On error, suggest installing static libraries
along with shared libraries.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091122131311.GA24318@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make standard error show up on console when V=2 is set.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091122112726.GC13644@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The write_event() function in builtin-record.c writes out all
mmap()'d DSOs including non-ELF files like GNOME resource files
and such.
Therefore, check for ELF_K_ELF in filename__read_build_id()
before attempting to read the ELF header with gelf_getehdr().
Fixes the following error messages when running "perf kmem
record":
penberg@penberg-laptop:~/src/linux/tools/perf$ perf kmem record
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.753 MB perf.data (~32885 samples) ]
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1258885784-11709-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds support for "--sort hit" and "--sort frag" to
the "perf kmem" tool. The former was already mentioned in the
help text and the latter is useful for finding call-sites that
exhibit worst case behavior for SLAB allocators.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <1258883880-7149-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
mem-memcpy.c uses perf event system calls to obtain CPU clocks.
And it suddenly dies with BUG_ON() when it running on Linux
doesn't support perf event.
Also fail at calloc() can occur easily when too large
length is passed. Fail of calloc() causes sudden death
with assert().
These behaviours are not friendly. So I fixed the treating of
errors.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258688237-3797-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v2: improved a few small details ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It better propagate errors, also if we do a simple:
[root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ;
perf trace [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ]
Fatal: not an trace data file
[root@doppio linux-2.6-tip]#
That is what is expected, right? I.e. as we didn't specify any
tracepoint event via -e, it should gracefully bail out and not
SEGFAULT.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-3-git-send-email-acme@infradead.org>
[ Fixed the error messages some more ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We better call this routine after both the kernel and modules
are loaded, because as it was if there weren't modules it would not
be called, resulting in kernel_map->end remaining at zero, so no
map would be found and consequently the kernel symtab wouldn't
get loaded, i.e. no kernel symbols would be resolved.
Also this fixes another case, that is when we _have_ modules,
but the last map would have its ->end address not set before we
loaded its symbols, which would never happen because ->end was
not set.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that the user have a clearer indication about the source of
the symbols, as we only state buildid mismatches in verbose
mode, because 'perf top' would overwrite such warning anyway.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
E.g.:
[root@doppio linux-2.6-tip]# perf top -v --vmlinux
../build/tip/vmlinux > /dev/null build_id in vmlinux is
e96699725a47413a50c231864a8e7a8ced40a31b while expected is
18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a, ignoring it
I.e. perf top was told to use a vmlinux file that is not the one
currently running on the machine, it ignores it and falls back
to using /proc/kallsyms.
This solves many, at first, mysterious results when people have
a stale vmlinux file while keeping the default of trying to use
the vmlinux file in the current directory in things like 'perf
annotate' where the DWARF info is required and thus we can't use
just /proc/kallsyms.
Modules buildids are already being checked as of the previous
changeset in this series, because we are using the default
dso__load routine, that will look at a series of places looking
for the best file with a matching buildid, starting in the
-debuginfo directories.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Just like we do with the other DSOs. This also simplifies the
kernel_maps setup process, now all that the tools need to do is
to call kernel_maps__init and the maps for the modules and
kernel will be created, then, later, when
kernel_maps__find_symbol() is used, it will also call
maps__find_symbol that already checks if the symtab was loaded,
loading it if needed.
Now if one does 'perf top --hide_kernel_symbols' we won't pay
the price of loading the (many) symbols in /proc/kallsyms or
vmlinux.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Will be used in more places.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the kernel we have more than one notes section, so the linker
script combines all and puts them into a ".notes" combined
section. So we need to look at both sections and also traverse
them looking at multiple GElf_Nhdr entries till we find the one
we want, with the build_id.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It should just load kernel symbols, not load the list of
modules. There are more stuff to move to other routines, but
lets do it in several steps.
End goal is to be able to defer symbol table loading till we
find a hit for that map address range. So that the kernel &
modules are handled just like all the other DSOs in the system.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the error, that, interestingly, are already handled by
all callers :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This time in perf_header__adds_write, propagating the do_write
error returns.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And also don't call the constructor in it, this way it adheres
to the model the other methods follow.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[root@doppio linux-2.6-tip]# perf record -a -f sleep 3s ; perf
buildid-list | grep vmlinux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.171 MB perf.data (~7489
samples) ] 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a vmlinux
[root@doppio linux-2.6-tip]#
Several refactorings were needed so that we can have symmetry
between dsos__load_modules() and dsos__load_kernel(), i.e. those
functions will respectively create and add to the dsos list the
loaded modules and kernel, with its buildids, but not load its
symbols. That is something the subcomands that need will have to
call dso__load_kernel_sym(), just like we do with modules with
dsos__load_module_sym()/dso__load_module_sym().
Next csets will actually use this info to stop producing bogus
results using mismatched vmlinux and .ko files.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
No need for this struct and its allocations, we can just use the
->build_id member we already have in struct dso, then ask for it
to be read, and later traverse the dsos list, writing the
buildid table to the perf.data file.
As a bonus, one more die() function got killed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we read the build_id from the DSO name to then index into
/usr/lib/debug/.buildid/DSO_BUILD_ID[0:2]/DSO_BUILD_ID[2:], we
were jumping directly to the comparision with the buildid we
already have in dso->build_id (that came from the perf.data
build_id section, collected at perf record time)
unconditionally, even if we didn't had recorded it, and
furthermore, comparing a formatted buildid with a rawbuildid, yikes.
Fix it by deleting the dso__read_build_id() function, that was
really misdesigned anyway, and do the necessary checks and
correct comparison of raw buildids.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
'perf bench mem memcpy' is a benchmark suite for measuring memcpy()
performance.
Example on a Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz:
| % perf bench mem memcpy -l 1GB
| # Running mem/memcpy benchmark...
| # Copying 1MB Bytes from 0xb7d98008 to 0xb7e99008 ...
|
| 726.216412 MB/Sec
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258471212-30281-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v2: updated changelog, clarified history of builtin-bench.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Defer to parse_source() time allocating it.
