In the dt-bindings, "atu" reg-names is required to get the register space
for iATU in Synopsys DWC version 4.80 or later.
Link: https://lore.kernel.org/r/1601444167-11316-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
The ARM MHU's reference manual states following:
"The MHU drives the signal using a 32-bit register, with all 32 bits
logically ORed together. The MHU provides a set of registers to enable
software to set, clear, and check the status of each of the bits of this
register independently. The use of 32 bits for each interrupt line
enables software to provide more information about the source of the
interrupt. For example, each bit of the register can be associated with
a type of event that can contribute to raising the interrupt."
This patch thus extends the MHU controller's DT binding to add support
for doorbell mode.
Though the same MHU hardware controller is used in the two modes, A new
compatible string is added here to represent the combination of the MHU
hardware and the firmware sitting on the other side (which expects each
bit to represent a different signal now).
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
no conflicts at all. This pull includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+ErNYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y284H/3bv9fahbg16AJcKYqJXFHGpDs3CsASPnJqQ
9HQoV5tg6Qd4kI3oFb+30l8SK73Wr2t685/DhOPDRR/vN3B5M1vOQvPRL/dEqiwi
aUEhtMbnC/trSbteXsjGDWT+1EnI/+R3NFV++WiRp1XxE4DRXL3xySTeviR0IW+V
rQxU7VCcVp0bklVH+gqjrsvqU5iZeckyZB6evc8X92ThhzjNprR5KVxxgl1wxcu/
dPYizHoKYVoLVNw50rwPGt2hmq9RpyDM6Xh9UhLHcA57ENyzr8NNTJBOT0tVMTWV
smU01X/ECoy54kj1w8AKP+f7F0G7DUU+Jz68X0X/kYPq520dUs4=
=Ovox
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for <mstarovoitov@marvell.com>
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-10-12
The main changes are:
1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong.
2) libbpf relocation support for different size load/store, from Andrii.
3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel.
4) BPF support for per-cpu variables, form Hao.
5) sockmap improvements, from John.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Preliminary RISC-V enablement - the bulk of it will arrive via the RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config table
rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot#### variable
contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we can
identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available but
returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZNI8
-----END PGP SIGNATURE-----
Merge tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI changes from Ingo Molnar:
- Preliminary RISC-V enablement - the bulk of it will arrive via the
RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config
table rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot####
variable contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
can identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available
but returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
efi: mokvar: add missing include of asm/early_ioremap.h
efi: efivars: limit availability to X86 builds
efi: remove some false dependencies on CONFIG_EFI_VARS
efi: gsmi: fix false dependency on CONFIG_EFI_VARS
efi: efivars: un-export efivars_sysfs_init()
efi: pstore: move workqueue handling out of efivars
efi: pstore: disentangle from deprecated efivars module
efi: mokvar-table: fix some issues in new code
efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
efivarfs: Replace invalid slashes with exclamation marks in dentries.
efi: Delete deprecated parameter comments
efi/libstub: Fix missing-prototypes in string.c
efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
cper,edac,efi: Memory Error Record: bank group/address and chip id
edac,ghes,cper: Add Row Extension to Memory Error Record
efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
efi/libstub: Add efi_warn and *_once logging helpers
integrity: Load certs from the EFI MOK config table
integrity: Move import of MokListRT certs to a separate routine
efi: Support for MOK variable config table
...
- Add deadlock detection for recursive read-locks. The rationale is outlined
in:
224ec489d3: ("lockdep/Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used to
switch between two copies of protected data. This allows the read path,
typically NMIs, to safely interrupt the write side critical section.
We utilize this new variant for sched-clock, and to make x86 TSC handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Iq51
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"These are the locking updates for v5.10:
- Add deadlock detection for recursive read-locks.
The rationale is outlined in commit 224ec489d3 ("lockdep/
Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used
to switch between two copies of protected data. This allows the
read path, typically NMIs, to safely interrupt the write side
critical section.
We utilize this new variant for sched-clock, and to make x86 TSC
handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes"
* tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"
lockdep: Fix lockdep recursion
lockdep: Fix usage_traceoverflow
locking/atomics: Check atomic-arch-fallback.h too
locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc
lockdep: Optimize the memory usage of circular queue
seqlock: Unbreak lockdep
seqlock: PREEMPT_RT: Do not starve seqlock_t writers
seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support
seqlock: seqcount_t: Implement all read APIs as statement expressions
seqlock: Use unique prefix for seqcount_t property accessors
seqlock: seqcount_LOCKNAME_t: Standardize naming convention
seqlock: seqcount latch APIs: Only allow seqcount_latch_t
rbtree_latch: Use seqcount_latch_t
x86/tsc: Use seqcount_latch_t
timekeeping: Use seqcount_latch_t
time/sched_clock: Use seqcount_latch_t
seqlock: Introduce seqcount_latch_t
mm/swap: Do not abuse the seqcount_t latching API
time/sched_clock: Use raw_read_seqcount_latch() during suspend
...
When TABs are being used to indent the code excerpts inside the bullet
lists some of the tools [vim in particular] fail to recognize it and
continue interpreting the special characters inside the quoted excerpt.
Update indentation in driver.rst for code excerpts to avoid
their special interpretation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201007143817.76335-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add properties: #address-cells, #size-cells and ranges. Due to the
Hisilicon CPU controller node may contains child nodes, change the value
of "additionalProperties" from "false" to "type: object".
The corresponding examples are also added.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201012061225.1597-11-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add properties: #reset-cells, #address-cells, #size-cells and ranges. Due
to the Hisilicon system controller node may contains child nodes, change
the value of "additionalProperties" from "false" to "type: object". The
examples have also been updated.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201012061225.1597-10-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Core:
- Allow trimming of interrupt hierarchy to support odd hardware setups
where only a subset of the interrupts requires the full hierarchy.
- Allow the retrigger mechanism to follow a hierarchy to simplify
driver code.
- Provide a mechanism to force enable wakeup interrrupts on suspend.
- More infrastructure to handle IPIs in the core code
Architectures:
- Convert ARM/ARM64 IPI handling to utilize the interrupt core code.
Drivers:
- The usual pile of new interrupt chips (MStar, Actions Owl, TI PRUSS,
Designware ICTL)
- ARM(64) IPI related conversions
- Wakeup support for Qualcom PDC
- Prevent hierarchy corruption in the NVIDIA Tegra driver
- The usual small fixes, improvements and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=1ewL
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Allow trimming of interrupt hierarchy to support odd hardware
setups where only a subset of the interrupts requires the full
hierarchy.
- Allow the retrigger mechanism to follow a hierarchy to simplify
driver code.
- Provide a mechanism to force enable wakeup interrrupts on suspend.
- More infrastructure to handle IPIs in the core code
Architectures:
- Convert ARM/ARM64 IPI handling to utilize the interrupt core code.
Drivers:
- The usual pile of new interrupt chips (MStar, Actions Owl, TI
PRUSS, Designware ICTL)
- ARM(64) IPI related conversions
- Wakeup support for Qualcom PDC
- Prevent hierarchy corruption in the NVIDIA Tegra driver
- The usual small fixes, improvements and cleanups all over the
place"
* tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
dt-bindings: interrupt-controller: Add MStar interrupt controller
irqchip/irq-mst: Add MStar interrupt controller support
soc/tegra: pmc: Don't create fake interrupt hierarchy levels
soc/tegra: pmc: Allow optional irq parent callbacks
gpio: tegra186: Allow optional irq parent callbacks
genirq/irqdomain: Allow partial trimming of irq_data hierarchy
irqchip/qcom-pdc: Reset PDC interrupts during init
irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
pinctrl: qcom: Use return value from irq_set_wake() call
pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags
ARM: Handle no IPI being registered in show_ipi_list()
MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller
irqchip: Add Actions Semi Owl SIRQ controller
dt-bindings: interrupt-controller: Add Actions SIRQ controller binding
dt-bindings: dw-apb-ictl: Update binding to describe use as primary interrupt controller
irqchip/dw-apb-ictl: Add primary interrupt controller support
irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domains
genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
...
Core:
- Early boot support for the NMI safe timekeeper by utilizing
local_clock() up to the point where timekeeping is initialized. This
allows printk() to store multiple timestamps in the ringbuffer which is
useful for coordinating dmesg information across a fleet of machines.
- Provide a multi-timestamp accessor for printk()
- Make timer init more robust by checking for invalid timer flags.
- Comma vs. semicolon fixes
Drivers:
- Support for new platforms in existing drivers (SP804 and Renesas CMT)
- Comma vs. semicolon fixes
-----BEGIN PGP SIGNATURE-----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=h6YX
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"Updates for timekeeping, timers and related drivers:
Core:
- Early boot support for the NMI safe timekeeper by utilizing
local_clock() up to the point where timekeeping is initialized.
This allows printk() to store multiple timestamps in the ringbuffer
which is useful for coordinating dmesg information across a fleet
of machines.
- Provide a multi-timestamp accessor for printk()
- Make timer init more robust by checking for invalid timer flags.
- Comma vs semicolon fixes
Drivers:
- Support for new platforms in existing drivers (SP804 and Renesas
CMT)
- Comma vs semicolon fixes
* tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/armada-370-xp: Use semicolons rather than commas to separate statements
clocksource/drivers/mps2-timer: Use semicolons rather than commas to separate statements
timers: Mask invalid flags in do_init_timer()
clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode
clocksource/drivers/sp804: Add support for Hisilicon sp804 timer
clocksource/drivers/sp804: Support non-standard register offset
clocksource/drivers/sp804: Prepare for support non-standard register offset
clocksource/drivers/sp804: Remove a mismatched comment
clocksource/drivers/sp804: Delete the leading "__" of some functions
clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h
clocksource/drivers/sp804: Cleanup clk_get_sys()
dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support
alarmtimer: Convert comma to semicolon
timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper
timekeeping: Utilize local_clock() for NMI safe timekeeper during early boot
Document all ARMv5, ARMv6 and ARMv7 i.MX compatibles to fix dtbs_check
warnings like:
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dt.yaml: pwm@2080000: compatible:0:
'fsl,imx6q-pwm' is not one of ['fsl,imx8mm-pwm', 'fsl,imx8mn-pwm', 'fsl,imx8mp-pwm', 'fsl,imx8mq-pwm']
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200925212609.23093-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
James Morse.
* Add support for controlling per-thread memory bandwidth throttling
delay values on hw which supports it, by Fenghua Yu.
-----BEGIN PGP SIGNATURE-----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=u3qb
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- Misc cleanups to the resctrl code in preparation for the ARM side
(James Morse)
- Add support for controlling per-thread memory bandwidth throttling
delay values on hw which supports it (Fenghua Yu)
* tag 'x86_cache_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Enable user to view thread or core throttling mode
x86/resctrl: Enumerate per-thread MBA controls
cacheinfo: Move resctrl's get_cache_id() to the cacheinfo header file
x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps
x86/resctrl: Merge AMD/Intel parse_bw() calls
x86/resctrl: Add struct rdt_membw::arch_needs_linear to explain AMD/Intel MBA difference
x86/resctrl: Use is_closid_match() in more places
x86/resctrl: Include pid.h
x86/resctrl: Use container_of() in delayed_work handlers
x86/resctrl: Fix stale comment
x86/resctrl: Remove struct rdt_membw::max_delay
x86/resctrl: Remove unused struct mbm_state::chunks_bw
* Move clearcpuid= parameter handling earlier in the boot, away from the
FPU init code and to a generic location, by Mike Hommey.
-----BEGIN PGP SIGNATURE-----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=lvdt
-----END PGP SIGNATURE-----
Merge tag 'x86_fpu_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Borislav Petkov:
- Allow clearcpuid= to accept multiple bits (Arvind Sankar)
- Move clearcpuid= parameter handling earlier in the boot, away from
the FPU init code and to a generic location (Mike Hommey)
* tag 'x86_fpu_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Handle FPU-related and clearcpuid command line arguments earlier
x86/fpu: Allow multiple bits in clearcpuid= parameter
don't spam the console log, by Chris Down.
