No need to pass the planelist when everyone just uses
dev->mode_config.plane_list anyway.
I want to add a pile more of iterators with unified (obj, dev)
arguments. This is just prep.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Use the CRC PWM device in intel_panel.c and add new MIPI backlight
specififc callbacks
v2: Modify to use pwm_config callback
v3: Addressed Jani's comments
- Renamed all function as pwm_* instead of vlv_*
- Call intel_panel_actually_set_backlight in enable function
- Return -ENODEV in case pwm_get fails
- in case pwm_config error return error cdoe from pwm_config
- Cleanup pwm in intel_panel_destroy_backlight
v4: Removed unused #defines and initialized backlight with INVALID_PIPE (Ville)
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The CRC (Crystal Cove) PMIC, controls the panel enable and disable
signals for BYT for dsi panels. This is indicated in the VBT fields. Use
that to initialize and use GPIO based control for these signals.
v2: Use the newer gpiod interface(Alexandre)
v3: Remove the redundant checks and unused code (Ville)
v4: Moved PWM vs SoC backlight #defines to intel_bios.h (Jani)
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch makes use of the new amd headers (that are part of the new
amdgpu driver), instead of private defines.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The MAP_QUEUES packet length for Carrizo is different than for Kaveri.
Therefore, we now need to calculate the runlist length with regard to the
underlying H/W.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds support for the VI APU in the DQM module.
Most of the functionality of DQM is shared between CI and VI. Therefore,
only a handful of functions are required to be in the
H/W-specific part of DQM.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch implements all the VI MQD manager functions.
This is done in a different file as the MQD format is different
between CI and VI
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the PCI IDs of supported CZ devices to the
supported_devices structure in amdkfd. That structure is used during the
amdkfd probing stage, to check if the currently probed device is eligible
to be handled by amdkfd.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the gfx8 interface file between amdgpu and amdkfd. This
interface file is currently in use when running on a Carrizo-based
system.
The interface itself is represented by a pointer to struct
kfd_dev. The pointer is located inside amdgpu_device structure.
All the register accesses that amdkfd need are done using this
interface. This allows us to avoid direct register accesses in
amdkfd proper, while also allows us to avoid locking between
amdkfd and amdgpu.
The single exception is the doorbells that are used in both of
the drivers. However, because they are located in separate pci
bar pages, the danger of sharing registers between the drivers
is minimal.
Having said that, we are planning to move the doorbells as well
to amdgpu.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the gfx7 interface file between amdgpu and amdkfd. This
interface file mirrors (some) of the functions in radeon_kfd.c
(the interface file between radeon and amdkfd).
The gfx7 interface is used when it is run on a Kaveri-based system.
This interface file was used for bring-up of amdkfd on amdgpu and for
debugging purposes. For users who would like to run HSA on Kaveri, please
use the radeon graphic driver.
Note: CONFIG_DRM_AMDGPU_CIK must be selected for amdgpu to handle Kaveri.
v2: removed MTYPE_NONCACHED enum definition as it is defined in another
patch
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds an interface file between amdgpu and amdkfd. This
interface file is H/W agnostic, thus containing functions that
operate the same for any AMD APU/GPU H/W generation.
The functions in this interface mirror (some) of the functions in
radeon_kfd.c (the radeon<-->amdkfd interface file). The main functions
are:
- amdgpu_amdkfd_init - initialize the amdkfd module
- amdgpu_amdkfd_load_interface - load the H/W interface according to the
currently probed device
- amdgpu_amdkfd_device_probe - probe the device in amdkfd
- amdgpu_amdkfd_device_init - initialize the device in amdkfd
- amdgpu_amdkfd_interrupt - call the ISR of amdkfd
- amdgpu_amdkfd_suspend - suspend callback from amdgpu
- amdgpu_amdkfd_resume - resume callback from amdgpu
This patch also modifies the relevant amdgpu files, to use this new
interface.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch splits the KGD_ENGINE_SDMA to KGD_ENGINE_SDMA1 and
KGD_ENGINE_SDMA2 to match CZ definitions.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Calls to set_memory_wb() incure heavy TLB flush and IPI cost. To
minimize those wait until pool grow beyond batch size before
draining the pool.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Current code never allowed the page pool to actualy fill in anyway.
