Merging in 12 patch series from Bart that required changes in the
current for-rc branch in order to apply cleanly.
Signed-off-by: Doug Ledford <dledford@redhat.com>
If IB_CQ_REPORT_MISSED_EVENTS flag is passed in ib_req_notify_cq()
it may return positive value indicating non-empty CQ.
If return code not verified the log might be flooded with false
warning messages "request notify on send CQ failed".
Fixes: 8966e28d2e ("IB/ipoib: Use NAPI in UD/TX flows")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When using enhanced mode for IPoIB, two threads may execute xmit in
parallel to two different TX queues while the target is the same.
In this case, both of them will add the same neighbor to the path's
neigh link list and we might see the following message:
list_add double add: new=ffff88024767a348, prev=ffff88024767a348...
WARNING: lib/list_debug.c:31__list_add_valid+0x4e/0x70
ipoib_start_xmit+0x477/0x680 [ib_ipoib]
dev_hard_start_xmit+0xb9/0x3e0
sch_direct_xmit+0xf9/0x250
__qdisc_run+0x176/0x5d0
__dev_queue_xmit+0x1f5/0xb10
__dev_queue_xmit+0x55/0xb10
Analysis:
Two SKB are scheduled to be transmitted from two cores.
In ipoib_start_xmit, both gets NULL when calling ipoib_neigh_get.
Two calls to neigh_add_path are made. One thread takes the spin-lock
and calls ipoib_neigh_alloc which creates the neigh structure,
then (after the __path_find) the neigh is added to the path's neigh
link list. When the second thread enters the critical section it also
calls ipoib_neigh_alloc but in this case it gets the already allocated
ipoib_neigh structure, which is already linked to the path's neigh
link list and adds it again to the list. Which beside of triggering
the list, it creates a loop in the linked list. This loop leads to
endless loop inside path_rec_completion.
Solution:
Check list_empty(&neigh->list) before adding to the list.
Add a similar fix in "ipoib_multicast.c::ipoib_mcast_send"
Fixes: b63b70d877 ('IPoIB: Use a private hash table for path lookup in xmit path')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Patches for 4.16 that are dependent on patches sent to 4.15-rc.
These are small clean ups for the vmw_pvrdma and i40iw drivers.
* 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git:
RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header
RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t
RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc
RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic
RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file
i40iw: Change accelerated flag to bool
The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B),
contradicts other flows such as ipoib_open possibly causing a deadlock.
To prevent this deadlock heavy flush is called with RTNL locked and
only then tries to acquire vlan_rwsem.
This deadlock is possible only when there are child interfaces.
[ 140.941758] ======================================================
[ 140.946276] WARNING: possible circular locking dependency detected
[ 140.950950] 4.15.0-rc1+ #9 Tainted: G O
[ 140.954797] ------------------------------------------------------
[ 140.959424] kworker/u32:1/146 is trying to acquire lock:
[ 140.963450] (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[ 140.970006]
but task is already holding lock:
[ 140.975141] (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib]
[ 140.982105]
which lock already depends on the new lock.
[ 140.990023]
the existing dependency chain (in reverse order) is:
[ 140.998650]
-> #1 (&priv->vlan_rwsem){++++}:
[ 141.005276] down_read+0x4d/0xb0
[ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib]
[ 141.014400] __dev_open+0xcb/0x140
[ 141.017919] __dev_change_flags+0x1a4/0x1e0
[ 141.022133] dev_change_flags+0x23/0x60
[ 141.025695] devinet_ioctl+0x704/0x7d0
[ 141.029156] sock_do_ioctl+0x20/0x50
[ 141.032526] sock_ioctl+0x221/0x300
[ 141.036079] do_vfs_ioctl+0xa6/0x6d0
[ 141.039656] SyS_ioctl+0x74/0x80
[ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96
[ 141.046891]
-> #0 (rtnl_mutex){+.+.}:
[ 141.051701] lock_acquire+0xd4/0x220
[ 141.055212] __mutex_lock+0x88/0x970
[ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib]
[ 141.067648] process_one_work+0x1f5/0x610
[ 141.071429] worker_thread+0x4a/0x3f0
[ 141.074890] kthread+0x141/0x180
[ 141.078085] ret_from_fork+0x24/0x30
[ 141.081559]
other info that might help us debug this:
[ 141.088967] Possible unsafe locking scenario:
[ 141.094280] CPU0 CPU1
[ 141.097953] ---- ----
[ 141.101640] lock(&priv->vlan_rwsem);
[ 141.104771] lock(rtnl_mutex);
[ 141.109207] lock(&priv->vlan_rwsem);
[ 141.114032] lock(rtnl_mutex);
[ 141.116800]
*** DEADLOCK ***
Fixes: b4b678b06f ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since ib_init_ah_from_path initializes the address handle attribute, it is
renamed to reflect so.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently there are no users of ib_find_gid for RoCE transport. It is
only used by IPoIB.
