Prior to 3.15, there was a race between zap_pte_range() and
page_mkclean() where writes to a page could be lost. Dave Hansen
discovered by inspection that there is a similar race between
move_ptes() and page_mkclean().
We've been able to reproduce the issue by enlarging the race window with
a msleep(), but have not been able to hit it without modifying the code.
So, we think it's a real issue, but is difficult or impossible to hit in
practice.
The zap_pte_range() issue is fixed by commit 1cf35d47712d("mm: split
'tlb_flush_mmu()' into tlb flushing and memory freeing parts"). And
this patch is to fix the race between page_mkclean() and mremap().
Here is one possible way to hit the race: suppose a process mmapped a
file with READ | WRITE and SHARED, it has two threads and they are bound
to 2 different CPUs, e.g. CPU1 and CPU2. mmap returned X, then thread
1 did a write to addr X so that CPU1 now has a writable TLB for addr X
on it. Thread 2 starts mremaping from addr X to Y while thread 1
cleaned the page and then did another write to the old addr X again.
The 2nd write from thread 1 could succeed but the value will get lost.
thread 1 thread 2
(bound to CPU1) (bound to CPU2)
1: write 1 to addr X to get a
writeable TLB on this CPU
2: mremap starts
3: move_ptes emptied PTE for addr X
and setup new PTE for addr Y and
then dropped PTL for X and Y
4: page laundering for N by doing
fadvise FADV_DONTNEED. When done,
pageframe N is deemed clean.
5: *write 2 to addr X
6: tlb flush for addr X
7: munmap (Y, pagesize) to make the
page unmapped
8: fadvise with FADV_DONTNEED again
to kick the page off the pagecache
9: pread the page from file to verify
the value. If 1 is there, it means
we have lost the written 2.
*the write may or may not cause segmentation fault, it depends on
if the TLB is still on the CPU.
Please note that this is only one specific way of how the race could
occur, it didn't mean that the race could only occur in exact the above
config, e.g. more than 2 threads could be involved and fadvise() could
be done in another thread, etc.
For anonymous pages, they could race between mremap() and page reclaim:
THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge
PMD gets unmapped/splitted/pagedout before the flush tlb happened for
the old huge PMD in move_page_tables() and we could still write data to
it. The normal anonymous page has similar situation.
To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and
if any, did the flush before dropping the PTL. If we did the flush for
every move_ptes()/move_huge_pmd() call then we do not need to do the
flush in move_pages_tables() for the whole range. But if we didn't, we
still need to do the whole range flush.
Alternatively, we can track which part of the range is flushed in
move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole
range in move_page_tables(). But that would require multiple tlb
flushes for the different sub-ranges and should be less efficient than
the single whole range flush.
KBuild test on my Sandybridge desktop doesn't show any noticeable change.
v4.9-rc4:
real 5m14.048s
user 32m19.800s
sys 4m50.320s
With this commit:
real 5m13.888s
user 32m19.330s
sys 4m51.200s
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building the caam driver on arm64 produces a harmless warning:
drivers/crypto/caam/caamalg.c:140:139: warning: comparison of distinct pointer types lacks a cast
We can use min_t to tell the compiler which type we want it to use
here.
Fixes: 5ecf8ef910 ("crypto: caam - fix sg dump")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SVG files are larger than the draw dimentions, have long
lines and aren't cleaned. Use inkscape to automatically fix
those issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Somehow, two DVB headers were included twice. Remove the
duplication
Reported-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix use of u32 instead of int for checking for negative errors values
as pointed out by Dan Carpenter <dan.carpenter@oracle.com>.
