Never use sg++, always use sg = sg_next(sg). Scatterlist entries can
be combined if the memory is contiguous but sg++ won't know about that.
As far as I can tell cx88 and ivtv are really broken because of this,
and bttv and cx25821 are OK because vb1 doesn't combine scatterlist
entries.
But regardless, sg++ should never be used, only sg_next is safe.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In smipcie.c, the function i2c_bit_add_bus() is called. This
function is defined by the I2C bit-banging interfaces enabled
with CONFIG_I2C_ALGOBIT.
As there was no dependency in Kconfig, CONFIG_I2C_ALGOBIT could
be set to "m" while CONFIG_DVB_SMIPCIE was set to "y", resulting
in a build error due to an undefined reference.
This patch adds the dependency on CONFIG_I2C_ALGOBIT in Kconfig
by selecting it when CONFIG_DVB_SMIPCIE is selected.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The IRQs have to be acknowledged before they are serviced, otherwise some events
may be skipped. Also, acknowledging IRQs just before returning from the handler
doesn't leave enough time for the device to deassert the INTx line, and for
bridges to propagate this change. This resulted in twice the IRQ rate on ARMv6
dual core CPU.
Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl>
Acked-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Tested-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch fix spelling typo in printk and Kconfig within
various part of kernel sources.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There's no such thing as "list_struct".
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
this patch adds support for using vb2_start_streaming_called()
for cx88-blackbird driver.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.
Replace all references to the old definitions in pci drivers.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix many sparse warnings:
drivers/media/pci/saa7164/saa7164-core.c:97:18: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:122:31: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:122:31: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/saa7164/saa7164-core.c:122:31: expected unsigned char [noderef] [usertype] <asn:2>*bufcpu
drivers/media/pci/saa7164/saa7164-core.c:122:31: got unsigned char [usertype] *<noident>
drivers/media/pci/saa7164/saa7164-core.c:282:44: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:286:38: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:286:35: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-core.c:286:35: expected unsigned char [noderef] [usertype] <asn:2>*p
drivers/media/pci/saa7164/saa7164-core.c:286:35: got unsigned char [usertype] *<noident>
drivers/media/pci/saa7164/saa7164-core.c:352:44: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:527:53: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:129:30: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:133:38: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:133:72: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:134:35: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:287:61: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:288:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:289:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:290:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:291:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:292:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:293:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:294:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-fw.c:548:52: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:548:52: expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:548:52: got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-fw.c:579:44: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:579:44: expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:579:44: got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-fw.c:597:44: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:597:44: expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:597:44: got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-bus.c:36:36: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-bus.c:41:36: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-bus.c:151:19: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:151:19: expected unsigned short [unsigned] [usertype] size
drivers/media/pci/saa7164/saa7164-bus.c:151:19: got restricted __le16 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:152:22: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:152:22: expected unsigned int [unsigned] [usertype] command
drivers/media/pci/saa7164/saa7164-bus.c:152:22: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:153:30: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:153:30: expected unsigned short [unsigned] [usertype] controlselector
drivers/media/pci/saa7164/saa7164-bus.c:153:30: got restricted __le16 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:172:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:173:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:206:28: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:287:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:287:9: expected unsigned int [unsigned] val
drivers/media/pci/saa7164/saa7164-bus.c:287:9: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:339:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:340:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:463:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:463:9: expected unsigned int [unsigned] val
drivers/media/pci/saa7164/saa7164-bus.c:463:9: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:466:21: warning: cast to restricted __le16
drivers/media/pci/saa7164/saa7164-bus.c:467:24: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:468:32: warning: cast to restricted __le16
drivers/media/pci/saa7164/saa7164-buffer.c:122:18: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:122:18: expected unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:122:18: got void *
drivers/media/pci/saa7164/saa7164-buffer.c:127:21: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:127:21: expected unsigned long long [noderef] [usertype] <asn:2>*pt_cpu
drivers/media/pci/saa7164/saa7164-buffer.c:127:21: got void *
drivers/media/pci/saa7164/saa7164-buffer.c:134:20: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-buffer.c:156:63: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:156:63: expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:156:63: got unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:179:57: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:179:57: expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:179:57: got unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:180:56: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:180:56: expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:180:56: got unsigned long long [noderef] [usertype] <asn:2>*pt_cpu
drivers/media/pci/saa7164/saa7164-buffer.c:84:17: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-buffer.c:147:31: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-buffer.c:148:17: warning: dereference of noderef expression
Most are caused by pointers marked as __iomem when they aren't or not marked as
__iomem when they should.
Also note that readl/writel already do endian conversion, so there is no need to
do it again.
saa7164_bus_set/get were a bit tricky: you have to make sure the msg endian
conversion is done at the right time, and that the code isn't using fields that
are still little endian instead of cpu-endianness.
