This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713080625.18256-1-tzimmermann@suse.de
Reset must be properly assert before deassert.
This is important if there is an early boot splash screen
before the kernel start up.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1530271355-5608-1-git-send-email-yannick.fertre@st.com
Filter the requested mode pixel clock frequency according
to the pad maximum supported frequency.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1530271342-5532-1-git-send-email-yannick.fertre@st.com
Add mode_valid() function to filter modes according to available
pll clock values and "preferred" modes. It is particularly
useful for hdmi modes that require precise pixel clocks.
Note that "preferred" modes are always accepted:
- this is important for panels because panel clock tolerances are
bigger than hdmi ones and there is no reason to not accept them
(the fps may vary a little but it is not a problem).
- the hdmi preferred mode will be accepted too, but userland will
be able to use others hdmi "valid" modes if necessary.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417114026.8709-1-philippe.cornu@st.com
When a driver related to one of the endpoints is deferred
due to probe dependencies (i2c, spi...) but the other one
is ready, ltdc probe continues and the deferred driver
will never be probed again.
The fix consists in waiting for all deferred endpoints before
continuing the ltdc probe.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417113441.8214-1-philippe.cornu@st.com
Hw older versions support non-alpha color formats derived
from native alpha color formats only on the primary layer.
For instance, RG16 native format without alpha works fine
on 2nd layer but XR24 (derived color format from AR24)
does not work on 2nd layer.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201104243.20726-3-philippe.cornu@st.com
ltdc supports natively some color formats with alpha (like
ARGB8888, ARGB1555, ARGB4444...). Related non-alpha formats are
supported too (ARGB8888->XRGB8888, ARGB4444->XRGB4444...) by
adjusting ltdc blending factors.
Note: Wayland/Weston requests by default the non-alpha XRGB8888
color format.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201104243.20726-2-philippe.cornu@st.com
To optimize data transfers, align pitch on 128 bytes & height
on 4 bytes. This optimization is not applicable on hw without MMU.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130104200.21602-1-philippe.cornu@st.com
There is a difference between the panel/bridge requested pixel clock
value and the real one due to the hw platform clock preciseness (pll,
dividers...). This patch updates the adjusted_mode clock value with
the real hw clock value so then attached encoder & connector can use
it for precise timing computations.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125160101.9102-1-philippe.cornu@st.com
Bridge drivers/helpers shouldn't be clobbering the drvdata, since a
parent driver might need to own this. Instead, let's return our
'dw_mipi_dsi' object and have callers pass that back to us for removal.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128010538.119114-1-briannorris@chromium.org
Add the 8-bit clut mode support at crtc level.
Useful for low memory footprint user interfaces but also for
8-bit old games (including color shifting visual effects).
Tested with fbdev FBIOPUTCMAP & drm DRM_IOCTL_MODE_SETGAMMA
ioctls.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1509016666-18927-1-git-send-email-philippe.cornu@st.com
devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.
Cc: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1513602150-7542-6-git-send-email-festevam@gmail.com
devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.
Cc: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1513602150-7542-5-git-send-email-festevam@gmail.com
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove duplicate ldev assignment.
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-14-noralf@tronnes.org
ltdc can have up to 2 endpoints:
- dpi external gpios: for rgb panels or external bridge ICs.
- dpi internal ios: connected internally to dsi.
Note: Refer to the reference manual to know if the dsi is
present on your device.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1509018489-19641-3-git-send-email-philippe.cornu@st.com
Rename the driver name from "dw_mipi_dsi-stm" to
"stm32-display-dsi" for a better readability
in /sys/bus/platform/drivers entries.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1509012290-16906-1-git-send-email-philippe.cornu@st.com
gcc-7 complains about multiplying within a condition being
suspicious:
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c: In function 'dsi_pll_get_clkout_khz':
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c:117:10: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
The code here is correct, but can be easily rephrased to make
that more obvious. I also swap out the error handling and the normal
code path for clarity.
Fixes: b0f09a3c69d9 ("drm/stm: Add STM32 DSI controller driver")
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906131331.2691300-1-arnd@arndb.de
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-18-git-send-email-noralf@tronnes.org
The redundant fb helper .load_lut is no longer used, and can not
work right without also providing the fb helpers .gamma_set and
.gamma_get thus rendering the code in this driver suspect.
Just remove the dead code.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-14-peda@axentia.se
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-17-git-send-email-noralf@tronnes.org
Use devm_reset_control_get_exclusive to avoid resource leakage (based
on patch "Convert drivers to explicit reset API" from Philipp Zabel).
Also use platform_get_resource, which is more usual and
consistent with platform_get_irq called later.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-6-git-send-email-philippe.cornu@st.com
Rename the platform driver name from "stm" to "stm32-display"
for a better readability in /sys/bus/platform/drivers entries.
Note: We keep "stm" as drm_driver.name because it is better
when using "modetest -M stm ..." (even if recent modetest patch
avoids using -M).
Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-2-git-send-email-philippe.cornu@st.com
The pixel clock gets enabled early during init, since it's required
in order to read registers. This pixel clock must be disabled if
errors during this init phase.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500277223-29553-2-git-send-email-philippe.cornu@st.com
The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com
The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.
While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
This controller provides output signals to interface directly a variety
of LCD and TFT panels. These output signals are: RGB signals
(up to 24bpp), vertical & horizontal synchronisations, data enable and
the pixel clock.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-5-git-send-email-yannick.fertre@st.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
