In the end, we ended up with quite a lot more than I expected:
- Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
kernel-side support to come later)
- Support for per-thread stack canaries, pending an update to GCC that
is currently undergoing review
- Support for kexec_file_load(), which permits secure boot of a kexec
payload but also happens to improve the performance of kexec
dramatically because we can avoid the sucky purgatory code from
userspace. Kdump will come later (requires updates to libfdt).
- Optimisation of our dynamic CPU feature framework, so that all
detected features are enabled via a single stop_machine() invocation
- KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
they can benefit from global TLB entries when KASLR is not in use
- 52-bit virtual addressing for userspace (kernel remains 48-bit)
- Patch in LSE atomics for per-cpu atomic operations
- Custom preempt.h implementation to avoid unconditional calls to
preempt_schedule() from preempt_enable()
- Support for the new 'SB' Speculation Barrier instruction
- Vectorised implementation of XOR checksumming and CRC32 optimisations
- Workaround for Cortex-A76 erratum #1165522
- Improved compatibility with Clang/LLD
- Support for TX2 system PMUS for profiling the L3 cache and DMC
- Reflect read-only permissions in the linear map by default
- Ensure MMIO reads are ordered with subsequent calls to Xdelay()
- Initial support for memory hotplug
- Tweak the threshold when we invalidate the TLB by-ASID, so that
mremap() performance is improved for ranges spanning multiple PMDs.
- Minor refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJcE4TmAAoJELescNyEwWM0Nr0H/iaU7/wQSzHyNXtZoImyKTul
Blu2ga4/EqUrTU7AVVfmkl/3NBILWlgQVpY6tH6EfXQuvnxqD7CizbHyLdyO+z0S
B5PsFUH2GLMNAi48AUNqGqkgb2knFbg+T+9IimijDBkKg1G/KhQnRg6bXX32mLJv
Une8oshUPBVJMsHN1AcQknzKariuoE3u0SgJ+eOZ9yA2ZwKxP4yy1SkDt3xQrtI0
lojeRjxcyjTP1oGRNZC+BWUtGOT35p7y6cGTnBd/4TlqBGz5wVAJUcdoxnZ6JYVR
O8+ob9zU+4I0+SKt80s7pTLqQiL9rxkKZ5joWK1pr1g9e0s5N5yoETXKFHgJYP8=
=sYdt
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 festive updates from Will Deacon:
"In the end, we ended up with quite a lot more than I expected:
- Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
kernel-side support to come later)
- Support for per-thread stack canaries, pending an update to GCC
that is currently undergoing review
- Support for kexec_file_load(), which permits secure boot of a kexec
payload but also happens to improve the performance of kexec
dramatically because we can avoid the sucky purgatory code from
userspace. Kdump will come later (requires updates to libfdt).
- Optimisation of our dynamic CPU feature framework, so that all
detected features are enabled via a single stop_machine()
invocation
- KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
they can benefit from global TLB entries when KASLR is not in use
- 52-bit virtual addressing for userspace (kernel remains 48-bit)
- Patch in LSE atomics for per-cpu atomic operations
- Custom preempt.h implementation to avoid unconditional calls to
preempt_schedule() from preempt_enable()
- Support for the new 'SB' Speculation Barrier instruction
- Vectorised implementation of XOR checksumming and CRC32
optimisations
- Workaround for Cortex-A76 erratum #1165522
- Improved compatibility with Clang/LLD
- Support for TX2 system PMUS for profiling the L3 cache and DMC
- Reflect read-only permissions in the linear map by default
- Ensure MMIO reads are ordered with subsequent calls to Xdelay()
- Initial support for memory hotplug
- Tweak the threshold when we invalidate the TLB by-ASID, so that
mremap() performance is improved for ranges spanning multiple PMDs.
