<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1). This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.
Most files that include this header don't actually need it. So in
preparation for removing it, remove all these unneeded includes of it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These drivers no longer need it as they are only probed via DT.
crypto_platform_data was allocated but unused, so remove it.
This is a follow up for:
commit 45a536e3a7 ("crypto: atmel-tdes - Retire dma_request_slave_channel_compat()")
commit db28512f48 ("crypto: atmel-sha - Retire dma_request_slave_channel_compat()")
commit 62f72cbdcf ("crypto: atmel-aes - Retire dma_request_slave_channel_compat()")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_* flags were apparently meant as a way to make the
->setkey() functions provide more information about errors. But these
flags weren't actually being used or tested, and in many cases they
weren't being set correctly anyway. So they've now been removed.
Also, if someone ever actually needs to start better distinguishing
->setkey() errors (which is somewhat unlikely, as this has been unneeded
for a long time), we'd be much better off just defining different return
values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove CRYPTO_TFM_RES_MASK and all the unneeded logic that
propagates these flags around.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HMAC keys can be of any length, and atmel_sha_hmac_key_set() can only
fail due to -ENOMEM. But atmel_sha_hmac_setkey() incorrectly treated
any error as a "bad key length" error. Fix it to correctly propagate
the -ENOMEM error code and not set any tfm result flags.
Fixes: 81d8750b2b ("crypto: atmel-sha - add support to hmac(shaX)")
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even when deferring, we would like to know what caused it.
Update dev_warn to dev_err because if the DMA init fails,
the probe is stopped.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'direction' member of the dma_slave_config will be going away
as it duplicates the direction given in the prepare call.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
device_terminate_all() is used to abort all the pending and
ongoing transfers on the channel, it should be used just in the
error path.
Also, dmaengine_terminate_all() is deprecated and one should use
dmaengine_terminate_async() or dmaengine_terminate_sync(). The method
is not used in atomic context, use dmaengine_terminate_sync().
A secondary aspect of this patch is that it luckily avoids a deadlock
between atmel_aes and at_hdmac.c. While in tasklet with the lock held,
the dma controller invokes the client callback (dmaengine_terminate_all),
which tries to get the same lock. The at_hdmac fix would be to drop the
lock before invoking the client callback, a fix on at_hdmac will follow.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move common alg type init to dedicated methods.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
No error handling, change return type to void.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'err' member was initialized to 0 but its value never changed.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Choose label names which say what the goto does and not from where
the goto was issued. This avoids adding superfluous labels like
"err_aes_buff".
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case the probe fails, the device/driver core takes care of printing
the driver name, device name and error code. Drop superfluous error message
at probe.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
atmel_{sha,tdes}_hw_version_init() calls atmel_{sha,tdes}_hw_init(),
which may fail. Check the return code of atmel_{sha,tdes}_hw_init()
and propagate the error if needed.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increase the algorithm priorities so the hardware acceleration is now
preferred to the software computation: the generic drivers use 100
as priority.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver no longer boots in legacy mode, only via DT. This makes the
dma_request_slave_channel_compat() redundant.
If ever the filter function would be executed it will return false as the
dma_slave is not really initialized.
Switch to use dma_request_chan() which would allow legacy boot if ever
needed again by configuring dma_slave_map for the DMA driver.
At the same time skip allocating memory for dma_slave as it is not used
anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it is if CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is set to m it is in
effect disabled. This patch fixes it by using IS_ENABLED instead
of ifdef.
Fixes: 89a82ef87e ("crypto: atmel-authenc - add support to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some crypto API users allocating a tfm with crypto_alloc_$FOO() are also
specifying the type flags for $FOO, e.g. crypto_alloc_shash() with
CRYPTO_ALG_TYPE_SHASH. But, that's redundant since the crypto API will
override any specified type flag/mask with the correct ones.
So, remove the unneeded flags.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Omit extra messages for a memory allocation failure in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
irq would be set to -1 and then unused, if we failed to get IORESOURCE_MEM.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove unnecessary static on local variable sha_dd. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.
This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci
In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:
before:
text data bss dec hex filename
30005 10264 128 40397 9dcd drivers/crypto/atmel-sha.o
after:
text data bss dec hex filename
29934 10208 64 40206 9d0e drivers/crypto/atmel-sha.o
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Atmel SHA driver was treating -EBUSY as indication of queueing
to backlog without checking that backlog is enabled for the request.
Fix it by checking request flags.
Cc: <stable@vger.kernel.org>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch clarifies and fixes how errors should be handled by
atmel_sha_start().
For update operations, the previous code wrongly assumed that
(err != -EINPROGRESS) implies (err == 0). It's wrong because that doesn't
take the error cases (err < 0) into account.
This patch also adds many comments to detail all the possible returned
values and what should be done in each case.
