This is no longer used anywhere, remove all of it.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We no longer use this list we've passed around so remove it everywhere.
Also remove the extra checks for ordered/filemap errors as this is
handled higher up now that we're waiting on ordered_extents before
getting to the tree log code.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we are waiting on all ordered extents at the start of the fsync()
path we don't need to wait on any logged ordered extents, and we don't
need to look up the checksums on the ordered extents as they will
already be on disk prior to getting here. Rework this so we're only
looking up and copying the on-disk checksums for the extent range we
care about.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a priority inversion that exists currently with btrfs fsync. In
some cases we will collect outstanding ordered extents onto a list and
only wait on them at the very last second. However this "very last
second" falls inside of a transaction handle, so if we are in a lower
priority cgroup we can end up holding the transaction open for longer
than needed, so if a high priority cgroup is also trying to fsync()
it'll see latency.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment wrongfully states that the owner parameter is the level of
the parent block. In fact owner is the level of the current block and
by adding 1 to it we can eventually get to the parent/root.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Here is a doc-only patch which tires to deobfuscate the terra-incognita
that arguments for delayed refs are.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit ac0b4145d6 ("btrfs: scrub: Don't use inode pages
for device replace") the function is not used and we can remove all
functions down the call chain.
There was an optimization that reused inode pages to speed up device
replace, but broke when there was nodatasum and compressed page. The
potential performance gain is small so we don't loose much by removing
it and using scrub_pages same as the other pages.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The get_seconds() function is deprecated as it truncates the timestamp
to 32 bits. Change it to or ktime_get_real_seconds().
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=f7eB
-----END PGP SIGNATURE-----
Merge tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix of a corruption regarding fsync and clone, under some very
specific conditions explained in the patch.
The fix is marked for stable 3.16+ so I'd like to get it merged now
given the impact"
* tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix file data corruption after cloning a range and fsync
When we clone a range into a file we can end up dropping existing
extent maps (or trimming them) and replacing them with new ones if the
range to be cloned overlaps with a range in the destination inode.
When that happens we add the new extent maps to the list of modified
extents in the inode's extent map tree, so that a "fast" fsync (the flag
BTRFS_INODE_NEEDS_FULL_SYNC not set in the inode) will see the extent maps
and log corresponding extent items. However, at the end of range cloning
operation we do truncate all the pages in the affected range (in order to
ensure future reads will not get stale data). Sometimes this truncation
will release the corresponding extent maps besides the pages from the page
cache. If this happens, then a "fast" fsync operation will miss logging
some extent items, because it relies exclusively on the extent maps being
present in the inode's extent tree, leading to data loss/corruption if
the fsync ends up using the same transaction used by the clone operation
(that transaction was not committed in the meanwhile). An extent map is
released through the callback btrfs_invalidatepage(), which gets called by
truncate_inode_pages_range(), and it calls __btrfs_releasepage(). The
later ends up calling try_release_extent_mapping() which will release the
extent map if some conditions are met, like the file size being greater
than 16Mb, gfp flags allow blocking and the range not being locked (which
is the case during the clone operation) nor being the extent map flagged
as pinned (also the case for cloning).
The following example, turned into a test for fstests, reproduces the
issue:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0x18 9000K 6908K" /mnt/foo
$ xfs_io -f -c "pwrite -S 0x20 2572K 156K" /mnt/bar
$ xfs_io -c "fsync" /mnt/bar
# reflink destination offset corresponds to the size of file bar,
# 2728Kb minus 4Kb.
$ xfs_io -c ""reflink ${SCRATCH_MNT}/foo 0 2724K 15908K" /mnt/bar
$ xfs_io -c "fsync" /mnt/bar
$ md5sum /mnt/bar
95a95813a8c2abc9aa75a6c2914a077e /mnt/bar
<power fail>
$ mount /dev/sdb /mnt
$ md5sum /mnt/bar
207fd8d0b161be8a84b945f0df8d5f8d /mnt/bar
# digest should be 95a95813a8c2abc9aa75a6c2914a077e like before the
# power failure
In the above example, the destination offset of the clone operation
corresponds to the size of the "bar" file minus 4Kb. So during the clone
operation, the extent map covering the range from 2572Kb to 2728Kb gets
trimmed so that it ends at offset 2724Kb, and a new extent map covering
the range from 2724Kb to 11724Kb is created. So at the end of the clone
operation when we ask to truncate the pages in the range from 2724Kb to
2724Kb + 15908Kb, the page invalidation callback ends up removing the new
extent map (through try_release_extent_mapping()) when the page at offset
2724Kb is passed to that callback.