This fix it, so that we only start freeing page from the pool when
we go over the pool size.
Changed since v1:
- Move the page batching optimization to its separate patch.
Changed since v2:
- Do not remove code part of the batching optimization with
this patch.
- Better commit message.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Time to light a candle and remove the preliminary_hw_support flag.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
on SKL/BXT, the top most plane hardware is shared between the legacy
cursor registers and an actual plane. Daniel and Ville don't want to
expose 2 DRM planes and would rather expose a CURSOR plane that has all
the usual plane properties, and that's a blocker for lifting the
prelimary_hw_support flag.
Unfortunately noone has had the time to finish this yet, but lifting the
prelimary_hw_support flag is long overdue. As an intermediate solution
we can merely not expose the top most plane
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix divide by zero if we end up updating the watermarks
with zero dotclock.
This is a stop gap measure to allow module load in cases
where our state keeping fails.
v2: WARN_ON added (Paulo)
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ttm_bo_validate() returns 0 or error. So we can return the value
directly and remove the variable 'ret'.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These variables were assigned some values but they were never used.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These patches fix the parallel-display driver to use the standard OF
graph bindings for connecting a drm_panel via device tree instead of
an undocumented, driver specific device tree property, take care to
disable all IPU interrupts before setting up the irq chip to fix a
kexec lockup, and fix VGA output on i.MX53-QSB boards by correcting
the media bus format set by the imx-tve driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pGBQ
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm: fixes for parallel-display, imx-tve, and ipu-common
These patches fix the parallel-display driver to use the standard OF
graph bindings for connecting a drm_panel via device tree instead of
an undocumented, driver specific device tree property, take care to
disable all IPU interrupts before setting up the irq chip to fix a
kexec lockup, and fix VGA output on i.MX53-QSB boards by correcting
the media bus format set by the imx-tve driver.
* tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux:
drm/imx: tve: fix media bus format for VGA output
GPU: ipu: fix lockup caused by pending chained interrupts
drm/imx: parallel-display: fix drm_panel support
A range of fixes for the Armada DRM driver:
- A missing wakeup could result in overlay frames being delayed, causing
video playback to hiccup.
- Avoid unmapping a dma-buf attachment which was never mapped
- Fix the overlay when partially off the screen by switching to the
drm_plane_helper_check_update() helper and using the calculated
coordinates to set the start address.
- Remove an incorrect assignment to crtc->mode - which should be the
unadjusted mode.
- Fix a missing call to drm_plane_cleanup() in the overlay code.
* 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: avoid saving the adjusted mode to crtc->mode
drm/armada: fix overlay when partially off-screen
drm/armada: convert overlay to use drm_plane_helper_check_update()
drm/armada: fix gem object free after failed prime import
drm/armada: fix incorrect overlay plane cleanup
drm/armada: fix missing overlay wake-up
Next batch of i915 fixes. Note that the compat32 patch here needs the drm
core one to be actually useful, I'll send you that one with a separate
drm-fixes pull request. One revert because a fix in -rc2 did break
existing userspace.
* tag 'drm-intel-fixes-2015-07-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Do not call intel_crtc_disable if the crtc is already disabled.
Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"
drm/i915: Forward all core DRM ioctls to core compat handling
drm/i915: fix oops in primary_check_plane
drm/i915: remove unused has_dma_mapping flag
drm/i915: Fix missing return warning for !CONFIG_DEBUGFS
drm/i915: avoid leaking DMA mappings
drm/i915: Snapshot seqno of most recently submitted request.
drm/i915: Store device pointer in contexts for late tracepoint usafe
Ok next attempt at drm-fixes pull. Big thing really is just the compat32
one for addfb2.1.
