On clock recovery this function is called to find out
the max voltage swing level that we could go.
However gen 9 functions use the old buffer translation tables
to figure that out. That table is not valid for CNL
causing an invalid number of entries and an invalid selection
on the max voltage swing level.
v2: Let's use same approach that previous platforms.
v3: Actually use n_entries and avoid duplicated -1.
v4: Avoid cnl_max_level and use current style.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170831145356.15932-1-rodrigo.vivi@intel.com
Let's get a proper HDMI DDI entry level for vswing programming
sequences on CNL.
Spec doesn't specify any default for HDMI tables,
so let's pick the last entry as the default for now.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-7-rodrigo.vivi@intel.com
No functional changes. But those functions will be needed
to get max level for HDMI and DP, so let's move those
up closer to other similar functions existent for previous
platforms.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-6-rodrigo.vivi@intel.com
Let's start converging CNL buf translations to same style
used on previous platforms. So first thing is to use the
standard signature so we don't need to propagate the voltage
check into other parts of the code, but only on the parts
that it is really useful.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-5-rodrigo.vivi@intel.com
Sequences for DisplayPort asks us to
" Configure voltage swing and related IO settings.
Refer to DDI Buffer section."
before "Configure and enable DDI_BUF_CTL"
On BXT and CNL this means to execute the ddi vswing sequences.
At this point these sequences calls are getting duplicated for DP
because they are all called from DP link trainning sequences.
However this patch is not yet removing it before a futher discussion
since spec also allows that during link training without disabling
anything:
"
Notes
Changing voltage swing during link training:
Change the swing setting following the DDI Buffer section.
The port does not need to be disabled.
"
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-4-rodrigo.vivi@intel.com
Vswing sequences on BXT and CNL are equivalent
to the ddi buffer registers setting on other platforms.
For some reason it got aligned with skl_ddi_set_iboost what
is semantically incorrect. This forced us to keep skipping
ddi buffer translation tables on the platforms that has
the vswing sequences.
v2: Don't mess with DP signal levels on this patch.
Cc: Vandana Kannan <vandana.kannan@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-3-rodrigo.vivi@intel.com
Let's decouple bxt, glk and cnl dp signal levels
from other DDIs to avoid confusion.
No functional change. Only a reorg to avoid messing
with currently working DP signal levels when
moving voltage swing sequences around to match spec.
v2: ddi_signal_levels is also called from other ddi
platforms, so don't remove IS_GEN9_BC check from
skl_ddi_set_iboos. (Ville).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-2-rodrigo.vivi@intel.com
No functional changes. This only moves the DP level
selection to a separated function that will be later
used to organize better the vswing sequences.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-1-rodrigo.vivi@intel.com
Driver’s CPU access to GTT is via the GTTMMADR BAR.
The current HW implementation of that BAR is to only
support <= DW (and maybe QW) writes—not 16/32/64B writes
that could occur with WC and/or SSE/AVX moves.
GTTMMADR must be marked uncacheable (UC).
Accesses to GTTMMADR(GTT), must be 64 bits or less (ie. 1 GTT entry).
v2: Get clarification on the reasons and spec is getting
updated to reflect it now.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Suggested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230907.21363-1-rodrigo.vivi@intel.com
On CNL B0 stepping GAM is not able to detect some deadlock
condition and then rise the rise the gam_coh_flush.
WA database and spec both mentions to set 4AB8[24]=1 as
workaround. Although register offset 0x4AB8 is not
documented for any platform.
References: HSD#1945815, BSID#1112
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230751.21047-1-rodrigo.vivi@intel.com
WA to enable HW L1 Banking fix that allows aniso to operate
at full sample rate.
References: HSD#1937670
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Anuj Phogat <anuj.phogat@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230723.20898-1-rodrigo.vivi@intel.com
No functional changes.
Our code was only a bit messy with mixed style there so
let's clean up a bit using the short codenames for the platforms.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829052026.15038-1-rodrigo.vivi@intel.com
The CCS won't have the same stride as the main surface anyway so trying
to guard against the fence stride not matching the CCS stride is
not sensible. Just skip the fence vs. fb alignment check for the aux
plane.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-3-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb0573 ("drm/i915: Add render decompression support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Userspace wants to treat fb->offsets[] as raw byte offsets into the gem
bo. Adjust the kernel code to match.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-2-ville.syrjala@linux.intel.com
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb0573 ("drm/i915: Add render decompression support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Since we hold the device wakeref when writing through the GTT (otherwise
the writes would fail), we presumed that before the device sleeps those
writes would naturally be flushed and that we wouldn't need our mmio
read trick. However, that presumption seems false and a sleepy bxt seems
to require us to always manually flush the GTT writes prior to direct
access.