Fix this by setting the bit BTRFS_INODE_NEEDS_FULL_SYNC whenever an extent
map is removed at try_release_extent_mapping(), forcing the next fsync to
search for modified extents in the fs/subvolume tree instead of relying on
the presence of extent maps in memory. This way we can continue doing a
"fast" fsync if the destination range of a clone operation does not
overlap with an existing range or if any of the criteria necessary to
remove an extent map at try_release_extent_mapping() is not met (file
size not bigger then 16Mb or gfp flags do not allow blocking).
CC: stable@vger.kernel.org # 3.16+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In commit ac0b4145d6 ("btrfs: scrub: Don't use inode pages for device
replace") we removed the branch of copy_nocow_pages() to avoid
corruption for compressed nodatasum extents.
However above commit only solves the problem in scrub_extent(), if
during scrub_pages() we failed to read some pages,
sctx->no_io_error_seen will be non-zero and we go to fixup function
scrub_handle_errored_block().
In scrub_handle_errored_block(), for sctx without csum (no matter if
we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine,
which does the similar thing with copy_nocow_pages(), but does it
without the extra check in copy_nocow_pages() routine.
So for test cases like btrfs/100, where we emulate read errors during
replace/scrub, we could corrupt compressed extent data again.
This patch will fix it just by avoiding any "optimization" for
nodatasum, just falls back to the normal fixup routine by try read from
any good copy.
This also solves WARN_ON() or dead lock caused by lame backref iteration
in scrub_fixup_nodatasum() routine.
The deadlock or WARN_ON() won't be triggered before commit ac0b4145d6
("btrfs: scrub: Don't use inode pages for device replace") since
copy_nocow_pages() have better locking and extra check for data extent,
and it's already doing the fixup work by try to read data from any good
copy, so it won't go scrub_fixup_nodatasum() anyway.
This patch disables the faulty code and will be removed completely in a
followup patch.
Fixes: ac0b4145d6 ("btrfs: scrub: Don't use inode pages for device replace")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_cmp_data_free() puts cmp's src_pages and dst_pages, but leaves
their page address intact. Now, if you hit "goto again" in
btrfs_extent_same_range() and hit some error in
btrfs_cmp_data_prepare(), you'll try to unlock/put already put pages.
This is simple fix to reset the address to avoid use-after-free.
Fixes: 67b07bd4be ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl")
Signed-off-by: Naohiro Aota <naota@elisp.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 542c5908ab ("btrfs: replace uuid_mutex by
device_list_mutex in btrfs_open_devices") switched to device_list_mutex
as we need that for the device list traversal, but we also need
uuid_mutex to protect access to fs_devices::opened to be consistent with
other users of that.
Fixes: 542c5908ab ("btrfs: replace uuid_mutex by device_list_mutex in btrfs_open_devices")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=KWL7
-----END PGP SIGNATURE-----
Merge tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few regression fixes for qgroup rescan status tracking and
the vm_fault_t conversion that mixed up the error values"
* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix mount failure when qgroup rescan is in progress
Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf
If a power failure happens while the qgroup rescan kthread is running,
the next mount operation will always fail. This is because of a recent
regression that makes qgroup_rescan_init() incorrectly return -EINVAL
when we are mounting the filesystem (through btrfs_read_qgroup_config()).
This causes the -EINVAL error to be returned regardless of any qgroup
flags being set instead of returning the error only when neither of
the flags BTRFS_QGROUP_STATUS_FLAG_RESCAN nor BTRFS_QGROUP_STATUS_FLAG_ON
are set.
A test case for fstests follows up soon.
Fixes: 9593bf4967 ("btrfs: qgroup: show more meaningful qgroup_rescan_init error message")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The vm_fault_t conversion commit introduced a ret2 variable for tracking
the integer return values from internal btrfs functions. It was
sometimes returning VM_FAULT_LOCKED for pages that were actually invalid
and had been removed from the radix. Something like this:
ret2 = btrfs_delalloc_reserve_space() // returns zero on success
lock_page(page)
if (page->mapping != inode->i_mapping)
goto out_unlock;
...
out_unlock:
if (!ret2) {
...
return VM_FAULT_LOCKED;
}
This ends up triggering this WARNING in btrfs_destroy_inode()
WARN_ON(BTRFS_I(inode)->block_rsv.size);
xfstests generic/095 was able to reliably reproduce the errors.
Since out_unlock: is only used for errors, this fix moves it below the
if (!ret2) check we use to return VM_FAULT_LOCKED for success.
