Select CONFIG_CLK_IMX8MP by default to support i.MX8MP clock driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The high frequency pll is required on compatible Qualcomm SoCs to
support the CPU frequency scaling feature.
Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-6-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Both the i.MX8MQ and i.MX8M Mini support the CAAM driver, but it
is currently not enabled by default.
This patch enables this as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ath10k snoc is found on the Qualcomm QCS404 and SDM845, so enable
the driver for this.
Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191028171837.3907550-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable PDC interrupt controller for SDM845 devices. The interrupt
controller can detect wakeup capable interrupts when the SoC is in a low
power state.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-13-git-send-email-ilina@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the driver for the watchdog found in the application processor
subsystem on most modern Qualcomm platforms.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Most Qualcomm platforms contain a pseudo random number generator
hardware block. Enable the driver for this block and also enable the
interface for exposing this to userspace.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables display on the Lenovo Yoga C630 by connecting the DSI output
from the SoC to the eDP input of the panel.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables Bluetooth on the Lenovo Yoga C630.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm CPUfreq HW provides CPU voltage and frequency scaling on
many modern Qualcomm SoCs. Enable the driver for this hardware block to
enable this functionality on the SDM845 platform.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm socinfo driver provides SoC information to userspace using
the standard soc interface as well as a number of debugfs entries.
Enable this to allow certain user space tools to acquire this
information, as well as getting developers access to the information in
debugfs that is useful when reporting bugs.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the drivers for GENI SPI and QSPI controllers found on the
Qualcomm SDM845 platform, among others.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the the power domains, reset controllers and remote block device
memory access drivers necessary to boot the Audio, Compute and Modem
DSPs on Qualcomm SDM845.
None of the power domains are system critical, but needs to be builtin
as the driver core prohibits probe deferal past late initcall.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Alex Elder <elder@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/20191205211438.27552-3-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=rTWJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: shmobile: defconfig: Refresh for v5.4-rc1
arm64: defconfig: Enable R8A77961 SoC
ARM: configs: sunxi: Enable MICREL_PHY
arm64: defconfig: add new Allwinner crypto options
ARM: configs: sunxi: add new Allwinner crypto options
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
arm64: defconfig: enable Altera GPIO controller
ARM: multi_v7_defconfig: Enable audio support for stm32mp157
arm64: defconfig: enable rsu driver
...
The recently introduced Energy Model (EM) framework manages power cost
tables for the CPUs of the system. Its only user right now is the
scheduler, in the context of Energy Aware Scheduling (EAS).
However, the EM framework also offers a generic infrastructure that
could replace subsystem-specific implementations of the same concepts,
as this is the case in the thermal framework.
So, in order to prepare the migration of the thermal subsystem to use
the EM framework, enable it in the default arm64 defconfig, which is the
most commonly used architecture for IPA. This will also compile-in all
of the EAS code, although it won't be enabled by default -- EAS requires
to use the 'schedutil' CPUFreq governor while arm64 defaults to
'performance'.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191030151451.7961-2-qperret@google.com
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdwYuhAAoJEFBXWFqHsHzO+tcH/RmEkt5uueRqM++I56F7Kmc9