- Minor refactoring and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits)
arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset()
arm64: sysreg: Use _BITUL() when defining register bits
arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches
arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4
arm64: docs: document pointer authentication
arm64: ptr auth: Move per-thread keys from thread_info to thread_struct
arm64: enable pointer authentication
arm64: add prctl control for resetting ptrauth keys
arm64: perf: strip PAC when unwinding userspace
arm64: expose user PAC bit positions via ptrace
arm64: add basic pointer authentication support
arm64/cpufeature: detect pointer authentication
arm64: Don't trap host pointer auth use to EL2
arm64/kvm: hide ptrauth from guests
arm64/kvm: consistently handle host HCR_EL2 flags
arm64: add pointer authentication register bits
arm64: add comments about EC exception levels
arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned
arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field
arm64: enable per-task stack canaries
...
When debug with kaslr, it is sometimes necessary to have PHYS_OFFSET to
perform linear virtual address to physical address translation.
Sometimes we're debugging with only few information such as a kernel log
and a symbol file, print PHYS_OFFSET in dump_kernel_offset() for that case.
Tested by:
echo c > /proc/sysrq-trigger
[ 11.996161] SMP: stopping secondary CPUs
[ 11.996732] Kernel Offset: 0x2522200000 from 0xffffff8008000000
[ 11.996881] PHYS_OFFSET: 0xffffffeb40000000
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Open-coding the pointer-auth HWCAPs is a mess and can be avoided by
reusing the multi-cap logic from the CPU errata framework.
Move the multi_entry_cap_matches code to cpufeature.h and reuse it for
the pointer auth HWCAPs.
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We can easily avoid defining the two meta-capabilities for the address
and generic keys, so remove them and instead just check both of the
architected and impdef capabilities when determining the level of system
support.
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We don't need to get at the per-thread keys from assembly at all, so
they can live alongside the rest of the per-thread register state in
thread_struct instead of thread_info.
This will also allow straighforward whitelisting of the keys for
hardened usercopy should we expose them via a ptrace request later on.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add an arm64-specific prctl to allow a thread to reinitialize its
pointer authentication keys to random values. This can be useful when
exec() is not used for starting new processes, to ensure that different
processes still have different keys.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When the kernel is unwinding userspace callchains, we can't expect that
the userspace consumer of these callchains has the data necessary to
strip the PAC from the stored LR.
This patch has the kernel strip the PAC from user stackframes when the
in-kernel unwinder is used. This only affects the LR value, and not the
FP.
This only affects the in-kernel unwinder. When userspace performs
unwinding, it is up to userspace to strip PACs as necessary (which can
be determined from DWARF information).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When pointer authentication is in use, data/instruction pointers have a
number of PAC bits inserted into them. The number and position of these
bits depends on the configured TCR_ELx.TxSZ and whether tagging is
enabled. ARMv8.3 allows tagging to differ for instruction and data
pointers.
For userspace debuggers to unwind the stack and/or to follow pointer
chains, they need to be able to remove the PAC bits before attempting to
use a pointer.
This patch adds a new structure with masks describing the location of
the PAC bits in userspace instruction and data pointers (i.e. those
addressable via TTBR0), which userspace can query via PTRACE_GETREGSET.
By clearing these bits from pointers (and replacing them with the value
of bit 55), userspace can acquire the PAC-less versions.
This new regset is exposed when the kernel is built with (user) pointer
authentication support, and the address authentication feature is
enabled. Otherwise, the regset is hidden.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: Fix to use vabits_user instead of VA_BITS and rename macro]
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch adds basic support for pointer authentication, allowing
userspace to make use of APIAKey, APIBKey, APDAKey, APDBKey, and
APGAKey. The kernel maintains key values for each process (shared by all
threads within), which are initialised to random values at exec() time.
The ID_AA64ISAR1_EL1.{APA,API,GPA,GPI} fields are exposed to userspace,
to describe that pointer authentication instructions are available and
that the kernel is managing the keys. Two new hwcaps are added for the
same reason: PACA (for address authentication) and PACG (for generic
authentication).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Tested-by: Adam Wallis <awallis@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: Fix sizeof() usage and unroll address key initialisation]
Signed-off-by: Will Deacon <will.deacon@arm.com>
So that we can dynamically handle the presence of pointer authentication
functionality, wire up probing code in cpufeature.c.