The approach chosen is to convert just before writing to the ring buffer
and to convert it back right after reading from the ring buffer.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It makes no sense to block the SOLO_IRQ_ENCODER interrupt from being sent while
processing an earlier interrupt. New interrupts will just kick the thread
again once it is done processing.
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
[hans.verkuil@cisco.com: fix commit description]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Before, it was called from individual encoder (de)init procedures, which
lead to spare threads running (which were actually lost, leaked).
The current fix uses trivial approach, and the downside is that the
processing thread is working always, even when there's no consumer.
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.
This use has a mask then shift which is not the normal style.
Move the shift before the mask to match nearly all the other
uses in kernel.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add a new helper function snd_pcm_stop_xrun() to the standard sequnce
lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the
existing open codes with this helper.
The function checks the PCM running state to prevent setting the wrong
state, too, for more safety.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
smipcie.c:950:31: warning: Using plain integer as NULL pointer
smipcie.c:973:31: warning: Using plain integer as NULL pointer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
bttv-cards.c:3874:55: warning: incorrect type in initializer (different base types)
Also clean up the code a little by adding spaces.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There is a new PCIe bridge chip(from SMI) used in DVBSky V3 seris cards, include S950 V3 and S952 V3 cards.
SMI pcie bridge chip is PCIe 1.1 compliant, supports MSI feature.
Main interface blocks:
1>Two DVB transport stream input ports(ts0,ts1).
2>Two I2C master bus(i2c0, i2c1).
3>IR controller.
4>reset pins and other GPIOs.
DVBSky S950 V3 card has a single channel of dvb-s/s2.
1>Frontend: tuner: M88TS2022, demod: M88DS3103
2>PCIe bridge: SMI PCIe
The current driver does not support SMI IR function.
[mchehab@osg.samsung.com: fix Makefile to find m88ts2022.h]
Signed-off-by: Max nibble <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
X-Patchwork-Delegate: m.chehab@samsung.com
As pointed by smatch:
drivers/media/pci/cx23885/cx23885-dvb.c:1066 dvb_register() error: we previously assumed 'fe0->dvb.frontend' could be null (see line 1060)
drivers/media/pci/cx23885/cx23885-dvb.c:1990 cx23885_dvb_register() error: we previously assumed 'fe0' could be null (see line 1975)
What happens is that the error handling logic when a frontend
register fails sometimes keep doing the work, as if it didn't
fail.
This could potentially cause an OOPS. So, simplify the logic
a little bit and return an error if frontend fails before
trying to setup VB2 queue.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
TechnoTrend CT2-4500 CI is a PCIe device with DVB-T2/C tuner. It is
similar to DVBSky T980C, just with different PCI ID and remote controller.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use dev_err instead of pt1_printk
o reduce object code size
o remove now unused pt1_printk macro
Neaten dev_<level> uses in pt3
o add missing newlines
o align arguments
o remove unnecessary OOM messages as there's a generic one
o typo fixes in messages
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now works with both NTSC and PAL. Tested with CC/XDS for NTSC and
teletext/WSS for PAL. The start lines were wrong, the WSS signal
wasn't captured and there was no difference between NTSC and PAL
w.r.t. the count[] values so NTSC returned way too many lines.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Move pci_disable_device() down otherwise it will complain about an
unfreed irq.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Don't mix UNSET and TUNER_ABSENT: you have to pick one or the other. For
this driver selecting UNSET to represent an absent tuner resulting in
the fewest changes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make sure that changing the standard or format is not allowed while
one or more of the video, vbi or mpeg vb2 queues are busy.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The vb2 framework knows if streaming is in progress, no need to use
a separate field for that.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The width, height and field values are core fields since both vbi, video
and blackbird use the same video input.
