Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5504.c:58: warning: Function parameter or member 'pwr_down_mask' not described in 'ad5504_state'
drivers/iio/dac/ad5504.c:58: warning: Function parameter or member 'pwr_down_mode' not described in 'ad5504_state'
drivers/iio/dac/ad5504.c:64: warning: cannot understand function prototype: 'enum ad5504_supported_device_ids '
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the only use of function related kerneldoc in the sourcefile
and no descriptions are provided.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/ad799x.c:192: warning: Function parameter or member 'irq' not described in 'ad799x_trigger_handler'
drivers/iio/adc/ad799x.c:192: warning: Function parameter or member 'p' not described in 'ad799x_trigger_handler'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/light/us5182d.c:457: warning: Function parameter or member 'data' not described in 'us5182d_update_dark_th'
drivers/iio/light/us5182d.c:457: warning: Function parameter or member 'index' not described in 'us5182d_update_dark_th'
drivers/iio/light/us5182d.c:479: warning: Function parameter or member 'data' not described in 'us5182d_apply_scale'
drivers/iio/light/us5182d.c:479: warning: Function parameter or member 'index' not described in 'us5182d_apply_scale'
Cc: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
'*'s are not welcome in kerneldoc parameter names.
Fixes the following W=1 kernel build warning(s):
drivers/iio/temperature/mlx90632.c:175: warning: Function parameter or member 'data' not described in 'mlx90632_perform_measurement'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document any of the demoted functions here
Fixes the following W=1 kernel build warning(s):
drivers/iio/light/si1145.c:192: warning: Function parameter or member 'data' not described in '__si1145_command_reset'
drivers/iio/light/si1145.c:228: warning: Function parameter or member 'data' not described in 'si1145_command'
drivers/iio/light/si1145.c:228: warning: Function parameter or member 'cmd' not described in 'si1145_command'
drivers/iio/light/si1145.c:1186: warning: Function parameter or member 'trig' not described in 'si1145_trigger_set_state'
drivers/iio/light/si1145.c:1186: warning: Function parameter or member 'state' not described in 'si1145_trigger_set_state'
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ltc2632.c:50: warning: Function parameter or member 'powerdown_cache_mask' not described in 'ltc2632_state'
drivers/iio/dac/ltc2632.c:50: warning: Function parameter or member 'vref_mv' not described in 'ltc2632_state'
drivers/iio/dac/ltc2632.c:50: warning: Function parameter or member 'vref_reg' not described in 'ltc2632_state'
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Silvan Murer <silvan.murer@gmail.com>
Cc: Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/twl6030-gpadc.c:110: warning: Function parameter or member 'ideal' not described in 'twl6030_gpadc_platform_data'
drivers/iio/adc/twl6030-gpadc.c:110: warning: Function parameter or member 'channel_to_reg' not described in 'twl6030_gpadc_platform_data'
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Nishant Kamat <nskamat@ti.com>
Cc: Balaji T K <balajitk@ti.com>
Cc: Graeme Gregory <gg@slimlogic.co.uk>
Cc: Girish S Ghongdemath <girishsg@ti.com>
Cc: Ambresh K <ambresh@ti.com>
Cc: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com>
Cc: Mikko Ylinen <mikko.k.ylinen@nokia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We know that it's okay for 'hmc5843_pm_ops' to be unused here.
Fixes the following W=1 kernel build warning(s):
In file included from include/linux/device.h:25,
from include/linux/iio/iio.h:10,
from drivers/iio/magnetometer/hmc5843_core.c:16:
drivers/iio/magnetometer/hmc5843.h:55:26: warning: ‘hmc5843_pm_ops’ defined but not used [-Wunused-const-variable=]
55 | static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops,
| ^~~~~~~~~~~~~~
include/linux/pm.h:354:25: note: in definition of macro ‘SIMPLE_DEV_PM_OPS’
354 | const struct dev_pm_ops name = { | ^~~~
Cc: Josef Gajdusek <atx@atx.name>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/twl4030-madc.c:170: warning: Function parameter or member 'usb3v1' not described in 'twl4030_madc_data'
Also drop a duplicate description of the lock.