Therefore its simplified to ignore RoCE ports and GID type check which
was previously done for every port.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In case that the PathRecord is not valid (SM changed its network prefix)
ipoib will continue issue PathQuery requests with the same parameters
that are in its database, which are no longer valid anymore.
Now the driver in that case will re-initialize the record from a valid
place (the priv structure keeps the updated values), and a valid request
will be issued.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ipoib path database is organized around DGIDs from the LLADDR, but the
SA is free to return a different GID when asked for path. This causes a
bug because the SA's modified DGID is copied into the database key, even
though it is no longer the correct lookup key, causing a memory leak and
other malfunctions.
Ensure the database key does not change after the SA query completes.
Demonstration of the bug is as follows
ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it
creates new record in the DB with that gid as a key, and issues a new
request to the SM.
Now, the SM from some reason returns path-record with other SGID (for
example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local
subnet prefix) now ipoib will overwrite the current entry with the new
one, and if new request to the original GID arrives ipoib will not find
it in the DB (was overwritten) and will create new record that in its
turn will also be overwritten by the response from the SM, and so on
till the driver eats all the device memory.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If one port fails to initialize an error message should indicate the
reason and driver should continue serving the working port(s) and other
HCA(s).
Fixes: e4b2d06892 ("IB/ipoib: Remove device when one port fails to init").
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
memalloc_noio_save modifies the behavior of MM, we must restore it after
we are done.
Fixes: d83187dda9 ("IB/IPoIB: Convert IPoIB to memalloc_noio_* calls")
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pr_* is the preferred way to print messages, replace all
printk(KERN_WARN, ...) with pr_warn.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Add iWARP support to qedr driver
- Lots of misc fixes across subsystem
- Multiple update series to hns roce driver
- Multiple update series to hfi1 driver
- Updates to vnic driver
- Add kref to wait struct in cxgb4 driver
- Updates to i40iw driver
- Mellanox shared pull request
- timer_setup changes
- massive cleanup series from Bart Van Assche
- Two series of SRP/SRPT changes from Bart Van Assche
- Core updates from Mellanox
- i40iw updates
- IPoIB updates
- mlx5 updates
- mlx4 updates
- hns updates
- bnxt_re fixes
- PCI write padding support
- Sparse/Smatch/warning cleanups/fixes
- CQ moderation support
- SRQ support in vmw_pvrdma
-----BEGIN PGP SIGNATURE-----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=A1oL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"This is a fairly plain pull request. Lots of driver updates across the
stack, a huge number of static analysis cleanups including a close to
50 patch series from Bart Van Assche, and a number of new features
inside the stack such as general CQ moderation support.
Nothing really stands out, but there might be a few conflicts as you
take things in. In particular, the cleanups touched some of the same
lines as the new timer_setup changes.
Everything in this pull request has been through 0day and at least two
days of linux-next (since Stephen doesn't necessarily flag new
errors/warnings until day2). A few more items (about 30 patches) from
Intel and Mellanox showed up on the list on Tuesday. I've excluded
those from this pull request, and I'm sure some of them qualify as
fixes suitable to send any time, but I still have to review them
fully. If they contain mostly fixes and little or no new development,
then I will probably send them through by the end of the week just to
get them out of the way.
There was a break in my acceptance of patches which coincides with the
computer problems I had, and then when I got things mostly back under
control I had a backlog of patches to process, which I did mostly last
Friday and Monday. So there is a larger number of patches processed in
that timeframe than I was striving for.
Summary:
- Add iWARP support to qedr driver
- Lots of misc fixes across subsystem
- Multiple update series to hns roce driver
- Multiple update series to hfi1 driver
- Updates to vnic driver
- Add kref to wait struct in cxgb4 driver
- Updates to i40iw driver
- Mellanox shared pull request
- timer_setup changes
- massive cleanup series from Bart Van Assche
- Two series of SRP/SRPT changes from Bart Van Assche
- Core updates from Mellanox
- i40iw updates
- IPoIB updates
- mlx5 updates
- mlx4 updates
- hns updates
- bnxt_re fixes
- PCI write padding support
- Sparse/Smatch/warning cleanups/fixes
- CQ moderation support
- SRQ support in vmw_pvrdma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits)
RDMA/core: Rename kernel modify_cq to better describe its usage
IB/mlx5: Add CQ moderation capability to query_device
IB/mlx4: Add CQ moderation capability to query_device
IB/uverbs: Add CQ moderation capability to query_device
IB/mlx5: Exposing modify CQ callback to uverbs layer
IB/mlx4: Exposing modify CQ callback to uverbs layer
IB/uverbs: Allow CQ moderation with modify CQ
iw_cxgb4: atomically flush the qp
iw_cxgb4: only call the cq comp_handler when the cq is armed
iw_cxgb4: Fix possible circular dependency locking warning
RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion
IB/core: Only maintain real QPs in the security lists
IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey
RDMA/core: Make function rdma_copy_addr return void
RDMA/vmw_pvrdma: Add shared receive queue support
RDMA/core: avoid uninitialized variable warning in create_udata
RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs
RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP
RDMA/bnxt_re: Set QP state in case of response completion errors
RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries
...
