We previously made sure that the reported disk capacity was less than
0xffffffff blocks when the kernel was not compiled with large sector_t
support (CONFIG_LBDAF). However, this check assumed that the capacity
was reported in units of 512 bytes.
Add a sanity check function to ensure that we only enable disks if the
entire reported capacity can be expressed in terms of sector_t.
Cc: <stable@vger.kernel.org>
Reported-by: Steve Magnani <steve.magnani@digidescorp.com>
Cc: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add fix to read correct register value for ISP82xx, during check for
register disconnect.ISP82xx has different base register.
Fixes: a465537ad1 ("qla2xxx: Disable the adapter and skip error recovery in case of register disconnect")
Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kefeng Wang discovered that old versions of the QEMU CD driver would
return mangled mode data causing us to walk off the end of the buffer in
an attempt to parse it. Sanity check the returned mode sense data.
Cc: <stable@vger.kernel.org>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If device reports a small max_xfer_blocks and a zero opt_xfer_blocks, we
end up using BLK_DEF_MAX_SECTORS, which is wrong and r/w of that size
may get error.
[mkp: tweaked to avoid setting rw_max twice and added typecast]
Cc: <stable@vger.kernel.org> # v4.4+
Fixes: ca369d51b3 ("block/sd: Fix device-imposed transfer length limits")
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Without this fix (and another to the userspace component itself
described later), the kernel will be unable to process any OrangeFS
requests after the userspace component is restarted (due to a crash or
at the administrator's behest).
The bug here is that inside orangefs_remount, the orangefs_request_mutex
is locked. When the userspace component restarts while the filesystem
is mounted, it sends a ORANGEFS_DEV_REMOUNT_ALL ioctl to the device,
which causes the kernel to send it a few requests aimed at synchronizing
the state between the two. While this is happening the
orangefs_request_mutex is locked to prevent any other requests going
through.
This is only half of the bugfix. The other half is in the userspace
component which outright ignores(!) requests made before it considers
the filesystem remounted, which is after the ioctl returns. Of course
the ioctl doesn't return until after the userspace component responds to
the request it ignores. The userspace component has been changed to
allow ORANGEFS_VFS_OP_FEATURES regardless of the mount status.
Mike Marshall says:
"I've tested this patch against the fixed userspace part. This patch is
real important, I hope it can make it into 4.11...
Here's what happens when the userspace daemon is restarted, without
the patch:
=============================================
[ INFO: possible recursive locking detected ]
[ 4.10.0-00007-ge98bdb3 #1 Not tainted ]
---------------------------------------------
pvfs2-client-co/29032 is trying to acquire lock:
(orangefs_request_mutex){+.+.+.}, at: service_operation+0x3c7/0x7b0 [orangefs]
but task is already holding lock:
(orangefs_request_mutex){+.+.+.}, at: dispatch_ioctl_command+0x1bf/0x330 [orangefs]
CPU: 0 PID: 29032 Comm: pvfs2-client-co Not tainted 4.10.0-00007-ge98bdb3 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014
Call Trace:
__lock_acquire+0x7eb/0x1290
lock_acquire+0xe8/0x1d0
mutex_lock_killable_nested+0x6f/0x6e0
service_operation+0x3c7/0x7b0 [orangefs]
orangefs_remount+0xea/0x150 [orangefs]
dispatch_ioctl_command+0x227/0x330 [orangefs]
orangefs_devreq_ioctl+0x29/0x70 [orangefs]
do_vfs_ioctl+0xa3/0x6e0
SyS_ioctl+0x79/0x90"
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Acked-by: Mike Marshall <hubcap@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent extension of F-RTO 89fe18e44 ("tcp: extend F-RTO
to catch more spurious timeouts") interacts badly with certain
broken middle-boxes. These broken boxes modify and falsely raise
the receive window on the ACKs. During a timeout induced recovery,
F-RTO would send new data packets to probe if the timeout is false
or not. Since the receive window is falsely raised, the receiver
would silently drop these F-RTO packets. The recovery would take N
(exponentially backoff) timeouts to repair N packet losses. A TCP
performance killer.
Due to this unfortunate situation, this patch removes this extension
to revert F-RTO back to the RFC specification.
Fixes: 89fe18e44f ("tcp: extend F-RTO to catch more spurious timeouts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To improve scalability, if hardware queues are shared, restart
a single hardware queue in round-robin fashion. Rename
blk_mq_sched_restart_queues() to reflect the new semantics.