80I2pMUbCXln2rjWXEP29OE1h4pKtimfwtEoQvtRX8DOhCFT+CCxsj9JqMZAEnxp
WrCC6GbNAYG+Geje6HAVy7mr2mFD4KXwcc/TLjV2fk3MpuEcsYLuEL/t+wqnKw/W
IabyG0v/CZfp1fkX5FIkpmI770WzOs5kzfIGTnJ9GEJtj/omZYPXK605GSDSWovJ
XX2iI2wFmLy8/KO9enhGQjSzZQyOZce/cyqCG4YGdWSHQzJE9zBP207EHZqEB21b
g+5VzYbM75WmAt0TL+2K3ZzuOKVKZeDpY6KQTz02rTfIRZ4sieY6l9+i/ECtAgY=
=w4CK
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.5:
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default
Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Enable support for the new R-Car M3-W+ (r8a77961) SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbxC8QAKCRCKwlD9ZEnx
cEbwAP0QFuUSw6DqGAW7KAXw9hw9wyflLV980BiAhLithcUc+gD9FfWapC+c4Bga
1uiVND6X3kqUxHUcbc27P7xvziOYPgQ=
=CPFd
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM64 defconfig updates for v5.5 (take two)
- Enable support for the new R-Car M3-W+ (r8a77961) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A77961 SoC
Link: https://lore.kernel.org/r/20191101155842.31467-4-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
Kunpeng920 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJduVY1AAoJEAvIV27ZiWZcwxYP/R16mFC9+mOGCO0TaZfkxzV5
cj4ofxhwNi3B3VK+HBDOCOEixh0fovyGihZCAE4X46UAo0ZuSzn/EMnIaV4caidT
mRma+6NYUNfHtvNdvDSM6wp+dyWR4mIOKAivKvq0ItY5tiRWnZnHCdHIJGj9yCXs
e9fax9ocuq6cLJ6ZKtVFxiUtG9/Z8I3gk0N869uN6ZMr2opa9fzi3AN+Amf/a9qX
upcWVp8xIiwBTvn4ZCiTc1LOBeKWAsbK4XbVCB5lTGIA9SaDjR0N7nwHVWq7etBG
t1LAD2HKpfL35kmNxr3uIhdR5P0no9BpQiDB8ykOO4JcEtPIsZMSIwibXG5JVUl2
XEBXkdkSeBb6nWGKDxtmfQRE9jwrpvLB+MA/cxQvC9fi+bIRVP1cvqGYMbJrlVLI
BTAjiZz7Uiy0FOD9FKfo/aOmJsHbFjXz1PPUbJjy3zXiAMsr/nuA1aoeGwBZMSTi
E0AyvMqgWsGOSOYgZi/6XKjGJHAdM5N/eoSRtTaSAZk5zKAi4N3uZ2VV5ggE0dQl
9pjFpkV2v87xP6Yu6CXD5kmsvIgUTTr78V2eVn/Mcvt2kEuUj4l2JSxjiFc2CdDf
xpRPF5fzOL+AyyV74EwAMIgI/QfRerZ4xJWYiEh74ecd4bcQqXr8L+UYZLaPDHkL
BCXGhps1Ukoa5txGV10Q
=h4j2
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi into arm/defconfig
ARM64: hisilicon: defconfig updates for 5.5
- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
Kunpeng920 SoC
* tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
Link: https://lore.kernel.org/r/5DB95B1E.8060607@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver
-----BEGIN PGP SIGNATURE-----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=mZHb
-----END PGP SIGNATURE-----
Merge tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/defconfig
arm64 defconfig for v5.5
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver
* tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: defconfig: enable Altera GPIO controller
arm64: defconfig: enable rsu driver
arm64: defconfig: enable the Cadence QSPI controller
Link: https://lore.kernel.org/r/20191029143737.24850-2-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds the new allwinner crypto configs to ARM64 defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Select CONFIG_KEYBOARD_IMX_SC_KEY as module by default to
support i.MX8QXP scu key driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
HiSilicon Kunpeng920 SoC's SMMU has Performance Monitor Counter Groups(PMCG).
This patch enables related driver in defconfig.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable CONFIG_CRYPTO_DEV_HISI_ZIP for HiSilicon ZIP controller in Kunpeng920
SoC.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable Intel Stratix10 Remote System Update (RSU) driver
The Intel Remote System Update (RSU) driver provides a way for customers
to update the boot configuration of a Intel Stratix 10 SoC device with
significantly reduced risk of corrupting the bitstream storage and
bricking the system.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- Enable support for the new RZ/G2N (r8a774b1) SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXal+LwAKCRCKwlD9ZEnx
cBOWAQCxnwQPhFyyuJDpNQMg7P3/mPXoX7Pis5B4VGaAtNFaJQD/WhsTJJ/SPtZQ
IfadPuQOobigRXq69TVpuV/4UYq+aQ4=
=XV8+
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM64 defconfig updates for v5.5
- Enable support for the new RZ/G2N (r8a774b1) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A774B1 SoC
Link: https://lore.kernel.org/r/20191018101136.26350-3-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Since there are enough consumers (drivers) for Actions Semi platform in
mainline, let's enable it in ARM64 defconfig. As of now, this platform
can boot a distro from eMMC/uSD.