* tag 'topic/drm-fixes-2015-07-16' of git://anongit.freedesktop.org/drm-intel:
drm: Provide compat ioctl for addfb2.1
Documentation: drm: Fix tablulation in KMS properties table
drm: add a check for x/y in drm_mode_setcrtc
drm/rockchip: use drm_gem_mmap helpers
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
So the selected forced level shows up properly in sysfs.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is necessary to properly reset the min/max limits before
clamping them otherwise we may get improper clamping depending
on what what was the last forced level.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always respect the harvest configuration as is.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.
v2: fix logic as noted by Christian
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Port of amdgpu patch 9298e52f8b.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be the case when the GPU is powered off, e.g. via vgaswitcheroo
or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin
flushes the TLB after setting rdev->gart.ptr to non-NULL.
Fixes panic on powering off R7xx GPUs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Universal planes may not be assigned to the current crtc, so only
update crtc->x/y when the primary is part of the state and bound
to the current crtc.
Changes since v1:
- Add the crtc check.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This really doesn't seem to have much chance of working anymore,
esp for irq context, qxl at least tries to talk to the hw,
and waits for irqs, and fails.
with runtime pm and other stuff I think we should just
bail on this for now.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We're not supposed to store the adjusted mode into crtc->mode. We don't
use it anyway, so we can safely remove this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix the start address calculation when overlay is partially off screen.
fb->bits_per_pixel is not set for YUV formats, and is always zero, which
led to the first component always starting at zero.
Use drm_format_plane_cpp() instead.
This also revealed a problem in that YUYV formats toggle the U/V data
for odd pixel start address offsets. We try to rectify that by
toggling the U/V swap, which for the most part works, but seemingly
introduces a flicker for one scan frame of swapped U/V.
However, these changes result in an overall improvement.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use drm_plane_helper_check_update() rather than our own code to validate
and limit the size of the displayed image. As we are able to support
scaling, permit the full scaling ability.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix the gem object freeing after a partial import of a dma buffer,
eg, one which has been imported, but not mapped. This was provoking
a warning from the dma_buf code.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The Armada overlay plane wasn't being properly cleaned up as it was
missing a call to drm_plane_cleanup(). It also wasn't freeing the
right type of pointer (although we were still freeing the right
pointer value.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nothing was waking up the overlay plane wait queue, so we were fully
reliant on the HZ/25 wait timing out to make progress. Fix the lack
of wake-up.
We were also mis-handling the wait_event_timeout() return value - this
returns an unsigned integer of the remaining time, or zero on timeout
and the condition evaluated false. Checking this for less than zero
is not sane.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fastboot should only downgrade a modeset if we have a match, not be
used to upgrade to a full modeset. Otherwise we can only use it in a
very restricted way: Initial modeset when the request mode is the
preferred one of the panel and there's still a pfit active. And that
only works because our mode_from_pipe_config fills in the wrong mode
(it takes the adjusted mode, not the requested one).
But we want fast modesets everywhere even after boot-up (especially
for testing, but not only there). Hence we need to be able to make any
modeset a fast one, which means we need to invert the logic and
optionally downgrade a modeset.
Note that this needs ->connector_changed split out from ->mode_changed
otherwise it's not going to work (because we might loose a modeset
because connectors changed but otherwise the config matches). As soon
as that's merged we can drop the i915.fastboot check from this code.
Also make sure that we don't accidentally clear any_ms and that we add
the planes for any kind of modeset.
Finally rename fastboot to fastset (yeah it's a silly name) since this
really isn't about booting all that much.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we both set mode->private_flags to some value and also use
the pipe_config quirk. But since the pipe_config quirk isn't tied to
the lifetime of the mode object we need to check both.
Simplify this by only using mode.private_flags and stop using the
INHERITED_MODE quirk. Also for clarity add an explicit #define for
that driver priavete mode flag.
By using crtc_state->mode_changed we can also remove the recalc local
variable.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we recompute the pipe config for all CRTCs that have changed
we don't have problems with stale configuration data for the global
pfit and can remove this hack. Yay!
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes in
4.2-rc are addressed already (by converting more towards atomic
instead of minimal duct-tape) so just always pick the version in next
for the conflicts in modeset code.
All the other conflicts are just adjacent lines changed.