Remove blk_mq_sched_mark_restart_queue() because this function
has no callers. Remove flag QUEUE_FLAG_RESTART because this
patch removes the code that uses this flag.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
While running the srp-test software I noticed that request
processing stalls sporadically at the beginning of a test, namely
when mkfs is run against a dm-mpath device. Every time when that
happened the following command was sufficient to resume request
processing:
echo run >/sys/kernel/debug/block/dm-0/state
This patch avoids that such request processing stalls occur. The
test I ran is as follows:
while srp-test/run_tests -d -r 30 -t 02-mq; do :; done
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Jens Axboe <axboe@fb.com>
If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block
driver that implements that function is responsible for rerunning the
hardware queue once requests can be queued again successfully.
commit 52d7f1b5c2 ("blk-mq: Avoid that requeueing starts stopped
queues") removed the blk_mq_stop_hw_queue() call from scsi_queue_rq()
for the BLK_MQ_RQ_QUEUE_BUSY case. Hence change all calls to functions
that are intended to rerun a busy queue such that these examine all
hardware queues instead of only stopped queues.
Since no other functions than scsi_internal_device_block() and
scsi_internal_device_unblock() should ever stop or restart a SCSI
queue, change the blk_mq_delay_queue() call into a
blk_mq_delay_run_hw_queue() call.
Fixes: commit 52d7f1b5c2 ("blk-mq: Avoid that requeueing starts stopped queues")
Fixes: commit 7e79dadce2 ("blk-mq: stop hardware queue in blk_mq_delay_queue()")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Long Li <longli@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Introduce a function that runs a hardware queue unconditionally
after a delay. Note: there is already a function that stops and
restarts a hardware queue after a delay, namely blk_mq_delay_queue().
This function will be used in the next patch in this series.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Long Li <longli@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
- A stable@ fix for raid target's raid1 support (when no bitmap is used)
- A 4.11 cache metadata v2 format fix to properly test blocks are clean
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY56smAAoJEMUj8QotnQNa3xYH/39l25eGzam0cnITa31cX9uu
lb+oWnqbgvbd65HZr2QPu9RO8LQMK9wxw40wapyYTEnkDfgeW+hmwYo3BUZ0IpdT
Ry39KGCGaxk3L3cATSgtZT18AsWRHmKqlHLf6y98RdeFLVb3lyUFllkLF9r3M2ep
1Ga2MiMJYffaiTsSKxwZQG3XG7mq9MNfRnCehGAQwjGgWL3EsYHNsq+Hosn/tdtZ
2D7BvAMr2X+3xEUVevqL2dFmJ1D2tbJjtedeAKVOccErV/BofwWPUvTOFX8202+Y
CUC9pW+hDQqpCm15Pr4N6oU4TeC4mHMwGK0SLWmoXkl3VDPbUUO3qC5AwKxsepA=
=cWkE
-----END PGP SIGNATURE-----
Merge tag 'dm-4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- two stable fixes for the verity target's FEC support
- a stable fix for raid target's raid1 support (when no bitmap is used)
- a 4.11 cache metadata v2 format fix to properly test blocks are clean
* tag 'dm-4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity fec: fix bufio leaks
dm raid: fix NULL pointer dereference for raid1 without bitmap
dm cache metadata: fix metadata2 format's blocks_are_clean_separate_dirty
dm verity fec: limit error correction recursion
- Restore previous SIGBUS behaviour for unhandled unaligned user accesses
- Revert broken support for the contiguous bit in hugetlb (again...)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJY53foAAoJELescNyEwWM0ILEH/An3v6VSnbABDRxvXWkrTvKZ
y4KoHVgSDqehrH8MysrrI7SlB5J5AEGjQI2SzI2InVS4j4Dd/kfqZMeZlo2Z2Idv
KlC4FXb6QhRjJrrLCVIWCZxQL8gqP9KEI+DwB76a46WSYHHWP4ihtfYTxpTSAZbj
mDHOmZ2udc/GjEpPzzPNOhXs0+1dEAHkQa+gW8T5HotQK+VVBwFTJKPXGNjm/YQa
A1lLzYW/R9xRzAeEaJIGa6/jy6jJQ09vkXUdriibRi9qu7+A/xecgq3nb6puwT3j
0BQqvVQ3eAEejlXA5L4xtdwNb3fhe8hK4pq9OgNnhSytntAtbSiqvGTHea03XKY=
=d5YQ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a regression fix for the signal raised when userspace makes
an unsupported unaligned access and a revert of the contiguous
(hugepte) support for hugetlb, which has once again been found to be
broken. One day, maybe, we'll get it right.
