Now that we have btf__get_raw_data() it's trivial for tests to iterate
over all strings for testing purposes, which eliminates the need for
btf__get_strings() API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch changes struct btf_ext to retain original data in sequential
block of memory, which makes it possible to expose
btf_ext__get_raw_data() interface similar to btf__get_raw_data(), allowing
users of libbpf to get access to raw representation of .BTF.ext section.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch exposes new API btf__get_raw_data() that allows to get a copy
of raw BTF data out of struct btf. This is useful for external programs
that need to manipulate raw data, e.g., pahole using btf__dedup() to
deduplicate BTF type info and then writing it back to file.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change splits out previous btf__new functionality of constructing
struct btf and loading it into kernel into two:
- btf__new() just creates and initializes struct btf
- btf__load() attempts to load existing struct btf into kernel
btf__free will still close BTF fd, if it was ever loaded successfully
into kernel.
This change allows users of libbpf to manipulate BTF using its API,
without the need to unnecessarily load it into kernel.
One of the intended use cases is pahole, which will do DWARF to BTF
conversion and then use libbpf to do type deduplication, while then
handling ELF sections overwriting and other concerns on its own.
Fixes: 2d3feca8c4 ("bpf: btf: print map dump and lookup with btf info")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:
"This pull request is dedicated to the upcoming snowpocalypse parts 2
and 3 in the Pacific Northwest:
1) Drop profiles are broken because some drivers use dev_kfree_skb*
instead of dev_consume_skb*, from Yang Wei.
2) Fix IWLWIFI kconfig deps, from Luca Coelho.
3) Fix percpu maps updating in bpftool, from Paolo Abeni.
4) Missing station release in batman-adv, from Felix Fietkau.
5) Fix some networking compat ioctl bugs, from Johannes Berg.
6) ucc_geth must reset the BQL queue state when stopping the device,
from Mathias Thore.
7) Several XDP bug fixes in virtio_net from Toshiaki Makita.
8) TSO packets must be sent always on queue 0 in stmmac, from Jose
Abreu.
9) Fix socket refcounting bug in RDS, from Eric Dumazet.
10) Handle sparse cpu allocations in bpf selftests, from Martynas
Pumputis.
11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
Feitkau.
12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
Greg Kroah-Hartman.
13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
ccid, from Eric Dumazet.
14) Need to reload WoL password into bcmsysport device after deep
sleeps, from Florian Fainelli.
15) Remove filter from mask before freeing in cls_flower, from Petr
Machata.
16) Missing release and use after free in error paths of s390 qeth
code, from Julian Wiedmann.
17) Fix lockdep false positive in dsa code, from Marc Zyngier.
18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.
19) Fix EQ firmware assert in qed driver, from Manish Chopra.
20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net: dsa: b53: Fix for failure when irq is not defined in dt
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
net: Don't default Cavium PTP driver to 'y'
net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net/mlx5e: Don't overwrite pedit action when multiple pedit used
net/mlx5e: Update hw flows when encap source mac changed
qed*: Advance drivers version to 8.37.0.20
qed: Change verbosity for coalescing message.
qede: Fix system crash on configuring channels.
qed: Consider TX tcs while deriving the max num_queues for PF.
...
Here are some small char and misc driver fixes for 5.0-rc6.
Nothing huge here, some more binderfs fixups found as people use it, and
there is a "large" selftest added to validate the binderfs code, which
makes up the majority of this pull request.
There's also some small mei and mic fixes to resolve some reported
issues.
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXF03cw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynULgCeILcTViHw5hJDl719p776CiVjOmMAn2wFXob9
vk5MXb1j5Uf4liLz2x9K
=jGjf
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.0-rc6.
Nothing huge here, some more binderfs fixups found as people use it,
and there is a "large" selftest added to validate the binderfs code,
which makes up the majority of this pull request.
There's also some small mei and mic fixes to resolve some reported
issues.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mic: vop: Fix crash on remove
mic: vop: Fix use-after-free on remove
binderfs: remove separate device_initcall()
fpga: stratix10-soc: fix wrong of_node_put() in init function
mic: vop: Fix broken virtqueues
mei: free read cb on ctrl_wr list flush
samples: mei: use /dev/mei0 instead of /dev/mei
mei: me: add ice lake point device id.
binderfs: respect limit on binder control creation
binder: fix CONFIG_ANDROID_BINDER_DEVICES
selftests: add binderfs selftests
Here are some small iio and staging driver fixes for 5.0-rc6.
Nothing big, just resolve some reported IIO driver issues, and one
staging driver bug. One staging driver patch was added and then
reverted as well.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXF08/g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yncDQCdHPommvFLUaEcsStGC8Ijg6kBn8IAoJTxwIvQ
Qt9HCHiSuniry6xGY+UP
=lZ/Y
-----END PGP SIGNATURE-----
Merge tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some small iio and staging driver fixes for 5.0-rc6.
Nothing big, just resolve some reported IIO driver issues, and one
staging driver bug. One staging driver patch was added and then
reverted as well.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()"
staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()
staging: octeon: fix broken phylib usage
iio: ti-ads8688: Update buffer allocation for timestamps
tools: iio: iio_generic_buffer: make num_loops signed
iio: adc: axp288: Fix TS-pin handling
iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
The kernel verifier has three levels of logs:
0: no logs
1: logs mostly useful
> 1: verbose
Current libbpf API functions bpf_load_program_xattr() and
bpf_load_program() cannot specify log_level.
The bcc, however, provides an interface for user to
specify log_level 2 for verbose output.
This patch added log_level into structure
bpf_load_program_attr, so users, including bcc, can use
bpf_load_program_xattr() to change log_level. The
supported log_level is 0, 1, and 2.
The bpf selftest test_sock.c is modified to enable log_level = 2.
If the "verbose" in test_sock.c is changed to true,
the test will output logs like below:
$ ./test_sock
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
0: (bf) r6 = r1
1: R1=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
1: (61) r7 = *(u32 *)(r6 +28)
invalid bpf_context access off=28 size=4
Test case: bind4 load with invalid access: src_ip6 .. [PASS]
...
Test case: bind6 allow all .. [PASS]
Summary: 16 PASSED, 0 FAILED
Some test_sock tests are negative tests and verbose verifier
log will be printed out as shown in the above.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Few files in libbpf are using bzero() function (defined in strings.h header), but
don't include corresponding header. When libbpf is added as a dependency to pahole,
this undeterministically causes warnings on some machines:
bpf.c:225:2: warning: implicit declaration of function 'bzero' [-Wimplicit-function-declaration]
bzero(&attr, sizeof(attr));
^~~~~
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-02-07
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add a riscv64 JIT for BPF, from Björn.
2) Implement BTF deduplication algorithm for libbpf which takes BTF type
information containing duplicate per-compilation unit information and
reduces it to an equivalent set of BTF types with no duplication and
without loss of information, from Andrii.
3) Offloaded and native BPF XDP programs can coexist today, enable also
offloaded and generic ones as well, from Jakub.
4) Expose various BTF related helper functions in libbpf as API which
are in particular helpful for JITed programs, from Yonghong.
5) Fix the recently added JMP32 code emission in s390x JIT, from Heiko.
6) Fix BPF kselftests' tcp_{server,client}.py to be able to run inside
a network namespace, also add a fix for libbpf to get libbpf_print()
working, from Stanislav.
7) Fixes for bpftool documentation, from Prashant.
8) Type cleanup in BPF kselftests' test_maps.c to silence a gcc8 warning,
from Breno.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a simple topology consisting of two hosts directly connected to a
router. Make sure IPv4/IPv6 ping works and then add blackhole routes.
Test that ping fails and that the routes are marked as offloaded. Use a
simple tc filter to test that packets were dropped by the ASIC and not
trapped to the CPU.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling test_maps selftest with GCC-8, it warns that an array
might be indexed with a negative value, which could cause a negative
out of bound access, depending on parameters of the function. This
is the GCC-8 warning:
gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf -I../../../../include/generated -DHAVE_GENHDR -I../../../include test_maps.c /home/breno/Devel/linux/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread -o /home/breno/Devel/linux/tools/testing/selftests/bpf/test_maps
In file included from test_maps.c:16:
test_maps.c: In function ‘run_all_tests’:
test_maps.c:1079:10: warning: array subscript -1 is below array bounds of ‘pid_t[<Ube20> + 1]’ [-Warray-bounds]
assert(waitpid(pid[i], &status, 0) == pid[i]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
test_maps.c:1059:6: warning: array subscript -1 is below array bounds of ‘pid_t[<Ube20> + 1]’ [-Warray-bounds]
pid[i] = fork();
~~~^~~
This patch simply guarantees that the task(s) variables are unsigned,
thus, they could never be a negative number (which they are not in
current code anyway), hence avoiding an out of bound access warning.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Test adding the offloaded program after the other program
is already installed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add simple sanity check for enabling generic and offload
XDP, simply reuse the native and offload checks.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Figuring out which exact check in test_offload.py takes more
time than it should. Print the traceback (to the screen and
the logs).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Recent changes added extack to program replacement path,
expect extack instead of generic messages.
Fixes: 01dde20ce0 ("xdp: Provide extack messages when prog attachment failed")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The timestamp can use useful to find part of a trace that has an error
without outputting all of the trace e.g. using the itrace 's' option to
skip initial number of events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190206103947.15750-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Data is copied when the trace is stopped, so packets are never split
between buffers except when processing if the buffer cannot fit in the
address space which can only happen on 32-bit systems. Change the logic
to reflect that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190206103947.15750-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CYC packet timestamp calculation depends upon CBR which was being
cleared upon overflow (OVF). That can cause errors due to failing to
synchronize with sideband events. Even if a CBR change has been lost,
the old CBR is still a better estimate than zero. So remove the clearing
of CBR.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190206103947.15750-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define auxtrace record alignment so that it can be referenced elsewhere.
Note this is preparation for patch "perf intel-pt: Fix overlap calculation
for padding"
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190206103947.15750-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The compiler might optimize a call/ret combination by making it a jmp.
However the thread-stack does not presently cater for that, so that such
control flow is not visible in the call graph. Make it visible by
recording on the stack a branch to the start of a different symbol.
Note, that means when a ret pops the stack, all jmps must be popped off
first.
Example:
$ cat jmp-to-fn.c
__attribute__((noinline)) int bar(void)
{
return -1;
}
__attribute__((noinline)) int foo(void)
{
return bar() + 1;
}
int main()
{
return foo();
}
$ gcc -ggdb3 -Wall -Wextra -O2 -o jmp-to-fn jmp-to-fn.c
$ objdump -d jmp-to-fn
<SNIP>
0000000000001040 <main>:
1040: 31 c0 xor %eax,%eax
1042: e9 09 01 00 00 jmpq 1150 <foo>
<SNIP>
0000000000001140 <bar>:
1140: b8 ff ff ff ff mov $0xffffffff,%eax
1145: c3 retq
<SNIP>
0000000000001150 <foo>:
1150: 31 c0 xor %eax,%eax
1152: e8 e9 ff ff ff callq 1140 <bar>
1157: 83 c0 01 add $0x1,%eax
115a: c3 retq
<SNIP>
$ perf record -o jmp-to-fn.perf.data -e intel_pt/cyc/u ./jmp-to-fn
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0,017 MB jmp-to-fn.perf.data ]
$ perf script -i jmp-to-fn.perf.data --itrace=be -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py jmp-to-fn.db branches calls
2019-01-08 13:24:58.783069 Creating database...
2019-01-08 13:24:58.794650 Writing records...
2019-01-08 13:24:59.008050 Adding indexes
2019-01-08 13:24:59.015802 Done
$ ~/libexec/perf-core/scripts/python/exported-sql-viewer.py jmp-to-fn.db
Before:
main
-> bar
After:
main
-> foo
-> bar
Committer testing:
Install the python2-pyside package, then select these menu options
on the GUI:
"Reports"
"Context sensitive callgraphs"
Then go on expanding the symbols, to get, full picture when doing this
on a fedora:29 with gcc version 8.2.1 20181215 (Red Hat 8.2.1-6) (GCC):
jmp-to-fn
PID:TID
_start (ld-2.28.so)
__libc_start_main
main
foo
bar
To verify that indeed, this fixes the problem.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190109091835.5570-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make thread_stack__no_call_return() more readable by adding more local
variables.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190109091835.5570-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If 'cp' is checked in thread_stack__push_cp() a number of error checks
can be removed, reducing code size and improving readability.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190109091835.5570-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kallsyms symbols do not have a size, so the size becomes the distance to
the next symbol.
Consequently the recently added trampoline symbols end up with large
sizes because the trampolines are some distance from one another and the
main kernel map.
However, symbols that end outside their map can disrupt the symbol tree
because, after mapping, it can appear incorrectly that they overlap
other symbols.
Add logic to truncate symbol size to the end of the corresponding map.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Fixes: d83212d5dd ("kallsyms, x86: Export addresses of PTI entry trampolines")
Link: http://lkml.kernel.org/r/20190109091835.5570-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix incorrect event names for the Load_Miss_Real_Latency metric for
Cascadelake server in the same manner as commit 91b2b97025 for SKL/SKX.
Signed-off-by: William Cohen <wcohen@redhat.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190129170536.22510-1-wcohen@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When return from exception, we need to distinguish if it's system call
return or for other type exceptions for setting sample flags. Due to
the exception return packet doesn't contain exception number, so we
cannot decide sample flags based on exception number.
On the other hand, the exception return packet is followed by an
instruction range packet; this range packet deliveries the start address
after exception handling, we can check if it is a SVC instruction just
before the start address. If there has one SVC instruction is found
ahead the return address, this means it's an exception return for system
call; otherwise it is an normal return for other exceptions.
This patch is to set sample flags for exception return packet, firstly
it simply set sample flags as PERF_IP_FLAG_INTERRUPT for all exception
returns since at this point it doesn't know what's exactly the exception
type. We will defer to decide if it's an exception return for system
call when the next instruction range packet comes, it checks if there
has one SVC instruction prior to the start address and if so we will
change sample flags to PERF_IP_FLAG_SYSCALLRET for system call return.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190129122842.32041-9-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The exception taken and returning are typical flow for instruction jump
but it needs to be handled with exception packets. This patch is to set
sample flags for exception packet.
Since the exception packet contains the exception number, according to
the exception number this patch makes decision for belonging to which
exception types.
The decoder have defined different exception number for ETMv3 and ETMv4
separately, hence this patch needs firstly decide the ETM version by
using the metadata magic number, and this patch adds helper function
cs_etm__get_magic() for easily getting magic number.
Based on different ETM version, the exception packet contains the
exception number, according to the exception number this patch makes
decision for the exception belonging to which exception types.
In this patch, it introduces helper function cs_etm__is_svc_instr(); for
ETMv4 CS_ETMV4_EXC_CALL covers SVC, SMC and HVC cases in the single
exception number, thus need to use cs_etm__is_svc_instr() to decide an
exception taken for system call.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Robert Walker <robert.walker@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190129122842.32041-8-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add traceID in packet, thus we can use traceID to retrieve metadata
pointer from traceID-metadata tuple.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190129122842.32041-7-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If packet processing wants to know the packet is bound with which ETM
version, it needs to access metadata to decide that based on metadata
magic number; but we cannot simply to use CPU logic ID number as index
to access metadata sequential array, especially when system have
hotplugged off CPUs, the metadata array are only allocated for online
CPUs but not offline CPUs, so the CPU logic number doesn't match with
its index in the array.
This patch is to change tuple from traceID-CPU# to traceID-metadata,
thus it can use the tuple to retrieve metadata pointer according to
traceID.
For safe accessing metadata fields, this patch provides helper function
cs_etm__get_cpu() which is used to return CPU number according to
traceID; cs_etm_decoder__buffer_packet() is the first consumer for this
helper function.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190129122842.32041-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an exception packet comes, it contains the information for
exception number; the exception number indicates the exception types, so
from it we can know if the exception is taken for interrupt, system call
or other traps, etc.