Now we use about this much memory:
1724 root 20 0 42104 10m 940 S 0.0 0.4 0:00.23 perf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258490282-1821-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We pre-calculate the symbol name length, then after we sort the
entries to print, calculate the biggest one and use that for the
symbol name width justification, then use the
dso->long_name->len to justificate the DSO name, deciding whether
using the short or long name depending on how much space we have
on the terminal.
IOW give as much info to the user as the terminal width allows.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258479655-28662-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using a two bytes hole we already had and since we also need to
calculate this strlen for fetching the buildids. We'll use it in
'perf top' to auto-adjust the output based on the terminal
width.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258479655-28662-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Compiler on ia64 rejects the "-m64" option.
Add arch specific pieces to perf.h
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4b02d7f43514327a@agluck-desktop.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This makes it possible to build perf statically, by
performing:
make LDFLAGS=-static
Since static libraries are only searched in the order they are
specified, move library list from LDFLAGS to EXTLIBS, so that
they are put at the end of linker command line.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091029152002.GA5406@redhat.com>
[ v2: resolved conflicts ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Porcelain can ignore it, humans can make more sense of it.
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258415125-15019-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Default continues to be showing all symbols. 'K' and 'U' can be
used to toggle showing kernel and user symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258415125-15019-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By querying the current number of rows, if the user specifies
the number of entries, use that instead. If the user uses the
'e' command to change the number of lines 0 will mean do it
automatically, any other number disables the auto resizing.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258407027-384-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We really should propagate such kinds of errors so that users of
these library functions decide what to do in such cases instead
of exiting in random places like now.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258407027-384-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With this we can list the buildids in a perf.data file so that
we can pipe them to other, distro specific tools that from the
buildids can figure out separate packages (foo-debuginfo) where
we can find the matching symtabs so that perf report can do its
job.
E.g:
[acme@doppio linux-2.6-tip]$ perf buildid-list | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869
520c2387a587cc5acfcf881e27dba1caaeab4b1f
ec8dd400904ddfcac8b1c343263a790f977159dc
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f
379bb828fd08859dbea73279f04abefabc95a6a3
[acme@doppio linux-2.6-tip]$ perf buildid-list -v | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869 /sbin/init
520c2387a587cc5acfcf881e27dba1caaeab4b1f /lib64/ld-2.10.1.so
ec8dd400904ddfcac8b1c343263a790f977159dc /lib64/libc-2.10.1.so
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f /sbin/udevd
379bb828fd08859dbea73279f04abefabc95a6a3 /lib64/libdl-2.10.1.so
[acme@doppio linux-2.6-tip]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To print the buildids in the list of dsos. Will be used by 'perf
buildid-list'
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Renaming it to perf_header__process_sections() and passing a
callback to handle each feature.
The next changesets will introduce 'perf buildid-list' that will
handle just the HEADER_BUILD_ID table, ignoring all the other
features.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to pass the symbol to the filter so that, for instance,
'perf top' can do filtering and also set the private area it
manages, setting the ->map pointer, etc.
I found this while running 'perf top' on a machine where hits
happened on PLT symbols, where ->map wasn't being set up and
segfaults thus happened.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258386491-20278-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ratio between the number of events and the time elapsed makes
sense only if task-clock event is counted. Otherwise it will be
simply a (confusing)
# 0.000 M/sec
This patch outputs the ratio only if task-clock event is counted.
Some test examples of before and after:
Before:
[lucas@skywalker linux.trees.git]$ sudo perf stat -e branch-misses -a -- sleep 1
Performance counter stats for 'sleep 1':
1367818 branch-misses # 0.000 M/sec
1.001494325 seconds time elapsed
After (without task-clock):
[lucas@skywalker perf]$ sudo ./perf stat -e branch-misses -a -- sleep 1
Performance counter stats for 'sleep 1':
1135044 branch-misses
1.001370775 seconds time elapsed
After (with task-clock):
[lucas@skywalker perf]$ sudo ./perf stat -e branch-misses -e task-clock -a -- sleep 1
Performance counter stats for 'sleep 1':
1070111 branch-misses # 0.534 M/sec
2002.730893 task-clock-msecs # 1.999 CPUs
1.001640292 seconds time elapsed
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091115140507.GB21561@skywalker.lan>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies util/string.[ch] to add new function:
perf_atoll() to parse string representing size in bytes.
This function parses (\d+)(b|B|kb|KB|mb|MB|gb|GB) (e.g. "256MB")
and returns its numeric value. (e.g. 268435456)
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258285013-4759-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some architectures (e.g. Alpha) do not support the
-fstack-protector-all compiler option and the use of the option
with -Werror causes the compiler to abort and the build fails.
Test that the compiler supports -fstack-protector-all before
inclusion in CFLAGS.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091111074302.GA3728@omega>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Build a set of section headers for features right after the
datas. Each implemented feature will have one of such section
header that provides the offset and the size of the data
manipulated by the feature.
The trace informations have moved after the data and are
recorded on exit time.
The new layout is as follows:
-----------------------
___
[ magic ] |
[ header size ] |
[ attr size ] |
[ attr content offset ] |
[ attr content size ] |
[ data offset ] File Headers
[ data size ] |
[ event_types offset ] |
[ event_types size ] |
[ feature bitmap ] v
[ attr section ]
[ events section ]
___
[ X ] |
[ X ] |
[ X ] Datas
[ X ] |
[ X ] v
___
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 2 offset ] |
[ Feature 2 size ] v
[ Feature 1 content ]
[ Feature 2 content ]
-----------------------
We have as many feature's section headers as we have features in
use for the current file.
Say Feat 1 and Feat 3 are used by the file, but not Feat 2. Then
the feature headers will be like follows:
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 3 offset ] |
[ Feature 3 size ] v
There is no hole to cover Feature 2 that is not in use here. We
only need to cover the needed headers in order, from the lowest
feature bit to the highest.
Currently we have two features: HEADER_TRACE_INFO and
HEADER_BUILD_ID. Both have their contents that follow the
feature headers. Putting the contents right after the feature
headers is not mandatory though. While we keep the feature
headers right after the data and in order, their offsets can
point everywhere. We have just put the two above feature
contents in the end of the file for convenience.
