We were making a bunch of wrong assumptions that turned out to blow out
on non-Broadcom STB platforms:
- we would return -ENODEV from brcmstb_soc_device_early_init() if we
could not find the sun_top_ctrl device node, this is not an error
in the context of a multi-platform kernel
- we would still try to register the Broadcom STB SoC device, even if we
are not running on such a platform
While at it, also fix the sun_top_ctrl device_node leaks while we change
the flow of brcmstb_soc_device_init() and
brcmstb_soc_device_early_init().
Fixes: f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall")
Signed-off-by: Thierry Reding <treding@nvidia.com>
[florian: Combine all of Thierry's patch in one go for easier review]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently if this driver is included, we get the following warning
on any platforms irrespective of whether it's brcmstb platform or not.
"
brcmstb: biuctrl: missing BIU control node
brcmstb: biuctrl: MCP: Unable to disable write pairing!
"
This patch allows to exit early without any warning messages on non
brcmstb platforms as it's meaningless for them.
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Gregory Fong <gregory.0xf0@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Fixes: f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[florian: Add fixes tag, make initcall non fatal]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 23a0d84799.
Patch has issues that's being addressed by the Florian and he will
follow up with a new patch to address the original issue.
Signed-off-by: Olof Johansson <olof@lixom.net>
After moving the SoC device initialization to an early initcall in
commit f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall"),
the Broadcom STB SoC device is registered on all platforms if support
for the device is enabled in the kernel configuration.
This causes an additional SoC device to appear on platforms that already
register a native one. In case of Tegra the STB SoC device is registered
as soc0 (with totally meaningless content in the sysfs attributes) and
causes various scripts and programs to fail because they don't know how
to parse that data.
To fix this, duplicate the check from brcmstb_soc_device_early_init()
that already prevents the code from doing anything nonsensical on non-
STB platforms.
Fixes: f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Being called during early_initcall() is early enough that it occurs
before SMP initialization, which is all we care about for the Bus
Interface Unit configuration.
This solves lack of BIU initialization on ARM64 platforms where we do
not have an anchor where to put the BIU initialization (since there are
no machine descriptors).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We may need access to family_id and product_id fairly early on boot for
other parts of the code (e.g: biuctrl.c), so split the initialization
between an early_init() and an arch_initcall() which allows us to do
that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to achieve expected MCP bus throughput on 3 particular chips:
7268, 7271 and 7278, do the appropriate programming of the MCP
interface: increase number of MCP write credits, turn on write-back
throttling when present.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add definitions for B53 systems register: CPU_MCP_FLOW_REG and
CPU_WRITEBACK_CTRL_REG. These register will be saved and restored
accordingly.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In preparation for saving/restoring additional registers required on
some newer platforms (7268, 7271, 7278), migrate the code to use enums
and helper functions to access registers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
On Broadcom Brahma-B53 CPUs, the CPU_CREDIT_REG offset got moved to
0x0b0 instead of 0x184, correct this such that we correcty
enable/disable write-pairing for these chips.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In preparation for fixing and changing values in the CPU_CREDIT_REG
register for B53-based systems, make the offset parameterized.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This branch contains platform-related driver updates for ARM and ARM64,
these are the areas that bring the changes:
New drivers:
- Driver support for Renesas R-Car V3M (R8A77970)
- Power management support for Amlogic GX
- A new driver for the Tegra BPMP thermal sensor
- A new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- The usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa, uniphier
and mediatek families.
- Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi.
Changes specific to some ARM-based SoC
- The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
on ARM as well.
- Several changes for power management on Broadcom SoCs
- Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
- Minor Cleanups for Samsung, TI OMAP SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qDhq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
Add Product ID and Family ID helper functions for brcmstb soc.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.
This requires quite a lot of code in order to deal with the
different HW blocks that need to be quiesced during suspend:
- DDR PHY
- DDR memory controller and arbiter
- control processor
The final steps of the suspend execute in cache and there is is a little
bit of assembly code in order to shut down the DDR PHY PLL and then go
into a wait loop until a wake-up even occurs. Conversely the resume part
involves waiting for the DDR PHY PLL to come back up and resume
executions where we left.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This commit adds support for the Broadcom STB S2/S3/S5 suspend states on
ARM based SoCs.