Summary:
- restore previous SIGBUS behaviour for unhandled unaligned user
accesses
- revert broken support for the contiguous bit in hugetlb (again...)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "Revert "arm64: hugetlb: partial revert of 66b3923a1a0f""
arm64: mm: unaligned access by user-land should be received as SIGBUS
These patches fix a bunch of longstanding (some over a decade old) metag
user copy fault handling bugs. Thanks go to Al Viro for spotting some of
the questionable code in the first place.
-----BEGIN PGP SIGNATURE-----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=MwhE
-----END PGP SIGNATURE-----
Merge tag 'metag-for-v4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull metag usercopy fixes from James Hogan:
"Metag usercopy fault handling fixes
These patches fix a bunch of longstanding (some over a decade old)
metag user copy fault handling bugs. Thanks go to Al Viro for spotting
some of the questionable code in the first place"
* tag 'metag-for-v4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag/usercopy: Add missing fixups
metag/usercopy: Fix src fixup in from user rapf loops
metag/usercopy: Set flags before ADDZ
metag/usercopy: Zero rest of buffer from copy_from_user
metag/usercopy: Add early abort to copy_to_user
metag/usercopy: Fix alignment error checking
metag/usercopy: Drop unused macros
- Refine the check for the existence of _HID in find_child_checks()
so that it doesn't trigger for device objects with device IDs
made up by the kernel (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=04+L
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes a core device enumeration code change made in 4.10, in
order to address a reported issue, that went too far.
Specifics:
- Refine the check for the existence of _HID in find_child_checks()
so that it doesn't trigger for device objects with device IDs made
up by the kernel (Rafael Wysocki)"
* tag 'acpi-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: Prefer devices without _HID for _ADR matching
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJY5ysAAAoJELDendYovxMvEIoH/2Jl9vM9DzfdTxfyvSS0+i3/
e3UTL4igNSBT5W4t3DL0o5IZ9e6LQ17j8VWqbpT8d6AzdvtW6xx4ZpulPuh/qTnA
pHNUy9yPXr91k4KzSgV3ASaqxdBOIAq74t0u+BwpDjWV8Vok5oONxPf03vigfrKb
jFLZfP0DilSI6YIsExtUqZhT1ydnG6mm0PMXGT5VfHgnotUVapSnZw8Ht/STXRbH
SZ5a1QLcQxfFziFEmBGSOqIKLmA3TYpzBcbSVg4vjysdmf910C8tU6KFkdDhg8Gu
3vWsjBpgxoAmdHYfElD3PDp1pyWTmKkF0jtJavcaNp0GOGD8f5jg1Rf/eozD9CA=
=6Oc6
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.11b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen fix from Juergen Gross:
"A fix for error path cleanup in the xenbus handler"
* tag 'for-linus-4.11b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: remove transaction holder from list before freeing
I saw some very confusing sysctl output on my system:
# cat /proc/sys/net/core/xfrm_aevent_rseqth
-2
# cat /proc/sys/net/core/xfrm_aevent_etime
-10
# cat /proc/sys/net/ipv4/tcp_notsent_lowat
-4294967295
Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.
Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit e7d316a02f ("sysctl: handle error writing UINT_MAX to u32
fields") introduced the proc_douintvec helper function, but it forgot to
add the related sanity check when doing register_sysctl_table. So add
it now.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
since 4.10 perf annotate exits on s390 with an "unknown error -95".
Turns out that commit 786c1b5184 ("perf annotate: Start supporting
cross arch annotation") added a hard requirement for architecture
support when objdump is used but only provided x86 and arm support.
Meanwhile power was added so lets add s390 as well.
While at it make sure to implement the branch and jump types.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-s390 <linux-s390@vger.kernel.org>
Cc: stable@kernel.org # v4.10+
Fixes: 786c1b5184 "perf annotate: Start supporting cross arch annotation"
Link: http://lkml.kernel.org/r/1491465112-45819-2-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Connecting to the backend isn't working reliably in xen-fbfront: in
case XenbusStateInitWait of the backend has been missed the backend
transition to XenbusStateConnected will trigger the connected state
only without doing the actions required when the backend has
connected.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
SSD1306 needs VBAT when it is wired in charge pump configuration only.