The purpose of this layout change is to have a file format that
scales while keeping it simple: having such linear feature
headers is less error prone wrt forward/backward compatibility
as the content of a feature can be put anywhere, its location
can even change by the time, it's fine because its headers will
tell where it is. And we know how to find these headers,
following the above rules.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-6-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And drop the alternate checks/sets using set_bit or other kind
of helpers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Keep the build-ids reading implementation in the data mapping
but move its call to the headers so that we have a better
control on it (offset seeking, size passing, etc..).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are saving the build id once we stop the profiling. And only
after doing that we know if we need to set that feature in the
header through the feature bitmap.
But if we want a proper feature support in the headers, using a
rule of offset/size pairs in sections, we need to know in
advance how many features we need to set in the headers, so that
we can reserve rooms for their section headers.
The current state doesn't allow that, as it forces us to first
save the build-ids to the file right after the datas instead of
planning any structured layout.
That's why this splits up the build-ids processing in two parts:
one that fetches the build-ids from the Dso objects, and one
that saves them into the file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that it makes easier to control it. Especially because we
plan to give it a feature section.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Don't forget to also synthetize the targeted process from perf
record or we'll miss its dso in the events and then we won't be
able to deal with its build-id.
We are missing it because it is created after the existing
synthetized tasks but before the counters are enabled and can
send its mapping event.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch improves sched-message.c with more comfortable output.
Change points are comment style description and
formatting numerical values and its units.
Example:
| % perf bench sched messaging
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 1.490 [sec]
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257865442-20252-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
This patch makes output of perf bench more friendly.
Current style of putput, keeping user wait
and printing everything suddenly when we finish,
may confuse users.
So I improved it:
| % perf bench sched messaging
| # Running sched/messaging benchmark... <- printed right after invocation
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 1.476 [sec]
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257865442-20252-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies command-list.txt for the entry of
perf-bench. So perf will show 'bench' in command list.
Example:
% perf
usage: perf [--version] [--help] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
bench General framework for benchmark suites
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
list List all symbolic event types
probe Define new dynamic tracepoints
record Run a command and record its profile into perf.data
report Read perf.data (created by perf record) and display the profile
sched Tool to trace/measure scheduler properties (latencies)
stat Run a command and gather performance counter statistics
timechart Tool to visualize total system behavior during a workload
top System profiling tool.
trace Read perf.data (created by perf record) and display trace output
See 'perf help COMMAND' for more information on a specific command.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds new document about perf-bench.
Man page and html will be provided for user.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up initializers in bench.h:
- No need to break the line for function prototypes, they are more
readable in a single line. (even if checkpatch complains about it
- We try to align definitions / structure fields vertically,
to make it all a bit more readable.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
This patch modifies builtin-pipe.c for processing common
options. The first option added is "--format".
Users of perf bench will be able to specify output style by
--format.
Usage example:
% ./perf bench sched pipe # with no style specify
(executing 1000000 pipe operations between two tasks)
Total time:5.855 sec
5.855061 usecs/op
170792 ops/sec
% ./perf bench --format=simple sched pipe # specified simple
5.988
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-5-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
This patch modifies builtin-bench.c for processing common
options. The first option added is "--format".
Users of perf bench will be able to specify output style by
--format.
Usage example:
% ./perf bench sched messaging # with no style specify
(20 sender and receiver processes per group)
(10 groups == 400 processes run)
Total time:1.431 sec
% ./perf bench --format=simple sched messaging # specified
simple 1.431
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds some constants and extern declaration to
bench.h. These are used for unified output formatting
of 'perf bench'.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo reported this small 'perf bench sched pipe' output problem:
| $ ./perf bench sched pipe
| (executing 1000000 pipe operations between two tasks)
|
| Total time:4.898 sec
| $ 4.898586 usecs/op
| 204140 ops/sec
|
| the shell prompt came back before the usecs/op and ops/sec line
| was printed. Process teardown race, lack of wait() or so?
This caused by lack of calling waitpid() by parent process,
so I added it.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257737465-7546-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
modify perf.c get_debugfs_mntpnt() to use the util/debugfs.c
debugfs_find_mountpoint()
modify util/parse-events.c to use debugfs_valid_mountpoint().
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155720.624cc87e@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add routines to locate the debugfs mount point and to manage the
mounting and unmounting of the debugfs.
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155621.2b3503ee@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The perf_event_open() system call returns EACCES if the user is
not root which results in a very confusing error message:
$ perf record -A -a -f
Error: perfcounter syscall returned with -1 (Permission denied)
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
It turns out that's because perf tools are checking only for
EPERM. Fix that up to get a much better error message:
$ perf record -A -a -f
Fatal: Permission error - are you root?
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1257696066-4046-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With this change 'perf record' will intercept PERF_RECORD_MMAP
calls, creating a linked list of DSOs, then when the session
finishes, it will traverse this list and read the buildids,
stashing them at the end of the file and will set up a new
feature bit in the header bitmask.
'perf report' will then notice this feature and populate the
'dsos' list and set the build ids.
When reading the symtabs it will refuse to load from a file that
doesn't have the same build id. This improves the
reliability of the profiler output, as symbols and profiling
data is more guaranteed to match.
Example:
[root@doppio ~]# perf report | head
/home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols
# Samples: 2621434559
#
# Overhead Command Shared Object Symbol
# ........ ............... ............................. ......
#
7.91% init [kernel] [k] read_hpet
7.64% init [kernel] [k] mwait_idle_with_hints
7.60% swapper [kernel] [k] read_hpet
7.60% swapper [kernel] [k] mwait_idle_with_hints
3.65% init [kernel] [k] 0xffffffffa02339d9
[root@doppio ~]#
In this case the 'perf' binary was an older one, vanished,
so its symbols probably wouldn't match or would cause subtly
different (and misleading) output.
Next patches will support the kernel as well, reading the build
id notes for it and the modules from /sys.
