Commit Graph

202 Commits

Author SHA1 Message Date
Artem Bityutskiy
6601fac822 Documentation: fix the VM knobs descritpion WRT pdflush
The pdflush thread is long gone, however we still mention it incorrectly in the
kernel documentation. This patch fixes the situation.

Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-04 12:15:09 +04:00
Linus Torvalds
a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
David Rientjes
de34d965a8 mm, oom: replace some information in tasklist dump
The number of ptes and swap entries are used in the oom killer's badness
heuristic, so they should be shown in the tasklist dump.

This patch adds those fields and replaces cpu and oom_adj values that are
currently emitted.  Cpu isn't interesting and oom_adj is deprecated and
will be removed later this year, the same information is already displayed
as oom_score_adj which is used internally.

At the same time, make the documentation a little more clear to state this
information is helpful to determine why the oom killer chose the task it
did to kill.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:42 -07:00
Wanpeng Li
3965c9ae47 mm: prepare for removal of obsolete /proc/sys/vm/nr_pdflush_threads
Since per-BDI flusher threads were introduced in 2.6, the pdflush
mechanism is not used any more.  But the old interface exported through
/proc/sys/vm/nr_pdflush_threads still exists and is obviously useless.

For back-compatibility, printk warning information and return 2 to notify
the users that the interface is removed.

Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:40 -07:00
Christian Ehrhardt
df858fa827 documentation: update how page-cluster affects swap I/O
Fix of the documentation of /proc/sys/vm/page-cluster to match the
behavior of the code and add some comments about what the tunable will
change in that behavior.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:39 -07:00
Kees Cook
9520628e8c fs: make dumpable=2 require fully qualified path
When the suid_dumpable sysctl is set to "2", and there is no core dump
pipe defined in the core_pattern sysctl, a local user can cause core files
to be written to root-writable directories, potentially with
user-controlled content.

This means an admin can unknowningly reintroduce a variation of
CVE-2006-2451, allowing local users to gain root privileges.

  $ cat /proc/sys/fs/suid_dumpable
  2
  $ cat /proc/sys/kernel/core_pattern
  core
  $ ulimit -c unlimited
  $ cd /
  $ ls -l core
  ls: cannot access core: No such file or directory
  $ touch core
  touch: cannot touch `core': Permission denied
  $ OHAI="evil-string-here" ping localhost >/dev/null 2>&1 &
  $ pid=$!
  $ sleep 1
  $ kill -SEGV $pid
  $ ls -l core
  -rw------- 1 root kees 458752 Jun 21 11:35 core
  $ sudo strings core | grep evil
  OHAI=evil-string-here

While cron has been fixed to abort reading a file when there is any
parse error, there are still other sensitive directories that will read
any file present and skip unparsable lines.

Instead of introducing a suid_dumpable=3 mode and breaking all users of
mode 2, this only disables the unsafe portion of mode 2 (writing to disk
via relative path).  Most users of mode 2 (e.g.  Chrome OS) already use
a core dump pipe handler, so this change will not break them.  For the
situations where a pipe handler is not defined but mode 2 is still
active, crash dumps will only be written to fully qualified paths.  If a
relative path is defined (e.g.  the default "core" pattern), dump
attempts will trigger a printk yelling about the lack of a fully
qualified path.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:11 -07:00
Kees Cook
800179c9b8 fs: add link restrictions
This adds symlink and hardlink restrictions to the Linux VFS.

Symlinks:

A long-standing class of security issues is the symlink-based
time-of-check-time-of-use race, most commonly seen in world-writable
directories like /tmp. The common method of exploitation of this flaw
is to cross privilege boundaries when following a given symlink (i.e. a
root process follows a symlink belonging to another user). For a likely
incomplete list of hundreds of examples across the years, please see:
http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp

The solution is to permit symlinks to only be followed when outside
a sticky world-writable directory, or when the uid of the symlink and
follower match, or when the directory owner matches the symlink's owner.

Some pointers to the history of earlier discussion that I could find:

 1996 Aug, Zygo Blaxell
  http://marc.info/?l=bugtraq&m=87602167419830&w=2
 1996 Oct, Andrew Tridgell
  http://lkml.indiana.edu/hypermail/linux/kernel/9610.2/0086.html
 1997 Dec, Albert D Cahalan
  http://lkml.org/lkml/1997/12/16/4
 2005 Feb, Lorenzo Hernández García-Hierro
  http://lkml.indiana.edu/hypermail/linux/kernel/0502.0/1896.html
 2010 May, Kees Cook
  https://lkml.org/lkml/2010/5/30/144

Past objections and rebuttals could be summarized as:

 - Violates POSIX.
   - POSIX didn't consider this situation and it's not useful to follow
     a broken specification at the cost of security.
 - Might break unknown applications that use this feature.
   - Applications that break because of the change are easy to spot and
     fix. Applications that are vulnerable to symlink ToCToU by not having
     the change aren't. Additionally, no applications have yet been found
     that rely on this behavior.
 - Applications should just use mkstemp() or O_CREATE|O_EXCL.
   - True, but applications are not perfect, and new software is written
     all the time that makes these mistakes; blocking this flaw at the
     kernel is a single solution to the entire class of vulnerability.
 - This should live in the core VFS.
   - This should live in an LSM. (https://lkml.org/lkml/2010/5/31/135)
 - This should live in an LSM.
   - This should live in the core VFS. (https://lkml.org/lkml/2010/8/2/188)

Hardlinks:

On systems that have user-writable directories on the same partition
as system files, a long-standing class of security issues is the
hardlink-based time-of-check-time-of-use race, most commonly seen in
world-writable directories like /tmp. The common method of exploitation
of this flaw is to cross privilege boundaries when following a given
hardlink (i.e. a root process follows a hardlink created by another
user). Additionally, an issue exists where users can "pin" a potentially
vulnerable setuid/setgid file so that an administrator will not actually
upgrade a system fully.

The solution is to permit hardlinks to only be created when the user is
already the existing file's owner, or if they already have read/write
access to the existing file.

Many Linux users are surprised when they learn they can link to files
they have no access to, so this change appears to follow the doctrine
of "least surprise". Additionally, this change does not violate POSIX,
which states "the implementation may require that the calling process
has permission to access the existing file"[1].

This change is known to break some implementations of the "at" daemon,
though the version used by Fedora and Ubuntu has been fixed[2] for
a while. Otherwise, the change has been undisruptive while in use in
Ubuntu for the last 1.5 years.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/linkat.html
[2] http://anonscm.debian.org/gitweb/?p=collab-maint/at.git;a=commitdiff;h=f4114656c3a6c6f6070e315ffdf940a49eda3279

This patch is based on the patches in Openwall and grsecurity, along with
suggestions from Al Viro. I have added a sysctl to enable the protected
behavior, and documentation.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29 21:37:58 +04:00
KOSAKI Motohiro
cef0184c11 mqueue: separate mqueue default value from maximum value
Commit b231cca438 ("message queues: increase range limits") changed
mqueue default value when attr parameter is specified NULL from hard
coded value to fs.mqueue.{msg,msgsize}_max sysctl value.

This made large side effect.  When user need to use two mqueue
applications 1) using !NULL attr parameter and it require big message
size and 2) using NULL attr parameter and only need small size message,
app (1) require to raise fs.mqueue.msgsize_max and app (2) consume large
memory size even though it doesn't need.

Doug Ledford propsed to switch back it to static hard coded value.
However it also has a compatibility problem.  Some applications might
started depend on the default value is tunable.

The solution is to separate default value from maximum value.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Acked-by: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:31 -07:00
Shan Wei
c60f6aa8ac net: doc: merge /proc/sys/net/core/* documents into one place
All parameter descriptions in /proc/sys/net/core/* now is separated
two places. So, merge them into Documentation/sysctl/net.txt.

Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-27 00:09:26 -04:00
Larry Finger
f5fe184b08 Documentation: add missing tainted bits to Documentation/sysctl/kernel.txt
Two of the bits in the tainted flag are not documented.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-06 16:29:19 -08:00
Pavel Emelyanov
b8f566b04d sysctl: add the kernel.ns_last_pid control
The sysctl works on the current task's pid namespace, getting and setting
its last_pid field.

Writing is allowed for CAP_SYS_ADMIN-capable tasks thus making it possible
to create a task with desired pid value.  This ability is required badly
for the checkpoint/restore in userspace.