And while testing the PM runtime error path by randomly returning
failed values in runtime resume, I noticed two more places that need
fixing:
- If pm_runtime_get_sync() fails in probe, we still need to do
pm_runtime_put_sync() to keep the use count happy. We could call
pm_runtime_put_noidle() on the error path, but we're just going
to call pm_runtime_disable() after that so pm_runtime_put_sync()
will do what we want
- We should print an error if pm_runtime_get_sync() fails in
cppi41_dma_alloc_chan_resources() so we know where it happens
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 740b4be3f7 ("dmaengine: cpp41: Fix handling of error path")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
iov_iter_advance() needs to decrement iter->count by the number of
bytes we'd moved beyond. Normal flavours do that, but ITER_PIPE
doesn't and ITER_PIPE generic_file_read_iter() for O_DIRECT files
ends up with a bogus fallback to page cache read, resulting in incorrect
values for file offset and bytes read.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The IOP_XATTR flag is set on sockfs because sockfs supports getting the
"system.sockprotoname" xattr. Since commit 6c6ef9f2, this flag is checked for
setxattr support as well. This is wrong on sockfs because security xattr
support there is supposed to be provided by security_inode_setsecurity. The
smack security module relies on socket labels (xattrs).
Fix this by adding a security xattr handler on sockfs that returns
-EAGAIN, and by checking for -EAGAIN in setxattr.
We cannot simply check for -EOPNOTSUPP in setxattr because there are
filesystems that neither have direct security xattr support nor support
via security_inode_setsecurity. A more proper fix might be to move the
call to security_inode_setsecurity into sockfs, but it's not clear to me
if that is safe: we would end up calling security_inode_post_setxattr after
that as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=TZCv
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.9-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes fr9om Dave Airlie:
"Fixes for amdgpu, and a bunch of arm drivers.
There seems to be an uptick in the ARM drivers sending things for
fixes which is good, so I've decided to dequeue a bit early, more
stuff may arrive before the weekend.
This contains mediatek, arcpgu, sunxi, fsl-dcu display controller
fixes along with 3 amdgpu fixes, one for a fencing issue with
secondary GPUs"
* tag 'drm-fixes-for-v4.9-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu:fix vpost_needed routine
drm/amdgpu/powerplay: drop a redundant NULL check
drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
drm/arcpgu: Accommodate adv7511 switch to DRM bridge
drm/fsl-dcu: disable planes before disabling CRTC
drm/fsl-dcu: update all registers on flush
drm/fsl-dcu: do not update when modifying irq registers
drm/sun4i: Propagate error to the caller
drm/sun4i: Fix error handling
drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range
drm/mediatek: enhance the HDMI driving current
drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
drm/mediatek: clear IRQ status before enable OVL interrupt
drm/mediatek: set vblank_disable_allowed to true
drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE
drm/sun4i: rgb: Remove the bridge enable/disable functions
drm/sun4i: rgb: Enable panel after controller
Also, rearrange things a bit to have a common c4iw_invalidate_mr()
function used everywhere that we need to invalidate.
Fixes: 49b53a93a6 ("iw_cxgb4: add fast-path for small REG_MR operations")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are a few cases in c4iw_post_send() and c4iw_post_receive()
where *bad_wr is not set when an error is returned. This can
cause a crash if the application tries to use bad_wr.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The method rxe_qp_error() transitions QP to error state
and make sure the QP is drained. It did not though update
the QP state for user's query.
This patch fixes this.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RXE resets the send-q only once in rxe_qp_init_req() when
QP is created, but when the QP is reused after QP reset, the send-q
holds previous garbage data.
This garbage data wrongly fails CQEs that otherwise
should have completed successfully.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To correctly handle a erroneous WR this fix does the following
1. Make sure the bad WQE causes a user completion event.
2. Call rxe_completer to handle the erred WQE.
Before the fix, when rxe_requester found a bad WQE, it changed its
status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs.
If this was the 1st WQE then there would be no ACK to invoke the
completer and this bad WQE would be stuck in the QP's send-q.
On top of that the requester exiting with 0 caused rxe_do_task to
endlessly invoke rxe_requester, resulting in a soft-lockup attached
below.
In case the WQE was not the 1st and rxe_completer did get a chance to
handle the bad WQE, it did not cause a complete event since the WQE's
IB_SEND_SIGNALED flag was not set.
Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec
version 1.2.1, section 10.7.3.1 Signaled Completions.
NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s!