Move those fields to the correct struct.
Also fix the field checks in the try_fmt functions: add V4L2_FIELD_SEQ_BT/TB
support and map incorrect field values to a correct field value instead of
returning an error.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There is no reason to dump the sram code to the kernel log when you
stop streaming. Remove those calls to cx88_sram_channel_dump.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The timeout is way too small. Especially complicated command like
CX2341X_ENC_STOP_CAPTURE takes much more time than 10 ms. Increase the
timeout to 1 second, just as ivtv does (the cx88-blackbird has the
same IP core for MPEG compression as ivtv).
This solves a nasty issue where STOP_CAPTURE would timeout and the
mailbox is left in a busy state, making it impossible to start streaming
a second time without reloading the driver first.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
btcx-risc is for the bt8xx driver and other drivers shouldn't depend
on it. There is no benefit to use that module just to do a
pci_zalloc_consistent.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove this function. This makes all vb2 queues behave the same, which
simplifies comparing the various vb2 queue op implementations.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Don't return -1, return a proper error.
Replace dprintk(0, ...) by pr_err since firmware load errors should just be
reported as an error.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As usual, this patch is very large due to the fact that half a vb2 conversion
isn't possible. And since this affects blackbird, alsa, core, dvb, vbi and
video the changes are all over.
What made this more difficult was the peculiar way the risc program was setup.
The driver allowed for running out of buffers in which case the DMA would stop
and restart when the next buffer was queued. There was also a complicated
timeout system for when buffers weren't filled. This was replaced by a much
simpler scheme where there is always one buffer around and the DMA will just
cycle that buffer until a new buffer is queued. In that case the previous
buffer will be chained to the new buffer. An interrupt is generated at the
start of the new buffer telling the driver that the previous buffer can be
passed on to userspace.
Much simpler and more robust.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The alsa driver uses videobuf low-level functions that are not
available in vb2, so replace them by driver-specific functions.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This list is only used if the width, height and/or format of a buffer has
changed, but that can never happen. Remove it and all associated code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This is a duplicate of dev->fmt and can be removed. As a consequence a
lot of tests that check if the format has changed midstream can be
removed as well: the format cannot change midstream, so this is a bogus
check.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
DVBSky T9580 uses Integrated CX23885 IR controller to decode IR signal.
The IR type of DVBSky remote control is RC5.
Signed-off-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add CI support for DVBSky T980C card. The new host device independent CIMaX SP2 I2C driver was used to implement it.
IRQ handling is not implemented at this point. It could be used to detect the CAM insertion/removal instantly.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If the CI chip has an I2C driver, we need to store I2C client into state.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds basic support for DVBSky T980C card. CI interface is not supported.
DVBSky T980C is a PCIe card with the following components:
- CX23885 PCIe bridge
- Si2168-A20 demodulator
- Si2158-A20 tuner
- CIMaX SP2 CI chip
The demodulator and tuner need firmware. They're the same as used with TT CT2-4650 CI:
https://www.mail-archive.com/linux-media@vger.kernel.org/msg78033.html
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
tw68 doesn't use i2c at all, so remove this bogus dependency to prevent
this warning:
warning: (CAN_PEAK_PCIEC && SFC && IGB && VIDEO_TW68 && DRM && FB_DDC && FB_VIA) selects I2C_ALGOBIT which has unmet direct dependencies (I2C)
CC [M] drivers/i2c/algos/i2c-algo-bit.o
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_bus':
../drivers/i2c/algos/i2c-algo-bit.c:658:33: error: 'i2c_add_adapter' undeclared (first use in this function)
../drivers/i2c/algos/i2c-algo-bit.c:658:33: note: each undeclared identifier is reported only once for each function it appears in
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_numbered_bus':
../drivers/i2c/algos/i2c-algo-bit.c:664:33: error: 'i2c_add_numbered_adapter' undeclared (first use in this function)
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_bus':
../drivers/i2c/algos/i2c-algo-bit.c:659:1: warning: control reaches end of non-void function [-Wreturn-type]
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_numbered_bus':
../drivers/i2c/algos/i2c-algo-bit.c:665:1: warning: control reaches end of non-void function [-Wreturn-type]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
See include/linux/interrupt.h:
"This flag is a NOOP and scheduled to be removed"
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The config structs used for DVBSky T9580 were not initialized. This patch fixes that.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Get rid of 'module_is_live' usage.