This approach suits all the parties for now.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:11 -08:00
Mitsuo Hayasaka
55af77969f x86: Panic on detection of stack overflow
Currently, messages are just output on the detection of stack
overflow, which is not sufficient for systems that need a
high reliability. This is because in general the overflow may
corrupt data, and the additional corruption may occur due to
reading them unless systems stop.

This patch adds the sysctl parameter
kernel.panic_on_stackoverflow and causes a panic when detecting
the overflows of kernel, IRQ and exception stacks except user
stack according to the parameter. It is disabled by default.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/20111129060836.11076.12323.stgit@ltc219.sdl.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05 11:37:47 +01:00
Dan Ballard
73efc0394e kernel/sysctl.c: add cap_last_cap to /proc/sys/kernel
Userspace needs to know the highest valid capability of the running
kernel, which right now cannot reliably be retrieved from the header files
only.  The fact that this value cannot be determined properly right now
creates various problems for libraries compiled on newer header files
which are run on older kernels.  They assume capabilities are available
which actually aren't.  libcap-ng is one example.  And we ran into the
same problem with systemd too.

Now the capability is exported in /proc/sys/kernel/cap_last_cap.

[akpm@linux-foundation.org: make cap_last_cap const, per Ulrich]
Signed-off-by: Dan Ballard <dan@mindstab.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Ulrich Drepper <drepper@akkadia.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:53 -07:00
Vasiliy Kulikov
b34a6b1da3 ipc: introduce shm_rmid_forced sysctl
Add support for the shm_rmid_forced sysctl.  If set to 1, all shared
memory objects in current ipc namespace will be automatically forced to
use IPC_RMID.

The POSIX way of handling shmem allows one to create shm objects and
call shmdt(), leaving shm object associated with no process, thus
consuming memory not counted via rlimits.

With shm_rmid_forced=1 the shared memory object is counted at least for
one process, so OOM killer may effectively kill the fat process holding
the shared memory.

It obviously breaks POSIX - some programs relying on the feature would
stop working.  So set shm_rmid_forced=1 only if you're sure nobody uses
"orphaned" memory.  Use shm_rmid_forced=0 by default for compatability
reasons.

The feature was previously impemented in -ow as a configure option.

[akpm@linux-foundation.org: fix documentation, per Randy]
[akpm@linux-foundation.org: fix warning]
[akpm@linux-foundation.org: readability/conventionality tweaks]
[akpm@linux-foundation.org: fix shm_rmid_forced/shm_forced_rmid confusion, use standard comment layout]
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Serge E. Hallyn" <serge.hallyn@canonical.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Solar Designer <solar@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:44 -07:00
Borislav Petkov
807094c0b1 Documentation: refresh sysctl/kernel.txt
Refresh sysctl/kernel.txt.  More specifically,

 - drop stale index entries
 - sync and sort index and entries
 - reflow sticking out paragraphs to colwidth 72
 - correct typos
 - cleanup whitespace

Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-23 10:58:08 -07:00
Jiri Slaby
57cc083ad9 coredump: add support for exe_file in core name
Now, exe_file is not proc FS dependent, so we can use it to name core
file.  So we add %E pattern for core file name cration which extract path
from mm_struct->exe_file.  Then it converts slashes to exclamation marks
and pastes the result to the core file name itself.

This is useful for environments where binary names are longer than 16
character (the current->comm limitation).  Also where there are binaries
with same name but in a different path.  Further in case the binery itself
changes its current->comm after exec.

So by doing (s/$/#/ -- # is treated as git comment):

  $ sysctl kernel.core_pattern='core.%p.%e.%E'
  $ ln /bin/cat cat45678901234567890
  $ ./cat45678901234567890
  ^Z
  $ rm cat45678901234567890
  $ fg
  ^\Quit (core dumped)
  $ ls core*

we now get:

  core.2434.cat456789012345.!root!cat45678901234567890 (deleted)

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:36 -07:00
Lucian Adrian Grijincu
52307a9e1d Documentation: update epoll sysctl text
max_user_instances was removed in this commit:

   commit 9df04e1f25
   Author: Davide Libenzi <davidel@xmailserver.org>
   Date:   Thu Jan 29 14:25:26 2009 -0800

    epoll: drop max_user_instances and rely only on max_user_watches

but the documentation entry was not removed.

Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23 15:14:11 -07:00
Linus Torvalds
57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Eric Dumazet
0a14842f5a net: filter: Just In Time compiler for x86-64
In order to speedup packet filtering, here is an implementation of a
JIT compiler for x86_64

It is disabled by default, and must be enabled by the admin.

echo 1 >/proc/sys/net/core/bpf_jit_enable

It uses module_alloc() and module_free() to get memory in the 2GB text
kernel range since we call helpers functions from the generated code.

EAX : BPF A accumulator
EBX : BPF X accumulator
RDI : pointer to skb   (first argument given to JIT function)
RBP : frame pointer (even if CONFIG_FRAME_POINTER=n)
r9d : skb->len - skb->data_len (headlen)
r8  : skb->data

To get a trace of generated code, use :

echo 2 >/proc/sys/net/core/bpf_jit_enable

Example of generated code :

# tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24

flen=18 proglen=147 pass=3 image=ffffffffa00b5000
JIT code: ffffffffa00b5000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 60
JIT code: ffffffffa00b5010: 44 2b 4f 64 4c 8b 87 b8 00 00 00 be 0c 00 00 00
JIT code: ffffffffa00b5020: e8 24 7b f7 e0 3d 00 08 00 00 75 28 be 1a 00 00
JIT code: ffffffffa00b5030: 00 e8 fe 7a f7 e0 24 00 3d 00 14 a8 c0 74 49 be
JIT code: ffffffffa00b5040: 1e 00 00 00 e8 eb 7a f7 e0 24 00 3d 00 14 a8 c0
JIT code: ffffffffa00b5050: 74 36 eb 3b 3d 06 08 00 00 74 07 3d 35 80 00 00
JIT code: ffffffffa00b5060: 75 2d be 1c 00 00 00 e8 c8 7a f7 e0 24 00 3d 00
JIT code: ffffffffa00b5070: 14 a8 c0 74 13 be 26 00 00 00 e8 b5 7a f7 e0 24
JIT code: ffffffffa00b5080: 00 3d 00 14 a8 c0 75 07 b8 ff ff 00 00 eb 02 31
JIT code: ffffffffa00b5090: c0 c9 c3

BPF program is 144 bytes long, so native program is almost same size ;)

(000) ldh      [12]
(001) jeq      #0x800           jt 2    jf 8
(002) ld       [26]
(003) and      #0xffffff00
(004) jeq      #0xc0a81400      jt 16   jf 5
(005) ld       [30]
(006) and      #0xffffff00
(007) jeq      #0xc0a81400      jt 16   jf 17
(008) jeq      #0x806           jt 10   jf 9
(009) jeq      #0x8035          jt 10   jf 17
(010) ld       [28]
(011) and      #0xffffff00
(012) jeq      #0xc0a81400      jt 16   jf 13
(013) ld       [38]
(014) and      #0xffffff00
(015) jeq      #0xc0a81400      jt 16   jf 17
(016) ret      
(017) ret      

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27 23:05:08 -07:00
Paul Bolle
5a3016a615 doc: fix 3 typos in sysctl/vm.txt
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06 07:09:35 -07:00
Linus Torvalds
e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Federica Teodori
ca3b78aa16 Documentation: file handles are now freed
Since file handles are freed, a little amendment to the documentation

Signed-off-by: Federica Teodori <federica.teodori@googlemail.com>
Acked-by: Rik van Riel<riel@redhat.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-16 10:47:03 -07:00
Paul Bolle
87889e158f Documentation: default_message_level is a typo
It's default_message_loglevel, not default_message_level.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11 15:14:10 +01:00
Jovi Zhang
e020e742e5 sysctl: remove obsolete comments
ctl_unnumbered.txt have been removed in Documentation directory so just
also remove this invalid comments

[akpm@linux-foundation.org: fix Documentation/sysctl/00-INDEX, per Dave]
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:18 -08:00
Dan Rosenberg
455cd5ab30 kptr_restrict for hiding kernel pointers from unprivileged users
Add the %pK printk format specifier and the /proc/sys/kernel/kptr_restrict
sysctl.

