When trying to upgrade the iopen glock from a shared to an exclusive lock in
gfs2_evict_inode, abort the wait if there is contention on the corresponding
inode glock: in that case, the inode must still be in active use on another
node, and we're not guaranteed to get the iopen glock anytime soon.
To make this work even better, when we notice contention on the iopen glock and
we can't evict the corresponsing inode and release the iopen glock immediately,
poke the inode glock. The other node(s) trying to acquire the lock can then
abort instead of timing out.
Thanks to Heinz Mauelshagen for pointing out a locking bug in a previous
version of this patch.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In delete_work_func, if the iopen glock still has an inode attached,
limit the inode lookup to that specific generation number: in the likely
case that the inode was deleted on the node on which the inode's link
count dropped to zero, we can skip verifying the on-disk block type and
reading in the inode. The same applies if another node that had the
inode open managed to delete the inode before us.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Use a zero no_formal_ino instead of a NULL pointer to indicate that any inode
generation number will qualify: a valid inode never has a zero no_formal_ino.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When there's contention on the iopen glock, it means that the link count
of the corresponding inode has dropped to zero on a remote node which is
now trying to delete the inode. In that case, try to evict the inode so
that the iopen glock will be released, which will allow the remote node
to do its job.
When the inode is still open locally, the inode's reference count won't
drop to zero and so we'll keep holding the inode and its iopen glock.
The remote node will time out its request to grab the iopen glock, and
when the inode is finally closed locally, we'll try to delete it
ourself.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This requires flushing delayed work items in gfs2_make_fs_ro (which is called
before unmounting a filesystem).
When inodes are deleted and then recreated, pending gl_delete work items would
have no effect because the inode generations will have changed, so we can
cancel any pending gl_delete works before reusing iopen glocks.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When deleting an inode, keep track of the generation of the deleted inode in
the inode glock Lock Value Block (LVB). When trying to delete an inode
remotely, check the last-known inode generation against the deleted inode
generation to skip duplicate remote deletes. This avoids taking the resource
group glock in order to verify the block type.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, asserts based on glocks did not print the glock with
the error. This patch introduces a new macro, gfs2_glock_assert_withdraw
which first prints the glock, then takes the assert.
This also changes a few glock asserts to the new macro.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch makes the glock dumps in debugfs print the number of pages
(nrpages) for address space glocks. This will aid in debugging.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This reverts commit df5db5f9ee.
This patch fixes a regression: patch df5db5f9ee allowed function
run_queue() to bypass its call to do_xmote() if revokes were queued for
the glock. That's wrong because its call to do_xmote() is what is
responsible for calling the go_sync() glops functions to sync both
the ail list and any revokes queued for it. By bypassing the call,
gfs2 could get into a stand-off where the glock could not be demoted
until its revokes are written back, but the revokes would not be
written back because do_xmote() was never called.
It "sort of" works, however, because there are other mechanisms like
the log flush daemon (logd) that can sync the ail items and revokes,
if it deems it necessary. The problem is: without file system pressure,
it might never deem it necessary.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if the go_sync operation returned an error during
the do_xmote process (such as unable to sync metadata to the journal)
the code did goto out. That kept the glock locked, so it could not be
given away, which correctly avoids file system corruption. However,
it never set the withdraw bit or requeueing the glock work. So it would
hang forever, unable to ever demote the glock.
This patch changes to goto to a new label, skip_inval, so that errors
from go_sync are treated the same way as errors from go_inval:
The delayed withdraw bit is set and the work is requeued. That way,
the logd should eventually figure out there's a problem and withdraw
properly there.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, if an error was detected from glock function go_sync
by function do_xmote, it would return. But the function had temporarily
unlocked the gl_lockref spin_lock, and it never re-locked it. When the
caller of do_xmote tried to unlock it again, it was already unlocked,
which resulted in a corrupted spin_lock value.
This patch makes sure the gl_lockref spin_lock is re-locked after it is
unlocked.