* Document how the /proc/cpuinfo machinery works for future reference,
by Kyung Min Park, Ricardo Neri and Dave Hansen.
* Correct the current NMI's duration calculation, by Libing Zhou.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl+ELfcACgkQEsHwGGHe
VUoZ4g//V5dvkmniFs/ZWvFmHvCqdtovQgT0X7C3iHxwdGorrP/2Y7+Ocey4Nss0
TmpQXMnrvxSniMBCSh5Fodm9w1th+5IA6lJ/OETza3ANJyGHswQ9P5FfcY0QtGiE
FUPapV3HKY6G3HGDXDLokCPLeQduY1MeKSRzKAw7E+735+TPlZcmCiTqPBRWcBfw
PWNo9eOJuJMnl+7XbCqCBb7Z8o+hb0jqD42Ky6IL9sVMEVT+UtH50kkf0uJciMjl
23ga1LIPMYJ3vw0mPm945ixNpqxkDsYBQx5Q3PyGHAgqWq9TFytffLY3AScGrUpx
EuzOLWmN2zjAEY2Yw454a9fbKj1b2d4M48JmNyKdG0KxH1X9rtoeS4ECJrXAjd0e
BukrieymwSR6CHj4Yp8ZAq0XVtp7AUdeEOWCMTezbr5Fj+C4GWPetHXurM5C5Gj5
Xes0lkA+wFVzPL6R0gkUBsVXVxtZNmMVfn9HKj7bQP8Ar00g5osZ2yFHduXw8BzA
blYowJ2mt54Pb1ertOM3zxKgIqj0PV2vSz8lRPyXzd4xdkkg6WxzP1EtDj5qHARf
+1X2jBWWY1rNosQi2NlzZRO+GiBOPevyVfxZ1KgRkWRtP9hED8kdfVkhLqPBEP6W
DvnKSAAVQiQe+6HP/anNDKy3TzjX5B3/ZgbZDCt1x78swjLXJwE=
=1bX/
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes fromm Borislav Petkov:
- Ratelimit the message about writes to unrecognized MSRs so that they
don't spam the console log (Chris Down)
- Document how the /proc/cpuinfo machinery works for future reference
(Kyung Min Park, Ricardo Neri and Dave Hansen)
- Correct the current NMI's duration calculation (Libing Zhou)
* tag 'x86_misc_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Fix nmi_handle() duration miscalculation
Documentation/x86: Add documentation for /proc/cpuinfo feature flags
x86/msr: Make source of unrecognised MSR writes unambiguous
x86/msr: Prevent userspace MSR access from dominating the console
devices which doesn't need pinning of pages for DMA anymore. Add support
for the command submission to devices using new x86 instructions like
ENQCMD{,S} and MOVDIR64B. In addition, add support for process address
space identifiers (PASIDs) which are referenced by those command
submission instructions along with the handling of the PASID state on
context switch as another extended state. Work by Fenghua Yu, Ashok Raj,
Yu-cheng Yu and Dave Jiang.
-----BEGIN PGP SIGNATURE-----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=K9X4
-----END PGP SIGNATURE-----
Merge tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
Shenhar.
* New AMD CPUs support, by Yazen Ghannam.
* The usual misc fixes and cleanups all over the subsystem.
-----BEGIN PGP SIGNATURE-----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=ROcp
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add Amazon's Annapurna Labs memory controller EDAC driver (Talel
Shenhar)
- New AMD CPUs support (Yazen Ghannam)
- The usual misc fixes and cleanups all over the subsystem
* tag 'edac_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Set proper family type for Family 19h Models 20h-2Fh
EDAC/mc_sysfs: Add missing newlines when printing {max,dimm}_location
EDAC/aspeed: Use module_platform_driver() to simplify
EDAC, sb_edac: Simplify switch statement
EDAC/ti: Fix handling of platform_get_irq() error
EDAC/aspeed: Fix handling of platform_get_irq() error
EDAC/i5100: Fix error handling order in i5100_init_one()
EDAC/highbank: Handover Calxeda Highbank maintenance to Andre Przywara
EDAC/socfpga: Transfer SoCFPGA EDAC maintainership
EDAC/thunderx: Make symbol lmc_dfs_ents static
EDAC/al-mc-edac: Add Amazon's Annapurna Labs Memory Controller driver
dt-bindings: EDAC: Add Amazon's Annapurna Labs Memory Controller binding
EDAC/mce_amd: Add new error descriptions for existing types
EDAC: Replace HTTP links with HTTPS ones
- Userspace support for the Memory Tagging Extension introduced by Armv8.5.
Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including the
addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU driver and
also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT failure.
- Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+AUXMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFc1B/4q2Kabe+pPu7s1f58Q+OTaEfqcr3F1qh27
F1YpFZUYxg0GPfPsFrnbJpo5WKo7wdR9ceI9yF/GHjs7A/MSoQJis3pG6SlAd9c0
nMU5tCwhg9wfq6asJtl0/IPWem6cqqhdzC6m808DjeHuyi2CCJTt0vFWH3OeHEhG
cfmLfaSNXOXa/MjEkT8y1AXJ/8IpIpzkJeCRA1G5s18PXV9Kl5bafIo9iqyfKPLP
0rJljBmoWbzuCSMc81HmGUQI4+8KRp6HHhyZC/k0WEVgj3LiumT7am02bdjZlTnK
BeNDKQsv2Jk8pXP2SlrI3hIUTz0bM6I567FzJEokepvTUzZ+CVBi
=9J8H
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's quite a lot of code here, but much of it is due to the
addition of a new PMU driver as well as some arm64-specific selftests
which is an area where we've traditionally been lagging a bit.
In terms of exciting features, this includes support for the Memory
Tagging Extension which narrowly missed 5.9, hopefully allowing
userspace to run with use-after-free detection in production on CPUs
that support it. Work is ongoing to integrate the feature with KASAN
for 5.11.
Another change that I'm excited about (assuming they get the hardware
right) is preparing the ASID allocator for sharing the CPU page-table
with the SMMU. Those changes will also come in via Joerg with the
IOMMU pull.
We do stray outside of our usual directories in a few places, mostly
due to core changes required by MTE. Although much of this has been
Acked, there were a couple of places where we unfortunately didn't get
any review feedback.
Other than that, we ran into a handful of minor conflicts in -next,
but nothing that should post any issues.
Summary:
- Userspace support for the Memory Tagging Extension introduced by
Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including
the addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing
page-tables with the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a
no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU
driver and also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT
failure.
- Improve robustness of user-visible HWCAP strings and their
corresponding numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in
preparation for potential future optimisation of handling across
syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
Revert "arm64: initialize per-cpu offsets earlier"
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
...
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCX3ovnSAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0nOAAQCNBCIqY/cRIU7n
DOenCta5WT5r6d0wabXSxtWXVYH9lgEAg0bA1ZUPi5dVwc0cgHbLzmfRYmVsofyL
qLv74FNizg0=
=a7Di
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Support for a new TPM device and fixes and Git URL change (infraded ->
korg)"
* tag 'tpmdd-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
MAINTAINERS: TPM DEVICE DRIVER: Update GIT
tpm_tis: Add a check for invalid status
tpm: use %*ph to print small buffer
dt-bindings: Add SynQucer TPM MMIO as a trivial device
tpm: tis: add support for MMIO TPM on SynQuacer
Add a yamllint config file and support for running yamllint on DT
binding schema files. This runs on the whole tree as yamllint is Python
and suffers from Python's slow startup times.
Users can run on individual files doing:
yamllint -c Documentation/devicetree/bindings/.yamllint <binding file>
Link: https://lore.kernel.org/r/20201009170557.168785-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l12805d
SPI NOR controller drivers changes:
- intel-spi:
- Add Alder Lake-S PCI ID
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAl+AUmoQHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW4y/WB/sH/LcaUciOptcqKQVQcQ5QVV3oj208Oj0F
f+BOk4bt0UJlKEz4szWThOL7UrNd/1jkvxn5wdz9R1pPYdvqor66wXH1fCHSJWIG
EQDIEjcNy2O7MO6oTNNXEoqPc829yUYGsxbcqz54wRHIAkJxiXJCyx3iRt+ymzIR
+NFrcsGjy4ftRo47tn/SGnDHSYtkaPiGiXWqIS114daRtMcQuJMIshalzZ5woKSp
Eyj2+fpcusM72aLtk9DEjBuQBBb7w6fL3wZuAYTFIU7utS3ruqfbTFwS9uvgiH6g
/cuddR2Ku2tBIOllmiwOEsFq/aDmxn6zWp0nW3JNq5nNRarOCfQS
=lh89
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
SPI NOR core changes:
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l12805d
SPI NOR controller drivers changes:
- intel-spi:
- Add Alder Lake-S PCI ID
- Fix a (hopefully final) IRQ state tracking bug vs. MCE handling
- Fix a documentation link
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UbZR
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- Fix a (hopefully final) IRQ state tracking bug vs MCE handling
- Fix a documentation link"
* tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix incorrect references to zero-page.txt
x86/mce: Use idtentry_nmi_enter/exit()
Core changes:
- Allow irq retriggering to follow a hierarchy
- Allow interrupt hierarchies to be trimmed at allocation time
- Allow interrupts to be hidden from /proc/interrupts (IPIs)
- Introduce stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
- New per-cpu IPI handling flow
Architecture changes:
- Move arm/arm64 IPI handling to the core interrupt code, removing
the home brewed accounting
Driver updates:
- New driver for the MStar (and more recently Mediatek) platforms
- New driver for the Actions Owl SIRQ controller
- New driver for the TI PRUSS infrastructure
- Wake-up support for the Qualcomm PDC controller
- Primary interrupt controller support for the Designware APB ICTL
- Convert the IPI code for GIC, GICv3, hip04, armada-270-xp and bcm2836
to using standard interrupts
- Improve GICv3 pseudo-NMI support to deal with both non-secure and secure
priorities on arm64
- Convert the GIC/GICv3 drivers to using HW-based irq retrigger
- A sprinkling of dev_err_probe() conversion
- A set of NVIDIA Tegra fixes for interrupt hierarchy corruption
- A reset fix for the Loongson HTVEC driver
- A couple of error handling fixes in the TI SCI drivers
-----BEGIN PGP SIGNATURE-----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=dfh2
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
Core changes:
- Allow irq retriggering to follow a hierarchy
- Allow interrupt hierarchies to be trimmed at allocation time
- Allow interrupts to be hidden from /proc/interrupts (IPIs)
- Introduce stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
- New per-cpu IPI handling flow
Architecture changes:
- Move arm/arm64 IPI handling to the core interrupt code, removing
the home brewed accounting
Driver updates:
- New driver for the MStar (and more recently Mediatek) platforms
- New driver for the Actions Owl SIRQ controller
- New driver for the TI PRUSS infrastructure
- Wake-up support for the Qualcomm PDC controller
- Primary interrupt controller support for the Designware APB ICTL
- Convert the IPI code for GIC, GICv3, hip04, armada-270-xp and bcm2836
to using standard interrupts
- Improve GICv3 pseudo-NMI support to deal with both non-secure and secure
priorities on arm64
- Convert the GIC/GICv3 drivers to using HW-based irq retrigger
- A sprinkling of dev_err_probe() conversion
- A set of NVIDIA Tegra fixes for interrupt hierarchy corruption
- A reset fix for the Loongson HTVEC driver
- A couple of error handling fixes in the TI SCI drivers
namespace.pl is intended to help locate symbols which are defined but
are not used externally. The goal is to avoid bloat of the namespace in
the resulting kernel image.
The script relies on object data, and only finds unused symbols for the
configuration used to generate that object data. This results in a lot
of false positive warnings such as symbols only used by a single
architecture, or symbols which are used externally only under certain
configurations.