Current ib_modify_cq() is used to set CQ moderation parameters.
This patch renames ib_modify_cq() to be rdma_set_cq_moderation(),
because the kernel version of RDMA API doesn't need to follow already
exposed to user's API pattern (create_XXX/modify_XXX/query_XXX/destroy_XXX)
and better to have more accurate name which describes the actual usage.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NAPI budget is 64 packets, while maximum polling size for
the send CQ is 16. Let's bring them in sync, so the NAPI
budget will be reused completely.
Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Instead of explicit call to poll_cq of the tx ring, use the NAPI mechanism
to handle the completions of each packet that has been sent to the HW.
The next major changes were taken:
* The driver init completion function in the creation of the send CQ,
that function triggers the napi scheduling.
* The driver uses CQ for RX for both modes UD and CM, and CQ for TX
for CM and UD.
Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The first step toward using NAPI in the UD/TX flow is to separate
between two flows, the NAPI and the xmit, meaning no use of shared
variables between both flows.
This patch takes out the tx_outstanding variable that was used in both
flows and instead the driver uses the 2 cyclic ring variables: tx_head
and tx_tail, tx_head used in the xmit flow and tx_tail in the NAPI flow.
Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
drivers/infiniband/hw/cxgb4/cm.c
drivers/infiniband/hw/qib/qib_driver.c
drivers/infiniband/hw/qib/qib_mad.c
There were minor fixups needed in these files. Just minor context diffs
due to patches from independent sources touching the same basic area.
Signed-off-by: Doug Ledford <dledford@redhat.com>
The early for-next branch was based on v4.14-rc2, while the shared pull
request I got from Mellanox used a v4.14-rc4 base. I'm making the
branch that was the shared Mellanox pull request the new for-next branch
and merging the early for-next branch into it.
Signed-off-by: Doug Ledford <dledford@redhat.com>
To support passing child interfaces to the lower device a new
rdma_netdev function was used, set_id. This will allow us to
attach the PKEY index lower device resources such as TIS/QP.
For devices that do not support offloads in IPoIB same logic
will be used, setting the PKEY index to priv struct.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
When ndo_open and ndo_stop are called RTNL lock should be held.
In this specific case ipoib_ib_dev_open calls the offloaded ndo_open
which re-sets the number of TX queue assuming RTNL lock is held.
Since RTNL lock is not held, RTNL assert will fail.
Signed-off-by: Alex Vesker <valex@mellanox.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Alex Vesker <valex@mellanox.com>
Cc: Erez Shitrit <erezsh@mellanox.com>
Cc: Zhu Yanjun <yanjun.zhu@oracle.com>
Cc: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Yuval Shaia <yuval.shaia@oracle.com>
Cc: linux-rdma@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
commit 9a9b811269 will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.
IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
if (priv->broadcast) {
rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
list_add_tail(&priv->broadcast->list, &remove_list);
priv->broadcast = NULL;
}
...
then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
broadcast = ipoib_mcast_alloc(dev, 0);
...
memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid));
priv->broadcast = broadcast;
...
Fixes: 9a9b811269 ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Call ipoib_remove_one when one of the IPoIB ports fails to initialize in
order not to leave the module in unstable state.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
No reason to have dependency on PCI for the entire infiniband stack so
move it to KConfig of only the drivers that actually using PCI.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Call free_rdma_netdev instead of free_netdev each time we want to
release a netdevice. This call is also relevant for future freeing
of offloaded child interfaces.
This patch also adds a missing call for free netdevice when releasing
a parent interface that has child interfaces using ipoib_remove_one.
Fixes: cd565b4b51 ('IB/IPoIB: Support acceleration options callbacks')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A possible ABBA lock can happen with RTNL and vlan_rwsem.