Fixes: e2a2aa36a5 ("drm/i915: Check we have an wake device before flushing GTT writes")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829192546.1087-1-chris@chris-wilson.co.uk
When we wake up from suspend, the device has been powered down and
should come back afresh. We should be able to safely remove the wedged
status from the previous session and start afresh.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
When we do a locked idle we know that afterwards all requests have been
completed and the engines have been cleared of tasks. For whatever
reason, this doesn't always happen and we may go into a suspend with
ELSP still full, and this causes an issue upon resume as we get very,
very confused.
If the engines refuse to idle, mark the device as wedged. In the process
we get rid of the maybe unused open-coded version of wait_for_engines
reported by Nick Desaulniers and Matthias Kaehlcke.
v2: Suppress the -EIO before suspend, but keep it for seqno wrap.
References: https://bugs.freedesktop.org/show_bug.cgi?id=101891
References: https://bugs.freedesktop.org/show_bug.cgi?id=102456
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
If we are using the cmdparser, we will have to copy the batch and so
stall for the relocations. Rather than prolong that stall by adding more
relocation requests, just use CPU relocations and do the stall upfront.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826135620.25949-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Sometimes we know we are the only user of the bo, but since we take a
protective pin_pages early on, an attempt to change the vmap on the
object is denied because it is busy. i915_gem_object_pin_map() cannot
tell from our single pin_count if the operation is safe. Instead we must
pass that information down from the caller in the manner of
I915_MAP_OVERRIDE.
This issue has existed from the introduction of the mapping, but was
never noticed as the only place where this conflict might happen is for
cached kernel buffers (such as allocated by i915_gem_batch_pool_get()).
Until recently there was only a single user (the cmdparser) so no
conflicts ever occurred. However, we now use it to allocate batches for
different operations (using MAP_WC on !llc for writes) in addition to the
existing shadow batch (using MAP_WB for reads).
We could either keep both mappings cached, or use a different write
mechanism if we detect a MAP_WB already exists (i.e. clflush
afterwards), but as we haven't seen this issue in the wild (it requires
hitting the GPU reloc path in addition to the cmdparser) for simplicity
just allow the mappings to be recreated.
v2: Include the i915_MAP_OVERRIDE bit in the enum so the compiler knows
about all the valid values.
Fixes: 7dd4f6729f ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_lut_handle # byt, completely by accident
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828104631.8606-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since we use a worker to enable FBC on the CRTC, it is possible for the
CRTC to be switched off before we run. In this case, the CRTC will not
allow us to wait upon a vblank, so remove the DRM_ERROR as this is very
much expected.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102410
Fixes: ca18d51d77 ("drm/i915/fbc: wait for a vblank instead of 50ms when enabling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170825150215.19236-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When FBC is enabled for linear, legacy Y-tiled and Yf-tiled
surfaces on gen9, the cfb stride must be programmed by SW as
cfb_stride = ceiling[(at least plane width in pixels)/
(32 * compression limit factor)] * 8
v2: Minor fix for a build error
v3: Fixed subject, register name and platform check (Ville)
v4: Added WA details in comment (Paulo)
v5:
- Read modified reg write to preserve other bit values (Paulo)
- Store modified stride value in reg_params (Paulo)
- Keep GLK out of the WA (Paulo)
v6:
- added additional field in reg_params for gen9_wa_cfb_stride (Paulo)
- Used appropriate bit mask while writing the register (Paulo)
v7 (from Paulo):
- Fix coding style and spacing issues.
- Mask the old values before writing.
- Bikeshed comments and unnecessary checks.
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502389833-32621-1-git-send-email-praveen.paneri@intel.com
Apparently meant to be additional DEVICE_PORT_* or DVO_PORT_* macros,
but left unused at some point. Remove. No functional changes.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/76a1b91bfe05e9e1c04d921b9c4364461f754905.1503600621.git.jani.nikula@intel.com
No idea why some definitions were defined at a different place from the
rest. Move them together. No functional changes.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6433a24240ef965f9c032e8f66fcce0ea33277ef.1503600621.git.jani.nikula@intel.com
The old_child_dev_config struct is no longer needed except for its size;
replace with a macro. No functional change.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4bfa6e45fecd33af797ec218635504ec8a09f788.1503600621.git.jani.nikula@intel.com
All the child device config fields, including legacy, are now available
in the same struct, so use it for everything.
As this change touches plenty of code with "p_child", rename them to
"child" while at it. Also do some simple unification and constification
where not intrusive. This in the name of avoiding extra cleanup churn
for the same lines as here.
No functional changes.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/103300a9ae8629624619fc8df2c533e745cc5a78.1503600621.git.jani.nikula@intel.com
Add legacy contents to common child device config, in preparation for
using a single child device config. Use unions where BDB versions of the
config differ. Use the naming from old_child_dev_config for legacy
fields.
No functional changes.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b606456da4d52f1aedf383aab4275d81013d3178.1503600621.git.jani.nikula@intel.com
Document everything that was introduced after version 155, which seems
to be the baseline for some of the later documentation. No functional
changes.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/11e8200e750eea13604b2d21e56b37cd5e6d9ab0.1503600621.git.jani.nikula@intel.com
Add both some new and some old fields to child device config
parameters. Prepare for switching to just one child device config. Use
naming from struct old_child_dev_config for common fields.