Especially, when an error occurs, since atmel_sha_complete() has already
been called, hence releasing the hardware, atmel_sha_start() must not call
atmel_sha_finish_req() later otherwise atmel_sha_complete() would be
called a second time.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a previous patch: "crypto: atmel-sha - update request
queue management to make it more generic".
Indeed the patch above should have replaced the "return -EINVAL;" lines by
"return atmel_sha_complete(dd, -EINVAL);" but instead replaced them by a
simple call of "atmel_sha_complete(dd, -EINVAL);".
Hence all "return" instructions were missing.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When we enable COMPILE_TEST building for the Atmel sha and tdes implementations,
we run into a couple of warnings about incorrect format strings, e.g.
In file included from include/linux/platform_device.h:14:0,
from drivers/crypto/atmel-sha.c:24:
drivers/crypto/atmel-sha.c: In function 'atmel_sha_xmit_cpu':
drivers/crypto/atmel-sha.c:571:19: error: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Werror=format=]
In file included from include/linux/printk.h:6:0,
from include/linux/kernel.h:13,
from drivers/crypto/atmel-tdes.c:17:
drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_crypt_dma_stop':
include/linux/kern_levels.h:4:18: error: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'size_t {aka long unsigned int}' [-Werror=format=]
These are all fixed by using the "%z" modifier for size_t data.
There are also a few uses of min()/max() with incompatible types:
drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_crypt_start':
drivers/crypto/atmel-tdes.c:528:181: error: comparison of distinct pointer types lacks a cast [-Werror]
Where possible, we should use consistent types here, otherwise we can use
min_t()/max_t() to get well-defined behavior without a warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When VERBOSE_DEBUG is defined and SHA_FLAGS_DUMP_REG flag is set in
dd->flags, this patch prints the register names and values when performing
IO accesses.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patchs allows to combine the AES and SHA hardware accelerators on
some Atmel SoCs. Doing so, AES blocks are only written to/read from the
AES hardware. Those blocks are also transferred from the AES to the SHA
accelerator internally, without additionnal accesses to the system busses.
Hence, the AES and SHA accelerators work in parallel to process all the
data blocks, instead of serializing the process by (de)crypting those
blocks first then authenticating them after like the generic
crypto/authenc.c driver does.
Of course, both the AES and SHA hardware accelerators need to be available
before we can start to process the data blocks. Hence we use their crypto
request queue to synchronize both drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support to the hmac(shaX) algorithms.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a simple function to perform data transfer with the DMA
controller.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a simple function to perform data transfer with PIO, hence
handled by the CPU.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch simply defines a helper function to test the 'Data Ready' flag
of the Status Register. It also gives a chance for the crypto request to
be processed synchronously if this 'Data Ready' flag is already set when
polling the Status Register. Indeed, running synchronously avoid the
latency of the 'Data Ready' interrupt.
When the 'Data Ready' flag has not been set yet, we enable the associated
interrupt and resume processing the crypto request asynchronously from the
'done' task just as before.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch modifies the SHA_FLAGS_SHA* flags: those algo flags are now
organized as values of a single bitfield instead of individual bits.
This allows to reduce the number of bits needed to encode all possible
values. Also the new values match the SHA_MR_ALGO_SHA* values hence
the algorithm bitfield of the SHA_MR register could simply be set with:
mr = (mr & ~SHA_FLAGS_ALGO_MASK) | (ctx->flags & SHA_FLAGS_ALGO_MASK)
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch is a transitional patch. It updates atmel_sha_done_task() to
make it more generic. Indeed, it adds a new .resume() member in the
atmel_sha_dev structure. This hook is called from atmel_sha_done_task()
to resume processing an asynchronous request.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch is a transitional patch. It splits the atmel_sha_handle_queue()
function. Now atmel_sha_handle_queue() only manages the request queue and
calls a new .start() hook from the atmel_sha_ctx structure.
This hook allows to implement different kind of requests still handled by
a single queue.
Also when the req parameter of atmel_sha_handle_queue() refers to the very
same request as the one returned by crypto_dequeue_request(), the queue
management now gives a chance to this crypto request to be handled
synchronously, hence reducing latencies. The .start() hook returns 0 if
the crypto request was handled synchronously and -EINPROGRESS if the
crypto request still need to be handled asynchronously.
Besides, the new .is_async member of the atmel_sha_dev structure helps
tagging this asynchronous state. Indeed, the req->base.complete() callback
should not be called if the crypto request is handled synchronously.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a transitional patch: it creates the atmel_sha_find_dev() function,
which will be used in further patches to share the source code responsible
for finding a Atmel SHA device.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.6:
API:
- Convert remaining crypto_hash users to shash or ahash, also convert
blkcipher/ablkcipher users to skcipher.
- Remove crypto_hash interface.
- Remove crypto_pcomp interface.
- Add crypto engine for async cipher drivers.
- Add akcipher documentation.
- Add skcipher documentation.
Algorithms:
- Rename crypto/crc32 to avoid name clash with lib/crc32.
- Fix bug in keywrap where we zero the wrong pointer.