From ARMv8.3 onwards, ID_AA64ISAR1 is no longer entirely RES0, and now
has four fields describing the presence of pointer authentication
functionality:
* APA - address authentication present, using an architected algorithm
* API - address authentication present, using an IMP DEF algorithm
* GPA - generic authentication present, using an architected algorithm
* GPI - generic authentication present, using an IMP DEF algorithm
This patch checks for both address and generic authentication,
separately. It is assumed that if all CPUs support an IMP DEF algorithm,
the same algorithm is used across all CPUs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In KVM we define the configuration of HCR_EL2 for a VHE HOST in
HCR_HOST_VHE_FLAGS, but we don't have a similar definition for the
non-VHE host flags, and open-code HCR_RW. Further, in head.S we
open-code the flags for VHE and non-VHE configurations.
In future, we're going to want to configure more flags for the host, so
lets add a HCR_HOST_NVHE_FLAGS defintion, and consistently use both
HCR_HOST_VHE_FLAGS and HCR_HOST_NVHE_FLAGS in the kvm code and head.S.
We now use mov_q to generate the HCR_EL2 value, as we use when
configuring other registers in head.S.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Will Deacon <will.deacon@arm.com>
While the CSV3 field of the ID_AA64_PFR0 CPU ID register can be checked
to see if a CPU is susceptible to Meltdown and therefore requires kpti
to be enabled, existing CPUs do not implement this field.
We therefore whitelist all unaffected Cortex-A CPUs that do not implement
the CSV3 field.
Signed-off-by: Will Deacon <will.deacon@arm.com>
This enables the use of per-task stack canary values if GCC has
support for emitting the stack canary reference relative to the
value of sp_el0, which holds the task struct pointer in the arm64
kernel.
The $(eval) extends KBUILD_CFLAGS at the moment the make rule is
applied, which means asm-offsets.o (which we rely on for the offset
value) is built without the arguments, and everything built afterwards
has the options set.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 3962446922 ("arm64: preempt: Provide our own implementation of
asm/preempt.h") extended the preempt count field in struct thread_info
to 64 bits, so that it consists of a 32-bit count plus a 32-bit flag
indicating whether or not the current task needs rescheduling.
Whilst the asm-offsets definition of TSK_TI_PREEMPT was updated to point
to this new field, the assembly usage was left untouched meaning that a
32-bit load from TSK_TI_PREEMPT on a big-endian machine actually returns
the reschedule flag instead of the count.
Whilst we could fix this by pointing TSK_TI_PREEMPT at the count field,
we're actually better off reworking the two assembly users so that they
operate on the whole 64-bit value in favour of inspecting the thread
flags separately in order to determine whether a reschedule is needed.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This is needed for compilation in some configurations that don't
include it implicitly:
arch/arm64/kernel/machine_kexec_file.c: In function 'arch_kimage_file_post_load_cleanup':
arch/arm64/kernel/machine_kexec_file.c:37:2: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]
Fixes: 52b2a8af74 ("arm64: kexec_file: load initrd and device-tree")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The __cpu_up() routine ignores the errors reported by the firmware
for a CPU bringup operation and looks for the error status set by the
booting CPU. If the CPU never entered the kernel, we could end up
in assuming stale error status, which otherwise would have been
set/cleared appropriately by the booting CPU.
Reported-by: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Rather than add additional variables to detect specific early feature
mismatches with secondary CPUs, we can instead dedicate the upper bits
of the CPU boot status word to flag specific mismatches.
This allows us to communicate both granule and VA-size mismatches back
to the primary CPU without the need for additional book-keeping.
Tested-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Enabling 52-bit VAs for userspace is pretty confusing, since it requires
you to select "48-bit" virtual addressing in the Kconfig.
