The patch adds functionality to retrieve the IBC configuration
by means of function sclp_get_ibc().
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL
operations will be interpreted instead of intercepted. A partial execution
interception will occurr at the sending cpu only if the target cpu is in the
wait state ("W" bit in the cpuflags set). Instruction interception will only
happen in error cases (e.g. cpu addr invalid).
As a sending cpu might set the external call interrupt pending flags at the
target cpu at every point in time, we can't handle this kind of interrupt using
our kvm interrupt injection mechanism. The injection will be done automatically
by the SIE when preparing the start of the target cpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Thomas Huth <thuth@linux.vnet.ibm.com>
[Adopt external call injection to check for sigp interpretion]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The external interrupt interception can only occur in rare cases, e.g.
when the PSW of the interrupt handler has a bad value. The old handler
for this interception simply ignored these events (except for increasing
the exit_external_interrupt counter), but for proper operation we either
have to inject the interrupts manually or we should drop to userspace in
case of errors.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch enables the IBS facility when a single VCPU is running.
The facility is dynamically turned on/off as soon as other VCPUs
enter/leave the stopped state.
When this facility is operating, some instructions can be executed
faster for single-cpu guests.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds support to debug the guest using the PER facility on s390.
Single-stepping, hardware breakpoints and hardware watchpoints are supported. In
order to use the PER facility of the guest without it noticing it, the control
registers of the guest have to be patched and access to them has to be
intercepted(stctl, stctg, lctl, lctlg).
All PER program interrupts have to be intercepted and only the relevant PER
interrupts for the guest have to be given back. Special care has to be taken
about repeated exits on the same hardware breakpoint. The intervention of the
host in the guests PER configuration is not fully transparent. PER instruction
nullification can not be used by the guest and too many storage alteration
events may be reported to the guest (if it is activated for special address
ranges only) when the host concurrently debugging it.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce the methods to emulate the stctl and stctg instruction. Added tracing
code.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When a program interrupt was to be delivered until now, no program interrupt
parameters were stored in the low-core of the target vcpu.
This patch enables the delivery of those program interrupt parameters, takes
care of concurrent PER events which can be injected in addition to any program
interrupt and uses the correct instruction length code (depending on the
interception code) for the injection of program interrupts.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Whenever a program interrupt is intercepted, some parameters are stored in the
sie control block. These parameters have to be extracted in order to be
reinjected correctly. This patch also takes care of intercepted PER events which
can occurr in addition to any program interrupt.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
per_perc_atmid is currently a two-byte field that combines two
fields, the PER code and the PER Addressing-and-Translation-Mode
Identification (ATMID)
Let's make them accessible indepently and also rename per_cause to
per_code.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
According to the Principles of Operation, at offset 0xA3
in the lowcore we have the "Architectural-Mode identification",
not an "access identification".
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Check if siif is available before setting.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add a 'struct kvm_s390_pgm_info pgm' member to kvm_vcpu_arch. This
structure will be used if during instruction emulation in the context
of a vcpu exception data needs to be stored somewhere.
Also add a helper function kvm_s390_inject_prog_cond() which can inject
vcpu's last exception if needed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add 'union ctlreg0_bits' to easily allow setting and testing bits of
control register 0 bits.
This patch only adds the bits needed for the new guest access functions.
Other bits and control registers can be added when needed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce a 'struct psw' which makes it easier to decode and test if
certain bits in a psw are set or are not set.
In addition also add a 'psw_bits()' helper define which allows to
directly modify and test a psw_t structure. E.g.
psw_t psw;
psw_bits(psw).t = 1; /* set dat bit */
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add a new data structure and function that allows to inject
all kinds of interrupt as defined in the PoP
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When userspace reset the guest without notifying kvm, the CMMA state
of the pages might be unused, resulting in guest data corruption.
To avoid this, CMMA must be enabled only if userspace understands
the implications.
CMMA must be enabled before vCPU creation. It can't be switched off
once enabled. All subsequently created vCPUs will be enabled for
CMMA according to the CMMA state of the VM.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[remove now unnecessary calls to page_table_reset_pgste]
For live migration kvm needs to test and clear the dirty bit of guest pages.
