The default mode for SSP configuration is TDM 4 slot and so far we were
using this for the bus format on cht-bsw-rt56732 boards.
One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2.
The second piggy-backed, output-only codec is inside the keyboard-dock
(which has extra speakers). Unlike the main rt5672 codec, we cannot
configure this codec, it is hard coded to use 2 channel 24 bit I2S.
Using 4 channel TDM leads to the dock speakers codec (which listens in on
the data send from the SSP to the rt5672 codec) emiting horribly distorted
sound.
Since we only support 2 channels anyways, there is no need for TDM on any
cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere.
This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing
the bus format set in cht_codec_fixup() to I2S 2 channel.
This change has been tested on the following devices with a rt5672 codec:
Lenovo Miix 2 10
Lenovo Thinkpad 8
Lenovo Thinkpad 10 (gen 1)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Link: https://lore.kernel.org/r/20200628155231.71089-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have two configurations for CometLake, and a third one
coming. On other platforms, we used a single Kconfig option, so we
should follow the same trend by merging the two cases in a backwards
compatible way.
The backwards compatibility is handled by overloading the COMETLAKE_LP
kconfig as COMETLAKE. In practice we've never seen a case where
COMETLAKE_H is not selected along with COMETLAKE_LP, so keeping one
of the two is enough.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164755.18104-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've had a couple of changes that introduce regressions with the
multi-cpu DAI solutions, and while trying to fix them we found
additional inconsistencies that should also go to stable branches.
Bard Liao (1):
ASoC: core: only convert non DPCM link to DPCM link
Pierre-Louis Bossart (3):
ASoC: soc-pcm: dpcm: fix playback/capture checks
ASoC: Intel: boards: replace capture_only by dpcm_capture
ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags
sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +-
sound/soc/intel/boards/kbl_da7219_max98927.c | 4 +-
sound/soc/intel/boards/kbl_rt5663_max98927.c | 2 +-
.../intel/boards/kbl_rt5663_rt5514_max98927.c | 2 +-
sound/soc/soc-core.c | 22 ++++++++--
sound/soc/soc-pcm.c | 44 ++++++++++++++-----
sound/soc/sof/nocodec.c | 6 ++-
7 files changed, 62 insertions(+), 20 deletions(-)
base-commit: 8a9144c1cf
--
2.20.1
The Toshiba Encore WT10-A tablet almost fully works with the default
settings for Bay Trail CR devices. The only issue is that it uses a
digital mic. connected the the DMIC1 input instead of an analog mic.
Add a quirk for this model using the default settings with the input-map
replaced with BYT_RT5640_DMIC1_MAP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200608204634.93407-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's not clear why specific FE dailinks use capture_only flags, likely
blind copy/paste from Chromebook driver to the other. Replace by
dpcm_capture, this will make future alignment and removal of flags
easier.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608194415.4663-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As CONFIG_SND_HDA_CODEC_HDMI is always enabled in sof_pcm512x,
let's remove the test of CONFIG_SND_HDA_CODEC_HDMI in the
sof_pcm512x driver.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200529193547.6077-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC is always enabled in sof-soundwire
driver, let's remove the test of CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC
in the code.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200529193547.6077-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the driver uses common hdmi, SND_SOC_SOF_HDA_AUDIO_CODEC is required
to be enabled. Otherwise, the legacy hda codec driver will not be used.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200529193547.6077-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the
driver, we can easily get a build failure when I2C is built-in
but soundwire is not:
WARNING: unmet direct dependencies detected for SND_SOC_RT5682
Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y])
Selected by [y]:
- SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y]
Selected by [m]:
- SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y])
Rework the driver to have three separate modules, with the
main driver just dealing with the common bits and the actual
initialization as part of i2c and sdw specific modules.
The conversion is fairly mechanical to keep it easy to review,
i.e. it moves code around with the minimal required renaming
and changes.
Fixes: 6b8e4e7db3 ("ASoC: amd: Add machine driver for Raven based platform")
Fixes: fd443a20c2 ("ASoC: rt5682: fix I2C/Soundwire dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200528091851.2889754-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add required .pm_ops to support suspend/resume on baytrail/cherrytrail
machines.
This .pm_ops is conditionally-added to avoid impacting the legacy
driver where power management is handled differently.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Low-power playback was never enabled on Baytrail devices, remove what
looks like copy/paste from other machine drivers which were never
submitted upstream.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Toshiba Encore WT8-A tablet almost fully works with the default
settings for non-CR Bay Trail devices. The only problem is that its
jack-detect switch is not inverted (it is active high instead of
the normal active low).
