Commit Graph

24917 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab
6009367e0d media: dvb_frontend.h: improve kernel-doc markups
Several minor adjustments at the kernel-doc markups:

- some syntax fixes;
- some cross-references;
- add cross-references for the mentioned ioctls;
- some constants marked as such.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 13:01:35 -04:00
Mauro Carvalho Chehab
400efa8e4e media: dvbdev: fully document its functions
There are several functions at the dvbdev that are common to all
digital TV device nodes with aren't documented.

Add documentation for them. No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 13:01:13 -04:00
Mauro Carvalho Chehab
6bbf7a855d media: dvbdev: convert DVB device types into an enum
Enums can be documented via kernel-doc. So, convert the
DVB_DEVICE_* macros to an enum.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 13:00:44 -04:00
Mauro Carvalho Chehab
259a41d9ae media: dvb_frontend: fix return values for FE_SET_PROPERTY
There are several problems with regards to the return of
FE_SET_PROPERTY. The original idea were to return per-property
return codes via tvp->result field, and to return an updated
set of values.

However, that never worked. What's actually implemented is:

- the FE_SET_PROPERTY implementation doesn't call .get_frontend
  callback in order to get the actual parameters after return;

- the tvp->result field is only filled if there's no error.
  So, it is always filled with zero;

- FE_SET_PROPERTY doesn't call memdup_user() nor any other
  copy_to_user() function. So, any changes to the properties
  will be lost;

- FE_SET_PROPERTY is declared as a write-only ioctl (IOW).

While we could fix the above, it could cause regressions.

So, let's just assume what the code really does, updating
the documentation accordingly and removing the logic that
would update the discarded tvp->result.

Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:58:40 -04:00
Mauro Carvalho Chehab
da5516b5e8 media: dvb_frontend: better document the -EPERM condition
Two readonly ioctls can't be allowed if the frontend device
is opened in read only mode. Explain why.

Reviewed by: Shuah Khan <shuahkh@osg.samsung.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:57:47 -04:00
Mauro Carvalho Chehab
ceb22c8eee media: dvb_frontend.h: fix alignment at the cache properties
There are too much tabs on several properties, for no good
reason. That sounds confusing while reading the struct, so
adjust them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:55:23 -04:00
Mauro Carvalho Chehab
ef2cc27cf8 media: dvb_frontend: get rid of property cache's state
In the past, I guess the idea was to use state in order to
allow an autofush logic. However, in the current code, it is
used only for debug messages, on a poor man's solution, as
there's already a debug message to indicate when the properties
got flushed.

So, just get rid of it for good.

Reviewed-by: Shuah Khan <shuahkg@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:54:52 -04:00
Mauro Carvalho Chehab
d73dcf0cdb media: dvb_frontend: cleanup ioctl handling logic
Currently, there are two handlers for ioctls:
 - dvb_frontend_ioctl_properties()
 - dvb_frontend_ioctl_legacy()

Despite their names, both handles non-legacy DVB ioctls.

Besides that, there's no reason why to not handle all ioctls
on a single handler function.

So, merge them into a single function (dvb_frontend_handle_ioctl)
and reorganize the ioctl's to indicate what's the current DVB
API and what's deprecated.

Despite the big diff, the handling logic for each ioctl is the
same as before.

Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:54:07 -04:00
Mauro Carvalho Chehab
2b5df42b8d media: dvb_frontend: cleanup dvb_frontend_ioctl_properties()
Use a switch() on this function, just like on other ioctl
handlers and handle parameters inside each part of the
switch.

That makes it easier to integrate with the already existing
ioctl handler function.

Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:53:09 -04:00
Mauro Carvalho Chehab
6680e73b52 media: dvb_frontend: get rid of set_property() callback
Now that all clients of set_property() were removed, get rid
of this callback.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:52:16 -04:00
Mauro Carvalho Chehab
8f8a19fcc1 media: dvb_frontend: get rid of get_property() callback
Only lg2160 implement gets_property, but there's no need for that,
as no other driver calls this callback, as get_frontend() does the
same, and set_frontend() also calls lg2160 get_frontend().