This patch simply adds a field in cs_etm_packet struct, it records
exception number for exception packet that will then be used to properly
identify exception types to the perf synthesize mechanic.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190129122842.32041-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the middle of trace stream, it might be interrupted thus the trace
data is not continuous, the trace stream firstly is ended for previous
trace block and restarted for next block.
To display related information for showing trace is restarted, this
patch set sample flags for trace discontinuity:
- If one discontinuity packet is coming, append flag
PERF_IP_FLAG_TRACE_END to the previous packet to indicate the trace
has been ended;
- If one instruction packet is following discontinuity packet, this
instruction packet is the first one packet to restarting trace. So
set flag PERF_IP_FLAG_TRACE_START to discontinuity packet, this flag
will be used to generate sample when connect with the sequential
instruction packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190129122842.32041-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf sample data contains flags to indicate the hardware trace data
is belonging to which type branch instruction, thus this can be used to
print out the human readable string. Arm CoreSight ETM sample data is
missed to set flags and it is always set to zeros, this results in perf
tool skips to print string for instruction types.
This patch is to set branch instruction flags for instruction range
packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190129122842.32041-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Decoder provides last instruction related information, these information
can be used for trace analysis; specifically we can get to know what
kind of branch instruction has been executed, mainly the information are
contained in three element fields:
last_i_type: this is significant type for waypoint calculation, it
indicates the last instruction is one of immediate branch instruction,
indirect branch instruction, instruction barrier (ISB), or data
barrier (DSB/DMB).
last_i_subtype: this is used for instruction sub type, it can be
branch with link, ARMv8 return instruction, ARMv8 eret instruction
(return from exception), or ARMv7 instruction which could imply
return (e.g. MOV PC, LR; POP { ,PC}).
last_instr_cond: it indicates if the last instruction was conditional.
But these three fields are not saved into cs_etm_packet struct, thus
cs-etm layer don't know related information and cannot generate sample
flags for branch instructions.
This patch add corresponding three new fields in cs_etm_packet struct
and save related value into the packet structure, it is preparation for
supporting sample flags.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190129122842.32041-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add documentation for how to pass a BPF program as a perf event.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190201134651.12373-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we make the annotation for the IPC column during the entry
display, already outside of the progress bar scope, so it appears like
'perf report' is stuck.
Move the annotation retrieval to the resort phase, so that all the data
are ready for display.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190204141808.23031-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evsel__output_resort_cb() so we have an interface with a
callback for each hist entry. It will be used in the following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190204141808.23031-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add argument to hists__resort_cb_t so that we can pass data from upper
layers to the callback function. It will be used in the following
patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190204141808.23031-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It prevents copy elision, generating this warning when building with
fedora:rawhide's clang:
clang version 7.0.1 (Fedora 7.0.1-2.fc30)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
Found candidate GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9
Found candidate GCC installation: /usr/lib/gcc/x86_64-redhat-linux/9
Selected GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9
Candidate multilib: .;@m64
Candidate multilib: 32;@m32
Selected multilib: .;@m64
$ make -C tools/perf CC=clang LIBCLANGLLVM=1
<SNIP>
util/c++/clang.cpp: In function 'std::unique_ptr<llvm::SmallVectorImpl<char> > perf::getBPFObjectFromModule(llvm::Module*)':
util/c++/clang.cpp:163:18: error: moving a local object in a return statement prevents copy elision [-Werror=pessimizing-move]
163 | return std::move(Buffer);
| ~~~~~~~~~^~~~~~~~
util/c++/clang.cpp:163:18: note: remove 'std::move' call
cc1plus: all warnings being treated as errors
<SNIP>
References:
http://www.cplusplus.com/forum/general/186411/#msg908572https://en.cppreference.com/w/cpp/language/return#Noteshttps://en.cppreference.com/w/cpp/language/copy_elision
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-lehqf5x5q96l0o8myhb6blz6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Build node cpu masks for mmap data buffers. Apply node cpu masks to tool
thread every time it references data buffers cross node or cross cpu.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/b25e4ebc-078d-2c7b-216c-f0bed108d073@linux.intel.com
[ Use cpu-set-sched.h to get the CPU_{EQUAL,OR}() fallbacks for older systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From the glibc sources, so that we can keep the tooling buildable in
older systems while using recent sched.h CPU_ macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-hvm9ysmrjip75ebdzhzoh429@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allocate and bind AIO user space buffers to the memory nodes that mmap
kernel buffers are bound to.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5a5adebc-afe0-4806-81cd-180d49ec043f@linux.intel.com
[ Do not use 'index' as a variable name, it is a define in older glibcs ]
Link: http://lkml.kernel.org/r/20190205151526.GC10613@kernel.org
[ Add -lnuma to the python build when -DHAVE_LIBNUMA_SUPPORT is present, fixing 'perf test python' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allocate affinity option and masks for mmap data buffers and record
thread as well as initialize allocated objects.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/526fa2b0-07de-6dbd-a7e9-26ba875593c9@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CoreSight was the only client of the PMU's set_drv_config() API. Now
that it is no longer needed by CoreSight remove it from the code base.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20190131184714.20388-8-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the event's config2 attribute is used to communicate sink
selection to the kernel, remove the old set_drv_config() implementation
since it is no longer needed.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20190131184714.20388-7-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The communication of sink information for a trace session doesn't work
when more than on CPU is involved in the scenario due to the static
nature of sysfs. As such communicate the sink information to each event
by using the perf_event::attr:config2 attribute. The information sent
to the kernel is an hash of the sink's name, which is unique in a
system.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20190131184714.20388-6-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move definition of EVENT_SOURCE_DEVICE_PATH to pmu.h so that it can be
used by other files than pmu.c
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20190131184714.20388-5-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To cut the header dep tree, to get unecessary object rebuilds to be
reduced when a change happens in headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ph72xhl9moqa0g1hxcyudwfn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This header was being obtained indirectly, by sheer luck, add it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c3h8oyav16iu5ivput8n4wt6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the include header dependency tree and speed up perf builds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dngwaxuhfnhksawgdpo6e74n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the header dependency tree.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-rc389o1z0htwukqv6ni1viun@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It needs the definitions for PATH_MAX and snprintf, was getting it
by luck from headers it included and that are now being sanitized.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7bbh3kk0h5mywvfqm64nhv28@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nothing that is provided by callchain.h is used there, just things that
should've be directly included in hist.h, such as rbtree.h and a
map_symbol forward declaration.
Remove it so that we reduce the headers dependency tree.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zivvqfx93w5zzur7hr7h0nlh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its getting it from hist.h and that will go away, as that header doesn't
need callchain.h at all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6ebl3mwwiqocl79yts44qltu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Also add stdio.h to get the FILE definition.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8vx5396phynuxhdsxxfbdhsk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the header dependency and avoid unnecessary rebuilds when
things change in symbol.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6duflwliprh2tr47w5x4t260@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several places were using definitions found in symbols.h but not
including it, getting it by sheer luck from some other headers that now
are in the process of removing that include because they don't need it
or because simply having struct forward declarations is enough, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xbcvvx296d70kpg9wb0qmeq9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the includes dependencies.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-cmvg5ght75mmfg1efeyna9rn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're going to remove symbol.h from some places and this breaks
some of the perf tests, fix it by adding the required includes.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wpa4b6x0btpnh2kjxzl9no4w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And since machine.h only needs what is in there, make it stop including
map.h and instead include this newly introduced map_groups.h instead.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dbob25fv5rp2rjpwlnterf38@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lots of places get the map.h file indirectly, and since we're going to
remove it from machine.h, then those need to include it directly, do it
now, before we remove that dep.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow headers just wanting this definition to be able to get it
without all the things in symbol.h, to reduce the include dep tree.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-l32z2qyhs6fe8unf4gk2ead2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That was the only thing that made including map.h in callchain.h a
requiriment, so uninline it and just add a 'struct map' forward
declaration.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7fjz4hvv1bpzqaeriku44fn4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the header dependencies, since we already have a srccode.h
header, then there is where the 'struct srccode_state' should be, and
map.h, that is more widely used should have just a forward declaraion
of 'struct srccode_state'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-64lrkjjaa7wlo1zi2gr5u3es@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It uses strstarts(), that is defined in linux/string.h but that was
being including by sheer luck, indirectly, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/n/tip-vub5lp82wb7vy5wssfad0xu8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It uses several structs but don't explicitely includes the headers where
they are defined, getting them by sheer luck from one of the headers it
includes, since those are being streamlined to avoid unnecessary
rebuilds when changes are made to a random header, they will break, fix
them now so that they continue to build.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/n/tip-j1nyksegpnz36wi3qx2p46i1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 96408c4344 ("tools/bpf: implement libbpf
btf__get_map_kv_tids() API function") refactored
function bpf_map_find_btf_info() and moved bulk of
implementation into btf.c as btf__get_map_kv_tids().
This change introduced a bug such that test_btf will
print out the following warning although the test passed:
BTF libbpf test[2] (test_btf_nokv.o): libbpf: map:btf_map
container_name:____btf_map_btf_map cannot be found
in BTF. Missing BPF_ANNOTATE_KV_PAIR?
Previously, the error message is guarded with pr_debug().
Commit 96408c4344 changed it to pr_warning() and
hence caused the warning.
Restoring to pr_debug() for the message fixed the issue.
Fixes: 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
added the API function btf__get_map_kv_tids():
btf__get_map_kv_tids(const struct btf *btf, char *map_name, ...)
The parameter map_name has type "char *". This is okay inside libbpf library since
the map_name is from bpf_map->name which also has type "char *".
This will be problematic if the caller for map_name already has attribute "const",
e.g., from C++ string.c_str(). It will result in either a warning or an error.
/home/yhs/work/bcc/src/cc/btf.cc:166:51:
error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
return btf__get_map_kv_tids(btf_, map_name.c_str()
This patch added "const" attributes to map_name parameter.
Fixes: 96408c4344 ("tools/bpf: implement libbpf btf__get_map_kv_tids() API function")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 9c65112744 ("selftests/btf: add initial BTF dedup tests")
added dedup tests in test_btf.c.
It broke the raw test:
BTF raw test[71] (func proto (Bad arg name_off)):
btf_raw_create:2905:FAIL Error getting string #65535, strs_cnt:1
The test itself encodes invalid func_proto parameter name
offset 0xffffFFFF as a negative test for the kernel.
The above commit changed the meaning of that offset and
resulted in a user space error.
#define NAME_NTH(N) (0xffff0000 | N)
#define IS_NAME_NTH(X) ((X & 0xffff0000) == 0xffff0000)
#define GET_NAME_NTH_IDX(X) (X & 0x0000ffff)
Currently, the kernel permits maximum name offset 0xffff.
Set the test name off as 0x0fffFFFF to trigger the kernel
verification failure.
Cc: Andrii Nakryiko <andriin@fb.com>
Fixes: 9c65112744 ("selftests/btf: add initial BTF dedup tests")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
RISC-V does, in-general, not have "efficient unaligned access". When
testing the RISC-V BPF JIT, some selftests failed in the verification
due to misaligned access. Annotate these tests with the
F_NEEDS_EFFICIENT_UNALIGNED_ACCESS flag.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch sets up a new kind of tests (BTF dedup tests) and tests few aspects of
BTF dedup algorithm. More complete set of tests will come in follow up patches.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch implements BTF types deduplication algorithm. It allows to
greatly compress typical output of pahole's DWARF-to-BTF conversion or
LLVM's compilation output by detecting and collapsing identical types emitted in
isolation per compilation unit. Algorithm also resolves struct/union forward
declarations into concrete BTF types representing referenced struct/union. If
undesired, this resolution can be disabled through specifying corresponding options.
Algorithm itself and its application to Linux kernel's BTF types is
described in details at:
https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This pre-patch extracts calculation of amount of space taken by BTF type descriptor
for later reuse by btf_dedup functionality.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Support both Python 2 and Python 3 in tests/attr.py
The use of "except as" syntax implies the minimum supported Python2 version is
now v2.6
Committer testing:
$ make -C tools/perf PYTHON3=python install-bin
Before:
# perf test attr
16: Setup struct perf_event_attr : FAILED!
48: Synthesize attr update : Ok
[root@quaco ~]# perf test -v attr
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 3121
File "/home/acme/libexec/perf-core/tests/attr.py", line 324
except Unsup, obj:
^
SyntaxError: invalid syntax
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
48: Synthesize attr update :
--- start ---
test child forked, pid 3124
test child finished with 0
---- end ----
Synthesize attr update: Ok
#
After:
# perf test attr
16: Setup struct perf_event_attr : Ok
48: Synthesize attr update : Ok
#
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the recent print rework we now have the following problem:
pr_{warning,info,debug} expand to __pr which calls libbpf_print.
libbpf_print does va_start and calls __libbpf_pr with va_list argument.
In __base_pr we again do va_start. Because the next argument is a
va_list, we don't get correct pointer to the argument (and print noting
in my case, I don't know why it doesn't crash tbh).
Fix this by changing libbpf_print_fn_t signature to accept va_list and
remove unneeded calls to va_start in the existing users.
Alternatively, this can we solved by exporting __libbpf_pr and
changing __pr macro to (and killing libbpf_print):
{
if (__libbpf_pr)
__libbpf_pr(level, "libbpf: " fmt, ##__VA_ARGS__)
}
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, to get map key/value type id's, the macro
BPF_ANNOTATE_KV_PAIR(<map_name>, <key_type>, <value_type>)
needs to be defined in the bpf program for the
corresponding map.
During program/map loading time,
the local static function bpf_map_find_btf_info()
in libbpf.c is implemented to retrieve the key/value
type ids given the map name.
The patch refactored function bpf_map_find_btf_info()
to create an API btf__get_map_kv_tids() which includes
the bulk of implementation for the original function.
The API btf__get_map_kv_tids() can be used by bcc,
a JIT based bpf compilation system, which uses the
same BPF_ANNOTATE_KV_PAIR to record map key/value types.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following set of functions, which manipulates .BTF.ext
section, are exposed as API functions:
. btf_ext__new
. btf_ext__free
. btf_ext__reloc_func_info
. btf_ext__reloc_line_info
. btf_ext__func_info_rec_size
. btf_ext__line_info_rec_size
These functions are useful for JIT based bpf codegen, e.g.,
bcc, to manipulate in-memory .BTF.ext sections.
The signature of function btf_ext__reloc_func_info()
is also changed to be the same as its definition in btf.c.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Bind and connect to localhost. There is no reason for this test to
use non-localhost interface. This lets us run this test in a network
namespace.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:
$ perf trace -e open -- touch /dev/null
[...]
0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
[...]
The output without such beautifier looks like:
0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:
0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
Fix it by hooking into all the expanded probes (inlines), now, for instance:
[root@quaco ~]# perf probe -l
probe:vfs_getname (on getname_flags:73@fs/namei.c with pathname)
probe:vfs_getname_1 (on getname_flags:73@fs/namei.c with pathname)
[root@quaco ~]# perf trace -e open* sleep 1
0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC) = 3
0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC) = 3
0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
[root@quaco ~]#
Works, further verified with:
[root@quaco ~]# perf test vfs
65: Use vfs_getname probe to get syscall args filenames : Ok
66: Add vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
[root@quaco ~]#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:
# nm perf | grep annobin | head -10
0000000000241100 t .annobin_annotate.c
0000000000326490 t .annobin_annotate.c
0000000000249255 t .annobin_annotate.c_end
00000000003283a8 t .annobin_annotate.c_end
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bc3e2 t .annobin_annotate.c_end.unlikely
00000000001bc400 t .annobin_annotate.c_end.unlikely
00000000001bce18 t .annobin_annotate.c.hot
00000000001bce18 t .annobin_annotate.c.hot
...
