Heiner Kallweit says:
====================
r8169: series with further improvements
I thought I'm more or less done with the basic refactoring. But again
I stumbled across things that can be improved / simplified.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is basically the same as 6e74d1749a ("r8152: replace
get_protocol with vlan_get_protocol"). Use vlan_get_protocol
instead of duplicating the functionality.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Interpreting a member of an u16 array as u32 may result in a misaligned
access. Also it's not really intuitive to define a mac address variable
as array of three u16 words. Therefore use an array of six bytes that
is properly aligned for 32 bit access.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some chips have a non-zero function id, however instead of hardcoding
the id's (CSIAR_FUNC_NIC and CSIAR_FUNC_NIC2) we can get them
dynamically via PCI_FUNC(pci_dev->devfn). This way we can get rid
of the csi_ops.
In general csi is just a fallback mechanism for PCI config space
access in case no native access is supported. Therefore let's
try native access first.
I checked with Realtek regarding the functionality of config space
byte 0x070f and according to them it controls the L0s/L1
entrance latency.
Currently ASPM is disabled in general and therefore this value
isn't used. However we may introduce a whitelist for chips
where ASPM is known to work, therefore let's keep this code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only two places are left where rtl_generic_op() is used, so we can
inline it and simplify the code a little.
This change also avoids the overhead of unlocking/locking in case
the respective operation isn't set.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some longer if statements can be simplified by using switch
statements instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several switch statements can be significantly simplified by using
case ranges.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After merging r810x_pll_power_down/up and r8168_pll_power_down/up we
don't need member pll_power_ops any longer and can drop it, thus
simplifying the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
r810x_pll_power_down/up and r8168_pll_power_down/up have a lot in common,
so we can simplify the code by merging the former into the latter.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The functionality of 810x_phy_power_up/down is covered by the default
clause in 8168_phy_power_up/down. Therefore we don't need these
functions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RTL_GIGA_MAC_VER_23/24 are configured by rtl_hw_start_8168cp_2()
and rtl_hw_start_8168cp_3() respectively which both apply
CPCMD_QUIRK_MASK, thus clearing bit ASF.
Bit ASF isn't set at any other place in the driver, therefore this
check can be removed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix three section mismatches:
1) Section mismatch in reference from the function ioread8() to the
function .init.text:pcibios_init_bridge()
2) Section mismatch in reference from the function free_initmem() to the
function .init.text:map_pages()
3) Section mismatch in reference from the function ccio_ioc_init() to
the function .init.text:count_parisc_driver()
Signed-off-by: Helge Deller <deller@gmx.de>
Fix two section mismatches in drivers.c:
1) Section mismatch in reference from the function alloc_tree_node() to
the function .init.text:create_tree_node().
2) Section mismatch in reference from the function walk_native_bus() to
the function .init.text:alloc_pa_dev().
Signed-off-by: Helge Deller <deller@gmx.de>
Daniel Borkmann says:
====================
Fix two memory leaks in x86 JIT. For details, please see
individual patches in this series. Thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The JIT logic in jit_subprogs() is as follows: for all subprogs we
allocate a bpf_prog_alloc(), populate it (prog->is_func = 1 here),
and pass it to bpf_int_jit_compile(). If a failure occurred during
JIT and prog->jited is not set, then we bail out from attempting to
JIT the whole program, and punt to the interpreter instead. In case
JITing went successful, we fixup BPF call offsets and do another
pass to bpf_int_jit_compile() (extra_pass is true at that point) to
complete JITing calls. Given that requires to pass JIT context around
addrs and jit_data from x86 JIT are freed in the extra_pass in
bpf_int_jit_compile() when calls are involved (if not, they can
be freed immediately). However, if in the original pass, the JIT
image didn't converge then we leak addrs and jit_data since image
itself is NULL, the prog->is_func is set and extra_pass is false
in that case, meaning both will become unreachable and are never
cleaned up, therefore we need to free as well on !image. Only x64
JIT is affected.
Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While reviewing x64 JIT code, I noticed that we leak the prior allocated
JIT image in the case where proglen != oldproglen during the JIT passes.
Prior to the commit e0ee9c1215 ("x86: bpf_jit: fix two bugs in eBPF JIT
compiler") we would just break out of the loop, and using the image as the
JITed prog since it could only shrink in size anyway. After e0ee9c1215,
we would bail out to out_addrs label where we free addrs and jit_data but
not the image coming from bpf_jit_binary_alloc().
Fixes: e0ee9c1215 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ursula Braun says:
====================
net/smc: small features 2018/04/30
here are 4 smc patches for net-next covering small new features
in different areas:
* link health check
* diagnostics for IPv6 smc sockets
* ioctl
* improvement for vlan determination
v2 changes:
* better title
* patch 2 - remove compile problem for disabled CONFIG_IPV6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
An SMC link group is bound to a specific vlan_id. Its link uses
the RoCE-GIDs established for the specific vlan_id. This patch makes
sure the appropriate vlan_id is determined for stacked scenarios like
for instance a master bonding device with vlan devices enslaved.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SIOCINQ returns the amount of unread data in the RMB.
SIOCOUTQ returns the amount of unsent or unacked sent data in the send
buffer.
SIOCOUTQNSD returns the amount of data prepared for sending, but
not yet sent.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update smc_diag.c to support ipv6 addresses on the diagnosis interface.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add periodic LLC testlink support to ensure the link is still active.
The interval time is initialized using the value of
sysctl_tcp_keepalive_time.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The smc_poll code tries to finish connect() if the socket is in
state SMC_INIT and polling of the internal CLC-socket returns with
EPOLLOUT. This makes sense for a select/poll call following a connect
call, but not without preceding connect().
With this patch smc_poll starts connect logic only, if the CLC-socket
is no longer in its initial state TCP_CLOSE.
In addition, a poll error on the internal CLC-socket is always
propagated to the SMC socket.
With this patch the code path mentioned by syzbot
https://syzkaller.appspot.com/bug?extid=03faa2dc16b8b64be396
is no longer possible.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Reported-by: syzbot+03faa2dc16b8b64be396@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Use disable_irq_nosync() instead of disable_irq() as this might be
called in atomic context with netpoll.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Reject unsupported FIB configurations
Recently it became possible for listeners of the FIB notification chain
to veto operations such as addition of routes and rules.
Adjust the mlxsw driver to take advantage of it and return an error for
unsupported FIB rules and for routes configured after the abort
mechanism was triggered (due to exceeded resources for example).
v2:
* Change error code in first patch to -EOPNOTSUPP (David Ahern).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently do not perform accounting in the driver and thus can't
reject routes before resources are exceeded.
However, in order to make users aware of the fact that routes are no
longer offloaded we can return an error for routes configured after the
abort mechanism was triggered.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 9776d32537 ("net: Move call_fib_rule_notifiers up in
fib_nl_newrule") it is possible to forbid the installation of
unsupported FIB rules.
Have mlxsw return an error for non-default FIB rules in addition to the
existing extack message.
Example:
# ip rule add from 198.51.100.1 table 10
Error: mlxsw_spectrum: FIB rules not supported.
Note that offload is only aborted when non-default FIB rules are already
installed and merely replayed during module initialization.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add device id's 0x5019, 0x501a and 0x501b for T5
cards.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Python script used to parse and extract eBPF helpers documentation
from include/uapi/linux/bpf.h expects a very specific formatting for the
descriptions (single dot represents a space, '>' stands for a tab):
/*
...
*.int bpf_helper(list of arguments)
*.> Description
*.> > Start of description
*.> > Another line of description
*.> > And yet another line of description
*.> Return
*.> > 0 on success, or a negative error in case of failure
...