Fixes: a528a24150 (btrfs: change return type of btrfs_page_mkwrite to vm_fault_t)
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit ff3d27a048 ("btrfs: qgroup: Finish rescan when hit the last leaf
of extent tree") added a new exit for rescan finish.
However after finishing quota rescan, we set
fs_info->qgroup_rescan_progress to (u64)-1 before we exit through the
original exit path.
While we missed that assignment of (u64)-1 in the new exit path.
The end result is, the quota status item doesn't have the same value.
(-1 vs the last bytenr + 1)
Although it doesn't affect quota accounting, it's still better to keep
the original behavior.
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Fixes: ff3d27a048 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=fCdm
-----END PGP SIGNATURE-----
Merge tag 'for-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two regression fixes and an incorrect error value propagation fix from
'rename exchange'"
* tag 'for-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix return value on rename exchange failure
btrfs: fix invalid-free in btrfs_extent_same
Btrfs: fix physical offset reported by fiemap for inline extents
If we failed during a rename exchange operation after starting/joining a
transaction, we would end up replacing the return value, stored in the
local 'ret' variable, with the return value from btrfs_end_transaction().
So this could end up returning 0 (success) to user space despite the
operation having failed and aborted the transaction, because if there are
multiple tasks having a reference on the transaction at the time
btrfs_end_transaction() is called by the rename exchange, that function
returns 0 (otherwise it returns -EIO and not the original error value).
So fix this by not overwriting the return value on error after getting
a transaction handle.
Fixes: cdd1fedf82 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If this condition ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) !=
(BTRFS_I(dst)->flags & BTRFS_INODE_NODATASUM))
is hit, we will go to free the uninitialized cmp.src_pages and
cmp.dst_pages.
Fixes: 67b07bd4be ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl")
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9d311e11fc ("Btrfs: fiemap: pass correct bytenr when
fm_extent_count is zero") introduced a regression where we no longer
report 0 as the physical offset for inline extents (and other extents
with a special block_start value). This is because it always sets the
variable used to report the physical offset ("disko") as em->block_start
plus some offset, and em->block_start has the value 18446744073709551614
((u64) -2) for inline extents.
This made the btrfs test 004 (from fstests) often fail, for example, for
a file with an inline extent we have the following items in the subvolume
tree:
item 101 key (418 INODE_ITEM 0) itemoff 11029 itemsize 160
generation 25 transid 38 size 1525 nbytes 1525
block group 0 mode 100666 links 1 uid 0 gid 0 rdev 0
sequence 0 flags 0x2(none)
atime 1529342058.461891730 (2018-06-18 18:14:18)
ctime 1529342058.461891730 (2018-06-18 18:14:18)
mtime 1529342058.461891730 (2018-06-18 18:14:18)
otime 1529342055.869892885 (2018-06-18 18:14:15)
item 102 key (418 INODE_REF 264) itemoff 11016 itemsize 13
index 25 namelen 3 name: fc7
item 103 key (418 EXTENT_DATA 0) itemoff 9470 itemsize 1546
generation 38 type 0 (inline)
inline extent data size 1525 ram_bytes 1525 compression 0 (none)
Then when test 004 invoked fiemap against the file it got a non-zero
physical offset:
$ filefrag -v /mnt/p0/d4/d7/fc7
Filesystem type is: 9123683e
File size of /mnt/p0/d4/d7/fc7 is 1525 (1 block of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 4095: 18446744073709551614.. 4093: 4096: last,not_aligned,inline,eof
/mnt/p0/d4/d7/fc7: 1 extent found
This resulted in the test failing like this:
btrfs/004 49s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad)
--- tests/btrfs/004.out 2016-08-23 10:17:35.027012095 +0100
+++ /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad 2018-06-18 18:15:02.385872155 +0100
@@ -1,3 +1,10 @@
QA output created by 004
*** test backref walking
-*** done
+./tests/btrfs/004: line 227: [: 7.55578637259143e+22: integer expression expected
+ERROR: 7.55578637259143e+22 is not a valid numeric value.
+unexpected output from
+ /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -s 65536 -P 7.55578637259143e+22 /home/fdmanana/btrfs-tests/scratch_1
...
(Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad' to see the entire diff)
Ran: btrfs/004
The large number in scientific notation reported as an invalid numeric
value is the result from the filter passed to perl which multiplies the
physical offset by the block size reported by fiemap.
So fix this by ensuring the physical offset is always set to 0 when we
are processing an extent with a special block_start value.