Link: https://lore.kernel.org/r/20191015152204.5610-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 6334150e9a ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhibits all defconfigs marking CONFIG_REMOTEPROC as
a module in compiling the remoteproc and dependent config options.
So fix the configs to have CONFIG_REMOTEPROC built in.
Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com
Fixes: 6334150e9a ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Will Deacon <will@kernel.org>
[olof: Fixed up all 4 occurrances in this one commit]
Signed-off-by: Olof Johansson <olof@lixom.net>
Tested on the Lenovo Yoga C630 where this patch enables USB.
Without it USB devices are not enumerated.
Link: https://lore.kernel.org/r/20190903192625.14775-3-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested on the Lenovo Yoga C630 where this patch enables the
framebuffer (screen/monitor). Without it the device appears
not to boot.
Link: https://lore.kernel.org/r/20190903192625.14775-2-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested on the Lenovo Yoga C630 where this patch enables the
keyboard, touchpad and touchscreen.
Link: https://lore.kernel.org/r/20190903192625.14775-1-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file
-----BEGIN PGP SIGNATURE-----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=brp0
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig updates
for 5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file
* tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: enable cpufreq support for RPi3
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYqWeAAoJEFBXWFqHsHzO8h8H+wTFJx+q4CF7Z8l+3OCR5rNQ
RSC3gaiYLhQUCEx+HVnvzDvhovdJNyoHiT6qdYqHIO5BYMmacsuWYwuZveaSePCl
WYZ0XkIuvMDZu4KFkl3ufEZx73u/7hbY1s4PevWm7KDeHY28XyWfflX0aW2yM/2Q
1Q/bNjMnsFGJPItBModiwS9lNjxMl7K9XBU47m0K/sJV4LFxbl+2OmfmaQYn4Ook
PAa4XbRH3d/Ff+jXrbwSy+AZZfpsiwDPV6cEwaAOTGr0O6+jKGRzqyAYNTANwjfU
ihUhy/XBjX2GRmGVxqTthDgktoSfX9eVQFU4WfDiHjRYO3y6vpBccC1ixpawUEM=
=iYpD
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.4:
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: CONFIG_DRM_ETNAVIV=m
ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver
arm64: defconfig: Build imx8 ddr pmu as module
arm64: defconfig: Select CONFIG_CLK_IMX8MN by default
arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default
arm64: defconfig: Enable SDMA on i.mx8mq/8mm
Link: https://lore.kernel.org/r/20190825153237.28829-7-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two patches to enable the IR receiver and the SPDIF transceiver found on
the Allwinner SoCs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/4nQAKCRDj7w1vZxhR
xdi9AQC1om2jja54gplSpDKxYzPsAphLlmSNzKKQ5+mzjj1J3gD/VNdkUyw/V2Pk
g/DAuPRgpZWS1ab82Lr08z6RDeFynwk=
=R83T
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Allwinner arm64 defconfig changes for 5.4
Two patches to enable the IR receiver and the SPDIF transceiver found on
the Allwinner SoCs.
* tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable Sun4i SPDIF module
arm64: defconfig: Enable IR SUNXI option
Link: https://lore.kernel.org/r/24f215ca-f3a8-4497-bf98-9ba1808b37be.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 used to be enabled by default in
drivers/clk/qcom/Kconfig. A recent patch changed that by dropping the
'default ARCH_QCOM' directive.
Add the two options explicitly in the arm64 defconfig, to avoid
functional regressions.
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[bjorn: Rewrote subject]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.
I split this off from the original patch to separate out the ARM64 portions.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Enable GCC config CONFIG_SM_GCC_8150 and pinctrl config
CONFIG_PINCTRL_SM8150 to make it possible to boot the SM8150 MTP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the ACPI_APEI_PCIEAER configuration to support PCIe AER error report
for the Hisilicon D06 board and the dependencies PCIEAER and ACPI_APEI have
been enabled in the default config.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable the PSCI CPUidle driver to replace the functionality
previously provided by the generic ARM CPUidle driver through
CPU operations.
