SGEs that are contiguous needlessly consume driver dependent TX resources.
The lkey validation logic is enhanced to compress the SGE that ends
up in the send wqe when consecutive addresses are detected.
The lkey validation API used to return 1 (success) or 0 (fail).
The return value is now an -errno, 0 (compressed), or 1 (uncompressed). A
additional argument is added to pass the last SQE for the compression.
Loopback callers always pass a NULL to last_sge since the optimization is
of little benefit in that situation.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- A fix for fix eea40b8f62 ("infiniband: call ipv6 route lookup via the
stub interface")
- 6 patches against bnxt_re...the first two are considerably larger than
I would like, but as they address real issues I went ahead and
submitted them (it also helped that a good deal of the churn was
removing code repeated in multiple places and consolidating it to one
common function)
- 2 fixes against qedr that just came in
- 1 fix against rxe that took a few revisions to get right plus time to
get the proper reviews
- 5 late breaking IPoIB fixes
- 1 late cxgb4 fix
-----BEGIN PGP SIGNATURE-----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=blNV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"I had thought at the time of the last pull request that there wouldn't
be much more to go, but several things just kept trickling in over the
last week.
Instead of just the six patches to bnxt_re that I had anticipated,
there are another five IPoIB patches, two qedr patches, and a few
other miscellaneous patches.
The bnxt_re patches are more lines of diff than I like to submit this
late in the game. That's mostly because of the first two patches in
the series of six. I almost dropped them just because of the lines of
churn, but on a close review, a lot of the churn came from removing
duplicated code sections and consolidating them into callable
routines. I felt like this made the number of lines of change more
acceptable, and they address problems, so I left them. The remainder
of the patches are all small, well contained, and well understood.
These have passed 0day testing, but have not been submitted to
linux-next (but a local merge test with your current master was
without any conflicts).
Summary:
- A fix for fix eea40b8f62 ("infiniband: call ipv6 route lookup via
the stub interface")
- Six patches against bnxt_re...the first two are considerably larger
than I would like, but as they address real issues I went ahead and
submitted them (it also helped that a good deal of the churn was
removing code repeated in multiple places and consolidating it to
one common function)
- Two fixes against qedr that just came in
- One fix against rxe that took a few revisions to get right plus
time to get the proper reviews
- Five late breaking IPoIB fixes
- One late cxgb4 fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
rdma/cxgb4: Fix memory leaks during module exit
IB/ipoib: Fix memory leak in create child syscall
IB/ipoib: Fix access to un-initialized napi struct
IB/ipoib: Delete napi in device uninit default
IB/ipoib: Limit call to free rdma_netdev for capable devices
IB/ipoib: Fix memory leaks for child interfaces priv
rxe: Fix a sleep-in-atomic bug in post_one_send
RDMA/qedr: Add 64KB PAGE_SIZE support to user-space queues
RDMA/qedr: Initialize byte_len in WC of READ and SEND commands
RDMA/bnxt_re: Remove FMR support
RDMA/bnxt_re: Fix RQE posting logic
RDMA/bnxt_re: Add HW workaround for avoiding stall for UD QPs
RDMA/bnxt_re: Dereg MR in FW before freeing the fast_reg_page_list
RDMA/bnxt_re: HW workarounds for handling specific conditions
RDMA/bnxt_re: Fixing the Control path command and response handling
IB/addr: Fix setting source address in addr6_resolve()
The driver may sleep under a spin lock, and the function call path is:
post_one_send (acquire the lock by spin_lock_irqsave)
init_send_wqe
copy_from_user --> may sleep
There is no flow that makes "qp->is_user" true, and copy_from_user may
cause bug when a non-user pointer is used. So the lines of copy_from_user
and check of "qp->is_user" are removed.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On sparc, if we have an alloca() like situation, as is the case with
SHASH_DESC_ON_STACK(), we can end up referencing deallocated stack
memory. The result can be that the value is clobbered if a trap
or interrupt arrives at just the right instruction.
It only occurs if the function ends returning a value from that
alloca() area and that value can be placed into the return value
register using a single instruction.
For example, in lib/libcrc32c.c:crc32c() we end up with a return
sequence like:
return %i7+8
lduw [%o5+16], %o0 ! MEM[(u32 *)__shash_desc.1_10 + 16B],
%o5 holds the base of the on-stack area allocated for the shash
descriptor. But the return released the stack frame and the
register window.
So if an intererupt arrives between 'return' and 'lduw', then
the value read at %o5+16 can be corrupted.
Add a data compiler barrier to work around this problem. This is
exactly what the gcc fix will end up doing as well, and it absolutely
should not change the code generated for other cpus (unless gcc
on them has the same bug :-)
With crucial insight from Eric Sandeen.
Cc: <stable@vger.kernel.org>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Callers of rxe_mem_copy() provide pointer to store updated CRC
value. That pointer was supposed to be updated, but the
commit cee2688e3c ("IB/rxe: Offload CRC calculation when possible")
mistakenly removed that assignment for RXE_MEM_TYPE_DMA memory type.
The code worked because there are no actual callers with
RXE_MEM_TYPE_DMA, who are interested in returned value of crcp.
The one caller in read_reply(), who uses the returned crcp didn't
set RXE_MEM_TYPE_DMA as mem->type.
Fixes: cee2688e3c ("IB/rxe: Offload CRC calculation when possible")
Reported-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When reading a RDMA WRITE FIRST packet we copy the DMA length from the RDMA
header into the qp->resp.resid variable for later use. Later in check_rkey()
we clamp it to the MTU if the packet is an RDMA WRITE packet and has a
residual length bigger than the MTU. Later in write_data_in() we subtract the
payload of the packet from the residual length. If the packet happens to have a
payload of exactly the MTU size we end up with a residual length of 0 despite
the packet not being the last in the conversation. When the next packet in the
conversation arrives, we don't have any residual length left and thus set the QP
into an error state.
This broke NVMe over Fabrics functionality over rdma_rxe.ko
The patch was verified using the following test.
# echo eth0 > /sys/module/rdma_rxe/parameters/add
# nvme connect -t rdma -a 192.168.155.101 -s 1023 -n nvmf-test
# mkfs.xfs -fK /dev/nvme0n1
meta-data=/dev/nvme0n1 isize=256 agcount=4, agsize=65536 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=0 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
# mount /dev/nvme0n1 /tmp/
[ 148.923263] XFS (nvme0n1): Mounting V4 Filesystem
[ 148.961196] XFS (nvme0n1): Ending clean mount
# dd if=/dev/urandom of=test.bin bs=1M count=128
128+0 records in
128+0 records out
134217728 bytes (134 MB, 128 MiB) copied, 0.437991 s, 306 MB/s
# sha256sum test.bin
cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a test.bin
# cp test.bin /tmp/
sha256sum /tmp/test.bin
cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a /tmp/test.bin
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdma_ah_attr can now be either ib or roce allowing
core components to use one type or the other and also
to define attributes unique to a specific type. struct
ib_ah is also initialized with the type when its first
created. This ensures that calls such as modify_ah
dont modify the type of the address handle attribute.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_destroy_ah to rdma_destroy_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Zero out ib_ah_attr before calling query_ah. Set ah_flags
appropriately.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The Infiniband spec defines "A multicast address is defined by a
MGID and a MLID" (section 10.5).
The current code only uses the MGID for identifying multicast groups.
Update the driver to be compliant with this definition.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We need to call spin_unlock_irqrestore() instead of vanilla
spin_unlock() on this error path.
Fixes: 119a8e708d ("IB/rdmavt: Add AH to rdmavt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Size of pages are held by struct ib_umem in page_size field.
It is better to store it as an exponent, because page size by nature
is always power-of-two and used as a factor, divisor or ilog2's argument.
The conversion of page_size to be page_shift allows to have portable
code and avoid following error while compiling on ARM:
ERROR: "__aeabi_uldivmod" [drivers/infiniband/core/ib_core.ko] undefined!
CC: Selvin Xavier <selvin.xavier@broadcom.com>
CC: Steve Wise <swise@chelsio.com>
CC: Lijun Ou <oulijun@huawei.com>
CC: Shiraz Saleem <shiraz.saleem@intel.com>
CC: Adit Ranadive <aditr@vmware.com>
CC: Dennis Dalessandro <dennis.dalessandro@intel.com>
CC: Ram Amrani <Ram.Amrani@Cavium.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This logic seems to be duplicated in (at least) three separate files.
Move it to one place so code can be re-use.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
In RC QP there is no need to resolve the outgoing interface
for each packet, as this does not change during QP life cycle.