Another patch should also introduce a new plumbing command:
'perf list-buildids'
that will then be used in porcelain that is distro specific to
fetch -debuginfo packages where such buildids are present. This
will in turn allow for one to run 'perf record' in one machine
and 'perf report' in another.
Future work on having the buildid sent directly from the kernel
in the PERF_RECORD_MMAP event is needed to close races, as the
DSO can be changed during a 'perf record' session, but this
patch at least helps with non-corner cases and current/older
kernels.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies Makefile for new files related to 'bench'
subcommand. The new code is active from this point on.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-8-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds bench/sched-pipe.c.
bench/sched-pipe.c is a benchmark program
to measure performance of pipe() system call.
This benchmark is based on pipe-test-1m.c by Ingo Molnar:
http://people.redhat.com/mingo/cfs-scheduler/tools/pipe-test-1m.c
Example of use:
% perf bench sched pipe
(executing 1000000 pipe operations between two tasks)
Total time:4.499 sec
4.499179 usecs/op
222262 ops/sec
% perf bench sched pipe -s -l 1000
0.015
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds bench/sched-messaging.c.
This benchmark measures performance of scheduler and IPC
mechanisms, and is based on hackbench by Rusty Russell.
Example of usage:
% perf bench sched messaging -g 20 -l 1000 -s
5.432 # in sec
% perf bench sched messaging # run with default
options (20 sender and receiver processes per group)
(10 groups == 400 processes run)
Total time:0.308 sec
% perf bench sched messaging -t -g 20 # # be multi-thread,
with 20 groups (20 sender and receiver threads per group)
(20 groups == 800 threads run)
Total time:0.582 sec
( Rusty is the original author of hackbench.c and he said the code is
and was under the GPLv2 so fine to be merged. )
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fall back to non-dwarf probe point if the probe definition may
not need dwarf analysis, when perf can't find vmlinux/debuginfo.
This might skip some inlined code of target function.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001229.3454.63987.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can run it without having a DSO instance.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257291970-8208-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
tools/perf/Makefile
Merge reason: Resolve the conflict, merge to upstream and merge in
perf fixes so we can add a dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Brown paper bag bug introduced in:
66bd8424cc ("perf tools: Delay
loading symtabs till we hit a map with it")
Without this we were not loading any symtabs that happened to be
on a DSO for which the allocated memory for ->loaded was !0.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257270738-5669-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Annotate away this false positive warning on older GCCs:
cc1: warnings being treated as errors
builtin-probe.c: In function ‘parse_probe_event’:
builtin-probe.c:72: warning: ‘nc’ is used uninitialized in this function
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1257254947-16789-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix:
util/map.c: In function ‘map__find_symbol’:
util/map.c:97: error: field precision should have type ‘int’, but argument 3 has type ‘size_t’
Also clean up some line wrap damage - we dont line-wrap printk
messages.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of:
no symbols found in /usr/lib/gstreamer-0.10/libgsttypefindfunctions.so (deleted), maybe install a debug package?
no symbols found in /usr/lib/gstreamer-0.10/libgstaudioconvert.so (deleted), maybe install a debug package?
We now emit:
/usr/lib/gstreamer-0.10/libgsttypefindfunctions.so was updated, restart the long running apps that use it!
/usr/lib/gstreamer-0.10/libgstaudioconvert.so was updated, restart the long running apps that use it!
Which is far less misleading about what the cause of the
symbol mismatch is.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before we were storing this in the DSO, but in fact this is a
property of the 'symbol' class, not something that will vary
among DSOs, so move it to a global variable and initialize it
using the existing symbol__init routine.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add function-entry relative line number specifying support to
perf-probe. This allows users to define probes by line number
from entry of the function.
e.g.
perf probe schedule:16
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204319.30545.30678.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This changes probe point syntax of perf-probe as below
<SRC>[:ABS_LN] [ARGS]
or
<FUNC>[+OFFS|%return][@SRC] [ARGS]
And event name and event group name are automatically
generated based on probe-symbol and offset as below.
perfprobes/SYMBOL_OFFSET[_NUM]
Where SYMBOL is the probing symbol and OFFSET is
the byte offset from the symbol.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204310.30545.84984.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Exit searching after finding real (not-inlined) function,
because there should be no same symbol in that CU.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204252.30545.19251.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can have a quicker start on perf top and even
speedups in the other tools, as we can have maps with no hits,
so no need to load its symtabs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256773881-4191-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add two more software events that are common to many cpus.
Alignment faults: When a load or store is not aligned properly.
Emulation faults: When an instruction is emulated in software.
Both cause a very significant slowdown (100x or worse), so identifying and
fixing them is very important.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Writing to stdout is probably the expected behavior because the
user explicitly asked for a list.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ebb59420ef057972167.1256603585@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Previously no indication was given about what went wrong.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <03ec9ee96f17cef05424.1256603584@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because we will need it in 'perf top' to support userspace
symbols for existing threads.
Now we pass a callback that will receive the synthesized event
and then write it to the output file in 'perf record' and in the
upcoming patch for 'perf top' we will just immediatelly create
the in memory representation of threads and maps.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256592199-9608-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For the perf tool the patch implements an Alpha specific section
in the perf.h header file.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256545926-6972-1-git-send-email-mcree@orcon.net.nz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The present use of -Wcast-align causes the build to blow up on
SH due to generating a "cast increases required alignment of
target type" error on each invocation of list_for_each_entry().
It seems that this was previously reported and killed off in the
ia64 support patch, but nothing seems to have happened with
that. Presumably the same problem still remains there, too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
LKML-Reference: <20091026054000.GA13517@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The Makefile now automatically defines LIBELF_NO_MMAP when
libelf 0.8.x is detected. libelf 0.8 is still maintained and
some distributions such as Arch Linux use it instead of
elfutils.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256400636.3007.16.camel@newn>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use the new pr_{err,warning,debug,etc} printout methods, just
like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
[ Split this patch out, to keep perf/probes separate. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
tools/perf/Makefile
Merge reason:
- fix the conflict
- pick up the pr_*() infrastructure to queue up dependent patch
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We were using eprintf in some places, that looks at a global
'verbose' level, and at other places passing a 'v' parameter to
specify the verbosity level, unify it by introducing
pr_{err,warning,debug,etc}, just like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Wrapping the kernel headers is dangerous when it comes to arch
headers. Once we wrap asm/types.h, it will also replace the
glibc asm/types.h, not only the kernel one.