*/
This is too strict, and painful for developers who wants to add
documentation for new helpers. Worse, it is extremely difficult to check
that the formatting is correct during reviews. Change the format
expected by the script and make it more flexible. The script now works
whether or not the initial space (right after the star) is present, and
accepts both tabs and white spaces (or a combination of both) for
indenting description sections and contents.
Concretely, something like the following would now be supported:
/*
...
*int bpf_helper(list of arguments)
*......Description
*.> > Start of description...
*> > Another line of description
*..............And yet another line of description
*> Return
*.> ........0 on success, or a negative error in case of failure
...
*/
While at it, remove unnecessary carets from each regex used with match()
in the script. They are redundant, as match() tries to match from the
beginning of the string by default.
v2: Remove unnecessary caret when a regex is used with match().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp
processes auth chunk first, then continues to the next chunk in
this packet if chunk_end + chunk_hdr size < skb_tail_pointer().
Otherwise, it will go to the next packet or discard this chunk.
However, it missed the fact that cookie-ack chunk's size is equal
to chunk_hdr size, which couldn't match that check, and thus this
chunk would not get processed.
This patch fixes it by changing the check to chunk_end + chunk_hdr
size <= skb_tail_pointer().
Fixes: 26b87c7881 ("net: sctp: fix remote memory pressure from excessive queueing")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When processing a duplicate cookie-echo chunk, for case 'D', sctp will
not process the param from this chunk. It means old asoc has nothing
to be updated, and the new temp asoc doesn't have the complete info.
So there's no reason to use the new asoc when creating the cookie-ack
chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk
can not be set with auth, and it will definitely be dropped by peer.
This issue is there since very beginning, and we fix it by using the
old asoc instead.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When processing a duplicate cookie-echo chunk, for case 'A' and 'B',
after sctp_process_init for the new asoc, if auth is enabled for the
cookie-ack chunk, the active key should also be initialized.
Otherwise, the cookie-ack chunk made later can not be set with auth
shkey properly, and a crash can even be caused by this, as after
Commit 1b1e0bc994 ("sctp: add refcnt support for sh_key"), sctp
needs to hold the shkey when making control chunks.
Fixes: 1b1e0bc994 ("sctp: add refcnt support for sh_key")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously the bbr->idle_restart tracking was zeroing out the
bbr->idle_restart bit upon ACKs that did not SACK or ACK anything,
e.g. receiving incoming data or receiver window updates. In such
situations BBR would forget that this was a restart-from-idle
situation, and if the min_rtt had expired it would unnecessarily enter
PROBE_RTT (even though we were actually restarting from idle but had
merely forgotten that fact).
The fix is simple: we need to remember we are restarting from idle
until we receive a S/ACK for some data (a S/ACK for the first flight
of data we send as we are restarting).
This commit is a stable candidate for kernels back as far as 4.9.
Fixes: 0f8782ea14 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the quest to remove all stack VLAs from the kernel[1], this switches
the "status" stack buffer to use the existing small (8) upper bound on
how many queues can be checked for DMA, and adds a sanity-check just to
make sure it doesn't operate under pathological conditions.
[1] http://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dual_mac mode packets arrived on one port should not be forwarded by
switch hw to another port. Only Linux Host can forward packets between
ports. The below test case (reported in [1]) shows that packet arrived on
one port can be leaked to anoter (reproducible with dual port evms):
- connect port 1 (eth0) to linux Host 0 and run tcpdump or Wireshark
- connect port 2 (eth1) to linux Host 1 with vlan 1 configured
- ping <IPx> from Host 1 through vlan 1 interface.
ARP packets will be seen on Host 0.
Issue happens because dual_mac mode is implemnted using two vlans: 1 (Port
1+Port 0) and 2 (Port 2+Port 0), so there are vlan records created for for
each vlan. By default, the ALE will find valid vlan record in its table
when vlan 1 tagged packet arrived on Port 2 and so forwards packet to all
ports which are vlan 1 members (like Port.