Rework the logic so that 52-bit user virtual addressing is advertised in
the "Virtual address space size" choice, along with some help text to
describe its interaction with Pointer Authentication. The EXPERT-only
option to force all user mappings to the 52-bit range is then made
available immediately below the VA size selection.
Signed-off-by: Will Deacon <will.deacon@arm.com>
On arm64 there is optional support for a 52-bit virtual address space.
To exploit this one has to be running with a 64KB page size and be
running on hardware that supports this.
For an arm64 kernel supporting a 48 bit VA with a 64KB page size,
some changes are needed to support a 52-bit userspace:
* TCR_EL1.T0SZ needs to be 12 instead of 16,
* TASK_SIZE needs to reflect the new size.
This patch implements the above when the support for 52-bit VAs is
detected at early boot time.
On arm64 userspace addresses translation is controlled by TTBR0_EL1. As
well as userspace, TTBR0_EL1 controls:
* The identity mapping,
* EFI runtime code.
It is possible to run a kernel with an identity mapping that has a
larger VA size than userspace (and for this case __cpu_set_tcr_t0sz()
would set TCR_EL1.T0SZ as appropriate). However, when the conditions for
52-bit userspace are met; it is possible to keep TCR_EL1.T0SZ fixed at
12. Thus in this patch, the TCR_EL1.T0SZ size changing logic is
disabled.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For cases where there is a mismatch in ARMv8.2-LVA support between CPUs
we have to be careful in allowing secondary CPUs to boot if 52-bit
virtual addresses have already been enabled on the boot CPU.
This patch adds code to the secondary startup path. If the boot CPU has
enabled 52-bit VAs then ID_AA64MMFR2_EL1 is checked to see if the
secondary can also enable 52-bit support. If not, the secondary is
prevented from booting and an error message is displayed indicating why.
Technically this patch could be implemented using the cpufeature code
when considering 52-bit userspace support. However, we employ low level
checks here as the cpufeature code won't be able to run if we have
mismatched 52-bit kernel va support.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Enabling 52-bit VAs on arm64 requires that the PGD table expands from 64
entries (for the 48-bit case) to 1024 entries. This quantity,
PTRS_PER_PGD is used as follows to compute which PGD entry corresponds
to a given virtual address, addr:
pgd_index(addr) -> (addr >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)
Userspace addresses are prefixed by 0's, so for a 48-bit userspace
address, uva, the following is true:
(uva >> PGDIR_SHIFT) & (1024 - 1) == (uva >> PGDIR_SHIFT) & (64 - 1)
In other words, a 48-bit userspace address will have the same pgd_index
when using PTRS_PER_PGD = 64 and 1024.
Kernel addresses are prefixed by 1's so, given a 48-bit kernel address,
kva, we have the following inequality:
(kva >> PGDIR_SHIFT) & (1024 - 1) != (kva >> PGDIR_SHIFT) & (64 - 1)
In other words a 48-bit kernel virtual address will have a different
pgd_index when using PTRS_PER_PGD = 64 and 1024.
If, however, we note that:
kva = 0xFFFF << 48 + lower (where lower[63:48] == 0b)
and, PGDIR_SHIFT = 42 (as we are dealing with 64KB PAGE_SIZE)
We can consider:
(kva >> PGDIR_SHIFT) & (1024 - 1) - (kva >> PGDIR_SHIFT) & (64 - 1)
= (0xFFFF << 6) & 0x3FF - (0xFFFF << 6) & 0x3F // "lower" cancels out
= 0x3C0
In other words, one can switch PTRS_PER_PGD to the 52-bit value globally
provided that they increment ttbr1_el1 by 0x3C0 * 8 = 0x1E00 bytes when
running with 48-bit kernel VAs (TCR_EL1.T1SZ = 16).