Instead cache the interface on the socket and use that one.
This improves performance by 12% by sparing redundant
calls to rxe_find_route.
ib_send_bw -d rxe0 -x 1 -n 9000 -e -s $((1024 * 1024 )) -l 100
----------------------------------------------------------------------------------------
| | bytes | iterations | BW peak[MB/sec] | BW average[MB/sec] | MsgRate[Mpps] |
----------------------------------------------------------------------------------------
| before | 1048576 | 9000 | inf | 551.21 | 0.000551 |
| after | 1048576 | 9000 | inf | 615.54 | 0.000616 |
----------------------------------------------------------------------------------------
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Function rxe_rcv is used internally in RXE and don't need to be
exported. This patch removes such export declaration.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids RNR NAK timer and retransmit timer initialization and
cleanup for non RC QPs (such as UD QP, GSI QP).
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Expose new counters using the get_hw_stats callback.
We expose the following counters:
+---------------------+----------------------------------------+
| Name | Description |
|---------------------+----------------------------------------|
|sent_pkts | number of sent pkts |
|---------------------+----------------------------------------|
|rcvd_pkts | number of received packets |
|---------------------+----------------------------------------|
|out_of_sequence | number of errors due to packet |
| | transport sequence number |
|---------------------+----------------------------------------|
|duplicate_request | number of received duplicated packets. |
| | A request that previously executed is |
| | named duplicated. |
|---------------------+----------------------------------------|
|rcvd_rnr_err | number of received RNR by completer |
|---------------------+----------------------------------------|
|send_rnr_err | number of sent RNR by responder |
|---------------------+----------------------------------------|
|rcvd_seq_err | number of out of sequence packets |
| | received |
|---------------------+----------------------------------------|
|ack_deffered | number of deferred handling of ack |
| | packets. |
|---------------------+----------------------------------------|
|retry_exceeded_err | number of times retry exceeded |
|---------------------+----------------------------------------|
|completer_retry_err | number of times completer decided to |
| | retry |
|---------------------+----------------------------------------|
|send_err | number of failed send packet |
+---------------------+----------------------------------------+
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The synchronize_rcu() call can be eliminated to improve memory deregistration
performance.
There are two key fields involved:
- The rcu pointer itself
- the lkey_published field
To close the window between the rcu read of the mregion pointer and the
reference count the code should:
1. To lkey/rkey validation (reader)
Read the rcu pointer. If the pointer is non-NULL, get a reference.
To the current validation tests use a READ_ONCE() on the lkey_published.
Upon any failure release the reference.
2. To the remove logic (delete)
Insure the published is zeroed prior to setting the pointer to NULL.
This requires using rcu_assign_pointer() to insure lkey_published
is written prior to the NULL.
3. To the insert logic (add)
Insure the published is set use an rcu_assign_pointer() to insure the
pointer is after all MR fields.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The wqe should be read only and in fact the superfluous reset of the
RVT_SEND_RESERVE_USED flag causes an issue where reserved operations
elicit a bad completion to the ULP.
The maintenance of the flag is now entirely within rvt_post_one_wr()
where a reserved operation will set the flag and a non-reserved operation
will insure the operation that is about to be posted has the flag reset.
Fixes: Commit 856cc4c237 ("IB/hfi1: Add the capability for reserved operations")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RC timeout counter isn't getting incremented.
Increment counter and add the trace for it.
Fixes: 87c23b4ab018 ("IB/rdmavt: Adding timer logic to rdmavt")
Reviewed-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The following fields are defined for filtering and triggering:
- wr_id
- status
- opcode
- qpn
- length
- idx
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This fix is to get additional debugging information.
The following fields are added:
- wqe
- qpt
- num_sge
- ssn
- pid
- send_flags
These additional fields provide for more focused filtering
and triggering.
The patch also moves the trace to just before the wqe is
posted to get the most accurate information and future proofs
the code to trace all possible reserved opcodes.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The work to create a completion helper moved the translation of send
wqe operations to completion opcodes to rdmvat.
This precludes having driver dependent operations. Make the translation
driver dependent by doing the translation in the driver prior to the
rvt_qp_swqe_complete() call using restored translation tables.
Fixes: Commit f2dc9cdce8 ("IB/rdmavt: Add a send completion helper")
Fixes: Commit 0771da5a6e ("IB/hfi1,IB/qib: Use new send completion helper")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to C9-147, MSN should only be incremented when the last packet of
a multi packet request has been received.
"Logically, the requester associates a sequential Send Sequence Number
(SSN) with each WQE posted to the send queue. The SSN bears a one-
to-one relationship to the MSN returned by the responder in each re-
sponse packet. Therefore, when the requester receives a response, it in-
terprets the MSN as representing the SSN of the most recent request
completed by the responder to determine which send WQE(s) can be
completed."
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All Soft-RoCE (rxe) is handled now in rdma-core user space library,
so the documentation. The patch below updates the documentation
link to that new location.
Reported-by: Josh Beavers <josh.beavers@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
"goto err;" has it's own kfree_skb() call so it's a double free. We
only need to free on the "goto exit;" path.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When vmalloc_user is used to create memory that is supposed to be mmap'd
to user space, it is necessary for the mmap cookie (eg the offset) to be
aligned to SHMLBA.
This creates a situation where all virtual mappings of the same physical
page share the same virtual cache index and guarantees VIPT coherence.
Otherwise the cache is non-coherent and the kernel will not see writes
by userspace when reading the shared page (or vice-versa).
Reported-by: Josh Beavers <josh.beavers@gmail.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix typos and add the following to the scripts/spelling.txt:
therfore||therefore
Besides, tidy up comment blocks for 80-col wrapping.
Link: http://lkml.kernel.org/r/1481573103-11329-31-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes
it was possible to remove the IB DMA mapping code entirely and
switch the RDMA stack to use the core DMA mapping code. This resulted
in a nice set of cleanups, but touched the entire tree. This branch
will be submitted separately to Linus at the end of the merge window
as per normal practice for tree wide changes like this.
-----BEGIN PGP SIGNATURE-----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=e0Si
-----END PGP SIGNATURE-----
Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
Because the Mellanox code required being based on a net-next tree,
I keept it separate from the remainder of the RDMA stack submission
that is based on 4.10-rc3.
This branch contains:
- Various mlx4 and mlx5 fixes and minor changes
- Support for adding a tag match rule to flow specs
- Support for cvlan offload operation for raw ethernet QPs
- A change to the core IB code to recognize raw eth capabilities and
enumerate them (touches non-Mellanox code)
- Implicit On-Demand Paging memory registration support
-----BEGIN PGP SIGNATURE-----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=rspQ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull Mellanox rdma updates from Doug Ledford:
"Mellanox specific updates for 4.11 merge window
Because the Mellanox code required being based on a net-next tree, I
keept it separate from the remainder of the RDMA stack submission that
is based on 4.10-rc3.
This branch contains:
- Various mlx4 and mlx5 fixes and minor changes
- Support for adding a tag match rule to flow specs
- Support for cvlan offload operation for raw ethernet QPs
- A change to the core IB code to recognize raw eth capabilities and
enumerate them (touches non-Mellanox code)
- Implicit On-Demand Paging memory registration support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (40 commits)
IB/mlx5: Fix configuration of port capabilities
IB/mlx4: Take source GID by index from HW GID table
IB/mlx5: Fix blue flame buffer size calculation
IB/mlx4: Remove unused variable from function declaration
IB: Query ports via the core instead of direct into the driver
IB: Add protocol for USNIC
IB/mlx4: Support raw packet protocol
IB/mlx5: Support raw packet protocol
IB/core: Add raw packet protocol
IB/mlx5: Add implicit MR support
IB/mlx5: Expose MR cache for mlx5_ib
IB/mlx5: Add null_mkey access
IB/umem: Indicate that process is being terminated
IB/umem: Update on demand page (ODP) support
IB/core: Add implicit MR flag
IB/mlx5: Support creation of a WQ with scatter FCS offload
IB/mlx5: Enable QP creation with cvlan offload
IB/mlx5: Enable WQ creation and modification with cvlan offload
IB/mlx5: Expose vlan offloads capabilities
IB/uverbs: Enable QP creation with cvlan offload
...