Cc: J Keerthy <j-keerthy@ti.com>
Cc: Mikko Ylinen <mikko.k.ylinen@nokia.com>
Cc: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/twl4030-madc.c: In function ‘twl4030_madc_threaded_irq_handler’:
drivers/iio/adc/twl4030-madc.c:475:9: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
475 | int i, len, ret;
| ^~~
Cc: Sebastian Reichel <sre@kernel.org>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: Mikko Ylinen <mikko.k.ylinen@nokia.com>
Cc: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/ti_am335x_adc.c: In function ‘tiadc_buffer_preenable’:
drivers/iio/adc/ti_am335x_adc.c:297:21: warning: variable ‘read’ set but not used [-Wunused-but-set-variable]
297 | int i, fifo1count, read;
| ^~~~
drivers/iio/adc/ti_am335x_adc.c: In function ‘tiadc_buffer_predisable’:
drivers/iio/adc/ti_am335x_adc.c:346:21: warning: variable ‘read’ set but not used [-Wunused-but-set-variable]
346 | int fifo1count, i, read;
| ^~~~
Cc: Rachna Patil <rachna@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/kmx61.c:327: warning: Function parameter or member 'data' not described in 'kmx61_set_mode'
drivers/iio/imu/kmx61.c:327: warning: Function parameter or member 'mode' not described in 'kmx61_set_mode'
drivers/iio/imu/kmx61.c:327: warning: Function parameter or member 'device' not described in 'kmx61_set_mode'
drivers/iio/imu/kmx61.c:327: warning: Function parameter or member 'update' not described in 'kmx61_set_mode'
drivers/iio/imu/kmx61.c:731: warning: Function parameter or member 'data' not described in 'kmx61_set_power_state'
drivers/iio/imu/kmx61.c:731: warning: Function parameter or member 'on' not described in 'kmx61_set_power_state'
drivers/iio/imu/kmx61.c:731: warning: Function parameter or member 'device' not described in 'kmx61_set_power_state'
Cc: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All lines in the header must start with " *".
Fixes the following W=1 kernel build warning(s):
drivers/iio/magnetometer/mmc35240.c:304: warning: bad line: compensation for output value.
Cc: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/light/cm32181.c:107: warning: Function parameter or member 'dev' not described in 'cm32181_acpi_get_cpm'
drivers/iio/light/cm32181.c:107: warning: Function parameter or member 'obj_name' not described in 'cm32181_acpi_get_cpm'
drivers/iio/light/cm32181.c:107: warning: Function parameter or member 'values' not described in 'cm32181_acpi_get_cpm'
drivers/iio/light/cm32181.c:107: warning: Function parameter or member 'count' not described in 'cm32181_acpi_get_cpm'
Cc: Kevin Tsai <ktsai@capellamicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
... and remove seemingly pointless comment.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5791.c:97: warning: Function parameter or member 'ctrl' not described in 'ad5791_state'
drivers/iio/dac/ad5791.c:97: warning: Function parameter or member 'pwr_down_mode' not described in 'ad5791_state'
drivers/iio/dac/ad5791.c:97: warning: Function parameter or member 'pwr_down' not described in 'ad5791_state'
drivers/iio/dac/ad5791.c:97: warning: Function parameter or member 'data' not described in 'ad5791_state'
drivers/iio/dac/ad5791.c:103: warning: cannot understand function prototype: 'enum ad5791_supported_device_ids '
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Attribute descriptions must match the name exactly.