For kernel configuration where 52-bit userspace VAs are possible, this
patch offsets ttbr1_el1 and sets PTRS_PER_PGD corresponding to the
52-bit value.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
[will: added comment to TTBR1_BADDR_4852_OFFSET calculation]
Signed-off-by: Will Deacon <will.deacon@arm.com>
In order to easily mitigate ARM erratum 1165522, we need to force
affected CPUs to run in VHE mode if using KVM.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that arm64ksyms.c has been reduced to a stub, let's remove it
entirely. New exports should be associated with their function
definition.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.
As a step towards removing arm64ksyms.c, let's move the ftrace exports
to the assembly files the functions are defined in.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.
As a step towards removing arm64ksyms.c, let's move the string routine
exports to the assembly files the functions are defined in. Routines
which should only be exported for !KASAN builds are exported using the
EXPORT_SYMBOL_NOKASAN() helper.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.
As a step towards removing arm64ksyms.c, let's move the uaccess exports
to the assembly files the functions are defined in. As we have to
include <asm/assembler.h>, the existing includes are fixed to follow the
usual ordering conventions.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.
As a step towards removing arm64ksyms.c, let's move the copy_page and
clear_page exports to the assembly files the functions are defined in.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.
As a step towards removing arm64ksyms.c, let's move the SMCCC exports to
the assembly file the functions are defined in.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.
As a step towards removing arm64ksyms.c, let's move the tishift exports
to the assembly file the functions are defined in.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since we define memstart_addr in a C file, we can have the export
immediately after the definition of the symbol, as we do elsewhere.
As a step towards removing arm64ksyms.c, move the export of
memstart_addr to init.c, where the symbol is defined.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the arm64 bitops are inlines built atop of the regular atomics,
we don't need to export anything.
Remove the redundant exports.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since commit 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the
I-cache for kernel mappings"), a call to flush_icache_range() will use
an IPI to cross-call other online CPUs so that any stale instructions
are flushed from their pipelines. This triggers a WARN during the
hibernation resume path, where flush_icache_range() is called with
interrupts disabled and is therefore prone to deadlock:
| Disabling non-boot CPUs ...
| CPU1: shutdown
| psci: CPU1 killed.
| CPU2: shutdown
| psci: CPU2 killed.
| CPU3: shutdown
| psci: CPU3 killed.
| WARNING: CPU: 0 PID: 1 at ../kernel/smp.c:416 smp_call_function_many+0xd4/0x350
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc4 #1
Since all secondary CPUs have been taken offline prior to invalidating
the I-cache, there's actually no need for an IPI and we can simply call
__flush_icache_range() instead.
Cc: <stable@vger.kernel.org>
Fixes: 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Reported-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that kexec_walk_memblock() can do the crash-kernel placement itself
architectures that don't support kdump via kexe_file_load() need to
explicitly forbid it.
We don't support this on arm64 until the kernel can add the elfcorehdr
and usable-memory-range fields to the DT. Without these the crash-kernel
overwrites the previous kernel's memory during startup.
Add a check to refuse crash image loading.
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The comment about SYS_MEMBARRIER_SYNC_CORE relying on ERET being
context-synchronizing is confusing and misplaced with kpti. Given that
this is already documented under Documentation/ (see arch-support.txt
for membarrier), remove the comment altogether.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Some CPUs can speculate past an ERET instruction and potentially perform
speculative accesses to memory before processing the exception return.
Since the register state is often controlled by a lower privilege level
at the point of an ERET, this could potentially be used as part of a
side-channel attack.
This patch emits an SB sequence after each ERET so that speculation is
held up on exception return.
Signed-off-by: Will Deacon <will.deacon@arm.com>
We currently use a DSB; ISB sequence to inhibit speculation in set_fs().
Whilst this works for current CPUs, future CPUs may implement a new SB
barrier instruction which acts as an architected speculation barrier.
On CPUs that support it, patch in an SB; NOP sequence over the DSB; ISB
sequence and advertise the presence of the new instruction to userspace.