on x86_64:
when CONFIG_MODULES is not enabled:
../drivers/media/pci/pt3/pt3.c: In function 'pt3_attach_fe':
../drivers/media/pci/pt3/pt3.c:433:6: error: implicit declaration of function 'module_is_live' [-Werror=implicit-function-declaration]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Akihiro Tsukada <tskd08@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This is actually a coding style issue, but it was generating lots
of smatch warnings:
drivers/media/pci/cx88/cx88-cards.c:1513:37: warning: Initializer entry defined twice
drivers/media/pci/cx88/cx88-cards.c:1517:19: also defined here
drivers/media/pci/cx88/cx88-cards.c:1533:36: warning: Initializer entry defined twice
drivers/media/pci/cx88/cx88-cards.c:1538:19: also defined here
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Those symbols are used only at saa7164-core.
drivers/media/pci/saa7164/saa7164-core.c:55:14: warning: symbol 'fw_debug' was not declared. Should it be static?
drivers/media/pci/saa7164/saa7164-core.c:75:14: warning: symbol 'print_histogram' was not declared. Should it be static?
drivers/media/pci/saa7164/saa7164-core.c:83:14: warning: symbol 'guard_checking' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
DVBSky T9580 is a dual tuner card with one DVB-T2/C tuner and one DVB-S2 tuner. It contains the following components:
- PCIe bridge: Conexant CX23885
- Demod for terrestrial/cable: Silicon Labs Si2168-A30
- Tuner for terrestrial/cable: Silicon Labs Si2158-A20
- Demod for sat: Montage DS3103
- Tuner for sat: Montage TS2022
This patch depends on Max Nibble's patch for m88ds3103 (see patchwork 25312: https://patchwork.linuxtv.org/patch/25312/ ).
3 firmwares are needed:
- Si2168-A30 demod and Si2158-A20 tuner: same as TechnoTrend CT2-4400, https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html
- Montage DS3103 demod: same as PCTV 461e, Antti has it on his LinuxTV project page: http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/
IR receiver is not supported.
Values in cx23885_gpio_setup, cx23885_card_setup and dvbsky_t9580_set_voltage as well as the EEPROM read function are taken from the manufacturer provided semi-open source driver. The drivers in question are Linux GPL'd media tree drivers for cx23885 modified by Max Nibble (nibble.max@gmail.com) with proprietary tuner/demod drivers. Max is aware of this patch and has approved my use of the values in this patch.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Setting the LNB voltage requires setting some GPIOs on the cx23885 with some boards before calling the actual set_voltage function in the demod driver. Add a function pointer into state for that case.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Prepare cx23885 driver for handling I2C client that is needed for certain demodulators and tuners (for example Si2168 and Si2157). I2C client for tuner and demod stored in state and unregistering of the I2C devices added into dvb_unregister.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/pci/pt3/pt3.c:862:1: warning: symbol 'pt3_pm_ops' was not declared. Should it be static?
Cc: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds support for PT3 PCIe cards.
PT3 has an FPGA PCIe bridge chip, a TC90522 demod chip and
a VA4M6JC2103 tuner module which contains two QM1D1C0042 chips for ISDB-S
and two MxL301RF's for ISDB-T.
It can receive and deliver 4 (2x ISDB-S, 2x ISDB-T) streams simultaneously,
and a kthread is used per stream to poll incoming data,
because PT3 does not have interrupts.
As an antenna input for each delivery system is split in the tuner module
and shared between the corresponding two tuner chips,
LNB/LNA controls that the FPGA chip provides are (naturally) shared as well.
The tuner chips also share the power line in the tuner module,
which is controlled on/off by a GPIO pin of the demod chip.