Running namespace.pl using allyesconfig, allmodconfig, and
x86_64_defconfig yields the following results:
* allmodconfig
* 11122 unique symbol names with no external reference
* 1194 symbols listed as multiply defined
* 214 symbols it can't resolve
* allyesconfig
* 10997 unique symbol names with no external reference
* 1194 symbols listed as multiply defined
* 214 symbols it can't resolve
* x86_64_defconfig
* 5757 unique symbol names with no external reference
* 528 symbols listed as multiply defined
* 154 symbols it can't resolve
The script also has no way to easily limit the scope of the checks to
a given subset of the kernel, such as only checking for symbols defined
within a module or subsystem.
Discussion on public mailing lists seems to indicate that many view the
tool output as suspect or not very useful (see discussions at [1] and
[2] for further context).
As described by Masahiro Yamada at [2], namespace.pl provides 3 types of
checks: listing multiply defined symbols, resolving external symbols,
and warnings about symbols with no reference.
The first category of issues is easily caught by the linker as any set
of multiply defined symbols should fail to link. The second category of
issues is also caught by linking, as undefined symbols would cause
issues. Even with modules, these types of issues where a module relies
on an external symbol are caught by modpost.
The remaining category of issues reported is the list of symbols with no
external reference, and is the primary motivation of this script.
However, it ought to be clear from the above examples that the output is
difficult to sort through. Even allyesconfig has ~10000 entries.
The current submit-checklist indicates that patches ought to go through
namespacecheck and fix any new issues arising. But that itself presents
problems. As described at [1], many cases of reports are due to
configuration where a function is used externally by some configuration
settings. Prominent maintainers appear to dislike changes modify code
such that symbols become static based on CONFIG_* flags ([3], and [4])
One possible solution is to adjust the advice and indicate that we only
care about the output of namespacecheck on allyesconfig or allmodconfig
builds...
However, given the discussion at [2], I suspect that few people are
actively using this tool. It doesn't have a maintainer in the
MAINTAINERS flie, and it produces so many warnings for unused symbols
that it is difficult to use effectively. Thus, I propose we simply
remove it.
[1] https://lore.kernel.org/netdev/20200708164812.384ae8ea@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
[2] https://lore.kernel.org/lkml/20190129204319.15238-1-jacob.e.keller@intel.com/
[3] https://lore.kernel.org/netdev/20190828.154744.2058157956381129672.davem@davemloft.net/
[4] https://lore.kernel.org/netdev/20190827210928.576c5fef@cakuba.netronome.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
-----BEGIN PGP SIGNATURE-----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=TrMG
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A handful of changes:
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl9+MLsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqScfCACBLbt8heMyVQQYd130/oIAvQ2o8Bjf
DPa36CVMYOGH1KOCnEyuc+oKsXeJfy33Faxe3+s7q2aMkddH7zhHQNiohPgwWAsM
AuAjRgbAVkDd9BTAbOS/cujftZBBccGRUuusbCg7lsBdwhGQbCggfYbOmGt2B8Gv
Wt3s2td8i90WutFb3UN3ec5N44jTn+WQvuOjX0Dzt/qi3r5qyC5JvcdkW3LAfxEG
X7bJ6cf8HRgUyPAALJGdoWdKT+ImmFbUJc8WuX9PdlYzxR+FyPKQgxD187ARTeLA
OqQSMHi4jRNywei0WUg5YoR0qPAHWKOLIMBK45TWNfa0p2+JzRbxTf3o
=7UL+
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.10-20201007' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
linux-can-next-for-5.10-20201007
The first 3 patches are by me and fix several warnings found
when compiling the kernel with W=1.
Lukas Bulwahn's patch adjusts the MAINTAINERS file, to accommodate
the renaming of the mcp251xfd driver.
Vincent Mailhol contributes 3 patches for the CAN networking layer.
First error queue support is added the the CAN RAW protocol.
The second patch converts the get_can_dlc() and get_canfd_dlc()
in-Kernel-only macros from using __u8 to u8.
The third patch adds a helper function to calculate the length of
one bit in in multiple of time quanta.
Oliver Hartkopp's patch add support for the ISO 15765-2:2016
transport protocol to the CAN stack.
Three patches by Lad Prabhakar add documentation for various
new rcar controllers to the device tree bindings of the rcar_can
and rcan_canfd driver.
Michael Walle's patch adds various processors to the flexcan
driver binding documentation.
The next two patches are by me and target the flexcan driver aswell.
The remove the ack_grp and ack_bit from the fsl,stop-mode DT property
and the driver, as they are not used anymore. As these are the last
two arguments this change will not break existing device trees.
The last three patches are by Srinivas Neeli and target
the xilinx_can driver.
The first one increases the lower limit for the bit rate
prescaler to 2, the other two fix sparse and coverity findings.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a brief blurb saying how and when the kunit_test_suite() macro
works to the usage documentation.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As discussed in [1], KUnit tests have hitherto not had a particularly
consistent naming scheme. This adds documentation outlining how tests
and test suites should be named, including how those names should be
used in Kconfig entries and filenames.
[1]:
https://lore.kernel.org/linux-kselftest/202006141005.BA19A9D3@keescook/t/#u
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add "fw.app.bundle_id" to display the DDP Track ID of the active DDP
package. This id is similar to "fw.bundle_id" and is a unique identifier
for the DDP package that is loaded in the device. Each new DDP has
a unique Track ID generated for it, and the ID can be used to identify
and track the DDP package.
Add documentation for the new devlink info version.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add devlink reload rst documentation file.
Update index file to include it.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enable_remote_dev_reset devlink param flags that the host admin
allows device resets that can be initiated by other hosts. This
parameter is useful for setups where a device is shared by different
hosts, such as multi-host setup. Once the user set this parameter to
false, the driver should NACK any attempt to reset the device while the
driver is loaded.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysfs-pci and sysfs-tagging were mis-filed: their locations within
Documentation/ implied that they were related to file systems. Actually,
each topic is about a very specific *use* of sysfs, and sysfs *happens*
to be a (virtual) filesystem, so this is not really the right place.
It's jarring to be reading about filesystems in general and then come
across these specific details about PCI, and tagging...and then back to
general filesystems again.
Move sysfs-pci to PCI, and move sysfs-tagging to networking. (Thanks to
Jonathan Corbet for coming up with the final locations.)
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20201009070128.118639-1-jhubbard@nvidia.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Document r8a7742 specific compatible strings. No driver change is
needed as the fallback compatible string "renesas,tpu" activates the
right code in the driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These controllers are based on the DW APB SSI IP-core and embedded into
the SoC, so two of them are equipped with IRQ, DMA, 64 words FIFOs and 4
native CS, while another one as being utilized by the Baikal-T1 System
Boot Controller has got a very limited resources: no IRQ, no DMA, only a
single native chip-select and just 8 bytes Tx/Rx FIFOs available. That's
why we have to mark the IRQ to be optional for the later interface.
The SPI controller embedded into the Baikal-T1 System Boot Controller can
be also used to directly access an external SPI flash by means of a
dedicated FSM. The corresponding MMIO region availability is switchable by
the embedded multiplexor, which phandle can be specified in the dts node.
* We added a new example to test out the non-standard Baikal-T1 System
Boot SPI Controller DT binding.
Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201007235511.4935-21-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the support for the Sparx5 SoC.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
These patches are to support audio over DP port on Qualcomm's SC7180 LPASS
Asoc. It includes machine driver, cpu driver, platform driver updates for
HDMI path support, device tree documention, lpass variant structure
optimization and configuration changes.
These patches depends on the DP patch series
https://patchwork.kernel.org/project/dri-devel/list/?series=332029https://lore.kernel.org/patchwork/project/lkml/list/?series=464856
changes since V10:
-- Moved hdmi regmap functions from lpass-hdmi.c to lpass-cpu.c
-- Moved QCOM_REGMAP_FIELD_ALLOC macro from lpass-hdmi.c to lpass.h
changes since V9:
-- Removed unused structures lpass_hdmi.h
changes since V8:
-- Removed redundant structure wrapper for reg map field memebrs
-- Updated lpass_hdmi_regmap_volatile API with appropriate registers as true
and others as false.
changes since V7:
-- Fixed typo errors
-- Created Separate patch for buffer size change
changes since V6:
-- Removed compile time define flag, which used for enabling
HDMI code, based on corresponding config param is included.
-- Updated reg map alloc API with reg map bulk API.
-- Removed unnecessary line splits
changes since V5:
-- Removed unused struct regmap *map in lpass_platform_alloc_hdmidmactl_fields.
-- DMA alloc and free API signature change in lpass-apq8016.c, lpass-ipq806x.c
-- Keeping API "irqreturn_t lpass_platform_hdmiif_irq" under ifdef macro
Changes Since v4:
-- Updated with single compatible node for both I2S and HDMI.
Changes Since v3:
-- Removed id in lpass variant structure and used snd_soc_dai_driver id.
Changes Since v2:
-- Audio buffer size(i.e. LPASS_PLATFORM_BUFFER_SIZE) in lpass-platform.c increased.
Changes Since v1:
-- Commit messages are updated
-- Addressed Rob Herring review comments
V Sujith Kumar Reddy (7):
ASoC: Add sc7180-lpass binding header hdmi define
ASoC: dt-bindings: Add dt binding for lpass hdmi
Asoc:qcom:lpass-cpu:Update dts property read API
Asoc: qcom: lpass:Update lpaif_dmactl members order
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: sc7180: Add support for audio over DP
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 ++--
include/dt-bindings/sound/sc7180-lpass.h | 1 +
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/lpass-apq8016.c | 4 +-
sound/soc/qcom/lpass-cpu.c | 249 ++++++++++++-
sound/soc/qcom/lpass-hdmi.c | 258 ++++++++++++++
sound/soc/qcom/lpass-hdmi.h | 102 ++++++
sound/soc/qcom/lpass-ipq806x.c | 4 +-
sound/soc/qcom/lpass-lpaif-reg.h | 49 ++-
sound/soc/qcom/lpass-platform.c | 395 +++++++++++++++++----
sound/soc/qcom/lpass-sc7180.c | 116 +++++-
sound/soc/qcom/lpass.h | 124 ++++++-
13 files changed, 1240 insertions(+), 143 deletions(-)
create mode 100644 sound/soc/qcom/lpass-hdmi.c
create mode 100644 sound/soc/qcom/lpass-hdmi.h
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Adds bindings for lpass hdmi interface
which can support audio path over dp.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-3-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the PowerPC specific 'sleep' property as a schema. It is
currently only documented in booting-without-of.rst which is getting
removed.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201008142420.2083861-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
All user of the pnp_find_card() compat wrapper are gone, so remove
the function as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
the files under /80211 calls kernel-doc script 207 times, one for each
single function and doc chapter. Due to that, it takes a lot of time
handling it:
$ touch Documentation/driver-api/80211/*rst && time make SPHINXDIRS=driver-api/80211 htmldocs
...
real 0m22,928s
user 0m21,644s
sys 0m1,334s
Reduce the build time by doing only one kernel-doc call
per functions that belong to the same group. With that, there's now
50 calls to kernel-doc, which makes the build time for those docs
62% faster:
$ touch Documentation/driver-api/80211/*rst && time make SPHINXDIRS=driver-api/80211 htmldocs
...
real 0m8,666s
user 0m8,084s
sys 0m0,642s
As a side effect, it should now be easier to add newer
functions, as there's no need to repeat the kernel-doc
pattern.
Measurements made on a NUC8i7HNK machine with lots of ram
and a fast SSD disk with Sphinx 3.2.1.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/f0085721d85ebc3a77164b457ed948eee48b55df.1601890703.git.mchehab+huawei@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sysfs attribute names are mixed with the same normal text terms.
Use ReST to distinguish.
Fix typos and mistakes.
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
Link: https://lore.kernel.org/r/20201008054259.5461-1-ivan.zaentsev@wirenboard.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Venus needs to vote for the performance state of a power domain (cx)
to be able to support DVFS. This 'cx' power domain is controlled by
rpmh and is a common power domain (scalable) not specific to
venus alone. This is optional in the sense that, leaving this power
domain out does not really impact the functionality but just makes
the platform a little less power efficient.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since commit:
048e3a34a2 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment
the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode
acknowledge and not the acknowledgment on chip level.