So, get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:51:36 -04:00
Mauro Carvalho Chehab
b2c41ca963 media: friio-fe: get rid of set_property()
This callback is not actually doing anything but making it to
return an error depending on the DTV frontend command. Well,
that could break userspace for no good reason, and, if needed,
should be implemented, instead, at set_frontend() callback.

So, get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:49:55 -04:00
Mauro Carvalho Chehab
282996925b media: stv6110: get rid of a srate dead code
The stv6110 has a weird code that checks if get_property
and set_property ioctls are defined. If they're, it initializes
a "srate" var from properties cache. Otherwise, it sets to
15MBaud, with won't make any sense.

Thankfully, it seems that someone else discovered the issue in
the past, as "srate" is currently not used anywhere!

So, get rid of that really weird dead code logic.

Reported-by: Honza Petrous <jpetrous@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:49:20 -04:00
Mauro Carvalho Chehab
473e4b4c1c media: stv0288: get rid of set_property boilerplate
This driver doesn't implement support for set_property(). Yet,
it implements a boilerplate for it. Get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:48:39 -04:00
Sean Young
950db1a80e media: rc: ir-spi needs OF
Without device tree, there is no way to use this driver.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:42:09 -04:00
Sean Young
3e45067f94 media: rc: check for integer overflow
The ioctl LIRC_SET_REC_TIMEOUT would set a timeout of 704ns if called
with a timeout of 4294968us.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:41:52 -04:00
Mans Rullgard
d345527331 media: rc: Add driver for tango HW IR decoder
The tango HW IR decoder supports NEC, RC-5, RC-6 protocols.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:41:08 -04:00
Marc Gonzalez
5248e34b3f media: rc: Add tango keymap
Add a keymap for the Sigma Designs Vantage (dev board) remote control.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:40:36 -04:00
Sean Young
a840f3c7fb media: rc: hix5hd2 drivers needs OF
Without device tree, there is no way to use this driver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:39:55 -04:00
Sean Young
2d726aaab2 media: rc: pwm-ir-tx needs OF
Without device tree, there is no way to use this driver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:39:37 -04:00
Sean Young
5288879390 media: rc: gpio-ir-tx does not work without devicetree or gpiolib
If the kernel is built without device tree, this driver cannot be
used and without gpiolib it cannot control any gpio pin.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:38:20 -04:00
Sean Young
829bbf2688 media: rc: nec decoder should not send both repeat and keycode
When receiving an nec repeat, rc_repeat() is called and then rc_keydown()
with the last decoded scancode. That last call is redundant.

Fixes: 265a2988d2 ("media: rc-core: consistent use of rc_repeat()")

Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:37:53 -04:00
David Härdeman
2265425fd9 media: lirc_dev: remove min_timeout and max_timeout
There are no users of this functionality (ir-lirc-codec.c has its own
implementation and lirc_zilog.c doesn't use it) so remove it.

This only affects users of the lirc kapi, not rc-core drivers.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-11 12:37:36 -04:00
Ladislav Michl
c130107721 [media] media: rc: fix gpio-ir-receiver build failure
The 0-day robot reports:

   drivers/media/rc/gpio-ir-recv.c: In function 'gpio_ir_recv_irq':
>> drivers/media/rc/gpio-ir-recv.c:38:8: error: implicit declaration of function 'gpiod_get_value' [-Werror=implicit-function-declaration]

Fixes: eed008e605 ("[media] media: rc: gpio-ir-recv: use gpiolib API")

For some reason only partial patch was applied. Also include
gpio/consumer.h otherwise compile test fails.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Sean Young <sean@mess.org>
2017-10-05 10:16:21 -03:00
Sakari Ailus
ccec44cc91 [media] smiapp: Make clock control optional
The clock control is not explicitly controlled by the driver in two cases:
ACPI based systems and when the clock is part of the power sequence of the
camera module.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:25:26 -03:00
Sakari Ailus
de10c1619c [media] smiapp: Get clock rate if it's not available through DT
Obtain the clock rate from the clock framework if it's not available
through DT. The assumption is that the parent device (camera module)
defines the rate as clock control is a part of the power on and power off
sequences --- which are camera module specific.