This results in build errors on some machines.
Drop this wrapper and do its work from linux/types.h wrapper,
also the glibc asm/types.h can already handle most of the type
definition it was doing (typedef __u64, __u32, etc...).
Todo: Check the others asm/*.h wrappers to prevent from other
conflicts.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, the callchains are displayed using a constant left
margin. So depending on the current sort dimension
configuration, callchains may appear to be well attached to the
first sort dimension column field which is mostly the case,
except when the first dimension of sorting is done by comm,
because these are right aligned.
This patch binds the callchain to the first letter in the first
column, whatever type of column it is (dso, comm, symbol).
Before:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
After:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
Also, for clarity, we don't put anymore the callchain as is but:
- If we have a top level ancestor in the callchain, start it
with a first ascii hook.
Before:
0.80% perf [kernel] [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
After:
0.80% perf [kernel] [k] __lock_acquire
|
--- __lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
- Otherwise, if we have several top level ancestors, then
display these like we did before:
1.69% Xorg
|
|--21.21%-- vread_hpet
| 0x7fffd85b46fc
| 0x7fffd85b494d
| 0x7f4fafb4e54d
|
|--15.15%-- exaOffscreenAlloc
|
|--9.09%-- I830WaitLpRing
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While recursively printing the branches of each callchains, we
forget to display the root. It is never printed.
Say we have:
symbol
f1
f2
|
-------- f3
| f4
|
---------f5
f6
Actually we never see that, instead it displays:
symbol
|
--------- f3
| f4
|
--------- f5
f6
However f1 is always the same than "symbol" and if we are
sorting by symbols first then "symbol", f1 and f2 will be well
aligned like in the above example, so displaying f1 looks
redundant here.
But if we are sorting by something else first (dso, comm,
etc...), displaying f1 doesn't look redundant but rather
necessary because the symbol is not well aligned anymore with
its callchain:
comm dso symbol
f1
f2
|
--------- [...]
And we want the callchain to be obvious.
So we fix the bug by printing the root branch, but we also
filter its first entry if we are sorting by symbols first.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256246604-17156-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The second argument in the strtok_r() function is not to be used
generically and can have different implementations. Currently
the function parsing of the perf trace code uses the second
argument to copy data from. This can crash the tool or just have
unpredictable results.
The correct solution is to use strsep() which has a defined
result.
I also added a check to see if the result was correct, and will
break out of the loop in case it fails to parse as expected.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020232034.237814877@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When using gdb to debug perf, it is practically impossible to
use when perf is compiled with -O6. For developers, this patch
adds the DEBUG feature to the make command line so that a
developer can easily remove the optimization flag.
LKML-Reference: <1255590330.8392.446.camel@twins>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091020232033.984323261@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to use map->unmap_ip() here too to match section
relative symbol address to the absolute address needed to match
objdump -dS addresses.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256061295-19835-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the user doesn't pass a symbol name to annotate, it will
annotate all the symbols that have hits, in order, just like
'perf report -s comm,dso,symbol'.
This is a natural followup patch to the one that uses
output_hists to find the symbols with hits.
The common case is to annotate the first few entries at the top
of a perf report, so lets type less characters.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256058509-19678-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have this sym_priv_size mechanism for attaching private areas
to struct symbol entries but annotate wasn't using it, adding
private areas to struct symbol in addition to a ->priv pointer.
Scrap all that and use the sym_priv_size mechanism.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256055940-19511-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need this because we get section relative addresses when
reading the symtabs, but when a tool like 'perf annotate' needs
to match these address to what 'objdump -dS' produces we need
the address + section back again.
So in annotate now we look at the 'struct hist_entry' instances
(that weren't really being used) so that we iterate only over
the symbols that had some hit and get the map where that
particular hit happened so that we can get the right address to
match with annotate.
Verified that at least:
perf annotate mmap_read_counter # Uses the ~/bin/perf binary
perf annotate --vmlinux /home/acme/git/build/perf/vmlinux intel_pmu_enable_all
on a 'perf record perf top' session seems to work.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1255979877-12533-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
During the Kernel Summit demo of perf/ftrace/timechart, there
was a feature request to have a process filter for timechart so
that you can zoom into one or a few processes that you are
really interested in.
This patch adds basic support for this feature, the -p
(--process) option now can select a PID or a process name to be
shown. Multiple -p options are allowed, and the combined set
will be included in the output.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020070939.7d0fb8a7@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[from KS feedback]
Currently, scheduler delays are shown in a mostly transparent,
light yellow color. This color is rather hard to see on several
screens, especially projectors.
This patch changes the color of the scheduler delays to be a
much more "hard" yellow that survived the kernel summit
projector.
Reported-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020064731.20ae126a@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The timechart wakeup arrows currently show no process
information when the waker/wakee are processes that are not
actually chosen to be shown on the timechart.
This patch fixes this oversight, by looking through all
processes (after giving preference to visible processes) as well
as falling back to just showing the PID if no name for the
process can be resolved.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020064649.0e4959b2@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To cure a bunch of:
In file included from util/include/linux/bitmap.h:1,
from util/header.h:8,
from builtin-trace.c:7:
util/include/../../../../include/linux/bitmap.h:8:26: error:
linux/string.h: No such file or directory make: ***
[builtin-trace.o] Error 1 make: *** Waiting for unfinished
jobs....
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1255972296-11500-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds performance event information about branches
and branch misses to the default output of perf stat.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Check for libelf headers and glibc headers separately so that
the error message correctly identifies which package
installation is missing/needed.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
Cc: efault@gmx.de
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <4ADBCCE8.3060300@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add delay_secs sanity check to handle_keypress,
this fixes a division by zero crash.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4AD9EBFD.106@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use DECLARE_BITMAP instead of an open coded array for our bitmap
of featured sections.