As with the demod chip and the ISDB-T tuner chip,
the init sequences/register settings for those chips are not disclosed
and stored in a private memory of the FPGA,
PT3 driver executes the init of those chips on behalf of their drivers.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/pci/saa7134/saa7134-go7007.c: In function ‘saa7134_go7007_interface_reset’:
drivers/media/pci/saa7134/saa7134-go7007.c:147:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
drivers/media/pci/saa7134/saa7134-go7007.c:247:17: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7134/saa7134-go7007.c:247:17: expected unsigned int [unsigned] val
drivers/media/pci/saa7134/saa7134-go7007.c:247:17: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7134/saa7134-go7007.c:252:17: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7134/saa7134-go7007.c:252:17: expected unsigned int [unsigned] val
drivers/media/pci/saa7134/saa7134-go7007.c:252:17: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7134/saa7134-go7007.c:299:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7134/saa7134-go7007.c:299:9: expected unsigned int [unsigned] val
drivers/media/pci/saa7134/saa7134-go7007.c:299:9: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7134/saa7134-go7007.c:300:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7134/saa7134-go7007.c:300:9: expected unsigned int [unsigned] val
drivers/media/pci/saa7134/saa7134-go7007.c:300:9: got restricted __le32 [usertype] <noident>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
All error/warnings:
drivers/built-in.o: In function `saa7134_go7007_fini':
>> saa7134-go7007.c:(.text+0x3b628b): undefined reference to `go7007_snd_remove'
drivers/built-in.o: In function `saa7134_go7007_interface_reset':
>> saa7134-go7007.c:(.text+0x3b659a): undefined reference to `go7007_read_interrupt'
drivers/built-in.o: In function `saa7134_go7007_init':
>> saa7134-go7007.c:(.text+0x3b65fa): undefined reference to `go7007_alloc'
>> saa7134-go7007.c:(.text+0x3b66ed): undefined reference to `go7007_boot_encoder'
>> saa7134-go7007.c:(.text+0x3b66fe): undefined reference to `go7007_register_encoder'
drivers/built-in.o: In function `saa7134_go7007_irq_ts_done':
>> saa7134-go7007.c:(.text+0x3b6c2a): undefined reference to `go7007_parse_video_stream'
>> saa7134-go7007.c:(.text+0x3b6c86): undefined reference to `go7007_parse_video_stream'
This happens when:
- VIDEO_SAA7134 is either 'm' or 'y'
- VIDEO_GO7007 is not selected.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds support to saa7134 for 'WIS Voyager or compatible' PCI boards
such as the Sensoray model 614 with which this patch was tested. It is a
saa7134-based PCI board with a go7007 MPEG encoder. This was a patch when the
go7007 was still in staging and was not applied when go7007 was moved to
drivers/media since it needed more work.
That work is now done and this last piece of go7007 support can now go in.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The saa7134 driver missed capturing line 23 of the VBI area for the
50 Hz formats. Include that line in the VBI capture.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The norm_swidth function was unused and is dropped. It's not clear
what the purpose of that function was.
The norm_maxh function was changed so it tests for 60 Hz standards
rather than for 50 Hz standards. The is the preferred order.
The norm_maxw function was poorly written and used: it gives the maximum
allowed line width for the given standard. For 60 Hz that's 720, but
for 50 Hz that's 768 which allows for 768x576 which gives you square
pixels. For 60 Hz formats it is 640x480 that gives square pixels, so
there is no need to go beyond 720.
The initial width was set using norm_maxh(), which was wrong. Just set
to 720, that's what you normally use. Since the initial standard was
NTSC anyway the initial width was always 720 anyway.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Tested VBI support and discovered that the wrong offset was used.
After this change it is now working. Verified with CC/XDS for NTSC
and WSS/Teletext on PAL.
It also reported the wrong start lines for the second field. That's
now fixed as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are some patches that depends on media-v3.16-rc6.
So, merge back from upstream before applying them.
* linus/master: (1123 commits)
drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
drm/bochs: add missing drm_connector_register call
drm/cirrus: add missing drm_connector_register call
staging: vt6655: buffer overflow in ioctl
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
USB: EHCI: unlink QHs even after the controller has stopped
[SCSI] fix for bidi use after free
[SCSI] fix regression that accidentally disabled block-based tcq
[SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
drm/nouveau/runpm: fix module unload
drm/radeon/px: fix module unload
vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
drm/radeon: don't reset dma on r6xx-evergreen init
drm/radeon: don't reset sdma on CIK init
drm/radeon: don't reset dma on NI/SI init
drm/radeon/dpm: fix resume on mullins
drm/radeon: Disable HDP flush before every CS again for < r600
...
tw_writel maps to writel which maps to __raw_writel(__cpu_to_le32(b),addr).