Thanks to Wu Bo <wubo40@huawei.com> for reporting this problem.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace open-coded versions of list_first_entry and list_last_entry with those
functions.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function do_xmote would try to sync out the glock
dirty data by calling the appropriate glops function XXX_go_sync()
but it did not check for a good return code. If the sync was not
possible due to an io error or whatever, do_xmote would continue on
and call go_inval and release the glock to other cluster nodes.
When those nodes go to replay the journal, they may already be holding
glocks for the journal records that should have been synced, but were
not due to the ignored error.
This patch introduces proper error code checking to the go_sync
family of glops functions.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, run_queue would demote glocks based on whether
there are any more holders. But if the glock has pending revokes that
haven't been written to the media, giving up the glock might end in
file system corruption if the revokes never get written due to
io errors, node crashes and fences, etc. In that case, another node
will replay the metadata blocks associated with the glock, but
because the revoke was never written, it could replay that block
even though the glock had since been granted to another node who
might have made changes.
This patch changes the logic in run_queue so that it never demotes
a glock until its count of pending revokes reaches zero.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function do_xmote just assumed all the writes
submitted to the journal were finished and successful, and it
called the go_unlock function to release the dlm lock. But if
they're not, and a revoke failed to make its way to the journal,
a journal replay on another node will cause corruption if we
let the go_inval function continue and tell dlm to release the
glock to another node. This patch adds a couple checks for errors
in do_xmote after the calls to go_sync and go_inval. If an error
is found, we cannot withdraw yet, because the withdraw itself
uses glocks to make the file system read-only. Instead, we flag
the error. Later, asserts should cause another node to replay
the journal before continuing, thus protecting rgrp and dinode
glocks and maintaining the integrity of the metadata. Note that
we only need to do this for journaled glocks. System glocks
should be able to progress even under withdrawn conditions.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the rgrp_go_inval and inode_go_inval functions each
checked if there were any items left on the ail count (by way of a
count), and if so, did a withdraw. But the withdraw code now uses
glocks when changing the file system to read-only status. So we can
not have glock functions withdrawing or a hang will likely result:
The glocks can't be serviced by the work_func if the work_func is
busy doing its own withdraw.
This patch removes the checks from the go_inval functions and adds
a centralized check in do_xmote to warn about the problem and not
withdraw, but flag the error so it's eventually caught when the logd
daemon eventually runs.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
When a node withdraws from a file system, it often leaves its journal
in an incomplete state. This is especially true when the withdraw is
caused by io errors writing to the journal. Before this patch, a
withdraw would try to write a "shutdown" record to the journal, tell
dlm it's done with the file system, and none of the other nodes
know about the problem. Later, when the problem is fixed and the
withdrawn node is rebooted, it would then discover that its own
journal was incomplete, and replay it. However, replaying it at this
point is almost guaranteed to introduce corruption because the other
nodes are likely to have used affected resource groups that appeared
in the journal since the time of the withdraw. Replaying the journal
later will overwrite any changes made, and not through any fault of
dlm, which was instructed during the withdraw to release those
resources.
This patch makes file system withdraws seen by the entire cluster.
Withdrawing nodes dequeue their journal glock to allow recovery.
The remaining nodes check all the journals to see if they are
clean or in need of replay. They try to replay dirty journals, but
only the journals of withdrawn nodes will be "not busy" and
therefore available for replay.
Until the journal replay is complete, no i/o related glocks may be
given out, to ensure that the replay does not cause the
aforementioned corruption: We cannot allow any journal replay to
overwrite blocks associated with a glock once it is held.
The "live" glock which is now used to signal when a withdraw
occurs. When a withdraw occurs, the node signals its withdraw by
dequeueing the "live" glock and trying to enqueue it in EX mode,
thus forcing the other nodes to all see a demote request, by way
of a "1CB" (one callback) try lock. The "live" glock is not
granted in EX; the callback is only just used to indicate a
withdraw has occurred.
Note that all nodes in the cluster must wait for the recovering
node to finish replaying the withdrawing node's journal before
continuing. To this end, it checks that the journals are clean
multiple times in a retry loop.
Also note that the withdraw function may be called from a wide
variety of situations, and therefore, we need to take extra
precautions to make sure pointers are valid before using them in
many circumstances.