That for is ptep_test_and_clear_user_dirty, to be sure we are not racing with
other code, we protect the pte. This needs to be done within
the architecture memory management code.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Switch the user dirty bit detection used for migration from the hardware
provided host change-bit in the pgste to a fault based detection method.
This reduced the dependency of the host from the storage key to a point
where it becomes possible to enable the RCP bypass for KVM guests.
The fault based dirty detection will only indicate changes caused
by accesses via the guest address space. The hardware based method
can detect all changes, even those caused by I/O or accesses via the
kernel page table. The KVM/qemu code needs to take this into account.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The first invocation of storage key operations on a given cpu will be intercepted.
On these intercepts we will enable storage keys for the guest and remove the
previously added intercepts.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce a new function s390_enable_skey(), which enables storage key
handling via setting the use_skey flag in the mmu context.
This function is only useful within the context of kvm.
Note that enabling storage keys will cause a one-time hickup when
walking the page table; however, it saves us special effort for cases
like clear reset while making it possible for us to be architecture
conform.
s390_enable_skey() takes the page table lock to prevent reseting
storage keys triggered from multiple vcpus.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
page_table_reset_pgste() already does a complete page table walk to
reset the pgste. Enhance it to initialize the storage keys to
PAGE_DEFAULT_KEY if requested by the caller. This will be used
for lazy storage key handling. Also provide an empty stub for
!CONFIG_PGSTE
Lets adopt the current code (diag 308) to not clear the keys.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For lazy storage key handling, we need a mechanism to track if the
process ever issued a storage key operation.
This patch adds the basic infrastructure for making the storage
key handling optional, but still leaves it enabled for now by default.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Pull s390 patches from Martin Schwidefsky:
"An update to the oops output with additional information about the
crash. The renameat2 system call is enabled. Two patches in regard
to the PTR_ERR_OR_ZERO cleanup. And a bunch of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/sclp_cmd: replace PTR_RET with PTR_ERR_OR_ZERO
s390/sclp: replace PTR_RET with PTR_ERR_OR_ZERO
s390/sclp_vt220: Fix kernel panic due to early terminal input
s390/compat: fix typo
s390/uaccess: fix possible register corruption in strnlen_user_srst()
s390: add 31 bit warning message
s390: wire up sys_renameat2
s390: show_registers() should not map user space addresses to kernel symbols
s390/mm: print control registers and page table walk on crash
s390/smp: fix smp_stop_cpu() for !CONFIG_SMP
s390: fix control register update
Pull audit updates from Eric Paris.
* git://git.infradead.org/users/eparis/audit: (28 commits)
AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
audit: do not cast audit_rule_data pointers pointlesly
AUDIT: Allow login in non-init namespaces
audit: define audit_is_compat in kernel internal header
kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
sched: declare pid_alive as inline
audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
syscall_get_arch: remove useless function arguments
audit: remove stray newline from audit_log_execve_info() audit_panic() call
audit: remove stray newlines from audit_log_lost messages
audit: include subject in login records
audit: remove superfluous new- prefix in AUDIT_LOGIN messages
audit: allow user processes to log from another PID namespace
audit: anchor all pid references in the initial pid namespace
audit: convert PPIDs to the inital PID namespace.
pid: get pid_t ppid of task in init_pid_ns
audit: rename the misleading audit_get_context() to audit_take_context()
audit: Add generic compat syscall support
audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
...
smp_stop_cpu() should stop the current cpu even for !CONFIG_SMP.
Otherwise machine_halt() will return and and the machine generates a
panic instread of simply stopping the current cpu:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 3.14.0-01527-g2b6ef16a6bc5 #10
[...]
Call Trace:
([<0000000000110db0>] show_trace+0xf8/0x158)
[<0000000000110e7a>] show_stack+0x6a/0xe8
[<000000000074dba8>] panic+0xe4/0x268
[<0000000000140570>] do_exit+0xa88/0xb2c
[<000000000016e12c>] SyS_reboot+0x1f0/0x234
[<000000000075da70>] sysc_nr_ok+0x22/0x28
[<000000007d5a09b4>] 0x7d5a09b4
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull second set of s390 patches from Martin Schwidefsky:
"The second part of Heikos uaccess rework, the page table walker for
uaccess is now a thing of the past (yay!)