Those symbols have no use for report or annotation and should be
skipped. Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:
# perf test dwarf -v
59: Test dwarf unwind :
--- start ---
test child forked, pid 8515
unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
...
got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
unwind: failed with 'no error'
The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:
# readelf -s ./perf | grep annobin | head -1
40: 00000000001bce4f 0 NOTYPE LOCAL HIDDEN 13 .annobin_init.c
They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.
> Just to be awkward, if you are going to ignore STV_HIDDEN
> symbols then you should probably also ignore STV_INTERNAL ones
> as well... Annobin does not generate them, but you never know,
> one day some other tool might create some.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those aren't present in Alpine Linux 3.4 to edge, so provide fallback
defines to get the next patch building there keeping the build
bisectable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-03cg3gya2ju4ba2x6ibb9fuz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, the libbpf API function libbpf_set_print()
takes three function pointer parameters for warning, info
and debug printout respectively.
This patch changes the API to have just one function pointer
parameter and the function pointer has one additional
parameter "debugging level". So if in the future, if
the debug level is increased, the function signature
won't change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the btf log is allocated and printed out in case
of error at LIBBPF_DEBUG level.
Such logs from kernel are very important for debugging.
For example, bpf syscall BPF_PROG_LOAD command can get
verifier logs back to user space. In function load_program()
of libbpf.c, the log buffer is allocated unconditionally
and printed out at pr_warning() level.
Let us do the similar thing here for btf. Allocate buffer
unconditionally and print out error logs at pr_warning() level.
This can reduce one global function and
optimize for common situations where pr_warning()
is activated either by default or by user supplied
debug output function.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A global function libbpf_print, which is invisible
outside the shared library, is defined to print based
on levels. The pr_warning, pr_info and pr_debug
macros are moved into the newly created header
common.h. So any .c file including common.h can
use these macros directly.
Currently btf__new and btf_ext__new API has an argument getting
__pr_debug function pointer into btf.c so the debugging information
can be printed there. This patch removed this parameter
from btf__new and btf_ext__new and directly using pr_debug in btf.c.
Another global function libbpf_print_level_available, also
invisible outside the shared library, can test
whether a particular level debug printing is
available or not. It is used in btf.c to
test whether DEBUG level debug printing is availabl or not,
based on which the log buffer will be allocated when loading
btf to the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To get the changes in this cset:
f275ee0fa3 ("IN_BADCLASS: fix macro to actually work")
The macros changed in this cset are not used in tools/, so this is just
to silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xbk34kwamn8bw8ywpuxetct9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It prevents copy elision, generating this warning when building with
fedora:rawhide's clang:
clang version 7.0.1 (Fedora 7.0.1-2.fc30)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
Found candidate GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9
Found candidate GCC installation: /usr/lib/gcc/x86_64-redhat-linux/9
Selected GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9
Candidate multilib: .;@m64
Candidate multilib: 32;@m32
Selected multilib: .;@m64
$ make -C tools/perf CC=clang LIBCLANGLLVM=1
<SNIP>
util/c++/clang.cpp: In function 'std::unique_ptr<llvm::SmallVectorImpl<char> > perf::getBPFObjectFromModule(llvm::Module*)':
util/c++/clang.cpp:163:18: error: moving a local object in a return statement prevents copy elision [-Werror=pessimizing-move]
163 | return std::move(Buffer);
| ~~~~~~~~~^~~~~~~~
util/c++/clang.cpp:163:18: note: remove 'std::move' call
cc1plus: all warnings being treated as errors
<SNIP>
References:
http://www.cplusplus.com/forum/general/186411/#msg908572https://en.cppreference.com/w/cpp/language/return#Noteshttps://en.cppreference.com/w/cpp/language/copy_elision
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-lehqf5x5q96l0o8myhb6blz6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PowerPC hardware does not have a builtin latency filter (--ldlat) for
the "mem-load" event and perf_mem_events by default includes
"/ldlat=30/" which is causing a failure on PowerPC. Refactor the code to
support "perf mem/c2c" on PowerPC.
This patch depends on kernel side changes done my Madhavan:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-December/182596.html
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Dick Fowles <fowles@inreach.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20190129132412.771-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Notice that the use of the bitwise OR operator '|' always leads to true
in this particular case, which seems a bit suspicious due to the context
in which this expression is being used.
Fix this by using bitwise AND operator '&' instead.
This bug was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 6a6cd11d4e ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190122233439.GA5868@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Compiling rxtimestamp.c generates error messages due to
non-existing declaration for write() library call.
Add missing unistd.h include to provide the declaration and
silence the error.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Thomas Gleixner:
"A pile of perf updates:
- Fix broken sanity check in the /proc/sys/kernel/perf_cpu_time_max_percent
write handler
- Cure a perf script crash which caused by an unitinialized data
structure
- Highlight the hottest instruction in perf top and not a random one
- Cure yet another clang issue when building perf python
- Handle topology entries with no CPU correctly in the tools
- Handle perf data which contains both tracepoints and performance
counter entries correctly.
- Add a missing NULL pointer check in perf ordered_events_free()"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf script: Fix crash when processing recorded stat data
perf top: Fix wrong hottest instruction highlighted
perf tools: Handle TOPOLOGY headers with no CPU
perf python: Remove -fstack-clash-protection when building with some clang versions
perf core: Fix perf_proc_update_handler() bug
perf script: Fix crash with printing mixed trace point and other events
perf ordered_events: Fix crash in ordered_events__free
Been a busy month, so these are rather later than they should have been.
* atlas-ph-sensor:
- Temperature scale didn't correspond to the ABI.
* axp288:
- A few different fixes around the TS-pin handling.
* ti-ads8688
- Not enough space in the buffer used to build the scan to allow for
the timestamp.
* tools - iio_generic_buffer
- Make num_loops signed so that we really are running for ever
rather than just a long time when we specify -1.
-----BEGIN PGP SIGNATURE-----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=2R0k
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-5.0a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 5.0 cycle.
Been a busy month, so these are rather later than they should have been.
* atlas-ph-sensor:
- Temperature scale didn't correspond to the ABI.
* axp288:
- A few different fixes around the TS-pin handling.
* ti-ads8688
- Not enough space in the buffer used to build the scan to allow for
the timestamp.
* tools - iio_generic_buffer
- Make num_loops signed so that we really are running for ever
rather than just a long time when we specify -1.
* tag 'iio-fixes-5.0a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: ti-ads8688: Update buffer allocation for timestamps
tools: iio: iio_generic_buffer: make num_loops signed
iio: adc: axp288: Fix TS-pin handling
iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-02-01
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) introduce bpf_spin_lock, from Alexei.
2) convert xdp samples to libbpf, from Maciej.
3) skip verifier tests for unsupported program/map types, from Stanislav.
4) powerpc64 JIT support for BTF line info, from Sandipan.
5) assorted fixed, from Valdis, Jesper, Jiong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
'make clean' is supposed to remove generated files.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-01-31
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) disable preemption in sender side of socket filters, from Alexei.
2) fix two potential deadlocks in syscall bpf lookup and prog_register,
from Martin and Alexei.
3) fix BTF to allow typedef on func_proto, from Yonghong.
4) two bpftool fixes, from Jiri and Paolo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The global variable RET needs to be initialized before each call to
log_test. This test case sets it once before running the tests, but then
calls log_tests for every individual test. Thus a failure in one of the
tests causes spurious failures in follow-up tests as well.
Fix by moving the initialization of RET from test_all() to
full_test_span_gre_dir_acl(), a function that implements the test.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test sets up mirroring such that it mirrors all overlay traffic.
That includes ARP, which causes occasional miscounts and spurious
failures. Ignore ARP explicitly to avoid these problems.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test relies on routing in the primary traffic path, but neglects to
enable forwarding. Do so.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After one LAG slave is downed and another upped, it takes a while for
the neighbor on a bridge to time out and get renegotiated. The test does
prompt update of FDB entries by arpinging. But because the neighbor
still references another address, offloading is not possible, and some
packets may end up not being mirrored.
To force the neighbor renegotiation, simply flush the neighbor table at
the bridge.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ARP or ND traffic can cause spurious migration of FDB back to $swp3.
Mirroring is then updated in accordance with the change, and mirrored
packets are seen at h3, causing a failure.
Detect the case of this spurious roaming, and retry the test.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The untagged egress test sets up mirroring to {,ip6}gretap such that the
underlay goes through a bridge. Then VLAN flags are manipulated to test
that the traffic leaves the bridge 802.1q-tagged or not, as appropriate.
However, when a neighbor expires at the time that the bridge VLAN is
configured as PVID and egress untagged, the following discovery process
can't finish, because the IP address on H3 is still at the VLAN-tagged
netdevice. This manifests by occasional failures where only several of
the 10 required packets get through.
Therefore, when reconfiguring the VLAN flags, move the IP address to the
appropriate device in the H3 VRF.
In addition to that, take this opportunity to embed an ASCII art diagram
to make the topology move obvious.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running in an environment with poor performance (such as a
simulator), processing mirrored packets can take a while. Evaluating the
condition too soon leads to spurious "seen 9, expected 10" failures as
the last packet doesn't have enough time to get mirrored and the mirror
to arrive and bump the observed counters.
Wait for one ping interval before evaluating the test.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running in a simulator, the TTL change takes a while to settle and
during this time the performance of the packet processing is lowered.
The resulting instability leads to ping sending more packets as it
assumes some have been dropped. This then leads to regular spurious
failures as more packets than expected are observed.
Sleep a bit to give the system time to stabilize.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current ping intervals are too short for running mirroring tests in
simulator. This leads to ping sending a follow-up ping before the reply
arrives, thus sending more than the requested 10 ICMP requests. This
traffic is seen at the counters, and causes spurious failures.
Bump interval and timeout numbers 5x in mirroring tests to address the
spurious failures.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current ping intervals are too short for running mirroring tests in
simulator. This leads to ping sending a follow-up ping before the reply
arrives, thus sending more than the requested 10 ICMP requests. Those
are mirrored, and over a certain threshold the test case run is
considered a failure, because too much traffic is observed.
Bump interval and timeout numbers 5x in mirroring tests to address the
spurious failures.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current timeout (2 seconds) proved to be too low for some (emulated)
systems where we run the tests.
Make the timeout configurable and default to 5 seconds.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change most tests to TLS 1.3, while adding tests for previous TLS 1.2
behavior.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wire up support for 256 bit keys from the setsockopt to the crypto
framework
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we have a dedicated netlink attributes for xdp setup on a
particular interface, it is now possible to retrieve the program id that
is currently attached to the interface. The use case is targeted for
sample xdp programs, which will store the program id just after loading
bpf program onto iface. On shutdown, the sample will make sure that it
can unload the program by querying again the iface and verifying that
both program id's matches.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
XDP samples are mostly cooperating with eBPF maps through their file
descriptors. In case of a eBPF program that contains multiple maps it
might be tiresome to iterate through them and call bpf_map__fd for each
one. Add a helper mostly based on bpf_object__find_map_by_name, but
instead of returning the struct bpf_map pointer, return map fd.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add C based test that runs 4 bpf programs in parallel
that update the same hash and array maps.
And another 2 threads that read from these two maps
via lookup(key, value, BPF_F_LOCK) api
to make sure the user space sees consistent value in both
hash and array elements while user space races with kernel bpf progs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
add bpf_spin_lock C based test that requires latest llvm with BTF support
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
add bpf_spin_lock tests to test_verifier.c that don't require
latest llvm with BTF support
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Previously, bpf_num_possible_cpus() had a bug when calculating a
number of possible CPUs in the case of sparse CPU allocations, as
it was considering only the first range or element of
/sys/devices/system/cpu/possible.
E.g. in the case of "0,2-3" (CPU 1 is not available), the function
returned 1 instead of 3.
This patch fixes the function by making it parse all CPU ranges and
elements.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This Kselftest update for Linux 5.0-rc5 consists of run-time fixes to
cpu-hotplug, and seccomp tests, compile fixes to ir, net, and timers
Makefiles.
-----BEGIN PGP SIGNATURE-----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=PV+K
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This consists of run-time fixes to cpu-hotplug, and seccomp tests,
compile fixes to ir, net, and timers Makefiles"
* tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: timers: use LDLIBS instead of LDFLAGS
selftests: net: use LDLIBS instead of LDFLAGS
selftests/seccomp: Enhance per-arch ptrace syscall skip tests
selftests: Use lirc.h from kernel tree, not from system
selftests: cpu-hotplug: fix case where CPUs offline > CPUs present
We don't have this helper if the kernel was compiled without
CONFIG_BPF_EVENTS. Setting prog_type to BPF_PROG_TYPE_TRACEPOINT
let's verifier correctly skip this test based on the missing
prog_type support in the kernel.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use recently introduced bpf_probe_map_type() to skip tests in the
test_verifier if map creation (create_map) fails. It's handled
explicitly for each fixup, i.e. if bpf_create_map returns negative fd,
we probe the kernel for the appropriate map support and skip the
test is map type is not supported.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use recently introduced bpf_probe_prog_type() to skip tests in the
test_verifier() if bpf_verify_program() fails. The skipped test is
indicated in the output.
Example:
...
679/p bpf_get_stack return R0 within range SKIP (unsupported program
type 5)
680/p ld_abs: invalid op 1 OK
...
Summary: 863 PASSED, 165 SKIPPED, 3 FAILED
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use recently introduced bpf_probe_map_type() to skip test_sockmap()
if map creation fails. The skipped test is indicated in the output.
Example:
test_sockmap SKIP (unsupported map type BPF_MAP_TYPE_SOCKMAP)
Fork 1024 tasks to 'test_update_delete'
...
test_sockmap SKIP (unsupported map type BPF_MAP_TYPE_SOCKMAP)
Fork 1024 tasks to 'test_update_delete'
...
test_maps: OK, 2 SKIPPED
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ensure that the bug is fixed and we no longer have C-TCAM spill for two
keys that differ only in delta.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With recent fix in C-TCAM spillage for delta masks, the test stops to be
falsely positive. So fix it not to use delta by adding src_ip bits to the
masks. Alongside with that, use C-TCAM spill trace to see when the
spillage actually happens.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow to specify number of trace hits and move helpers
to the beginning of the file.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the promised selftest for binderfs. It will verify the following
things:
- binderfs mounting works
- binder device allocation works
- performing a binder ioctl() request through a binderfs device works
- binder device removal works
- binder-control removal fails
- binderfs unmounting works
The tests are performed both privileged and unprivileged. The latter
verifies that binderfs behaves correctly in user namespaces.
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed one test_btf raw test such that typedef func_proto
is permitted now.
Fixes: 78a2540e89 ("tools/bpf: Add tests for BTF_KIND_FUNC_PROTO and BTF_KIND_FUNC")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:
1) Need to save away the IV across tls async operations, from Dave
Watson.
2) Upon successful packet processing, we should liberate the SKB with
dev_consume_skb{_irq}(). From Yang Wei.
3) Only apply RX hang workaround on effected macb chips, from Harini
Katakam.
4) Dummy netdev need a proper namespace assigned to them, from Josh
Elsasser.
5) Some paths of nft_compat run lockless now, and thus we need to use a
proper refcnt_t. From Florian Westphal.
6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua.
7) netrom does not refcount sockets properly wrt. timers, fix that by
using the sock timer API. From Cong Wang.
8) Fix locking of inexact inserts of xfrm policies, from Florian
Westphal.
9) Missing xfrm hash generation bump, also from Florian.
10) Missing of_node_put() in hns driver, from Yonglong Liu.
11) Fix DN_IFREQ_SIZE, from Johannes Berg.
12) ip6mr notifier is invoked during traversal of wrong table, from Nir
Dotan.
13) TX promisc settings not performed correctly in qed, from Manish
Chopra.