This means the 4th and 5th value of the property "fsl,stop-mode" isn't used
anymore. It will be removed from the driver in the next patch, so remove it
from the binding documentation.
Link: http://lore.kernel.org/r/20201006203748.1750156-14-mkl@pengutronix.de
Fixes: 048e3a34a2 ("can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment")
Cc: devicetree <devicetree@vger.kernel.org>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The compatible is a pattern match. Explicitly list all possible values.
Also mention that the ls1028ar1 must be followed by lx2160ar1.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201001091131.30514-2-michael@walle.cc
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Document RZ/G1H (r8a7742) SoC specific bindings. The R8A7742 CAN module
is identical to R-Car Gen2 family.
No driver change is needed due to the fallback compatible value
"renesas,rcar-gen2-can".
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200816190732.6905-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit. As common/shared
schema are included by other schemas, they should always allow for
additionalProperties.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-5-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
In cases where we don't reference another schema, 'additionalProperties'
can be used instead. This is preferred for now as 'unevaluatedProperties'
support isn't implemented yet.
In a few cases, this means adding some missing property definitions of
which most are for SPI bus properties. 'unevaluatedProperties' is not going
to work for the SPI bus properties anyways as they are evaluated from the
parent node, not the SPI child node.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This doesn't yet do anything in the tools, but make it explicit so we can
check either 'unevaluatedProperties' or 'additionalProperties' is present
in schemas.
'unevaluatedProperties' is appropriate when including another schema (via
'$ref') and all possible properties and/or child nodes are not
explicitly listed in the schema with the '$ref'.
This is in preparation to add a meta-schema to check for missing
'unevaluatedProperties' or 'additionalProperties'. This has been a
constant source of review issues.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20201005183830.486085-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Revised patch fixing six spelling errors within
Documentation/devicetree/bindings/. "specfied" replaced with "specified"
in all three files modified. "atleast" seperated into "at least" three
times in samsung-pinctrl.txt. This should remove any confusion that a
reader might have.
Signed-off-by: Marlon Rac Cambasis <marlonrc08@gmail.com>
Link: https://lore.kernel.org/r/20201007071705.GA11381@marlonpc-debian
Signed-off-by: Rob Herring <robh@kernel.org>
Update the installation commands and path details, detail the new
options available in the run_kselftests.sh script.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Patch here adds a cpumask attr to hv_gpci pmu along with ABI documentation.
Primary use to expose the cpumask is for the perf tool which has the
capability to parse the driver sysfs folder and understand the
cpumask file. Having cpumask file will reduce the number of perf command
line parameters (will avoid "-C" option in the perf tool
command line). It can also notify the user which is
the current cpu used to retrieve the counter data.
command:# cat /sys/devices/hv_gpci/cpumask
0
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201003074943.338618-5-kjain@linux.ibm.com
Recently introduced Allwinner A100 pinctrl block has 7 interrupts.
This trig a warning when running dtb_checks:
sun50i-a100-allwinner-perf1.dt.yaml: pinctrl@300b000: interrupts: [...] is too long
From schema: .../allwinner,sun4i-a10-pinctrl.yaml
Fix this by allowing up to 7 interrupts.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201005190939.21016-1-peron.clem@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PVT controller (MR75203) is used to configure & control
Moortec embedded analog IP which contains temprature sensor(TS),
voltage monitor(VM) & process detector(PD) modules.
Add DT bindings schema for PVT controller.
Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/b540b49ca47d75c5f716f8a4e4eed0664a1116bf.1601889876.git.rahul.tanwar@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some boards might have a regulator that control the +VS supply, add it
to the bindings.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201001145738.17326-3-alban.bedel@aerq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In order to automate the verification of DT nodes convert lm75.txt to
lm75.yaml.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201001145738.17326-2-alban.bedel@aerq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the Hisilicon Hi6220 domain controllers binding to DT schema
format using json-schema. All of them are grouped into one yaml file, to
help users understand differences and avoid repeated descriptions.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20200930031712.2365-16-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
There are two vendor prefixes for Gateworks: "gw" and "gateworks".
Favor the longer one (more descriptive) and mark "gw" as deprecated so
it will not be used in new bindings.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201003103335.23404-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Update the AM65x HwSpinlock example to fix couple of warnings
that started showing up after the conversion of K3 bindings to
YAML format in commit 66e06509aa ("dt-bindings: arm: ti:
Convert K3 board/soc bindings to DT schema").
compatible: ['ti,am654'] is not valid under any of the given schemas (Possible causes of the failure):
compatible: ['ti,am654'] is too short
compatible:0: 'ti,am654' is not one of ['ti,am654-evm']
Also, fix one of the node names while at this.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200928225155.12432-1-s-anna@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
The i.MX 53 and i.MX6Q DTS use two compatibles, i.MX 6SL/6SLL/SX three
so update the binding to fix dtbs_check warnings like:
serial@21ec000: compatible: ['fsl,imx6q-uart', 'fsl,imx21-uart'] is not valid under any of the given schemas
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200925212649.23183-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add quite common property - power-domains - to fix dtbs_check warnings
like:
arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml:
mailbox@5d280000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201002161837.5784-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull ARM cpufreq updates for 5.10-rc1 from Viresh Kumar:
"- STI cpufreq driver updates to allow new hardware (Alain Volmat).
- Minor tegra driver fixes around initial frequency mismatch warnings (Jon
Hunter).
- dev_err simplification for s5pv210 driver (Krzysztof Kozlowski).
- Qcom driver updates to allow new hardware and minor cleanup (Manivannan
Sadhasivam and Matthias Kaehlcke).
- Add missing MODULE_DEVICE_TABLE for armada driver (Pali Rohár).
- Improved defer-probe handling in cpufreq-dt driver (Stephan Gerhold).
- Call dev_pm_opp_of_remove_table() unconditionally for imx driver (Viresh
Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom: Don't add frequencies without an OPP
cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC
cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size
cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code
dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible
cpufreq: qcom-hw: Make use of cpufreq driver_data for passing pdev
cpufreq: armada-37xx: Add missing MODULE_DEVICE_TABLE
cpufreq: arm: Kconfig: add CPUFREQ_DT depend for STI CPUFREQ
cpufreq: dt-platdev: Blacklist st,stih418 SoC
cpufreq: sti-cpufreq: add stih418 support
cpufreq: s5pv210: Use dev_err instead of pr_err in probe
cpufreq: s5pv210: Simplify with dev_err_probe()
cpufreq: tegra186: Fix initial frequency
cpufreq: dt: Refactor initialization to handle probe deferral properly
opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()
cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, sythetic events only support static string fields such as:
# echo 'test_latency u64 lat; char somename[32]' > /sys/kernel/debug/tracing/synthetic_events
Which is fine, but wastes a lot of space in the event.
It also prevents the most commonly-defined strings in the existing
trace events e.g. those defined using __string(), from being passed to
synthetic events via the trace() action.
With this change, synthetic events with dynamic fields can be defined:
# echo 'test_latency u64 lat; char somename[]' > /sys/kernel/debug/tracing/synthetic_events
And the trace() action can be used to generate events using either
dynamic or static strings:
# echo 'hist:keys=name:lat=common_timestamp.usecs-$ts0:onmatch(sys.event).test_latency($lat,name)' > /sys/kernel/debug/tracing/events
The synthetic event dynamic strings are implemented in the same way as
the existing __data_loc strings and appear as such in the format file.
[ <rostedt@goodmis.org>: added __set_synth_event_print_fmt() changes:
I added the following to make it work with trace-cmd. Dynamic strings
must have __get_str() for events in the print_fmt otherwise it can't be
parsed correctly. ]
Link: https://lore.kernel.org/r/cover.1601588066.git.zanussi@kernel.org
Link: https://lkml.kernel.org/r/3ed35b6d0e390f5b94cb4a9ba1cc18f5982ab277.1601848695.git.zanussi@kernel.org
Tested-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Mention that new CMDs will be NACKed while the old one is still
on-going, that the I2C address parameter of READ_BYTES is 7 bit only,
and reword one paragraph to be more precise.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull networking fixes from David Miller:
1) Make sure SKB control block is in the proper state during IPSEC
ESP-in-TCP encapsulation. From Sabrina Dubroca.
2) Various kinds of attributes were not being cloned properly when we
build new xfrm_state objects from existing ones. Fix from Antony
Antony.
3) Make sure to keep BTF sections, from Tony Ambardar.
4) TX DMA channels need proper locking in lantiq driver, from Hauke
Mehrtens.
5) Honour route MTU during forwarding, always. From Maciej
Żenczykowski.
6) Fix races in kTLS which can result in crashes, from Rohit
Maheshwari.
7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan
Jha.
8) Use correct address family in xfrm state lookups, from Herbert Xu.
9) A bridge FDB flush should not clear out user managed fdb entries
with the ext_learn flag set, from Nikolay Aleksandrov.
10) Fix nested locking of netdev address lists, from Taehee Yoo.
11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau.
12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit.
13) Don't free command entries in mlx5 while comp handler could still be
running, from Eran Ben Elisha.
14) Error flow of request_irq() in mlx5 is busted, due to an off by one
we try to free and IRQ never allocated. From Maor Gottlieb.
15) Fix leak when dumping netlink policies, from Johannes Berg.
16) Sendpage cannot be performed when a page is a slab page, or the page
count is < 1. Some subsystems such as nvme were doing so. Create a
"sendpage_ok()" helper and use it as needed, from Coly Li.
17) Don't leak request socket when using syncookes with mptcp, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net/core: check length before updating Ethertype in skb_mpls_{push,pop}
net: mvneta: fix double free of txq->buf
net_sched: check error pointer in tcf_dump_walker()
net: team: fix memory leak in __team_options_register
net: typhoon: Fix a typo Typoon --> Typhoon
net: hinic: fix DEVLINK build errors
net: stmmac: Modify configuration method of EEE timers
tcp: fix syn cookied MPTCP request socket leak
libceph: use sendpage_ok() in ceph_tcp_sendpage()
scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
tcp: use sendpage_ok() to detect misused .sendpage
nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
net: introduce helper sendpage_ok() in include/linux/net.h
net: usb: pegasus: Proper error handing when setting pegasus' MAC address
net: core: document two new elements of struct net_device
netlink: fix policy dump leak
net/mlx5e: Fix race condition on nhe->n pointer in neigh update
net/mlx5e: Fix VLAN create flow
...
Building the kernel with Clang doesn't rely on third party patches, and
has not for a few years now.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200929211936.580805-1-ndesaulniers@google.com
[jc: Took out duplicated "docs" pointed out by Randy]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pattern properties go under 'patternProperties', not 'properties'.
Otherwise, the pattern is treated as a literal string.
A corresponding meta-schema check has been added to catch bad DT property
names like this.
Fixes: e0f946915b ("dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller")
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201002230606.3522954-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Some DSI controllers are missing a reference to the recently added
dsi-controller.yaml schema. Add it and we can drop the duplicate parts.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201002225924.3513700-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Board/SoC top-level compatible bindings should be constrained to the root
node. Add the missing constraints that the node name must be "/".
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Anders Berg <anders.berg@lsi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201001200943.1193870-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull opertaing performance points (OPP) framework fixes for 5.10-rc1
from Viresh Kumar:
"- Return -EPROBE_DEFER properly from dev_pm_opp_get_opp_table()
(Stephan Gerhold).
- Minor cleanups around required-opps (Stephan Gerhold).
- Extends opp-supported-hw property to contain multiple versions
(Viresh Kumar).
- Multiple cleanups around dev_pm_opp_attach_genpd() (Viresh Kumar).