- Add new Broadcom bnxt_re RoCE driver
- rxe driver updates
- ioctl cleanups
- ETH_P_IBOE declaration cleanup
- IPoIB changes
- Add port state cache
- Allow srpt driver to accept guids as port names in config
- Update to hfi1 driver
- Update to srp driver
- Lots of misc. minor changes all over
-----BEGIN PGP SIGNATURE-----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=ugNm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"First set of updates for 4.11 kernel merge window
- Add new Broadcom bnxt_re RoCE driver
- rxe driver updates
- ioctl cleanups
- ETH_P_IBOE declaration cleanup
- IPoIB changes
- Add port state cache
- Allow srpt driver to accept guids as port names in config
- Update to hfi1 driver
- Update to srp driver
- Lots of misc minor changes all over"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (114 commits)
RDMA/bnxt_re: fix for "bnxt_en: Update to firmware interface spec 1.7.0."
rdma_cm: fail iwarp accepts w/o connection params
IB/srp: Drain the send queue before destroying a QP
IB/core: Add support for draining IB_POLL_DIRECT completion queues
IB/srp: Improve an error path
IB/srp: Make a diagnostic message more informative
IB/srp: Document locking conventions
IB/srp: Fix race conditions related to task management
IB/srp: Avoid that duplicate responses trigger a kernel bug
IB/SRP: Avoid using IB_MR_TYPE_SG_GAPS
RDMA/qedr: Fix some error handling
RDMA/bnxt_re: add DCB dependency
IB/hns: include linux/module.h
IB/vmw_pvrdma: Expose vendor error to ULPs
vmw_pvrdma: switch to pci_alloc_irq_vectors
IB/hfi1: use size_t for passing array length
IB/ipoib: Remove redudant label
IB/ipoib: remove the unnecessary memory free
IB/mthca: switch to pci_alloc_irq_vectors
IB/hfi1: Code reuse with memdup_copy
...
Rename RVT AETH defines and export in rdma/ib_hdrs.h
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Return usec from an index into ib_rvt_rnr_table.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Convert copy_sge and related SGE state functions to use boolean.
For determining if QP is in user mode, add helper function in rdmavt_qp.h.
This is used to determine if QP needs the last byte ordering.
While here, change rvt_pd.user to a boolean.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To move common code across target to rdmavt for code reuse.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add rvt_compute_aeth() and rvt_get_credit() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add rvt_rc_error() and rvt_comm_est() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Having per-CPU reference count for each MR prevents
cache-line bouncing across the system. Thus, it
prevents bottlenecks. Use per-CPU reference counts
per MR.
The per-CPU reference count for FMRs is used in
atomic mode to allow accurate testing of the busy
state. Other MR types run in per-CPU mode MR until
they're freed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use setup_timer function instead of initializing timer with the function
and data fields.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change the drivers to call ib_query_port in their get port
immutable handler instead of their own query port handler.
Doing this required to set the core cap flags of this device
before the ib_query_port call is made, since the IB core might
need these caps to serve the port query.
Drivers are ensured by the IB core that the port attributes passed
to the port query verb implementation are zero, and hence we
removed the zeroing from the drivers.
This patch doesn't add any new functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the range check to avoid integer-overflow in edge case.
Resolves CVE 2016-8636.
Signed-off-by: Eyal Itkin <eyal.itkin@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the response's resid field when larger than MTU, instead of only
updating the local resid variable.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Eyal Itkin <eyal.itkin@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch makes use of is_vlan_dev() function instead of flag
comparison which is exactly done by is_vlan_dev() helper function.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jon Maxwell <jmaxwell37@gmail.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On UD QP completer tasklet is scheduled for each packet sent.
If it is followed by a destroy_qp(), the kernel panic will
happen as the completer tries to operate on a destroyed QP.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The first argument of list_add_tail is the new item and the second
is the head of the list. Fix the code to pass arguments in the
right order, otherwise not all the rxe devices will be removed
during teardown.
Fixes: 8700e3e7c4 ('Soft RoCE driver')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Make the rxe and rdmavt drivers use dma_virt_ops. Update the
comments that refer to the source files removed by this patch.
Remove struct ib_dma_mapping_ops. Remove ib_device.dma_ops.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Andrew Boyer <andrew.boyer@dell.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Prepare for removal of ib_device.dma_device.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Additionally, make it easier to detect skb leaks by issuing a warning
if a leak occurs.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Cc: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Neither rxe->ifc_ops nor any of the function pointers in struct
struct rxe_ifc_ops ever change. Hence remove the rxe->ifc_ops
indirection mechanism.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that calling check_rkey() for mem->state == RXE_MEM_STATE_FREE
triggers an MR reference leak.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change do_complete() such that an error completion is not only
generated if a QP is in the error state but also if a work request
failed.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This change makes the code easier to read and avoids that code is
duplicated.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since index values equal to or above 'range' can trigger memory
corruption, complain if index >= range.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It is strongly recommended to report kernel warnings once instead
of every time a condition is hit. Hence change WARN_ON() into
WARN_ON_ONCE() / BUILD_BUG_ON() as appropriate.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change the argument type of these functions from void * into
struct rxe_pool_entry *.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Let the compiler check the type of the arguments passed to SKB_TO_PKT()
and PKT_TO_SKB().
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Casting a pointer to 'void *' explicitly is not necessary in C code.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The variable 'av' is not used so remove it. Since that change
removes the last user of the 'wqe' argument, remove that argument
too.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that sparse complains about using 0 as a pointer, about
missing function declarations and also avoid that sparse complains
about endianness.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Series of qedr fixes
- Series of rxe fixes
- One isolated i40iw fix
- One isolated cma fix
- One isolated cxgb4 fix
-----BEGIN PGP SIGNATURE-----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=NW9g
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"First round of -rc fixes for 4.10 kernel:
- a series of qedr fixes
- a series of rxe fixes
- one i40iw fix
- one cma fix
- one cxgb4 fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/rxe: Don't check for null ptr in send()
IB/rxe: Drop future atomic/read packets rather than retrying
IB/rxe: Use BTH_PSN_MASK when ACKing duplicate sends
qedr: Always notify the verb consumer of flushed CQEs
qedr: clear the vendor error field in the work completion
qedr: post_send/recv according to QP state
qedr: ignore inline flag in read verbs
qedr: modify QP state to error when destroying it
qedr: return correct value on modify qp
qedr: return error if destroy CQ failed
qedr: configure the number of CQEs on CQ creation
i40iw: Set 128B as the only supported RQ WQE size
IB/cma: Fix a race condition in iboe_addr_get_sgid()
IB/rxe: Fix a memory leak in rxe_qp_cleanup()
iw_cxgb4: set correct FetchBurstMax for QPs
pkt->qp was already dereferenced earlier in the function.
Fixes Smatch complaint:
drivers/infiniband/sw/rxe/rxe_net.c:458 send()
warn: variable dereferenced before check 'pkt->qp' (see line 441)
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the completer is in the middle of a large read operation, one
lost packet can cause havoc. Going to COMPST_ERROR_RETRY will
cause the requester to resend the request. After that, any packet
from the first attempt still in the receive queue will be
interpreted as an error, restarting the error/retry sequence.
The transfer will quickly exhaust its retries.
This behavior is very noticeable when doing 512KB reads on a
QEMU system configured with 1500B MTU.
Also, a resent request here will prompt the responder on the
other side to immediately start resending, but the resent
packets will get stuck in the already-loaded receive queue and
will never be processed.
Rather than erroring out every time an unexpected future packet
arrives, just drop it. Eventually the retry timer will send a
duplicate request; the completer will be able to make progress since
the queue will start relatively empty.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A socket is associated with every QP by the rxe driver but sock_release()
is never called. Add a call to sock_release() in rxe_qp_cleanup().
Fixes: commit 8700e3e7c48A5 ("Add Soft RoCE driver")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Moni Shoua <monis@mellanox.com>
Cc: Kamal Heib <kamalh@mellanox.com>
Cc: Amir Vadai <amirv@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Get rid of this warning:
drivers/infiniband/sw/rdmavt/cq.c: In function ‘rvt_cq_exit’:
drivers/infiniband/sw/rdmavt/cq.c:542:2: warning: ‘worker’ may be used uninitialized in this function [-Wmaybe-uninitialized]
kthread_destroy_worker(worker);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
by fixing the function to actually work.
Fixes: 6efaf10f16 ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker")
Cc: Petr Mladek <pmladek@suse.com>
Cc: Doug Ledford <dledford@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Shared mlx5 updates with net stack (will drop out on merge if Dave's
tree has already been merged)
- Driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe
- Debug cleanups
- New connection rejection helpers
- SRP updates
- Various misc fixes
- New paravirt driver from vmware
-----BEGIN PGP SIGNATURE-----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=QeGy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"This is the complete update for the rdma stack for this release cycle.