This makes the array an unsigned long instead of a u64 but since
we use a 256 bits bitmap, the array size shouldn't vary between
different boxes.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255795038-13751-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This provides a new set of bitmasked headers. A new field is
added in the perf headers that implements a bitmap storing
optional features present in the perf.data file.
The layout can be pictured like this:
(Usual perf headers)(Features bitmap)[Feature 0][Feature
n][Feature 255]
If the bit n is set, then the feature n is used in this file.
They are all set in order. This brings a backward and forward
compatibility.
The trace_info section has moved into such optional features,
this is the first and only one for now.
This is backward compatible with the .32 file version although
it doesn't support the previous separate trace.info file.
And finally it doesn't support the current interim development
version.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255792354-11304-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we count both branches and branch-misses it is useful to
print out the percentage of branch-misses:
# perf stat -e branches -e branch-misses /bin/true
Performance counter stats for '/bin/true':
401684 branches # 0.000 M/sec
23301 branch-misses # 5.801 %
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <20091018112923.GQ4808@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use die() for exiting perf-probe with errors. This replaces
perror_exit(), msg_exit() and fprintf()+exit() with die(), and
uses die() in semantic_error().
This also renames 'die' local variables to 'dw_die' for avoiding
name confliction.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000801.16556.46866.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Check libdwarf APIs for perf probe in tools/perf/Makefile. Since
dwarf_get_ranges() has been added from libdwarf 20081231 (and
it's the newest function used in probe-finder.c), this just
checks whether the function is defined.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000752.16556.92051.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In each case, if the NULL test on thread is needed, then the
dereference should be after the NULL test.
A simplified version of the semantic match that detects this
problem is as follows (http://coccinelle.lip6.fr/):
// <smpl>
@match exists@
expression x, E;
identifier fld;
@@
* x->fld
... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
LKML-Reference: <Pine.LNX.4.64.0910170842500.9213@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We released the first version of perf with 0.0.1 in v2.6.31,
time to double our version number to 0.0.2 ;-)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a new option "--filter <filter_str>" to perf record, and
it should be right after "-e trace_point":
#./perf record -R -f -e irq:irq_handler_entry --filter irq==18
^C
# ./perf trace
perf-4303 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
init-0 ... irq_handler_entry: irq=18 handler=eth0
See Documentation/trace/events.txt for the syntax of filter
expressions.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD6955F.90602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The (char *) for all the static strings was a fix for the
symptom and not the disease. The real issue was that the
function prototypes needed to be declared "const char *".
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.635935008@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The opterators '-' and '+' are not handled in the trace print
format.
To do: '++' and '--'.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.330843045@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the irqs disabled, preemption count, need resched, and other
info that is shown in the latency format of ftrace.
# perf trace -l
perf-16457 2..s2. 53636.260344: kmem_cache_free: call_site=ffffffff811198f
perf-16457 2..s2. 53636.264330: kmem_cache_free: call_site=ffffffff811198f
perf-16457 2d.s4. 53636.300006: kmem_cache_free: call_site=ffffffff810d889
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.076588953@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ftrace output events can have either arguments or no
arguments. The parser needs to be able to handle both.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.790221427@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The bprintk parsing was broken in more ways than one.
The file parsing was incorrect, and the words used by the
arguments are always 4 bytes aligned, even on 64-bit machines.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.520931637@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Even though an event may fail to parse, we should not kill the
entire report. The trace should still be able to show what it
can.
If an event fails to parse, a warning is printed, and the output
continues.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.190809589@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The trace format files now have a "signed" field. But we should
still be able to handle the kernels that do not have this field.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.888239553@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
New lines between args in the trace format can break the
parsing. This should not be the case.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.637991808@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The '*' is currently only treated as a multiplication, and it
needs to be handled as a typecast pointer.
This is the version used by trace-cmd.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.409327875@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The array used by the ftrace stack events (caller[x]) causes
issues with the parser. This adds code to handle the case, but
it also assumes that the array is of type long.
Note, this is a special case used (currently) only by the ftrace
user and kernel stack records.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.124833639@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The code to handle the '<' and '>' ops was all in place, but
they were not in the switch statement to consider them as valid
ops.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.807434040@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The handling of backslashes was broken. It would stop parsing
when encountering one. Also, '\n', '\t', '\r' and '\\' were not
converted.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.521974680@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kmem_alloc ftrace event format had a string that was broken up
by two tokens. "string 1" "string 2". This patch lets the parser
be able to handle the concatenation.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.253818714@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This was just being copy'n'pasted all over.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091013141629.GD21809@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Calling gettimeofday() at high frequency is painful for handicapped
boxen. The spot calling gettimeofday() is old unneeded debug code,
so remove it.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1255438640.7173.1.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use strlen & macros instead of manually counting string lengths as
this is error prone and may lend to bugs.
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Cc: Linus Torvalds <torvalds@osdl.org>
LKML-Reference: <4727185d0910130118m5387058dndb02ac9b384af9f0@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Enables 'perf probe' even if libdwarf is not installed. If libdwarf is
not found, 'perf probe' just disables dwarf support. Users can use
'perf probe' to set up new events by using kprobe_events format.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222830.1684.25665.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add perf probe subcommand that implements a kprobe-event setup helper
to the perf command.
This allows user to define kprobe events using C expressions (C line
numbers, C function names, and C local variables).
Usage
-----
perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...]
-k, --vmlinux <file> vmlinux/module pathname
-P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]>
probe point definition, where
p: kprobe probe
r: kretprobe probe
GRP: Group name (optional)
NAME: Event name
FUNC: Function name
OFFS: Offset from function entry (in byte)
SRC: Source code path
LINE: Line number
ARG: Probe argument (local variable name or
kprobe-tracer argument format is supported.)
Changes in v4:
- Add _GNU_SOURCE macro for strndup().
Changes in v3:
- Remove -r option because perf always be used for online kernel.
- Check malloc/calloc results.
Changes in v2:
- Check synthesized string length.