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_ringbuffer.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This can only fail because of a bug in the code.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in follow-up to also remove start_vbl_count from
intel_crtc->atomic and put it into the intel_crtc directly - it's not
precomputed state.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We needed this originally for updating pagetables in plane commit
functions. But that's extracted into prepare/cleanup now. The other
issue was running updates when the pipe was off. That's also now
fixed.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that there's only a single path for all atomic updates we can call
intel_(pre/post)_plane_update from intel_atomic_commit directly. This
makes the intention more clear.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Huzzah! \o/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect context w/a batch buffer,
+WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: explain why part of the WA is in Per ctx batch (Mika)
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect context w/a batch buffer,
+WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt
v2: address static checker warning where unsigned value was checked for
less than zero which is never true (Dan Carpenter).
v3: The WA uses default value of GEN8_L3SQCREG4 during flush but that disables
some other WA; update default value to retain it and document dependency (Mika).
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect and Per context w/a batch buffer,
+WaDisableCtxRestoreArbitration
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: use updated macro.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Robert Beckett <robert.beckett@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch only enables support for Gen9, the actual WA will be
initialized in subsequent patches.
The WARN that we use to warn user if WA batch support is not available
for a particular Gen is replaced with DRM_ERROR as warning here doesn't
really add much value.
v2: include all infrastructure bits in this patch so that subsequent
changes only correspond the WA added (Chris)
v3: use updated macro.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch fix following warnings.
Warning(.//drivers/gpu/drm/drm_irq.c:1279): No description
found for parameter drm_crtc'
Warning(.//drivers/gpu/drm/drm_irq.c:1279): Excess function
parameter 'crtc' description in 'drm_crtc_vblank_reset'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I was confused shortly whether the compat was needed for the int,
until I noticed the pointer in the original.
Also remove typedef.
v2: Review from Chris.
- Add comments.
- Also change the int param in the original structure.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Frame buffer modifiers extensions provided in;
commit e3eb3250d8
Author: Rob Clark <robdclark@gmail.com>
Date: Thu Feb 5 14:41:52 2015 +0000
drm: add support for tiled/compressed/etc modifier in addfb2
Missed the structure packing/alignment problem where 64-bit
members were added after the odd number of 32-bit ones. This
makes the compiler produce structures of different sizes under
32- and 64-bit x86 targets and makes the ioctl need explicit
compat handling.
v2: Removed the typedef. (Daniel Vetter)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org
[danvet: Squash in compile fix from Mika.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This fixes the breakage caused by
commit eddfcbcdc2
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Mon Jun 15 12:33:53 2015 +0200
drm/i915: Update less state during modeset.
No need to repeatedly call update_watermarks, or update_fbc.
Down to a single call to update_watermarks in .crtc_enable
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by(IVB): Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add missing shared dpll disable to the noatomic disable function.
This function will be replaced by its atomic counterpart soon.
Changes since v1:
- intel_crtc->active and watermarks are fixed by a patch from
Patrik Jakobsson
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fill in driver type, hsync, vrefresh and name.
Those members are not read out but can be calculated from the mode.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated the HAS_CORE_RING_FREQ macro to add the broxton check,
so as to disallow the programming & read of ring frequency
table for it.
Issue: VIZ-5144
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Added a new HAS_CORE_RING_FREQ macro, currently used in
gen6_update_ring_freq & i915_ring_freq_table debugfs function.
The programming & read of ring frequency table is needed for newer
GEN(>=6) platforms, except VLV/CHV.
Issue: VIZ-5144
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Calculate all state using a normal transition, but afterwards fudge
crtc->state->active back to its old value. This should still allow
state restore in setup_hw_state to work properly.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And get rid of things that are no longer true. This function is only
used for forcing a modeset when encoder properties are changed.
Because this is not yet done atomically, assume a full modeset is
needed and force a modeset on the crtc.
