-20-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_load_program() can be used to load bpf program into kernel. To make
loading faster, first try to load without logbuf. Try again with logbuf
if the first try failed.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-19-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If an eBPF program accesses a map, LLVM generates a load instruction
which loads an absolute address into a register, like this:
ld_64 r1, <MCOperand Expr:(mymap)>
...
call 2
That ld_64 instruction will be recorded in relocation section.
To enable the usage of that map, relocation must be done by replacing
the immediate value by real map file descriptor so it can be found by
eBPF map functions.
This patch to the relocation work based on information collected by
patches:
'bpf tools: Collect symbol table from SHT_SYMTAB section',
'bpf tools: Collect relocation sections from SHT_REL sections'
and
'bpf tools: Record map accessing instructions for each program'.
For each instruction which needs relocation, it inject corresponding
file descriptor to imm field. As a part of protocol, src_reg is set to
BPF_PSEUDO_MAP_FD to notify kernel this is a map loading instruction.
This is the final part of map relocation patch. The principle of map
relocation is described in commit message of 'bpf tools: Collect symbol
table from SHT_SYMTAB section'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-18-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch creates maps based on 'map' section in object file using
bpf_create_map(), and stores the fds into an array in 'struct
bpf_object'.
Previous patches parse ELF object file and collects required data, but
doesn't play with the kernel. They belong to the 'opening' phase. This
patch is the first patch in 'loading' phase. The 'loaded' field is
introduced in 'struct bpf_object' to avoid loading an object twice,
because the loading phase clears resources collected during the opening
which becomes useless after loading. In this patch, maps_buf is cleared.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-17-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces bpf.c and bpf.h, which hold common functions
issuing bpf syscall. The goal of these two files is to hide syscall
completely from user. Note that bpf.c and bpf.h deal with kernel
interface only. Things like structure of 'map' section in the ELF object
is not cared by of bpf.[ch].
We first introduce bpf_create_map().
Note that, since functions in bpf.[ch] are wrapper of sys_bpf, they
don't use OO style naming.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch records the indices of instructions which are needed to be
relocated. That information is saved in the 'reloc_desc' field in
'struct bpf_program'. In the loading phase (this patch takes effect in
the opening phase), the collected instructions will be replaced by map
loading instructions.
Since we are going to close the ELF file and clear all data at the end
of the 'opening' phase, the ELF information will no longer be valid in
the 'loading' phase. We have to locate the instructions before maps are
loaded, instead of directly modifying the instruction.
'struct bpf_map_def' is introduced in this patch to let us know how many
maps are defined in the object.
This is the third part of map relocation. The principle of map relocation
is described in commit message of 'bpf tools: Collect symbol table from
SHT_SYMTAB section'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-15-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects relocation sections into 'struct object'. Such
sections are used for connecting maps to bpf programs. 'reloc' field in
'struct bpf_object' is introduced for storing such information.
This patch simply store the data into 'reloc' field. Following patch
will parse them to know the exact instructions which are needed to be
relocated.
Note that the collected data will be invalid after ELF object file is
closed.
This is the second patch related to map relocation. The first one is
'bpf tools: Collect symbol table from SHT_SYMTAB section'. The
principle of map relocation is described in its commit message.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects all programs in an object file into an array of
'struct bpf_program' for further processing. That structure is for
representing each eBPF program. 'bpf_prog' should be a better name, but
it has been used by linux/filter.h. Although it is a kernel space name,
I still prefer to call it 'bpf_program' to prevent possible confusion.
bpf_object__add_program() creates a new 'struct bpf_program' object.
It first init a variable in stack using bpf_program__init(), then if
success, enlarges obj->programs array and copy the new object in.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-13-git-send-email-wangnan0@huawei.com
[ Made bpf_object__add_program() propagate the error (-EINVAL or -ENOMEM) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects symbols section. This section is useful when linking
BPF maps.
What 'bpf_map_xxx()' functions actually require are map's file
descriptors (and the internal verifier converts fds into pointers to
'struct bpf_map'), which we don't know when compiling. Therefore, we
should make compiler generate a 'ldr_64 r1, <imm>' instruction, and
fill the 'imm' field with the actual file descriptor when loading in
libbpf.
BPF programs should be written in this way:
struct bpf_map_def SEC("maps") my_map = {
.type = BPF_MAP_TYPE_HASH,
.key_size = sizeof(unsigned long),
.value_size = sizeof(unsigned long),
.max_entries = 1000000,
};
SEC("my_func=sys_write")
int my_func(void *ctx)
{
...
bpf_map_update_elem(&my_map, &key, &value, BPF_ANY);
...