- Multiple fixes, cleanups in the OPP core for overall better design
(Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Allow opp-level to be set to 0
opp: Prevent memory leak in dev_pm_opp_attach_genpd()
ARM: tegra: Pass multiple versions in opp-supported-hw property
opp: Allow opp-supported-hw to contain multiple versions
dt-bindings: opp: Allow opp-supported-hw to contain multiple versions
opp: Set required OPPs in reverse order when scaling down
opp: Reduce code duplication in _set_required_opps()
opp: Drop unnecessary check from dev_pm_opp_attach_genpd()
opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()
opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
opp: Remove _dev_pm_opp_find_and_remove_table() wrapper
opp: Split out _opp_set_rate_zero()
opp: Reuse the enabled flag in !target_freq path
opp: Rename regulator_enabled and use it as status of all resources
* pm-cpuidle:
cpuidle: record state entry rejection statistics
cpuidle: psci: Allow PM domain to be initialized even if no OSI mode
firmware: psci: Extend psci_set_osi_mode() to allow reset to PC mode
ACPI: processor: Print more information when acpi_processor_evaluate_cst() fails
cpuidle: tegra: Correctly handle result of arm_cpuidle_simple_enter()
1. Update extcon driver with minor updates:
- Covert the devicetree binding format from txt to yaml and edit
the bidning document for extcon-ptn5150.c.
- Clean-up the code of extcon-ptn5150.c without any behavior changes.
- Replace HTTP links with HTTPS ones on extcon-palmas.c and extcon-usb-gpio.c.
- Return the proper error code on extcon-max14577/max77693/max77843.c.
- Simplify with dev_err_probe() on extcon-palmas.c.
- Use module_platform_driver to simplify the code on extcon-axp288.c.
2. Update MAINTAINERS
- Add Krzysztof Kozlowski as maintainer of NXP PTN5150A CC/extcon driver
to provide review, feedback and testing.
-----BEGIN PGP SIGNATURE-----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=nNNl
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-5.10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Detailed description for this pull request:
1. Update extcon driver with minor updates:
- Covert the devicetree binding format from txt to yaml and edit
the bidning document for extcon-ptn5150.c.
- Clean-up the code of extcon-ptn5150.c without any behavior changes.
- Replace HTTP links with HTTPS ones on extcon-palmas.c and extcon-usb-gpio.c.
- Return the proper error code on extcon-max14577/max77693/max77843.c.
- Simplify with dev_err_probe() on extcon-palmas.c.
- Use module_platform_driver to simplify the code on extcon-axp288.c.
2. Update MAINTAINERS
- Add Krzysztof Kozlowski as maintainer of NXP PTN5150A CC/extcon driver
to provide review, feedback and testing.
* tag 'extcon-next-for-5.10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: (25 commits)
extcon: axp288: Use module_platform_driver to simplify the code
extcon: ptn5150: Do not print error during probe if nothing is attached
extcon: ptn5150: Use defines for registers
extcon: palmas: Simplify with dev_err_probe()
extcon: max8997: Return error code of extcon_dev_allocate()
extcon: max77843: Return error code of extcon_dev_allocate()
extcon: max77693: Return error code of extcon_dev_allocate()
extcon: max14577: Return error code of extcon_dev_allocate()
extcon: ptn5150: Set the VBUS and POLARITY property capability
extcon: ptn5150: Switch to GENMASK() and BIT() macros
extcon: ptn5150: Deduplicate parts of dev_err_probe()
extcon: Replace HTTP links with HTTPS ones
MAINTAINERS: Add entry for NXP PTN5150A CC driver
extcon: ptn5150: Convert to .probe_new
extcon: ptn5150: Convert to module_i2c_driver
extcon: ptn5150: Reduce the amount of logs on deferred probe
extcon: ptn5150: Make 'vbus-gpios' optional
extcon: ptn5150: Check current USB mode when probing
extcon: ptn5150: Lower the noisiness of probe
extcon: ptn5150: Simplify getting vbus-gpios with flags
...
The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:
Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20200928155953.2819930-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds dts bindings for the zinitix bt541 touchscreen.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201001122949.16846-2-michael.srba@seznam.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I was too quick moving zoran.rst... it ends that the original
patch didn't do the right thing and forgot to update the files
that references it.
Fix it.
Fixes: 6b90346919 ("media: zoran: move documentation file to the right place")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds hwmon functionality for Intel MAX 10 BMC chip. This BMC
chip connects to a set of sensor chips to monitor current, voltage,
thermal and power of different components on board. The BMC firmware is
responsible for sensor data sampling and recording in shared registers.
Host driver reads the sensor data from these shared registers and
exposes them to users as hwmon interfaces.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1600669071-26235-3-git-send-email-yilun.xu@intel.com
[groeck: Adjusted subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for mp295 device from Monolithic Power Systems, Inc. (MPS)
vendor. This is a dual-loop, digital, multi-phase controller.
This device:
- Supports two power rail.
- Provides 8 pulse-width modulations (PWMs), and can be configured up
to 8-phase operation for rail 1 and up to 4-phase operation for rail
2.
- Supports two pages 0 and 1 for telemetry and also pages 2 and 3 for
configuration.
- Can configured VOUT readout in direct or VID format and allows
setting of different formats on rails 1 and 2. For VID the following
protocols are available: VR13 mode with 5-mV DAC; VR13 mode with
10-mV DAC, IMVP9 mode with 5-mV DAC.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20200926204957.10268-2-vadimp@nvidia.com
[groeck: Cleaned up a couple of error returns; fixed up API changes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update the documentation with the newly added features
* Set the accumulation interval based on resolution
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20200929105322.8919-5-nchatrad@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There is no such property as duplex-full. It's called full-duplex. Leading to
reduced speed when using the example as base for a real device tree.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The unit address should be 1e, because the unit address is supposed
to be in hexadecimal.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add yaml for the bq25980 flash charger.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- Add dt-bindings for Toshiba Visconti ARM SoCs
- Add dt-bindings for the TMPV7708 RM main board
- Add initial support for Toshiba Visconti platform
- Add device tree for TMPV7708 RM main board
- Add information for Toshiba Visconti ARM SoCs to MAINTAINERS
- Enable configs for Toshiba Visconti to arm64's defconfig
-----BEGIN PGP SIGNATURE-----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=RVbA
-----END PGP SIGNATURE-----
Merge tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt
Visconti5 SoC changes for v5.10 (take two)
- Add dt-bindings for Toshiba Visconti ARM SoCs
- Add dt-bindings for the TMPV7708 RM main board
- Add initial support for Toshiba Visconti platform
- Add device tree for TMPV7708 RM main board
- Add information for Toshiba Visconti ARM SoCs to MAINTAINERS
- Enable configs for Toshiba Visconti to arm64's defconfig
* tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
arm64: defconfig: Enable configs for Toshiba Visconti
MAINTAINERS: Add information for Toshiba Visconti ARM SoCs
arm64: dts: visconti: Add device tree for TMPV7708 RM main board
arm64: visconti: Add initial support for Toshiba Visconti platform
dt-bindings: arm: toshiba: Add the TMPV7708 RM main board
dt-bindings: arm: toshiba: add Toshiba Visconti ARM SoCs
Link: https://lore.kernel.org/r/20200923085236.4hu53gmnnmqkttuy@toshiba.co.jp
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add support for MT8167 to Mediatek SMI.
2. Compile test fix (omap-gpmc) and duplicate code (tegra).
3. Simplify code with DEFINE_SHOW_ATTRIBUTE.
-----BEGIN PGP SIGNATURE-----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=THqh
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.10, part two
1. Add support for MT8167 to Mediatek SMI.
2. Compile test fix (omap-gpmc) and duplicate code (tegra).
3. Simplify code with DEFINE_SHOW_ATTRIBUTE.
* tag 'memory-controller-drv-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: emif: Convert to DEFINE_SHOW_ATTRIBUTE
memory: tegra: Convert to DEFINE_SHOW_ATTRIBUTE
memory: omap-gpmc: Fix compile test on SPARC
memory: mtk-smi: add support for MT8167
dt-bindings: memory: mediatek: Add binding for MT8167 SMI
memory: tegra: Delete duplicated argument to '|' in function tegra210_emc_r21021_periodic_compensation
Link: https://lore.kernel.org/r/20200925152523.14608-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This tag allows to build reset-imx7 as a module, and adds support to
reset the Cortex-M4 processor on i.MX8MQ to it, adds support for the
Versal platform to the reset-zynqmp driver, and fixes some kerneldoc
comments in the core and in sti/reset-syscfg.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCX2tCQxcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwNnQAQDnOhM1615HbwZ0YZM+jHC8U8+e
DfzXfsANHTffGJ4kZQEA1Z9uELtzsgQrrrtq3PaVVbYXGUcv2enMAO1AUD/0jwQ=
=zNMu
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.10
This tag allows to build reset-imx7 as a module, and adds support to
reset the Cortex-M4 processor on i.MX8MQ to it, adds support for the
Versal platform to the reset-zynqmp driver, and fixes some kerneldoc
comments in the core and in sti/reset-syscfg.
* tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux:
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
Link: https://lore.kernel.org/r/2b77c90d2b970eb8fa09000b9ecb564bffa76374.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
and the pinecube board
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX3HKAwAKCRDj7w1vZxhR
xc3bAQCcnys+hZ4XtwA/GIT10zcvpBVkUrjU56zZPG9WiEA9AgD/S9PN5m6J0R7O
F8dU+0Xx8O+3KNwIhuqEw2Mj7WHpcwE=
=6hIV
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
A few more DT patches for 5.10, to support simple-framebuffer on the v3s
and the pinecube board
* tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: v3s: Add simple-framebuffer
ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera
dt-bindings: arm: sunxi: add Pine64 PineCube binding
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add vendor prefix for Roseapple Pi: http://roseapplepi.org/
- Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website:
http://roseapplepi.org/index.php/spec/
- Add vendor prefix for Caninos Loucos Program:
https://caninosloucos.org/en/program-en/
- Document Caninos Loucos Labrador SBC manufactured by Laboratory of
Integrated Technological Systems (LSI-TEC), Brazil. This board is based
on Actions Semi S500 SoC. More information about this board can be found
in their website: https://caninosloucos.org/en/labrador-32-en/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl9ptIAACgkQVZ8R5v6R
zvUtBAgAlxNP6fKleQaWm3s0uFCut7WI0hRHgtVvdykFOSXvY6OehZWEDLVRrs4l
+F1gSCr1PY7RaenAYVOQH2uEpLsXOgB/HXRLm40I6bcma4i7uan/b7vTtsHg9ZQy
h2e/rJTEmwjPWw1gyHsEX/h8PW4OI/F2Cr38ZDwNdpTpylv6tBiWhT4ewxGVMt/Y
ejcOLwxw98iIrg7Zjniolju9L7pog1XhgJJDwRhI8kOvo7wvhstsKuc20dq+eIGD
z/ZjVce+TvLYEc0DpRcDkoWvP39PzZ7wHsaDzMHft9y4X0VxWZES/ogsYmKRXstA
Z2WOkcqYKuVPOzS13r5T2A3xNDjzTQ==
=vQTE
-----END PGP SIGNATURE-----
Merge tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi bindings for v5.10
- Add vendor prefix for Roseapple Pi: http://roseapplepi.org/
- Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website:
http://roseapplepi.org/index.php/spec/
- Add vendor prefix for Caninos Loucos Program:
https://caninosloucos.org/en/program-en/
- Document Caninos Loucos Labrador SBC manufactured by Laboratory of
Integrated Technological Systems (LSI-TEC), Brazil. This board is based
on Actions Semi S500 SoC. More information about this board can be found
in their website: https://caninosloucos.org/en/labrador-32-en/
* tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
dt-bindings: arm: actions: Document RoseapplePi
dt-bindings: Add vendor prefix for RoseapplePi.org
dt-bindings: arm: actions: Document Caninos Loucos Labrador
dt-bindings: Add vendor prefix for Caninos Loucos
Link: https://lore.kernel.org/r/20200922113408.GA11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
To compensate for the battery chemistry and operating conditions the
chips support a compensation value. Specify one or two byte compensation
via the maxim,rcomp byte array.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Maxim max17040 is a fuel gauge from a larger family utilising the Model
Gauge technology. Document all different compatible strings that the
max17040 driver recognizes.