Other controllers of the SSD1307 family do not need it at all. This was
introduced by commit ba14301e03 ("fbdev/ssd1307fb: add support to
enable VBAT").
Without VBAT configuration the driver now fails with:
failed to get VBAT regulator: -19
This is caused by misinterpretation of devm_regulator_get_optional
which "returns a struct regulator corresponding to the regulator
producer or IS_ERR() condition".
Handle -ENODEV without bailing out and making VBAT support really
optional.
Signed-off-by: Bastian Stender <bst@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
[b.zolnierkie: minor fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
blk_mq_update_nr_hw_queues() used to remap hardware queues, which is the
behavior that drivers expect. However, commit 4e68a01142 changed
blk_mq_queue_reinit() to not remap queues for the case of CPU
hotplugging, inadvertently making blk_mq_update_nr_hw_queues() not remap
queues as well. This breaks, for example, NBD's multi-connection mode,
leaving the added hardware queues unused. Fix it by making
blk_mq_update_nr_hw_queues() explicitly remap the queues.
Fixes: 4e68a01142 ("blk-mq: don't redistribute hardware queues on a CPU hotplug event")
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall
back to the original scheduler. However, at this point, we've already
torn down the original scheduler's tags, so this causes a crash. Doing
the fallback like the legacy elevator path is much harder for mq, so fix
it by just falling back to none, instead.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If a new hardware queue is added at runtime, we don't allocate scheduler
tags for it, leading to a crash. This hooks up the scheduler framework
to blk_mq_{init,exit}_hctx() to make sure everything gets properly
initialized/freed.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Preparation cleanup for the next couple of fixes, push
blk_mq_sched_setup() and e->ops.mq.init_sched() into a helper.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
While dispatching requests, if we fail to get a driver tag, we mark the
hardware queue as waiting for a tag and put the requests on a
hctx->dispatch list to be run later when a driver tag is freed. However,
blk_mq_dispatch_rq_list() may dispatch requests from multiple hardware
queues if using a single-queue scheduler with a multiqueue device. If
blk_mq_get_driver_tag() fails, it doesn't update the hardware queue we
are processing. This means we end up using the hardware queue of the
previous request, which may or may not be the same as that of the
current request. If it isn't, the wrong hardware queue will end up
waiting for a tag, and the requests will be on the wrong dispatch list,
leading to a hang.
The fix is twofold:
1. Make sure we save which hardware queue we were trying to get a
request for in blk_mq_get_driver_tag() regardless of whether it
succeeds or not.
2. Make blk_mq_dispatch_rq_list() take a request_queue instead of a
blk_mq_hw_queue to make it clear that it must handle multiple
hardware queues, since I've already messed this up on a couple of
occasions.
This didn't appear in testing with nvme and mq-deadline because nvme has
more driver tags than the default number of scheduler tags. However,
with the blk_mq_update_nr_hw_queues() fix, it showed up with nbd.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The pattern did not catch include/linux/virtio.h.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We try to disable callbacks on c_ivq even without multiport
even though that vq is not initialized in this configuration.
Fixes: c743d09dbd ("virtio: console: Disable callbacks for virtqueues at start of S4 freeze")
Suggested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio attempts to clear the MTU feature bit if the value is out of the
supported range, but this has no real effect since FEATURES_OK has
already been set.
Fix this up by checking the MTU in the new validate callback.
Fixes: 14de9d114a ("virtio-net: Add initial MTU advice feature")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some drivers can't support all features in all configurations. At the
moment we blindly set FEATURES_OK and later FAILED. Support this better
by adding a callback drivers can use to do some early checks.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If one enables e.g. jumbo frames without mergeable
buffers, packets won't fit in 1500 byte buffers
we use. Switch to big packet mode instead.
TODO: make sizing more exact, possibly extend small
packet mode to use larger pages.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the cifs module breaks the CIFS specs on reconnect as
described in http://msdn.microsoft.com/en-us/library/cc246529.aspx:
"TreeId (4 bytes): Uniquely identifies the tree connect for the
command. This MUST be 0 for the SMB2 TREE_CONNECT Request."
Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
I saw the following build error during a randconfig build:
fs/cifs/smb2ops.c: In function 'smb2_new_lease_key':
fs/cifs/smb2ops.c:1104:2: error: implicit declaration of function 'generate_random_uuid' [-Werror=implicit-function-declaration]
Explicit include the right header to fix this issue.
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The earlier changes to copy range for cifs unintentionally disabled the more
common form of server side copy.
The patch introduces the file_operations helper cifs_copy_file_range()
which is used by the syscall copy_file_range. The new file operations
helper allows us to perform server side copies for SMB2.0 and 2.1
servers as well as SMB 3.0+ servers which do not support the ioctl
FSCTL_DUPLICATE_EXTENTS_TO_FILE.
The new helper uses the ioctl FSCTL_SRV_COPYCHUNK_WRITE to perform
server side copies. The helper is called by vfs_copy_file_range() only
once an attempt to clone the file using the ioctl
FSCTL_DUPLICATE_EXTENTS_TO_FILE has failed.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Server side copy is one of the most important mechanisms smb2/smb3
supports and it was unintentionally disabled for most use cases.
Renaming calls to reflect the underlying smb2 ioctl called. This is
similar to the name duplicate_extents used for a similar ioctl which is
also used to duplicate files by reusing fs blocks. The name change is to
avoid confusion.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.
The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.
For this patch, the check is only done in SendReceive2()
RH-bz: 1403319
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Stable <stable@vger.kernel.org>
The use of the contiguous bit by our hugetlb implementation violates
the break-before-make requirements of the architecture and can lead to
silent data corruption or TLB conflict aborts. Once again, disable these
hugetlb sizes whilst it gets worked out.
This reverts commit ab2e1b8923.
Conflicts:
arch/arm64/mm/hugetlbpage.c
Signed-off-by: Will Deacon <will.deacon@arm.com>
In crc32c_vpmsum() we call enable_kernel_altivec() without first
disabling preemption, which is not allowed:
WARNING: CPU: 9 PID: 2949 at ../arch/powerpc/kernel/process.c:277 enable_kernel_altivec+0x100/0x120
Modules linked in: dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c vmx_crypto ...
CPU: 9 PID: 2949 Comm: docker Not tainted 4.11.0-rc5-compiler_gcc-6.3.1-00033-g308ac7563944 #381
...
NIP [c00000000001e320] enable_kernel_altivec+0x100/0x120
LR [d000000003df0910] crc32c_vpmsum+0x108/0x150 [crc32c_vpmsum]
Call Trace:
0xc138fd09 (unreliable)
crc32c_vpmsum+0x108/0x150 [crc32c_vpmsum]
crc32c_vpmsum_update+0x3c/0x60 [crc32c_vpmsum]
crypto_shash_update+0x88/0x1c0
crc32c+0x64/0x90 [libcrc32c]
dm_bm_checksum+0x48/0x80 [dm_persistent_data]
sb_check+0x84/0x120 [dm_thin_pool]
dm_bm_validate_buffer.isra.0+0xc0/0x1b0 [dm_persistent_data]
dm_bm_read_lock+0x80/0xf0 [dm_persistent_data]
__create_persistent_data_objects+0x16c/0x810 [dm_thin_pool]
dm_pool_metadata_open+0xb0/0x1a0 [dm_thin_pool]
pool_ctr+0x4cc/0xb60 [dm_thin_pool]
dm_table_add_target+0x16c/0x3c0
table_load+0x184/0x400
ctl_ioctl+0x2f0/0x560
dm_ctl_ioctl+0x38/0x50
do_vfs_ioctl+0xd8/0x920
SyS_ioctl+0x68/0xc0
system_call+0x38/0xfc
It used to be sufficient just to call pagefault_disable(), because that
also disabled preemption. But the two were decoupled in commit 8222dbe21e
("sched/preempt, mm/fault: Decouple preemption from the page fault
logic") in mid 2015.
So add the missing preempt_disable/enable(). We should also call
disable_kernel_fp(), although it does nothing by default, there is a
debug switch to make it active and all enables should be paired with
disables.
Fixes: 6dd7a82cc5 ("crypto: powerpc - Add POWER8 optimised crc32c")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Recent pinctrl changes to allow dynamic allocation of pins exposed one
more issue with the pinctrl pins claimed early by the controller itself.
This caused a regression for IMX6 pinctrl hogs.