So tw_writel already calls cpu_to_le32 and it shouldn't be called again
in the code.
Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The code to calculate the maximum number of buffers allowed in 4 MB
is 1) wrong if PAGE_SIZE != 4096 and 2) unnecessarily complex.
Fix and simplify the code.
Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Before you can change the standard or the capture format, make sure the
various vb2_queues aren't in use since you cannot change the buffer size from
underneath a a busy vb2_queue.
Also make sure that the return code of cx23885_set_tvnorm is returned
correctly, otherwise the -EBUSY will be lost.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
It's just as easy to do it in the driver. This dependency only uses a
fraction of the btcx-risc module and doing it directly in the driver
adds only a few lines. The btcx-risc module is really meant for the
bttv driver, not for other drivers.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add missing SEQ_BT/TB support, bottom field is first for all 60 Hz formats,
not just NTSC, restore an overwritten field value and initialize dev->field
correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
As usual, this patch is very large due to the fact that half a vb2 conversion
isn't possible. And since this affects 417, alsa, core, dvb, vbi and video the
changes are all over.
What made this more difficult was the peculiar way the risc program was setup.
The driver allowed for running out of buffers in which case the DMA would stop
and restart when the next buffer was queued. There was also a complicated
timeout system for when buffers weren't filled. This was replaced by a much
simpler scheme where there is always one buffer around and the DMA will just
cycle that buffer until a new buffer is queued. In that case the previous
buffer will be chained to the new buffer. An interrupt is generated at the
start of the new buffer telling the driver that the previous buffer can be
passed on to userspace.
Much simpler and more robust. The old code seems to be copied from the
cx88 driver. But it didn't fit the vb2 ops very well and replacing it with
the new scheme made the code easier to understand. Not to mention that this
patch removes 600 lines of code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sparse is complaining about ngene's bad usage of a __user ptr:
>> drivers/media/pci/ngene/ngene-dvb.c:62:48: sparse: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-dvb.c:62:48: expected unsigned char const [usertype] *buf
drivers/media/pci/ngene/ngene-dvb.c:62:48: got char const [noderef] <asn:1>*buf
As this is intercepting a .write() file ops, we can't just memcpy. We need to use
copy_from_user.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/tw68/tw68-core.c:72:22: warning: symbol 'tw68_pci_tbl' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Refactor and clean up the tw68 driver. It's now using the proper
V4L2 core frameworks.
Tested with my Techwell tw6805a and tw6816 grabber boards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This tw68 driver has been out-of-tree for many years on gitorious:
https://gitorious.org/tw68/tw68-v2.
This copies that code to the kernel as a record of that original code.
Note that William Brack's email address in these sources is no longer
valid and I have not been able to contact him. However, all the code is
standard GPL.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Instead of allocating a var to store 0 and just return it,
change the code to return 0 directly.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Instead of allocating a var to store 0 and just return it,
change the code to return 0 directly.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
lml33dpatch is boolean. So, the possible values are
true or false.
Instead of using if (lml33dpath), just use
if (!lml33dpath).