14) Fix OOB access in vhost, from Jason Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
MAINTAINERS: Add entry for XDP (eXpress Data Path)
net: set default network namespace in init_dummy_netdev()
net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles
net: caif: call dev_consume_skb_any when skb xmit done
net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: macb: Apply RXUBR workaround only to versions with errata
net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq
net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq
net: tls: Fix deadlock in free_resources tx
net: tls: Save iv in tls_rec for async crypto requests
vhost: fix OOB in get_rx_bufs()
qed: Fix stack out of bounds bug
qed: Fix system crash in ll2 xmit
qed: Fix VF probe failure while FLR
qed: Fix LACP pdu drops for VFs
qed: Fix bug in tx promiscuous mode settings
net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
netfilter: ipt_CLUSTERIP: fix warning unused variable cn
...
With the default SPEC_STORE_BYPASS_SECCOMP/SPEC_STORE_BYPASS_PRCTL mode,
the TIF_SSBD bit will be inherited when a new task is fork'ed or cloned.
It will also remain when a new program is execve'ed.
Only certain class of applications (like Java) that can run on behalf of
multiple users on a single thread will require disabling speculative store
bypass for security purposes. Those applications will call prctl(2) at
startup time to disable SSB. They won't rely on the fact the SSB might have
been disabled. Other applications that don't need SSBD will just move on
without checking if SSBD has been turned on or not.
The fact that the TIF_SSBD is inherited across execve(2) boundary will
cause performance of applications that don't need SSBD but their
predecessors have SSBD on to be unwittingly impacted especially if they
write to memory a lot.
To remedy this problem, a new PR_SPEC_DISABLE_NOEXEC argument for the
PR_SET_SPECULATION_CTRL option of prctl(2) is added to allow applications
to specify that the SSBD feature bit on the task structure should be
cleared whenever a new program is being execve'ed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: https://lkml.kernel.org/r/1547676096-3281-1-git-send-email-longman@redhat.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-01-29
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Teach verifier dead code removal, this also allows for optimizing /
removing conditional branches around dead code and to shrink the
resulting image. Code store constrained architectures like nfp would
have hard time doing this at JIT level, from Jakub.
2) Add JMP32 instructions to BPF ISA in order to allow for optimizing
code generation for 32-bit sub-registers. Evaluation shows that this
can result in code reduction of ~5-20% compared to 64 bit-only code
generation. Also add implementation for most JITs, from Jiong.
3) Add support for __int128 types in BTF which is also needed for
vmlinux's BTF conversion to work, from Yonghong.
4) Add a new command to bpftool in order to dump a list of BPF-related
parameters from the system or for a specific network device e.g. in
terms of available prog/map types or helper functions, from Quentin.
5) Add AF_XDP sock_diag interface for querying sockets from user
space which provides information about the RX/TX/fill/completion
rings, umem, memory usage etc, from Björn.
6) Add skb context access for skb_shared_info->gso_segs field, from Eric.
7) Add support for testing flow dissector BPF programs by extending
existing BPF_PROG_TEST_RUN infrastructure, from Stanislav.
8) Split BPF kselftest's test_verifier into various subgroups of tests
in order better deal with merge conflicts in this area, from Jakub.
9) Add support for queue/stack manipulations in bpftool, from Stanislav.
10) Document BTF, from Yonghong.
11) Dump supported ELF section names in libbpf on program load
failure, from Taeung.
12) Silence a false positive compiler warning in verifier's BTF
handling, from Peter.
13) Fix help string in bpftool's feature probing, from Prashant.
14) Remove duplicate includes in BPF kselftests, from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use existing pkt_v4 and pkt_v6 to make sure flow_keys are what we want.
Also, add new bpf_flow_load routine (and flow_dissector_load.h header)
that loads bpf_flow.o program and does all required setup.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When prog array is updated with bpftool users often refer
to the map via the ID. Unfortunately, that's likely
to lead to confusion because prog arrays get flushed when
the last user reference is gone. If there is no other
reference bpftool will create one, update successfully
just to close the map again and have it flushed.
Warn about this case in non-JSON mode.
If the problem continues causing confusion we can remove
the support for referring to a map by ID for prog array
update completely. For now it seems like the potential
inconvenience to users who know what they're doing outweighs
the benefit.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Prog arrays don't have 'owner_prog_type' and 'owner_jited'
fields in their fdinfo when they are created. Those fields
are set and reported when first program is checked for
compatibility by bpf_prog_array_compatible().
This means that bpftool cannot expect the fields to always
be there. Currently trying to show maps on a system with
an un-owned prog array leads to a crash:
$ bpftool map show
389: prog_array name tail_call_map flags 0x0
Error: key 'owner_prog_type' not found in fdinfo
Error: key 'owner_jited' not found in fdinfo
key 4B value 4B max_entries 4 memlock 4096B
Segmentation fault (core dumped)
We pass a NULL pointer to atoi().
Remove the assumption that fdinfo keys are always present.
Add missing validations and remove the p_err() calls which
may lead to broken JSON output as caller will not propagate
the failure.
Fixes: 99a44bef58 ("tools: bpftool: add owner_prog_type and owner_jited to bpftool output")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It is easier to distinguish "[ OK ]" from "[FAIL]" than "[PASS]".
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As for the others, check help message output to find out if devlink
supports "resource" object.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
posix_timers fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
-DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
posix_timers.c
-o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
/tmp/cc1FTZzT.o: In function `check_timer_create':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
undefined reference to `timer_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
undefined reference to `timer_settime'
collect2: error: ld returned 1 exit status
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
reuseport_bpf_numa fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc
--sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall
-Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1
-Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c
-o
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa
/tmp/ccfUuExT.o: In function `send_from_node':
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138:
undefined reference to `numa_run_on_node'
/tmp/ccfUuExT.o: In function `main':
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230:
undefined reference to `numa_available'
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233:
undefined reference to `numa_max_node'
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libnuma.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Break up the rest of test_verifier tests into separate
files.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Break up the first 10 kLoC of test verifier test cases
out into smaller files. Looks like git line counting
gets a little flismy above 16 bit integers, so we need
two commits to break up test_verifier.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_verifier.c has grown to be very long (almost 16 kLoC),
and it is very conflict prone since we always add tests at
the end.
Try to break it apart a little bit. Allow test snippets
to be defined in separate files and include them automatically
into the huge test array.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the swapped outb() parameters in the KASLR code
- Fix the PKEY handling at fork which missed to preserve the pkey
state for the child. Comes with a test case to validate that.
- Fix the entry stack handling for XEN PV to respect that XEN PV
systems enter the function already on the current thread stack and
not on the trampoline.
- Fix kexec load failure caused by using a stale value when the
kexec_buf structure is reused for subsequent allocations.
- Fix a bogus sizeof() in the memory encryption code
- Enforce PCI dependency for the Intel Low Power Subsystem
- Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
x86/entry/64/compat: Fix stack switching for XEN PV
x86/kexec: Fix a kexec_file_load() failure
x86/mm/mem_encrypt: Fix erroneous sizeof()
x86/selftests/pkeys: Fork() to check for state being preserved
x86/pkeys: Properly copy pkey state at fork()
x86/kaslr: Fix incorrect i8254 outb() parameters
x86/intel/lpss: Make PCI dependency explicit
Steffen Klassert says:
====================
pull request (net): ipsec 2019-01-25
1) Several patches to fix the fallout from the recent
tree based policy lookup work. From Florian Westphal.
2) Fix VTI for IPCOMP for 'not compressed' IPCOMP packets.
We need an extra IPIP handler to process these packets
correctly. From Su Yanjun.
3) Fix validation of template and selector families for
MODE_ROUTEOPTIMIZATION with ipv4-in-ipv6 packets.
This can lead to a stack-out-of-bounds because
flowi4 struct is treated as flowi6 struct.
Fix from Florian Westphal.
4) Restore the default behaviour of the xfrm set-mark
in the output path. This was changed accidentally
when mark setting was extended to the input path.
From Benedict Wong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
and virtual APIC, 32-bit fixes, an important fix to restore operation on older
processors, and a bunch of hyper-v bugfixes. Several are marked stable.
There are also fixes for GCC warnings and for a GCC/objtool interaction.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcTBqRAAoJEL/70l94x66DF8wH/0LKWQd4ay54OgpfdPRcUqXa
yW10qqnO5OZfpI19UU2rfv2QXrdSOnDafgN6xiQ2Dz7m3JsZB7gBDsCCYKzeUgCz
YB0UVcX1ZS+gr3igDDHIw3lWPBUqDIzKmEJO++9nAbDi4gOmWaPQ8vWrfORWAZcl
yx2nCjeljjbO65UdRTdr3TkUNbpFlJ2NEUrzzco8OgChNB9QoxLTSJHrZxeZ7dNn
J/ZDAaBwRxXN/aKH0A3+pwUFrP5nGuronT6nGo1048WWrlQzdMp7qh8fPtTBvWJ4
uqUrrYc7jY/EhfZ4k/aAUGkAdt4IZI1KyHjhqtmB9zf+hezphUJv66QYQGVTFts=
=yUth
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Quite a few fixes for x86: nested virtualization save/restore, AMD
nested virtualization and virtual APIC, 32-bit fixes, an important fix
to restore operation on older processors, and a bunch of hyper-v
bugfixes. Several are marked stable.
There are also fixes for GCC warnings and for a GCC/objtool interaction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Mark expected switch fall-throughs
KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
KVM: selftests: check returned evmcs version range
x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
kvm: selftests: Fix region overlap check in kvm_util
kvm: vmx: fix some -Wmissing-prototypes warnings
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
svm: Fix AVIC incomplete IPI emulation
svm: Add warning message for AVIC IPI invalid target
KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
KVM: x86: Fix PV IPIs for 32-bit KVM host
x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
kvm: x86/vmx: Use kzalloc for cached_vmcs12
KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
KVM: x86: Fix single-step debugging
x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
* Fix support for NVDIMMs that implement the ACPI standard label
methods.
* Fix error handling for security overwrite (memory leak / userspace
hang condition), and another one-line security cleanup
-----BEGIN PGP SIGNATURE-----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=E4Rz
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for namespace label support for non-Intel NVDIMMs that implement
the ACPI standard label method.
This has apparently never worked and could wait for v5.1. However it
has enough visibility with hardware vendors [1] and distro bug
trackers [2], and low enough risk that I decided it should go in for
-rc4. The other fixups target the new, for v5.0, nvdimm security
functionality. The larger init path fixup closes a memory leak and a
potential userspace lockup due to missed notifications.
[1] https://github.com/pmem/ndctl/issues/78
[2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785
These have all soaked in -next for a week with no reported issues.
Summary:
- Fix support for NVDIMMs that implement the ACPI standard label
methods.
- Fix error handling for security overwrite (memory leak / userspace
hang condition), and another one-line security cleanup"
* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Fix command-supported detection
acpi/nfit: Block function zero DSMs
libnvdimm/security: Require nvdimm_security_setup_events() to succeed
nfit_test: fix security state pull for nvdimm security nfit_test
This patch enables testing some eBPF programs under sub-register
compilation mode.
Only enable this when there is BPF_JMP32 support on both LLVM and kernel.
This is because only after BPF_JMP32 added, code-gen for complex program
under sub-register mode will be clean enough to pass verification.
This patch splits TEST_GEN_FILES into BPF_OBJ_FILES and
BPF_OBJ_FILES_DUAL_COMPILE. The latter are those objects we would like to
compile for both default and sub-register mode. They are also objects used
by "test_progs".
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds unit tests for new JMP32 instructions.
This patch also added the new BPF_JMP32_REG and BPF_JMP32_IMM macros to
samples/bpf/bpf_insn.h so that JMP32 insn builders are available to tests
under 'samples' directory.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds JIT blinds support for JMP32.
Like BPF_JMP_REG/IMM, JMP32 version are needed for building raw bpf insn.
They are added to both include/linux/filter.h and
tools/include/linux/filter.h.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The cfg code need to be aware of the new JMP32 instruction class so it
could partition functions correctly.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new eBPF instruction class JMP32 uses the reserved class number 0x6.
Kernel BPF ISA documentation updated accordingly.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds several changes to the ip_defrag selftest, to cover
new IPv6 defrag behavior:
- min IPv6 frag size is now 8 instead of 1280
- new test cases to cover IPv6 defragmentation in nf_conntrack_reasm.c
- new "permissive" mode in negative (overlap) tests: netfilter
sometimes drops invalid packets without passing them to IPv6
underneath, and thus defragmentation sometimes succeeds when
it is expected to fail; so the permissive mode does not fail the
test if the correct reassembled datagram is received instead of a
timeout.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As suggested by Ingo, this header file might benefit other tools than
just rcutorture. For now it's quite limited, but is easy to extend, so
exposing it into tools/include/nolibc/ will make it much easier to
adopt by other tools.
The mkinitrd.sh script in rcutorture was updated to use this new location.
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Ingo rightfully asked for a bit more documentation in the nolibc header,
so this patch adds some explanation about its purpose, how it's made, and
how to use it.
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
A few macros had their rightmost backslash misaligned, and the pollfd
struct definition resisted the previous code reindent. Nothing else
changed.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
A last-minute checkpatch cleanup caused most of list of clobbered
registers to be lost in the MIPS syscall definition. Although this code
is not yet used on MIPS, it is nevertheless better to fix it before it
does get used.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Why a Bourne-shell "for" loop? And why 192 instances of "a"? This commit
adds a shell comment to present the answer to these mysteries. It also
uses a series of factor-of-four Bourne-shell assignments to make it
easy to see how many instances there are, replacing the earlier wall of
'a' characters.
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
[ paulmck: Fix wrong-variable bugs noted by Andrea Parri. ]
Passing EPERM during syscall skipping was confusing since the test wasn't
actually exercising the errno evaluation -- it was just passing a literal
"1" (EPERM). Instead, expand the tests to check both direct value returns
(positive, 45000 in this case), and errno values (negative, -ESRCH in this
case) to check both fake success and fake failure during syscall skipping.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: a33b2d0359 ("selftests/seccomp: Add tests for basic ptrace actions")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
When the system lirc.h is older than v4.16, you will get errors like:
ir_loopback.c:32:16: error: field ‘proto’ has incomplete type
enum rc_proto proto;
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
The cpu-hotplug test assumes that we can offline the maximum CPU as
described by /sys/devices/system/cpu/offline. However, in the case
where the number of CPUs exceeds like kernel configuration then
the offline count can be greater than the present count and we end
up trying to test the offlining of a CPU that is not available to
offline. Fix this by testing the maximum present CPU instead.
Also, the test currently offlines the CPU and does not online it,
so fix this by onlining the CPU after the test.
Fixes: d89dffa976 ("fault-injection: add selftests for cpu and memory hotplug")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Check that KVM_CAP_HYPERV_ENLIGHTENED_VMCS returns correct version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.
Tested: Compiled tools/testing/selftests/kvm with -static
Ran all resulting test binaries on an Intel Haswell test machine
All tests passed
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Where we don't have "raw_syscalls:sys_enter", so we need to look for a
"*syscalls:sys_enter*" to initialize the offsets for the
__augmented_syscalls__ evsel, which is the case with etcsnoop, that was
segfaulting, fixed:
# trace -e /home/acme/git/perf/tools/perf/examples/bpf/etcsnoop.c
0.000 ( ): gnome-shell/2105 openat(dfd: CWD, filename: "/etc/localtime") ...
631.834 ( ): cat/6521 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC) ...
632.637 ( ): bash/6521 openat(dfd: CWD, filename: "/etc/passwd") ...
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: b9b6a2ea2b ("perf trace: Do not hardcode the size of the tracepoint common_ fields")
Link: https://lkml.kernel.org/n/tip-0tjwcit8qitsmh4nyvf2b0jo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the code more compact and also paving the way to have the BTF
annotation to be done transparently.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-pjlf38sv3i1hbn5vzkr4y3ol@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First user, pid_t as the type, lets see how this goes with the BTF
routines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-56eplvf86r69wt3p35nh805z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the declaration of maps more compact, the following patches will
make use of it.