Changes since v1:
- s/reset/force modeset/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This allows us to get rid of the set_init_power in
modeset_update_crtc_domains. The state should be sanitized enough
after setup_hw_state to not need the init power.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The previous commit converted hw readout to atomic, all the new_*
members were used for restoring the old state, but with the
conversion of suspend to atomic there's no use left for them.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of all the ad-hoc updating, duplicate the old state first
before reading out the hw state, then restore it.
intel_display_resume is a new function that duplicates the sw state,
then reads out the hw state, and commits the old state.
intel_display_setup_hw_state now only reads out the atomic state.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90396
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Readout initial hw mode, v2.
Atomic requires a mode blob when crtc_state->enable is true, or
you get a huge warn_on.
With a few tweaks the mode we read out from hardware could be used
as the real mode without a modeset, but this requires too much
testing, so for now force a modeset the first time the mode blob's
updated.
This preserves the old behavior, because previously we never set
the initial mode, which always meant that a modeset happened
when the mode was first set.
Changes since v1:
- Add a description in intel_modeset_readout_hw_state of how the
recalculation is done.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is required to properly initialize vblanks on the active crtc.
Without it drm_calc_vbltimestamp_from_scanoutpos can fail with
crtc 0: Noop due to uninitialized mode.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is a WARN_ON in drm_atomic_crtc_check for this when exposing the atomic property.
If the mode_blob still exists, but enable = false then all updates are rejected with -EINVAL.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Unreference the old mode_blob by calling the crtc_destroy_state
helper before zeroing the crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All non-primary planes get disabled during hw readout,
this reduces complexity and means not having to do some plane
visibility checks during the first commit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This change adds the programming of the MOCS registers to the gen 9+
platforms. The set of MOCS configuration entries introduced by this
patch is intended to be minimal but sufficient to cover the needs of
current userspace - i.e. a good set of defaults. It is expected to be
extended in the future to provide further default values or to allow
userspace to redefine its private MOCS tables based on its demand for
additional caching configurations. In this setup, userspace should
only utilize the first N entries, higher entries are reserved for
future use.
It creates a fixed register set that is programmed across the different
engines so that all engines have the same table. This is done as the
main RCS context only holds the registers for itself and the shared
L3 values. By trying to keep the registers consistent across the
different engines it should make the programming for the registers
consistent.
v2:
-'static const' for private data structures and style changes.(Matt Turner)
v3:
- Make the tables "slightly" more readable. (Damien Lespiau)
- Updated tables fix performance regression.
v4:
- Code formatting. (Chris Wilson)
- re-privatised mocs code. (Daniel Vetter)
v5:
- Changed the name of a function. (Chris Wilson)
v6:
- re-based
- Added Mesa table entry (skylake & broxton) (Francisco Jerez)
- Tidied up the readability defines (Francisco Jerez)
- NUMBER of entries defines wrong. (Jim Bish)
- Added comments to clear up the meaning of the tables (Jim Bish)
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
v7 (Francisco Jerez):
- Don't write L3-specific MOCS_ESC/SCC values into the e/LLC control
tables. Prefix L3-specific defines consistently with L3_ and
e/LLC-specific defines with LE_ to avoid this kind of confusion in
the future.
- Change L3CC WT define back to RESERVED (matches my hardware
documentation and the original patch, probably a misunderstanding
of my own previous comment).
- Drop Android tables, define new minimal tables more suitable for the
open source stack.
- Add comment that the MOCS tables are part of the kernel ABI.
- Move intel_logical_ring_begin() and _advance() calls one level down
(Chris Wilson).
- Minor formatting and style fixes.
v8 (Francisco Jerez):
- Add table size sanity check to emit_mocs_control/l3cc_table() (Chris
Wilson).
- Add comment about undefined entries being implicitly set to uncached
for forwards compatibility.
v9 (Francisco Jerez):
- Minor style fixes.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Totatlly forgotten that we have these when nuking all the UMS code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Nothing depends on this outside initial hw readout, so keep this
struct on the stack instead.
Changes since v1:
- Remove unrelated changes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The src and crtc rectangles were never set, resulting in the primary
plane being made invisible on first atomic update.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of doing ad-hoc checks we already have a way of checking
if the state is compatible or not. Use this to force a modeset.
Only during modesets, or with PIPE_CONFIG_QUIRK_INHERITED_MODE
we should check if a full modeset is really needed.