Most of it is typical driver and core updates, but there is the
entirely new VMWare pvrdma driver. You may have noticed that there
were changes in DaveM's pull request to the bnxt Ethernet driver to
support a RoCE RDMA driver. The bnxt_re driver was tentatively set to
be pulled in this release cycle, but it simply wasn't ready in time
and was dropped (a few review comments still to address, and some
multi-arch build issues like prefetch() not working across all
arches).
Summary:
- shared mlx5 updates with net stack (will drop out on merge if
Dave's tree has already been merged)
- driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe
- debug cleanups
- new connection rejection helpers
- SRP updates
- various misc fixes
- new paravirt driver from vmware"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits)
IB: Add vmw_pvrdma driver
IB/mlx4: fix improper return value
IB/ocrdma: fix bad initialization
infiniband: nes: return value of skb_linearize should be handled
MAINTAINERS: Update Intel RDMA RNIC driver maintainers
MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers
IB/core: fix unmap_sg argument
qede: fix general protection fault may occur on probe
IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc
mlx5, calc_sq_size(): Make a debug message more informative
mlx5: Remove a set-but-not-used variable
mlx5: Use { } instead of { 0 } to init struct
IB/srp: Make writing the add_target sysfs attr interruptible
IB/srp: Make mapping failures easier to debug
IB/srp: Make login failures easier to debug
IB/srp: Introduce a local variable in srp_add_one()
IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build
IB/multicast: Check ib_find_pkey() return value
IPoIB: Avoid reading an uninitialized member variable
IB/mad: Fix an array index check
...
rvt_create_qp() creates qp->ip only when a qp creation request comes from
userspace (udata is not NULL). If we exceed the number of available
queue pairs however, the error path always attempts to put a kref to this
structure. If the requestor is inside the kernel, this leads to a crash.
We fix this by checking that qp->ip is not NULL before caling kref_put().
Signed-off-by: Jim Foraker <foraker1@llnl.gov>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the new API to create and destroy the cq kthread worker.
The API hides some implementation details.
In particular, kthread_create_worker() allocates and initializes
struct kthread_worker. It runs the kthread the right way and stores
task_struct into the worker structure. In addition, the *on_cpu()
variant binds the kthread to the given cpu and the related memory
node.
kthread_destroy_worker() flushes all pending works, stops
the kthread and frees the structure.
This patch does not change the existing behavior. Note that we must
use the on_cpu() variant because the function starts the kthread
and it must bind it to the right CPU before waking. The numa node
is associated for given CPU as well.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The memory barrier is not enough to protect queuing works into
a destroyed cq kthread. Just imagine the following situation:
CPU1 CPU2
rvt_cq_enter()
worker = cq->rdi->worker;
rvt_cq_exit()
rdi->worker = NULL;
smp_wmb();
kthread_flush_worker(worker);
kthread_stop(worker->task);
kfree(worker);
// nothing queued yet =>
// nothing flushed and
// happily stopped and freed
if (likely(worker)) {
// true => read before CPU2 acted
cq->notify = RVT_CQ_NONE;
cq->triggered++;
kthread_queue_work(worker, &cq->comptask);
BANG: worker has been flushed/stopped/freed in the meantime.
This patch solves this by protecting the critical sections by
rdi->n_cqs_lock. It seems that this lock is not much contended
and looks reasonable for this purpose.
One catch is that rvt_cq_enter() might be called from IRQ context.
Therefore we must always take the lock with IRQs disabled to avoid
a possible deadlock.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add struct ib_udata to the signature of create_ah callback that is
implemented by IB device drivers. This allows HW drivers to return extra
data to the userspace library.
This patch prepares the ground for mlx5 driver to resolve destination
mac address for a given GID and return it to userspace.
This patch was previously submitted by Knut Omang as a part of the
patch set to support Oracle's Infiniband HCA (SIF).
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Increase limit of max CQE from 8K to 32K to allow demanding
applications to work over SoftRoCE with same configuration
as most RoCEv2 HW vendors have.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It might be possible for all of a QP's references to be dropped
while one of that QP's tasklets is running.
For example, the completer might run during QP destroy.
If qp->valid is false, it will drop all of the packets on
the resp_pkts list, potentially removing the last reference.
Then it tries to advance the SQ consumer pointer. If the
SQ's buffer has already been destroyed, the system will
panic.
To be safe, hold a reference on the QP for the duration
of each tasklet.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The system may crash when a malformed request is received and
the error is detected by the responder.
NodeA: $ ibv_rc_pingpong -g 0 -d rxe0 -i 1 -n 1 -s 50000
NodeB: $ ibv_rc_pingpong -g 0 -d rxe0 -i 1 -n 1 -s 1024 <NodeA_ip>
The responder generates a receive error on node B since the incoming
SEND is oversized. If the client tears down the QP before the responder
or the completer finish running, a page fault may occur.
The fix makes the destroy operation spin until the tasks complete, which
appears to be original intent of the design.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The udata->inlen error path needs to clean up the ref
added by rxe_alloc().
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Peek at the CQ after arming it so that we can return a hint.
This avoids missed completions due to a race between posting
CQEs and arming the CQ.
For example, CM teardown waits on MAD requests to complete with
ib_cq_poll_work(). Without this fix, the last completion might be
left on the CQ, hanging the kthread doing the teardown.
The console backtraces look like this:
[ 4199.911284] Call Trace:
[ 4199.911401] [<ffffffff9657fe95>] schedule+0x35/0x80
[ 4199.911556] [<ffffffff965830df>] schedule_timeout+0x22f/0x2c0
[ 4199.911727] [<ffffffff9657f7a8>] ? __schedule+0x368/0xa20
[ 4199.911891] [<ffffffff96580903>] wait_for_completion+0xb3/0x130
[ 4199.912067] [<ffffffff960a17e0>] ? wake_up_q+0x70/0x70
[ 4199.912243] [<ffffffffc074a06d>] cm_destroy_id+0x13d/0x450 [ib_cm]
[ 4199.912422] [<ffffffff961615d5>] ? printk+0x57/0x73
[ 4199.912578] [<ffffffffc074a390>] ib_destroy_cm_id+0x10/0x20 [ib_cm]
[ 4199.912759] [<ffffffffc076098c>] rdma_destroy_id+0xac/0x340 [rdma_cm]
[ 4199.912941] [<ffffffffc076f2cc>] 0xffffffffc076f2cc
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The last_psn algorithm fails in the zero-byte case: it calculates
first_psn = N, last_psn = N-1. This makes the operation unretryable since
the res structure will fail the (first_psn <= psn <= last_psn) test in
find_resource().
While here, use BTH_PSN_MASK to mask the calculated last_psn.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
skb_out is decremented in rxe_skb_tx_dtor(), which is not called in the
loopback() path. Move the increment to the send() path rather than
rxe_xmit_packet().
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A client might post a read followed by a send. The partner receives
and acknowledges both transactions, posting an RCQ entry for the
send, but something goes wrong with the read ACK. When the client
retries the read, the partner's responder processes the duplicate
read but incorrectly resets the PSN to the value preceding the
original send. When the duplicate send arrives, the responder cannot
tell that it is a duplicate, so the responder generates a duplicate
RCQ entry, confusing the client.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A simple userspace application might poll the CQ, find a completion,
and then attempt to post a new WQE to the SQ. A spurious error can
occur if the userspace application detects a full SQ in the instant
before the kernel is able to advance the SQ consumer pointer.
This is noticeable when using single-entry SQs with ibv_rc_pingpong
if lots of kernel and userspace library debugging is enabled.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid smashing the stack when an ICRC error occurs on an IPv6 network.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It makes me nervous when we cast pointer parameters. I would estimate
that around 50% of the time, it indicates a bug. Here the cast is not
needed becaue u32 and and unsigned int are the same thing. Removing the
cast makes the code more robust and future proof in case any of the
types change.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanosky <leonro@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A race condition fix added an rxe_qp structure to the stack in order
to be able to perform rollback in rxe_requester(), but the structure
is large enough to trigger the warning for possible stack overflow:
drivers/infiniband/sw/rxe/rxe_req.c: In function 'rxe_requester':
drivers/infiniband/sw/rxe/rxe_req.c:757:1: error: the frame size of 2064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This changes the rollback function to only save the psn inside
the qp, which is the only field we access in the rollback_qp
anyway.
Fixes: 3050b99850 ("IB/rxe: Fix race condition between requester and completer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is for use by client drivers to drive
send completions into a CQ.