For example:
Flow A: Device Flush
__ipoib_ib_dev_flush
down_read(vlan_rwsem) // Lock A
ipoib_flush_ah
flush_workqueue(priv->wq) // Wait for completion
A work on shared WQ (Mcast carrier)
ipoib_mcast_carrier_on_task
while (!rtnl_trylock()) // Wait for lock B
Flow B: Sysfs PKEY delete
ipoib_vlan_delete
lock(RTNL) // Lock B
down_write(vlan_rwsem) // Wait for lock A
This can happen with PKEY creates as well. The solution is to release
the RTNL lock in sysfs functions in case it is not possible to lock
VLAN RW semaphore and reset the SYS call.
Fixes: 69956d8326 ("IB/ipoib: Sync between remove_one to sysfs calls that use rtnl_lock")
Signed-off-by: Shalom Lagziel <shaloml@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IPoIB doesn't support transport/rnr retry schemes as per
RFC so those errors are expected. No need to flood the
log files with them.
Tested-by: Michael Nowak <michael.nowak@oracle.com>
Tested-by: Rafael Alejandro Peralez <rafael.peralez@oracle.com>
Tested-by: Liwen Huang <liwen.huang@oracle.com>
Tested-by: Hong Liu <hong.x.liu@oracle.com>
Reviewed-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Reported-by: Rajiv Raja <rajiv.raja@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adds support for ioctl callback in the RDMA netdevs to allow
supporting functions not handled by the generic interface code.
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to avoid deadlock between sysfs functions (like create/delete
child) and remove_one (both of them are using the sysfs lock and
rtnl_lock) the driver will use a state mutex for sync.
That will fix traces as the following:
schedule+0x3e/0x90
kernfs_drain+0x75/0xf0
? wait_woken+0x90/0x90
__kernfs_remove+0x12e/0x1c0
kernfs_remove+0x25/0x40
sysfs_remove_dir+0x57/0x90
kobject_del+0x22/0x60
device_del+0x195/0x230
pm_runtime_set_memalloc_noio+0xac/0xf0
netdev_unregister_kobject+0x71/0x80
rollback_registered_many+0x205/0x2f0
rollback_registered+0x31/0x40
unregister_netdevice_queue+0x58/0xb0
unregister_netdev+0x20/0x30
ipoib_remove_one+0xb7/0x240 [ib_ipoib]
ib_unregister_device+0xbc/0x1b0 [ib_core]
ib_unregister_mad_agent+0x29/0x30 [ib_core]
mlx4_ib_remove+0x67/0x280 [mlx4_ib]
INFO: task echo:24082 blocked for more than 120 seconds.
Tainted: G OE 4.1.12-37.5.1.el6uek.x86_64 #2
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
Call Trace:
schedule+0x3e/0x90
schedule_preempt_disabled+0xe/0x10
__mutex_lock_slowpath+0x95/0x110
? _rcu_barrier+0x177/0x220
mutex_lock+0x23/0x40
rtnl_lock+0x15/0x20
netdev_run_todo+0x81/0x1f0
rtnl_unlock+0xe/0x10
ipoib_vlan_delete+0x12f/0x1c0 [ib_ipoib]
delete_child+0x69/0x80 [ib_ipoib]
dev_attr_store+0x20/0x30
sysfs_kf_write+0x41/0x50
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The functions ib_register_event_handler() and
ib_unregister_event_handler() always returned success and they can't fail.
Let's convert those functions to be void, remove redundant checks and
cleanup tons of goto statements.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging our (hopefully) final -rc pull branch into our for-next branch
because some of our pending patches won't apply cleanly without having
the -rc patches in our tree.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
include/rdma/ib_verbs.h - Modified a function signature adjacent
to a newly added function signature from a previous merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Both add new code
include/rdma/ib_verbs.h - Both add new code
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a need to forward FW version to user space
application through RDMA netlink. In order to make it safe, there
is need to declare nla_policy and limit the size of FW string.
The new define IB_FW_VERSION_NAME_MAX will limit the size of
FW version string. That define was chosen to be equal to
ETHTOOL_FWVERS_LEN, because many drivers anyway are limited
by that value indirectly.
The introduction of this define allows us to remove the string size
from get_fw_str function signature.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
IPoIB contains local_lid field which is 16 bits in
length, increase it to 32 bits.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All modules in drivers/infiniband defined and used MODULE_VERSION, which
was pointless because the kernel version describes their state more accurate
then those arbitrary numbers.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Sagi Grimbrg <sagi@grimberg.me>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Modify QP can fail and it can be acceptable, like when moving from RST to
ERR state, all the rest are not acceptable and a message to the log
should be printed.
The current code prints on all failures and many messages like:
"Failed to modify QP to ERROR state" appear, even when supported by the
state machine of the QP object.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is no need to assign "p" pointer twice.