Fastboot will allow the adjust parameter to ignore some stuff
too, and it will fix up differences in state that are ignored
by the compare function.
Changes since v1:
- Increase the value of the lowest m/n to prevent truncation.
- Dump pipe config when fastboot's used, without a modeset.
- Add adjust parameter to intel_compare_link_m_n, which is
used to adjust m2_n2 if it's a multiple of m_n.
- Add exact parameter intel_compare_m_n.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the atomic state instead, this allows removing plane_config
from the crtc after the full hw readout is completed.
The size can be found in the fb, no need for the plane_config.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's not much point for calculating the changes for the old
state. Instead just disable all scalers when disabling. It's
probably good enough to just disable the crtc_scaler, but just in
case there's a bug disable all scalers.
This means intel_atomic_setup_scalers is only called in the crtc
check function now, so all the transitional code can be removed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is probably hard to hit right now because in most cases all
atomic locks are taken, but after conversion to atomic this will make
it more likely to corrupt the crtc->config pointer, resulting in hard
to find bugs.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 19ee835cdb.
It breaks existing old userspace which doesn't handle UNKNOWN
swizzling correct. Yes UNKNOWN was a thing back in 2009 and probably
still is on some other platforms, but it still pretty clearly broke
the testers machine. If we want this we need to extend the ioctl with
new paramters that only new userspace looks at.
Cc: Harald Arnesen <harald@skogtun.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Harald Arnesen <harald@skogtun.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Doesn't really add anything which can't be figured out through
proc files. And more clearly separates the new gem mmap handling
code from the old drm maps mmap handling code, which is surely a
good thing.
Cc: Martin Peres <martin.peres@free.fr>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ring frequency table programming is not required on BXT. Added separate
checks to enable the programming only for SKL & skip for BXT.
v2: Removed the BXT check from gen6_update_ring_freq function
Issue: VIZ-5144
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Previously only core DRM ioctls under the DRM_COMMAND_BASE were being
forwarded, but the drm.h header suggests (and reality confirms) ones
after (and including) DRM_COMMAND_END should be forwarded as well.
We need this to correctly forward the compat ioctl for the botched-up
addfb2.1 extension.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org # 4.1+
[danvet: Explain why this is suddenly needed and add cc: stable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On Sun, Jul 12, 2015 at 09:52:51AM -0700, Linus Torvalds wrote:
> On Sun, Jul 12, 2015 at 1:03 AM, Jörg Otte <jrg.otte@gmail.com> wrote:
> > BUG: unable to handle kernel NULL pointer dereference at 0000000000000009
> > IP: [<ffffffffbd3447bb>] 0xffffffffbd3447bb
>
> Ugh. Please enable KALLSYMS to get sane symbols.
>
> But yes, "crtc_state->base.active" is at offset 9 from "crtc_state",
> so it's pretty clearly just that change frm
>
> - if (intel_crtc->active) {
> + if (crtc_state->base.active) {
>
> and "crtc_state" is NULL.
>
> And the code very much knows that crtc_state can be NULL, since it's
> initialized with
>
> crtc_state = state->base.state ?
> intel_atomic_get_crtc_state(state->base.state,
> intel_crtc) : NULL;
>
> Tssk. Daniel? Should I just revert that commit dec4f799d0
> ("drm/i915: Use crtc_state->active in primary check_plane func") for
> now, or is there a better fix? Like just checking crtc_state for NULL?
Indeed embarrassing. I've missed that we still have 1 caller left that's
using the transitional helpers, and those don't fill out
plane_state->state backpointers to the global atomic update since there is
no global atomic update for transitional helpers. Below diff should fix
this - we need to preferentially check crts_state->active and if that's
not set intel_crtc->active should yield the right result for the one
remaining caller (it's in the crtc_disable paths).