The %pK format specifier is designed to hide exposed kernel pointers,
specifically via /proc interfaces.  Exposing these pointers provides an
easy target for kernel write vulnerabilities, since they reveal the
locations of writable structures containing easily triggerable function
pointers.  The behavior of %pK depends on the kptr_restrict sysctl.

If kptr_restrict is set to 0, no deviation from the standard %p behavior
occurs.  If kptr_restrict is set to 1, the default, if the current user
(intended to be a reader via seq_printf(), etc.) does not have CAP_SYSLOG
(currently in the LSM tree), kernel pointers using %pK are printed as 0's.
 If kptr_restrict is set to 2, kernel pointers using %pK are printed as
0's regardless of privileges.  Replacing with 0's was chosen over the
default "(null)", which cannot be parsed by userland %p, which expects
"(nil)".

[akpm@linux-foundation.org: check for IRQ context when !kptr_restrict, save an indent level, s/WARN/WARN_ONCE/]
[akpm@linux-foundation.org: coding-style fixup]
[randy.dunlap@oracle.com: fix kernel/sysctl.c warning]
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Thomas Graf <tgraf@infradead.org>
Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric Paris <eparis@parisplace.org>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:08 -08:00
Serge E. Hallyn
38ef4c2e43 syslog: check cap_syslog when dmesg_restrict
Eric Paris pointed out that it doesn't make sense to require
both CAP_SYS_ADMIN and CAP_SYSLOG for certain syslog actions.
So require CAP_SYSLOG, not CAP_SYS_ADMIN, when dmesg_restrict
is set.

(I'm also consolidating the now common error path)

Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-12-09 09:48:48 +11:00
Dan Rosenberg
eaf06b241b Restrict unprivileged access to kernel syslog
The kernel syslog contains debugging information that is often useful
during exploitation of other vulnerabilities, such as kernel heap
addresses.  Rather than futilely attempt to sanitize hundreds (or
thousands) of printk statements and simultaneously cripple useful
debugging functionality, it is far simpler to create an option that
prevents unprivileged users from reading the syslog.

This patch, loosely based on grsecurity's GRKERNSEC_DMESG, creates the
dmesg_restrict sysctl.  When set to "0", the default, no restrictions are
enforced.  When set to "1", only users with CAP_SYS_ADMIN can read the
kernel syslog via dmesg(8) or other mechanisms.

[akpm@linux-foundation.org: explain the config option in kernel.txt]
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Eugene Teo <eugeneteo@kernel.org>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Andrea Righi
abffc0207f doc: clarify the behaviour of dirty_ratio/dirty_bytes
When dirty_ratio or dirty_bytes is written the other parameter is disabled
and set to 0 (in dirty_bytes_handler() / dirty_ratio_handler()).

We do the same for dirty_background_ratio and dirty_background_bytes.

However, in the sysctl documentation, we say that the counterpart becomes
a function of the old value, that is not correct.

Clarify the documentation reporting the actual behaviour.

Reviewed-by: Greg Thelen <gthelen@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrea Righi <arighi@develer.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:08 -07:00
David Rientjes
ad915c432e oom: enable oom tasklist dump by default
The oom killer tasklist dump, enabled with the oom_dump_tasks sysctl, is
very helpful information in diagnosing why a user's task has been killed.
It emits useful information such as each eligible thread's memory usage
that can determine why the system is oom, so it should be enabled by
default.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:56 -07:00
Kulikov Vasiliy
2174efb6a2 Documentation/sysctl/vm.txt typo
Fix trivial typo: duplicated word.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-28 13:59:28 +02:00
Mel Gorman
5e77190580 mm: compaction: add a tunable that decides when memory should be compacted and when it should be reclaimed
The kernel applies some heuristics when deciding if memory should be
compacted or reclaimed to satisfy a high-order allocation.  One of these
is based on the fragmentation.  If the index is below 500, memory will not
be compacted.  This choice is arbitrary and not based on data.  To help
optimise the system and set a sensible default for this value, this patch
adds a sysctl extfrag_threshold.  The kernel will only compact memory if
the fragmentation index is above the extfrag_threshold.

[randy.dunlap@oracle.com: Fix build errors when proc fs is not configured]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:59 -07:00
Mel Gorman
76ab0f530e mm: compaction: add /proc trigger for memory compaction
Add a proc file /proc/sys/vm/compact_memory.  When an arbitrary value is
written to the file, all zones are compacted.  The expected user of such a
trigger is a job scheduler that prepares the system before the target
application runs.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:59 -07:00
Eric Dumazet
3b098e2d7c net: Consistent skb timestamping
With RPS inclusion, skb timestamping is not consistent in RX path.

If netif_receive_skb() is used, its deferred after RPS dispatch.

If netif_rx() is used, its done before RPS dispatch.

This can give strange tcpdump timestamps results.

I think timestamping should be done as soon as possible in the receive
path, to get meaningful values (ie timestamps taken at the time packet
was delivered by NIC driver to our stack), even if NAPI already can
defer timestamping a bit (RPS can help to reduce the gap)

Tom Herbert prefer to sample timestamps after RPS dispatch. In case
sampling is expensive (HPET/acpi_pm on x86), this makes sense.

Let admins switch from one mode to another, using a new
sysctl, /proc/sys/net/core/netdev_tstamp_prequeue

Its default value (1), means timestamps are taken as soon as possible,
before backlog queueing, giving accurate timestamps.

Setting a 0 value permits to sample timestamps when processing backlog,
after RPS dispatch, to lower the load of the pre-RPS cpu.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 23:57:10 -07:00
KAMEZAWA Hiroyuki
daaf1e6887 memcg: handle panic_on_oom=always case
Presently, if panic_on_oom=2, the whole system panics even if the oom
happend in some special situation (as cpuset, mempolicy....).  Then,
panic_on_oom=2 means painc_on_oom_always.

Now, memcg doesn't check panic_on_oom flag. This patch adds a check.

BTW, how it's useful ?

kdump+panic_on_oom=2 is the last tool to investigate what happens in
oom-ed system.  When a task is killed, the sysytem recovers and there will
be few hint to know what happnes.  In mission critical system, oom should
never happen.  Then, panic_on_oom=2+kdump is useful to avoid next OOM by
knowing precise information via snapshot.

TODO:
 - For memcg, it's for isolate system's memory usage, oom-notiifer and
   freeze_at_oom (or rest_at_oom) should be implemented. Then, management
   daemon can do similar jobs (as kdump) or taking snapshot per cgroup.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:37 -08:00
H. Peter Anvin
d75757abd0 doc: Add documentation for bootloader_{type,version}
Add documentation for kernel/bootloader_type and
kernel/bootloader_version to sysctl/kernel.txt.  This should really
have been done a long time ago.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Shen Feng <shen@cn.fujitsu.com>
2009-12-11 14:28:56 -08:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Eric W. Biederman
86926d0096 sysctl: Remove CTL_NONE and CTL_UNNUMBERED
Now that the sysctl structures no longer have a ctl_name field
there is no reason to retain the definitions for CTL_NONE and
CTL_UNNUMBERED, or to explain their historic usage.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-18 08:14:55 -08:00
Randy Dunlap
7beeec88e5 docs: fix core_pipe_limit info
Fix typos in core_pipe_limit info.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-09 09:40:55 +01:00
Linus Torvalds
db16826367 Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
  HWPOISON: Enable error_remove_page on btrfs
  HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
  HWPOISON: Add madvise() based injector for hardware poisoned pages v4
  HWPOISON: Enable error_remove_page for NFS
  HWPOISON: Enable .remove_error_page for migration aware file systems
  HWPOISON: The high level memory error handler in the VM v7
  HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
  HWPOISON: shmem: call set_page_dirty() with locked page
  HWPOISON: Define a new error_remove_page address space op for async truncation
  HWPOISON: Add invalidate_inode_page
  HWPOISON: Refactor truncate to allow direct truncating of page v2
  HWPOISON: check and isolate corrupted free pages v2
  HWPOISON: Handle hardware poisoned pages in try_to_unmap
  HWPOISON: Use bitmask/action code for try_to_unmap behaviour
  HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
  HWPOISON: Add poison check to page fault handling
  HWPOISON: Add basic support for poisoned pages in fault handler v3
  HWPOISON: Add new SIGBUS error codes for hardware poison signals
  HWPOISON: Add support for poison swap entries v2
  HWPOISON: Export some rmap vma locking to outside world
  ...
2009-09-24 07:53:22 -07:00
Neil Horman
a293980c2e exec: let do_coredump() limit the number of concurrent dumps to pipes
Introduce core pipe limiting sysctl.