This patch fixes the following smatch warning:
drivers/infiniband/ulp/ipoib/ipoib_cm.c:517 ipoib_cm_rx_handler() warn:
missing break? reassigning 'p->id'
Fixes: 839fcaba35 ("IPoIB: Connected mode experimental support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Refactor error paths in ipoib_add_port() function. The code flow
ensures that the function terminates on every error flow and it makes
redundant all "else" cases.
The functions are called during the flow are returning "result < 0", in
case of error, so there is no need to check it explicitly.
Fixes: 58e9cc90cd ("IB/IPoIB: Fix bad error flow in ipoib_add_port()")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Update the multicast counter when multicast packets are received and
provide this information through ethtool support.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set IPOIB_NEIGH_TBL_FLUSH bit after initializing the neighbor
flushed completion, otherwise the garbage collector may signal
a completion while it is not initialized yet.
Fixes: b63b70d877 ("IPoIB: Use a private hash table for path lookup in xmit path")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Don't allow negative values to max_nonsrq_conn_qp. There is no functional
impact on a negative value but it is logicically incorrect.
Fixes: 68e995a295 ("IPoIB/cm: Add connected mode support for devices without SRQs")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
While cleaning neighs and there is a send-only mcast neigh, the driver
should wait to finish its join process before trying to remove it.
Without this patch, we will see messages like: "ipoib_mcast_leave on an
in-flight join" and unexpected results in the join_complete.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The work mcast_task can re-queue itself, so instead of doing
cancel && flush_workqueue, that still can leave a queued task
on the air, use cancel_delayed_work_sync.
Also, no need to use lock over the cancel, the original lock was
due to bit assignment setting (IPOIB_MCAST_RUN) that is not in use
anymore.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A potential race between light_event and interface restart
may attach multicast group to an already attached QP.
Scenario:
light_event flow goes through ipoib_mcast_dev_flush function,
if a context switch occurs before calling ipoib_mcast_remove_list,
then we may face a situation where the broadcast of the priv is null
and the corresponding QP is not detached yet.
If an "interface restart" runs during the previous context switch,
the following scenario occurs:
When the device goes up, ipoib_ib_dev_up function will be called,
it will send a new registration request to the broadcast group and then
attach the group to the QP that was not detached before.
IPOIB_FLUSH_LIGHT INTERFACE RESTART
__ipoib_ib_dev_flush |
| |
| |
| |
ipoib_mcast_dev_flush |
Move mcast list and broadcast to remove_list |
| |
| |
Context Switch--> |
| ipoib_ib_dev_down
| |
| |
| ipoib_ib_dev_up
| |
| |
| ipoib_mcast_join_task
| allocate new broadcast
| |
| |
| Attach QP to multicast group
| |
| |
| <--Context Switch
ipoib_mcast_leave
Detach QP from multicast group
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
We accidentally don't see the error code on some of these error paths.
It means we return ERR_PTR(0) which is NULL and it results in a NULL
dereference in the caller.
This bug dates to pre-git days.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver checks if the lower level driver supports get_stats, and if
so calls it to get the updated statistics, otherwise takes from the
current netdevice stats object.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Commit 21caf2fc19 ("mm: teach mm by current context info to not do I/O
during memory allocation") added the memalloc_noio_(save|restore) functions
to enable people to modify the MM behavior by disabling I/O during memory
allocation. This was further extended in Fixes: 934f3072c1 ("mm: clear
__GFP_FS when PF_MEMALLOC_NOIO is set"). memalloc_noio_* functions prevent
allocation paths recursing back into the filesystem without explicitly
changing the flags for every allocation site.
However the IPoIB hasn't been keeping up with the changes and missed
completely these memalloc_noio_* calls. This led to update of
allocation site with special QP creation flag, see commit 09b93088d7
("IB: Add a QP creation flag to use GFP_NOIO allocations"), while this
flag is supported by small number of drivers in IB stack.
Let's change it by updating to memalloc_noio_* calls and allow
for every driver underneath enjoy NOIO allocations.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch checks if there is a driver below that
needs to be updated on the new MTU and calls it
accordingly.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The msleep(1) may do not sleep 1 ms as expected
and will sleep longer. The simple conversion from
msleep to usleep_range between 1ms and 2ms can solve an
issue.
The full and comprehensive explanation can be found at [1] and [2].