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5764.c:42: warning: Function parameter or member 'channels' not described in 'ad5764_chip_info'
drivers/iio/dac/ad5764.c:67: warning: Function parameter or member 'lock' not described in 'ad5764_state'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5761.c:80: warning: Function parameter or member 'lock' not described in 'ad5761_state'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc headers need to come directly before the function/struct
that they are documenting. Also fix some missing descriptions and
misspellings.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5758.c:111: warning: Function parameter or member 'reg' not described in 'ad5758_range'
drivers/iio/dac/ad5758.c:111: warning: Function parameter or member 'min' not described in 'ad5758_range'
drivers/iio/dac/ad5758.c:111: warning: Function parameter or member 'max' not described in 'ad5758_range'
drivers/iio/dac/ad5758.c:122: warning: Function parameter or member 'gpio_reset' not described in 'ad5758_state'
drivers/iio/dac/ad5758.c:122: warning: Function parameter or member 'd32' not described in 'ad5758_state'
drivers/iio/dac/ad5758.c:137: warning: cannot understand function prototype: 'enum ad5758_output_range '
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5755.c:105: warning: Function parameter or member 'lock' not described in 'ad5755_state'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5449.c:75: warning: Function parameter or member 'lock' not described in 'ad5449'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5446.c:48: warning: Function parameter or member 'dev' not described in 'ad5446_state'
drivers/iio/dac/ad5446.c:48: warning: Function parameter or member 'cached_val' not described in 'ad5446_state'
drivers/iio/dac/ad5446.c:48: warning: Function parameter or member 'pwr_down_mode' not described in 'ad5446_state'
drivers/iio/dac/ad5446.c:48: warning: Function parameter or member 'pwr_down' not described in 'ad5446_state'
drivers/iio/dac/ad5446.c:48: warning: Function parameter or member 'lock' not described in 'ad5446_state'
drivers/iio/dac/ad5446.c:323: warning: cannot understand function prototype: 'enum ad5446_supported_spi_device_ids '
drivers/iio/dac/ad5446.c:545: warning: cannot understand function prototype: 'enum ad5446_supported_i2c_device_ids '
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
File headers are not good candidates for kerneldoc.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dummy/iio_simple_dummy_buffer.c:27: warning: cannot understand function prototype: 'const s16 fakedata[] = '
drivers/iio/dummy/iio_simple_dummy_buffer.c:185: warning: Function parameter or member 'indio_dev' not described in 'iio_simple_dummy_unconfigure_buffer'
drivers/iio/dummy/iio_simple_dummy_buffer.c:185: warning: Excess function parameter 'indo_dev' description in 'iio_simple_dummy_unconfigure_buffer'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the only use of function related kerneldoc in the sourcefile
and no descriptions are provided.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/ad7887.c:119: warning: Function parameter or member 'irq' not described in 'ad7887_trigger_handler'
drivers/iio/adc/ad7887.c:119: warning: Function parameter or member 'p' not described in 'ad7887_trigger_handler'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5064.c:790:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
790 | static const char * const ad5064_vref_name(struct ad5064_state *st,
| ^~~~~
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
File headers are not good candidates for kerneldoc.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dummy/iio_simple_dummy_events.c:21: warning: Incorrect use of kernel-doc format: * iio_simple_dummy_read_event_config() - is event enabled?
drivers/iio/dummy/iio_simple_dummy_events.c:34: warning: Function parameter or member 'indio_dev' not described in 'iio_simple_dummy_read_event_config'
drivers/iio/dummy/iio_simple_dummy_events.c:34: warning: Function parameter or member 'chan' not described in 'iio_simple_dummy_read_event_config'
drivers/iio/dummy/iio_simple_dummy_events.c:34: warning: Function parameter or member 'type' not described in 'iio_simple_dummy_read_event_config'
drivers/iio/dummy/iio_simple_dummy_events.c:34: warning: Function parameter or member 'dir' not described in 'iio_simple_dummy_read_event_config'
drivers/iio/dummy/iio_simple_dummy_events.c:123: warning: Function parameter or member 'val2' not described in 'iio_simple_dummy_read_event_value'
drivers/iio/dummy/iio_simple_dummy_events.c:146: warning: Function parameter or member 'val2' not described in 'iio_simple_dummy_write_event_value'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5421.c:82: warning: Function parameter or member 'lock' not described in 'ad5421_state'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following checkpatch.pl warning(s):
CHECK: Please use a blank line after function/struct/union/enum declarations