[<ffffffffa0590145>] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe]
[<ffffffffa05952ec>] lookup_mem+0x3c/0xc0 [rdma_rxe]
[<ffffffffa0595534>] copy_data+0x1c4/0x230 [rdma_rxe]
[<ffffffffa058c180>] rxe_requester+0x9d0/0x1100 [rdma_rxe]
[<ffffffff8158e98a>] ? kfree_skbmem+0x5a/0x60
[<ffffffffa05962c9>] rxe_do_task+0x89/0xf0 [rdma_rxe]
[<ffffffffa05963e2>] rxe_run_task+0x12/0x30 [rdma_rxe]
[<ffffffffa059110a>] rxe_post_send+0x41a/0x550 [rdma_rxe]
[<ffffffff811ef922>] ? __kmalloc+0x182/0x200
[<ffffffff816ba512>] ? down_read+0x12/0x40
[<ffffffffa054bd32>] ib_uverbs_post_send+0x532/0x540 [ib_uverbs]
[<ffffffff815f8722>] ? tcp_sendmsg+0x402/0xb80
[<ffffffffa05453dc>] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs]
[<ffffffff81623c2e>] ? inet_recvmsg+0x7e/0xb0
[<ffffffff8158764d>] ? sock_recvmsg+0x3d/0x50
[<ffffffff81215b87>] __vfs_write+0x37/0x140
[<ffffffff81216892>] vfs_write+0xb2/0x1b0
[<ffffffff81217ce5>] SyS_write+0x55/0xc0
[<ffffffff816bc672>] entry_SYSCALL_64_fastpath+0x1a/0xa
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, if ib_copy_to_udata fails, the CQ
won't be deleted from the radix tree and the HW (HW2SW).
Fixes: 225c7b1fee ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check the returned GID index value and return an error if it is invalid.
Fixes: 5070cd2239 ('IB/mlx4: Replace mechanism for RoCE GID management')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For XRC QP CQs may not exist. Check before attempting dereference.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When an internal error condition is detected, make sure to set the
device inactive after dispatching the event so ULPs can get a
notification of this event.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When calling reg_mr of large MRs (e.g. 4GB) from multiple processes
and MR caches can't supply the required amount of MRs the slow-path
of MR allocation may be used. In this case we need to serialize the
slow-path between the processes to avoid soft lock.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When creating kernel CQs use 128B CQE stride if the
cache line size is 128B, 64B otherwise. This prevents
multiple CQEs from residing in a 128B cache line,
which can cause retries when there are concurrent
read and writes in one cache line.
Tested with IPoIB on PPC64, saw ~5% throughput
improvement.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Validate that the requested size of RQT is supported by firmware.
Fixes: c5f9092936 ('IB/mlx5: Add Receive Work Queue Indirection table operations')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We need to free dev->port when we fail to enable RoCE or
initialize node data.
Fixes: 0837e86a7a ('IB/mlx5: Add per port counters')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
sg_alloc_table gets unsigned int as parameter while the driver
returns it as size_t. Check npages isn't greater than maximum
unsigned int.
Fixes: eeb8461e36 ("IB: Refactor umem to use linear SG table")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When calling rdma_resolve_ip inside rdma_addr_find_l2_eth_by_grh,
the return status of the request was ignored in the callback function
causing a successful return and an empty dmac.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On Thu, Oct 27, 2016 at 04:36:28PM +0300, Leon Romanovsky wrote:
> From: Mark Bloch <markb@mellanox.com>
>
> If the underlying netowrk type is ipv4 or ipv6 and the device supports
> routable RoCE, prefer it so the traffic could cross subnets.
>
> Signed-off-by: Mark Bloch <markb@mellanox.com>
> Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
> Signed-off-by: Leon Romanovsky <leon@kernel.org>
> ---
Hi Doug,
Please take the following v1 of this patch where I fixed spelling error
from "netowrk" to be "network".
Thanks.
>From 09f96ba3e9b4442cfb44dca04c6726e55525c9c3 Mon Sep 17 00:00:00 2001
From: Mark Bloch <markb@mellanox.com>
Date: Sun, 11 Sep 2016 06:25:10 +0000
Subject: [PATCH rdma-rc v1 3/6] IB/core: Set routable RoCE gid type for ipv4/ipv6
networks
If the underlying network type is ipv4 or ipv6 and the device supports
routable RoCE, prefer it so the traffic could cross subnets.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When there is a CM id object that has port assigned to it, it means that
the cm-id asked for the specific port that it should go by it, but if
that port was removed (hot-unplug event) the cm-id was not updated.