Drivers:
- Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
- Add PIC32 hwrng driver.
- Support BCM6368 in bcm63xx hwrng driver.
- Pack structs for 32-bit compat users in qat.
- Use crypto engine in omap-aes.
- Add support for sama5d2x SoCs in atmel-sha.
- Make atmel-sha available again.
- Make sahara hashing available again.
- Make ccp hashing available again.
- Make sha1-mb available again.
- Add support for multiple devices in ccp.
- Improve DMA performance in caam.
- Add hashing support to rockchip"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: qat - remove redundant arbiter configuration
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: qat - Change the definition of icp_qat_uof_regtype
hwrng: exynos - use __maybe_unused to hide pm functions
crypto: ccp - Add abstraction for device-specific calls
crypto: ccp - CCP versioning support
crypto: ccp - Support for multiple CCPs
crypto: ccp - Remove check for x86 family and model
crypto: ccp - memset request context to zero during import
lib/mpi: use "static inline" instead of "extern inline"
lib/mpi: avoid assembler warning
hwrng: bcm63xx - fix non device tree compatibility
crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
crypto: qat - The AE id should be less than the maximal AE number
lib/mpi: Endianness fix
crypto: rockchip - add hash support for crypto engine in rk3288
crypto: xts - fix compile errors
crypto: doc - add skcipher API documentation
crypto: doc - update AEAD AD handling
...
The change fixes potential oops while accessing iomem on invalid
address, if devm_ioremap_resource() fails due to some reason.
The devm_ioremap_resource() function returns ERR_PTR() and never
returns NULL, which makes useless a following check for NULL.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixes: b0e8b3417a ("crypto: atmel - use devm_xxx() managed function")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When (!ctx->bufcnt && !(ctx->flags & SHA_FLAGS_PAD)), the former source
code used to set the SHA_FLAGS_BUSY without checking whether this flag was
already set. If so, the hardware is already processing another hash
request so the processing of the req argument of atmel_sha_final() should
be delayed by queueing this request, the same way as done for the
(ctx->bufcnt != 0) case.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using only the digest, digcnt[], bufcnt and buffer[] fields of the
struct atmel_sha_reqctx was not enough to import/export the request state,
so now we use the whole structure.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
clk_prepare()/clk_unprepare() must not be called within atomic context.
This patch calls clk_prepare() once for all from atmel_sha_probe() and
clk_unprepare() from atmel_sha_remove().
Then calls of clk_prepare_enable()/clk_disable_unprepare() were replaced
by calls of clk_enable()/clk_disable().
Cc: stable@vger.kernel.org
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Reported-by: Matthias Mayr <matthias.mayr@student.kit.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch implements the missing .import() and .export() mandatory
hooks for asynchronous hash algorithms. It also sets the relevant, non
zero, value for the .statesize field when declaring the supported SHA
algorithms. Indeed a zero value of .statesize prevents the algorithm from
being registered.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch saves the value of the internal hash register at the end of an
'update' operation then restores this value before starting the next
'update'. This way the driver can now properly handle context switches.
WARNING: only hardware versions from sama5d4x and later provide the
needed interface to update the internal hash value. Especially, sama5d3x
cannot implement this feature so context switches are still broken.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support of hardware version 5.1.x embedded inside sama5d2x
SoCs.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'done' tasklet handler used to check the 'BUSY' flag to either
finalize the processing of a crypto request which had just completed or
manage the crypto queue to start the next crypto request.
On request R1 completion, the driver calls atmel_sha_finish_req(), which:
1 - clears the 'BUSY' flag since the hardware is no longer used and is
ready again to process new crypto requests.
2 - notifies the above layer (the client) about the completion of the
asynchronous crypto request R1 by calling its base.complete()
callback.
3 - schedules the 'done' task to check the crypto queue and start to
process the next crypto request (the 'BUSY' flag is supposed to be
cleared at that moment) if such a pending request exists.
However step 2 might wake the client up so it can now ask our driver to
process a new crypto request R2. This request is enqueued by calling the
atmel_sha_handle_queue() function, which sets the 'BUSY' flags then
starts to process R2.
If the 'done' tasklet, scheduled by step 3, runs just after, it would see
that the 'BUSY' flag is set then understand that R2 has just completed,
which is wrong!
So the state of 'BUSY' flag is not a proper way to detect and handle
crypto request completion.
This patch fixes this race condition by using two different tasklets, one
to handle the crypto request completion events, the other to manage the
crypto queue if needed.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a crash which occured during the computation of the
digest of an empty message.
Indeed, when processing an empty message, the atmel_sha_handle_queue()
function was never called, hence the dd->req pointer remained
uninitialized.
Later, when the atmel_sha_final_req() function was called, it used
to crash while using this uninitialized dd->req pointer.
Hence this patch adds missing initializations of dd->req before calls of
the atmel_sha_final_req() function.
This bug prevented us from passing the tcrypt test suite on SHA algo.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