Add a quirk for this model using the default settings +
BYT_RT5640_JD_NOT_INV.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200518072416.5348-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have snd_soc_dai/dai_stream/component_active() macro
This patch uses it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv0i58it.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use same mapping as in all other machine drivers:
BTN_0 : KEY_PLAYPAUSE
BTN_1 : KEY_VOICECOMMAND
BTN_2 : KEY_VOLUMEUP
BTN_3 : KEY_VOLUMEDOWN
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200515210731.10942-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use same mapping as in all other machine drivers:
BTN_0 : KEY_PLAYPAUSE
BTN_1 : KEY_VOICECOMMAND
BTN_2 : KEY_VOLUMEUP
BTN_3 : KEY_VOLUMEDOWN
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200515210731.10942-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use same mapping as in all other machine drivers:
BTN_0 : KEY_PLAYPAUSE
BTN_1 : KEY_VOICECOMMAND
BTN_2 : KEY_VOLUMEUP
BTN_3 : KEY_VOLUMEDOWN
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200515210731.10942-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The component string attributes are separated by spaces, not commas.
Fixes: b1ca2f63e2 ("ASoC: Intel: sof_sdw: add amp number in components string for ucm")
Reported-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200515210731.10942-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove obsolete reference to Broxton since the machine driver will be
reused on other platforms, e.g. Up Extreme.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200515210731.10942-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With 'ASoC: Intel: Skylake: Fix HDaudio and Dmic' series applied,
warning is no longer true. Remove it and update the description.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200506212114.8502-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200511174647.GA17318@embeddedor
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to fix issue described in:
"ASoC: Intel: sst: ipc command timeout"
https://patchwork.kernel.org/patch/11482829/
use readq function, which is meant to read 64 bit values from registers.
On 32 bit platforms it falls back to two readl calls.
Reported-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Brent Lu <brent.lu@intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200507133405.32251-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Baytrail has 64 bit registers, so we should use *read64* to read from it
and then use proper mask values to check status.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Brent Lu <brent.lu@intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200507133405.32251-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the ambiguity with GPL-2.0 and use an explicit GPL-2.0-only
tag.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200501145850.15178-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new machine driver to interface with WM8804. The code is based
on settings found in sound/soc/bcm/hifiberry-digi.c in the Raspberry
PI tree.
Tested on Up2 with Digi+ IO (capture+playback) and Digi+ PRO (playback
with two local oscillators supported). The codec is clock master in
both cases.
Capture support has known clocking restrictions: the transmitter needs
to be active for the clock recovery, the "Tx Source" mixer set to
"S/PDIF RX". Playback will only work while capture is active.
When Capture is not desired, or when there is no RX connector, the "Tx
Source" mixer should be set to "AIF"
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200501151625.17820-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing the SOF module, the RT286 jack detect
handler will oops if jack detection is not disabled.
Disable the jack in the machine driver remove callback
to prevent this. This fix is only for SOF support and is
not needed for earlier versions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427162953.21107-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series provides the following updtes to the Intel machine driver
Kconfig:
1. The first patch adds the explicit dependency on GPIOLIB when
SND_SOC_DMIC is selected.
2. SND_SOC_SOF_HDA_AUDIO_CODEC is required for using the legacy
HDA codec driver for HDMI support in SOF. The last 3 three patches
make the required changes to account for this.
Libin Yang (3):
ASoC: intel: add depends on SND_SOC_SOF_HDA_AUDIO_CODEC for common
hdmi
ASoC: sof-sdw: remove CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC condition
ASoC: sof_pcm512x: remove CONFIG_SND_HDA_CODEC_HDMI condition
Pierre-Louis Bossart (1):
ASoC: Intel: boards: add explicit dependency on GPIOLIB when DMIC is
used
sound/soc/intel/boards/Kconfig | 51 ++++++++++++++-------------
sound/soc/intel/boards/sof_pcm512x.c | 9 -----
sound/soc/intel/boards/sof_sdw.c | 8 -----
sound/soc/intel/boards/sof_sdw_hdmi.c | 7 ----
4 files changed, 26 insertions(+), 49 deletions(-)
--
2.17.1
BDW boards using this machine driver supports only stereo capture and
playback. Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-4-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BDW boards using this machine driver supports only 2 or 4-channel capture.
Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-3-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BDW boards using this machine driver supports only stereo capture and
playback. Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-2-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_DMIC depends on GPIOLIB, so let's add the dependency before
selecting SND_SOC_DMIC.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427165211.23463-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Automatically choose DMIC pipeline format configuration depending on
information included in NHLT.
Change the access rights of appropriate kcontrols to read-only in order
to prevent user interference.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-4-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For pipes supporting multiple input/output formats, kcontrol is
created and selection of pipe input and output configuration
is done based on control set.
If more than one configuration is supported, then this patch
allows user to select configuration of choice
using amixer settings.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Signed-off-by: Pavan K S <pavan.k.s@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-3-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add alternative topology binary file name based on used machine driver
and fallback to use this name after failed attempt to load topology file
with name based on NHLT.
This change addresses multiple issues with current mechanism, for
example - there are devices without NHLT table, and that currently
results in tplg_name being empty.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-2-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The number of speaker amplifiers may vary between platforms. UCM
needs to check amp number to include different configuration files.