The code change to fix the theoretical TLB flush problem allows us to
add a TLB flush optimization for zEC12, this machine has new
instructions that allow to do CPU local TLB flushes for single pages
and for all pages of a specific address space.
Plus the usual bug fixing and some more cleanup"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/uaccess: rework uaccess code - fix locking issues
s390/mm,tlb: optimize TLB flushing for zEC12
s390/mm,tlb: safeguard against speculative TLB creation
s390/irq: Use defines for external interruption codes
s390/irq: Add defines for external interruption codes
s390/sclp: add timeout for queued requests
kvm/s390: also set guest pages back to stable on kexec/kdump
lcs: Add missing destroy_timer_on_stack()
s390/tape: Add missing destroy_timer_on_stack()
s390/tape: Use del_timer_sync()
s390/3270: fix crash with multiple reset device requests
s390/bitops,atomic: add missing memory barriers
s390/zcrypt: add length check for aligned data to avoid overflow in msg-type 6
The current uaccess code uses a page table walk in some circumstances,
e.g. in case of the in atomic futex operations or if running on old
hardware which doesn't support the mvcos instruction.
However it turned out that the page table walk code does not correctly
lock page tables when accessing page table entries.
In other words: a different cpu may invalidate a page table entry while
the current cpu inspects the pte. This may lead to random data corruption.
Adding correct locking however isn't trivial for all uaccess operations.
Especially copy_in_user() is problematic since that requires to hold at
least two locks, but must be protected against ABBA deadlock when a
different cpu also performs a copy_in_user() operation.
So the solution is a different approach where we change address spaces:
User space runs in primary address mode, or access register mode within
vdso code, like it currently already does.
The kernel usually also runs in home space mode, however when accessing
user space the kernel switches to primary or secondary address mode if
the mvcos instruction is not available or if a compare-and-swap (futex)
instruction on a user space address is performed.
KVM however is special, since that requires the kernel to run in home
address space while implicitly accessing user space with the sie
instruction.
So we end up with:
User space:
- runs in primary or access register mode
- cr1 contains the user asce
- cr7 contains the user asce
- cr13 contains the kernel asce
Kernel space:
- runs in home space mode
- cr1 contains the user or kernel asce
-> the kernel asce is loaded when a uaccess requires primary or
secondary address mode
- cr7 contains the user or kernel asce, (changed with set_fs())
- cr13 contains the kernel asce
In case of uaccess the kernel changes to:
- primary space mode in case of a uaccess (copy_to_user) and uses
e.g. the mvcp instruction to access user space. However the kernel
will stay in home space mode if the mvcos instruction is available
- secondary space mode in case of futex atomic operations, so that the
instructions come from primary address space and data from secondary
space
In case of kvm the kernel runs in home space mode, but cr1 gets switched
to contain the gmap asce before the sie instruction gets executed. When
the sie instruction is finished cr1 will be switched back to contain the
user asce.
A context switch between two processes will always load the kernel asce
for the next process in cr1. So the first exit to user space is a bit
more expensive (one extra load control register instruction) than before,
however keeps the code rather simple.
In sum this means there is no need to perform any error prone page table
walks anymore when accessing user space.
The patch seems to be rather large, however it mainly removes the
the page table walk code and restores the previously deleted "standard"
uaccess code, with a couple of changes.
The uaccess without mvcos mode can be enforced with the "uaccess_primary"
kernel parameter.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The zEC12 machines introduced the local-clearing control for the IDTE
and IPTE instruction. If the control is set only the TLB of the local
CPU is cleared of entries, either all entries of a single address space
for IDTE, or the entry for a single page-table entry for IPTE.
Without the local-clearing control the TLB flush is broadcasted to all
CPUs in the configuration, which is expensive.