[1] https://lkml.org/lkml/2007/8/3/250
[2] Documentation/timers/timers-howto.txt
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- 2 Fixes for OPA found by debug kernel
- 1 Fix for user supplied input causing kernel problems
- 1 Fix for the IPoIB fixes submitted around -rc4
-----BEGIN PGP SIGNATURE-----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=JEor
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma update from Doug Ledford:
"This includes two bugs against the newly added opa vnic that were
found by turning on the debug kernel options:
- sleeping while holding a lock, so a one line fix where they
switched it from GFP_KERNEL allocation to a GFP_ATOMIC allocation
- a case where they had an isolated caller of their code that could
call them in an atomic context so they had to switch their use of a
mutex to a spinlock to be safe, so this was considerably more lines
of diff because all uses of that lock had to be switched
In addition, the bug that was discussed with you already about an out
of bounds array access in ib_uverbs_modify_qp and ib_uverbs_create_ah
and is only seven lines of diff.
And finally, one fix to an earlier fix in the -rc cycle that broke
hfi1 and qib in regards to IPoIB (this one is, unfortunately, larger
than I would like for a -rc7 submission, but fixing the problem
required that we not treat all devices as though they had allocated a
netdev universally because it isn't true, and it took 70 lines of diff
to resolve the issue, but the final patch has been vetted by Intel and
Mellanox and they've both given their approval to the fix).
Summary:
- Two fixes for OPA found by debug kernel
- Fix for user supplied input causing kernel problems
- Fix for the IPoIB fixes submitted around -rc4"
[ Doug sent this having not noticed the 4.12 release, so I guess I'll be
getting another rdma pull request with the actuakl merge window
updates and not just fixes.
Oh well - it would have been nice if this small update had been the
merge window one. - Linus ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/core, opa_vnic, hfi1, mlx5: Properly free rdma_netdev
RDMA/uverbs: Check port number supplied by user verbs cmds
IB/opa_vnic: Use spinlock instead of mutex for stats_lock
IB/opa_vnic: Use GFP_ATOMIC while sending trap
IPOIB is calling free_rdma_netdev even though alloc_rdma_netdev has
returned -EOPNOTSUPP.
Move free_rdma_netdev from ib_device structure to rdma_netdev structure
thus ensuring proper cleanup function is called for the rdma net device.
Fix the following trace:
ib0: Failed to modify QP to ERROR state
BUG: unable to handle kernel paging request at 0000000000001d20
IP: hfi1_vnic_free_rn+0x26/0xb0 [hfi1]
Call Trace:
ipoib_remove_one+0xbe/0x160 [ib_ipoib]
ib_unregister_device+0xd0/0x170 [ib_core]
rvt_unregister_device+0x29/0x90 [rdmavt]
hfi1_unregister_ib_device+0x1a/0x100 [hfi1]
remove_one+0x4b/0x220 [hfi1]
pci_device_remove+0x39/0xc0
device_release_driver_internal+0x141/0x200
driver_detach+0x3f/0x80
bus_remove_driver+0x55/0xd0
driver_unregister+0x2c/0x50
pci_unregister_driver+0x2a/0xa0
hfi1_mod_cleanup+0x10/0xf65 [hfi1]
SyS_delete_module+0x171/0x250
do_syscall_64+0x67/0x150
entry_SYSCALL64_slow_path+0x25/0x25
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support for extended error reporting.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for extended error reporting.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two entries being added at the same time to the IFLA
policy table, whilst parallel bug fixes to decnet
routing dst handling overlapping with the dst gc removal
in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
@@
expression SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- fn(SKB, LEN)[0]
+ *(u8 *)fn(SKB, LEN)
Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The flow of creating a new child goes through ipoib_vlan_add
which allocates a new interface and checks the rtnl_lock.
If the lock is taken, restart_syscall will be called to restart
the system call again. In this case we are not releasing the
already allocated interface, causing a leak.
Fixes: 9baa0b0364 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch mekas init_default and uninit_default symmetric
with a call to delete napi. Additionally, the uninit_default
gained delete napi call in case of init_default fails.
Fixes: 515ed4f3aa ('IB/IPoIB: Separate control and data related initializations')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a need to free priv explicitly and not just to release
the device, child priv is freed explicitly on remove flow and this
patch also includes priv free on error flow in P_key creation
and also in add_port.
Fixes: cd565b4b51 ('IB/IPoIB: Support acceleration options callbacks')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
ipoib_dev_uninit_default() call is used in ipoib_main.c file only
and it generates the following warning from smatch tool:
drivers/infiniband/ulp/ipoib/ipoib_main.c:1593:6: warning:
symbol 'ipoib_dev_uninit_default' was not declared. Should it
be static?
so let's declare that function as static.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to let the bonding driver report the correct speed
of the underlaying interfaces, when they are IPoIB, the ethtool
function get_link_ksettings() in the IPoIB driver is implemented.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Suggested-by: Håkon Bugge <Haakon.Bugge@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the bit 26 of capmask2 field in OPA classport info
query is set, SA will query for OPA path records instead
of querying for IB path records. Note that OPA
path records can only be queried by kernel ULPs.