#46: FILE: drivers/iio/dummy/iio_simple_dummy.c:690:
}
+/*
total: 0 errors, 0 warnings, 1 checks, 22 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
File header comments are not good candidates for kerneldoc. Neither
are generic comment blocks.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dummy/iio_simple_dummy.c:26: warning: cannot understand function prototype: 'const struct config_item_type iio_dummy_type = '
drivers/iio/dummy/iio_simple_dummy.c:564: warning: Function parameter or member 'name' not described in 'iio_dummy_probe'
drivers/iio/dummy/iio_simple_dummy.c:564: warning: Excess function parameter 'index' description in 'iio_dummy_probe'
drivers/iio/dummy/iio_simple_dummy.c:700: warning: cannot understand function prototype: 'const struct iio_sw_device_ops iio_dummy_device_ops = '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5380.c:64: warning: Function parameter or member 'lock' not described in 'ad5380_state'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/dac/ad5360.c:89: warning: Function parameter or member 'lock' not described in 'ad5360_state'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document either of the demoted functions here
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/ad7923.c:159: warning: Function parameter or member 'indio_dev' not described in 'ad7923_update_scan_mode'
drivers/iio/adc/ad7923.c:159: warning: Function parameter or member 'active_scan_mask' not described in 'ad7923_update_scan_mode'
drivers/iio/adc/ad7923.c:202: warning: Function parameter or member 'irq' not described in 'ad7923_trigger_handler'
drivers/iio/adc/ad7923.c:202: warning: Function parameter or member 'p' not described in 'ad7923_trigger_handler'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Patrick Vasseur <patrick.vasseur@c-s.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/ad7298.c:106: warning: Function parameter or member 'indio_dev' not described in 'ad7298_update_scan_mode'
drivers/iio/adc/ad7298.c:106: warning: Function parameter or member 'active_scan_mask' not described in 'ad7298_update_scan_mode'
drivers/iio/adc/ad7298.c:154: warning: Function parameter or member 'irq' not described in 'ad7298_trigger_handler'
drivers/iio/adc/ad7298.c:154: warning: Function parameter or member 'p' not described in 'ad7298_trigger_handler'
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Probably due to docrot.
Fixes the following W=1 kernel build warning(s):
drivers/iio/common/ms_sensors/ms_sensors_i2c.c:186: warning: Function parameter or member 'client' not described in 'ms_sensors_read_serial'
drivers/iio/common/ms_sensors/ms_sensors_i2c.c:186: warning: Excess function parameter 'cli' description in 'ms_sensors_read_serial'
Cc: William Markezana <william.markezana@meas-spec.com>
Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct 'bma220_acpi_id' becomes defined but unused.
Fixes the following W=1 kernel build warning(s):
drivers/iio/accel/bma220_spi.c:312:36: warning: ‘bma220_acpi_id’ defined but not used [-Wunused-const-variable=]
312 | static const struct acpi_device_id bma220_acpi_id[] = {
| ^~~~~~~~~~~~~~
Cc: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/ad_sigma_delta.c: In function ‘ad_sd_trigger_handler’:
drivers/iio/adc/ad_sigma_delta.c:405:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
405 | int ret;
| ^~~
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge 5.8-rc6 into staging-next
We need the staging fixes in here, and it resolves a merge issue with an
iio driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl8RWQMRHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0Fog3jg//cMoA/XHNIbhpCCR0soQgculw+b8qmvGn
GMSt2g6AZadRWmKAlzIVn34GJ2TmskA0ksawSLPLPNw0AhGvp+/XJ+UGc6JmF+Sf
5SHbL67e0y8GbGt8882B56ApeLKOVt8sMHIcMHG7xanwZFTw6uFv+OYdjxrG+HhX
YQGyxvSEoXn4xRmjfdw5s/raGuJqfeqYP4PH4FMMoKC6UfLj4tDkLd4/n2C0iCl9
FcozwAT08zZXPYxfBMlG8q44hdSS3DDhVsfmvOlH1T1wN/zA/JqMV0h+qytOgtOV
l1UBCpzpVuTRMJPRf4zHEamsvjo7uhUcr2P5xxGs3hFbXpZwvzWIKffkOwDo09QX
3z7pt6UxfGRc1yKLa3jCgSw6YTtAWBSqZgzEzJSBiM3Au2uUz/a0uD9CpZJAwpAz
Mqd7JqSJmQ2jusrPRQxuYyofGDie1iWsdFx+87BxzoajXRha1Wy10a+t1ItQDWiv
ayEWykptiA0XprJ2m2gYrziWptsgKgK3Z4qo9WaV5N6hyiOH00MPJ9U5RIfEHk0t
cL5KAQv28FHDP9ZKAdMwB6Qjjsj1Xgbvej+XCG4BPtgSQg2/kec7DEqWy9+HVOnR
kcoTSC9ON1+sN59G95w76mOjNYtz98DnRIgVlGsh3Tk2pApUJjSywl3cKtoih0WK
9XqtPrrDQfI=
=LyRl
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, cleanups and features for IIO in the 5.9 cycle
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: buffer: fix attach/detach pollfunc order
iio: core: remove iio_priv_to_dev() helper
Replace HTTP links with HTTPS ones: drivers/iio
Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
iio: cros_ec_accel_legacy: Add Read Only frequency entries
MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer
iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions
iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc()
iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h
iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections.