The reset of the bit mask of the CPUs that need flushing after a
non-local IDTE is tricky. As TLB entries for an address space remain
in the TLB even if the address space is detached a new bit field is
required to keep track of attached CPUs vs. CPUs in the need of a
flush. After a non-local flush with IDTE the bit-field of attached CPUs
is copied to the bit-field of CPUs in need of a flush. The ordering
of operations on cpu_attach_mask, attach_count and mm_cpumask(mm) is
such that an underindication in mm_cpumask(mm) is prevented but an
overindication in mm_cpumask(mm) is possible.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The principles of operations states that the CPU is allowed to create
TLB entries for an address space anytime while an ASCE is loaded to
the control register. This is true even if the CPU is running in the
kernel and the user address space is not (actively) accessed.
In theory this can affect two aspects of the TLB flush logic.
For full-mm flushes the ASCE of the dying process is still attached.
The approach to flush first with IDTE and then just free all page
tables can in theory lead to stale TLB entries. Use the batched
free of page tables for the full-mm flushes as well.
For operations that can have a stale ASCE in the control register,
e.g. a delayed update_user_asce in switch_mm, load the kernel ASCE
to prevent invalid TLBs from being created.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use the new defines for external interruption codes to get rid
of "magic" numbers in the s390 source code. And while we're at it,
also rename the (un-)register_external_interrupt function to
something shorter so that this patch does not exceed the 80
columns all over the place.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce defines for external interruption codes so that we
can get rid of some "magic" numbers in the s390 source code.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull kvm updates from Paolo Bonzini:
"PPC and ARM do not have much going on this time. Most of the cool
stuff, instead, is in s390 and (after a few releases) x86.
ARM has some caching fixes and PPC has transactional memory support in
guests. MIPS has some fixes, with more probably coming in 3.16 as
QEMU will soon get support for MIPS KVM.
For x86 there are optimizations for debug registers, which trigger on
some Windows games, and other important fixes for Windows guests. We
now expose to the guest Broadwell instruction set extensions and also
Intel MPX. There's also a fix/workaround for OS X guests, nested
virtualization features (preemption timer), and a couple kvmclock
refinements.
For s390, the main news is asynchronous page faults, together with
improvements to IRQs (floating irqs and adapter irqs) that speed up
virtio devices"
* tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits)
KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8
KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset
KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode
KVM: PPC: Book3S HV: Return ENODEV error rather than EIO
KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code
KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state
KVM: PPC: Book3S HV: Add transactional memory support
KVM: Specify byte order for KVM_EXIT_MMIO
KVM: vmx: fix MPX detection
KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n
KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE
KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write
KVM: s390: clear local interrupts at cpu initial reset
KVM: s390: Fix possible memory leak in SIGP functions
KVM: s390: fix calculation of idle_mask array size
KVM: s390: randomize sca address
KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
KVM: Bump KVM_MAX_IRQ_ROUTES for s390
KVM: s390: irq routing for adapter interrupts.
KVM: s390: adapter interrupt sources
...
Here's the big driver core / sysfs update for 3.15-rc1.
Lots of kernfs updates to make it useful for other subsystems, and a few
other tiny driver core patches.
All have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlM7A0wACgkQMUfUDdst+ynJNACfZlY+KNKIhNFt1OOW8rQfSZzy
1PYAnjYuOoly01JlPrpJD5b4TdxaAq71
=GVUg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and sysfs updates from Greg KH:
"Here's the big driver core / sysfs update for 3.15-rc1.
Lots of kernfs updates to make it useful for other subsystems, and a
few other tiny driver core patches.
All have been in linux-next for a while"
* tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits)
Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
kernfs: cache atomic_write_len in kernfs_open_file
numa: fix NULL pointer access and memory leak in unregister_one_node()
Revert "driver core: synchronize device shutdown"
kernfs: fix off by one error.
kernfs: remove duplicate dir.c at the top dir
x86: align x86 arch with generic CPU modalias handling
cpu: add generic support for CPU feature based module autoloading
sysfs: create bin_attributes under the requested group
driver core: unexport static function create_syslog_header
firmware: use power efficient workqueue for unloading and aborting fw load
firmware: give a protection when map page failed
firmware: google memconsole driver fixes
firmware: fix google/gsmi duplicate efivars_sysfs_init()
drivers/base: delete non-required instances of include <linux/init.h>
kernfs: fix kernfs_node_from_dentry()
ACPI / platform: drop redundant ACPI_HANDLE check
kernfs: fix hash calculation in kernfs_rename_ns()
kernfs: add CONFIG_KERNFS
sysfs, kobject: add sysfs wrapper for kernfs_enable_ns()
...