To avoid such behaviorr the ALE VLAN ID Ingress Check need to be enabled
for each external CPSW port (ALE_PORTCTLn.VID_INGRESS_CHECK) so ALE will
drop ingress packets if Rx port is not VLAN member.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NIC firmware does not support disabling rx vlan offload, but the VF driver
incorrectly indicates that it is supported. The PF driver already does the
correct indication by clearing the NETIF_F_HW_VLAN_CTAG_RX bit in its
netdev->hw_features. So just do the same thing in the VF.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Acked-by: Prasad Kanneganti <prasad.kanneganti@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using the udp_v4_check() function to calculate the pseudo header
for the newly segmented UDP packets results in assigning the complement
of the value to the UDP header checksum field.
Always undo the complement the partial checksum value in order to
match the case where GSO is not used on the UDP transmit path.
Fixes: ee80d1ebe5 ("udp: add udp gso")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 93c0d549c4c5a7382ad70de6b86610b7aae57406.
Unfortunately the padding will break 32 bit userspace.
Ouch. Need to add some compat code, revert for now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So by chance I looked into x86 assembly in arch/x86/net/bpf_jit_comp.c and
noticed the weird and inconsistent comment style it mistakenly learned from
the networking code:
/* Multi-line comment ...
* ... looks like this.
*/
Fix this to use the standard comment style specified in Documentation/CodingStyle
and used in arch/x86/ as well:
/*
* Multi-line comment ...
* ... looks like this.
*/
Also, to quote Linus's ... more explicit views about this:
http://article.gmane.org/gmane.linux.kernel.cryptoapi/21066
> But no, the networking code picked *none* of the above sane formats.
> Instead, it picked these two models that are just half-arsed
> shit-for-brains:
>
> (no)
> /* This is disgusting drug-induced
> * crap, and should die
> */
>
> (no-no-no)
> /* This is also very nasty
> * and visually unbalanced */
>
> Please. The networking code actually has the *worst* possible comment
> style. You can literally find that (no-no-no) style, which is just
> really horribly disgusting and worse than the otherwise fairly similar
> (d) in pretty much every way.
Also improve the comments and some other details while at it:
- Don't mix same-line and previous-line comment style on otherwise
identical code patterns within the same function,
- capitalize 'BPF' and x86 register names consistently,
- capitalize sentences consistently,
- instead of 'x64' use 'x86-64': x64 is a Microsoft specific term,
- use more consistent punctuation,
- use standard coding style in macros as well,
- fix typos and a few other minor details.
Consistent coding style is not optional, at least in arch/x86/.
No change in functionality.
( In case this commit causes conflicts with pending development code
I'll be glad to help resolve any conflicts! )
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The result was printing the warning only when we were explicitly asked
not to.
Cc: stable@vger.kernel.org
Fixes: 0176adb004 "swiotlb: refactor
coherent buffer allocation"
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull hexagon fixes from Richard Kuo:
"Some small fixes for module compilation"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
hexagon: export csum_partial_copy_nocheck
hexagon: add memset_io() helper
Firmware requires that the ttl value for an encapsulating ipv4 tunnel
header be included as an action field. Prior to the support of Geneve
tunnel encap (when ttl set was removed completely), ttl value was
extracted from the tunnel key. However, tests have shown that this can
still produce a ttl of 0.
Fix the issue by setting the namespace default value for each new tunnel.
Follow up patch for net-next will do a full route lookup.
Fixes: 3ca3059dc3 ("nfp: flower: compile Geneve encap actions")
Fixes: b27d6a95a7 ("nfp: compile flower vxlan tunnel set actions")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is reported that in some cases, write_space may be called in
do_tcp_sendpages, such that we recursively invoke do_tcp_sendpages again:
[ 660.468802] ? do_tcp_sendpages+0x8d/0x580
[ 660.468826] ? tls_push_sg+0x74/0x130 [tls]
[ 660.468852] ? tls_push_record+0x24a/0x390 [tls]
[ 660.468880] ? tls_write_space+0x6a/0x80 [tls]
...
tls_push_sg already does a loop over all sending sg's, so ignore
any tls_write_space notifications until we are done sending.