Since we can dump cores to pipe, rather than directly to the filesystem,
we create a condition in which a user can create a very high load on the
system simply by running bad applications.

If the pipe reader specified in core_pattern is poorly written, we can
have lots of ourstandig resources and processes in the system.

This sysctl introduces an ability to limit that resource consumption.
core_pipe_limit defines how many in-flight dumps may be run in parallel,
dumps beyond this value are skipped and a note is made in the kernel log.
A special value of 0 in core_pipe_limit denotes unlimited core dumps may
be handled (this is the default value).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Earl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:00 -07:00
Xiaotian Feng
bcadbbd4c8 Documentation: update stale definition of file-nr in fs.txt
In "documentation: update Documentation/filesystem/proc.txt and
Documentation/sysctls" (commit 760df93ec) we merged /proc/sys/fs
documentation in Documentation/sysctl/fs.txt and
Documentation/filesystem/proc.txt, but stale file-nr definition
remained.

This patch adds back the right fs-nr definition for 2.6 kernel.

Signed-off-by: Xiaotian Feng<dfeng@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:57 -07:00
Dave Young
af91322ef3 printk: add printk_delay to make messages readable for some scenarios
When syslog is not possible, at the same time there's no serial/net
console available, it will be hard to read the printk messages.  For
example oops/panic/warning messages in shutdown phase.

Add a printk delay feature, we can make each printk message delay some
milliseconds.

Setting the delay by proc/sysctl interface: /proc/sys/kernel/printk_delay

The value range from 0 - 10000, default value is 0

[akpm@linux-foundation.org: fix a few things]
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:28 -07:00
Linus Torvalds
342ff1a1b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...
2009-09-22 07:51:45 -07:00
Jan Kara
55c37a840d vm: document that setting vfs_cache_pressure to 0 isn't a good idea
Reported-by: Christian Thaeter <ct@pipapo.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:30 -07:00
Horst Schirmeier
b7f5ab6fbb trivial: doc: document missing value 2 for randomize-va-space
The documentation for /proc/sys/kernel/* does not mention the possible
value 2 for randomize-va-space yet.  While being there, doing some
reformatting, fixing grammar problems and clarifying the correlations
between randomize-va-space, kernel parameter "norandmaps" and the
CONFIG_COMPAT_BRK option.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:53 +02:00
Andi Kleen
6a46079cf5 HWPOISON: The high level memory error handler in the VM v7
Add the high level memory handler that poisons pages
that got corrupted by hardware (typically by a two bit flip in a DIMM
or a cache) on the Linux level. The goal is to prevent everyone
from accessing these pages in the future.

This done at the VM level by marking a page hwpoisoned
and doing the appropriate action based on the type of page
it is.

The code that does this is portable and lives in mm/memory-failure.c

To quote the overview comment:

High level machine check handler. Handles pages reported by the
hardware as being corrupted usually due to a 2bit ECC memory or cache
failure.

This focuses on pages detected as corrupted in the background.
When the current CPU tries to consume corruption the currently
running process can just be killed directly instead. This implies
that if the error cannot be handled for some reason it's safe to
just ignore it because no corruption has been consumed yet. Instead
when that happens another machine check will happen.

Handles page cache pages in various states. The tricky part
here is that we can access any page asynchronous to other VM
users, because memory failures could happen anytime and anywhere,
possibly violating some of their assumptions. This is why this code
has to be extremely careful. Generally it tries to use normal locking
rules, as in get the standard locks, even if that means the
error handling takes potentially a long time.

Some of the operations here are somewhat inefficient and have non
linear algorithmic complexity, because the data structures have not
been optimized for this case. This is in particular the case
for the mapping from a vma to a process. Since this case is expected
to be rare we hope we can get away with this.

There are in principle two strategies to kill processes on poison:
- just unmap the data and wait for an actual reference before
killing
- kill as soon as corruption is detected.
Both have advantages and disadvantages and should be used
in different situations. Right now both are implemented and can
be switched with a new sysctl vm.memory_failure_early_kill
The default is early kill.

The patch does some rmap data structure walking on its own to collect
processes to kill. This is unusual because normally all rmap data structure
knowledge is in rmap.c only. I put it here for now to keep
everything together and rmap knowledge has been seeping out anyways

Includes contributions from Johannes Weiner, Chris Mason, Fengguang Wu,
Nick Piggin (who did a lot of great work) and others.

Cc: npiggin@suse.de
Cc: riel@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
2009-09-16 11:50:15 +02:00
Hans-Joachim Picht
c114728af2 [S390] add call home support
Signed-off-by: Hans-Joachim Picht <hans@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11 10:29:49 +02:00
Mel Gorman
90afa5de6f vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim
A bug was brought to my attention against a distro kernel but it affects
mainline and I believe problems like this have been reported in various
guises on the mailing lists although I don't have specific examples at the
moment.

The reported problem was that malloc() stalled for a long time (minutes in
some cases) if a large tmpfs mount was occupying a large percentage of
memory overall.  The pages did not get cleaned or reclaimed by
zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists
are uselessly scanned frequencly making the CPU spin at near 100%.

This patchset intends to address that bug and bring the behaviour of
zone_reclaim() more in line with expectations which were noticed during
investigation.  It is based on top of mmotm and takes advantage of
Kosaki's work with respect to zone_reclaim().

Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the
	scan should go ahead. The broken heuristic is what was causing the
	malloc() stall as it uselessly scanned the LRU constantly. Currently,
	zone_reclaim is assuming zone_reclaim_mode is 1 and historically it
	could not deal with tmpfs pages at all. This fixes up the heuristic so
	that an unnecessary scan is more likely to be correctly avoided.

Patch 2 notes that zone_reclaim() returning a failure automatically means
	the zone is marked full. This is not always true. It could have
	failed because the GFP mask or zone_reclaim_mode were unsuitable.

Patch 3 introduces a counter zreclaim_failed that will increment each
	time the zone_reclaim scan-avoidance heuristics fail. If that
	counter is rapidly increasing, then zone_reclaim_mode should be
	set to 0 as a temporarily resolution and a bug reported because
	the scan-avoidance heuristic is still broken.

This patch:

On NUMA machines, the administrator can configure zone_reclaim_mode that
is a more targetted form of direct reclaim.  On machines with large NUMA
distances for example, a zone_reclaim_mode defaults to 1 meaning that
clean unmapped pages will be reclaimed if the zone watermarks are not
being met.

There is a heuristic that determines if the scan is worthwhile but the
problem is that the heuristic is not being properly applied and is
basically assuming zone_reclaim_mode is 1 if it is enabled.  The lack of
proper detection can manfiest as high CPU usage as the LRU list is scanned
uselessly.

Historically, once enabled it was depending on NR_FILE_PAGES which may
include swapcache pages that the reclaim_mode cannot deal with.  Patch
vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by
Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included
pages that were not file-backed such as swapcache and made a calculation
based on the inactive, active and mapped files.  This is far superior when
zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a
reasonable starting figure.

This patch alters how zone_reclaim() works out how many pages it might be
able to reclaim given the current reclaim_mode.  If RECLAIM_SWAP is set in
the reclaim_mode it will either consider NR_FILE_PAGES as potential
candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount
swapcache and other non-file-backed pages.  If RECLAIM_WRITE is not set,
then NR_FILE_DIRTY number of pages are not candidates.  If RECLAIM_SWAP is
not set, then NR_FILE_MAPPED are not.

[kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages]
[fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:45 -07:00
Mel Gorman
418589663d page allocator: use allocation flags as an index to the zone watermark
ALLOC_WMARK_MIN, ALLOC_WMARK_LOW and ALLOC_WMARK_HIGH determin whether
pages_min, pages_low or pages_high is used as the zone watermark when
allocating the pages.  Two branches in the allocator hotpath determine
which watermark to use.

This patch uses the flags as an array index into a watermark array that is
indexed with WMARK_* defines accessed via helpers.  All call sites that
use zone->pages_* are updated to use the helpers for accessing the values
and the array offsets for setting.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:35 -07:00
Matt LaPlante
19f5946001 trivial: Miscellaneous documentation typo fixes
Fix various typos in documentation txts.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:47 +02:00
James Morris
2c9e703c61 Merge branch 'master' into next
Conflicts:
	fs/exec.c

Removed IMA changes (the IMA checks are now performed via may_open()).

Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 18:40:59 +10:00
Jens Axboe
cd17cbfda0 Revert "mm: add /proc controls for pdflush threads"
This reverts commit fafd688e4c.

Work is progressing to switch away from pdflush as the process backing
for flushing out dirty data. So it seems pointless to add more knobs
to control pdflush threads. The original author of the patch did not
have any specific use cases for adding the knobs, so we can easily
revert this before 2.6.30 to avoid having to maintain this API
forever.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-15 11:32:24 +02:00
James Morris
d254117099 Merge branch 'master' into next 2009-05-08 17:56:47 +10:00
Andrea Righi
9e4a5bda89 mm: prevent divide error for small values of vm_dirty_bytes
Avoid setting less than two pages for vm_dirty_bytes: this is necessary to
avoid potential division by 0 (like the following) in get_dirty_limits().

[   49.951610] divide error: 0000 [] PREEMPT SMP
[   49.952195] last sysfs file: /sys/devices/pci0000:00/0000:00:01.1/host0/target0:0:0/0:0:0:0/block/sda/uevent
[   49.952195] CPU 1
[   49.952195] Modules linked in: pcspkr
[   49.952195] Pid: 3064, comm: dd Not tainted 2.6.30-rc3 
[   49.952195] RIP: 0010:[<ffffffff802d39a9>]  [<ffffffff802d39a9>] get_dirty_limits+0xe9/0x2c0
[   49.952195] RSP: 0018:ffff88001de03a98  EFLAGS: 00010202
[   49.952195] RAX: 00000000000000c0 RBX: ffff88001de03b80 RCX: 28f5c28f5c28f5c3
[   49.952195] RDX: 0000000000000000 RSI: 00000000000000c0 RDI: 0000000000000000
[   49.952195] RBP: ffff88001de03ae8 R08: 0000000000000000 R09: 0000000000000000
[   49.952195] R10: ffff88001ddda9a0 R11: 0000000000000001 R12: 0000000000000001
[   49.952195] R13: ffff88001fbc8218 R14: ffff88001de03b70 R15: ffff88001de03b78
[   49.952195] FS:  00007fe9a435b6f0(0000) GS:ffff8800025d9000(0000) knlGS:0000000000000000
[   49.952195] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   49.952195] CR2: 00007fe9a39ab000 CR3: 000000001de38000 CR4: 00000000000006e0
[   49.952195] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   49.952195] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   49.952195] Process dd (pid: 3064, threadinfo ffff88001de02000, task ffff88001ddda250)
[   49.952195] Stack:
[   49.952195]  ffff88001fa0de00 ffff88001f2dbd70 ffff88001f9fe800 000080b900000000
[   49.952195]  00000000000000c0 ffff8800027a6100 0000000000000400 ffff88001fbc8218
[   49.952195]  0000000000000000 0000000000000600 ffff88001de03bb8 ffffffff802d3ed7
[   49.952195] Call Trace:
[   49.952195]  [<ffffffff802d3ed7>] balance_dirty_pages_ratelimited_nr+0x1d7/0x3f0
[   49.952195]  [<ffffffff80368f8e>] ? ext3_writeback_write_end+0x9e/0x120
[   49.952195]  [<ffffffff802cc7df>] generic_file_buffered_write+0x12f/0x330
[   49.952195]  [<ffffffff802cce8d>] __generic_file_aio_write_nolock+0x26d/0x460
[   49.952195]  [<ffffffff802cda32>] ? generic_file_aio_write+0x52/0xd0
[   49.952195]  [<ffffffff802cda49>] generic_file_aio_write+0x69/0xd0
[   49.952195]  [<ffffffff80365fa6>] ext3_file_write+0x26/0xc0
[   49.952195]  [<ffffffff803034d1>] do_sync_write+0xf1/0x140
[   49.952195]  [<ffffffff80290d1a>] ? get_lock_stats+0x2a/0x60
[   49.952195]  [<ffffffff80280730>] ? autoremove_wake_function+0x0/0x40
[   49.952195]  [<ffffffff8030411b>] vfs_write+0xcb/0x190
[   49.952195]  [<ffffffff803042d0>] sys_write+0x50/0x90
[   49.952195]  [<ffffffff8022ff6b>] system_call_fastpath+0x16/0x1b
[   49.952195] Code: 00 00 00 2b 05 09 1c 17 01 48 89 c6 49 0f af f4 48 c1 ee 02 48 89 f0 48 f7 e1 48 89 d6 31 d2 48 c1 ee 02 48 0f af 75 d0 48 89 f0 <48> f7 f7 41 8b 95 ac 01 00 00 48 89 c7 49 0f af d4 48 c1 ea 02
[   49.952195] RIP  [<ffffffff802d39a9>] get_dirty_limits+0xe9/0x2c0
[   49.952195]  RSP <ffff88001de03a98>
[   50.096523] ---[ end trace 008d7aa02f244d7b ]---

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 15:36:10 -07:00
Li Zefan
ca8b995029 Documentation/sysctl/net.txt: fix a typo
s/spicified/specified

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:28 -07:00
Peter W Morreale
fafd688e4c mm: add /proc controls for pdflush threads
Add /proc entries to give the admin the ability to control the minimum and
maximum number of pdflush threads.  This allows finer control of pdflush
on both large and small machines.

The rationale is simply one size does not fit all.  Admins on large and/or
small systems may want to tune the min/max pdflush thread count to best
suit their needs.  Right now the min/max is hardcoded to 2/8.  While
probably a fair estimate for smaller machines, large machines with large
numbers of CPUs and large numbers of filesystems/block devices may benefit
from larger numbers of threads working on different block devices.

Even if the background flushing algorithm is radically changed, it is
still likely that multiple threads will be involved and admins would still
desire finer control on the min/max other than to have to recompile the
kernel.

The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
'/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.

The minimum value for nr_pdflush_threads_min is 1 and the maximum value is
the current value of nr_pdflush_threads_max.  This minimum is required
since additional thread creation is performed in a pdflush thread itself.

The minimum value for nr_pdflush_threads_max is the current value of
nr_pdflush_threads_min and the maximum value can be 1000.

Documentation/sysctl/vm.txt is also updated.

[akpm@linux-foundation.org: fix comment, fix whitespace, use __read_mostly]
Signed-off-by: Peter W Morreale <pmorreale@novell.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:03 -07:00
Li Xiaodong
45dad7bd9d documentation: fix unix_dgram_qlen description
Previous description about system parameter in /proc/sys/net/unix/ is
wrong (or missed).  Simply add a new description about unix_dgram_qlen
according to latest kernel.

Signed-off-by: Li Xiaodong <lixd@cn.fujitsu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:53 -07:00
Shen Feng
760df93ecd documentation: update Documentation/filesystem/proc.txt and Documentation/sysctls
Now /proc/sys is described in many places and much information is
redundant.  This patch updates the proc.txt and move the /proc/sys
desciption out to the files in Documentation/sysctls.

Details are:

merge
-  2.1  /proc/sys/fs - File system data
-  2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem
-  2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
with Documentation/sysctls/fs.txt.

remove
-  2.2  /proc/sys/fs/binfmt_misc - Miscellaneous binary formats
since it's not better then the Documentation/binfmt_misc.txt.

merge
-  2.3  /proc/sys/kernel - general kernel parameters
with Documentation/sysctls/kernel.txt

remove
-  2.5  /proc/sys/dev - Device specific parameters
since it's obsolete the sysfs is used now.

remove
-  2.6  /proc/sys/sunrpc - Remote procedure calls
since it's not better then the Documentation/sysctls/sunrpc.txt

move
-  2.7  /proc/sys/net - Networking stuff
-  2.9  Appletalk
-  2.10 IPX
to newly created Documentation/sysctls/net.txt.

remove
-  2.8  /proc/sys/net/ipv4 - IPV4 settings
since it's not better then the Documentation/networking/ip-sysctl.txt.

add
- Chapter 3 Per-Process Parameters
to descibe /proc/<pid>/xxx parameters.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:53 -07:00
Kees Cook
3d43321b70 modules: sysctl to block module loading
Implement a sysctl file that disables module-loading system-wide since
there is no longer a viable way to remove CAP_SYS_MODULE after the system
bounding capability set was removed in 2.6.25.