Fixes: 9d311e11fc ("Btrfs: fiemap: pass correct bytenr when fm_extent_count is zero")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbInZAAAoJEGCrR//JCVInReoQAIlVIIMt5ZX6wmaKbrjy9Itf
MfgbFihQ/djLnuSPVQ3nztcxF0d66BKHZ9puVjz6+mIHqfDvJTRwZs9nU+sOF/T1
g78fRkM1cxq6ZCkGYAbzyjyo5aC4PnSMP/NQLmwqvi0MXqqrbDoq5ZdP9DHJw39h
L9lD8FM/P7T29Fgp9tq/pT5l9X8VU8+s5KQG1uhB5hii4VL6pD6JyLElDita7rg+
Z7/V7jkxIGEUWF7vGaiR1QTFzEtpUA/exDf9cnsf51OGtK/LJfQ0oiZPPuq3oA/E
LSbt8YQQObc+dvfnGxwgxEg1k5WP5ekj/Wdibv/+rQKgGyLOTz6Q4xK6r8F2ahxs
nyZQBdXqHhJYyKr1H1reUH3mrSgQbE5U5R1i3My0xV2dSn+vtK5vgF21v2Ku3A1G
wJratdtF/kVBzSEQUhsYTw14Un+xhBLRWzcq0cELonqxaKvRQK9r92KHLIWNE7/v
c0TmhFbkZA+zR8HdsaL3iYf1+0W/eYy8PcvepyldKNeW2pVk3CyvdTfY2Z87G2XK
tIkK+BUWbG3drEGG3hxZ3757Ln3a9qWyC5ruD3mBVkuug/wekbI8PykYJS7Mx4s/
WNXl0dAL0Eeu1M8uEJejRAe1Q3eXoMWZbvCYZc+wAm92pATfHVcKwPOh8P7NHlfy
A3HkjIBrKW5AgQDxfgvm
=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlsg598ACgkQxWXV+ddt
WDtG1w//R9/nvAk5A5cbForTXNyxwXAQnz0t2/4Lh5igbfJloqoTZtr47Gvqsvy+
DITU+3BPcyupBuUFLoeivPC+ruKOUmle27Vm62mdZRtyt96kiUiV/m1gbPhFy8lW
DKHK8tvtIoZObo5oNGvRxiuJPjefiChYZMDHokB+MY5ZALSRaIW9opj2WsM+ZAt7
g9CEjeitQcBY68CCpSEVBlQSz+BTZYEDFJGNCmGDxGhaBGZr/ganrkDJ75cG6U10
LnOZ6LDHNxGMqUm4wnhfmpHtVcIJiBF+gOyTumBPtFSoLnBverl684xizglpoq6d
fnUP8Y6XR9JA4OCZvo310yvX9nyqgb0H2h+APO0f7jRRcJo0QSKZ/qZR+XZCk3PU
91HtBopcGs8gGQUkRdAE7TMCiIEzL1eNOXHvsiILCObq1i7iNCe7Dzx6M6Gfgep8
a3IcoVmSw1DFpln2ZxTQw9viAib41iU46XHXz7W7rGPulF5QdXGo5ScORRG6HBLE
nZsXdTkrCPMJyN2bIhU6YJOK9rb9TjD4lUtnvzT8t1CfUsxQT4AsJykaYr9BwF2D
Z4rBruUAQ3OmvXJDfGG4T5YCAdPBN+xBcxCeyrDZSD0r6YPQGoF0dlvHmvP0J78D
oGkD1bb/gjcvsPJxtTQ4QWEh0oqZiDfRt4qdgO46vhba0onzQFw=
=X2zA
-----END PGP SIGNATURE-----
Merge tag 'for-4.18-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- error handling fixup for one of the new ioctls from 1st pull
- fix for device-replace that incorrectly uses inode pages and can mess
up compressed extents in some cases
- fiemap fix for reporting incorrect number of extents
- vm_fault_t type conversion
* tag 'for-4.18-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: scrub: Don't use inode pages for device replace
btrfs: change return type of btrfs_page_mkwrite to vm_fault_t
Btrfs: fiemap: pass correct bytenr when fm_extent_count is zero
btrfs: Check error of btrfs_iget in btrfs_search_path_in_tree_user
Pull the timespec64 conversion from Deepa Dinamani:
"The series aims to switch vfs timestamps to use
struct timespec64. Currently vfs uses struct timespec,
which is not y2038 safe.
The flag patch applies cleanly. I've not seen the timestamps
update logic change often. The series applies cleanly on 4.17-rc6
and linux-next tip (top commit: next-20180517).
