Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/qxl/qxl_display.c: In function 'qxl_primary_atomic_update':
drivers/gpu/drm/qxl/qxl_display.c:538:17: warning:
variable 'bo_old' set but not used [-Wunused-but-set-variable]
It's not used any more after 4979904c62 ("drm/qxl: use shadow bo directly")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190218085459.196470-1-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a helper functions to check video modes. Also add a helper to check
framebuffer buffer objects, using the former for consistency. That way
we should not fail in qxl_primary_atomic_check() because video modes
which are too big will not be added to the mode list in the first place.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-21-kraxel@redhat.com
qdev->monitors_config->max_allowed is effectively set by the
qxl.num_heads module parameter, stored in the qxl_num_crtc variable.
Lets get rid of the indirection and use the variable qxl_num_crtc
directly. The kernel doesn't need to dereference pointers each time it
needs the value, and when reading the code you don't have to trace where
and why qdev->monitors_config->max_allowed is set.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-16-kraxel@redhat.com
The qxl device supports only a single active framebuffer ("primary
surface" in spice terminology). In multihead configurations are handled
by defining rectangles within the primary surface for each head/crtc.
Userspace which uses the qxl ioctl interface (xorg qxl driver) is aware
of this limitation and will setup framebuffers and crtcs accordingly.
Userspace which uses dumb framebuffers (xorg modesetting driver,
wayland) is not aware of this limitation and tries to use two
framebuffers (one for each crtc) instead.
The qxl kms driver already has the dumb bo separated from the primary
surface, by using a (shared) shadow bo as primary surface. This is
needed to support pageflips without having to re-create the primary
surface. The qxl driver will blit from the dumb bo to the shadow bo
instead.
So we can extend the shadow logic: Maintain a global shadow bo (aka
primary surface), make it big enough that dumb bo's for all crtcs fit in
side-by-side. Adjust the pageflip blits to place the heads next to each
other in the shadow.
With this patch in place multihead qxl works with wayland.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-15-kraxel@redhat.com
Pass the shadow bo to qxl_io_create_primary() instead of expecting
qxl_io_create_primary to check bo->shadow. Set is_primary flag on the
shadow bo. Move the is_primary tracking into qxl_io_create_primary()
and qxl_io_destroy_primary() functions.
That simplifies primary surface tracking and the workflow in
qxl_primary_atomic_update().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-14-kraxel@redhat.com
qxl_io_create/destroy_primary: primary_bo tracking [fixup]
Track which bo is used as primary surface. With that in place we don't
need the primary_created flag any more, we can just check the primary bo
pointer instead.
Also verify we don't already have a primary surface in
qxl_io_create_primary().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-13-kraxel@redhat.com
The qxl device ties the cursor to the primary surface. Therefore
calling qxl_io_destroy_primary() and qxl_io_create_primary() to switch
the framebuffer causes the cursor information being lost and the driver
must re-apply it.
The correct call order to do that is qxl_io_destroy_primary() +
qxl_io_create_primary() + qxl_primary_apply_cursor().
The old code did qxl_io_destroy_primary() + qxl_primary_apply_cursor() +
qxl_io_create_primary(). Due to qxl_primary_apply_cursor request being
queued in a ringbuffer and qxl_io_create_primary() trapping to the
hypervisor instantly there is a high chance that qxl_io_create_primary()
is processed first even with the wrong call order. But it's racy and
thus not reliable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-11-kraxel@redhat.com
The shadow bo is used as qxl surface, so allocate it as
QXL_GEM_DOMAIN_SURFACE. Should usually be allocated in
PRIV ttm domain then, so this reduces VRAM memory pressure.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-9-kraxel@redhat.com
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190108162152.GA25361@embeddedor
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU keeps a vram reference to the last QXLCursorCmd it received.
This QXLCursorCmd command points to a QXLCursor instance (stored in vram
too). However, while the QXLCursorCmd memory is pinned, the QXLCursor
memory is not.