No functional changes.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bbf66c934eb5c655fd7dda6c1bb8f218c8edc209.1503600621.git.jani.nikula@intel.com
Oneshot disabling of IPS when CRC capturing is started is insufficient.
IPS may get re-enabled by any plane update, and hence tests that keep
CRC capturing on across plane updates will start to see inconsistent
results as soon as IPS kicks back in. Add a new knob into the crtc state
to make sure IPS stays disabled as long as CRC capturing is enabled.
Forcing a modeset is the easiest way to handle this since that's already
how we do the panel fitter workaround. It's a little heavy handed just
for IPS, but seeing as we might already do the panel fitter workaround
I think it's better to follow that. We migth want to optimize both cases
later if someone gets too upset by the extra delay from the modeset.
v2: Check the right thing when deciding whether to force a modeset
v3: Rebase, check HAS_IPS before forcing a modeset,
move ips_force_disable check into pipe_config_supports_ips()
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101664
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Marta Lofsted <marta.lofstedt@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817145509.15549-1-ville.syrjala@linux.intel.com
By using drm_gem_flink/drm_gem_open on an object using the same fd, it
is possible for a client to create multiple handles pointing to the same
object (tied to the same contexts and VMA), as exemplified by
igt::gem_handle_to_libdrm_bo(). Since this duplication has been possible
since forever, we cannot assume that the handle:(fpriv, object) is
unique and so must handle the multiple users of a single VMA.
v2: Added commentary noise.
Testcase: igt/gem_close
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102355
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822110517.22277-3-chris@chris-wilson.co.uk
Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Make sure that we are not leaking an entry in the ctx->handles_lut by
asserting that the object was removed prior to being freed. This should
be enforced by all such handles being removed by i915_gem_close_object.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822110517.22277-2-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
During the context-close, we should be decoupling all the vma from the
object so that upon object-closing we shouldn't see any vma from the
already closed contexts. So include a check upon closing the object that
the context is still open.
v2: Eek, the fpriv check is required for shared objects. Double eek, BAT
passed?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822110517.22277-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
To avoid a potential hang condition with TLB invalidation
we need to enable masked bit 5 of MMIO 0xE5F0 at boot.
Same workaround was in place for previous platforms,
but the register offset has changed for CNL.
But also BSpec doesn't mention the bit 15 as set on gen9
platforms and mark bit as reserved on CNL.
v2: Improve commit message accepting Oscar's suggestion.
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823203504.10012-1-rodrigo.vivi@intel.com
CS sometimes hangs on 3D Push Constant dispatches with the new
deref enhancement logic in CNL.
v2: Improve the commit message (Rodrigo)
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1503518191-19116-1-git-send-email-oscar.mateo@intel.com
We use WC pages for coherent writes into the ppGTT on !llc
architectures. However, to create a WC page requires a stop_machine(),
i.e. is very slow. To compensate we currently keep a per-vm cache of
recently freed pages, but we still see the slow startup of new contexts.
We can amoritize that cost slightly by allocating WC pages in small
batches (PAGEVEC_SIZE == 14) and since creating a WC page implies a
stop_machine() there is no penalty for keeping that stash global.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822173828.5932-1-chris@chris-wilson.co.uk
Coffee Lake CPU on Kaby Lake PCH is possible.
It does exist, and it does work.
The only missed case was this warning here noticed
by Wendy who could get one system with this configuration
and reported the issue for us:
Hardware Configuration
Board ID KBL S DDR4 UDIMM EV CRB
Processor Intel® Processor code named Coffee Lake S, (6+2), 6 cores 12 threads, GT2, A0 (Internal) (QNJ4)
[ 3.220585] WARNING: CPU: 10 PID: 206 at drivers/gpu/drm/i915/i915_drv.c:340 i915_driver_load+0x1210/0x1660 [i915]
[ 3.221312] Modules linked in: hid_generic usbhid i915 i2c_algo_bit drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt nvme fb_sys_fops ptp ahci i2c_hid drm pps_core nvme_core libahci wmi hid video
[ 3.222050] CPU: 10 PID: 206 Comm: systemd-udevd Not tainted 4.13.0-rc5-intel-next+ #1
[ 3.222706] Hardware name: Intel Corporation Kabylake Client platform/KBL S DDR4 UDIMM EV CRB, BIOS KBLSE2R1.R00.X089.P00.1705051000 05/05/2017
Cc: Wendy Wang <wendy.wang@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170821235056.9015-1-rodrigo.vivi@intel.com
Move the part that reads the table and sets registers based on the
table to its own function.
v2: Rebase.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822000356.17330-2-rodrigo.vivi@intel.com
Make it a little less magical and a little simpler and more hardcoded
so we don't end up with an array that's composed mostly of empty
entries.
v2: Add an enum for the voltage+register values (Ville).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822000356.17330-1-rodrigo.vivi@intel.com