This fixes a regression introduced in
commit dec4f799d0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jul 7 11:15:47 2015 +0200
drm/i915: Use crtc_state->active in primary check_plane func
which was quickly reverted in
commit 01e2d0627a
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun Jul 12 15:00:20 2015 -0700
Revert "drm/i915: Use crtc_state->active in primary check_plane func"
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jörg Otte <jrg.otte@gmail.com>
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
After the previous patch this flag will check always clear, as it's
never set for shmem backed and userptr objects, so we can remove it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Yeah this isn't really fixes but it's a nice cleanup to
clarify the code but not really worth the hassle of backmerging. So
just add to -fixes, we're still early in -rc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This broken code was introduced in
commit aa7471d228
Author: Jani Nikula <jani.nikula@intel.com>
Date: Wed Apr 1 11:15:21 2015 +0300
drm/i915: add i915 specific connector debugfs file for DPCD
v2: Drop hunk that accidentally crept in.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: François Valenduc <francoisvalenduc@gmail.com>
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We have 3 types of DMA mappings for GEM objects:
1. physically contiguous for stolen and for objects needing contiguous
memory
2. DMA-buf mappings imported via a DMA-buf attach operation
3. SG DMA mappings for shmem backed and userptr objects
For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the
corresponding backing pages and so in practice we create/release the
mapping in the object's get_pages/put_pages callback.
For 3. the lifetime of the mapping matches that of any existing GPU binding
of the object, so we'll create the mapping when the object is bound to
the first vma and release the mapping when the object is unbound from its
last vma.
Since the object can be bound to multiple vmas, we can end up creating a
new DMA mapping in the 3. case even if the object already had one. This
is not allowed by the DMA API and can lead to leaked mapping data and
IOMMU memory space starvation in certain cases. For example HW IOMMU
drivers (intel_iommu) allocate a new range from their memory space
whenever a mapping is created, silently overriding a pre-existing
mapping.
Fix this by moving the creation/removal of DMA mappings to the object's
get_pages/put_pages callbacks. These callbacks already check for and do
an early return in case of any nested calls. This way objects of the 3.
case also become more like the other object types.
I noticed this issue by enabling DMA debugging, which got disabled after
a while due to its internal mapping tables getting full. It also reported
errors in connection to random other drivers that did a DMA mapping for
an address that was previously mapped by i915 but was never released.
Besides these diagnostic messages and the memory space starvation
problem for IOMMUs, I'm not aware of this causing a real issue.
The fix is based on a patch from Chris.
v2:
- move the DMA mapping create/remove calls to the get_pages/put_pages
callbacks instead of adding new callbacks for these (Chris)
v3:
- also fix the get_page cache logic on the userptr async path (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The hang checker needs to inspect whether or not the ring request list is empty
as well as if the given engine has reached or passed the most recently
submitted request. The problem with this is that the hang checker cannot grab
the struct_mutex, which is required in order to safely inspect requests since
requests might be deallocated during inspection. In the past we've had kernel
panics due to this very unsynchronized access in the hang checker.
One solution to this problem is to not inspect the requests directly since
we're only interested in the seqno of the most recently submitted request - not
the request itself. Instead the seqno of the most recently submitted request is
stored separately, which the hang checker then inspects, circumventing the
issue of synchronization from the hang checker entirely.
This fixes a regression introduced in
commit 44cdd6d219
Author: John Harrison <John.C.Harrison@Intel.com>
Date: Mon Nov 24 18:49:40 2014 +0000
drm/i915: Convert 'ring_idle()' to use requests not seqnos
v2 (Chris Wilson):
- Pass current engine seqno to ring_idle() from i915_hangcheck_elapsed() rather
than compute it over again.
- Remove extra whitespace.
Issue: VIZ-5998
Signed-off-by: Tomas Elf <tomas.elf@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add regressing commit citation provided by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Watermark calculations depend on the intel_crtc->active flag to be set
properly. Suspend/resume is broken on SKL and we also get DDB mismatches
without this patch.
The regression was introduced in:
commit eddfcbcdc2
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Mon Jun 15 12:33:53 2015 +0200
drm/i915: Update less state during modeset.
No need to repeatedly call update_watermarks, or update_fbc.
Down to a single call to update_watermarks in .crtc_enable
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by(IVB): Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Don't touch disable_shared_dpll()
Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91203
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