We also need to take care when glocks decide to withdraw, since
the withdraw code now uses glocks.
Also, before this patch, if a process encountered an error and
decided to withdraw, if another process was already withdrawing,
the second withdraw would be silently ignored, which set it free
to unlock its glocks. That's correct behavior if the original
withdrawer encounters further errors down the road. But if
secondary waiters don't wait for the journal replay, unlocking
glocks will allow other nodes to use them, despite the fact that
the journal containing those blocks is being replayed. The
replay needs to finish before our glocks are released to other
nodes. IOW, secondary withdraws need to wait for the first
withdraw to finish.
For example, if an rgrp glock is unlocked by a process that didn't
wait for the first withdraw, a journal replay could introduce file
system corruption by replaying a rgrp block that has already been
granted to a different cluster node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We need to allow some glocks to be enqueued, dequeued, promoted, and demoted
when we're withdrawn. For example, to maintain metadata integrity, we should
disallow the use of inode and rgrp glocks when withdrawn. Other glocks, like
iopen or the transaction glocks may be safely used because none of their
metadata goes through the journal. So in general, we should disallow all
glocks with an address space, and allow all the others. One exception is:
we need to allow our active journal to be demoted so others may recover it.
Allowing glocks after withdraw gives us the ability to take appropriate
action (in a following patch) to have our journal properly replayed by
another node rather than just abandoning the current transactions and
pretending nothing bad happened, leaving the other nodes free to modify
the blocks we had in our journal, which may result in file system
corruption.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, the rgrp code had a serious problem related to
how it managed buffer_heads for resource groups. The problem caused
file system corruption, especially in cases of journal replay.
When an rgrp glock was demoted to transfer ownership to a
different cluster node, do_xmote() first calls rgrp_go_sync and then
rgrp_go_inval, as expected. When it calls rgrp_go_sync, that called
gfs2_rgrp_brelse() that dropped the buffer_head reference count.
In most cases, the reference count went to zero, which is right.
However, there were other places where the buffers are handled
differently.
After rgrp_go_sync, do_xmote called rgrp_go_inval which called
gfs2_rgrp_brelse a second time, then rgrp_go_inval's call to
truncate_inode_pages_range would get rid of the pages in memory,
but only if the reference count drops to 0.
Unfortunately, gfs2_rgrp_brelse was setting bi->bi_bh = NULL.
So when rgrp_go_sync called gfs2_rgrp_brelse, it lost the pointer
to the buffer_heads in cases where the reference count was still 1.
Therefore, when rgrp_go_inval called gfs2_rgrp_brelse a second time,
it failed the check for "if (bi->bi_bh)" and thus failed to call
brelse a second time. Because of that, the reference count on those
buffers sometimes failed to drop from 1 to 0. And that caused
function truncate_inode_pages_range to keep the pages in page cache
rather than freeing them.
The next time the rgrp glock was acquired, the metadata read of
the rgrp buffers re-used the pages in memory, which were now
wrong because they were likely modified by the other node who
acquired the glock in EX (which is why we demoted the glock).
This re-use of the page cache caused corruption because changes
made by the other nodes were never seen, so the bitmaps were
inaccurate.
For some reason, the problem became most apparent when journal
replay forced the replay of rgrps in memory, which caused newer
rgrp data to be overwritten by the older in-core pages.
A big part of the problem was that the rgrp buffer were released
in multiple places: The go_unlock function would release them when
the glock was released rather than when the glock is demoted,
which is clearly wrong because our intent was to cache them until
the glock is demoted from SH or EX.
This patch attempts to clean up the mess and make one consistent
and centralized mechanism for managing the rgrp buffer_heads by
implementing several changes:
1. It eliminates the call to gfs2_rgrp_brelse() from rgrp_go_sync.
We don't want to release the buffers or zero the pointers when
syncing for the reasons stated above. It only makes sense to
release them when the glock is actually invalidated (go_inval).
And when we do, then we set the bh pointers to NULL.
2. The go_unlock function (which was only used for rgrps) is
eliminated, as we've talked about doing many times before.
The go_unlock function was called too early in the glock dq
process, and should not happen until the glock is invalidated.