Also use the clock rate from DT if no clock is provided.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:24:55 -03:00
Sakari Ailus
f689866aec [media] smiapp: Verify clock frequency after setting it, prevent changing it
The external clock frequency was set by the driver but the obtained
frequency was never verified. Do that.

Being able to obtain the exact frequency is important as the value is used
for PLL calculations which may result in frequencies that violate the PLL
tree limits.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:24:11 -03:00
Sakari Ailus
d339ec6a42 [media] smiapp: Fix error handling in power on sequence
The error handling code in smiapp_power_on() returned in case of a failed
I2C write instead of cleaning up the mess. Fix this.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:23:37 -03:00
Sakari Ailus
880d45f8fc [media] ov13858: Use do_div() for dividing a 64-bit number
ov13858 contained a 64-bit division. Use do_div() for calculating it.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:23:13 -03:00
Chiranjeevi Rapolu
58020c9f14 [media] media: ov13858: Fix 4224x3136 video flickering at some vblanks
Previously, with crop (0, 0), (4255, 3167), VTS < 0xC9E was resulting in
blank frames sometimes. This appeared as video flickering. But we need VTS
< 0xC9E to get ~30fps.

Omni Vision recommends to use crop (0,8), (4255, 3159) for 4224x3136. With
this crop, VTS 0xC8E is supported and yields ~30fps.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:22:37 -03:00
Chiranjeevi Rapolu
6f2a0594ae [media] media: ov13858: Calculate pixel-rate at runtime, use mode
Calculate pixel-rate at run time instead of compile time.

Instead of using hardcoded pixels-per-line, extract it from current sensor
mode.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:22:09 -03:00
Colin Ian King
91c158dd26 [media] ov2640: make array reset_seq static, reduces object code size
Don't populate the array reset_seq on the stack, instead make it
static.  Makes the object code smaller by over 50 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  11737	   6000	     64	  17801	   4589	drivers/media/i2c/ov2640.o

After:
   text	   data	    bss	    dec	    hex	filename
  11582	   6096	     64	  17742	   454e	drivers/media/i2c/ov2640.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:21:28 -03:00
Sakari Ailus
885ca801e3 [media] media: Check for active and has_no_links overrun
The active and has_no_links arrays will overrun in
media_entity_pipeline_start() if there's an entity which has more than
MEDIA_ENTITY_MAX_PAD pads. Ensure in media_entity_init() that there are
fewer pads than that.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:16:14 -03:00
Markus Elfring
19fab6fe67 [media] i2c: Improve a size determination
Replace the specification of a data structure by pointer dereferences
as the parameter for the operator "sizeof" to make size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensource.com: merged similar patches]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:15:39 -03:00
Markus Elfring
0fd5843589 [media] i2c: Delete an error messages for failed memory allocation
Omit extra messages for memory allocation failures.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensource.com: merged similar patches]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:15:22 -03:00
Chiranjeevi Rapolu
3eefbc69bb [media] media: ov5670: Fix not streaming issue after resume
Previously, the sensor was not streaming after resume from suspend,
i.e. on S0->S3->S0 transition. Due to this, camera app preview appeared
as stuck.

Now, handle streaming state correctly in case of suspend-resume.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:09:47 -03:00
Rajmohan Mani
1a58fbf513 [media] dw9714: Set the v4l2 focus ctrl step as 1
Current v4l2 focus ctrl step value of 16, limits the minimum granularity
of focus positions to 16. Setting this value as 1, enables more accurate
focus positions.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:08:47 -03:00
Fabio Estevam
c3d1478024 [media] ov2640: Check the return value from clk_prepare_enable()
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:08:09 -03:00
Fabio Estevam
877f1af154 [media] ov2640: Propagate the real error on devm_clk_get() failure
devm_clk_get() may return different error codes other than -EPROBE_DEFER,
so it is better to return the real error code instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:07:42 -03:00
Fabio Estevam
bddb4b5335 [media] mt9m111: Propagate the real error on v4l2_clk_get() failure
v4l2_clk_get() may return different error codes other than -EPROBE_DEFER,
so it is better to return the real error code instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:07:18 -03:00
Chiranjeevi Rapolu
99cd12425d [media] media: ov5670: Use recommended black level and output bias
Previously, images were relatively darker due to non-optimal
settings for black target level and bias.