Link: https://lore.kernel.org/r/20190814125239.6270-2-lorenzo.pieralisi@arm.com
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner A64 and H6 use the Sun4i SPDIF driver.
Enable this to allow a proper support.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
For imx8 we want to enable etnaviv, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_IR_SUNXI option for ARM64, so that Allwinner A64/H6 SoCs
can use their IR receiver controller.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This enables both the new firmware clock driver and cpufreq driver
available for the RPi3 family of boards.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
This is available on all imx8 but is not "boot critical" in any way so
build as a module.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable SDMA support on i.mx8mq/8mm chips, including enabling
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
for firmware loaded by udev.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl0yUy8PHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3xMsP+wawhEwoH9kgFkzs4OHVw66BHULejrtYF92Q
piOiLhqHgtLnDjz7oV9e3LNUDfsAutPOscDlYzmEU+v4qhisxF66jnmPzv7ppByJ
c4WJkj38TYo1qyZ3SD/9UY9jHQFZyDj3qeeS6LJdSJVMIf7fL/XsjPFeF3QCrA6w
tabVAgFnx49QD1ucCXedbpBFVpRD+TP2nRSwkVGVDHJ5NKl2z6Pi55hNdWsSpJ/E
Smn02vZolfVrbzvWn+3p+SETSOcwNN0F5DWEbDmlwIrMNhtaV8V91Z1vwB7Zu4pq
khLw8hLpYX9cPnqVHu8aUChu5gAOc7UKU52an9qcguznTp2kvTsaBDPRW/hA8hsr
s6sBL0FmNfVesaGw10zLTYfLbfO1Osq3/8dP3u5kJHfhb4veINy09sjSL76On04c
DuljTQvURH5lXAbt3J4GRnN/x8yZ+LNoT3htElo+59TmR/QOBjQXP0oOPXRVyrDQ
+oHdFuw3LjU9ZxUiTkvqaQag217SFpbuUdMR7RO/dtKlwpAnuofWXy+zDFQ1UcxU
+p7asIo+3Nwiea8MQeB4+XArW20lpTEJUs3GVrqQvCOfmzttS9q842gTPDex8id2
b4VER5MJLV2EQ9JKU1cfMd5IVak9fbnIIgh5tD/UzVVP/s+RwdJQgMeT/RqoCrZc
PTMbqCVX
=Ysfd
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: configs: multi_v5: Remove duplicate ASPEED options
arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module
ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT
defconfig: arm64: enable i.MX8 SCU octop driver
arm64: defconfig: Add i.MX SCU SoC info driver
arm64: defconfig: Enable CONFIG_QORIQ_THERMAL
ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR
arm64: defconfig: ARM_IMX_CPUFREQ_DT=m
ARM: imx_v6_v7_defconfig: Add TPM PWM support by default
ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver
ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS
arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m
ARM: multi_v7_defconfig: enable STMFX pinctrl support
arm64 defconfig: enable LVM support
ARM: configs: multi_v5: Add more ASPEED devices
arm64: defconfig: Add Tegra194 PCIe driver
ARM: configs: aspeed: Add new drivers
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
arm64 defconfig: enable Mellanox cards
...
We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM Mali
GPU devices added to device trees, since the DRM drivers have now been
merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Polish and fixes for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now at
feature parity with TX1
-----BEGIN PGP SIGNATURE-----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=sHZs
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM
Mali GPU devices added to device trees, since the DRM drivers have now
been merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Fixes and polish for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now
at feature parity with TX1"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
ARM: dts: gemini: Set DIR-685 SPI CS as active low
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
ARM: dts: exynos: Move Mali400 GPU node to "/soc"
ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
ARM: dts: rockchip: add display nodes for rk322x
ARM: dts: rockchip: fix vop iommu-cells on rk322x
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
arm64: dts: qcom: sdm845-cheza: add initial cheza dt
ARM: dts: msm8974-FP2: Add vibration motor
...