Userspace clients continue to query IB path records.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add opa_sa_path_rec to sa_path_rec data structure.
The 'type' field in sa_path_rec identifies the
type of the path record.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
sa_path_rec now contains a union of sa_path_rec_ib and sa_path_rec_roce
based on the type of the path record. Note that fields applicable to
path record type ROCE v1 and ROCE v2 fall under sa_path_rec_roce.
Accessor functions are added to these fields so the caller doesn't have
to know the type.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_sa_path_rec to a more generic sa_path_rec.
This is part of extending ib_sa to also support OPA
path records in addition to the IB defined path records.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdma_ah_attr can now be either ib or roce allowing
core components to use one type or the other and also
to define attributes unique to a specific type. struct
ib_ah is also initialized with the type when its first
created. This ensures that calls such as modify_ah
dont modify the type of the address handle attribute.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_destroy_ah to rdma_destroy_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_create_ah to rdma_create_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch fixes a checkpatch issue related to not having
to use an 'else' if the 'if' path returns from the function.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
SA will query and cache class port info as part of
its initialization. SA will also invalidate and
refresh the cache based on specific events. Callers such
as IPoIB and CM can query the SA to get the classportinfo
information. Apart from making the caller code much simpler,
this change puts the onus on the SA to query and maintain
classportinfo much like how it maitains the address handle to the SM.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before calling ipoib_stop, rtnl_lock should be taken, then
the flow clears the IPOIB_FLAG_ADMIN_UP and IPOIB_FLAG_OPER_UP
flags, and waits for mcast completion if IPOIB_MCAST_FLAG_BUSY
is set.
On the other hand, the flow of multicast join task initializes
a mcast completion, sets the IPOIB_MCAST_FLAG_BUSY and calls
ipoib_mcast_join. If IPOIB_FLAG_OPER_UP flag is not set, this
call returns EINVAL without setting the mcast completion and
leads to a deadlock.
ipoib_stop |
| |
clear_bit(IPOIB_FLAG_ADMIN_UP) |
| |
Context Switch |
| ipoib_mcast_join_task
| |
| spin_lock_irq(lock)
| |
| init_completion(mcast)
| |
| set_bit(IPOIB_MCAST_FLAG_BUSY)
| |
| Context Switch
| |
clear_bit(IPOIB_FLAG_OPER_UP) |
| |
spin_lock_irqsave(lock) |
| |
Context Switch |
| ipoib_mcast_join
| return (-EINVAL)
| |
| spin_unlock_irq(lock)
| |
| Context Switch
| |
ipoib_mcast_dev_flush |
wait_for_completion(mcast) |
ipoib_stop will wait for mcast completion for ever, and will
not release the rtnl_lock. As a result panic occurs with the
following trace:
[13441.639268] Call Trace:
[13441.640150] [<ffffffff8168b579>] schedule+0x29/0x70
[13441.641038] [<ffffffff81688fc9>] schedule_timeout+0x239/0x2d0
[13441.641914] [<ffffffff810bc017>] ? complete+0x47/0x50
[13441.642765] [<ffffffff810a690d>] ? flush_workqueue_prep_pwqs+0x16d/0x200
[13441.643580] [<ffffffff8168b956>] wait_for_completion+0x116/0x170
[13441.644434] [<ffffffff810c4ec0>] ? wake_up_state+0x20/0x20
[13441.645293] [<ffffffffa05af170>] ipoib_mcast_dev_flush+0x150/0x190 [ib_ipoib]
[13441.646159] [<ffffffffa05ac967>] ipoib_ib_dev_down+0x37/0x60 [ib_ipoib]
[13441.647013] [<ffffffffa05a4805>] ipoib_stop+0x75/0x150 [ib_ipoib]
Fixes: 08bc327629 ("IB/ipoib: fix for rare multicast join race condition")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the broadcast address in the priv->broadcast object when the
Pkey value changes in index 0, otherwise the multicast GID value will
keep the previous value of the PKey, and will not be updated.
This leads to interface state down because the interface will keep the
old PKey value.
For example, in SR-IOV environment, if the PF changes the value of PKey
index 0 for one of the VFs, then the VF receives PKey change event that
triggers heavy flush. This flush calls update_parent_pkey that update the
broadcast object and its relevant members. If in this case the multicast
GID will not be updated, the interface state will be down.
Fixes: c290414169 ("IPoIB: Fix pkey change flow for virtualization environments")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IPoIB driver now uses the new set of callback functions.
If the hardware provider supports the new ipoib_options implementation,
the driver uses the callbacks in its data path flows, otherwise it uses the
driver default implementation for all data flows in its code.