That allows a faster mental parsing when analyzing the
code.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/ivtv/ivtv-irq.c:195:25: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/ivtv/ivtv-irq.c:199:25: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/ivtv/ivtv-irq.c:278:35: warning: restricted __le32 degrades to integer
drivers/media/pci/ivtv/ivtv-irq.c:281:51: warning: restricted __le32 degrades to integer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/dm1105/dm1105.c:617:9: warning: incorrect type in argument 1 (different base types)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/mantis/hopper_vp3028.c:37:23: warning: symbol 'hopper_vp3028_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1033.c:38:4: warning: symbol 'lgtdqcs001f_inittab' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1033.c:153:23: warning: symbol 'lgtdqcs001f_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1034.c:39:23: warning: symbol 'vp1034_mb86a16_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1041.c:266:23: warning: symbol 'vp1041_stb0899_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1041.c:303:23: warning: symbol 'vp1041_stb6100_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp2033.c:40:24: warning: symbol 'vp2033_tda1002x_cu1216_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp2033.c:45:24: warning: symbol 'vp2033_tda10023_cu1216_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp2040.c:40:24: warning: symbol 'vp2040_tda1002x_cu1216_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp2040.c:45:24: warning: symbol 'vp2040_tda10023_cu1216_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp3030.c:38:23: warning: symbol 'mantis_vp3030_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp3030.c:42:23: warning: symbol 'env57h12d5_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_dma.c:167:33: warning: incorrect type in assignment (different base types)
drivers/media/pci/mantis/mantis_dma.c:172:33: warning: incorrect type in assignment (different base types)
drivers/media/pci/mantis/mantis_dma.c:174:25: warning: incorrect type in assignment (different base types)
drivers/media/pci/mantis/mantis_dma.c:178:9: warning: incorrect type in assignment (different base types)
drivers/media/pci/mantis/mantis_dma.c:179:9: warning: incorrect type in assignment (different base types)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/ngene/ngene-core.c:188:27: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:190:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:199:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:260:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:263:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:282:32: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:283:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:284:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:285:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:286:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:287:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:288:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:292:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:293:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:294:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:295:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:296:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:297:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:303:17: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:316:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:368:17: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:372:9: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1160:28: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1199:20: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1213:30: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1214:30: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1223:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1225:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1227:31: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1296:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1297:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1298:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1299:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1300:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1301:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1302:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1363:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1365:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1376:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1391:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1596:18: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-core.c:1615:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-cards.c:699:29: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-cards.c:699:32: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-cards.c:699:35: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-cards.c:699:38: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-dvb.c:84:59: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-dvb.c:93:20: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/pci/ngene/ngene-dvb.c:94:20: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/pci/ngene/ngene-dvb.c💯20: warning: Using plain integer as NULL pointer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/ddbridge/ddbridge-core.c:88:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:93:37: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:95:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:99:15: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:117:58: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:119:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:123:68: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:130:17: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:131:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:136:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:138:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:152:22: warning: symbol 'ddb_i2c_algo' was not declared. Should it be static?
drivers/media/pci/ddbridge/ddbridge-core.c:183:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:184:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:246:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:247:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:255:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:256:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:269:35: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:358:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:359:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:360:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:362:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:366:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:368:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:369:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:370:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:380:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:381:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:393:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:394:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:395:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:396:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:397:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:401:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:403:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:404:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:406:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:416:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:417:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:475:36: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:484:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:494:20: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:501:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:524:36: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:534:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:852:21: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:973:20: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/pci/ddbridge/ddbridge-core.c:974:20: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/pci/ddbridge/ddbridge-core.c:978:20: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:982:20: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:1003:23: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1006:23: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1009:30: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1015:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1017:39: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1035:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1041:20: warning: symbol 'cxd_cfg' was not declared. Should it be static?
drivers/media/pci/ddbridge/ddbridge-core.c:1130:44: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:1183:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1188:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1193:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1198:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1213:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1214:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1215:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1216:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1231:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1232:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1233:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1289:17: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1333:23: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1295:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1347:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1353:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1354:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1359:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1361:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1373:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1374:16: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1378:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1382:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1385:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1386:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1388:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1393:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1394:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1395:16: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1398:16: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1399:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1451:42: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1462:45: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1467:37: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1538:28: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1550:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1561:31: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:1585:19: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1591:47: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1591:60: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1607:9: warning: too many warnings
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/solo6x10/solo6x10-disp.c:184:24: warning: incorrect type in assignment (different base types)
drivers/media/pci/solo6x10/solo6x10-disp.c:223:32: warning: incorrect type in assignment (different base types)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This was caused by an uninitialized setup.config field.
Based on a suggestion from Devin Heitmueller.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com>
Reported-by: Scott Robinson <scott.robinson55@gmail.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org # for v3.10 and up
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
These addresses are usually out-of-date and the top-level license will
always have the right address. So drop it from these sources.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Use video_drvdata(file) instead of fh->dev to get the cx23885_dev
pointer. This prepares for the vb2 conversion where fh->dev (renamed
to fh->q_dev in this patch) will be removed completely.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The alsa driver uses videobuf low-level functions that are not
available in vb2, so replace them by driver-specific functions.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Move these fields from cx23885_fh to cx23885_dev.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