Standardizing on it will allow to add the BTF details, i.e.
BPF_ANNOTATE_KV_PAIR() (tools/testing/selftests/bpf/bpf_helpers.h)
transparently.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-h3q9rxxkbzetgnbro5rclqft@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in tests/attr.py
The use of "except as" syntax implies the minimum supported Python2 version is
now v2.6
Committer testing:
$ make -C tools/perf PYTHON3=python install-bin
Before:
# perf test attr
16: Setup struct perf_event_attr : FAILED!
48: Synthesize attr update : Ok
[root@quaco ~]# perf test -v attr
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 3121
File "/home/acme/libexec/perf-core/tests/attr.py", line 324
except Unsup, obj:
^
SyntaxError: invalid syntax
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
48: Synthesize attr update :
--- start ---
test child forked, pid 3124
test child finished with 0
---- end ----
Synthesize attr update: Ok
#
After:
# perf test attr
16: Setup struct perf_event_attr : Ok
48: Synthesize attr update : Ok
#
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The scripts in scripts/python are intended to be run from 'perf script'
and the Python version used is dictated by how perf was built (PYTHON=).
Also most distros follow pep-0394 which recommends that /usr/bin/python
refer to Python2 and so may not exist on the system (if PYTHON=python3).
- Remove the explicit shebang
- Install the scripts as mode 644
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-6-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tests/attr.c invokes attr.py via an explicit invocation of Python
($PYTHON) so there is therefore no need for an explicit shebang.
Also most distros follow pep-0394 which recommends that /usr/bin/python
refer only to v2 and so may not exist on the system (if PYTHON=python3).
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-5-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Makefile.perf invokes setup.py via an explicit invocation of python
(PYTHON_WORD) so there is therefore no need for an explicit shebang.
Also most distros follow pep-0394 which recommends that /usr/bin/python
refer only to v2 and so may not exist on the system (if PYTHON=python3).
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-4-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With Python3. PyUnicode_FromStringAndSize is unsafe to call on attr and will
return NULL. Use _PyBytes_FromStringAndSize (as with raw_buf).
Below is the observed behavior without the fix. Note it is first necessary
to apply the prior fix (Add trace_context extension module to sys,modules):
# ldd /usr/bin/perf | grep -i python
libpython3.6m.so.1.0 => /usr/lib64/libpython3.6m.so.1.0 (0x00007f8e1dfb2000)
# perf record -e raw_syscalls:sys_enter /bin/false
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (21 samples) ]
# perf script -g python | cat
generated Python script: perf-script.py
# perf script -s ./perf-script.py
in trace_begin
Segmentation fault (core dumped)
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Fixes: 66dfdff03d ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20190124005229.16146-3-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In Python3, the result of PyModule_Create (called from
scripts/python/Perf-Trace-Util/Context.c) is not automatically added to
sys.modules. See: https://bugs.python.org/issue4592
Below is the observed behavior without the fix:
# ldd /usr/bin/perf | grep -i python
libpython3.6m.so.1.0 => /usr/lib64/libpython3.6m.so.1.0 (0x00007f8e1dfb2000)
# perf record /bin/false
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data (17 samples) ]
# perf script -g python | cat
generated Python script: perf-script.py
# perf script -s ./perf-script.py
Traceback (most recent call last):
File "./perf-script.py", line 18, in <module>
from perf_trace_context import *
ModuleNotFoundError: No module named 'perf_trace_context'
Error running python script ./perf-script.py
#
Committer notes:
To build with python3 use:
$ make -C tools/perf PYTHON=python3
Use a non-const variable to pass the 'name' arg to
PyImport_AppendInittab(), as python2.6 has that as 'char *', which ends
up trowing this in some environments:
CC /tmp/build/perf/util/parse-branch-options.o
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1520:2: error: passing argument 1 of 'PyImport_AppendInittab' discards 'const' qualifier from pointer target type [-Werror]
PyImport_AppendInittab("perf_trace_context", initfunc);
^
In file included from /usr/include/python2.6/Python.h:130:0,
from util/scripting-engines/trace-event-python.c:22:
/usr/include/python2.6/import.h:54:17: note: expected 'char *' but argument is of type 'const char *'
PyAPI_FUNC(int) PyImport_AppendInittab(char *name, void (*initfunc)(void));
^
cc1: all warnings being treated as errors
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Fixes: 66dfdff03d ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20190124005229.16146-2-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Added missing machine->id_hdr_size to event->header.size. Also fixed
size of PERF_RECORD_KSYMBOL by removing extra bytes for name.
Committer notes:
We need to malloc that extra machine->id_hdr_size at the start of
perf_event__synthesize_bpf_events() and also need to cast the event to
(void *) otherwise we segfault, fix it.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Fixes: 7b612e291a ("perf tools: Synthesize PERF_RECORD_* for loaded BPF programs")
Link: http://lkml.kernel.org/r/20190122210218.358664-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the cost of an extra pointer, we can avoid the O(logN) cost of
finding the first element in the tree (smallest node), which is
something heavily required for perf-sched.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-8-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the cost of an extra pointer, we can avoid the O(logN) cost of
finding the first element in the tree (smallest node), which is
something heavily required for histograms. Specifically, the following
are converted to rb_root_cached, and users accordingly:
hist::entries_in_array
hist::entries_in
hist::entries
hist::entries_collapsed
hist_entry::hroot_in
hist_entry::hroot_out
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net
[ Added some missing conversions to rb_first_cached() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the cost of an extra pointer, we can avoid the O(logN) cost of
finding the first element in the tree (smallest node).
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-6-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the cost of an extra pointer, we can avoid the O(logN) cost of
finding the first element in the tree (smallest node), which is
something required for any of the strlist or intlist traversals
(XXX_for_each_entry()). There are a number of users in perf of these
(particularly strlists), including probes, and buildid.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-5-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the cost of an extra pointer, we can avoid the O(logN) cost of
finding the first element in the tree (smallest node), which is
something required for nearly every in/srcline callchain node deletion
(in/srcline__tree_delete()).
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-4-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the cost of an extra pointer, we can avoid the O(logN) cost of
finding the first element in the tree (smallest node), which is
something required for nearly every operation dealing with
machine->guests and threads->entries.
The conversion is straightforward, however, it's worth noticing that the
rb_erase_init() calls have been replaced by rb_erase_cached() which has
no _init() flavor, however, the node is explicitly cleared next anyway,
which was redundant until now.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-3-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There have been a number of changes in the kernel's rbrtee
implementation, including loose lockless searching guarantees and
rb_root_cached, which later patches will use as an optimization.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-2-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There we don't need rbtree, only in comm.c, also ditch perf.h, not
needed at all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-vr1jnwwujh99skrgldtimpmu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There we need just forward declarations, so remove it and add it just on
the .c files that actually touch the struct definitions.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wsjxzt99p83jubt6hu0med0f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And fixup the fallout in places like annotation and jitdump that were
using things like dirname() but weren't including libgen.h, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wrii9hy1a1wathc0398f9fgt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disentangling the dependency tree, to reduce build time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-n2gcrfmh480rm44p7fra13vv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some are being obtained indirectly and as we prune unnecessary includes,
this stops working, fix it by adding the headers for things used in
these file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-1p65lyeebc2ose0lbozvemda@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already have it, move those there from events.h so that we untangle
the header dependencies a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pnbkqo8jxbi49d4f3yd3b5w3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the chances changes trigger tons of rebuilds, more to come.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ytbykaku63862guk7muflcy4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't drag all the headers included in symbol.h when needing
to access symbol_conf in another header, such as annotate.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-rvo9dzflkneqmprb0dgbfybx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was getting the va_list definition by luck.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4mavb7pgt2nw9lsew1xuez09@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
$ make -s -C tools/testing/selftests/bpf
readelf: Error: Missing knowledge of 32-bit reloc types used in DWARF
sections of machine number 247
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 1 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info
After:
$ make -s -C tools/testing/selftests/bpf
v2:
* use llvm-readelf instead of redirecting binutils' readelf stderr to
/dev/null
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds the ability to read gso_segs from a BPF program.
v3: Use BPF_REG_AX instead of BPF_REG_TMP for the temporary register,
as suggested by Martin.
v2: refined Eddie Hao patch to address Alexei feedback.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eddie Hao <eddieh@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When 'bpftool feature' is executed it shows incorrect help string.
test# bpftool feature
Usage: bpftool bpftool probe [COMPONENT] [macros [prefix PREFIX]]
bpftool bpftool help
COMPONENT := { kernel | dev NAME }
Instead of fixing the help text by tweaking argv[] indices, this
patch changes the default action to 'probe'. It makes the behavior
consistent with other subcommands, where first subcommand without
extra parameter results in 'show' action.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add tests for newly added dead code elimination. Both verifier
and BTF tests are added. BTF test infrastructure has to be
extended to be able to account for line info which is eliminated
during dead code removal.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
system() is calling shell which should find the appropriate full path
via $PATH. On some systems, full path to iptables and/or nc might be
different that we one we have hardcoded.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We need to let users check their wrong ELF section name with proper
ELF section names when they fail to get a prog/attach type from it.
Because users can't realize libbpf guess prog/attach types from given
ELF section names. For example, when a 'cgroup' section name of a
BPF program is used, show available ELF section names(types).
Before:
$ bpftool prog load bpf-prog.o /sys/fs/bpf/prog1
Error: failed to guess program type based on ELF section name cgroup
After:
libbpf: failed to guess program type based on ELF section name 'cgroup'
libbpf: supported section(type) names are: socket kprobe/ kretprobe/ classifier action tracepoint/ raw_tracepoint/ xdp perf_event lwt_in lwt_out lwt_xmit lwt_seg6local cgroup_skb/ingress cgroup_skb/egress cgroup/skb cgroup/sock cgroup/post_bind4 cgroup/post_bind6 cgroup/dev sockops sk_skb/stream_parser sk_skb/stream_verdict sk_skb sk_msg lirc_mode2 flow_dissector cgroup/bind4 cgroup/bind6 cgroup/connect4 cgroup/connect6 cgroup/sendmsg4 cgroup/sendmsg6
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When updating a percpu map, bpftool currently copies the provided
value only into the first per CPU copy of the specified value,
all others instances are left zeroed.
This change explicitly copies the user-provided bytes to all the
per CPU instances, keeping the sub-command syntax unchanged.
v2 -> v3:
- drop unused argument, as per Quentin's suggestion
v1 -> v2:
- rename the helper as per Quentin's suggestion
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Lance reported an issue with bpftool not being able to
dump program if there are more programs loaded and you
want to dump any but the first program, like:
# bpftool prog
28: kprobe name trace_req_start tag 1dfc28ba8b3dd597 gpl
loaded_at 2019-01-18T17:02:40+1100 uid 0
xlated 112B jited 109B memlock 4096B map_ids 13
29: kprobe name trace_req_compl tag 5b6a5ecc6030a683 gpl
loaded_at 2019-01-18T17:02:40+1100 uid 0
xlated 928B jited 575B memlock 4096B map_ids 13,14
# bpftool prog dum jited tag 1dfc28ba8b3dd597
0: push %rbp
1: mov %rsp,%rbp
...
# bpftool prog dum jited tag 5b6a5ecc6030a683
Error: can't get prog info (29): Bad address
The problem is in the prog_fd_by_tag function not cleaning
the struct bpf_prog_info before another request, so the
previous program length is still in there and kernel assumes
it needs to dump the program, which fails because there's no
user pointer set.
Moving the struct bpf_prog_info declaration into the loop,
so it gets cleaned before each query.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add the bash completion related to the newly introduced "bpftool feature
probe" command.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpftool gained support for probing the current system in order to see
what program and map types, and what helpers are available on that
system. This patch adds the possibility to pass an interface index to
libbpf (and hence to the kernel) when trying to load the programs or to
create the maps, in order to see what items a given network device can
support.
A new keyword "dev <ifname>" can be used as an alternative to "kernel"
to indicate that the given device should be tested. If no target ("dev"
or "kernel") is specified bpftool defaults to probing the kernel.
Sample output:
# bpftool -p feature probe dev lo
{
"syscall_config": {
"have_bpf_syscall": true
},
"program_types": {
"have_sched_cls_prog_type": false,
"have_xdp_prog_type": false
},
...
}
As the target is a network device, /proc/ parameters and kernel
configuration are NOT dumped. Availability of the bpf() syscall is
still probed, so we can return early if that syscall is not usable
(since there is no point in attempting the remaining probes in this
case).
Among the program types, only the ones that can be offloaded are probed.
All map types are probed, as there is no specific rule telling which one
could or could not be supported by a device in the future. All helpers
are probed (but only for offload-able program types).
Caveat: as bpftool does not attempt to attach programs to the device at
the moment, probes do not entirely reflect what the device accepts:
typically, for Netronome's nfp, results will announce that TC cls
offload is available even if support has been deactivated (with e.g.
ethtool -K eth1 hw-tc-offload off).
v2:
- All helpers are probed, whereas previous version would only probe the
ones compatible with an offload-able program type. This is because we
do not keep a default compatible program type for each helper anymore.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make bpftool able to dump a subset of the parameters collected by
probing the system as a listing of C-style #define macros, so that
external projects can reuse the result of this probing and build
BPF-based project in accordance with the features available on the
system.
The new "macros" keyword is used to select this output. An additional
"prefix" keyword is added so that users can select a custom prefix for
macro names, in order to avoid any namespace conflict.
Sample output:
# bpftool feature probe kernel macros prefix FOO_
/*** System call availability ***/
#define FOO_HAVE_BPF_SYSCALL
/*** eBPF program types ***/
#define FOO_HAVE_SOCKET_FILTER_PROG_TYPE
#define FOO_HAVE_KPROBE_PROG_TYPE
#define FOO_HAVE_SCHED_CLS_PROG_TYPE
...
/*** eBPF map types ***/
#define FOO_HAVE_HASH_MAP_TYPE
#define FOO_HAVE_ARRAY_MAP_TYPE
#define FOO_HAVE_PROG_ARRAY_MAP_TYPE
...
/*** eBPF helper functions ***/
/*
* Use FOO_HAVE_PROG_TYPE_HELPER(prog_type_name, helper_name)
* to determine if <helper_name> is available for <prog_type_name>,
* e.g.
* #if FOO_HAVE_PROG_TYPE_HELPER(xdp, bpf_redirect)
* // do stuff with this helper
* #elif
* // use a workaround
* #endif
*/
#define FOO_HAVE_PROG_TYPE_HELPER(prog_type, helper) \
FOO_BPF__PROG_TYPE_ ## prog_type ## __HELPER_ ## helper
...
#define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_probe_read 0
#define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_ktime_get_ns 1
#define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_trace_printk 1
...
v3:
- Change output for helpers again: add a
HAVE_PROG_TYPE_HELPER(type, helper) macro that can be used to tell
if <helper> is available for program <type>.
v2:
- #define-based output added as a distinct patch.
- "HAVE_" prefix appended to macro names.
- Output limited to bpf() syscall availability, BPF prog and map types,
helper functions. In this version kernel config options, procfs
parameter or kernel version are intentionally left aside.
- Following the change on helper probes, format for helper probes in
this output style has changed (now a list of compatible program
types).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similarly to what was done for program types and map types, add a set of
probes to test the availability of the different eBPF helper functions
on the current system.
For each known program type, all known helpers are tested, in order to
establish a compatibility matrix. Output is provided as a set of lists
of available helpers, one per program type.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF helper functions...
eBPF helpers supported for program type socket_filter:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
eBPF helpers supported for program type kprobe:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
# bpftool --json --pretty feature probe kernel
{
...
"helpers": {
"socket_filter_available_helpers": ["bpf_map_lookup_elem", \
"bpf_map_update_elem","bpf_map_delete_elem", ...