In order to fix that the port keeps a list of all the cm-id's that are
planning to go by it, whenever the port is removed it marks all of them
as invalid.
This commit fixes a kernel panic which happens when running traffic between
guests and we force reboot a guest mid traffic, it triggers a kernel panic:
Call Trace:
[<ffffffff815271fa>] ? panic+0xa7/0x16f
[<ffffffff8152b534>] ? oops_end+0xe4/0x100
[<ffffffff8104a00b>] ? no_context+0xfb/0x260
[<ffffffff81084db2>] ? del_timer_sync+0x22/0x30
[<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0
[<ffffffff81084240>] ? process_timeout+0x0/0x10
[<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20
[<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480
[<ffffffff81065df0>] ? default_wake_function+0x0/0x20
[<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core]
[<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core]
[<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0
[<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0
[<ffffffff8152a815>] ? page_fault+0x25/0x30
[<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm]
[<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm]
[<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm]
[<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm]
[<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib]
[<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib]
[<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib]
[<ffffffff81094d20>] ? worker_thread+0x170/0x2a0
[<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40
[<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0
[<ffffffff8109aef6>] ? kthread+0x96/0xa0
[<ffffffff8100c20a>] ? child_rip+0xa/0x20
[<ffffffff8109ae60>] ? kthread+0x0/0xa0
[<ffffffff8100c200>] ? child_rip+0x0/0x20
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The real QP is destroyed in case of the ref count reaches zero, but
for XRC target QPs this call was missed and caused to QP leaks.
Let's call to destroy for all flows.
Fixes: 0e0ec7e063 ('RDMA/core: Export ib_open_qp() to share XRC...')
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- fix register dumps, stack dumps and stack traces that got torn due to
recent printk changes;
- wire up pkey_{mprotect,alloc,free} syscalls.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYLO6qAAoJEFH5zJH4P6BEEPQP/1y9fJVBws/NFuZhuKzObKTs
rLLE7j9NzipkncQtY2aX0OUwg78vUGPmSs38Hvu31u4JKiEkjouv8PJKlFg1Q3Uf
ZFMXg6ai/2GyQ4jzXPWJ1H4dwFh2iiqH3/Bl7Gx92PKU6whtGd+msR4yWPIa2/y4
kJbFufpsLKcngn9ci0qJ9ULFxVL1KeGYinncgpkKPg+SVCpGVGaxNhcsEpqEsDKr
wRtsuP1RrOmfZ5KQYkAnkeXNeWhiTIbAhgDWVe8QdLC/Us70M+6pZt9spabd724o
qy0fSJPKgbi9T45AuaadOPnzfnkW1/S0rgUw7CoDOge7INm5QWrkKiahUr/q4Xcf
0Mn+f0XpSpPpZzmy7lyDyYUpue5up9llaWtRrO3u1/8n7OXb0PHKEts4gOTuDice
tdt7I2P7EizNpx+4uiiE+nOQg5CUZR8rwFSaeVIG0HMUit8YWEkXDi41+QTqRzXE
tS3SBQJNsSqM9MWrD/+YWLtuS2xyi5HxiQg4JzqC0KeMLFvKk0y1qOrYvPg0J8aY
oUZg53sl+AIzLLV2QvwW9Kc5yqp/b9ht7ebCRdNaZgpa6iD+D+Pb5SMVsiwOfm87
lVxyDaP0JQZWr39Mbug+C1E67gsjDCPRKy07yAr6DS24RwX/yNjD2C1bS5xqj63W
EY6dnoqkbWUV64jubp7f
=AKKC
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20161116' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix register dumps, stack dumps and stack traces that got torn due to
recent printk changes
- wire up pkey_{mprotect,alloc,free} syscalls
* tag 'xtensa-20161116' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: wire up new pkey_{mprotect,alloc,free} syscalls
xtensa: clean up printk usage for boot/crash logging
Commit 7619751f8c ("ARM: 8595/2: apply more __ro_after_init") caused
a regression with XIP kernels by moving the __ro_after_init data into
the read-only section. With XIP kernels, the read-only section is
located in read-only memory from the very beginning.