- Rename perf kprobe to perf probe.
- Use spaces for separator and update usage comment.
- Check error paths in parse_probepoint().
- Check optimized-out variables.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Timechart doesn't work if debugfs is not in /sys/kernel/debug/.
Fixed by using global debugfs_path which is filled in by perf.
Signed-off-by: Ashwin Chaugule <ashwinc@quicinc.com>
Cc: "Arjan van de Ven" <arjan@linux.intel.com>
LKML-Reference: <a751bdc6978478de6d10440e587a2cc7.squirrel@www.codeaurora.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Randy Dunlap reported that 'make NO_64BIT=1' fails to build
a pure 32-b it binary on 64-bit/64-bit x86 systems.
The reason is that we dont pass in the -m32 and GCC defaults
to -m64.
So pass it in - and also extend the warning message about libelf
dependencies - glibc-dev[el] is needed as well beyond the libelf
library.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: Message-Id: <20091005131729.78444bfb.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 42e59d7d19 switched to a default sample frequency of
1KHz, which overrides any user supplied count, causing sched, top
and timechart to miss events due to their discrete events
being flagged PERF_SAMPLE_PERIOD.
Override default sample frequency when the user profides a
period count, and make both record and top honor that user
supplied option.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <1255326963.15107.2.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The following perf build warnings/errors in function
argument types:
builtin-sched.c:1894: warning: passing argument 1 of 'sort_dimension__add' discards qualifiers from pointer target type
util/trace-event-parse.c:685: warning: passing argument 2 of 'read_expected' discards qualifiers from pointer target type
util/trace-event-parse.c:741: warning: passing argument 4 of 'test_type_token' discards qualifiers from pointer target type
util/trace-event-parse.c:706: warning: passing argument 2 of 'read_expected_item' discards qualifiers from pointer target type
... trigger because older GCC is not able to prove that
sort_dimension__add() does not change the string.
Some goes for test_type_token().
Fix this by improving type consistency.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091005131729.78444bfb.randy.dunlap@oracle.com>
[ Also remove ugly type cast now unnecessary. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have merged the trace.info file into perf.data by adding one
section in the perf headers. This makes it incompatible with
previous version: the new perf tools can't read the older
perf.data.
To support the previous format, we check the headers size. If they
have the same size than in the previous format, then ignore the
trace info section that doesn't exist.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255032449-12022-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit 9a92b479b2 ("perf
tools: Improve thread comm resolution in perf sched") and fixes the
real bug.
The bug was elsewhere:
We are failing to resolve thread names in perf sched because the
table of threads we are building, on top of comm events, has a per
process granularity. But perf sched, unlike the other perf tools,
needs a per thread granularity as we are profiling every tasks
individually.
So fix it by building our threads table using the tid instead of
the pid as the thread identifier.
v2: Revert the previous fix - it is not really needed
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255028657-11158-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This removes the ovelapping of vmlinux addresses with modules,
using the ELF section name when using --vmlinux and creating a
unique DSO name when using /proc/kallsyms ([kernel].N).
This is done by creating multiple 'struct map' instances for
address ranges backed by DSOs that have just the symbols for that
range and a name that is derived from the ELF section name.o
Now it is possible to ask for just the symbols in some particular
kernel section:
$ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \
--dsos [kernel].vsyscall_fn | head -15
52.73% Xorg [.] vread_hpet
18.61% firefox [.] vread_hpet
14.50% npviewer.bin [.] vread_hpet
6.83% compiz [.] vread_hpet
5.73% glxgears [.] vread_hpet
0.63% java [.] vread_hpet
0.30% gnome-terminal [.] vread_hpet
0.23% perf [.] vread_hpet
0.18% xchat [.] vread_hpet
$
Now we don't have to first lookup the list of modules and then, if
it fails, vmlinux symbols, its just a simple lookup for the map
then the symbols, just like for threads.
Reports generated using /proc/kallsyms and --vmlinux should provide
the same results, modulo the DSO name for sections other than
".text".
But they don't right now because things like:
ffffffff81011c20-ffffffff81012068 system_call
ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs
ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath
ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call
I.e. overlapping symbols, again some ASM special case that we have
to fixup.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Like printing every symbol created.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254923340-4870-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we get sched traces that involve a task that was already
created before opening the event, we won't have the comm event for
it.
So if we can't find the comm event for a given thread, we look at
the traces that may contain these informations.
Before:
ata/1:371 | 0.000 ms | 1 | avg: 3988.693 ms | max: 3988.693 ms |
kondemand/1:421 | 0.096 ms | 3 | avg: 345.346 ms | max: 1035.989 ms |
kondemand/0:420 | 0.025 ms | 3 | avg: 421.332 ms | max: 964.014 ms |
:5124:5124 | 0.103 ms | 5 | avg: 74.082 ms | max: 277.194 ms |
:6244:6244 | 0.691 ms | 9 | avg: 125.655 ms | max: 271.306 ms |
firefox:5080 | 0.924 ms | 5 | avg: 53.833 ms | max: 257.828 ms |
npviewer.bin:6225 | 21.871 ms | 53 | avg: 22.462 ms | max: 220.835 ms |
:6245:6245 | 9.631 ms | 21 | avg: 41.864 ms | max: 213.349 ms |
After:
ata/1:371 | 0.000 ms | 1 | avg: 3988.693 ms | max: 3988.693 ms |
kondemand/1:421 | 0.096 ms | 3 | avg: 345.346 ms | max: 1035.989 ms |
kondemand/0:420 | 0.025 ms | 3 | avg: 421.332 ms | max: 964.014 ms |
firefox:5124 | 0.103 ms | 5 | avg: 74.082 ms | max: 277.194 ms |
npviewer.bin:6244 | 0.691 ms | 9 | avg: 125.655 ms | max: 271.306 ms |
firefox:5080 | 0.924 ms | 5 | avg: 53.833 ms | max: 257.828 ms |
npviewer.bin:6225 | 21.871 ms | 53 | avg: 22.462 ms | max: 220.835 ms |
npviewer.bin:6245 | 9.631 ms | 21 | avg: 41.864 ms | max: 213.349 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255012632-7882-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This librarizes the perf.data file mapping and handling in various
perf tools, roughly reducing the amount of code and fixing the
places that mmap from beginning of the file whereas we want to mmap
from the beginning of the data, leading to page fault because the
mmap window is too small since the trace info are written in the
file too.