3. It also eliminates the call to rgrp_brelse in gfs2_clear_rgrpd.
That will now happen automatically when the rgrp glocks are
demoted, and shouldn't happen any sooner or later than that.
Instead, function gfs2_clear_rgrpd has been modified to demote
the rgrp glocks, and therefore, free those pages, before the
remaining glocks are culled by gfs2_gl_hash_clear. This
prevents the gl_object from hanging around when the glocks are
culled.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
The dlm lockspace is set up to have lock value blocks of GDLM_LVB_SIZE bytes,
and dlm is the only lock manager we support, so there is no point in claiming
that the lock value block could have any other size.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch closes a timing window in which two processes compete
and overlap in the execution of do_xmote for the same glock:
Process A Process B
------------------------------------ -----------------------------
1. Grabs gl_lockref and calls do_xmote
2. Grabs gl_lockref but is blocked
3. Sets GLF_INVALIDATE_IN_PROGRESS
4. Unlocks gl_lockref
5. Calls do_xmote
6. Call glops->go_sync
7. test_and_clear_bit GLF_DIRTY
8. Call gfs2_log_flush Call glops->go_sync
9. (slow IO, so it blocks a long time) test_and_clear_bit GLF_DIRTY
It's not dirty (step 7) returns
10. Tests GLF_INVALIDATE_IN_PROGRESS
11. Calls go_inval (rgrp_go_inval)
12. gfs2_rgrp_relse does brelse
13. truncate_inode_pages_range
14. Calls lm_lock UN
In step 14 we've just told dlm to give the glock to another node
when, in fact, process A has not finished the IO and synced all
buffer_heads to disk and make sure their revokes are done.
This patch fixes the problem by changing the GLF_INVALIDATE_IN_PROGRESS
to use test_and_set_bit, and if the bit is already set, process B just
ignores it and trusts that process A will do the do_xmote in the proper
order.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add function gfs2_withdrawn and replace all checks for the SDF_WITHDRAWN
bit to call it. This does not change the logic or function of gfs2, and
it facilitates later improvements to the withdraw sequence.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Because s_vfs_rename_mutex is not cluster-wide, multiple nodes can
reverse the roles of which directories are "old" and which are "new" for
the purposes of rename. This can cause deadlocks where two nodes end up
waiting for each other.
There can be several layers of directory dependencies across many nodes.
This patch fixes the problem by acquiring all gfs2_rename's inode glocks
asychronously and waiting for all glocks to be acquired. That way all
inodes are locked regardless of the order.
The timeout value for multiple asynchronous glocks is calculated to be
the total of the individual wait times for each glock times two.
Since gfs2_exchange is very similar to gfs2_rename, both functions are
patched in the same way.
A new async glock wait queue, sd_async_glock_wait, keeps a list of
waiters for these events. If gfs2's holder_wake function detects an
async holder, it wakes up any waiters for the event. The waiter only
tests whether any of its requests are still pending.
Since the glocks are sent to dlm asychronously, the wait function needs
to check to see which glocks, if any, were granted.
If a glock is granted by dlm (and therefore held), its minimum hold time
is checked and adjusted as necessary, as other glock grants do.
If the event times out, all glocks held thus far must be dequeued to
resolve any existing deadlocks. Then, if there are any outstanding
locking requests, we need to loop around and wait for dlm to respond to
those requests too. After we release all requests, we return -ESTALE to
the caller (vfs rename) which loops around and retries the request.
Node1 Node2
--------- ---------
1. Enqueue A Enqueue B
2. Enqueue B Enqueue A
3. A granted
6. B granted
7. Wait for B
8. Wait for A
9. A times out (since Node 1 holds A)
10. Dequeue B (since it was granted)
11. Wait for all requests from DLM
12. B Granted (since Node2 released it in step 10)
13. Rename
14. Dequeue A
15. DLM Grants A
16. Dequeue A (due to the timeout and since we
no longer have B held for our task).
17. Dequeue B
18. Return -ESTALE to vfs
19. VFS retries the operation, goto step 1.
This release-all-locks / acquire-all-locks may slow rename / exchange
down as both nodes struggle in the same way and do the same thing.