iio:adc:ti-adc161s626: Drop of_match_ptr protection.
iio:adc:ti-adc084s021: drop of_match_ptr protection
iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections
iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h
iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes
iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections
iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections
iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections
iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include
...
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Report to user space that 10Hz is the sampling frequency of
the accelerometers in legacy mode, and it can not be changed.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The buffer alignment fixes continue to trickle through as we get
reviews in. The rest are the standard mixed bag of long term issues
just discovered an things we missed in this cycle.
IIO fixes
* core
- Add missing IIO_MOD_H2 and ETHANOL strings. Somehow got missed
when drivers were added using these in attribute names.
* afe4403, afe4404, ak8974, hdc100x, hts221, ms5611
- Fix a recently identified issue with alignment when using
iio_push_to_buffers_with_timestamp which assumes the timestamp
is 8 byte aligned.
* ad7780
- Fix a some premature / excess cleanup in an error path.
* adi-axi-adc
- Fix reference counting on the wrong object.
* ak8974
- Fix unbalance runtime pm.
* mma8452
- Fix missing iio_device_unregister in error path.
* zp2326
- Error handling for pm_runtime_get_sync failing.
counter fixes
* Add lock guards in 104-quad-8 to protect against races - done
in 2 patches to allow easy back porting.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl8EvAgRHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0FoheYw/9EGqfk7jh96m13nFbFia4okNpoXpxez4H
a13p/t1v2FAQvfGHEQh1zDXrvS8tMjpYyiumygHKODKESfyo6O1TR07nBL3fJzMR
z35Uwf7DXcizk/k4AKMjT2ivbGFnUTx2tC52wlgsrcdmfbFlgo0Uz6VioREXNk79
34j7e01t3WpzEdA+fOVPji/s8mAILXGTSTHaAbSoTyAuOFNvjnaGSAj4pLILCyPT
cxIRxalmByElhPFHTO8+L1cO38/LhU35LWZC8y4idNL43uhcuOkfPu7gExaZunSt
wYARrEW38WyiOVi2rY3zJlyaw52bLU70+k63Wh0VPYTrGc54y6XRau80kaFm3tgb
Hi5iorTy1KZVVEuPYtKyoer4pYhKfuGuUoXliQQ4YPgG6mhkW3T60R0gNmPT61gq
voNvaOWG0Hsw8vlTwE/c6xcdam+ZoU9oZK1jZHoj8/sIVLENbvEWHoSTG9uUlQNU
/i7c4z0WRgQgAe0DBLXHqzDC72UtDzdNNTpkCE9yLtW2mJr8boRweBLHsxn/kJPV
wRCXuH+GaEFif9ly4SidhxPJwP+nvNJL9QV00+40EMwmM4O19k13J2ON1ygxz5Rg
RS+ZEKpfcsmENhaGgjDc5q8Wy4VWk2mGF6K5Ug1TcED84Tujced5PYLDBmbrh4yB
98adg/jIdOo=
=tm6K
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO and counter fixes in the 5.8 cycle.
The buffer alignment fixes continue to trickle through as we get
reviews in. The rest are the standard mixed bag of long term issues
just discovered an things we missed in this cycle.