],
"kprobe_available_helpers": ["bpf_map_lookup_elem", \
"bpf_map_update_elem","bpf_map_delete_elem", ...
],
...
}
}
v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.
v4:
- Use "enum bpf_func_id" instead of "__u32" in bpf_probe_helper()
declaration for the type of the argument used to pass the id of
the helper to probe.
- Undef BPF_HELPER_MAKE_ENTRY after using it.
v3:
- Do not pass kernel version from bpftool to libbpf probes (kernel
version for testing program with kprobes is retrieved directly from
libbpf).
- Dump one list of available helpers per program type (instead of one
list of compatible program types per helper).
v2:
- Move probes from bpftool to libbpf.
- Test all program types for each helper, print a list of working prog
types for each helper.
- Fall back on include/uapi/linux/bpf.h for names and ids of helpers.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new probes for eBPF map types, to detect what are the ones available
on the system. Try creating one map of each type, and see if the kernel
complains.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF map types...
eBPF map_type hash is available
eBPF map_type array is available
eBPF map_type prog_array is available
...
# bpftool --json --pretty feature probe kernel
{
...
"map_types": {
"have_hash_map_type": true,
"have_array_map_type": true,
"have_prog_array_map_type": true,
...
}
}
v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.
v3:
- Use a switch with all enum values for setting specific map parameters,
so that gcc complains at compile time (-Wswitch-enum) if new map types
were added to the kernel but libbpf was not updated.
v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce probes for supported BPF program types in libbpf, and call it
from bpftool to test what types are available on the system. The probe
simply consists in loading a very basic program of that type and see if
the verifier complains or not.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF program types...
eBPF program_type socket_filter is available
eBPF program_type kprobe is available
eBPF program_type sched_cls is available
...
# bpftool --json --pretty feature probe kernel
{
...
"program_types": {
"have_socket_filter_prog_type": true,
"have_kprobe_prog_type": true,
"have_sched_cls_prog_type": true,
...
}
}
v5:
- In libbpf.map, move global symbol to a new LIBBPF_0.0.2 section.
- Rename (non-API function) prog_load() as probe_load().
v3:
- Get kernel version for checking kprobes availability from libbpf
instead of from bpftool. Do not pass kernel_version as an argument
when calling libbpf probes.
- Use a switch with all enum values for setting specific program
parameters just before probing, so that gcc complains at compile time
(-Wswitch-enum) if new prog types were added to the kernel but libbpf
was not updated.
- Add a comment in libbpf.h about setrlimit() usage to allow many
consecutive probe attempts.
v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add probes to dump a number of options set (or not set) for compiling
the kernel image. These parameters provide information about what BPF
components should be available on the system. A number of them are not
directly related to eBPF, but are in fact used in the kernel as
conditions on which to compile, or not to compile, some of the eBPF
helper functions.
Sample output:
# bpftool feature probe kernel
Scanning system configuration...
...
CONFIG_BPF is set to y
CONFIG_BPF_SYSCALL is set to y
CONFIG_HAVE_EBPF_JIT is set to y
...
# bpftool --pretty --json feature probe kernel
{
"system_config": {
...
"CONFIG_BPF": "y",
"CONFIG_BPF_SYSCALL": "y",
"CONFIG_HAVE_EBPF_JIT": "y",
...
}
}
v5:
- Declare options[] array in probe_kernel_image_config() as static.
v4:
- Add some options to the list:
- CONFIG_TRACING
- CONFIG_KPROBE_EVENTS
- CONFIG_UPROBE_EVENTS
- CONFIG_FTRACE_SYSCALLS
- Add comments about those options in the source code.
v3:
- Add a comment about /proc/config.gz not being supported as a path for
the config file at this time.
- Use p_info() instead of p_err() on failure to get options from config
file, as bpftool keeps probing other parameters and that would
possibly create duplicate "error" entries for JSON.
v2:
- Remove C-style macros output from this patch.
- NOT addressed: grouping of those config options into subsections
(I don't see an easy way of grouping them at the moment, please see
also the discussion on v1 thread).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a set of probes to dump the eBPF-related parameters available from
/proc/: availability of bpf() syscall for unprivileged users,
JIT compiler status and hardening status, kallsyms exports status.
Sample output:
# bpftool feature probe kernel
Scanning system configuration...
bpf() syscall for unprivileged users is enabled
JIT compiler is disabled
JIT compiler hardening is disabled
JIT compiler kallsyms exports are disabled
Global memory limit for JIT compiler for unprivileged users \
is 264241152 bytes
...
# bpftool --json --pretty feature probe kernel
{
"system_config": {
"unprivileged_bpf_disabled": 0,
"bpf_jit_enable": 0,
"bpf_jit_harden": 0,
"bpf_jit_kallsyms": 0,
"bpf_jit_limit": 264241152
},
...
}
These probes are skipped if procfs is not mounted.
v4:
- Add bpf_jit_limit parameter.
v2:
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new component and command for bpftool, in order to probe the
system to dump a set of eBPF-related parameters so that users can know
what features are available on the system.
Parameters are dumped in plain or JSON output (with -j/-p options).
The current patch introduces probing of one simple parameter:
availability of the bpf() system call. Later commits
will add other probes.
Sample output:
# bpftool feature probe kernel
Scanning system call availability...
bpf() syscall is available
# bpftool --json --pretty feature probe kernel
{
"syscall_config": {
"have_bpf_syscall": true
}
}
The optional "kernel" keyword enforces probing of the current system,
which is the only possible behaviour at this stage. It can be safely
omitted.
The feature comes with the relevant man page, but bash completion will
come in a dedicated commit.
v3:
- Do not probe kernel version. Contrarily to what is written below for
v2, we can have the kernel version retrieved in libbpf instead of
bpftool (in the patch adding probing for program types).
v2:
- Remove C-style macros output from this patch.
- Even though kernel version is no longer needed for testing kprobes
availability, note that we still collect it in this patch so that
bpftool gets able to probe (in next patches) older kernels as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ARP suppression allows the Linux bridge to answer ARP requests on behalf
of remote hosts. It reduces the amount of packets a VTEP needs to flood.
This test verifies that ARP suppression on / off works when a neighbour
exists and when it does not exist. It does so by sending an ARP request
from a host connected to one VTEP and checking whether it was received
by a second VTEP.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a similar fashion to the asymmetric test, add a test for symmetric
routing. In symmetric routing both the ingress and egress VTEPs perform
routing in the overlay network into / from the VXLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI. Different tenants
(VRFs) use different L3 VNIs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify that ARP packets are correctly decapsulated by the ingress VTEP
by removing the neighbours configured on both VLAN interfaces and
running a ping test.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In asymmetric routing the ingress VTEP routes the packet into the
correct VXLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.
The test uses a simple topology with two VTEPs and two VNIs and verifies
that ping passes between hosts (local / remote) in the same VLAN (VNI)
and in different VLANs belonging to the same tenant (VRF).
While the test does not check VM mobility, it does configure an anycast
gateway using a macvlan device on both VTEPs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This Kselftest update for Linux 5.0-rc4 consists of fixes to rtc, seccomp
and other tests.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAlxHTz0ACgkQCwJExA0N
Qxzt9hAAutAJagSuFROtzJN//x7oGQl5v1DnbLERI388vK4a+vL3bEsHh7QRlUbe
x3mu6PZCQ/kFl5f7mrICuBPRWxSJA4rDVGeLWJlKUKqoB/rW/W1bvCBVPXCO2XMc
FLxAXDd/bL/NsDOBJUjkk1mHYcfmB8dqPlLZM/ArbZbQLRBKXocTP7VclNtrZmgJ
vIB3WU+JfgW4Bx8DlkZbiWohe+vazfDYbBoYMmh4OrCwuxOZL0T6cAd3qddCoP/N
SOpryfCMHN8TX5f3L+BFqkF2vk7EbKRGxVW1bOJ9SXIN1/XCKTp9/VqVrryJ4Dx2
Hf6YNnoRGGphFErJ+9IRF3qLWxObkHYRWwKL4ZEqkB7VxIHNqpfYO9t5H8lhzFoy
rhSQM0a9UNoCplKfzsLx5uRGC+/dPPVDCashF6grpqws3nDBIYwTdN3bdtYBkhjL
V1AYslysX+frxzTtPdRvJI2w8Y7BUjRBjuFkXJxTsfPzyPa/oyIx8QEP1yifTJu4
4ijfsZbmSoCynCK9ckw7DL2IOLHUrVbr2jldPsbPROo+Vy0nDhILbvbm+bYQXchM
OmBRnX9NbWLrnI3ZeF4tuKbz1R4Ax/Z1qRWzZoKo9V469l5wSTkYHkZFPcmwNWyo
vvSSJ0YmtKkLclrT4/GYvL2qVYXAGFy2HV44Ag5S3b+KehkIZFI=
=xk1L
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to rtc, seccomp and other tests"
* tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/seccomp: Abort without user notification support
selftests: gpio-mockup-chardev: Check asprintf() for error
selftests: seccomp: use LDLIBS instead of LDFLAGS
selftests/vm/gup_benchmark.c: match gup struct to kernel
tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate header
x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded"
selftests: rtc: rtctest: add alarm test on minute boundary
selftests: rtc: rtctest: fix alarm tests
Kernel:
Stephane Eranian:
- Fix perf_proc_update_handler() bug.
perf script:
Andi Kleen:
- Fix crash with printing mixed trace point and other events.
Tony Jones:
- Fix crash when processing recorded stat data.
perf top:
He Kuang:
- Fix wrong hottest instruction highlighted.
perf python:
Arnaldo Carvalho de Melo:
- Remove -fstack-clash-protection when building with some clang versions.
perf ordered_events:
Jiri Olsa:
- Fix out of buffers crash in ordered_events__free().
perf cpu_map:
Stephane Eranian:
- Handle TOPOLOGY headers with no CPU.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXEYQMgAKCRCyPKLppCJ+
J/pYAP0c+6frwxCAll72bigi+/+5t+1kc/zpM5jNgt97moGh2AD+KKrN5h4E0Z/J
g5T2FOpiwB4cxpVjYTVRchDlx9JohgA=
=X2zj
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.0-20190121' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
Kernel:
Stephane Eranian:
- Fix perf_proc_update_handler() bug.
perf script:
Andi Kleen:
- Fix crash with printing mixed trace point and other events.
Tony Jones:
- Fix crash when processing recorded stat data.
perf top:
He Kuang:
- Fix wrong hottest instruction highlighted.
perf python:
Arnaldo Carvalho de Melo:
- Remove -fstack-clash-protection when building with some clang versions.
perf ordered_events:
Jiri Olsa:
- Fix out of buffers crash in ordered_events__free().
perf cpu_map:
Stephane Eranian:
- Handle TOPOLOGY headers with no CPU.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To untangle objects a bit more, avoiding rebuilding the color_fprintf
routines when changes are made to the perf config headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/n/tip-8qvu2ek26antm3a8jyl4ocbq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These options are not present in some (all?) clang versions, so when we
build for a distro that has a gcc new enough to have these options and
that the distro python build config settings use them but clang doesn't
support, b00m.
This is the case with fedora rawhide (now gearing towards f30), so check
if clang has the and remove the missing ones from CFLAGS.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5q50q9w458yawgxf9ez54jbp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can resolve symbols and map names.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-9-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds basic handling of PERF_RECORD_BPF_EVENT. Tracking of
PERF_RECORD_BPF_EVENT is OFF by default. Option --bpf-event is added to
turn it on.
Committer notes:
Add dummy machine__process_bpf_event() variant that returns zero for
systems without HAVE_LIBBPF_SUPPORT, such as Alpine Linux, unbreaking
the build in such systems.
Remove the needless include <machine.h> from bpf->event.h, provide just
forward declarations for the structs and unions in the parameters, to
reduce compilation time and needless rebuilds when machine.h gets
changed.
Committer testing:
When running with:
# perf record --bpf-event
On an older kernel where PERF_RECORD_BPF_EVENT and PERF_RECORD_KSYMBOL
is not present, we fallback to removing those two bits from
perf_event_attr, making the tool to continue to work on older kernels:
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 5779 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -22
switching off bpf_event
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
------------------------------------------------------------
sys_perf_event_open: pid 5779 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -22
switching off ksymbol
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
And then proceeds to work without those two features.
As passing --bpf-event is an explicit action performed by the user, perhaps we
should emit a warning telling that the kernel has no such feature, but this can
be done on top of this patch.
Now with a kernel that supports these events, start the 'record --bpf-event -a'
and then run 'perf trace sleep 10000' that will use the BPF
augmented_raw_syscalls.o prebuilt (for another kernel version even) and thus
should generate PERF_RECORD_BPF_EVENT events:
[root@quaco ~]# perf record -e dummy -a --bpf-event
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.713 MB perf.data ]
[root@quaco ~]# bpftool prog
13: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2019-01-19T09:09:43-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 13,14
14: cgroup_skb tag 2a142ef67aaad174 gpl
loaded_at 2019-01-19T09:09:43-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 13,14
15: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2019-01-19T09:09:43-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 15,16
16: cgroup_skb tag 2a142ef67aaad174 gpl
loaded_at 2019-01-19T09:09:43-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 15,16
17: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2019-01-19T09:09:44-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 17,18
18: cgroup_skb tag 2a142ef67aaad174 gpl
loaded_at 2019-01-19T09:09:44-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 17,18
21: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2019-01-19T09:09:45-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 21,22
22: cgroup_skb tag 2a142ef67aaad174 gpl
loaded_at 2019-01-19T09:09:45-0300 uid 0
xlated 296B jited 229B memlock 4096B map_ids 21,22
31: tracepoint name sys_enter tag 12504ba9402f952f gpl
loaded_at 2019-01-19T09:19:56-0300 uid 0
xlated 512B jited 374B memlock 4096B map_ids 30,29,28
32: tracepoint name sys_exit tag c1bd85c092d6e4aa gpl
loaded_at 2019-01-19T09:19:56-0300 uid 0
xlated 256B jited 191B memlock 4096B map_ids 30,29
# perf report -D | grep PERF_RECORD_BPF_EVENT | nl
1 0 55834574849 0x4fc8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 13
2 0 60129542145 0x5118 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 14
3 0 64424509441 0x5268 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 15
4 0 68719476737 0x53b8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 16
5 0 73014444033 0x5508 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 17
6 0 77309411329 0x5658 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 18
7 0 90194313217 0x57a8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 21
8 0 94489280513 0x58f8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 22
9 7 620922484360 0xb6390 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 29
10 7 620922486018 0xb6410 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 2, flags 0, id 29
11 7 620922579199 0xb6490 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 30
12 7 620922580240 0xb6510 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 2, flags 0, id 30
13 7 620922765207 0xb6598 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 31
14 7 620922874543 0xb6620 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 32
#
There, the 31 and 32 tracepoint BPF programs put in place by 'perf trace'.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-7-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch handles PERF_RECORD_KSYMBOL in perf record/report.
Specifically, map and symbol are created for ksymbol register, and
removed for ksymbol unregister.
This patch also sets perf_event_attr.ksymbol properly. The flag is ON by
default.
Committer notes:
Use proper inttypes.h for u64, fixing the build in some environments
like in the android NDK r15c targetting ARM 32-bit.
I.e. fixing this build error:
util/event.c: In function 'perf_event__fprintf_ksymbol':
util/event.c:1489:10: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format=]
event->ksymbol_event.flags, event->ksymbol_event.name);
^
cc1: all warnings being treated as errors
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-6-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the original mode of operation it isn't needed, since we report back
errors via PERF_RECORD_LOST records in the ring buffer, but for use in
bpf_perf_event_output() it is convenient to return the errors, basically
-ENOSPC.
Currently bpf_perf_event_output() returns an error indication, the last
thing it does, which is to push it to the ring buffer is that can fail
and if so, this failure won't be reported back to its users, fix it.