Work around this by moving the __ro_after_init data back into the .data
section, which will be in RAM, and hence will be writable.
It should be noted that in doing so, this remains writable after init.
Fixes: 7619751f8c ("ARM: 8595/2: apply more __ro_after_init")
Reported-by: Andrea Merello <andrea.merello@gmail.com>
Tested-by: Andrea Merello <andrea.merello@gmail.com> [ XIP stm32 ]
Tested-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Just a few bug fixes for 4.9. The big one is Mario's prime fencing fix.
* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu:fix vpost_needed routine
drm/amdgpu/powerplay: drop a redundant NULL check
drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
This branch include one patch to fix a typo, two patches to disable
vblank interrupt, and three patches to support HDMI 4K resolution.
* 'mediatek-drm-fixes-2016-11-11' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range
drm/mediatek: enhance the HDMI driving current
drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
drm/mediatek: clear IRQ status before enable OVL interrupt
drm/mediatek: set vblank_disable_allowed to true
drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE
Avoid breaking cross-compiled ACPI tools builds by rearranging the
handling of kernel header files.
This patch also contains OUTPUT/srctree cleanups in order to make above fix
working for various build environments.
Fixes: e323c02dee (ACPICA: MSVC9: Fix <sys/stat.h> inclusion order issue)
Reported-and-tested-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This option was added in 6a89a314ab to
allow use of the devm_gpio_* functions without CONFIG_GPIOLIB.
However, only a few months later in
b69ac52449, CONFIG_GPIOLIB was added
as a dependency, defeating the original purpose of this option.
Instead of that patch, the original commit could have just been
reverted (and in fact was partially so in
403c1d0be5). Further, since this
option has a dependency on HAS_IOMEM, even though it does not
require it, it causes build failures when !HAS_IOMEM (e.g. in a
uml build).
Fix that by completely removing the option, in essence completing
the reversion of the original commit.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The nvme_remove function tears down all allocated resources in the correct
order, so no need to free queues on error during initialization. This
fixes possible use-after-free errors when queues are still associated
with a blk-mq hctx.
Reported-by: Scott Bauer <scott.bauer@intel.com>
Tested-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Clock control indirectly requires access to MFC device, so call it only
if we are sure that the device exists in s5p_mfc_release function.
s5p_mfc_remove() calls s5p_mfc_final_pm(), which releases all PM related
resources, including clocks, so any call to clocks related functions
is not valid after s5p_mfc_final_pm().
Fixes: d695c12 ("[media] media: s5p-mfc fix invalid memory access from
s5p_mfc_release()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Newer MFC hardware have internal clock gating feature, so additional
software-triggered clock gating sometimes causes misbehavior of the MFC
firmware and results in freeze or crash. This patch changes the driver
to use software-triggered clock gating only when working with v5 MFC
hardware, where it has been proven to work properly.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, when incomplete frame is received in the middle of
decoding, driver treats it as an error, so src/dst queue and
clock are cleaned. Although it is obviously error case, it is
needed to maintain video decoding in case of necessity. This
patch supports skip incomplete frame to next.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Driver complains about too small scratch buffer size. After adjusting
it according to vendor code, decoding works.
[mszyprow: moved the change to the header file]
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch adds support for Exynos5433 specific version of the GScaler
module. The main difference between Exynos 5433 and earlier is addition
of new clocks that have to be controlled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This driver can be also used on Exynos5433, which is ARM64-based
platform, which selects only ARCH_EXYNOS symbol.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
System PM callbacks only ensure that device is runtime suspended/resumed,
so remove them and use generic pm_runtime_force_suspend/resume helper.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It's not needed to keep a local flag about the current system PM state.
Let's just remove that code and the corresponding debug print.
[mszyprow: rebased onto v4.9-rc4]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
To potentially save more power in runtime PM suspend state, let's
also prepare/unprepare the clock from the runtime PM callbacks.
[mszyprow: rebased onto v4.9-rc4]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
To make sure the clock is fully gated in ->remove(), we first need to
to bring the device into full power by invoking pm_runtime_get_sync().
Then, let's both unprepare and disable the clock.
[mszyprow: rebased onto v4.9-rc4]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