IIO fixes
* core
- Add missing IIO_MOD_H2 and ETHANOL strings. Somehow got missed
when drivers were added using these in attribute names.
* afe4403, afe4404, ak8974, hdc100x, hts221, ms5611
- Fix a recently identified issue with alignment when using
iio_push_to_buffers_with_timestamp which assumes the timestamp
is 8 byte aligned.
* ad7780
- Fix a some premature / excess cleanup in an error path.
* adi-axi-adc
- Fix reference counting on the wrong object.
* ak8974
- Fix unbalance runtime pm.
* mma8452
- Fix missing iio_device_unregister in error path.
* zp2326
- Error handling for pm_runtime_get_sync failing.
counter fixes
* Add lock guards in 104-quad-8 to protect against races - done
in 2 patches to allow easy back porting.
* tag 'iio-fixes-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: ad7780: Fix a resource handling path in 'ad7780_probe()'
iio:pressure:ms5611 Fix buffer element alignment
iio:humidity:hts221 Fix alignment and data leak issues
iio:humidity:hdc100x Fix alignment and data leak issues
iio:magnetometer:ak8974: Fix alignment and data leak issues
iio: adc: adi-axi-adc: Fix object reference counting
iio: pressure: zpa2326: handle pm_runtime_get_sync failure
counter: 104-quad-8: Add lock guards - filter clock prescaler
counter: 104-quad-8: Add lock guards - differential encoder
iio: core: add missing IIO_MOD_H2/ETHANOL string identifiers
iio: magnetometer: ak8974: Fix runtime PM imbalance on error
iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()
iio:health:afe4404 Fix timestamp alignment and prevent data leak.
iio:health:afe4403 Fix timestamp alignment and prevent data leak.
This change attaches the life-cycle of the kfifo buffer & IRQ to the
parent-device. This in turn cleans up the exit & error paths, since we
don't need to explicitly cleanup these resources.
The main intent here is to remove the explicit cleanup of the
'indio_dev->buffer' via 'iio_kfifo_free(indio_dev->buffer);'.
As we want to add support for multiple buffers per IIO device, having it
exposed like this makes it tricky to consider a safe backwards compatible
approach for it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change attaches the life-cycle of the channels array to the parent
device object that is attached to the IIO device.
This way we can remove from the cleanup code, the explicit
tiadc_channels_remove() which simply does a kfree() on the channels array.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Whilst it's unlikely this device will ever be instantiated using
ACPI, there is little advantage not assigning the of_device_id table in all
cases and it avoids providing an example that might be coppied into new
drivers.
Also include mod_devicetable.h whilst here as of_device_id is defined
in there so including the header is best practice.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
These stop us using ACPI PRP0001 to instantiate the device.
I am slowly clearly out use of these in IIO to avoid this being coppied
into new drivers.
Here I also included mod_devicetable.h as we are using of_match_id
which is defined in there and hence it is best practice to include
it directly.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Dropping this allows use of ACPI PRP0001.
I'm also looking to drop all of_match_ptr use in IIO in order to avoid
it getting cut and paste into new drivers in the future.
Also add a direct include of mod_devicetable.h to reflect the use
of struct of_device_id.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Allows ACPI PRP0001 to be used with this driver.
Also adds mod_devicetable.h header as the driver is directly using
struct of_device_id which is defined in that file.
I'm also trying to clear out of_match_ptr use in IIO to avoid it
being cut and paste into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mårten Lindahl <martenli@axis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
These just prevent the driver being used with ACPI PRP0001.
I am also trying to remove these from IIO in general to avoid
them being coppied into new drivers.
Also include the mod_devicetable.h header as we are using
of_device_id which is defined in there.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Whilst this driver already supports explicit ACPI bindings we
might as well also allow for PRP0001 based binding.
I'm also keen to remove of_match_ptr from IIO drivers to avoid
this (now) anti-pattern getting coppied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Dropping of_match_ptr allows this driver to be used with ACPI.
The header includes are adjusted to include platform_device.h
and mod_devicetable.h instead of OF specific header as nothing
from that header itself is actually used.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