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20190118150938.GN5823@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the new s390 PMU device cpum_cf_diag to extract the
counter set diagnostic data. This data is available as event raw data
and can be created with this command:
[root@s35lp76 perf]# ./perf record -R -e '{rbd000,rbc000}' --
~/mytests/facultaet 2500
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.009 MB perf.data ]
[root@s35lp76 perf]#
The new event 0xbc000 generated this counter set diagnostic trace data.
The data can be extracted using command:
[root@s35lp76 perf]# ./perf report --stdio --itrace=d
#
# Total Lost Samples: 0
#
# Samples: 21 of events 'anon group { rbd000, rbc000 }'
# Event count (approx.): 21
#
# Overhead Command Shared Object Symbol
# ................ ......... ................. ........................
#
80.95% 0.00% facultaet facultaet [.] facultaet
4.76% 0.00% facultaet [kernel.kallsyms] [k] check_chain_key
4.76% 0.00% facultaet [kernel.kallsyms] [k] ftrace_likely_update
4.76% 0.00% facultaet [kernel.kallsyms] [k] lock_release
4.76% 0.00% facultaet libc-2.26.so [.] _dl_addr
[root@s35lp76 perf]# ll aux*
-rw-r--r-- 1 root root 3408 Oct 16 12:40 aux.ctr.02
-rw-r--r-- 1 root root 4096 Oct 16 12:40 aux.smp.02
[root@s35lp76 perf]#
The files named aux.ctr.## contain the counter set diagnostic data and
the files named aux.smp.## contain the sampling diagnostic data. ##
stand for the CPU number the data was taken from.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190117093003.96287-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 the event bc000 (also named CF_DIAG) extracts the CPU
Measurement Facility diagnostic counter sets and displays them as
counter number and counter value pairs sorted by counter set number.
Output:
[root@s35lp76 perf]# ./perf report -D --stdio
[00000000] Counterset:0 Counters:6
Counter:000 Value:0x000000000085ec36 Counter:001 Value:0x0000000000796c94
Counter:002 Value:0x0000000000005ada Counter:003 Value:0x0000000000092460
Counter:004 Value:0x0000000000006073 Counter:005 Value:0x00000000001a9a73
[0x000038] Counterset:1 Counters:2
Counter:000 Value:0x000000000007c59f Counter:001 Value:0x000000000002fad6
[0x000050] Counterset:2 Counters:16
Counter:000 Value:000000000000000000 Counter:001 Value:000000000000000000
Counter:002 Value:000000000000000000 Counter:003 Value:000000000000000000
Counter:004 Value:000000000000000000 Counter:005 Value:000000000000000000
Counter:006 Value:000000000000000000 Counter:007 Value:000000000000000000
Counter:008 Value:000000000000000000 Counter:009 Value:000000000000000000
Counter:010 Value:000000000000000000 Counter:011 Value:000000000000000000
Counter:012 Value:000000000000000000 Counter:013 Value:000000000000000000
Counter:014 Value:000000000000000000 Counter:015 Value:000000000000000000
[0x0000d8] Counterset:3 Counters:128
Counter:000 Value:0x000000000000020f Counter:001 Value:0x00000000000001d8
Counter:002 Value:0x000000000000d7fa Counter:003 Value:0x000000000000008b
...
The number in brackets is the offset into the raw data field of the
sample.
New functions trace_event_sample_raw__init() and s390_sample_raw() are
introduced in the code path to enable interpretation on non s390
platforms. This event bc000 attached raw data is generated only on s390
platform. Correct display on other platforms requires correct endianness
handling.
Committer notes:
Added a init function that sets up a evlist function pointer to avoid
repeated tests on evlist->env and calls to perf_env__name() that
involves normalizing, etc, for each PERF_RECORD_SAMPLE.
Removed needless __maybe_unused from the trace_event_raw()
prototype in session.h, move it to be an static function in evlist.
The 'offset' variable is a size_t, not an u64, fix it to avoid this on
some arches:
CC /tmp/build/perf/util/s390-sample-raw.o
util/s390-sample-raw.c: In function 's390_cpumcfdg_testctr':
util/s390-sample-raw.c:77:4: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'size_t' [-Werror=format=]
pr_err("Invalid counter set entry at %#" PRIx64 "\n",
^
cc1: all warnings being treated as errors
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: https://lkml.kernel.org/r/9c856ac0-ef23-72b5-901d-a1f815508976@linux.ibm.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: https://lkml.kernel.org/n/tip-s3jhif06et9ug78qhclw41z1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove duplicate headers which are included more than once in the same
file.
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Colin King <colin.king@canonical.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Link: http://lkml.kernel.org/r/20190115135916.GA3629@hp-pavilion-15-notebook-pc-brajeswar
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The reader object is defined by file's fd, data offset and data size.
Now we can simply define a reader object for an arbitrary file data
portion and pass it to reader__process_events().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190110101301.6196-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'data_offset' member to reader object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190110101301.6196-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'data_size' member to the reader object. Keep the 'data_size'
variable instead of replacing it with rd.data_size as it will be used in
the following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190110101301.6196-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a session private reader object to encapsulate the reading of the
event data block. Starting with a 'fd' field.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190110101301.6196-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not needed and removing it makes the code a little simpler for the
upcoming changes.
It's safe to replace file_size with data_size, because the
perf_data__size() value is never smaller than data_offset + data_size.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190110101301.6196-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce function arguments and the code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190110101301.6196-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The override status function needs to be updated to use the proper
request parameter in order to get the security state.
Fixes: 3c13e2ac74 ("...Add test support for Intel nvdimm security DSMs")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While updating perf to work with Python3 and Python2 I noticed that the
stat-cpi script was dumping core.
$ perf stat -e cycles,instructions record -o /tmp/perf.data /bin/false
Performance counter stats for '/bin/false':
802,148 cycles
604,622 instructions 802,148 cycles
604,622 instructions
0.001445842 seconds time elapsed
$ perf script -i /tmp/perf.data -s scripts/python/stat-cpi.py
Segmentation fault (core dumped)
...
...
rblist=rblist@entry=0xb2a200 <rt_stat>,
new_entry=new_entry@entry=0x7ffcb755c310) at util/rblist.c:33
ctx=<optimized out>, type=<optimized out>, create=<optimized out>,
cpu=<optimized out>, evsel=<optimized out>) at util/stat-shadow.c:118
ctx=<optimized out>, type=<optimized out>, st=<optimized out>)
at util/stat-shadow.c:196
count=count@entry=727442, cpu=cpu@entry=0, st=0xb2a200 <rt_stat>)
at util/stat-shadow.c:239
config=config@entry=0xafeb40 <stat_config>,
counter=counter@entry=0x133c6e0) at util/stat.c:372
...
...
The issue is that since 1fcd03946b perf_stat__update_shadow_stats now calls
update_runtime_stat passing rt_stat rather than calling update_stats but
perf_stat__init_shadow_stats has never been called to initialize rt_stat in
the script path processing recorded stat data.
Since I can't see any reason why perf_stat__init_shadow_stats() is presently
initialized like it is in builtin-script.c::perf_sample__fprint_metric()
[4bd1bef8bb] I'm proposing it instead be initialized once in __cmd_script
Committer testing:
After applying the patch:
# perf script -i /tmp/perf.data -s tools/perf/scripts/python/stat-cpi.py
0.001970: cpu -1, thread -1 -> cpi 1.709079 (1075684/629394)
#
No segfault.
Signed-off-by: Tony Jones <tonyj@suse.de>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Fixes: 1fcd03946b ("perf stat: Update per-thread shadow stats")
Link: http://lkml.kernel.org/r/20190120191414.12925-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotation line percentage is compared and inserted into the rbtree,
but the percent field of 'struct annotation_data' is an array, the
comparison result between them is the address difference.
This patch compares the right slot of percent array according to
opts->percent_type and makes things right.
The problem can be reproduced by pressing 'H' in perf top annotation view.
It should highlight the instruction line which has the highest sampling
percentage.
Signed-off-by: He Kuang <hekuang@huawei.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190120160523.4391-1-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes an issue in cpumap.c when used with the TOPOLOGY
header. In some configurations, some NUMA nodes may have no CPU (empty
cpulist). Yet a cpumap map must be created otherwise perf abort with an
error. This patch handles this case by creating a dummy map.
Before:
$ perf record -o - -e cycles noploop 2 | perf script -i -
0x6e8 [0x6c]: failed to process type: 80
After:
$ perf record -o - -e cycles noploop 2 | perf script -i -
noploop for 2 seconds
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1547885559-1657-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The https://github.com/paulmckrcu/litmus repository contains a large
number of C-language litmus tests that include "Result:" comments
predicting the verification result. This commit adds a number of scripts
that run tests on these litmus tests:
checkghlitmus.sh:
Runs all litmus tests in the https://github.com/paulmckrcu/litmus
archive that are C-language and that have "Result:" comment lines
documenting expected results, comparing the actual results to
those expected. Clones the repository if it has not already
been cloned into the "tools/memory-model/litmus" directory.
initlitmushist.sh
Run all litmus tests having no more than the specified number
of processes given a specified timeout, recording the results in
.litmus.out files. Clones the repository if it has not already
been cloned into the "tools/memory-model/litmus" directory.
newlitmushist.sh
For all new or updated litmus tests having no more than the
specified number of processes given a specified timeout, run
and record the results in .litmus.out files.
checklitmushist.sh
Run all litmus tests having .litmus.out files from previous
initlitmushist.sh or newlitmushist.sh runs, comparing the
herd output to that of the original runs.
The above scripts will run litmus tests concurrently, by default with
one job per available CPU. Giving any of these scripts the --help
argument will cause them to print usage information.
This commit also adds a number of helper scripts that are not intended
to be invoked from the command line:
cmplitmushist.sh: Compare the output of two different runs of the same
litmus test.
judgelitmus.sh: Compare the output of a litmus test to its "Result:"
comment line.
parseargs.sh: Parse command-line arguments.
runlitmushist.sh: Run the litmus tests whose pathnames are provided one
per line on standard input.
While in the area, this commit also makes the existing checklitmus.sh
and checkalllitmus.sh scripts use parseargs.sh in order to provide a
bit of uniformity. In addition, per-litmus-test status output is directed
to stdout, while end-of-test summary information is directed to stderr.
Finally, the error flag standardizes on "!!!" to assist those familiar
with rcutorture output.
The defaults for the parseargs.sh arguments may be overridden by using
environment variables: LKMM_DESTDIR for --destdir, LKMM_HERD_OPTIONS
for --herdoptions, LKMM_JOBS for --jobs, LKMM_PROCS for --procs, and
LKMM_TIMEOUT for --timeout.
[ paulmck: History-check summary-line changes per Alan Stern feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20181203230451.28921-2-paulmck@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The kernel documents smp_mb__after_unlock_lock() the following way:
"Place this after a lock-acquisition primitive to guarantee that
an UNLOCK+LOCK pair acts as a full barrier. This guarantee applies
if the UNLOCK and LOCK are executed by the same CPU or if the
UNLOCK and LOCK operate on the same lock variable."
Formalize in LKMM the above guarantee by defining (new) mb-links according
to the law:
([M] ; po ; [UL] ; (co | po) ; [LKW] ;
fencerel(After-unlock-lock) ; [M])
where the component ([UL] ; co ; [LKW]) identifies "UNLOCK+LOCK pairs on
the same lock variable" and the component ([UL] ; po ; [LKW]) identifies
"UNLOCK+LOCK pairs executed by the same CPU".
In particular, the LKMM forbids the following two behaviors (the second
litmus test below is based on:
Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html
c.f., Section "Tree RCU Grace Period Memory Ordering Building Blocks"):
C after-unlock-lock-same-cpu
(*
* Result: Never
*)
{}
P0(spinlock_t *s, spinlock_t *t, int *x, int *y)
{
int r0;
spin_lock(s);
WRITE_ONCE(*x, 1);
spin_unlock(s);
spin_lock(t);
smp_mb__after_unlock_lock();
r0 = READ_ONCE(*y);
spin_unlock(t);
}
P1(int *x, int *y)
{
int r0;
WRITE_ONCE(*y, 1);
smp_mb();
r0 = READ_ONCE(*x);
}
exists (0:r0=0 /\ 1:r0=0)
C after-unlock-lock-same-lock-variable
(*
* Result: Never
*)
{}
P0(spinlock_t *s, int *x, int *y)
{
int r0;
spin_lock(s);
WRITE_ONCE(*x, 1);
r0 = READ_ONCE(*y);
spin_unlock(s);
}
P1(spinlock_t *s, int *y, int *z)
{
int r0;
spin_lock(s);
smp_mb__after_unlock_lock();
WRITE_ONCE(*y, 1);
r0 = READ_ONCE(*z);
spin_unlock(s);
}
P2(int *z, int *x)
{
int r0;
WRITE_ONCE(*z, 1);
smp_mb();
r0 = READ_ONCE(*x);
}
exists (0:r0=0 /\ 1:r0=0 /\ 2:r0=0)
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/20181203230451.28921-1-paulmck@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that perf_flags is not used we remove it.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: robin.murphy@arm.com
Cc: suzuki.poulose@arm.com
Link: https://lkml.kernel.org/r/1547128414-50693-13-git-send-email-andrew.murray@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Fix endless loop in nf_tables, from Phil Sutter.
2) Fix cross namespace ip6_gre tunnel hash list corruption, from
Olivier Matz.
3) Don't be too strict in phy_start_aneg() otherwise we might not allow
restarting auto negotiation. From Heiner Kallweit.
4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue.
5) Memory leak in act_tunnel_key, from Davide Caratti.
6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn.
7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet.
8) Missing udplite rehash callbacks, from Alexey Kodanev.
9) Log dirty pages properly in vhost, from Jason Wang.
10) Use consume_skb() in neigh_probe() as this is a normal free not a
drop, from Yang Wei. Likewise in macvlan_process_broadcast().
11) Missing device_del() in mdiobus_register() error paths, from Thomas
Petazzoni.
12) Fix checksum handling of short packets in mlx5, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits)
bpf: in __bpf_redirect_no_mac pull mac only if present
virtio_net: bulk free tx skbs
net: phy: phy driver features are mandatory
isdn: avm: Fix string plus integer warning from Clang
net/mlx5e: Fix cb_ident duplicate in indirect block register
net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
net/mlx5e: Fix wrong error code return on FEC query failure
net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames
tools: bpftool: Cleanup license mess
bpf: fix inner map masking to prevent oob under speculation
bpf: pull in pkt_sched.h header for tooling to fix bpftool build
selftests: forwarding: Add a test case for externally learned FDB entries
selftests: mlxsw: Test FDB offload indication
mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
net: bridge: Mark FDB entries that were added by user as such
mlxsw: spectrum_fid: Update dummy FID index
mlxsw: pci: Return error on PCI reset timeout
mlxsw: pci: Increase PCI SW reset timeout
mlxsw: pci: Ring CQ's doorbell before RDQ's
MAINTAINERS: update email addresses of liquidio driver maintainers
...
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where an ikey/okey pair is set. This test is based on hierarchical topology
described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where a key is set. This test is based on hierarchical topology described
in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
based on hierarchical topology described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where an ikey/okey pair is set. This test is based on flat topology
described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where a key is set. This test is based on flat topology described in file
ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
based on flat topology described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a library with helper functions, to be used in testing IP-in-IP and GRE
tunnels, both in flat and in hierarchical topologies.
The topologies used in this library cover the three scenarios of tunnels -
a tunel with no bound device, a tunnel with bound device in the same VRF
and a tunnel with a bound device in a different VRF.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-20
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem.
2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter.
3) Fix map in map masking to prevent out-of-bounds access under
speculative execution, from Daniel.
4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal
pacing, from Yuchung.
5) Fix json writer license in bpftool, from Thomas.
6) Fix AF_XDP to check if an actually queue exists during umem
setup, from Krzysztof.