Some devices in the wild report double the capacity. The
maxim,double-soc (from State-Of-Charge) property fixes that.
Examples: https://lore.kernel.org/patchwork/patch/1263411/#1468420
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Most of changes are on dwc3 (38.8%) with cdns3 falling close
behind (24.1%).
The biggest changes here are a series of non-critical fixes to corner
cases on dwc3, produced by Thinh N, and a series of major improvements
to cdns3 produced by Peter C.
We also have the traditional set of new device support (Intel Keem
Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch
fixes on dwc3 by yours truly and a set of minor changes all over the
stack.
-----BEGIN PGP SIGNATURE-----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=e08s
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.10 merge window
Most of changes are on dwc3 (38.8%) with cdns3 falling close
behind (24.1%).
The biggest changes here are a series of non-critical fixes to corner
cases on dwc3, produced by Thinh N, and a series of major improvements
to cdns3 produced by Peter C.
We also have the traditional set of new device support (Intel Keem
Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch
fixes on dwc3 by yours truly and a set of minor changes all over the
stack.
* tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits)
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs
usb: dwc2: override PHY input signals with usb role switch support
dt-bindings: usb: dwc2: add optional usb-role-switch property
usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform
dt-bindings: usb: Add Intel Keem Bay USB controller bindings
usb: dwc3: gadget: Support up to max stream id
usb: dwc3: gadget: Return early if no TRB update
usb: dwc3: gadget: Keep TRBs in request order
usb: dwc3: gadget: Revise setting IOC when no TRB left
usb: dwc3: gadget: Look ahead when setting IOC
usb: dwc3: gadget: Allow restarting a transfer
usb: bdc: remove duplicated error message
usb: dwc3: Stop active transfers before halting the controller
usb: cdns3: gadget: enlarge the TRB ring length
usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above
usb: cdns3: gadget: need to handle sg case for workaround 2 case
usb: cdns3: gadget: handle sg list use case at completion correctly
usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case
usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer
...
Currently the sign for CURRENT_NOW and CURRENT_AVG is a bit
of a mess. There are basically 3 different ways battery fuel
gauges report the current:
1. uses negative values for discharging and positive values
for charging
2. uses positive values for discharging and negative values
for discharging (opposit of 1)
3. only uses positive values
As a result userspace currently cannot use the sign at all in
a generic way. Let's solve the issue by documenting a canonical
way for reporting the data and ensure new drivers follow this
way. Then existing drivers can be fixed on a case-by-case basis.
The 'negative value = battery discharging' has been choosen,
since there are only very few drivers doing it the other way
around.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add parser error drop packet traps, so that capable device driver could
register them with devlink. The new packet trap group holds any drops of
packets which were marked by the device as erroneous during header
parsing. Add documentation for every added packet trap and packet trap
group.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch has a certain MDIO address and this needs to be specified using the
reg property. Add it to the example.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The file zero-page.txt does not exit. Add links to zero-page.rst
instead.
[ bp: Massage a bit. ]
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201002190623.7489-1-xypron.glpk@gmx.de
- Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
Hansson).
- Fix typo in the PM documentation (Yoann Congal).
- Add return statement that is missing after recent changes
in the intel_pstate driver (Zhang Rui).
-----BEGIN PGP SIGNATURE-----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=uZW1
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix one more issue related to the recent RCU-lockdep changes, a
typo in documentation and add a missing return statement to
intel_pstate.
Specifics:
- Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
Hansson)
- Fix typo in the PM documentation (Yoann Congal)
- Add return statement that is missing after recent changes in the
intel_pstate driver (Zhang Rui)"
* tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: imx6q: Fixup RCU usage for cpuidle
Documentation: PM: Fix a reStructuredText syntax error
cpufreq: intel_pstate: Fix missing return statement
Try to make minimal changes to the document which already describes
access class 0 in a generic fashion (including IO initiatiors that
are not CPUs).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix compiler warnings on the OMAP when PM is disabled
- Clear the interrupt when setting edge sensitivity on the
Spreadtrum driver.
- Fix up spurious interrupts on the TC35894.
- Support threaded interrupts on the Siox controller.
- Fix resource leaks on the mockup driver.
- Fix line event handling in syscall compatible mode
for the character device.
- Fix an unitialized variable in the PCA953A driver.
- Fix access to all GPIO IRQs on the Aspeed AST2600.
- Fix line direction on the AMD FCH driver.
- Use the bitmap API instead of compiler intrinsics for
bit manipulation in the PCA953x driver.
-----BEGIN PGP SIGNATURE-----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=295T
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some late GPIO fixes for the v5.9 series:
- Fix compiler warnings on the OMAP when PM is disabled
- Clear the interrupt when setting edge sensitivity on the Spreadtrum
driver.
- Fix up spurious interrupts on the TC35894.
- Support threaded interrupts on the Siox controller.
- Fix resource leaks on the mockup driver.
- Fix line event handling in syscall compatible mode for the
character device.
- Fix an unitialized variable in the PCA953A driver.
- Fix access to all GPIO IRQs on the Aspeed AST2600.
- Fix line direction on the AMD FCH driver.
- Use the bitmap API instead of compiler intrinsics for bit
manipulation in the PCA953x driver"
* tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
gpio: pca953x: Use bitmap API over implicit GCC extension
gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION
gpio: aspeed: fix ast2600 bank properties
gpio/aspeed-sgpio: don't enable all interrupts by default
gpio/aspeed-sgpio: enable access to all 80 input & output sgpios
gpio: pca953x: Fix uninitialized pending variable
gpiolib: Fix line event handling in syscall compatible mode
gpio: mockup: fix resource leak in error path
gpio: siox: explicitly support only threaded irqs
gpio: tc35894: fix up tc35894 interrupt configuration
gpio: sprd: Clear interrupt when setting the type as edge
gpio: omap: Fix warnings if PM is disabled
Add sysfs entries for displaying version of FW currently in use as well
as dumping full FW information including build and log-providers hashes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document HS and SS data bus for the "usb-role-switch" enabled case.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200920134905.4370-4-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert ti,hd3ss3220.txt to YAML. Updated the binding documentation
as graph bindings of this device model Super Speed (SS) data bus to
the Super Speed (SS) capable connector.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20200920134905.4370-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All slots in sysrq_key_table[] are either used, reserved or at least
commented with their intended use. This patch adds capital letter versions
available, which means adding 26 more entries.
For already existing SysRq operations the user presses Alt-SysRq-<key>, and
for the newly added ones Alt-Shift-SysRq-<key>.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20200818112825.6445-2-andrzej.p@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two different variants for Hauppauge WinTV MiniCard:
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = {
.name = "Hauppauge WinTV MiniCard",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX,
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = 29,
.board_cfg.foreign_lna0_ctrl = 29,
.rf_switch = 17,
.board_cfg.rf_switch_uhf = 17,
},
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
.name = "Hauppauge WinTV MiniCard Rev 2",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX,
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = -1,
},
As it can be seen, the RF part of the definitions are different.
So, better to use different names in order to distinguish
between them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Core:
- New PHY attribute for max_link_rate
- New phy drivers:
- Rockchip dphy driver moved from staging
- Socionext UniPhier AHCI PHY driver
- Intel LGM SoC USB phy
- Intel Keem Bay eMMC PHY driver
- Updates:
- Support for imx8mp usb phy
- Support for DP Phy and USB3+DP combo phy in QMP driver
- Support for Qualcomm sc7180 DP phy
- Support for cadence torrent PCIe and USB single linke and multilink
configurations along with USB, SGMII/QSGMII configurations
-----BEGIN PGP SIGNATURE-----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=U0WQ
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next
Vinod writes:
phy for 5.9
- Core:
- New PHY attribute for max_link_rate
- New phy drivers:
- Rockchip dphy driver moved from staging
- Socionext UniPhier AHCI PHY driver
- Intel LGM SoC USB phy
- Intel Keem Bay eMMC PHY driver
- Updates:
- Support for imx8mp usb phy
- Support for DP Phy and USB3+DP combo phy in QMP driver
- Support for Qualcomm sc7180 DP phy
- Support for cadence torrent PCIe and USB single linke and multilink
configurations along with USB, SGMII/QSGMII configurations
* tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
phy: qcom-qmp: initialize the pointer to NULL
phy: qcom-qmp: Add support for sc7180 DP phy
phy: qcom-qmp: Add support for DP in USB3+DP combo phy
phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify
phy: qcom-qmp: Get dp_com I/O resource by index
phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy'
phy: qcom-qmp: Remove 'initialized' in favor of 'init_count'
phy: qcom-qmp: Move phy mode into struct qmp_phy
dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information
dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy
dt-bindings: phy: cdns,torrent-phy: add reset-names
phy: rockchip-dphy-rx0: Include linux/delay.h
phy: fix USB_LGM_PHY warning & build errors
phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration
phy: cadence-torrent: Add PCIe + USB multilink configuration
phy: cadence-torrent: Add single link USB register sequences
phy: cadence-torrent: Add single link SGMII/QSGMII register sequences
phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals
phy: cadence-torrent: Add PHY link configuration sequences for single link
phy: cadence-torrent: Add clk changes for multilink configuration
...
Add userspace support for the Memory Tagging Extension introduced by
Armv8.5.
(Catalin Marinas and others)
* for-next/mte: (30 commits)
arm64: mte: Fix typo in memory tagging ABI documentation
arm64: mte: Add Memory Tagging Extension documentation
arm64: mte: Kconfig entry
arm64: mte: Save tags when hibernating
arm64: mte: Enable swap of tagged pages
mm: Add arch hooks for saving/restoring tags
fs: Handle intra-page faults in copy_mount_options()
arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset
arm64: mte: ptrace: Add PTRACE_{PEEK,POKE}MTETAGS support
arm64: mte: Allow {set,get}_tagged_addr_ctrl() on non-current tasks
arm64: mte: Restore the GCR_EL1 register after a suspend
arm64: mte: Allow user control of the generated random tags via prctl()
arm64: mte: Allow user control of the tag check mode via prctl()
mm: Allow arm64 mmap(PROT_MTE) on RAM-based files
arm64: mte: Validate the PROT_MTE request via arch_validate_flags()
mm: Introduce arch_validate_flags()
arm64: mte: Add PROT_MTE support to mmap() and mprotect()
mm: Introduce arch_calc_vm_flag_bits()
arm64: mte: Tags-aware aware memcmp_pages() implementation
arm64: Avoid unnecessary clear_user_page() indirection
...
Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused inline functions
ACPI/IORT: Drop the unused @ops of iort_add_device_replay()
Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
arm64/relocate_kernel: remove redundant code
Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM
Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions
Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
arm64/sve: Implement a helper to load SVE registers from FPSIMD state
arm64/sve: Implement a helper to flush SVE registers
arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
arm64/signal: Update the comment in preserve_sve_context
arm64/fpsimd: Update documentation of do_sve_acc
Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
arm64: mm: Fix missing-prototypes in pageattr.c
arm64/fpsimd: Fix missing-prototypes in fpsimd.c
arm64: hibernate: Remove unused including <linux/version.h>
arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
arm64: Remove the unused include statements
arm64: get rid of TEXT_OFFSET
arm64: traps: Add str of description to panic() in die()
Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64/mm: Unify CONT_PMD_SHIFT
arm64/mm: Unify CONT_PTE_SHIFT
arm64/mm: Remove CONT_RANGE_OFFSET
arm64/mm: Enable THP migration
arm64/mm: Change THP helpers to comply with generic MM semantics
arm64/mm/ptdump: Add address markers for BPF regions
Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
arm64: Enable PCI write-combine resources under sysfs
Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm_pmu: arm64: Use NMIs for PMU
arm_pmu: Introduce pmu_irq_ops
KVM: arm64: pmu: Make overflow handler NMI safe
arm64: perf: Defer irq_work to IPI_IRQ_WORK
arm64: perf: Remove PMU locking
arm64: perf: Avoid PMXEV* indirection
arm64: perf: Add missing ISB in armv8pmu_enable_counter()
perf: Add Arm CMN-600 PMU driver
perf: Add Arm CMN-600 DT binding
arm64: perf: Add support caps under sysfs
drivers/perf: thunderx2_pmu: Fix memory resource error handling
drivers/perf: xgene_pmu: Fix uninitialized resource struct
perf: arm_dsu: Support DSU ACPI devices
arm64: perf: Remove unnecessary event_idx check
drivers/perf: hisi: Add missing include of linux/module.h
arm64: perf: Add general hardware LLC events for PMUv3
Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
arm64: kprobe: clarify the comment of steppable hint instructions
arm64: kprobe: disable probe of fault prone ptrauth instruction
arm64: cpufeature: Modify address authentication cpufeature to exact
arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
arm64: traps: Allow force_signal_inject to pass esr error code
arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
firmware: arm_sdei: Remove _sdei_event_unregister()
firmware: arm_sdei: Remove _sdei_event_register()
firmware: arm_sdei: Introduce sdei_do_local_call()
firmware: arm_sdei: Cleanup on cross call function
firmware: arm_sdei: Remove while loop in sdei_event_unregister()
firmware: arm_sdei: Remove while loop in sdei_event_register()
firmware: arm_sdei: Remove redundant error message in sdei_probe()
firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
firmware: arm_sdei: Unregister driver on error in sdei_init()
firmware: arm_sdei: Avoid nested statements in sdei_init()
firmware: arm_sdei: Retrieve event number from event instance
firmware: arm_sdei: Common block for failing path in sdei_event_create()
firmware: arm_sdei: Remove sdei_is_err()
Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
selftests: arm64: Add build and documentation for FP tests
selftests: arm64: Add wrapper scripts for stress tests
selftests: arm64: Add utility to set SVE vector lengths
selftests: arm64: Add stress tests for FPSMID and SVE context switching
selftests: arm64: Add test for the SVE ptrace interface
selftests: arm64: Test case for enumeration of SVE vector lengths
kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
kselftests/arm64: add PAuth test for whether exec() changes keys
kselftests/arm64: add nop checks for PAuth tests
kselftests/arm64: add a basic Pointer Authentication test
Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
arm64: Move console stack display code to stacktrace.c
arm64: stacktrace: Convert to ARCH_STACKWALK
arm64: stacktrace: Make stack walk callback consistent with generic code
stacktrace: Remove reliable argument from arch_stack_walk() callback
Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
arm64: mm: Pin down ASIDs for sharing mm with devices
Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
arm64: topology: Stop using MPIDR for topology information
Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
arm64/numa: Fix a typo in comment of arm64_numa_init
arm64: fix some spelling mistakes in the comments by codespell
vDSO cleanups.
(Will Deacon)
* for-next/vdso:
arm64: vdso: Fix unusual formatting in *setup_additional_pages()
arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
This patch documents the usb-role-switch property in dwc2 bindings, now
that usb-role-switch support is available in dwc2 driver.
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Binding description for Intel Keem Bay USB controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Output defects can exist in sysfs content using sprintf and snprintf.
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Add a generic sysfs_emit function that knows that the size of the
temporary buffer and ensures that no overrun is done.
Add a generic sysfs_emit_at function that can be used in multiple
call situations that also ensures that no overrun is done.
Validate the output buffer argument to be page aligned.
Validate the offset len argument to be within the PAGE_SIZE buf.
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/884235202216d464d61ee975f7465332c86f76b2.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GX20MH01 device shares family number 0x28 with DS18B20. The device
is generally compatible with DS18B20. Added are the lowest 2^-5, 2^-6
temperature bits in Config register; R2 bit in Config register
enabling 13 and 14 bit resolutions. It is powered up in 14 bit mode.
Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
Link: https://lore.kernel.org/r/20200904160004.87710-2-ivan.zaentsev@wirenboard.ru
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The conversion time of common DS18B20 clones deviates from
datasheet specs. Allow adjustment and automatic measure of the
conversion time.
Add 'conv_time' sysfs attribute:
*read*: Current conversion time in milliseconds.
*write*:
'0': Set default conversion time.
'1': Measure and set the conversion time. Make a
single temperature conversion, poll and measure
an actual value. Measured value is increased
by 20% for temperature drift. A new conversion
time is returned by reading the same attribute.
other positive value:
Set the conversion time in milliseconds.
The setting is active until a resolution change. Then it is reset to
default conversion time for a new resolution.
Add 'features' sysfs attribute to control optional driver settings
per device. Bit masks to read/write (logical OR):
1: Enable check for conversion success. If byte 6 of
scratchpad memory is 0xC after conversion, and
temperature reads 85.00 (powerup value) or 127.94
(insufficient power) - return a conversion error.
2: Enable poll for conversion completion. Generate read cycles
after the conversion start and wait for 1's. In parasite
power mode this feature is not available.
There are some clones of DS18B20 with fixed 12 bit resolution. Make the
driver verify the resolution by reading back the device after resolution
change.
Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Link: https://lore.kernel.org/r/20200904160004.87710-1-ivan.zaentsev@wirenboard.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce sysfs entries to enable userspace clients the ability to read
the serial number and the OEM PK Hash values obtained from BHI. OEMs
need to read these device-specific hardware information values through
userspace for factory testing purposes and cannot be exposed via degbufs
as it may remain disabled for performance reasons. Also, update the
documentation for ABI to include these entries.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mani: used dev_groups to manage sysfs attributes]
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200929175218.8178-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As warned with make htmldocs:
.../Documentation/virt/kvm/devices/vcpu.rst:70: WARNING: Malformed table.
Text in column margin in table line 2.
======= ======================================================
-ENODEV: PMUv3 not supported or GIC not initialized
-ENXIO: PMUv3 not properly configured or in-kernel irqchip not
configured as required prior to calling this attribute
-EBUSY: PMUv3 already initialized
-EINVAL: Invalid filter range
======= ======================================================
The ':' character for two lines are above the size of the column.
Besides that, other tables at the file doesn't use ':', so
just drop them.
While here, also fix this warning also introduced at the same patch:
.../Documentation/virt/kvm/devices/vcpu.rst:88: WARNING: Block quote ends without a blank line; unexpected unindent.
By marking the C code as a literal block.
Fixes: 8be86a5eec ("KVM: arm64: Document PMU filtering API")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/b5385dd0213f1f070667925bf7a807bf5270ba78.1601616399.git.mchehab+huawei@kernel.org
At Hikey 970, setting the SPLIT disable at the General
User Register 3 is required.
Without that, the URBs generated by the usbhid driver
return -EPROTO errors. That causes the code at
hid-core.c to call hid_io_error(), which schedules
a reset_work, causing a call to hid_reset().
In turn, the code there will call:
usb_queue_reset_device(usbhid->intf);
The net result is that the input devices won't work, and
will be reset on every 0.5 seconds:
[ 33.122384] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 33.378220] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
[ 33.698394] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 34.882365] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 35.138217] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
[ 35.458617] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 36.642392] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 36.898207] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
[ 37.218598] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 38.402368] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 38.658174] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
[ 38.978594] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 40.162361] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 40.418148] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
...
[ 397.698132] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
adds the specific compatible string for the DWC2 IP found in the APM82181
SoCs. The APM82181's USB-OTG seems like it was taken from its direct
predecessor: the PPC460EX (canyonlands).
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Controller version 0x0002450D has USB2 PHY RX sensitivity issues
that needs to be worked around by enabling phyrst-a-enable bit
in PHYRST_CFG register.
There is no way to know controller version before device controller
is started and the workaround needs to be applied for both host and
device modes, so we add this DT property.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Converts cdns-usb3.txt to YAML schema cdns,usb3.yaml
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The Amlogic AXG is close to the GXL Glue but with a single OTG PHY.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add compatible for bq34z100 charger.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The binding was added in 2013 and has had no driver since 2015.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200826184851.3431531-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a compatible string for the SynQuacer TPM to the binding for a
TPM exposed via a memory mapped TIS frame. The MMIO window behaves
slightly differently on this hardware, so it requires its own
identifier.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
-----BEGIN PGP SIGNATURE-----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=ALTw
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.10-rc1
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
* tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits)
soundwire: sysfs: add slave status and device number before probe
soundwire: bus: add enumerated Slave device to device list
soundwire: remove an unnecessary NULL check
soundwire: cadence: add data port test fail interrupt
soundwire: intel: enable test modes
soundwire: enable Data Port test modes
soundwire: intel: use {u32|u16}p_replace_bits
soundwire: cadence: use u32p_replace_bits
soundwire: qcom: get max rows and cols info from compatible
soundwire: qcom: add support to block packing mode
soundwire: qcom: clear BIT FIELDs before value set.
soundwire: Add generic bandwidth allocation algorithm
soundwire: cadence: add parity error injection through debugfs
soundwire: bus: export broadcast read/write capability for tests
ASoC: codecs: realtek-soundwire: ignore initial PARITY errors
soundwire: bus: use quirk to filter out invalid parity errors
soundwire: slave: add first_interrupt_done status
soundwire: bus: filter-out unwanted interrupt reports
ASoC/soundwire: bus: use property to set interrupt masks
soundwire: qcom: fix SLIBMUS/SLIMBUS typo
...
The PM660 and PM660L combo is found on boards featuring the
SDM630, SDM636, SDM660 (and SDA variants) and it is used to
give power to practically everything, from core to peripherals.
Document the SMD-RPM regulator entries for both.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-8-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM660 and PM660L combo is found on boards featuring the
SDM630, SDM636, SDM660 (and SDA variants) and it is used to
give power to practically everything, from core to peripherals.
Document the SPMI regulator bindings for both.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-5-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Renesas Ethernet AVB (EthernetAVB-IF) Device Tree binding
documentation to json-schema.
Add missing properties.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).
Add properties for configuring the internal MAC delays.
These properties are mandatory, even when specified as zero, to
distinguish between old and new DTBs.
Update the (bogus) example accordingly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Internal Receive and Transmit Clock Delays are a common setting for
RGMII capable devices.
While these delays are typically applied by the PHY, some MACs support
configuring internal clock delay settings, too. Hence add standardized
properties to configure this.
This is the MAC counterpart of commit 9150069bf5 ("dt-bindings:
net: Add tx and rx internal delays"), which applies to the PHY.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IOMMU UAPI is newly introduced to support communications between guest
virtual IOMMU and host IOMMU. There has been lots of discussions on how
it should work with VFIO UAPI and userspace in general.
This document is intended to clarify the UAPI design and usage. The
mechanics of how future extensions should be achieved are also covered
in this documentation.
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Cc: linux-api@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1601051567-54787-2-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Hisilicon Hip06 SoCs implement a Low Pin Count (LPC)
controller binding to DT schema format using json-schema.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20200929141454.2312-18-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Hisilicon Bootwrapper boot method binding to DT schema format
using json-schema.
The property boot-method contains two groups of physical address range
information: bootwrapper and relocation. The "uint32-array" type is not
suitable for it, because the field "address" and "size" may occupy one or
two cells respectively. Use "minItems: 1" and "maxItems: 2" to allow it
can be written in "<addr size addr size>" or "<addr size>, <addr size>"
format.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20200929141454.2312-15-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Hisilicon system controller and its variants binding to DT
schema format using json-schema. All of them are grouped into one yaml
file, to help users understand differences and avoid repeated
descriptions.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20200929141454.2312-11-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Hisilicon SoC bindings to DT schema format using json-schema.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Split the devicetree bindings of each Hisilicon controller from
hisilicon.txt into a separate file, the file name is the compatible name
attach the .txt file name extension.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20200929141454.2312-4-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
The compatible strings of Hi6220 SRAM controller, HiP05/HiP06 PCIe-SAS
subsystem controller, HiP05/HiP06 PERI subsystem controller and
HiP05/HiP06 DSA subsystem controller is in syscon.yaml now.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20200929141454.2312-3-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Fix some typo in doc.