We then have to call the previous write_space to wake up
poll() waiters after we are done with the send loop.
Reported-by: Andre Tomt <andre@tomt.net>
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Applications with many concurrent connections, high variance
in receive queue length and tight memory bounds cannot
allocate worst-case buffer size to drain sockets. Knowing
the size of receive queue length, applications can optimize
how they allocate buffers to read from the socket.
The number of bytes pending on the socket is directly
available through ioctl(FIONREAD/SIOCINQ) and can be
approximated using getsockopt(MEMINFO) (rmem_alloc includes
skb overheads in addition to application data). But, both of
these options add an extra syscall per recvmsg. Moreover,
ioctl(FIONREAD/SIOCINQ) takes the socket lock.
Add the TCP_INQ socket option to TCP. When this socket
option is set, recvmsg() relays the number of bytes available
on the socket for reading to the application via the
TCP_CM_INQ control message.
Calculate the number of bytes after releasing the socket lock
to include the processed backlog, if any. To avoid an extra
branch in the hot path of recvmsg() for this new control
message, move all cmsg processing inside an existing branch for
processing receive timestamps. Since the socket lock is not held
when calculating the size of receive queue, TCP_INQ is a hint.
For example, it can overestimate the queue size by one byte,
if FIN is received.
With this method, applications can start reading from the socket
using a small buffer, and then use larger buffers based on the
remaining data when needed.
V3 change-log:
As suggested by David Miller, added loads with barrier
to check whether we have multiple threads calling recvmsg
in parallel. When that happens we lock the socket to
calculate inq.
V4 change-log:
Removed inline from a static function.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit af503716ac ("i2c: core: report OF style module alias for devices
registered via OF") fixed how the I2C core reports the module alias when
devices are registered via OF.
But the atmel_mxt_ts driver only has an "atmel,maxtouch" compatible in its
OF device ID table, so if a Device Tree is using a different one, autoload
won't be working for the module (the matching works because the I2C device
ID table is used as a fallback).
So add compatible strings for each of the entries in the I2C device table.
Fixes: af503716ac ("i2c: core: report OF style module alias for devices registered via OF")
Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[dtor: document which compatibles are deprecated and should not be used]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1. remove useless parameter list to ./urandom_read
2. add missing "\n" to the end of an error message
Fixes: 81f77fd0de ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To make eBPF program load time easier to parse from "bpftool prog"
output for machines, change the time format used by the program. The
format now differs for plain and JSON version:
- Plain version uses a string formatted according to ISO 8601.
- JSON uses the number of seconds since the Epoch, wich is less friendly
for humans but even easier to process.
Example output:
# ./bpftool prog
41298: xdp tag a04f5eef06a7f555 dev foo
loaded_at 2018-04-18T17:19:47+0100 uid 0
xlated 16B not jited memlock 4096B
# ./bpftool prog -p
[{
"id": 41298,
"type": "xdp",
"tag": "a04f5eef06a7f555",
"gpl_compatible": false,
"dev": {
"ifindex": 14,
"ns_dev": 3,
"ns_inode": 4026531993,
"ifname": "foo"
},
"loaded_at": 1524068387,
"uid": 0,
"bytes_xlated": 16,
"jited": false,
"bytes_memlock": 4096
}
]
Previously, "Apr 18/17:19" would be used at both places.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is needed to link ipv6 as a loadable module, which in turn happens
in allmodconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
We already have memcpy_toio(), but not memset_io(), so let's
add the obvious version to allow building an allmodconfig kernel
without errors like
drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_move_memcpy':
drivers/gpu/drm/ttm/ttm_bo_util.c:390:3: error: implicit declaration of function 'memset_io' [-Werror=implicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Salil Mehta says:
====================
Misc bug fixes for HNS3 Ethernet driver
This patch-set presents some miscellaneous bug fixs and cleanups for
HNS3 Ethernet Driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