Value can only be set to "1", and is tested only if standard capability
checks allow CAP_SYS_MODULE.  Given existing /dev/mem protections, this
should allow administrators a one-way method to block module loading
after initial boot-time module loading has finished.

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-04-03 11:47:11 +11:00
Peter W Morreale
db0fb1848a Update of Documentation: vm.txt and proc.txt
Update Documentation/sysctl/vm.txt and Documentation/filesystems/proc.txt.
 More specifically, the section on /proc/sys/vm in
Documentation/filesystems/proc.txt was removed and a link to
Documentation/sysctl/vm.txt added.

Most of the verbiage from proc.txt was simply moved in vm.txt, with new
addtional text for "swappiness" and "stat_interval".

Signed-off-by: Peter W Morreale <pmorreale@novell.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:35 -08:00
Paul Mundt
dd8632a12e NOMMU: Make mmap allocation page trimming behaviour configurable.
NOMMU mmap allocates a piece of memory for an mmap that's rounded up in size to
the nearest power-of-2 number of pages.  Currently it then discards the excess
pages back to the page allocator, making that memory available for use by other
things.  This can, however, cause greater amount of fragmentation.

To counter this, a sysctl is added in order to fine-tune the trimming
behaviour.  The default behaviour remains to trim pages aggressively, while
this can either be disabled completely or set to a higher page-granular
watermark in order to have finer-grained control.

vm region vm_top bits taken from an earlier patch by David Howells.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Mike Frysinger <vapier.adi@gmail.com>
2009-01-08 12:04:47 +00:00
David Rientjes
2da02997e0 mm: add dirty_background_bytes and dirty_bytes sysctls
This change introduces two new sysctls to /proc/sys/vm:
dirty_background_bytes and dirty_bytes.

dirty_background_bytes is the counterpart to dirty_background_ratio and
dirty_bytes is the counterpart to dirty_ratio.

With growing memory capacities of individual machines, it's no longer
sufficient to specify dirty thresholds as a percentage of the amount of
dirtyable memory over the entire system.

dirty_background_bytes and dirty_bytes specify quantities of memory, in
bytes, that represent the dirty limits for the entire system.  If either
of these values is set, its value represents the amount of dirty memory
that is needed to commence either background or direct writeback.

When a `bytes' or `ratio' file is written, its counterpart becomes a
function of the written value.  For example, if dirty_bytes is written to
be 8096, 8K of memory is required to commence direct writeback.
dirty_ratio is then functionally equivalent to 8K / the amount of
dirtyable memory:

	dirtyable_memory = free pages + mapped pages + file cache

	dirty_background_bytes = dirty_background_ratio * dirtyable_memory
		-or-
	dirty_background_ratio = dirty_background_bytes / dirtyable_memory

		AND

	dirty_bytes = dirty_ratio * dirtyable_memory
		-or-
	dirty_ratio = dirty_bytes / dirtyable_memory

Only one of dirty_background_bytes and dirty_background_ratio may be
specified at a time, and only one of dirty_bytes and dirty_ratio may be
specified.  When one sysctl is written, the other appears as 0 when read.

The `bytes' files operate on a page size granularity since dirty limits
are compared with ZVC values, which are in page units.

Prior to this change, the minimum dirty_ratio was 5 as implemented by
get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user
written value between 0 and 100.  This restriction is maintained, but
dirty_bytes has a lower limit of only one page.

Also prior to this change, the dirty_background_ratio could not equal or
exceed dirty_ratio.  This restriction is maintained in addition to
restricting dirty_background_bytes.  If either background threshold equals
or exceeds that of the dirty threshold, it is implicitly set to half the
dirty threshold.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:03 -08:00
Greg Kroah-Hartman
bb20698d46 Document kernel taint flags properly
This fills in the documentation for all of the current kernel taint
flags, and fixes the number for TAINT_CRAP, which was incorrectly
described.

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-29 15:03:49 -07:00
Greg Kroah-Hartman
061b1bd394 Staging: add TAINT_CRAP for all drivers/staging code
We need to add a flag for all code that is in the drivers/staging/
directory to prevent all other kernel developers from worrying about
issues here, and to notify users that the drivers might not be as good
as they are normally used to.

Based on code from Andreas Gruenbacher and Jeff Mahoney to provide a
TAINT flag for the support level of a kernel module in the Novell
enterprise kernel release.

This is the kernel portion of this feature, the ability for the flag to
be set needs to be done in the build process and will happen in a
follow-up patch.

Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: Jeff Mahoney <jeffm@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-10 15:31:05 -07:00
Andrew Morton
b4d19cc84e Documentation/sysctl/kernel.txt: fix softlockup_thresh description
- s/s/seconds/

- s/10 seconds/60 seconds/

- Mention the zero-disables-it feature.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-23 08:09:14 -07:00
Matt LaPlante
d91958815d Documentation cleanup: trivial misspelling, punctuation, and grammar corrections.
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:06 -07:00
Michael Opdenacker
ac76cff2ec Documentation: sysctl/kernel.txt: fix documentation reference
This patch fixes a reference to Documentation/kmod.txt
which was apparently renamed to Documentation/debugging-modules.txt

Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-13 16:21:20 -08:00
Jiri Kosina
1ec7fd50ba brk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re:
Document randomize_va_space and CONFIG_COMPAT_BRK.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:08 +01:00
David Rientjes
fef1bdd68c oom: add sysctl to enable task memory dump
Adds a new sysctl, 'oom_dump_tasks', that enables the kernel to produce a
dump of all system tasks (excluding kernel threads) when performing an
OOM-killing.  Information includes pid, uid, tgid, vm size, rss, cpu,
oom_adj score, and name.

This is helpful for determining why there was an OOM condition and which
rogue task caused it.

It is configurable so that large systems, such as those with several
thousand tasks, do not incur a performance penalty associated with dumping
data they may not desire.

If an OOM was triggered as a result of a memory controller, the tasklist
shall be filtered to exclude tasks that are not a member of the same
cgroup.

Cc: Andrea Arcangeli <andrea@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:19 -08:00
Eric Dumazet
9cfe015aa4 get rid of NR_OPEN and introduce a sysctl_nr_open
NR_OPEN (historically set to 1024*1024) actually forbids processes to open
more than 1024*1024 handles.

Unfortunatly some production servers hit the not so 'ridiculously high
value' of 1024*1024 file descriptors per process.

Changing NR_OPEN is not considered safe because of vmalloc space potential
exhaust.

This patch introduces a new sysctl (/proc/sys/fs/nr_open) wich defaults to
1024*1024, so that admins can decide to change this limit if their workload
needs it.

[akpm@linux-foundation.org: export it for sparc64]
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:06 -08:00
Bron Gondwana
195cf453d2 mm/page-writeback: highmem_is_dirtyable option
Add vm.highmem_is_dirtyable toggle

A 32 bit machine with HIGHMEM64 enabled running DCC has an MMAPed file of
approximately 2Gb size which contains a hash format that is written
randomly by the dbclean process.  On 2.6.16 this process took a few
minutes.  With lowmem only accounting of dirty ratios, this takes about 12
hours of 100% disk IO, all random writes.

Include a toggle in /proc/sys/vm/highmem_is_dirtyable which can be set to 1 to
add the highmem back to the total available memory count.

[akpm@linux-foundation.org: Fix the CONFIG_DETECT_SOFTLOCKUP=y build]
Signed-off-by: Bron Gondwana <brong@fastmail.fm>
Cc: Ethan Solomita <solo@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:18 -08:00
Nishanth Aravamudan
d5dbac87b4 Documentation: update hugetlb information
The hugetlb documentation has gotten a bit out of sync with the current code.
Updated the sysctl file to refer to Documentation/vm/hugetlbpage.txt.  Update
that file to contain the current state of affairs (with the newer named sysctl
in place).

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:17 -08:00
Pavel Machek
24950898ff vm.txt: document min_free_pages as critical for correctness
min_free_pages is critical for correctness, document it as such.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:06 -07:00
Jesper Juhl
ea069f46fc Add a 00-INDEX file to Documentation/sysctl/
Add a 00-INDEX file to Documentation/sysctl/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Rob Landley <rob@landley.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:05 -07:00
Ravikiran G Thirumalai
c4f3b63fe1 softlockup: add a /proc tuning parameter
Control the trigger limit for softlockup warnings.  This is useful for
debugging softlockups, by lowering the softlockup_thresh to identify
possible softlockups earlier.