}
Compiler should convert '&my_map' into a 'ldr_64, r1, <imm>'
instruction, where imm should be the address of 'my_map'. According to
the address, libbpf knows which map it actually referenced, and then
fills the imm field with the 'fd' of that map created by it.
However, since we never really 'link' the object file, the imm field is
only a record in relocation section. Therefore libbpf should do the
relocation:
1. In relocation section (type == SHT_REL), positions of each such
'ldr_64' instruction are recorded with a reference of an entry in
symbol table (SHT_SYMTAB);
2. From records in symbol table we can find the indics of map
variables.
Libbpf first record SHT_SYMTAB and positions of each instruction which
required bu such operation. Then create file descriptor. Finally, after
map creation complete, replace the imm field.
This is the first patch of BPF map related stuff. It records SHT_SYMTAB
into object's efile field for further use.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-12-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If maps are used by eBPF programs, corresponding object file(s) should
contain a section named 'map'. Which contains map definitions. This
patch copies the data of the whole section. Map data parsing should be
acted just before map loading.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Expand bpf_obj_elf_collect() to collect license and kernel version
information in eBPF object file. eBPF object file should have a section
named 'license', which contains a string. It should also have a section
named 'version', contains a u32 LINUX_VERSION_CODE.
bpf_obj_validate() is introduced to validate object file after loaded.
Currently it only check existence of 'version' section.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_obj_elf_collect() is introduced to iterate over each elf sections to
collection information in eBPF object files. This function will futher
enhanced to collect license, kernel version, programs, configs and map
information.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check endianness according to EHDR. Code is taken from
tools/perf/util/symbol-elf.c.
Libbpf doesn't magically convert missmatched endianness. Even if we swap
eBPF instructions to correct byte order, we are unable to deal with
endianness in code logical generated by LLVM.
Therefore, libbpf should simply reject missmatched ELF object, and let
LLVM to create good code.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support dynamic compiling, this patch allows caller to pass a
in-memory buffer to libbpf by bpf_object__open_buffer(). libbpf calls
elf_memory() to open it as ELF object file.
Because __bpf_object__open() collects all required data and won't need
that buffer anymore, libbpf uses that buffer directly instead of clone a
new buffer. Caller of libbpf can free that buffer or use it do other
things after bpf_object__open_buffer() return.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch defines basic interface of libbpf. 'struct bpf_object' will
be the handler of each object file. Its internal structure is hide to
user. eBPF object files are compiled by LLVM as ELF format. In this
patch, libelf is used to open those files, read EHDR and do basic
validation according to e_type and e_machine.
All elf related staffs are grouped together and reside in efile field of
'struct bpf_object'. bpf_object__elf_finish() is introduced to clear it.
After all eBPF programs in an object file are loaded, related ELF
information is useless. Close the object file and free those memory.
The zfree() and zclose() functions are introduced to ensure setting NULL
pointers and negative file descriptors after resources are released.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By libbpf_set_print(), users of libbpf are allowed to register he/she
own debug, info and warning printing functions. Libbpf will use those
functions to print messages. If not provided, default info and warning
printing functions are fprintf(stderr, ...); default debug printing
is NULL.
This API is designed to be used by perf, enables it to register its own
logging functions to make all logs uniform, instead of separated
logging level control.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the first patch of libbpf. The goal of libbpf is to create a
standard way for accessing eBPF object files. This patch creates
'Makefile' and 'Build' for it, allows 'make' to build libbpf.a and
libbpf.so, 'make install' to put them into proper directories.
Most part of Makefile is borrowed from traceevent.
Before building, it checks the existence of libelf in Makefile, and deny
to build if not found. Instead of throwing an error if libelf not found,
the error raises in a phony target "elfdep". This design is to ensure
'make clean' still workable even if libelf is not found.
Because libbpf requires 'kern_version' field set for 'union bpf_attr'
(bpfdep" is used for that dependency), Kernel BPF API is also checked
by intruducing a new feature check 'bpf' into tools/build/feature,
which checks the existence and version of linux/bpf.h. When building
libbpf, it searches that file from include/uapi/linux in kernel source
tree (controlled by FEATURE_CHECK_CFLAGS-bpf). Since it searches kernel
source tree it reside, installing of newest kernel headers is not
required, except we are trying to port these files to an old kernel.
To avoid checking that file when perf building, the newly introduced
'bpf' feature check doesn't added into FEATURE_TESTS and
FEATURE_DISPLAY by default in tools/build/Makefile.feature, but added
into libbpf's specific.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Bcc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