Now, use recommended settings for black target level and output bias
as default values. The same default settings apply to all the resolutions.
Given these recommeneded settings do not change dynamically, add these to
existing mode register settings.

Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:06:49 -03:00
Hans Verkuil
cecfe9b8a5 [media] v4l2-ctrls.c: allow empty control handlers
If you have a control handler that does not contain any controls, then
currently calling VIDIOC_G/S/TRY_EXT_CTRLS with count == 0 will return
-EINVAL in the class_check() function.

This is not correct, there is no reason why this should return an error.

The purpose of setting count to 0 is to test if the ioctl can mix controls
from different control classes. And this is possible. The fact that there
are not actually any controls defined is another matter that is unrelated
to this test.

This caused v4l2-compliance to fail, so that is fixed with this patch applied.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:05:00 -03:00
Hans Verkuil
5b2c8da1b0 [media] cec-gpio: don't generate spurious HPD events
Only send HPD_LOW/HIGH event if the gpio actually changed value.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:04:18 -03:00
Johan Hovold
6c3b047fa2 [media] cx231xx-cards: fix NULL-deref on missing association descriptor
Make sure to check that we actually have an Interface Association
Descriptor before dereferencing it during probe to avoid dereferencing a
NULL-pointer.

Fixes: e0d3bafd02 ("V4L/DVB (10954): Add cx231xx USB driver")

Cc: stable <stable@vger.kernel.org>     # 2.6.30
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 17:03:47 -03:00
Kees Cook
d17dd2db94 [media] media/i2c/tc358743: Initialize timer
This converts to use setup_timer() to set callback and data, though it
doesn't look like this would have worked with timer checking enabled
since no init_timer() was ever called before.

Cc: Mats Randgaard <matrandg@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:59:47 -03:00
Hans Verkuil
02005cb27c [media] vivid: add support for Y10 and Y12
Add support for 10 and 12 bit luma formats.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:59:07 -03:00
Hans Verkuil
b89fdb5e50 [media] v4l2-tpg: add Y10 and Y12 support
Support the 10 and 12 bit luma formats.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:58:39 -03:00
Arnd Bergmann
5dfbf6c51c [media] rcar_drif: fix potential uninitialized variable use
Older compilers like gcc-4.6 may run into a case that returns
an uninitialized variable from rcar_drif_enable_rx() if that
function was ever called with an empty cur_ch_mask:

drivers/media/platform/rcar_drif.c:658:2: error: ‘ret’ may be used uninitialized in this function [-Werror=uninitialized]

Newer compilers don't have that problem as they optimize the
'ret' variable away and just return zero in that case.

This changes the function to return -EINVAL for this particular
failure, to make it consistent across all compiler versions.
In case gcc gets changed to report a warning for it in the
future, it's also a good idea to shut it up now.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82203

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:58:05 -03:00
Bhumika Goyal
ad62701720 [media] saa7146: make saa7146_use_ops const
Make these const as they are not modified in the file referencing them.
They are only used when their function pointer fields invokes a
function and therefore none of the structure fields are getting modified.
Also, add a const to the declaration in the header.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:57:33 -03:00
Colin Ian King
022565200a [media] gspca: make arrays static, reduces object code size
Don't populate const arrays on the stack, instead make them
static.  Makes the object code smaller by over 5200 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  58259	   8880	    128	  67267	  106c3	ov519.o

After:
   text	   data	    bss	    dec	    hex	filename
  52155	   9776	    128	  62059	   f26b	ov519.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04 16:57:01 -03:00