I'm not sure how to merge this kind of a series with a flag patch.
We are targeting 4.18 for this.
Let me know if you have other suggestions.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
I've tried to keep the conversions with the script simple, to
aid in the reviews. I've kept all the internal filesystem data
structures and function signatures the same.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions."
I've pulled it into a branch based on top of the NFS changes that
are now in mainline, so I could resolve the non-obvious conflict
between the two while merging.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[BUG]
Btrfs can create compressed extent without checksum (even though it
shouldn't), and if we then try to replace device containing such extent,
the result device will contain all the uncompressed data instead of the
compressed one.
Test case already submitted to fstests:
https://patchwork.kernel.org/patch/10442353/
[CAUSE]
When handling compressed extent without checksum, device replace will
goe into copy_nocow_pages() function.
In that function, btrfs will get all inodes referring to this data
extents and then use find_or_create_page() to get pages direct from that
inode.
The problem here is, pages directly from inode are always uncompressed.
And for compressed data extent, they mismatch with on-disk data.
Thus this leads to corrupted compressed data extent written to replace
device.
[FIX]
In this attempt, we could just remove the "optimization" branch, and let
unified scrub_pages() to handle it.
Although scrub_pages() won't bother reusing page cache, it will be a
little slower, but it does the correct csum checking and won't cause
such data corruption caused by "optimization".
Note about the fix: this is the minimal fix that can be backported to
older stable trees without conflicts. The whole callchain from
copy_nocow_pages() can be deleted, and will be in followup patches.
Fixes: ff023aac31 ("Btrfs: add code to scrub to copy read data to another disk")
CC: stable@vger.kernel.org # 4.4+
Reported-by: James Harvey <jamespharvey20@gmail.com>
Reviewed-by: James Harvey <jamespharvey20@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ remove code removal, add note why ]
Signed-off-by: David Sterba <dsterba@suse.com>
Use the new return type vm_fault_t for fault handler. For now, this is
just documenting that the function returns a VM_FAULT value rather than
an errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Reference commit 1c8f422059 ("mm: change return type to vm_fault_t")
vmf_error() is the newly introduced inline function in 4.17-rc6.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
fm_mapped_extents is not correct when fm_extent_count is 0
Like:
# mount /dev/vdb5 /mnt/btrfs
# dd if=/dev/zero bs=16K count=4 oflag=dsync of=/mnt/btrfs/file
# xfs_io -c "fiemap -v" /mnt/btrfs/file
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 25088..25215 128 0x1
When user space wants to get the number of file extents,
set fm_extent_count to 0 to run fiemap and then read fm_mapped_extents.
In the above example, fiemap will return with fm_mapped_extents set to 4,
but it should be 1 since there's only one entry in the output.
[REASON]
The problem seems to be that disko is only set if
fieinfo->fi_extents_max is set. And this member is initialized, in the
generic ioctl_fiemap function, to the value of used-passed
fm_extent_count. So when the user passes 0 then fi_extent_max is also
set to zero and this causes btrfs to not initialize disko at all.
Eventually this leads emit_fiemap_extent being called with a bogus
'phys' argument preventing proper fiemap entries merging.
[FIX]
Move the disko initialization earlier in extent_fiemap making it
independent of user-passed arguments, allowing emit_fiemap_extent to
properly handle consecutive extent entries.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The patch introducing the ioctl was not the latest version at the time
of merging to the mainline and needs a fixup from this patch.