However, this will only happen when there is contention for the same
inodes, which ought to be rare.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch moves the code that updates glock minimum hold
time to a separate function. This will be called by a future
patch.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch fixes three places in which temporary character buffers
could overflow due to the addition of the file system id from patch
3792ce973f. Thanks to Dan Carpenter for pointing it out.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, if a glock error was encountered, the glock with
the problem was dumped. But sometimes you may have lots of file systems
mounted, and that doesn't tell you which file system it was for.
This patch adds a new boolean parameter fsid to the dump_glock family
of functions. For non-error cases, such as dumping the glocks debugfs
file, the fsid is not dumped in order to keep lock dumps and glocktop
as clean as possible. For all error cases, such as GLOCK_BUG_ON, the
file system id is now printed. This will make it easier to debug.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the superblock flag indicating when a file system
is withdrawn was called SDF_SHUTDOWN. This patch simply renames it to
the more obvious SDF_WITHDRAWN.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Use IS_ERR_OR_NULL where appropriate.
(Several more places converted by Andreas.)
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Commit 73118ca8ba introduced a glock reference counting bug in
gfs2_trans_remove_revoke. Given that, replacing gl_revokes with a GLF flag is
no longer useful, so revert that commit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 44 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gl_revokes value determines how many outstanding revokes a glock has
on the superblock revokes list; this is used to avoid unnecessary log
flushes. However, gl_revokes is only ever tested for being zero, and it's
only decremented in revoke_lo_after_commit, which removes all revokes
from the list, so we know that the gl_revoke values of all the glocks on
the list will reach zero. Therefore, we can replace gl_revokes with a
bit flag. This saves an atomic counter in struct gfs2_glock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch has to do with the life cycle of glocks and buffers. When
gfs2 metadata or journaled data is queued to be written, a gfs2_bufdata
object is assigned to track the buffer, and that is queued to various
lists, including the glock's gl_ail_list to indicate it's on the active
items list. Once the page associated with the buffer has been written,
it is removed from the ail list, but its life isn't over until a revoke
has been successfully written.
So after the block is written, its bufdata object is moved from the
glock's gl_ail_list to a file-system-wide list of pending revokes,
sd_log_le_revoke. At that point the glock still needs to track how many
revokes it contributed to that list (in gl_revokes) so that things like
glock go_sync can ensure all the metadata has been not only written, but
also revoked before the glock is granted to a different node. This is
to guarantee journal replay doesn't replay the block once the glock has
been granted to another node.
Ross Lagerwall recently discovered a race in which an inode could be
evicted, and its glock freed after its ail list had been synced, but
while it still had unwritten revokes on the sd_log_le_revoke list. The
evict decremented the glock reference count to zero, which allowed the
glock to be freed. After the revoke was written, function
revoke_lo_after_commit tried to adjust the glock's gl_revokes counter
and clear its GLF_LFLUSH flag, at which time it referenced the freed
glock.
This patch fixes the problem by incrementing the glock reference count
in gfs2_add_revoke when the glock's first bufdata object is moved from
the glock to the global revokes list. Later, when the glock's last such
bufdata object is freed, the reference count is decremented. This
guarantees that whichever process finishes last (the revoke writing or
the evict) will properly free the glock, and neither will reference the
glock after it has been freed.
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Under certain conditions, lru_count may drop below zero resulting in
a large amount of log spam like this:
vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \
negative objects to delete nr=-1
This happens as follows:
1) A glock is moved from lru_list to the dispose list and lru_count is
decremented.
2) The dispose function calls cond_resched() and drops the lru lock.
3) Another thread takes the lru lock and tries to add the same glock to
lru_list, checking if the glock is on an lru list.
4) It is on a list (actually the dispose list) and so it avoids
incrementing lru_count.
5) The glock is moved to lru_list.
5) The original thread doesn't dispose it because it has been re-added
to the lru list but the lru_count has still decreased by one.