Signed-off-by: Will Deacon <will.deacon@arm.com>
setup_dtb() is a little difficult to read. This is largely because it
duplicates the FDT -> Linux errno conversion for every intermediate
return value, but also because of silly cosmetic things like naming
and formatting.
Given that this is all brand new, refactor the function to get us off on
the right foot.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Adding "kaslr-seed" to dtb enables triggering kaslr, or kernel virtual
address randomization, at secondary kernel boot. We always do this as
it will have no harm on kaslr-incapable kernel.
We don't have any "switch" to turn off this feature directly, but still
can suppress it by passing "nokaslr" as a kernel boot argument.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: Use rng_is_initialized()]
Signed-off-by: Will Deacon <will.deacon@arm.com>
With this patch, kernel verification can be done without IMA security
subsystem enabled. Turn on CONFIG_KEXEC_VERIFY_SIG instead.
On x86, a signature is embedded into a PE file (Microsoft's format) header
of binary. Since arm64's "Image" can also be seen as a PE file as far as
CONFIG_EFI is enabled, we adopt this format for kernel signing.
You can create a signed kernel image with:
$ sbsign --key ${KEY} --cert ${CERT} Image
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
[will: removed useless pr_debug()]
Signed-off-by: Will Deacon <will.deacon@arm.com>
We use a stop_machine call for each available capability to
enable it on all the CPUs available at boot time. Instead
we could batch the cpu_enable callbacks to a single stop_machine()
call to save us some time.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Use the sorted list of capability entries for the detection and
verification.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Make use of the sorted capability list to access the capability
entry in this_cpu_has_cap() to avoid iterating over the two
tables.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We maintain two separate tables of capabilities, errata and features,
which decide the system capabilities. We iterate over each of these
tables for various operations (e.g, detection, verification etc.).
We do not have a way to map a system "capability" to its entry,
(i.e, cap -> struct arm64_cpu_capabilities) which is needed for
this_cpu_has_cap(). So we iterate over the table one by one to
find the entry and then do the operation. Also, this prevents
us from optimizing the way we "enable" the capabilities on the
CPUs, where we now issue a stop_machine() for each available
capability.
One solution is to merge the two tables into a single table,
sorted by the capability. But this is has the following
disadvantages:
- We loose the "classification" of an errata vs. feature
- It is quite easy to make a mistake when adding an entry,
unless we sort the table at runtime.
So we maintain a list of pointers to the capability entry, sorted
by the "cap number" in a separate array, initialized at boot time.
The only restriction is that we can have one "entry" per capability.
While at it, remove the duplicate declaration of arm64_errata table.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
On arm64, purgatory would do almost nothing. So just invoke secondary
kernel directly by jumping into its entry code.
While, in this case, cpu_soft_restart() must be called with dtb address
in the fifth argument, the behavior still stays compatible with kexec_load
case as long as the argument is null.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch provides kexec_file_ops for "Image"-format kernel. In this
implementation, a binary is always loaded with a fixed offset identified
in text_offset field of its header.
Regarding signature verification for trusted boot, this patch doesn't
contains CONFIG_KEXEC_VERIFY_SIG support, which is to be added later
in this series, but file-attribute-based verification is still a viable
option by enabling IMA security subsystem.
You can sign(label) a to-be-kexec'ed kernel image on target file system
with:
$ evmctl ima_sign --key /path/to/private_key.pem Image
On live system, you must have IMA enforced with, at least, the following
security policy:
"appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig"
See more details about IMA here:
https://sourceforge.net/p/linux-ima/wiki/Home/
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
load_other_segments() is expected to allocate and place all the necessary
memory segments other than kernel, including initrd and device-tree
blob (and elf core header for crash).
While most of the code was borrowed from kexec-tools' counterpart,
users may not be allowed to specify dtb explicitly, instead, the dtb
presented by the original boot loader is reused.
arch_kimage_kernel_post_load_cleanup() is responsible for freeing arm64-
specific data allocated in load_other_segments().
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