This patch:
1. Adds a sysctl softlockup_thresh with valid values of 1-60s
   (Higher value to disable false positives)
2. Changes the softlockup printk to print the cpu softlockup time

[akpm@linux-foundation.org: Fix various warnings and add definition of "two"]
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
David Rientjes
fe071d7e8a oom: add oom_kill_allocating_task sysctl
Adds a new sysctl, 'oom_kill_allocating_task', which will automatically kill
the OOM-triggering task instead of scanning through the tasklist to find a
memory-hogging target.  This is helpful for systems with an insanely large
number of tasks where scanning the tasklist significantly degrades
performance.

Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:46 -07:00
Mel Gorman
ed7ed36517 handle kernelcore=: generic
This patch adds the kernelcore= parameter for x86.

Once all patches are applied, a new command-line parameter exist and a new
sysctl.  This patch adds the necessary documentation.

From: Yasunori Goto <y-goto@jp.fujitsu.com>

  When "kernelcore" boot option is specified, kernel can't boot up on ia64
  because of an infinite loop.  In addition, the parsing code can be handled
  in an architecture-independent manner.

  This patch uses common code to handle the kernelcore= parameter.  It is
  only available to architectures that support arch-independent zone-sizing
  (i.e.  define CONFIG_ARCH_POPULATES_NODE_MAP).  Other architectures will
  ignore the boot parameter.

[bunk@stusta.de: make cmdline_parse_kernelcore() static]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Andrew Morton
97d8f83cb7 Add Documentation/sysctl/ctl_unnumbered.txt
Poeple keep on adding new numbered sysctls, when they're supposed not to.

Add a documentation file which explain why new sysctls should use
CTL_UNNUMBERED.  The next patch will sprinkle pointers to this throughout
sysctl.c.

Eric provided the text (thanks)

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:49 -07:00
KAMEZAWA Hiroyuki
f0c0b2b808 change zonelist order: zonelist order selection logic
Make zonelist creation policy selectable from sysctl/boot option v6.

This patch makes NUMA's zonelist (of pgdat) order selectable.
Available order are Default(automatic)/ Node-based / Zone-based.

[Default Order]
The kernel selects Node-based or Zone-based order automatically.

[Node-based Order]
This policy treats the locality of memory as the most important parameter.
Zonelist order is created by each zone's locality. This means lower zones
(ex. ZONE_DMA) can be used before higher zone (ex. ZONE_NORMAL) exhausion.
IOW. ZONE_DMA will be in the middle of zonelist.
current 2.6.21 kernel uses this.

Pros.
 * A user can expect local memory as much as possible.
Cons.
 * lower zone will be exhansted before higher zone. This may cause OOM_KILL.

Maybe suitable if ZONE_DMA is relatively big and you never see OOM_KILL
because of ZONE_DMA exhaution and you need the best locality.

(example)
assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL.

*node(0)'s memory allocation order:

 node(0)'s NORMAL -> node(0)'s DMA -> node(1)'s NORMAL.

*node(1)'s memory allocation order:

 node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA.

[Zone-based order]
This policy treats the zone type as the most important parameter.
Zonelist order is created by zone-type order. This means lower zone
never be used bofere higher zone exhaustion.
IOW. ZONE_DMA will be always at the tail of zonelist.

Pros.
 * OOM_KILL(bacause of lower zone) occurs only if the whole zones are exhausted.
Cons.
 * memory locality may not be best.

(example)
assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL.

*node(0)'s memory allocation order:

 node(0)'s NORMAL -> node(1)'s NORMAL -> node(0)'s DMA.

*node(1)'s memory allocation order:

 node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA.

bootoption "numa_zonelist_order=" and proc/sysctl is supporetd.

command:
%echo N > /proc/sys/vm/numa_zonelist_order

Will rebuild zonelist in Node-based order.

command:
%echo Z > /proc/sys/vm/numa_zonelist_order

Will rebuild zonelist in Zone-based order.

Thanks to Lee Schermerhorn, he gives me much help and codes.

[Lee.Schermerhorn@hp.com: add check_highest_zone to build_zonelists_in_zone_order]
[akpm@linux-foundation.org: build fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "jesse.barnes@intel.com" <jesse.barnes@intel.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:35 -07:00
Eric Paris
ed03218951 security: Protection for exploiting null dereference using mmap
Add a new security check on mmap operations to see if the user is attempting
to mmap to low area of the address space.  The amount of space protected is
indicated by the new proc tunable /proc/sys/vm/mmap_min_addr and defaults to
0, preserving existing behavior.

This patch uses a new SELinux security class "memprotect."  Policy already
contains a number of allow rules like a_t self:process * (unconfined_t being
one of them) which mean that putting this check in the process class (its
best current fit) would make it useless as all user processes, which we also
want to protect against, would be allowed. By taking the memprotect name of
the new class it will also make it possible for us to move some of the other
memory protect permissions out of 'process' and into the new class next time
we bump the policy version number (which I also think is a good future idea)

Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2007-07-11 22:52:29 -04:00
Matt LaPlante
a982ac06b0 misc doc and kconfig typos
Fix various typos in kernel docs and Kconfigs, 2.6.21-rc4.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:15 +02:00
Robert P. J. Day
beb7dd86a1 Fix misspellings collected by members of KJ list.
Fix the misspellings of "propogate", "writting" and (oh, the shame
:-) "kenrel" in the source tree.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 07:14:03 +02:00
Yasunori Goto
2b744c01a5 mm: fix handling of panic_on_oom when cpusets are in use
The current panic_on_oom may not work if there is a process using
cpusets/mempolicy, because other nodes' memory may remain.  But some people
want failover by panic ASAP even if they are used.  This patch makes new
setting for its request.

This is tested on my ia64 box which has 3 nodes.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Ethan Solomita <solo@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:55 -07:00
Chuck Ebbert
0741f4d207 [PATCH] x86: add sysctl for kstack_depth_to_print
Add sysctl for kstack_depth_to_print. This lets users change
the amount of raw stack data printed in dump_stack() without
having to reboot.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 02:14:11 +01:00
Matt LaPlante
5d3f083d8f Fix typos in /Documentation : Misc
This patch fixes typos in various Documentation txts. The patch addresses some
misc words.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 05:21:10 +01:00
Matthias Urlichs
cd0810410b [PATCH] document the core-dump-to-a-pipe patch
The pipe-a-coredump-to-a-program feature was undocumented.
*Grumble*.

NB: a good enhancement to that patch would be: save all the stuff that a
core file can get from the %x expansions in the environment.

Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:22 -07:00
Christoph Lameter
0ff38490c8 [PATCH] zone_reclaim: dynamic slab reclaim
Currently one can enable slab reclaim by setting an explicit option in
/proc/sys/vm/zone_reclaim_mode.  Slab reclaim is then used as a final
option if the freeing of unmapped file backed pages is not enough to free
enough pages to allow a local allocation.

However, that means that the slab can grow excessively and that most memory
of a node may be used by slabs.  We have had a case where a machine with
46GB of memory was using 40-42GB for slab.  Zone reclaim was effective in
dealing with pagecache pages.  However, slab reclaim was only done during
global reclaim (which is a bit rare on NUMA systems).

This patch implements slab reclaim during zone reclaim.  Zone reclaim
occurs if there is a danger of an off node allocation.  At that point we

1. Shrink the per node page cache if the number of pagecache
   pages is more than min_unmapped_ratio percent of pages in a zone.

2. Shrink the slab cache if the number of the nodes reclaimable slab pages
   (patch depends on earlier one that implements that counter)
   are more than min_slab_ratio (a new /proc/sys/vm tunable).

The shrinking of the slab cache is a bit problematic since it is not node
specific.  So we simply calculate what point in the slab we want to reach
(current per node slab use minus the number of pages that neeed to be
allocated) and then repeately run the global reclaim until that is
unsuccessful or we have reached the limit.  I hope we will have zone based
slab reclaim at some point which will make that easier.

The default for the min_slab_ratio is 5%

Also remove the slab option from /proc/sys/vm/zone_reclaim_mode.

[akpm@osdl.org: cleanups]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:51 -07:00
Alexey Dobriyan
a2e0b56316 [PATCH] Fix docs for fs.suid_dumpable
Sergey Vlasov noticed that there is not kernel.suid_dumpable, but
fs.suid_dumpable.