When booting a recent Fedora to its login screen while monitoring the
QXLCursorCmd QEMU holds, it's possible to see the QXLCursor memory
becoming invalid shortly after boot. Pinning that memory ensures that
that QXLCursor memory is not going to be moved by the guest kernel.
Moving the pin/unpin to qxl_release_list_add()/qxl_release_free_list()
would be a more generic fix. However, doing this quickly exhausts QXL
video memory, so more fixing would be needed before this is workable.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181120162004.22807-3-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Lots of code can be removed by relying on fb-helper:
- "struct drm_framebuffer" moves to fb_helper.fb.
- "struct drm_gem_object" moves to fb_helper.obj[0].
- "struct qxl_device" can be inferred as drm_fb_helper is embedded.
- qxl_user_framebuffer_create -> drm_gem_fb_create.
- qxl_user_framebuffer_destroy -> drm_gem_fb_destroy.
- qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow).
Remove unused code:
- qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend.
- Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size.
Misc notes:
- The dirty callback is preserved as it is necessary to trigger update
commands in the hw (the screen stays black otherwise).
- No idea when .create_handle in drm_framebuffer_funcs is used, but use
the same drm_gem_fb_create_handle to match drm_gem_fb_funcs.
- I don't know why qxl_fb_find_or_create_single used to check for an
existing framebuffer and removed that check to match other drivers.
- Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to
be dynamically allocated. Replace the existing defio config by
drm_fb_helper_defio_init to accomodate this.
Testing results: startx with fbdev, modesetting and qxl all seems to
work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously
fails but others are fine. QEMU -spice and QEMU -spice with vdagent and
multiple (resized) displays (via remote-viewer) also works.
unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a
use-after-free in qxl_check_idle via qxl_ttm_fini).
Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that
would result in further code reduction, improve error handling (like not
leaking shadow memory), but unfortunately QXL has no implementation for
qxl_gem_prime_vmap.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If qxl_alloc_client_monitors_config() fails to allocate
client_monitors_config then NULL pointer dereference occurs
in function qxl_display_copy_rom_client_monitors_config() after
qxl_alloc_client_monitors_config() call.
The patch adds return error from qxl_alloc_client_monitors_config()
and additional status for qxl_display_copy_rom_client_monitors_config
return value.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Link: http://patchwork.freedesktop.org/patch/msgid/20180727153058.23620-1-vasilyev@ispras.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kCVp
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-06-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Only a small qxl fix that was queued for v4.17.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/08dcbd63-ed18-6232-7bbd-547a3d63b90f@linux.intel.com
"qxl_bo_unref" may sleep, but calling "qxl_release_map" causes
"preempt_disable()" to be called and "preempt_enable()" isn't called
until "qxl_release_unmap" is used. Move the call to "qxl_bo_unref" out
from in between the two to avoid sleeping from an atomic context.
This issue can be demonstrated on a kernel with CONFIG_LOCKDEP=y by
creating a VM using QXL, using a desktop environment using Xorg, then
moving the cursor on or off a window.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1571128
Fixes: 9428088c90 ("drm/qxl: reapply cursor after resetting primary")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180601200532.13619-1-jcline@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These days drm core checks function pointers everywhere before calling
them. So we can drop a bunch of dummy functions now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-5-kraxel@redhat.com
The encoder callbacks are only called in case the video mode changes.
So any layout changes without mode changes will go unnoticed.
Add qxl_crtc_update_monitors_config(), based on the old
qxl_write_monitors_config_for_encoder() function. Hook it into the
enable, disable and flush atomic crtc callbacks. Remove monitors_config
updates from all other places.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1544322
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-4-kraxel@redhat.com
qxl_io_log() sends messages over to the host (qemu) for logging.