Fixes: ba637a252d30 ("btrfs: Check error of btrfs_iget() in btrfs_search_path_in_tree_user")
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlsVV6wACgkQxWXV+ddt
WDsaOhAAnrG3o/Bkn4loifYjiWQoArswwVJ2m5MvG14oPcn/c6wCUlE6mHdEsT8l
WgltSRSd/3hJ1BcuWjhcR8RSLBRSaPcw4FAHikAdOWMrLXSKfA+quT/upXD00iDS
+bnHoknc5vvk+Ow0KyGODAeMYfJm8gGB43BeVDr/mgrVRrwYY9r14s+6LX897NOT
qObdxBjtedua0uIYZX5673siFaSbvJNQyGn6iKO9Ww+7bkWjgKO8qY8/3/gEaJn1
q1303Oo65VOXQQKZed+NjPNakpqRmABaN79qTwWMnUI4qYBKi651a7sr5HljDpmc
szY3uF/E7AOfJSDeTBdglFR1eQgv20ceeIx7FN0n6iUbuIVH9P85mBF6f76Hivpq
fA39uPYxWwWq8RxmC09yqoTkuNS0zAQhov4n8XO0q/81Gfek0RpR+LMK15W02Ur8
+5Pazkgz+xRYRPhpExe75pbM5N31KFJdf+4wpXeZoXKGTeiiCl/SZV3NzyUtemGg
eN7ltHD/Y9iNpx7sgHn+2veXwn6psDad8ORxIlRyKDeot2pNZ4lnekPbqMC/IwAz
hF3ZpcEo8v2Q2kqwCqw5evq4NSOvfG0cEuIqAKir1AgTn2nPH99qRSR1He9kluap
GBPTPXNgBrhhdsh5kltI6CJcGE46bHsLG4LI5WvRs+wOtyaG5Ww=
=jIvf
-----END PGP SIGNATURE-----
Merge tag 'for-4.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible features:
- added support for the ioctl FS_IOC_FSGETXATTR, per-inode flags,
successor of GET/SETFLAGS; now supports only existing flags:
append, immutable, noatime, nodump, sync
- 3 new unprivileged ioctls to allow users to enumerate subvolumes
- dedupe syscall implementation does not restrict the range to 16MiB,
though it still splits the whole range to 16MiB chunks
- on user demand, rmdir() is able to delete an empty subvolume,
export the capability in sysfs
- fix inode number types in tracepoints, other cleanups
- send: improved speed when dealing with a large removed directory,
measurements show decrease from 2000 minutes to 2 minutes on a
directory with 2 million entries
- pre-commit check of superblock to detect a mysterious in-memory
corruption
- log message updates
Other changes:
- orphan inode cleanup improved, does no keep long-standing
reservations that could lead up to early ENOSPC in some cases
- slight improvement of handling snapshotted NOCOW files by avoiding
some unnecessary tree searches
- avoid OOM when dealing with many unmergeable small extents at flush
time
- speedup conversion of free space tree representations from/to
bitmap/tree
- code refactoring, deletion, cleanups:
+ delayed refs
+ delayed iput
+ redundant argument removals
+ memory barrier cleanups
+ remove a redundant mutex supposedly excluding several ioctls to
run in parallel
- new tracepoints for blockgroup manipulation
- more sanity checks of compressed headers"
* tag 'for-4.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (183 commits)
btrfs: Add unprivileged version of ino_lookup ioctl
btrfs: Add unprivileged ioctl which returns subvolume's ROOT_REF
btrfs: Add unprivileged ioctl which returns subvolume information
Btrfs: clean up error handling in btrfs_truncate()
btrfs: Factor out write portion of btrfs_get_blocks_direct
btrfs: Factor out read portion of btrfs_get_blocks_direct
btrfs: return ENOMEM if path allocation fails in btrfs_cross_ref_exist
btrfs: raid56: Remove VLA usage
btrfs: return error value if create_io_em failed in cow_file_range
btrfs: drop useless member qgroup_reserved of btrfs_pending_snapshot
btrfs: drop unused parameter qgroup_reserved
btrfs: balance dirty metadata pages in btrfs_finish_ordered_io
btrfs: lift some btrfs_cross_ref_exist checks in nocow path
btrfs: Remove fs_info argument from btrfs_uuid_tree_rem
btrfs: Remove fs_info argument from btrfs_uuid_tree_add
Btrfs: remove unused check of skip_locking
Btrfs: remove always true check in unlock_up
Btrfs: grab write lock directly if write_lock_level is the max level
Btrfs: move get root out of btrfs_search_slot to a helper
Btrfs: use more straightforward extent_buffer_uptodate check
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nga/
-----END PGP SIGNATURE-----
Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- clean up how we pass around gfp_t and
blk_mq_req_flags_t (Christoph)
- prepare us to defer scheduler attach (Christoph)
- clean up drivers handling of bounce buffers (Christoph)
- fix timeout handling corner cases (Christoph/Bart/Keith)
- bcache fixes (Coly)
- prep work for bcachefs and some block layer optimizations (Kent).
- convert users of bio_sets to using embedded structs (Kent).
- fixes for the BFQ io scheduler (Paolo/Davide/Filippo)
- lightnvm fixes and improvements (Matias, with contributions from Hans
and Javier)
- adding discard throttling to blk-wbt (me)
- sbitmap blk-mq-tag handling (me/Omar/Ming).
- remove the sparc jsflash block driver, acked by DaveM.
- Kyber scheduler improvement from Jianchao, making it more friendly
wrt merging.
- conversion of symbolic proc permissions to octal, from Joe Perches.