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
-----BEGIN PGP SIGNATURE-----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=0TDT
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
some missing drivers for the Allwinner A64.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRtgAKCRDj7w1vZxhR
xYEkAQDDG93lpzjFJBx9bs62SDRD6CRWFgQFbB3Nhp3u7xeCXwD/d1A89oINxhx8
Fw+Iwzzdix1/wrCGZUohZ2ryQCGyYwo=
=eg7B
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.3-201906210813' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Our usual bunch of arm64 defconfig changes, this time mostly to enable
some missing drivers for the Allwinner A64.
* tag 'sunxi-config64-for-5.3-201906210813' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: enable Allwinner DMA drivers
arm64: defconfig: enable sunxi watchdog
arm64: defconfig: add allwinner sid support
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module to support i.MX8M
series SoCs' power key.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch selects CONFIG_IMX_SCU_SOC by default to support
i.MX system controller unit SoC info driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For imx8m we need a separate small driver to read "speed grading"
information from fuses and determine which OPPs are supported.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable imx-ocotp nvmem driver for fuse access on imx8m family.
The fuse block stores various system information which will be accessed
by client device drivers, e.g. cpufreq driver needs to access fuse for
CPU speed grading setting. So this nvmem driver gets enabled as
built-in.
Tested on imx8mm-evk.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables the INA3221 power monitoring driver that is used on many of
the Jetson boards as well as Tegra194 PCIe support.
-----BEGIN PGP SIGNATURE-----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=NJQ7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.3-rc1
This enables the INA3221 power monitoring driver that is used on many of
the Jetson boards as well as Tegra194 PCIe support.
* tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Add Tegra194 PCIe driver
arm64: defconfig: Add HWMON INA3221 support
Signed-off-by: Olof Johansson <olof@lixom.net>
W dniu 19.06.2019 o 16:21, Olof Johansson pisze:
> On Mon, Jun 17, 2019 at 06:04:09PM +0200, Marcin Juszkiewicz wrote:
>> Follow x86-64 defconfig on enabling basic LVM support.
>>
>> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
>
> Do you need this to be =y? If you use LVM, you usually boot with a ramdisk that
> will hold modules.
Right. Forgot to change.
From 63003d0047062949a1231f67e1efdcb96b54323a Mon Sep 17 00:00:00 2001
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Date: Mon, 27 May 2019 20:14:34 +0200
Subject: [PATCH 1/3] arm64 defconfig: enable LVM support
Follow x86-64 defconfig on enabling basic LVM support.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Mellanox cards are present in several AArch64 servers.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of arm64 boards can now use the Lima driver, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the goal of making it easier for CI services such as KernelCI to
run tests for it.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enables the FSL EDMA driver by default. This also works around an issue
that imx-i2c driver keeps deferring the probe because of the DMA is not
ready. And currently the DMA engine framework can not correctly tell
if the DMA channels will truly become available later (it will never be
available if the DMA driver is not enabled).
This will cause indefinite messages like below:
[ 3.335829] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
[ 3.344455] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm)
[ 3.350917] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
[ 3.362089] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
[ 3.370741] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm)
[ 3.377205] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
[ 3.388455] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
.....
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tegra186 board under arm64 is using this device, according to
its dts file. So this patch enables its driver with a "=m" as
the other HWMON drivers.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support for the TI HD3SS320 USB Type-C DRP Port controller driver
by turning on CONFIG_TYPEC and CONFIG_TYPEC_HD3SS3220 as modules.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Allwinner sun6i DMA drivers is used on A64 and H6 boards.
Enable it as a module.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The SUNXI_WATCHDOG option is required to make the
watchdog available on Allwinner H6.
Enable this option as a module.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The EK874 board comes with a TDA19988 chip on board, therefore
enable it in the defconfig.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sid contains speedbin information and temperature sensor
calibration information and more, which are important for SOC.
This patch enables CONFIG_NVMEM_SUNXI_SID by default.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Enable mfd and regulator driver for PMIC found on imx8mm-evk boards
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current lpi2c driver can work on imx8 chips so lets enable it. Also
enable few i2c peripherals found on imx8qxp-mek I2C (some were already
used for other boards).