TODO:
- convert perf timechart too
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091007104729.GD5043@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This drops the trace.info file and move its contents into the
common perf.data file.
This is done by creating a new trace_info section into this file. A
user of perf headers needs to call perf_header__set_trace_info() to
save the trace meta informations into the perf.data file.
A file created by perf after his patch is unsupported by previous
version because the size of the headers have increased.
That said, it's two new fields that have been added in the end of
the headers, and those could be ignored by previous versions if
they just handled the dynamic header size and then ignore the
unknow part. The offsets guarantee the compatibility. We'll do a
-stable fix for that.
But current previous versions handle the header size using its
static size, not dynamic, then it's not backward compatible with
trace records.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091006213643.GA5343@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, we are mapping perf.data in the beginning of the file
and use the data offset as a buffer offset.
This may exceed the mapping area if the data offset is upper than
page_size * mmap_window and result in a page fault (thing that
happen if we merge trace.info in perf.data).
Instead, let's start the mapping in the page that matches our data
offset.
v2: Drop a junk from another patch (trace_report() removal)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1254856886-10348-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use auto-freq events by default in perf record and
perf top.
This allows more consistent hardware event sampling,
regardless of the intensity of the underlying event.
It also keeps us from over-sampling on larger/busier
systems.
(also make surrounding initializations more consistent)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The sign info used for filters in the kernel is also useful to
applications that process the trace stream. Add it to the format
files and make it available to userspace.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: hch@infradead.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254809398-8078-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some architectures such as Sparc, ARM and MIPS (basically
everything with flush_dcache_page()) need to deal with dcache
aliases by carefully placing pages in both kernel and user maps.
These architectures typically have to use vmalloc_user() for this.
However, on other architectures, vmalloc() is not needed and has
the downsides of being more restricted and slower than regular
allocations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1254830228.21044.272.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Asm routines that end up having size equal to zero are not really
zero sized, and as now we do kernel_maps__fixup_sym_end, at least
for kernel routines this gets fixed.
A similar fixup needs to be done for the userspace bits as well,
but as this fixup started only because in /proc/kallsyms we don't
have the end address nor the function size, it appeared here first.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254796503-27203-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In resolve_symbol, as we're moving to breaking the kernel symbols
list per address ranges, i.e. kernel linking sections, so that we
don't have a big kernel_map that in its range covers what is in the
modules.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we get kallsyms processing closer to vmlinux + modules
symtabs processing.
One change in behaviour is that since when one specifies --vmlinux
-m should be used to ask for modules, so it is now for kallsyms as
well.
Also continue if one manages to load the vmlinux data but module
processing fails, so that at least some analisys can be done with
part of the needed symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we launch the child on behalf of the user, ensure that it dies
along with ourselves when we are interrupted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
LKML-Reference: <1254616502-4728-1-git-send-email-chris@chris-wilson.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now perf report and annotate do the callgraph/hit processing in
their specialized hist_entry__add functions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Representing modules as struct map entries, backed by a DSO, etc,
using /proc/modules to find where the module is loaded.
DSOs now can have a short and long name, so that in verbose mode we
can show exactly which .ko or vmlinux image was used.
As kernel modules now are a DSO separate from the kernel, we can
ask for just the hits for a particular set of kernel modules, just
like we can do with shared libraries:
[root@doppio linux-2.6-tip]# perf report -n --vmlinux
/home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15
84.58% 13266 Xorg [k] drm_clflush_pages
4.02% 630 Xorg [k] trace_kmalloc.clone.0
3.95% 619 Xorg [k] drm_ioctl
2.07% 324 Xorg [k] drm_addbufs
1.68% 263 Xorg [k] drm_gem_close_ioctl
0.77% 120 Xorg [k] drm_setmaster_ioctl
0.70% 110 Xorg [k] drm_lastclose
0.68% 106 Xorg [k] drm_open
0.54% 85 Xorg [k] drm_mm_search_free
[root@doppio linux-2.6-tip]#
Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko
would have the same effect. Allowing specifying just 'drm.ko' is left
for another patch.
Processing kallsyms so that per kernel module struct map are
instantiated was also left for another patch. That will allow
removing the module name from each of its symbols.
struct symbol was reduced by removing the ->module backpointer and
moving it (well now the map) to struct symbol_entry in perf top,
that is its only user right now.
The total linecount went down by ~500 lines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Right now generate-cmdlist.sh is not executable, so we
should call it as an argument ".".
This fixes cases where due to different umask defaults
the generate-cmdlist.sh script is not executable in
a kernel tree checkout.
Signed-off-by: Mulyadi Santosa <mulyadi.santosa@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <f284c33d0909251201w422e9687x8cd3a784e85adf7d@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For doing work on the Linux power management components, I need to
make long (30+ seconds) traces. Currently, this then results in a
HUGE svg file, with mostly process data that isn't interesting.
This patch adds a --power-only mode to perf timechart that only
outputs the CPU power section of the SVG; this significantly
reduces the size of the SVG file, making even 30+ second traces
viewable with inkscape.
As a minor tweak for the same effect, the minimum text size is
decreased; current inkscape cannot zoom in deep enough to show text
this small, but it reduces inkscape compute time.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: peterz@infradead.org
LKML-Reference: <20090924154013.0675ab71@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several variables are not used at all, cut'n'paste leftovers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <20090928200818.GF3361@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several variables are not used at all, cut'n'paste leftovers.
Also check if the sample_type is RAW earlier, to avoid needless
searches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move histogram related functions into their own files (hist.c and
hist.h) and make use of them in builtin-annotate.c and
builtin-report.c.
Signed-off-by: John Kacur <jkacur@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <alpine.LFD.2.00.0909281531180.8316@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