When reworking the bitops and atomic ops I missed that those instructions
that got atomic behaviour only perform a "specific-operand-serialization"
instead of a full "serialization".
The compare-and-swap instruction used before performs a full serialization
before and after the instruction is executed, which means it has full
memory barrier semantics.
In order to give the new bitops and atomic ops functions also full memory
barrier semantics add a "bcr 14,0" before and after each of those new
instructions which performs full serialization as well.
This restores memory barrier semantics for bitops and atomic ops functions
which return values, like e.g. atomic_add_return(), but not for functions
which do not return a value, like e.g. atomic_add().
This is consistent to other architectures and what common code requires.
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull s390 updates from Martin Schwidefsky:
"There are two memory management related changes, the CMMA support for
KVM to avoid swap-in of freed pages and the split page table lock for
the PMD level. These two come with common code changes in mm/.
A fix for the long standing theoretical TLB flush problem, this one
comes with a common code change in kernel/sched/.
Another set of changes is Heikos uaccess work, included is the initial
set of patches with more to come.
And fixes and cleanups as usual"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (36 commits)
s390/con3270: optionally disable auto update
s390/mm: remove unecessary parameter from pgste_ipte_notify
s390/mm: remove unnecessary parameter from gmap_do_ipte_notify
s390/mm: fixing comment so that parameter name match
s390/smp: limit number of cpus in possible cpu mask
hypfs: Add clarification for "weight_min" attribute
s390: update defconfigs
s390/ptrace: add support for PTRACE_SINGLEBLOCK
s390/perf: make print_debug_cf() static
s390/topology: Remove call to update_cpu_masks()
s390/compat: remove compat exec domain
s390: select CONFIG_TTY for use of tty in unconditional keyboard driver
s390/appldata_os: fix cpu array size calculation
s390/checksum: remove memset() within csum_partial_copy_from_user()
s390/uaccess: remove copy_from_user_real()
s390/sclp_early: Return correct HSA block count also for zero
s390: add some drivers/subsystems to the MAINTAINERS file
s390: improve debug feature usage
s390/airq: add support for irq ranges
s390/mm: enable split page table lock for PMD level
...
Pull s390 compat wrapper rework from Heiko Carstens:
"S390 compat system call wrapper simplification work.
The intention of this work is to get rid of all hand written assembly
compat system call wrappers on s390, which perform proper sign or zero
extension, or pointer conversion of compat system call parameters.
Instead all of this should be done with C code eg by using Al's
COMPAT_SYSCALL_DEFINEx() macro.
Therefore all common code and s390 specific compat system calls have
been converted to the COMPAT_SYSCALL_DEFINEx() macro.
In order to generate correct code all compat system calls may only
have eg compat_ulong_t parameters, but no unsigned long parameters.
Those patches which change parameter types from unsigned long to
compat_ulong_t parameters are separate in this series, but shouldn't
cause any harm.
The only compat system calls which intentionally have 64 bit
parameters (preadv64 and pwritev64) in support of the x86/32 ABI
haven't been changed, but are now only available if an architecture
defines __ARCH_WANT_COMPAT_SYS_PREADV64/PWRITEV64.
System calls which do not have a compat variant but still need proper
zero extension on s390, like eg "long sys_brk(unsigned long brk)" will
get a proper wrapper function with the new s390 specific
COMPAT_SYSCALL_WRAPx() macro:
COMPAT_SYSCALL_WRAP1(brk, unsigned long, brk);
which generates the following code (simplified):
asmlinkage long sys_brk(unsigned long brk);
asmlinkage long compat_sys_brk(long brk)
{
return sys_brk((u32)brk);
}
Given that the C file which contains all the COMPAT_SYSCALL_WRAP lines
includes both linux/syscall.h and linux/compat.h, it will generate
build errors, if the declaration of sys_brk() doesn't match, or if
there exists a non-matching compat_sys_brk() declaration.