A new exported table allows for the mapping
of ib_wr_opcode into a ib_wc_opcode.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some parts of the code don't use the standard driver
wrapper for memory region reference counters. Use the
standard driver wrapper throughout the code.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some parts of the code don't use the standard release
wrapper rvt_put_qp() for decrementing and testing
the refcount to then try to use a resource.
Replace this code with the standard driver wrapper.
Fixes: Commit 4d6f85c3fa ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Split rdmavt traces into separate files to preserve the original
hierarchy since only one trace sub system may now be defined per header
file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The prints after [k|v][m|z|c]alloc() functions are not needed,
because in case of failure, allocator will print their internal
error prints anyway.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The method rxe_qp_error() transitions QP to error state
and make sure the QP is drained. It did not though update
the QP state for user's query.
This patch fixes this.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RXE resets the send-q only once in rxe_qp_init_req() when
QP is created, but when the QP is reused after QP reset, the send-q
holds previous garbage data.
This garbage data wrongly fails CQEs that otherwise
should have completed successfully.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To correctly handle a erroneous WR this fix does the following
1. Make sure the bad WQE causes a user completion event.
2. Call rxe_completer to handle the erred WQE.
Before the fix, when rxe_requester found a bad WQE, it changed its
status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs.
If this was the 1st WQE then there would be no ACK to invoke the
completer and this bad WQE would be stuck in the QP's send-q.
On top of that the requester exiting with 0 caused rxe_do_task to
endlessly invoke rxe_requester, resulting in a soft-lockup attached
below.
In case the WQE was not the 1st and rxe_completer did get a chance to
handle the bad WQE, it did not cause a complete event since the WQE's
IB_SEND_SIGNALED flag was not set.
Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec
version 1.2.1, section 10.7.3.1 Signaled Completions.
NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s!
[<ffffffffa0590145>] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe]
[<ffffffffa05952ec>] lookup_mem+0x3c/0xc0 [rdma_rxe]
[<ffffffffa0595534>] copy_data+0x1c4/0x230 [rdma_rxe]
[<ffffffffa058c180>] rxe_requester+0x9d0/0x1100 [rdma_rxe]
[<ffffffff8158e98a>] ? kfree_skbmem+0x5a/0x60
[<ffffffffa05962c9>] rxe_do_task+0x89/0xf0 [rdma_rxe]
[<ffffffffa05963e2>] rxe_run_task+0x12/0x30 [rdma_rxe]
[<ffffffffa059110a>] rxe_post_send+0x41a/0x550 [rdma_rxe]
[<ffffffff811ef922>] ? __kmalloc+0x182/0x200
[<ffffffff816ba512>] ? down_read+0x12/0x40
[<ffffffffa054bd32>] ib_uverbs_post_send+0x532/0x540 [ib_uverbs]
[<ffffffff815f8722>] ? tcp_sendmsg+0x402/0xb80
[<ffffffffa05453dc>] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs]
[<ffffffff81623c2e>] ? inet_recvmsg+0x7e/0xb0
[<ffffffff8158764d>] ? sock_recvmsg+0x3d/0x50
[<ffffffff81215b87>] __vfs_write+0x37/0x140
[<ffffffff81216892>] vfs_write+0xb2/0x1b0
[<ffffffff81217ce5>] SyS_write+0x55/0xc0
[<ffffffff816bc672>] entry_SYSCALL_64_fastpath+0x1a/0xa
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Profiling shows that the key validation is susceptible
to cache line trading when accessing the lkey table.
Fix by separating out the read mostly fields from the write
fields. In addition the shift amount, which is function
of the lkey table size, is precomputed and stored with the
table pointer. Since both the shift and table pointer
are in the same read mostly cacheline, this saves a cache
line in this hot path.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The initial code for rdmavt carried with it a restriction that was a
vestige from the qib driver, that to dma map a page it had to be less
than a page size. This is not the case on modern hardware, both qib and
hfi1 will be just fine with unaligned map requests.
This fixes a 4.8 regression where by an IPoIB transfer of > PAGE_SIZE
will hang because the dma map page call always fails. This was
introduced after commit 5faba54695 ("IB/ipoib: Report SG feature
regardless of HW UD CSUM capability") added the capability to use SG by
default. Rather than override this, the HW supports it, so allow SG.
Cc: Stable <stable@vger.kernel.org> # 4.8
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A good practice is to prefix the names of functions by the name
of the subsystem.
The kthread worker API is a mix of classic kthreads and workqueues. Each
worker has a dedicated kthread. It runs a generic function that process
queued works. It is implemented as part of the kthread subsystem.
This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:
__init_kthread_worker() -> __kthread_init_worker()
init_kthread_worker() -> kthread_init_worker()
init_kthread_work() -> kthread_init_work()
insert_kthread_work() -> kthread_insert_work()
queue_kthread_work() -> kthread_queue_work()
flush_kthread_work() -> kthread_flush_work()
flush_kthread_worker() -> kthread_flush_worker()
Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.
Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:
+ "init" in the function names stands for the verb "initialize"
aka "initialize worker". While "INIT" in the macro names
stands for the noun "INITIALIZER" aka "worker initializer".
+ INIT() macros are used only in DEFINE() macros
+ init() functions are used close to the other kthread()
functions. It looks much better if all the functions
use the same scheme.
+ There will be also kthread_destroy_worker() that will
be used close to kthread_cancel_work(). It is related
to the init() function. Again it looks better if all
functions use the same naming scheme.
+ there are several precedents for such init() function
names, e.g. amd_iommu_init_device(), free_area_init_node(),
jump_label_init_type(), regmap_init_mmio_clk(),
+ It is not an argument but it was inconsistent even before.
[arnd@arndb.de: fix linux-next merge conflict]
Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. Debugging qp state transitions and qp errors in loopback and
multiple QP tests is difficult without qp numbers in debug logs.
This patch adds qp number to important debug logs.
2. Instead of having rxe: prefix in few logs and not having in
few logs, using uniform module name prefix using pr_fmt macro.
3. Code cleanup for various warnings reported by checkpatch for
incomplete unsigned data type, line over 80 characters, return
statements.
Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a problem when CONFIG_RDMA_RXE=y and CONFIG_IPV6=y. This
results in the rdma_rxe initialization occurring before the IPv6
services are ready. This patch delays the initialization of rdma_rxe
until after the IPv6 services are ready. This fix is based on one
proposed by Logan Gunthorpe on a much older code base.
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch fixes below kernel crash on memory registration for rxe
and other transport drivers which has dma_ops extension.
IB/core invokes ib_map_sg_attrs() in generic manner with dma attributes
which is used by mlx5 and mthca adapters. However in doing so it
ignored honoring dma_ops extension of software based transports for
sg map/unmap operation. This results in calling dma_map_sg_attrs of
hardware virtual device resulting in crash for null reference.
We extend the core to support sg_map/unmap_attrs and transport drivers
to implement those dma_ops callback functions.
Verified usign perftest applications.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81032a75>] check_addr+0x35/0x60
...
Call Trace:
[<ffffffff81032b39>] ? nommu_map_sg+0x99/0xd0
[<ffffffffa02b31c6>] ib_umem_get+0x3d6/0x470 [ib_core]
[<ffffffffa01cc329>] rxe_mem_init_user+0x49/0x270 [rdma_rxe]
[<ffffffffa01c793a>] ? rxe_add_index+0xca/0x100 [rdma_rxe]
[<ffffffffa01c995f>] rxe_reg_user_mr+0x9f/0x130 [rdma_rxe]
[<ffffffffa00419fe>] ib_uverbs_reg_mr+0x14e/0x2c0 [ib_uverbs]
[<ffffffffa003d3ab>] ib_uverbs_write+0x15b/0x3b0 [ib_uverbs]
[<ffffffff811e92a6>] ? mem_cgroup_commit_charge+0x76/0xe0
[<ffffffff811af0a9>] ? page_add_new_anon_rmap+0x89/0xc0
[<ffffffff8117e6c9>] ? lru_cache_add_active_or_unevictable+0x39/0xc0
[<ffffffff811f0da8>] __vfs_write+0x28/0x120
[<ffffffff811f1239>] ? rw_verify_area+0x49/0xb0
[<ffffffff811f1492>] vfs_write+0xb2/0x1b0
[<ffffffff811f27d6>] SyS_write+0x46/0xa0
[<ffffffff814f7d32>] entry_SYSCALL_64_fastpath+0x1a/0xa4
Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Both prepare4 and prepare6 sets loopback mask in pkt_info structure
instance of skb. The xmit_packet and other requester side functions
use a pkt_info struct from the stack without the proper mask. This
results in sending out the packet to the actual netdev device and
loopback functionality is broken.