The default implementation wasn't change and it is exactly as it was before
introduction of acceleration support.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Make ipoib_priv point to netdev_priv where the code calls netdev_priv.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change of function parameter name from qpn to be dqpn.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch is preparing the netdev part at the IPoIB driver to be able
to use the ipoib_options.
It deals with the two flows from the .ndo: ipoib_open and ipoib_stop.
The code is rearranged as follows:
* All operations which deal with the hardware resources, (for example
change QP state, post-receive etc.) are performed in one place.
* All operations that are control oriented (like restart multicast task,
start the reap_ah etc.) are performed in separate place.
The functions that deal with the hardware resources now located at
__ipoib_ib_dev_open for the ipoib_open flow and __ipoib_ib_dev_stop
for ipoib_stop.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch prepares init and teardown flows so we can call them
through ipoib_options function pointers.
It arranges that area of code as the following:
* All operations which deal with the resource allocation/deletion
are performed in one place.
* All operations that are control oriented, meaning that they are not
connected to a specific hardware, are performed in a separate place.
The operations for allocation of hardware resources are now in the
function ipoib_dev_init_default, and the deletion of all the resources
are in ipoib_dev_uninit_default
The only exception is the creation of the PD object,
which is used both for resource allocation (create QP etc.)
and for control flows like creating AH.
It also does:
* Move creation of rx_ring and tx_ring to be in the resources
allocation area.
* Move the function ipoib_ib_dev_open that does the open device
to the control area instead of the dev_init which creates resources.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When udev renames the netdev devices, ipoib debugfs entries does not
get renamed. As a result, if subsequent probe of ipoib device reuse the
name then creating a debugfs entry for the new device would fail.
Also, moved ipoib_create_debug_files and ipoib_delete_debug_files as part
of ipoib event handling in order to avoid any race condition between these.
Fixes: 1732b0ef3b ([IPoIB] add path record information in debugfs)
Cc: stable@vger.kernel.org # 2.6.15+
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes
it was possible to remove the IB DMA mapping code entirely and
switch the RDMA stack to use the core DMA mapping code. This resulted
in a nice set of cleanups, but touched the entire tree. This branch
will be submitted separately to Linus at the end of the merge window
as per normal practice for tree wide changes like this.
-----BEGIN PGP SIGNATURE-----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=e0Si
-----END PGP SIGNATURE-----
Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
There are 2 labels to mark the same statements. Replace the 2 labels
with one versatile labe.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the function ipoib_cm_nonsrq_init_rx, the memory is not
allocated successfully. It is not necessary to free it.
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When sending packet to destination that was not resolved yet
via path query, the driver keeps the skb and tries to re-send it
again when the path is resolved.
But when re-sending via dev_queue_xmit the kernel doesn't call
to dev_hard_header, so IPoIB needs to keep 20 bytes in the skb
and to put the destination address inside them.
In that way the dev_start_xmit will have the correct destination,
and the driver won't take the destination from the skb->data, while
nothing exists there, which causes to packet be be dropped.
The test flow is:
1. Run the SM on remote node,
2. Restart the driver.
4. Ping some destination,
3. Observe that first ICMP request will be dropped.
Fixes: fc791b6335 ("IB/ipoib: move back IB LL address into the hard header")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The function ipoib_mcast_start_thread/ipoib_ib_dev_up always return zero.
As such, in the function ipoib_open, err_stop will never be reached.
So remove this err_stop and change the return type of the function
ipoib_mcast_start_thread/ipoib_ib_dev_up to void.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ipoib_ib_dev_down/ipoib_ib_dev_stop return zero unconditionally
and the callers never check the returned values,
change the return type to void and remove the redundant return values.
Reviewed-by: Shan Hai <shan.hai@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the function ipoib_set_dev_features, the returned value is always 0.
As such, it is not necessary to check the returned value.
This is not a bug. It is a trivial problem.
Reviewed-by: Guanglei Li <guanglei.li@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Prepare for removal of ib_device.dma_device.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function
belong to different work queues, they can run in parallel.
In this case if ipoib_cm_tx_reap calls list_del and release the
lock, ipoib_cm_tx_start may acquire it and call list_del_init
on the already deleted object.
Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem.
Fixes: 839fcaba35 ("IPoIB: Connected mode experimental support")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to resolve a situation where a few process delete
the same list element in sequence and cause panic, list_del
is replaced with list_del_init. In this case if the first
process that calls list_del releases the lock before acquiring
it again, other processes who can acquire the lock will call
list_del_init.
Fixes: b63b70d877 ("IPoIB: Use a private hash table for path lookup")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