In addition this will intentionally result in a link error if
somewhere else a compat_sys_brk() function exists, which probably
should have been used instead. Two more BUILD_BUG_ONs make sure the
size and type of each compat syscall parameter can be handled
correctly with the s390 specific macros.
I converted the compat system calls step by step to verify the
generated code is correct and matches the previous code. In fact it
did not always match, however that was always a bug in the hand
written asm code.
In result we get less code, less bugs, and much more sanity checking"
* 'compat' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits)
s390/compat: add copyright statement
compat: include linux/unistd.h within linux/compat.h
s390/compat: get rid of compat wrapper assembly code
s390/compat: build error for large compat syscall args
mm/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
kexec/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
net/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
ipc/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
fs/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
ipc/compat: convert to COMPAT_SYSCALL_DEFINE
fs/compat: convert to COMPAT_SYSCALL_DEFINE
security/compat: convert to COMPAT_SYSCALL_DEFINE
mm/compat: convert to COMPAT_SYSCALL_DEFINE
net/compat: convert to COMPAT_SYSCALL_DEFINE
kernel/compat: convert to COMPAT_SYSCALL_DEFINE
fs/compat: optional preadv64/pwrite64 compat system calls
ipc/compat_sys_msgrcv: change msgtyp type from long to compat_long_t
s390/compat: partial parameter conversion within syscall wrappers
s390/compat: automatic zero, sign and pointer conversion of syscalls
s390/compat: add sync_file_range and fallocate compat syscalls
...
- memory leak on certain SIGP conditions
- wrong size for idle bitmap (always too big)
- clear local interrupts on initial CPU reset
1 performance improvement
- improve performance with many guests on certain workloads
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=7smd
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-20140325' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next
3 fixes
- memory leak on certain SIGP conditions
- wrong size for idle bitmap (always too big)
- clear local interrupts on initial CPU reset
1 performance improvement
- improve performance with many guests on certain workloads
We need BITS_TO_LONGS, not sizeof(long) to calculate
the correct size.
idle_mask is a bitmask, each bit representing the state
of a cpu. The desired outcome is an array of unsigned long
fields that can fit KVM_MAX_VCPUS bits. We should not use
sizeof(long) which returnes the size in bytes, but BITS_TO_LONGS
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce a new interrupt class for s390 adapter interrupts and enable
irqfds for s390.
This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP,
that needs to be enabled by userspace.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add a new interface to register/deregister sources of adapter interrupts
identified by an unique id via the flic. Adapters may also be maskable
and carry a list of pinned pages.
These adapters will be used by irq routing later.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Limit the number of bits to the maximum number of cpus a machine
can have.
possible_cpu_mask typically will have more bits set than a machine
may physically have. This results in wasted memory during per-cpu
memory allocations, if the possible mask contains more cpus than
physically possible for a given configuration.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The PTRACE_SINGLEBLOCK option is used to get control whenever
the inferior has executed a successful branch. The PER option to
implement block stepping is successful-branching event, bit 32
in the PER-event mask.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Enforce 32 bit types for all compat syscall argument types.
This way we can make sure that all arguments get correct sign
or zero extension. Otherwise incorrect code would be generated.
E.g. for a 'long' type the COMPAT_SYSCALL_DEFINE macro wouldn't
generate code that would cause sign extension of the passed in 32
bit user space parameter.
This can cause quite subtle bugs like e.g. the one that was fixed
with dfd948e32a "fs/compat: fix parameter handling for compat
readv/writev syscalls".
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Some fs compat system calls have unsigned long parameters instead of
compat_ulong_t.
In order to allow the COMPAT_SYSCALL_DEFINE macro generate code that
performs proper zero and sign extension convert all 64 bit parameters
their corresponding 32 bit counterparts.
compat_sys_io_getevents() is a bit different: the non-compat version
has signed parameters for the "min_nr" and "nr" parameters while the
compat version has unsigned parameters.
So change this as well. For all practical purposes this shouldn't make
any difference (doesn't fix a real bug).
Also introduce a generic compat_aio_context_t type which can be used
everywhere.
The access_ok() check within compat_sys_io_getevents() got also removed
since the non-compat sys_io_getevents() should be able to handle
everything anyway.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