Fix by checking if the LRU flag is set on the glock rather than checking
if the glock is on some list and rearrange the code so that the LRU flag
is added/removed precisely when the glock is added/removed from lru_list.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Mark Syms has reported seeing tasks that are stuck waiting in
find_insert_glock. It turns out that struct lm_lockname contains four padding
bytes on 64-bit architectures that function glock_waitqueue doesn't skip when
hashing the glock name. As a result, we can end up waking up the wrong
waitqueue, and the waiting tasks may be stuck forever.
Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for
the key length.
Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
There is no need to save the dentries for the debugfs files, so drop
those variables to save a bit of space and make the code simpler.
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: cluster-devel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch is based on an idea from Steve Whitehouse. The idea is
to dump the number of pages for inodes in the glock dumps.
The additional locking required me to drop const from quite a few
places.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, various errors and messages were reported using
the pr_* functions: pr_err, pr_warn, pr_info, etc., but that does
not tell you which gfs2 mount had the problem, which is often vital
to debugging. This patch changes the calls from pr_* to fs_* in
most of the messages so that the file system id is printed along
with the message.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function rhashtable_walk_peek is problematic because there is no
guarantee that the glock previously returned still exists; when that key
is deleted, rhashtable_walk_peek can end up returning a different key,
which will cause an inconsistent glock dump. Fix this by keeping track
of the current glock in the seq file iterator functions instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Restore an optimization removed in commit 7f19449553 "Fix debugfs glocks
dump": keep the glock hash table iterator active while the glock dump
file is held open. This avoids having to rescan the hash table from the
start for each read, with quadratically rising runtime.
In addition, use rhastable_walk_peek for resuming a glock dump at the
current position: when a glock doesn't fit in the provided buffer
anymore, the next read must revisit the same glock.
Finally, also restart the dump from the first entry when we notice that
the hash table has been resized in gfs2_glock_seq_start.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Most callers of rhashtable_walk_start don't care about a resize event
which is indicated by a return value of -EAGAIN. So calls to
rhashtable_walk_start are wrapped wih code to ignore -EAGAIN. Something
like this is common:
ret = rhashtable_walk_start(rhiter);
if (ret && ret != -EAGAIN)
goto out;
Since zero and -EAGAIN are the only possible return values from the
function this check is pointless. The condition never evaluates to true.
This patch changes rhashtable_walk_start to return void. This simplifies
code for the callers that ignore -EAGAIN. For the few cases where the
caller cares about the resize event, particularly where the table can be
walked in mulitple parts for netlink or seq file dump, the function
rhashtable_walk_start_check has been added that returns -EAGAIN on a
resize event.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch to rhashtables (commit 88ffbf3e03) broke the debugfs glock
dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a
single buffer: the right function for restarting an rhashtable iteration
from the beginning of the hash table is rhashtable_walk_enter;
rhashtable_walk_stop + rhashtable_walk_start will just resume from the
current position.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
rhashtable_params are not supposed to change at runtime. All
Functions rhashtable_* working with const rhashtable_params
provided by <linux/rhashtable.h>. So mark the non-const structs
as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch cleans up various pieces of GFS2 to avoid sparse errors.
This doesn't fix them all, but it fixes several. The first error,
in function glock_hash_walk was a genuine bug where the rhashtable
could be started and not stopped.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The prepare_to_wait_on_glock and finish_wait_on_glock functions introduced in
commit 56a365be "gfs2: gfs2_glock_get: Wait on freeing glocks" are
better removed, resulting in cleaner code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
gfs2_evict_inode is called to free inodes under memory pressure. The
function calls into DLM when an inode's last cluster-wide reference goes
away (remote unlink) and to release the glock and associated DLM lock
before finally destroying the inode. However, if DLM is blocked on
memory to become available, calling into DLM again will deadlock.
Avoid that by decoupling releasing glocks from destroying inodes in that
case: with gfs2_glock_queue_put, glocks will be dequeued asynchronously
in work queue context, when the associated inodes have likely already
been destroyed.
With this change, inodes can end up being unlinked, remote-unlink can be
triggered, and then the inode can be reallocated before all
remote-unlink callbacks are processed. To detect that, revalidate the
link count in gfs2_evict_inode to make sure we're not deleting an
allocated, referenced inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