Remove the function and all callers, we can just use standard
DRM_DEBUG calls (and if needed a serial console).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-2-kraxel@redhat.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131515.2360-1-luc.vanoostenryck@gmail.com
Replace drm_gem_object_reference/unreference function with *_get/put()
suffixes, because it is shorter and consistent with the kernel
kref_get/put() functions. The following Coccinelle script was used:
@@
expression e;
@@
(
-drm_gem_object_reference(e);
+drm_gem_object_get(e);
|
-drm_gem_object_unreference(e);
+drm_gem_object_put(e);
|
-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);
)
Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1521570567-22519-1-git-send-email-santhameena13@gmail.com
QXL associates mouse state with its primary plane.
Destroying a primary plane and putting a new one in place has the side
effect of destroying the cursor as well.
This commit changes the driver to reapply the cursor any time a new
primary is created. It achieves this by keeping a reference to the
cursor bo on the qxl_crtc struct.
This fix is very similar to
commit 4532b241a4 ("drm/qxl: reapply cursor after SetCrtc calls")
which got implicitly reverted as part of implementing the atomic
modeset feature.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097
Fixes: 1277eed5fe ("drm: qxl: Atomic phase 1: convert cursor to universal plane")
Cc: stable@vger.kernel.org
Signed-off-by: Ray Strode <rstrode@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
qxl_cursor_atomic_update allocs a bo for the cursor that
it never frees up at the end of the function.
This commit fixes that.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch changes the way the primary surface is used for dumb
framebuffers. Instead of configuring the bo itself as primary surface
a shadow bo is created and used instead. Framebuffers can share the
shadow bo in case they have the same format and resolution.
On atomic plane updates we don't have to update the primary surface in
case we pageflip from one framebuffer to another framebuffer which
shares the same shadow. This in turn avoids the flicker caused by the
primary-destroy + primary-create cycle, which is very annonying when
running wayland on qxl.
The qxl driver never actually writes to the shadow bo. It sends qxl
blit commands which update it though, and the spice server might
actually execute them (and thereby write to the shadow) in case the
local rendering is kicked for some reason. This happens for example in
case qemu is asked to write out a dump of the guest display (screendump
monitor command).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171019062150.28090-3-kraxel@redhat.com
The atomic conversion of the qxl driver didn't got the primary surface
handling completely right. It works in the common simple cases, but
fails for example when changing the display resolution using xrandr or
in multihead setups.
The rules are simple: There is one primary surface. Before defining a
new one you have to destroy the old one.
This patch makes qxl_primary_atomic_update() destroy the primary surface
before defining a new one. It fixes is_primary flag updates. It adds
is_primary checks so we don't try to update the primary surface in case
it already has the state we want it being in.
Fixes: 3538e80a86 ("drm: qxl: Atomic phase 1: Implement mode_set_nofb")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102338
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196777
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170911093950.22401-1-kraxel@redhat.com
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com
The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.
While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
The CRTC .dpms() helper operation is called by the atomic helpers only
when no .prepare(), .atomic_disable() or .disable() operation is
provided. As the qxl driver provides a .disable() operation, the .dpms()
operation is unused and can be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-3-laurent.pinchart+renesas@ideasonboard.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2lrAAoJEHm+PkMAQRiGm3AH/13F1DlIk05aSXHoDr/idIpR
GMHmk3YF+EuFjsL463Sh6s/SSWmz0Lda8euaoB4wCWvQFX2ZjTE+aOd79XlRiZJQ
OTtLkV9I41eXIJUpEOHia7xZiCsbw+usqcHrm1aBoSh5KKV2iQmEOrnJdibqJVOF
eXUMphNK/zFtAd2bKtQSxkaBnOOqsQUgVQSkr2K9rSg25l0KokFC6c5K5IjLn4x9
QgDY4wmMvHrDz0CtpoqlNM4XqbsDJVrFeZGfg6hlMqSRDeXeg4h3Ol0VfIT496RP
QBdrDb6hWO+HKt9B0M+7Q+8a/Fsw+5dtpqv1W/Wlr0i4CS6euU8NChAmrpkrqGo=
=m5ba
-----END PGP SIGNATURE-----
Backmerge tag 'v4.12-rc3' into drm-next
Linux 4.12-rc3
Daniel has requested this for some drm-intel-next work.