Modify prepare() to pass its correctly marked pkt_info struct to
prepare4() and prepare6() instead of them using SKB_TO_PKT(skb) and
getting an incorrectly set mask.
Verified with perftest applications.
Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids scheduing tasklet for WQE and protocol processing
for user space QP. It performs the task in calling process context.
To improve code readability kernel specific post_send handling moved to
post_send_kernel() function.
Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Corrected function name in comment from qib_ to rvt_.
Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds lockdep asserts in key code paths for
insuring lock correctness.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add an rvt_qp_init() to initialize specific
common fields as the qp is created or reset.
The routine is shared by the rvt_reset_qp() and
the rvt_create_qp().
The intent is that lock dep assertions will only
appear in the rvt_reset_qp().
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The reset calldown is misplaced.
It should only be called in the code that actually
transitions the QP to reset.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The __must_hold() is sufficent to correct the sparse
context imbalance inside a function.
Per Documentation/sparse.txt:
__must_hold - The specified lock is held on function entry and exit.
Fixes: Commit c0a67f6ba3 ("IB/rdmavt: Annotate rvt_reset_qp()")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This improves readability and hides the reference count
mechanism from the client drivers.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The userspace memory region 'mr' is allocated with kzalloc in
__rvt_alloc_mr however it is incorrectly being freed with vfree in
__rvt_free_mr. Fix this by using kfree to free it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rxe_requester() is sending a pkt with rxe_xmit_packet() and
then calls rxe_update() to update the wqe and qp's psn values.
But sometimes the response is received before the requester
had time to update the wqe in which case the completer
acts on errornous wqe values.
This fix updates the wqe and qp before actually sending
the request and rolls back when xmit fails.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When handling ack for atomic opcodes like "fetch&add"
or "cmp&swp", the method send_atomic_ack() saves the ack
before sending it, in case it gets lost and never reach the
requester. In which case the method duplicate_request()
will need to find it using the duplicated request.psn.
But send_atomic_ack() used a wrong psn value and thus
the above ack was never found.
This fix uses the ack.psn to locate the ack in case
its needed.
This fix also copies the ack packet to the skb's control buffer
since duplicate_request() will need it when calling rxe_xmit_packet()
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is skb_clone(skb, GFP_KERNEL) in spinlock context
in rxe_rcv_mcast_pkt().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The unwind logic for creating a user QP has a double vfree
of the non-shared receive queue when handling a "too many qps"
failure.
The code unwinds the mmmap info by decrementing a reference
count which will call rvt_release_mmap_info() which in turn
does the vfree() of the r_rq.wq. The unwind code then does
the same free.
Fix by guarding the vfree() with the same test that is done
in close and only do the vfree() if qp->ip is NULL.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- hfi1 driver updates
- Fix for max SGEs allowed via RDMA R/W API
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cQcp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull second round of rdma updates from Doug Ledford:
"This can be split out into just two categories:
- fixes to the RDMA R/W API in regards to SG list length limits
(about 5 patches)
- fixes/features for the Intel hfi1 driver (everything else)
The hfi1 driver is still being brought to full feature support by
Intel, and they have a lot of people working on it, so that amounts to
almost the entirety of this pull request"
* tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (84 commits)
IB/hfi1: Add cache evict LRU list
IB/hfi1: Fix memory leak during unexpected shutdown
IB/hfi1: Remove unneeded mm argument in remove function
IB/hfi1: Consistently call ops->remove outside spinlock
IB/hfi1: Use evict mmu rb operation
IB/hfi1: Add evict operation to the mmu rb handler
IB/hfi1: Fix TID caching actions
IB/hfi1: Make the cache handler own its rb tree root
IB/hfi1: Make use of mm consistent
IB/hfi1: Fix user SDMA racy user request claim
IB/hfi1: Fix error condition that needs to clean up
IB/hfi1: Release node on insert failure
IB/hfi1: Validate SDMA user iovector count
IB/hfi1: Validate SDMA user request index
IB/hfi1: Use the same capability state for all shared contexts
IB/hfi1: Prevent null pointer dereference
IB/hfi1: Rename TID mmu_rb_* functions
IB/hfi1: Remove unneeded empty check in hfi1_mmu_rb_unregister()
IB/hfi1: Restructure hfi1_file_open
IB/hfi1: Make iovec loop index easy to understand
...
- Updates/fixes for iw_cxgb4 driver
- Updates/fixes for mlx5 driver
- Add flow steering and RSS API
- Add hardware stats to mlx4 and mlx5 drivers
- Add firmware version API for RDMA driver use
- Add the rxe driver (this is a software RoCE driver that makes any
Ethernet device a RoCE device)
- Fixes for i40iw driver
- Support for send only multicast joins in the cma layer
- Other minor fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oZOO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull base rdma updates from Doug Ledford:
"Round one of 4.8 code: while this is mostly normal, there is a new
driver in here (the driver was hosted outside the kernel for several
years and is actually a fairly mature and well coded driver). It
amounts to 13,000 of the 16,000 lines of added code in here.
Summary:
- Updates/fixes for iw_cxgb4 driver
- Updates/fixes for mlx5 driver
- Add flow steering and RSS API
- Add hardware stats to mlx4 and mlx5 drivers
- Add firmware version API for RDMA driver use
- Add the rxe driver (this is a software RoCE driver that makes any
Ethernet device a RoCE device)
- Fixes for i40iw driver
- Support for send only multicast joins in the cma layer
- Other minor fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (72 commits)
Soft RoCE driver
IB/core: Support for CMA multicast join flags
IB/sa: Add cached attribute containing SM information to SA port
IB/uverbs: Fix race between uverbs_close and remove_one
IB/mthca: Clean up error unwind flow in mthca_reset()
IB/mthca: NULL arg to pci_dev_put is OK
IB/hfi1: NULL arg to sc_return_credits is OK
IB/mlx4: Add diagnostic hardware counters
net/mlx4: Query performance and diagnostics counters
net/mlx4: Add diagnostic counters capability bit
Use smaller 512 byte messages for portmapper messages
IB/ipoib: Report SG feature regardless of HW UD CSUM capability
IB/mlx4: Don't use GFP_ATOMIC for CQ resize struct
IB/hfi1: Disable by default
IB/rdmavt: Disable by default
IB/mlx5: Fix port counter ID association to QP offset
IB/mlx5: Fix iteration overrun in GSI qps
i40iw: Add NULL check for puda buffer
i40iw: Change dup_ack_thresh to u8
i40iw: Remove unnecessary check for moving CQ head
...
Soft RoCE (RXE) - The software RoCE driver
ib_rxe implements the RDMA transport and registers to the RDMA core
device as a kernel verbs provider. It also implements the packet IO
layer. On the other hand ib_rxe registers to the Linux netdev stack
as a udp encapsulating protocol, in that case RDMA, for sending and
receiving packets over any Ethernet device. This yields a RDMA
transport over the UDP/Ethernet network layer forming a RoCEv2
compatible device.
The configuration procedure of the Soft RoCE drivers requires
binding to any existing Ethernet network device. This is done with
/sys interface.
A userspace Soft RoCE library (librxe) provides user applications
the ability to run with Soft RoCE devices. The use of rxe verbs ins
user space requires the inclusion of librxe as a device specifics
plug-in to libibverbs. librxe is packaged separately.
Architecture:
+-----------------------------------------------------------+
| Application |
+-----------------------------------------------------------+
+-----------------------------------+
| libibverbs |
User +-----------------------------------+
+----------------+ +----------------+
| librxe | | HW RoCE lib |
+----------------+ +----------------+
+---------------------------------------------------------------+
+--------------+ +------------+
| Sockets | | RDMA ULP |
+--------------+ +------------+
+--------------+ +---------------------+
| TCP/IP | | ib_core |
+--------------+ +---------------------+
+------------+ +----------------+
Kernel | ib_rxe | | HW RoCE driver |
+------------+ +----------------+
+------------------------------------+
| NIC driver |
+------------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------------------------------------+
| Application |
+-----------------------------------------------------------+
+-----------------------------------+
| libibverbs |
User +-----------------------------------+
+----------------+ +----------------+
| librxe | | HW RoCE lib |
+----------------+ +----------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+--------------+ +------------+
| Sockets | | RDMA ULP |
+--------------+ +------------+
+--------------+ +---------------------+
| TCP/IP | | ib_core |
+--------------+ +---------------------+
+------------+ +----------------+
Kernel | ib_rxe | | HW RoCE driver |
+------------+ +----------------+
+------------------------------------+
| NIC driver |
+------------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Soft RoCE resources:
[1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in
Github
[2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE
Wiki page
[3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a strict policy in the Linux kernel that new drivers must be
disabled by default. Hence leave out the "default m" line from Kconfig.