[hverkuil: The TV encoder are -> The TV encoder is]
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This reverts commit 8dce4b265a.
The revert is slighly modified:
- Documentation/media/v4l-drivers/index.rst is ,ot restored since removed from tree
- drivers/staging/media/Makefile is not restored since the zoran driver
is not compilable yet.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This converts the tca6507 LED binding to yaml.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Using struct|enum :c:`type` here sounds a bad idea, as it may be
documenting data types that were already removed. Also, it makes
the file harder to read.
As automarkup.py should be able to handle those cases, let's
just get rid of the markup.
While not required by automarkup, in order to make easier for
grep, both type and names are now at the same line.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several places there where struct was used twice,
on multiple lines, like:
struct
struct ``v4l2_zoomcap``
That's probably done during the DocBook to ReSt conversion.
Probably the cases where "struct struct" were at the same line
was addressed back then, but the multi-line cases are still
there.
Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The new C domain code on Sphinx 3 is a lot more pedantic.
It only accepts real functions declared as c:function.
So, declarations like this are not valid:
.. c:function::
int (*adap_enable)(struct cec_adapter *adap, bool enable);
Also, no blank lines are allowed after ".. c:function:", and
continuation lines should be like:
.. c:function:
int (void foo, \
int bar);
Change the logic there, in order to avoid lots of warnings
when built with Sphinx 3.x.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are two kernel-doc markups for include/media/v4l2-async.h,
one at v4l2-async.rst and another one at v4l2-subdev.rst.
Sphinx 3.x checks it and complains for duplicated symbols.
So, get rid of one of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several :c:type: definitions there, in order to
do cross-references with the driver's documentation.
Those are broken when docs are built with Sphinx 3.x, as
it would require :c:struct: instead.
For Sphinx < 3.x, the automarkup.py extension is able to do the
replacement already, and a future improvement on it should make
it also work with Sphinx 3.x.
So, get rid of the usage of the :c:type: macro there.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> # for BD70528
Acked-by: Tim Harvey <tharvey@gateworks.com> # for gateworks-gsc.yaml
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch implements the basic functions of the BMC chip for some Intel
FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the
Intel MAX 10 CPLD.
This BMC chip is connected to the FPGA by a SPI bus. To provide direct
register access from the FPGA, the "SPI slave to Avalon Master Bridge"
(spi-avmm) IP is integrated in the chip. It converts encoded streams of
bytes from the host to the internal register read/write on the Avalon
bus. So This driver uses the regmap-spi-avmm for register accessing.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Fix a reStructuredText syntax error in the cpuidle PM admin-guide
documentation: the ``...'' quotation marks are parsed as partial ''...''
reStructuredText markup and break the output formatting.
This change them to "...".
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the LP87524-Q1 to the bindings along with an example. This is a variant
of the LP87565-Q1 and LP87561-Q1 chips which already have bindings.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Also apply a few smaller improvements:
- document that the only possible I2C slave address is 0x60 as per the
datasheet and fix the second example accordingly
- The definition of "xxx-in-supply" was generic, thus define in detail the
possible cases for each chip variant
- remove "MFD driver" from the title as it is implementation specific
- replace "PMIC" with "buck converter" in title as it is more informative
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Document Samsung Exynos3 and Exynos5433 compatibles for system
registers.
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Samsung Exynos System Registers (Sysreg) bindings are quite simple -
just additional compatible to the syscon. They do not have any value so
merge them into generic MFD syscon bindings.
Suggested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There are stray Unicode quotation marks (U+201C DOUBLE TURNED COMMA
QUOTATION MARK) in the file. Remove them, as they don't serve a purpose.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add binding document for the ENE KB3930 Embedded Controller.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
1. Add vendor suffix to all proprietary properties.
2. Fix typo.
3. Change lsw to normal property, not pattern property.
4. Due to item 1, modify source code for property parsing.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1601460480-4259-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's some documentation for gpio-mockup's debugfs interface in the
driver's source but it's not much. Add proper documentation for this
testing module.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Apply following fixes:
- Use 'interrupts'. (interrupts-extended will automagically be supported
by the tools)
- *-supply is always a single item. So, drop maxItems=1
- add "additionalProperties: false" flag to detect unneeded properties.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200923125301.27200-1-o.rempel@pengutronix.de
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: 1b5a78e69c ("dt-binding: can: mcp25xxfd: document device tree bindings")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sphinx 3.x is pedantic with glossary entries:
Documentation/userspace-api/media/glossary.rst:17: WARNING: term device driver not found in case sensitive match.made a reference to Device Driver instead.
Documentation/userspace-api/media/glossary.rst:59: WARNING: term media hardware not found in case sensitive match.made a reference to Media Hardware instead.
Documentation/userspace-api/media/glossary.rst:59: WARNING: term IP block not found in case sensitive match.made a reference to IP Block instead.
Documentation/userspace-api/media/glossary.rst:64: WARNING: term hardware component not found in case sensitive match.made a reference to Hardware Component instead.
Documentation/userspace-api/media/glossary.rst:64: WARNING: term ip block not found in case sensitive match.made a reference to IP Block instead.
Documentation/userspace-api/media/glossary.rst:70: WARNING: term peripheral not found in case sensitive match.made a reference to Peripheral instead.
Documentation/userspace-api/media/glossary.rst:130: WARNING: term V4L2 hardware not found in case sensitive match.made a reference to V4L2 Hardware instead.
Documentation/userspace-api/media/glossary.rst:151: WARNING: term hardware peripheral not found in case sensitive match.made a reference to Hardware Peripheral instead.
Documentation/userspace-api/media/glossary.rst:183: WARNING: term device node not found in case sensitive match.made a reference to Device Node instead.
Documentation/userspace-api/media/glossary.rst:191: WARNING: term bridge driver not found in case sensitive match.made a reference to Bridge Driver instead.
While it works with case-insensitive entires, it complains.
Let's fix it, in order to cleanup the warnings. Also, I won't
doubt that a later change on Sphinx will end breaking support
for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Documentation/driver-api/media/camera-sensor.rst:123: WARNING: Inline literal start-string without end-string.
There's a missing blank space over there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
-----BEGIN PGP SIGNATURE-----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=m4lt
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
dt-bindings: Fix 'reg' size issues in zynqmp examples
ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
dt-bindings: crypto: sa2ul: fix a DT binding check warning
Document new properties for IBAT compensation feature.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This binding can support Ingenic JZ4725B and JZ4770 SoCs, as they are
compatible with Ingenic JZ4740 battery.
Introduce the following compatible property combinations:
compatible = "ingenic,jz4725b-battery", "ingenic,jz4740-battery",
compatible = "ingenic,jz4770-battery", "ingenic,jz4740-battery"
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Convert the textual documentation of Device Tree bindings for the
Ingenic JZ47xx SoCs battery to YAML.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
While chasing in_interrupt() (ab)use in drivers it turned out that the
caif_spi driver has never been in use since the driver was merged 10 years
ago. There never was any matching code which provides a platform device.
The driver has not seen any update (asided of treewide changes and
cleanups) since 8 years and the maintainers vanished from the planet.
So analysing the potential contexts and the (in)correctness of
in_interrupt() usage is just a pointless exercise.
Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We marked /sys/fs/selinux/checkreqprot as deprecated in Linux v5.7,
but didn't provide any guidance as to the timeframe. Considering
the state of checkreqprot, it seems like one year should be enough
time.
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:
Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Improve grammar in recently added sentences:
- Drop superfluous "be" in front of "have",
- Add missing articles.
Fixes: 73f76a41c4 ("dt-bindings: example: Extend based on practice")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200925111429.3146-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Add common properties appearing in DTSes (iommus, power-domains) to fix
dtbs_check warnings like:
arch/arm/boot/dts/exynos4210-i9100.dt.yaml: rotator@12810000:
'iommus', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200923150339.12497-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The LM81 and DS1780 are close relatives of the ADM9240 and already
supported by the same driver. Document them as trivial devices.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200923051637.30464-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Rob Herring <robh@kernel.org>
Add PCI ID of SMBus controller on Intel Alder Lake PCH-S
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
PCI devices support two variants of the D3 power state: D3hot (main power
present) D3cold (main power removed). Previously struct pci_dev contained:
unsigned int d3_delay; /* D3->D0 transition time in ms */
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
"d3_delay" refers specifically to the D3hot state. Rename it to
"d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for
Specifying Device Readiness Durations" in the PCI Firmware spec r3.2,
sec 4.6.9.
There is no change to the functionality.
Link: https://lore.kernel.org/r/20200730210848.1578826-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CONFIG_EFI_VARS controls the code that exposes EFI variables via
sysfs entries, which was deprecated before support for non-Intel
architectures was added to EFI. So let's limit its availability
to Intel architectures for the time being, and hopefully remove
it entirely in the not too distant future.
While at it, let's remove the module alias so that the module is
no longer loaded automatically.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add entries for the AD9434 & AD9265 high-speed ADCs which are supported by
the 'ad9467' driver.
Better describe the family of ADCs similar to AD9467 in the description.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200924080518.96410-5-alexandru.ardelean@analog.com
This binding is non trivial due to the range of different parts
supported having several subtle quirks. Martin has helped
clarify some of them.
Note, I haven't restricted the amlogic,hhi-sysctrl to only
be present on the relevant parts if nvmem stuff also is, but
it would seem to be rather odd if it were otherwise.
Perhaps we look to make this binding more restrictive at a later date.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200920135436.199003-2-jic23@kernel.org
The i.MX 7ULP DTSes use two compatibles so update the binding to fix
dtbs_check warnings like:
arch/arm/boot/dts/imx7ulp-com.dt.yaml: gpio@40ae0000:
compatible: ['fsl,imx7ulp-gpio', 'fsl,vf610-gpio'] is too long
arch/arm/boot/dts/imx7ulp-com.dt.yaml: gpio@40ae0000:
compatible: Additional items are not allowed ('fsl,vf610-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Update the description of the PMU KVM_{GET, SET}_DEVICE_ATTR error codes
to be a better match for the code that returns them.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20200924123731.268177-3-alexandru.elisei@arm.com
KVM_ARM_VCPU_PMU_V3_IRQ returns -EFAULT if get_user() fails when reading
the interrupt number from kvm_device_attr.addr.
KVM_ARM_VCPU_PMU_V3_INIT returns the error value from kvm_vgic_set_owner().
kvm_arm_pmu_v3_init() checks that the vgic has been initialized and the
interrupt number is valid, but kvm_vgic_set_owner() can still return the
error code -EEXIST if another device has already claimed the interrupt.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20200924123731.268177-2-alexandru.elisei@arm.com
Add a small blurb describing how the event filtering API gets used.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The convention for node names is to use hyphens, not underscores.
dtschema expects GPIO hogs to end with 'hog' suffix. Adjust the example
DTS in the binding. No changes to binding itself.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200928184515.7345-1-krzk@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert the Maxim MAX732x family of GPIO expanders bindings to device
tree schema by merging it with existing PCA95xx schema. These are quite
similar so merging reduces duplication.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200916155715.21009-3-krzk@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert the NXP PCA953x family of GPIO expanders bindings to device tree
schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200916155715.21009-2-krzk@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Describe common "gpio-line-names" property to fix dtbs_check warnings
like:
arch/arm/boot/dts/imx53-m53menlo.dt.yaml: gpio@53f84000:
'gpio-line-names' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200920195848.27075-3-krzk@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Several DTSes with ARMv6 and ARMv7 i.MX SoCs introduce their own
compatibles so add them to fix dtbs_check warnings like:
arch/arm/boot/dts/imx35-pdk.dt.yaml: gpio@53fa4000:
compatible: ['fsl,imx35-gpio', 'fsl,imx31-gpio'] is not valid under any of the given schemas
arch/arm/boot/dts/imx51-babbage.dt.yaml: gpio@73f90000:
compatible: ['fsl,imx51-gpio', 'fsl,imx35-gpio'] is not valid under any of the given schemas
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200920195848.27075-2-krzk@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