7) Several fixes to BPF stackmap's build id handling. Another fix
for bpftool build to account for libbfd variations wrt linking
requirements, from Stanislav.
8) Fix BPF samples build with clang by working around missing asm
goto, from Yonghong.
9) Fix libbpf to retry program load on signal interrupt, from Lorenz.
10) Various minor compile warning fixes in BPF code, from Mathieu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Precise and non-ambiguous license information is important. The recent
relicensing of the bpftools introduced a license conflict.
The files have now:
SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause
and
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version
Amazingly about 20 people acked that change and neither they nor the
committer noticed. Oh well.
Digging deeper: The files were imported from the iproute2 repository with
the GPL V2 or later boiler plate text in commit b66e907cfe ("tools:
bpftool: copy JSON writer from iproute2 repository")
Looking at the iproute2 repository at
git://git.kernel.org/pub/scm/network/iproute2/iproute2.git
the following commit is the equivivalent:
commit d9d8c839 ("json_writer: add SPDX Identifier (GPL-2/BSD-2)")
That commit explicitly removes the boiler plate and relicenses the code
uner GPL-2.0-only and BSD-2-Clause. As Steven wrote the original code and
also the relicensing commit, it's assumed that the relicensing was intended
to do exaclty that. Just the kernel side update failed to remove the boiler
plate. Do so now.
Fixes: 907b223651 ("tools: bpftool: dual license all files")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Sean Young <sean@mess.org>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: David Calavera <david.calavera@gmail.com>
Cc: Andrey Ignatov <rdna@fb.com>
Cc: Joe Stringer <joe@wand.net.nz>
Cc: David Ahern <dsahern@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Petar Penkov <ppenkov@stanford.edu>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
CC: okash.khawaja@gmail.com
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dan reported that bpftool does not compile for him:
$ make tools/bpf
DESCEND bpf
Auto-detecting system features:
.. libbfd: [ on ]
.. disassembler-four-args: [ OFF ]
DESCEND bpftool
Auto-detecting system features:
.. libbfd: [ on ]
.. disassembler-four-args: [ OFF ]
CC /opt/linux.git/tools/bpf/bpftool/net.o
In file included from /opt/linux.git/tools/include/uapi/linux/pkt_cls.h:6:0,
from /opt/linux.git/tools/include/uapi/linux/tc_act/tc_bpf.h:14,
from net.c:13:
net.c: In function 'show_dev_tc_bpf':
net.c:164:21: error: 'TC_H_CLSACT' undeclared (first use in this function)
handle = TC_H_MAKE(TC_H_CLSACT, TC_H_MIN_INGRESS);
[...]
Fix it by importing pkt_sched.h header copy into tooling
infrastructure.
Fixes: 49a249c387 ("tools/bpftool: copy a few net uapi headers to tools directory")
Fixes: f6f3bac08f ("tools/bpf: bpftool: add net support")
Reported-by: Dan Gilson <dan_gilson@yahoo.com>
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=202315
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that externally learned FDB entries can roam, but not age out.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that externally learned FDB entries added from user space are
marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI adapters.
And a fix for probable memory corruption in some of the new NPU code, caught by
smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent during the
merge window but I accidentally only merged the first of two patches in the
series. It's been in linux-next so hopefully doesn't conflict with anything in
acme's tree.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter,
Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Madhavan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=hlZ7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
These options are not present in some (all?) clang versions, so when we
build for a distro that has a gcc new enough to have these options and
that the distro python build config settings use them but clang doesn't
support, b00m.
This is the case with fedora rawhide (now gearing towards f30), so check
if clang has the and remove the missing ones from CFLAGS.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5q50q9w458yawgxf9ez54jbp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
mlxsw doesn't implement offloading of all types of FDB entries that the
VXLAN driver supports. Test that such FDB entries are rejected. That
makes sure that the decision made by the existing validation code in
mlxsw propagates up the stack. It also exercises rollback functionality
in VXLAN, and tests that extack is returned.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS test cases recv_partial & recv_peek_large_buf_mult_recs expect to
receive a certain amount of data and then compare it against known
strings using memcmp. To prevent recvmsg() from returning lesser than
expected number of bytes (compared in memcmp), MSG_WAITALL needs to be
passed in recvmsg().
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the face of missing user notification support, the self test needs
to stop executing a test (ASSERT_*) instead of just reporting and
continuing (EXPECT_*). This adjusts the user notification tests to do
that where needed.
Reported-by: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Tested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
While running test_progs in a loop I found out that I'm sometimes hitting
"Didn't find expected build ID from the map" error.
Looking at stack_map_get_build_id_offset() it seems that it is racy (by
design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock
current->mm->mmap_sem).
Let's retry this test a single time.
Fixes: 13790d1cc7 ("bpf: add selftest for stackmap with build_id in NMI context")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Song Liu reported crash in 'perf record':
> #0 0x0000000000500055 in ordered_events(float, long double,...)(...) ()
> #1 0x0000000000500196 in ordered_events.reinit ()
> #2 0x00000000004fe413 in perf_session.process_events ()
> #3 0x0000000000440431 in cmd_record ()
> #4 0x00000000004a439f in run_builtin ()
> #5 0x000000000042b3e5 in main ()"
This can happen when we get out of buffers during event processing.
The subsequent ordered_events__free() call assumes oe->buffer != NULL
and crashes. Add a check to prevent that.
Reported-by: Song Liu <liu.song.a23@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Song Liu <liu.song.a23@gmail.com>
Tested-by: Song Liu <liu.song.a23@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190117113017.12977-1-jolsa@kernel.org
Fixes: d5ceb62b36 ("perf ordered_events: Add 'struct ordered_events_buffer' layer")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is intended to be used with queues and stacks, it pops and prints
the last element via bpf_map_lookup_and_delete_elem.
Example:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map push pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map pop pinned /sys/fs/bpf/q
value: 00 01 02 03
bpftool map pop pinned /sys/fs/bpf/q
Error: empty map
bpftool map create /sys/fs/bpf/s type stack value 4 entries 10 name s
bpftool map enqueue pinned /sys/fs/bpf/s value 0 1 2 3
bpftool map dequeue pinned /sys/fs/bpf/s
value: 00 01 02 03
bpftool map dequeue pinned /sys/fs/bpf/s
Error: empty map
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is intended to be used with queues and stacks and be more
user-friendly than 'update' without the key.
Example:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map push pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/q
value: 00 01 02 03
bpftool map create /sys/fs/bpf/s type stack value 4 entries 10 name s
bpftool map enqueue pinned /sys/fs/bpf/s value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/s
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is intended to be used with queues and stacks and be more
user-friendly than 'lookup' without key/value.
Example:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/q
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When doing dump or lookup, don't print key if key_size == 0 or value if
value_size == 0. The initial usecase is queue and stack, where we have
only values.
This is for regular output only, json still has all the fields.
Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
key: value: 00 01 02 03
After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bpftool expects key for 'lookup' operations. For some map types, key should
not be specified. Support looking up those map types.
Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
Error: did not find key
After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
key: value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bpftool expects both key and value for 'update' operations. For some
map types, key should not be specified. Support updating those map types.
Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
Error: did not find key
After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format
specifier for the ife type changed from 0x%X to %#llX, causing systematic
failures in the following TDC test cases:
7682 - Create valid ife encode action with mark and pass control
ef47 - Create valid ife encode action with mark and pipe control
df43 - Create valid ife encode action with mark and continue control
e4cf - Create valid ife encode action with mark and drop control
ccba - Create valid ife encode action with mark and reclassify control
a1cf - Create valid ife encode action with mark and jump control
cb3d - Create valid ife encode action with mark value at 32-bit maximum
95ed - Create valid ife encode action with prio and pass control
aa17 - Create valid ife encode action with prio and pipe control
74c7 - Create valid ife encode action with prio and continue control
7a97 - Create valid ife encode action with prio and drop control
f66b - Create valid ife encode action with prio and reclassify control
3056 - Create valid ife encode action with prio and jump control
7dd3 - Create valid ife encode action with prio value at 32-bit maximum
05bb - Create valid ife encode action with tcindex and pass control
ce65 - Create valid ife encode action with tcindex and pipe control
09cd - Create valid ife encode action with tcindex and continue control
8eb5 - Create valid ife encode action with tcindex and continue control
451a - Create valid ife encode action with tcindex and drop control
d76c - Create valid ife encode action with tcindex and reclassify control
e731 - Create valid ife encode action with tcindex and jump control
b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum
2a9c - Create valid ife encode action with mac src parameter
cf5c - Create valid ife encode action with mac dst parameter
2353 - Create valid ife encode action with mac src and mac dst parameters
552c - Create valid ife encode action with mark and type parameters
0421 - Create valid ife encode action with prio and type parameters
4017 - Create valid ife encode action with tcindex and type parameters
fac3 - Create valid ife encode action with index at 32-bit maximnum
7c25 - Create valid ife decode action with pass control
dccb - Create valid ife decode action with pipe control
7bb9 - Create valid ife decode action with continue control
d9ad - Create valid ife decode action with drop control
219f - Create valid ife decode action with reclassify control
8f44 - Create valid ife decode action with jump control
b330 - Create ife encode action with cookie
Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal
to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass
both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpffs pretty print test is extended to cover int128 types.
Tested on an x64 machine.
$ test_btf -p
......
BTF pretty print array(#3)......OK
PASS:9 SKIP:0 FAIL:0
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The test_btf pretty print is refactored in order to easily
support multiple map value formats. The next patch will
add __int128 type tests which needs macro guard __SIZEOF_INT128__.
There is no functionality change with this patch.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Several int128 raw type tests are added to test_btf.
Currently these tests are enabled only for x64 and arm64
for which kernel has CONFIG_ARCH_SUPPORTS_INT128 set.
$ test_btf
......
BTF raw test[106] (128-bit int): OK
BTF raw test[107] (struct, 128-bit int member): OK
BTF raw test[108] (struct, 120-bit int member bitfield): OK
BTF raw test[109] (struct, kind_flag, 128-bit int member): OK
BTF raw test[110] (struct, kind_flag, 120-bit int member bitfield): OK
......
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We are already including tools/scripts/Makefile.include which correctly
handles CROSS_COMPILE, no need to define our own vars.
See related commit 7ed1c1901f ("tools: fix cross-compile var clobbering")
for more details.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
seccomp_bpf fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -Wl,-no-as-needed -Wall
-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lpthread seccomp_bpf.c -o
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf
/tmp/ccrlR3MW.o: In function `tsync_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post'
/tmp/ccrlR3MW.o: In function `TSYNC_setup':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1863: undefined reference to `sem_init'
/tmp/ccrlR3MW.o: In function `TSYNC_teardown':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1904: undefined reference to `sem_destroy'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1897: undefined reference to `pthread_kill'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1898: undefined reference to `pthread_cancel'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1899: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_siblings_fail_prctl':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1978: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1990: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1992: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_ancestor':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2016: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2032: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2034: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_sibling_want_nnp':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2046: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2058: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2060: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_no_filter':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2073: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2098: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2100: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_one_divergence':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2125: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2143: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2145: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_not_under_filter':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2169: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2202: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2227: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
After commit 1c25324caf ("net/sched: act_tunnel_key: Don't dump dst port
if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
port, unless it was explicitly configured. This caused systematic failures
in the following TDC test case:
7a88 - Add tunnel_key action with cookie parameter
Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
pass again.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After merge of commit 80ef0f22ce ("net/sched: act_tunnel_key: Allow
key-less tunnels"), act_tunnel_key does not reject anymore requests to
install 'set' rules where the key id is missing. Therefore, drop the
following TDC testcase:
ba4e - Add tunnel_key set action with missing mandatory id parameter
because it's going to become a systematic fail as soon as userspace
iproute2 will start supporting key-less tunnels.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some platforms, in order to link against libbfd, we need to
link against liberty and even possibly libz. Account for that
in the bpftool Makefile. We now have proper feature detection
for each case, so handle each one separately.
See recent commit 14541b1e7e ("perf build: Don't unconditionally link the
libbfd feature test to -liberty and -lz") where I fixed feature
detection.
v2 (addressed Jakub's nits):
* better syntax for 'else ifeq'
* no space between ifeq args
v3:
* use LIBS, not EXTLIBS for -DHAVE_LIBBFD_SUPPORT
Fixes: 29a9c10e41 ("bpftool: make libbfd optional")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This should be == instead of =.
Fixes: b52354aa06 ("selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An expansion field was added to the kernel copy of this structure for
future use. See mm/gup_benchmark.c.
Add the same expansion field here, so that the IOCTL command decodes
correctly. Otherwise, it fails with EINVAL.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Commit c3494801cd ("bpf: check pending signals while
verifying programs") makes it possible for the BPF_PROG_LOAD
to fail with EAGAIN. Retry unconditionally in this case.
Fixes: c3494801cd ("bpf: check pending signals while verifying programs")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_flow_dissector.sh depends on both with_addr.sh and with_tunnels.sh
However, we install only with_addr.sh.
Add with_tunnels.sh to TEST_PROGS_EXTENDED to make sure it gets
installed as well.
Tested with: make TARGETS=bpf install INSTALL_PATH=$PWD/x
Fixes: ef4ab8447a ("selftests: bpf: install script with_addr.sh")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
Gautier.
2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.
3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
Brivio.
4) Use after free in hns driver, from Yonglong Liu.
5) icmp6_send() needs to handle the case of NULL skb, from Eric
Dumazet.
6) Missing rcu read lock in __inet6_bind() when operating on mapped
addresses, from David Ahern.
7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.
8) Fix PHY vs r8169 module loading ordering issues, from Heiner
Kallweit.
9) Fix bridge vlan memory leak, from Ido Schimmel.
10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.
11) Infoleak in ipv6_local_error(), flow label isn't completely
initialized. From Eric Dumazet.
12) Handle mv88e6390 errata, from Andrew Lunn.
13) Making vhost/vsock CID hashing consistent, from Zha Bin.
14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.
15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
bnxt_en: Fix context memory allocation.
bnxt_en: Fix ring checking logic on 57500 chips.
mISDN: hfcsusb: Use struct_size() in kzalloc()
net: clear skb->tstamp in bridge forwarding path
net: bpfilter: disallow to remove bpfilter module while being used
net: bpfilter: restart bpfilter_umh when error occurred
net: bpfilter: use cleanup callback to release umh_info
umh: add exit routine for UMH process
isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
vhost/vsock: fix vhost vsock cid hashing inconsistent
net: stmmac: Prevent RX starvation in stmmac_napi_poll()
net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
net: stmmac: Check if CBS is supported before configuring
net: stmmac: dwxgmac2: Only clear interrupts that are active
net: stmmac: Fix PCI module removal leak
tools/bpf: fix bpftool map dump with bitfields
tools/bpf: test btf bitfield with >=256 struct member offset
bpf: fix bpffs bitfield pretty print
net: ethernet: mediatek: fix warning in phy_start_aneg
tcp: change txhash on SYN-data timeout
...
There was a bug where the per-mm pkey state was not being preserved across
fork() in the child. fork() is performed in the pkey selftests, but all of
the pkey activity is performed in the parent. The child does not perform
any actions sensitive to pkey state.
To make the test more sensitive to these kinds of bugs, add a fork() where
the parent exits, and execution continues in the child.
To achieve this let the key exhaustion test not terminate at the first
allocation failure and fork after 2*NR_PKEYS loops and continue in the
child.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: peterz@infradead.org
Cc: mpe@ellerman.id.au
Cc: will.deacon@arm.com
Cc: luto@kernel.org
Cc: jroedel@suse.de
Cc: stable@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20190102215657.585704B7@viggo.jf.intel.com
Remove sys/ucontext.h which is included more than once.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
There is a spelling mistake eprintf error message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Unfortunately, some RTC don't have a second resolution for alarm so also
test for alarm on a minute boundary.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Return values for select are not checked properly and timeouts may not be
detected.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>