Fixes: 0194621b22 ("IB/rdmavt: Create module framework and handle driver registration")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Jubin John <jubin.john@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Doug Ledford <dledford@redhat.com>
The use of the specific opcode test is redundant since
all ack entry users correctly manipulate the mr pointer
to selectively trigger the reference clearing.
The overly specific test hinders the use of implementation
specific operations.
The change needs to get rid of the union to insure that
an atomic value is not seen as an MR pointer.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Hanging has been observed while writing a file over NFSoRDMA. Dmesg on
the server contains messages like these:
[ 931.992501] svcrdma: Error -22 posting RDMA_READ
[ 952.076879] svcrdma: Error -22 posting RDMA_READ
[ 982.154127] svcrdma: Error -22 posting RDMA_READ
[ 1012.235884] svcrdma: Error -22 posting RDMA_READ
[ 1042.319194] svcrdma: Error -22 posting RDMA_READ
Here is why:
With the base memory management extension enabled, FRMR is used instead
of FMR. The xprtrdma server issues each RDMA read request as the following
bundle:
(1)IB_WR_REG_MR, signaled;
(2)IB_WR_RDMA_READ, signaled;
(3)IB_WR_LOCAL_INV, signaled & fencing.
These requests are signaled. In order to generate completion, the fast
register work request is processed by the hfi1 send engine after being
posted to the work queue, and the corresponding lkey is not valid until
the request is processed. However, the rdmavt driver validates lkey when
the RDMA read request is posted and thus it fails immediately with error
-EINVAL (-22).
This patch changes the work flow of local operations (fast register and
local invalidate) so that fast register work requests are always
processed immediately to ensure that the corresponding lkey is valid
when subsequent work requests are posted. Local invalidate requests are
processed immediately if fencing is not required and no previous local
invalidate request is pending.
To allow completion generation for signaled local operations that have
been processed before posting to the work queue, an internal send flag
RVT_SEND_COMPLETION_ONLY is added. The hfi1 send engine checks this flag
and only generates completion for such requests.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This fix allows for support of in-kernel reserved operations
without impacting the ULP user.
The low level driver can register a non-zero value which
will be transparently added to the send queue size and hidden
from the ULP in every respect.
ULP post sends will never see a full queue due to a reserved
post send and reserved operations will never exceed that
registered value.
The s_avail will continue to track the ULP swqe availability
and the difference between the reserved value and the reserved
in use will track reserved availabity.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some work requests are local operations, such as IB_WR_REG_MR and
IB_WR_LOCAL_INV. They differ from non-local operations in that:
(1) Local operations can be processed immediately without being posted
to the send queue if neither fencing nor completion generation is needed.
However, to ensure correct ordering, once a local operation is posted to
the work queue due to fencing or completion requiement, all subsequent
local operations must also be posted to the work queue until all the
local operations on the work queue have completed.
(2) Local operations don't send packets over the wire and thus don't
need (and shouldn't update) the packet sequence numbers.
Define a new a flag bit for the post send table to identify local
operations.
Add a new field to the QP structure to track the number of local
operations on the send queue to determine if direct processing of new
local operations should be enabled/disabled.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to support extended memory management, add the mechanism to
invalidate MR keys. This includes a flag "lkey_invalid" in the MR data
structure that is to be checked when validating access to the MR via
the associated key, and two utility functions to perform fast memory
registration and memory key invalidate operations.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This implements the device specific function needed by the verbs
API function ib_map_mr_sg().
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change rvt_post_one_wr to use the new table mechanism for
post send.
Validate that each low level driver specifies the table.
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add flexibility for driver dependent operations in post send
because different drivers will have differing post send
operation support.
This includes data structure definitions to support a table
driven scheme along with the necessary validation routine
using the new table.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The current drivers return errors from this calldown
wrapped in an ERR_PTR().
The rdmavt code incorrectly tests for NULL.
The code is fixed to use IS_ERR() and change ret according
to the driver return value.
Cc: Stable <stable@vger.kernel.org> # 4.6+
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since rvt_reset_qp already zero's out qp->s_ack_queue head and tail
pointers, there is no need to zero out qp->s_ack_queue itself.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Correct calculation of the low order bits which should be unset
based on use of qos_shift parameter when assigning QPN.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Functions required for MODIFY_PORT were incorrectly being
required for MODIFY_QP.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids that sparse reports the following warning:
rdmavt/qp.c:507:17: warning: context imbalance in 'rvt_reset_qp' - unexpected unlock
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdmavt allows the driver to specify the size of the ack queue, but
only uses it for the modify QP limit testing for setting the atomic
limit value.
The driver dependent size is now used to size the s_ack_queue ring
dynamicially.
Since the driver knows its size, the driver will use its define
for any ring size dependent code.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use kzalloc_node instead of kzalloc for rdmavt memory region segment
allocation to optimize for performance on NUMA platforms.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The usage of the various vmalloc APIs do not consistently zero memory
when allocating the swqe. Insure zeroing variants are used.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The priority of the send engines is higher than the CQ completion
thread potentially causing completions to be starved for very
fast interfaces.
Change the CQ kthread to match the send engine threads to minimize
this delay for ULP completion processing.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The awkward coding for setting the allowed_ops field
was tripping an smatch warning.
This patch uses the more appropriate defines from include/rdma
to avoid the issue.
As part of the patch remove a mask that was duplicated
in rdmavt include files and use that mask as appropriate.
Fixes: 8bea6b1cfe6f ("IB/rdmavt: Add create queue pair functionality")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdi->ports has memory allocated in rvt_alloc_device(), but does not get
freed because the hfi1 and qib drivers drivers call ib_dealloc_device()
directly instead of going through rdmavt. Add a rvt_dealloc_device()
that frees rdi->ports and then calls ib_dealloc_device(). Switch hfi1
and qib drivers to calling rvt_dealloc_device() instead of
ib_dealloc_device() directly.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
call_send is used to determine whether to send immediately or schedule
a send for later. The current logic in rdmavt is inverted and has a
negative impact on the latency of the hfi1 and qib drivers. Fix this
regression by correctly calling send immediately when call_send is set.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Accordingly IB Spec post WR to receive queue must
complete with error if QP is in Error state.
Please refer to C10-42, C10-97.2.1
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Tracking user/QP ownership is needed to debug issues with
user ULPs like OpenMPI.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The lkey_table_size driver specific parameter value is used before its
value is sanity checked and restricted to RVT_MAX_LKEY_TABLE_BITS.
This causes a vmalloc allocation failure for large values. Fix this
by moving the value check before the first usage of the value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The new check routine causes a larger than supported frame size
on s390.
Changing the check routine to noinline fixes the issue.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The non-rdamvt versions of qib and hfi1 allow for a differing
heuristic to override a schedule progress in favor of a direct
call the the progress routine.
This patch adds that for both drivers and rdmavt.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove exported functions which are no longer required as the
functionality has moved into rdmavt. This also requires re-ordering some
of the functions since their prototype no longer appears in a header
file. Rather than add forward declarations it is just cleaner to
re-order some of the functions.
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
While hfi1 and qib were still supporting bits and pieces of core verbs
components there needed to be a way to convey if rdmavt should handle
allocation and initialize of resources like the queue pair table. Now
that all of this is moved into rdmavt there is no need for these flags.
They are no longer used in the drivers.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For each verb validate that all requirements for driver callbacks are met.
If a function is called without checking for a valid pointer, it is a
required function. Also document what each callback function does.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add, remove, and otherwise clean up existing comments that are leftover
from the initial code postings of rdmavt. Many of the comments were added
to provide an idea on the direction we were thinking of going. Now that the
design is solidified make a pass over and clean everything up. Also add
details where lacking.
Ensure all non static functions have nano comments.
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
These trace and error print statements would help in debugging issues which
are caused due to messed up QP ring buffer pointers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds an additional lock to reduce contention on the s_lock.
This lock is used in post_send() so that the post_send is not
serialized with the send engine and other send related processing.
To do this the s_next_psn is now maintained on post_send() while
post_send() related fields are moved to a new cache line. There is
an s_avail maintained for the post_send() to mitigate trading cache
lines with the send engine. The lock is released/acquired around
releasing the just built packet to the egress mechanism.
Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A busy_jiffies variable is maintained and updated when rc qps are
created and deleted. busy_jiffies is a scaled value of the number
of rc qps in the device. busy_jiffies is incremented every rc qp
scaling interval. busy_jiffies is added to the rc timeout
in add_retry_timer and mod_retry_timer. The rc qp scaling interval
is selected based on extensive performance evaluation of targeted
workloads.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the new RNR timer for hfi1.
For qib, this timer doesn't exist, so exploit driver
callbacks to use the new timer as appropriate.
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In addition to removing the modify queue pair verb from hfi1 we also
remove ancillary functions which existed only for modify queue pair and
are also already present in hfi1.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Return directly from rvt_resize_cq rather than use a goto/label.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
alloc_qpn must use GFP and the hardware drivers should use it as well.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rvt_query_port calls into the driver through a call back function
query_port_state to populate the rest of ib_port_attr elements.
rvt_modify_port calls into the driver if needed through a call back
function shut_down_port()
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Addin query gid support. Rdmavt still relies on the driver to maintain
the gid table. Rdmavt simply calls into the driver to retrive the guid
for a particular port.
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB core uses 1 relative indexing for ports. All of our data structures
use 0 based indexing. Add an inline function that we can use whenever we
need to validate a legal value and try to convert a port number to a
port index at the entrance into rdmavt.
Try to follow the policy that when we are talking about a port from IB
core point of view we refer to it as a port number. When port is an
index into our arrays refer to it as a port index.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change verbs memory allocations to the device numa node. This keeps memory
close to the device for optimal performance.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some hardware drivers requires additional checks on send WRs. Create an
optional call back to allow hardware drivers to reject a send WR.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fill in srq function stubs with code derived from hfi1 and qib.
Move necessary functions and data structure members as well.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Drivers using rdmavt can rely on rvt_query_qp instead of defining their own
query_qp functions.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update all files added by rdmavt which do not yet have 2016 as the
copyright year.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds mad agent create and free to rdmavt.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds rdmavt device structure allocation in rdamvt. The
ib_device alloc is now done in rdmavt instead of the driver. Drivers
need to tell rdmavt the number of ports when calling.
A side of effect of this patch is fixing a bug with port initialization
where the device structure port array was allocated over top of an
existing one.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Low level drivers need to be able to check incoming attributes as well as be
able to adjust their private data on queue pair modification. Add 2 driver
callbacks, check_modify_qp and modify_qp, to facilitate this.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are a number of minor things that should be set by rdmavt rather
than by the drivers. Now that rdmavt has solidified in its design we can
go ahead and clean up this stuff.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds in the multicast add and remove functions as well as the
ancillary infrastructure needed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the simple post receive verbs call to rdmavt. The actual
interrupt handling and packet processing is still done in the low level
driver.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds in support the qp destroy verb call.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds support of tracing events using the kernels built-in event
tracing infrastructure. This can be extended to provide a wide range of
trace and debug capabilities which have a negligible impact on performance
when enabled. These should be preferred over the use of the rvt_pr*
functions.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add in a post_send and post_one_send to rdmavt. The ULP will provide a WQE
to rdmavt which will then walk and queue each element. Rdmavt will then
queue the work to be done in the driver or kick the driver's progress
routine.
There needs to be a follow on patch which adds in another lock for the
head of the queue so that it can be added to and read from in parallel.
This will touch protocol handlers and require other changes in the
drivers. This will be done separately.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Brings in completion queue functionality. A kthread worker is added to
the rvt_dev_info to serve as a worker for completion queues.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The current code is problematic when the QP creation and ipoib is
used to support NFS and NFS desires to do IO for paging purposes.
In that case, the GFP_KERNEL allocation within create_qp causes
a deadlock in tight memory situations.
This fix adds support to create queue pair with GFP_NOIO flag for
connected mode only to cleanly fail the create queue pair in those
situations.
This was previously fixed in qib but needed to get ported to hfi1.
This patch handles that for both hardwares in the new rdmavt common
layer.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
With this commit, the drivers using rdmavt need not define query_device
function. But they should fill in the IB device attributes structure
rvt_dev_info.dparms.props
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
qib needs to reserve only one qpn for non-verbs stuff. Also fixed the for
loop to reserve the end qpn.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Until all queue pair functionality is moved to rdmavt we need to provide
access to the reset function. This is only temporary and will be reverted
back to a static, non exported function in the end.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding IB user context alloc and dealloc functions to rdmavt so that the
drivers that use rdmavt can use these functions instead of defining their
own functions.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add pkey table in rdi per port data structure. Also bring in related pkey
functions. Drivers will still be responsible for allocating and
maintaining the pkey table. However they need to tell rdmavt where to find
the pkey table. We can not move the pkey table up into rdmavt because
drivers need to manipulate this long before registering with it.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mmap data structure was moved in a previous commit. This patch now
pulls in the related functions.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add table init as well as teardown for handling qpn maps. Drivers can still
provide this functionality by setting the QP_INIT_DRIVER bit.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Until all functionality is moved over to rdmavt drivers still need to
access a number of fields in data structures that are predominantly
meant to be used by rdmavt. Once these rdmavt_<ibta_object>.h header
files are no longer being touched by drivers their content should be
moved to rdmavt/<ibta_object>.h. While here move a couple #defines
over to more general IB verbs header files because they fit better.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Drivers may need to do some work once an address handle has been
created. Add a driver function for this purpose.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Converge the ibport data structures of qib and hfi1 into a common ib
port structure. Also provides a place to keep track of these ports
in case rdmavt needs it. Along with this goes an attach and detach
function for drivers to use to notify rdmavt of the ports.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Original patch is from Kamal Heib <kamalh@mellanox.com>. It has
been split into three separate patches. This one for rdmavt,
a follow on for qib, and one for hfi1.
Create datastructure for address handle and implement the
create/destroy/modify/query of address handle for rdmavt.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trying to print debug and error messages with the rdmavt helpers will not
work out so well if the drivers have not provided the get_card and get
pci functions. Use the normal pr_error instead until we can check this.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the memory registration routines in hfi1 and move them to rdmavt.
A follow on patch will address removing the duplicated code in the
hfi1 and qib drivers.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Follow hfi1's example for printing information about the driver and
incorporate into rdmavt. This requires two new functions to be
provided by the driver, one to get_card_name and one to get_pci_dev.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Drivers are going to need to provide multiple functions for rdmavt to
call in to. We already have one, so go ahead and push this into a
data structure designated for driver supplied functions.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add queue pair data structure as well as supporting structures to rdmavt.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This adds the post sned and recv function stubs.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Create stubs for completion queue creation, polling,
resizing, calling for notification, and destroying.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This adds the get port immutable verbs call.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adds the stub for the mmap verbs call.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This adds the stub for process mad. More study is needed to determine the
final MAD interaction between the driver and rvt.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adds the function stubs for attach and detach multicast.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adds the stubs for create, modify, query, and destory for shared
request queues.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adds the function stubs for allocating, and registering memory regions, as
well as deregistering them.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adds the stubs for create, destroy, modify, and query of the
address handle.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adds the stubs for create, modify, destroy and query functions for queue
pairs.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add the stubs to allocate and deallocate user contexts. This will be
handled completely by rvt.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The handler for query gid operates along the same lines as the query pkey
handler. The driver will take care to keep the guid table updated.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The pkey table will reside in the rvt structure but it will be modified
only when the driver requests then rvt will simply read the value to return
in the query.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the query and modify port stubs. The query will mostly
entail the driver returning everything in the ib_port_attr which will get
handed back to the verbs layer. The modify will need some API helpers in
the driver. The send_trap and post_mad_send are still issues to address.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adds the stubs which will handle the query and modify device functions. At
this time the only intention is to support changing the node desc and the
guid via these calls.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a macro to cut down on writing the same lines over and over again for
what will be a large number of functions that will be supported.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Instead of trying to handle each parameter separately, add ib_device_attr
to rvt_driver_params. This means drivers will fill this in and pass to the
rvt registration function.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add datastructure for and allocation/deallocation of protection domains for
RDMAVT.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds dma functions to rdmavt. The source is hfi1's version of
dma.c which will be removed by a subsequent hfi1 patch.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch introduces the basics for a new module called rdma_vt. This new
driver is a software implementation of the InfiniBand verbs and aims to
replace the multiple implementations that exist and duplicate each others'
code.
While the call to actually register the device with the IB core happens in
rdma_vt, most of the work is still done in the drivers themselves. This
will be changing in a follow on patch this is just laying the groundwork
for this infrastructure.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