This patch keeps track of the number of speaker amplifiers and
stores it in components string of the card.
Tested on Comet Lake platforms.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200419183509.4134-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl6fYTwTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoXKqEACrHTSOY6ul9mCyjdcJnfLVOoU4iV76
OTC8u+3mGhwglU7SnSyJAFXHGVGkJL6VUptkpO6rA0qURisFh3L5ZoozioR1SHYW
yGvjGVW8tjvgBv9hXunWGfz0soTr+gB8V+WB5Wlw47Oifmu0oeB0BG0Nb68hfJL3
u2cUc+2FUZTnP9cangD0gaPF9zybjpxGZH74KCN7AVs/nWBZqnGA+Rw0EE5kEAeP
a4fd1KHQpmfFoOIv2HKqjQTpa3F+7R6AUpuvm0D+ipFNxV2b4Ka4lbKgbMbMiuUb
l3sFo017gV5DF1aUl/0Zz7YGDf8mOZnABuGuItLwo5/PQFO7mftFodBQuxjofkX1
DdRyzt3HNT0RCzu8CC2ZLi6e5ukSLJK9khR7kCcAL8eNHScvRGz5RO+h3s/1gmk9
+grVPIwDIZLqmm7a6Cgld8GBPfWmPYlDUcoUR751Wn2bxnwwk2lcWrA50txkznbl
yWokE9OHQ4EHtKJarpbN7mvW2SgGnyLkOESWLCk8J8bqSF0mKfIcK2SAUdWR1JHI
J3hp8oBgVgZHtoh5ZroENk/KVTiZK56+ECcMdfO7/m+jBV66bsxi1Cs7aKSSF9rI
3IZYg9BC3Y8uk8Z6u695R86HcVIN7eSANmTkWHldphfQDN3Vn9LFGkXTD1zdZliR
irt3V2BdadMIJg==
=XTzg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6f95oTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GkGB/0X/amUL/B6lXjZky3rjkLP9uewLZls
Q0NsGdhkpX/2ixnaWMJO3eRj1RFT59JEKmU91nBmwh93i+CJ6UzDrGOU7LURu6e/
tRG4KWiqDaHNsKTHUE8wBSfEAeny9FlxQcWmtngb1hQCfcprqheMLQRGB8pXNz3C
Cg28+FcEjXENFeNRxxVe5+Ld8odO7YhSnNj4NjwrVrpVuAfjtU9RumqOA0gZRj+i
vhg8C83mlmBZO1RmKmtHOaCqGVoNUz2wW6+lxyC6DO+v4SxgGP0pcrbrBG1m61Bg
gFmXV9SlWgQUf7khOp1EDW4TQ023zz0evXAxVlKtQeBwRn+aOYDenYy7
=Aeww
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7
ASoC: tegra: Fixes for v5.7-rc3
This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.
Recent fix for jack detection caused a regression on systems with HDA
audio codec but no HDMI/DP audio via i915 graphics, leading to a kernel
oops at device probe. On these systems, HDA bus instance lookup fails,
as the first ASoC runtime of the card is connected to a dummy codec
(as no HDMI codec is present).
Fixes: 3a24f135e6 ("ASoC: intel/skl/hda - set autosuspend timeout for hda codecs")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200420205431.13070-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vWe can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnc2vdka.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update D0 <-> D3 sequence to correctly transition hardware and DSP core
from and to D3. On top of that, set SHIM registers to their recommended
defaults during D0 and D3 proceduces as HW does not reset registers for
us.
Connected to:
[alsa-devel][BUG] bdw-rt5650 DSP boot timeout
https://mailman.alsa-project.org/pipermail/alsa-devel/2019-July/153098.html
Github issue ticket reference:
https://github.com/thesofproject/linux/pull/1842
Tested on:
- BDW-Y RVP with rt286
- SAMUS with rt5677
Proposed solution (both in July 2019 and on github):
'Revert "ASoC: Intel: Work around to fix HW d3 potential crash issue"'
is NAKed as it only covers the problem up and actually brings back the
undefined behavior: some registers (e.g.: APLLSE) are describing LPT
offsets rather than WPT ones. In consequence, during power-transitions
driver issues incorrect writes and leaves the regs of interest alone.
Existing patch - the non-revert - does not resolve the HW D3 issue at
all as it ignores the recommended sequence and does not initialize
hardware registers as expected. And thus, leaving things as are is also
unacceptable.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Ross Zwisler <zwisler@google.com>
Link: https://lore.kernel.org/r/20200330194520.13253-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/intel/common/soc-acpi-intel-cml-match.c:116:45: warning:
‘rt1308_2_adr’ defined but not used [-Wunused-const-variable=]
static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
^~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200410081117.21319-2-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/intel/common/soc-acpi-intel-icl-match.c:90:45: warning:
‘rt1308_2_adr’ defined but not used [-Wunused-const-variable=]
static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
^~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200410081117.21319-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