How KERN_SETUID_DUMPABLE ended up in fs_table[]? Hell knows...

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:28 -07:00
Maxime Bizon
8b23d04dd2 [PATCH] doc: update panic_on_oops documentation
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06 08:57:47 -07:00
Christoph Lameter
9614634fe6 [PATCH] ZVC/zone_reclaim: Leave 1% of unmapped pagecache pages for file I/O
It turns out that it is advantageous to leave a small portion of unmapped file
backed pages if all of a zone's pages (or almost all pages) are allocated and
so the page allocator has to go off-node.

This allows recently used file I/O buffers to stay on the node and
reduces the times that zone reclaim is invoked if file I/O occurs
when we run out of memory in a zone.

The problem is that zone reclaim runs too frequently when the page cache is
used for file I/O (read write and therefore unmapped pages!) alone and we have
almost all pages of the zone allocated.  Zone reclaim may remove 32 unmapped
pages.  File I/O will use these pages for the next read/write requests and the
unmapped pages increase.  After the zone has filled up again zone reclaim will
remove it again after only 32 pages.  This cycle is too inefficient and there
are potentially too many zone reclaim cycles.

With the 1% boundary we may still remove all unmapped pages for file I/O in
zone reclaim pass.  However.  it will take a large number of read and writes
to get back to 1% again where we trigger zone reclaim again.

The zone reclaim 2.6.16/17 does not show this behavior because we have a 30
second timeout.

[akpm@osdl.org: rename the /proc file and the variable]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:26:59 -07:00
Christoph Lameter
34aa1330f9 [PATCH] zoned vm counters: zone_reclaim: remove /proc/sys/vm/zone_reclaim_interval
The zone_reclaim_interval was necessary because we were not able to determine
how many unmapped pages exist in a zone.  Therefore we had to scan in
intervals to figure out if any pages were unmapped.

With the zoned counters and NR_ANON_PAGES we now know the number of pagecache
pages and the number of mapped pages in a zone.  So we can simply skip the
reclaim if there is an insufficient number of unmapped pages.  We use
SWAP_CLUSTER_MAX as the boundary.

Drop all support for /proc/sys/vm/zone_reclaim_interval.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:35 -07:00
KAMEZAWA Hiroyuki
fadd8fbd15 [PATCH] support for panic at OOM
This patch adds panic_on_oom sysctl under sys.vm.

When sysctl vm.panic_on_oom = 1, the kernel panics intead of killing rogue
processes.  And if vm.panic_on_oom is 0 the kernel will do oom_kill() in
the same way as it does today.  Of course, the default value is 0 and only
root can modifies it.

In general, oom_killer works well and kill rogue processes.  So the whole
system can survive.  But there are environments where panic is preferable
rather than kill some processes.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:47 -07:00
Pavel Machek
c255d844dd [PATCH] suspend-to-ram: allow video options to be set at runtime
Currently, acpi video options can only be set on kernel command line.  That's
little inflexible; I'd like userland s2ram application that just works, and
modifying kernel command line according to whitelist is not fun.  It is better
to just allow s2ram application to set video options just before suspend
(according to the whitelist).

This implements sysctl to allow setting suspend video options without reboot.

(akpm: Documentation updates for this new sysctl are pending..)

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20 20:00:10 -08:00
Christoph Lameter
2a16e3f4b0 [PATCH] Reclaim slab during zone reclaim
If large amounts of zone memory are used by empty slabs then zone_reclaim
becomes uneffective.  This patch shakes the slab a bit.

The problem with this patch is that the slab reclaim is not containable to a
zone.  Thus slab reclaim may affect the whole system and be extremely slow.
This also means that we cannot determine how many pages were freed in this
zone.  Thus we need to go off node for at least one allocation.

The functionality is disabled by default.

We could modify the shrinkers to take a zone parameter but that would be quite
invasive.  Better ideas are welcome.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter
1b2ffb7896 [PATCH] Zone reclaim: Allow modification of zone reclaim behavior
In some situations one may want zone_reclaim to behave differently.  For
example a process writing large amounts of memory will spew unto other nodes
to cache the writes if many pages in a zone become dirty.  This may impact the
performance of processes running on other nodes.

Allowing writes during reclaim puts a stop to that behavior and throttles the
process by restricting the pages to the local zone.

Similarly one may want to contain processes to local memory by enabling
regular swap behavior during zone_reclaim.  Off node memory allocation can
then be controlled through memory policies and cpusets.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter
2a11ff06d7 [PATCH] zone_reclaim: configurable off node allocation period.
Currently the zone_reclaim code has a fixed window of 30 seconds of off node
allocations should a local zone have no unused pagecache pages left.  Reclaim
will be attempted again after this timeout period to avoid repeated useless
scans for memory.  This is also useful to established sufficiently large off
node allocation chunks to relieve the local node.

It may be beneficial to adjust that time period for some special situations.
For example if memory use was exceeding node capacity one may want to give up
for longer periods of time.  If memory spikes intermittendly then one may want
to shorten the time period to reduce the number of off node allocations.

This patch allows just that....

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter
1743660b91 [PATCH] Zone reclaim: proc override
proc support for zone reclaim

This patch creates a proc entry /proc/sys/vm/zone_reclaim_mode that may be
used to override the automatic determination of the zone reclaim made on
bootup.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:17 -08:00
Rohit Seth
8ad4b1fb82 [PATCH] Make high and batch sizes of per_cpu_pagelists configurable
As recently there has been lot of traffic on the right values for batch and
high water marks for per_cpu_pagelists.  This patch makes these two
variables configurable through /proc interface.

A new tunable /proc/sys/vm/percpu_pagelist_fraction is added.  This entry
controls the fraction of pages at most in each zone that are allocated for
each per cpu page list.  The min value for this is 8.  It means that we
don't allow more than 1/8th of pages in each zone to be allocated in any
single per_cpu_pagelist.

The batch value of each per cpu pagelist is also updated as a result.  It
is set to pcp->high/4.  The upper limit of batch is (PAGE_SHIFT * 8)

Signed-off-by: Rohit Seth <rohit.seth@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:12:40 -08:00
Andrew Morton
9d0243bca3 [PATCH] drop-pagecache
Add /proc/sys/vm/drop_caches.  When written to, this will cause the kernel to
discard as much pagecache and/or reclaimable slab objects as it can.  THis
operation requires root permissions.

It won't drop dirty data, so the user should run `sync' first.

Caveats:

a) Holds inode_lock for exorbitant amounts of time.

b) Needs to be taught about NUMA nodes: propagate these all the way through
   so the discarding can be controlled on a per-node basis.

This is a debugging feature: useful for getting consistent results between
filesystem benchmarks.  We could possibly put it under a config option, but
it's less than 300 bytes.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:12:40 -08:00
Alan Cox
d6e7114481 [PATCH] setuid core dump
Add a new `suid_dumpable' sysctl:

This value can be used to query and set the core dump mode for setuid
or otherwise protected/tainted binaries. The modes are

0 - (default) - traditional behaviour.  Any process which has changed
    privilege levels or is execute only will not be dumped

1 - (debug) - all processes dump core when possible.  The core dump is
    owned by the current user and no security is applied.  This is intended
    for system debugging situations only.  Ptrace is unchecked.

2 - (suidsafe) - any binary which normally would not be dumped is dumped
    readable by root only.  This allows the end user to remove such a dump but
    not access it directly.  For security reasons core dumps in this mode will
    not overwrite one another or other files.  This mode is appropriate when
    adminstrators are attempting to debug problems in a normal environment.

(akpm:

> > +EXPORT_SYMBOL(suid_dumpable);
>
> EXPORT_SYMBOL_GPL?

No problem to me.

> >  	if (current->euid == current->uid && current->egid == current->gid)
> >  		current->mm->dumpable = 1;
>
> Should this be SUID_DUMP_USER?

Actually the feedback I had from last time was that the SUID_ defines
should go because its clearer to follow the numbers. They can go
everywhere (and there are lots of places where dumpable is tested/used
as a bool in untouched code)

> Maybe this should be renamed to `dump_policy' or something.  Doing that
> would help us catch any code which isn't using the #defines, too.

Fair comment. The patch was designed to be easy to maintain for Red Hat
rather than for merging. Changing that field would create a gigantic
diff because it is used all over the place.

)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:26 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00