This requires quite a lot of code in order to deal with the different HW
blocks that need to be quiesced during suspend:
- DDR PHY SHIM
- DDR memory controller and sequencer
- control processor
The final steps of the suspend execute in an on-chip SRAM and there is a
little bit of assembly code in order to shut down the DDR PHY PLL and
then go into a wfi loop until a wake-up even occurs. Conversely the
resume part involves waiting for the DDR PHY PLL to come back up and
resume executions where we left.
For S3, because of our memory hashing (actual hashing code not included
for simplicity, and is bypassed) we need to relocate the writable
variables (stack) into SRAM shortly before suspending in order to leave
the DRAM untouched and create a reliable hash of its contents.
This code has been contributed by Brian Norris initially and has been
incrementally fixed and updated to support new chips by a lot of people.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Gareth Powell <gpowell@broadcom.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
4.13, please pull the following:
- Doug adds support for the latest generation GISB bus arbiter (v7), he starts by
fixing two issues in how registers are written, and how 64-bit addresses are captured
and then he simplifies the error interception by using notifiers, which allows him
to add support for ARM64
- Markus updates the SOC_BRCMSTB Kconfig depends to cover ARM64 and BMIPS_GENERIC
systems where this code is now also used
-----BEGIN PGP SIGNATURE-----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=Skk5
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux into next/drivers
This pull request contains Broadcom ARM/ARM64 SoCs specific driver changes for
4.13, please pull the following:
- Doug adds support for the latest generation GISB bus arbiter (v7), he starts by
fixing two issues in how registers are written, and how 64-bit addresses are captured
and then he simplifies the error interception by using notifiers, which allows him
to add support for ARM64
- Markus updates the SOC_BRCMSTB Kconfig depends to cover ARM64 and BMIPS_GENERIC
systems where this code is now also used
* tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux:
soc: brcmstb: enable drivers for ARM64 and BMIPS
bus: brcmstb_gisb: update to support new revision
bus: brcmstb_gisb: enable driver for ARM64 architecture
bus: brcmstb_gisb: remove low-level ARM hooks
bus: brcmstb_gisb: add notifier handling
bus: brcmstb_gisb: correct support for 64-bit address output
bus: brcmstb_gisb: Use register offsets with writes too
Signed-off-by: Olof Johansson <olof@lixom.net>
We enable the BRCMSTB SoC drivers not only for ARM, but also ARM64 and
BMIPS.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Remove the duplicate brcm,bcm7425-sun-top-ctrl compatible string and
replace it with brcm,bcm7435-sun-top-ctrl which was intended.
Fixes: bd0faf08dc ("soc: bcm: brcmstb: Match additional compatible strings")
Reported-by: Andreas Oberritter <obi@saftware.de>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Match all known sun-top-ctrl compatible strings from our MIPS chips
counterparts. This allows us to properly report the SoC information to
user-space through our SoC driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We get a harmless warning if the RASPBERRYPI_POWER driver is enabled without
CONFIG_OF during compile testing:
warning: RASPBERRYPI_POWER selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)
There is no need to select PM_GENERIC_DOMAINS_OF if OF is set, so we can
replace the 'select' with a dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Eric Anholt <eric@anholt.net>
The brcmstb_biuctrl_init() is defined in the soc specific header
file, but wasn't included in the driver file. Fix the following
warning by including <linux/soc/brcmstb/brcmstb.h> in the driver:
drivers/soc/brcmstb/biuctrl.c:101:13: warning: symbol 'brcmstb_biuctrl_init' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Unify the different Broadcom SoCs directory and have everybody live
under drivers/soc/bcm/*.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The firmware driver can be a loadable module, but the power domain
can only be built-in, so we get a build error in an allmodconfig
kernel:
:(.text+0x17e59c): undefined reference to `rpi_firmware_property'
:(.text+0x17e51c): undefined reference to `rpi_firmware_get'
:(.text+0x17e244): undefined reference to `rpi_firmware_property'
This changes the dependency to only allow the power domain code
to be enabled when the firmware driver is built-in. Other users
of the firmware driver may still be loadable modules and not
everyone needs the power domains, so we don't change the firmware
code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds support for several power domains on Raspberry Pi,
including USB (so it can be enabled even if the bootloader didn't do
it), and graphics.
This patch is the combined work of Eric Anholt (who wrote USB support
inside of the Raspberry Pi firmware driver, and wrote the non-USB
domain support) and Alexander Aring (who separated the original USB
work out from the firmware driver).
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