Previously the block parts were a mix of both.
- nbd fixes (Josef and Kevin Vigor)
- unify how we handle the various kinds of timestamps that the block
core and utility code uses (Omar)
- three NVMe pull requests from Keith and Christoph, bringing AEN to
feature completeness, file backed namespaces, cq/sq lock split, and
various fixes
- various little fixes and improvements all over the map
* tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits)
blk-mq: update nr_requests when switching to 'none' scheduler
block: don't use blocking queue entered for recursive bio submits
dm-crypt: fix warning in shutdown path
lightnvm: pblk: take bitmap alloc. out of critical section
lightnvm: pblk: kick writer on new flush points
lightnvm: pblk: only try to recover lines with written smeta
lightnvm: pblk: remove unnecessary bio_get/put
lightnvm: pblk: add possibility to set write buffer size manually
lightnvm: fix partial read error path
lightnvm: proper error handling for pblk_bio_add_pages
lightnvm: pblk: fix smeta write error path
lightnvm: pblk: garbage collect lines with failed writes
lightnvm: pblk: rework write error recovery path
lightnvm: pblk: remove dead function
lightnvm: pass flag on graceful teardown to targets
lightnvm: pblk: check for chunk size before allocating it
lightnvm: pblk: remove unnecessary argument
lightnvm: pblk: remove unnecessary indirection
lightnvm: pblk: return NVM_ error on failed submission
lightnvm: pblk: warn in case of corrupted write buffer
...
Add unprivileged version of ino_lookup ioctl BTRFS_IOC_INO_LOOKUP_USER
to allow normal users to call "btrfs subvolume list/show" etc. in
combination with BTRFS_IOC_GET_SUBVOL_INFO/BTRFS_IOC_GET_SUBVOL_ROOTREF.
This can be used like BTRFS_IOC_INO_LOOKUP but the argument is
different. This is because it always searches the fs/file tree
correspoinding to the fd with which this ioctl is called and also
returns the name of bottom subvolume.
The main differences from original ino_lookup ioctl are:
1. Read + Exec permission will be checked using inode_permission()
during path construction. -EACCES will be returned in case
of failure.
2. Path construction will be stopped at the inode number which
corresponds to the fd with which this ioctl is called. If
constructed path does not exist under fd's inode, -EACCES
will be returned.
3. The name of bottom subvolume is also searched and filled.
Note that the maximum length of path is shorter 256 (BTRFS_VOL_NAME_MAX+1)
bytes than ino_lookup ioctl because of space of subvolume's name.
Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
[ style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add unprivileged ioctl BTRFS_IOC_GET_SUBVOL_ROOTREF which returns
ROOT_REF information of the subvolume containing this inode except the
subvolume name (this is because to prevent potential name leak). The
subvolume name will be gained by user version of ino_lookup ioctl
(BTRFS_IOC_INO_LOOKUP_USER) which also performs permission check.
The min id of root ref's subvolume to be searched is specified by
@min_id in struct btrfs_ioctl_get_subvol_rootref_args. After the search
ends, @min_id is set to the last searched root ref's subvolid + 1. Also,
if there are more root refs than BTRFS_MAX_ROOTREF_BUFFER_NUM,
-EOVERFLOW is returned. Therefore the caller can just call this ioctl
again without changing the argument to continue search.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
[ style fixes and struct item renames ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add new unprivileged ioctl BTRFS_IOC_GET_SUBVOL_INFO which returns
the information of subvolume containing this inode.
(i.e. returns the information in ROOT_ITEM and ROOT_BACKREF.)
Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
[ minor style fixes, update struct comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Convert btrfs to embedded bio sets.
Acked-by: Chris Mason <clm@fb.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
btrfs_truncate() uses two variables for error handling, ret and err (if
this sounds familiar, it's because btrfs_truncate_inode_items() did
something similar). This is error prone, as was made evident by "Btrfs:
fix error handling in btrfs_truncate()". We only have err because we
don't want to mask an error if we call btrfs_update_inode() and
btrfs_end_transaction(), so let's make that its own scoped return
variable and use ret everywhere else.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the read side is extracted into its own function, do the same
to the write side. This leaves btrfs_get_blocks_direct_write with the
sole purpose of handling common locking required. Also flip the
condition in btrfs_get_blocks_direct_write so that the write case
comes first and we check for if (Create) rather than if (!create). This
is purely subjective but I believe makes reading a bit more "linear".