Sensors enabled as modules because not required for boot.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Basic imx8mm support is already available in linux-next just not
enabled in arm64 defconfig. With this patch imx8mm-evk can boot.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MQ needs it for RTC support.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_IMX_SC_WDT as module to support i.MX system
controller watchdog.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the CONFIG_SPI_IMX option so that i.MX8M can use the
imx spi driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Mostly the usual churn due to options being reordered or not added
in the right locations.
- Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out.
-----BEGIN PGP SIGNATURE-----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=IKfA
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Mostly the usual churn due to options being reordered or not added in
the right locations.
Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: Update UFSHCD for Hi3660 soc
ARM: multi_v7_defconfig: Enable support for STPMIC1
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
arm64: defconfig: enable mv-xor driver
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: qcom_defconfig: add options for LG Nexus 5 phone
arm64: defconfig: include the Agilex platform to the arm64 defconfig
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers
arm64: defconfig: enable fpga and service layer
...
- Document (kerneldoc) core mfd_add_devices() API
- New Drivers
- Add support for Altera SOCFPGA System Manager
- Add support for Maxim MAX77650/77651 PMIC
- Add support for Maxim MAX77663 PMIC
- Add support for ST Multi-Function eXpander (STMFX)
- New Device Support
- Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
- Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
- Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
- Add support for USB X-Powers AXP 8xx PMICs
- Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
- Add support for USB PD Logger to ChromeOS EC
- Add support for AXP223 to X-Powers AXP series PMICs
- Add support for Power Supply to X-Powers AXP 803 PMICs
- Add support for Comet Lake to Intel Low Power Subsystem
- Add support for Fingerprint MCU to ChromeOS EC
- Add support for Touchpad MCU to ChromeOS EC
- Move TI LM3532 support to LED
- New Functionality
- Add/extend DT support; max77650, max77620
- Add support for power-off; max77620
- Add support for clocking; syscon
- Add support for host sleep event; cros_ec
- Fix-ups
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
- Bug Fixes
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio
-----BEGIN PGP SIGNATURE-----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=dTSD
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Document (kerneldoc) core mfd_add_devices() API
New Drivers:
- Altera SOCFPGA System Manager
- Maxim MAX77650/77651 PMIC
- Maxim MAX77663 PMIC
- ST Multi-Function eXpander (STMFX)
New Device Support:
- LEDs support in Intel Cherry Trail Whiskey Cove PMIC
- RTC support in SAMSUNG Electronics S2MPA01 PMIC
- SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
- USB X-Powers AXP 8xx PMICs
- Integrated Sensor Hub (ISH) in ChromeOS EC
- USB PD Logger in ChromeOS EC
- AXP223 in X-Powers AXP series PMICs
- Power Supply in X-Powers AXP 803 PMICs
- Comet Lake in Intel Low Power Subsystem
- Fingerprint MCU in ChromeOS EC
- Touchpad MCU in ChromeOS EC
- Move TI LM3532 support to LED
New Functionality:
- max77650, max77620: Add/extend DT support
- max77620 power-off
- syscon clocking
- croc_ec host sleep event
Fix-ups:
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
Bug Fixes:
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio"
* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: Use dev_get_drvdata() directly
mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
mfd: cros_ec: Instantiate properly CrOS FP MCU device
mfd: cros_ec: Update the EC feature codes
mfd: intel-lpss: Add Intel Comet Lake PCI IDs
mfd: lochnagar: Add links to binding docs for sound and hwmon
mfd: ab8500-debugfs: Fix a typo ("deubgfs")
mfd: imx6sx: Add MQS register definition for iomuxc gpr
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
mfd: tps65912-spi: Add missing of table registration
mfd: axp20x: Add USB power supply mfd cell to AXP803
mfd: sun6i-prcm: Fix build warning for non-OF configurations
mfd: intel-lpss: Set the device in reset state when init
platform/chrome: Add support for v1 of host sleep event
mfd: cros_ec: Add host_sleep_event_v1 command
mfd: cros_ec: Instantiate the CrOS USB PD logger driver
mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
...