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently this function handles both the READ and WRITE dio cases. This
is facilitated by a bunch of 'if' statements, a goto short-circuit
statement and a very perverse aliasing of "!created"(READ) case
by setting lockstart = lockend and checking for lockstart < lockend for
detecting the write. Let's simplify this mess by extracting the
READ-only code into a separate __btrfs_get_block_direct_read function.
This is only the first step, the next one will be to factor out the
write side as well. The end goal will be to have the common locking/
unlocking code in btrfs_get_blocks_direct and then it will call either
the read|write subvariants. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The error code does not match the reason of failure and may confuse the
callers.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the quest to remove all stack VLA usage from the kernel[1], this
allocates the working buffers during regular init, instead of using stack
space. This refactors the allocation code a bit to make it easier
to review.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In cow_file_range(), create_io_em() may fail, but its return value is
not recorded. Then return value may be 0 even it failed which is a
wrong behavior.
Let cow_file_range() return PTR_ERR(em) if create_io_em() failed.
Fixes: 6f9994dbab ("Btrfs: create a helper to create em for IO")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since there is no more use of qgroup_reserved member in struct
btrfs_pending_snapshot, remove it.
Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 7775c8184e ("btrfs: remove unused parameter from
btrfs_subvolume_release_metadata") parameter qgroup_reserved is not used
by caller of function btrfs_subvolume_reserve_metadata. So remove it.
Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[Problem description and how we fix it]
We should balance dirty metadata pages at the end of
btrfs_finish_ordered_io, since a small, unmergeable random write can
potentially produce dirty metadata which is multiple times larger than
the data itself. For example, a small, unmergeable 4KiB write may
produce:
16KiB dirty leaf (and possibly 16KiB dirty node) in subvolume tree
16KiB dirty leaf (and possibly 16KiB dirty node) in checksum tree
16KiB dirty leaf (and possibly 16KiB dirty node) in extent tree
Although we do call balance dirty pages in write side, but in the
buffered write path, most metadata are dirtied only after we reach the
dirty background limit (which by far only counts dirty data pages) and
wakeup the flusher thread. If there are many small, unmergeable random
writes spread in a large btree, we'll find a burst of dirty pages
exceeds the dirty_bytes limit after we wakeup the flusher thread - which
is not what we expect. In our machine, it caused out-of-memory problem
since a page cannot be dropped if it is marked dirty.
Someone may worry about we may sleep in btrfs_btree_balance_dirty_nodelay,
but since we do btrfs_finish_ordered_io in a separate worker, it will not
stop the flusher consuming dirty pages. Also, we use different worker for
metadata writeback endio, sleep in btrfs_finish_ordered_io help us throttle
the size of dirty metadata pages.
[Reproduce steps]
To reproduce the problem, we need to do 4KiB write randomly spread in a
large btree. In our 2GiB RAM machine:
1) Create 4 subvolumes.
2) Run fio on each subvolume:
[global]
direct=0
rw=randwrite
ioengine=libaio
bs=4k
iodepth=16
numjobs=1
group_reporting
size=128G
runtime=1800
norandommap
time_based
randrepeat=0
3) Take snapshot on each subvolume and repeat fio on existing files.
4) Repeat step (3) until we get large btrees.
In our case, by observing btrfs_root_item->bytes_used, we have 2GiB of
metadata in each subvolume tree and 12GiB of metadata in extent tree.
5) Stop all fio, take snapshot again, and wait until all delayed work is
completed.
6) Start all fio. Few seconds later we hit OOM when the flusher starts
to work.
It can be reproduced even when using nocow write.
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
In nocow path, we check if the extent is snapshotted in
btrfs_cross_ref_exist(). We can do the similar check earlier and avoid
unnecessary search into extent tree.
A fio test on a Intel D-1531, 16GB RAM, SSD RAID-5 machine as follows:
[global]
group_reporting
time_based
thread=1
ioengine=libaio
bs=4k
iodepth=32
size=64G
runtime=180
numjobs=8
rw=randwrite
[file1]
filename=/mnt/nocow/testfile
IOPS result: unpatched patched
1 fio round: 46670 46958
snapshot
2 fio round: 51826 54498
3 fio round: 59767 61289
After snapshot, the first fio get about 5% performance gain. As we
continually write to the same file, all writes will resume to nocow mode
and eventually we have no performance gain.
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function always takes a transaction handle which contains a
reference to the fs_info. Use that and remove the extra argument.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ rename the function ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function always takes a transaction handle which contains a
reference to the fs_info. Use that and remove the extra argument.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The check is superfluous since all callers who set search_for_commit
also have skip_locking set.
ASSERT() is put in place to ensure skip_locking is set by new callers.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