Before enabling the pin controller driver we need to wait until it has
been properly initialized, then claim the hogs, and only then enable it.
To fix the regression, split the code into pinctrl_claim_hogs() and
pinctrl_enable(). And then let's require that pinctrl_enable() is always
called by the pin controller driver when ready after calling
pinctrl_register_and_init().
Depends-on: 950b0d91dc ("pinctrl: core: Fix regression caused by delayed
work for hogs")
Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs")
Fixes: e566fc11ea ("pinctrl: imx: use generic pinctrl helpers for
managing groups")
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Rework the inline directory verifier to avoid crashes on disk corruption
- Don't change file size when punching holes w/ KEEP_SIZE
- Close a kernel memory exposure bug
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QdXx
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS fixes from Darrick Wong:
"Here are three more fixes for 4.11.
The first one reworks the inline directory verifier to check the
working copy of the directory metadata and to avoid triggering a
periodic crash in xfs/348. The second patch fixes a regression in hole
punching at EOF that corrupts files; and the third patch closes a
kernel memory disclosure bug.
Summary:
- rework the inline directory verifier to avoid crashes on disk
corruption
- don't change file size when punching holes w/ KEEP_SIZE
- close a kernel memory exposure bug"
* tag 'xfs-4.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix kernel memory exposure problems
xfs: Honor FALLOC_FL_KEEP_SIZE when punching ends of files
xfs: rework the inline directory verifiers
Commit f6988cb63a ("team: don't call netdev_change_features under
team->lock") fixed the issue calling netdev_change_features under
team->lock for team_compute_features.
But there are still two places where it calls netdev_change_features
under team->lock, team_port_add and team_port_del. It may cause a
dead lock when the slave port with LRO enabled is added.
This patch is to fix this dead lock by moving netdev_change_features
out of team_port_add and team_port_del, and call it after unlocking
the team lock.
Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now sctp doesn't check sock's state before listening on it. It could
even cause changing a sock with any state to become a listening sock
when doing sctp_listen.
This patch is to fix it by checking sock's state in sctp_listen, so
that it will listen on the sock with right state.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull MIPS fixes from Ralf Baechle:
"Lantiq:
- Fix adding xbar resoures causing a panic
Loongson3:
- Some Loongson 3A don't identify themselves as having an FTLB so
hardwire that knowledge into CPU probing.
- Handle Loongson 3 TLB peculiarities in the fast path of the RDHWR
emulation.
- Fix invalid FTLB entries with huge page on VTLB+FTLB platforms
- Add missing calculation of S-cache and V-cache cache-way size
Ralink:
- Fix typos in rt3883 pinctrl data
Generic:
- Force o32 fp64 support on 32bit MIPS64r6 kernels
- Yet another build fix after the linux/sched.h changes
- Wire up statx system call
- Fix stack unwinding after introduction of IRQ stack
- Fix spinlock code to build even for microMIPS with recent binutils
SMP-CPS:
- Fix retrieval of VPE mask on big endian CPUs"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: IRQ Stack: Unwind IRQ stack onto task stack
MIPS: c-r4k: Fix Loongson-3's vcache/scache waysize calculation
MIPS: Flush wrong invalid FTLB entry for huge page
MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3
MIPS: Add MIPS_CPU_FTLB for Loongson-3A R2
MIPS: Lantiq: fix missing xbar kernel panic
MIPS: smp-cps: Fix retrieval of VPE mask on big endian CPUs
MIPS: Wire up statx system call
MIPS: Include asm/ptrace.h now linux/sched.h doesn't
MIPS: ralink: Fix typos in rt3883 pinctrl
MIPS: End spinlocks with .insn
MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels
If for some unknown reason, the kthread that is created fails to be
created, the return from kthread_create() is an PTR_ERR and not a NULL.
The test incorrectly checks for NULL instead of an error.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJY5mOWFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
XcsH/iBX7Kf4ta/0Jo4+sR4+HeDmWNPVBTwlei+dvMfaK1rWDgW6hbwSJg3geUwN
d2zL/o7uCWbXubO9sjeCX2n+ecUiUcJRheewfdm0KzaPH387ofdUd24yz3DNDNcl
/yaZMmeApjpHJjJWxoH5TUSF/yliC2FvjHYWxgEx9qhrzldLk/r5qAealj2tKl1Q
1cgSQEgXf5n6Wg0onBuR2JiMOo3+4lXh+pIpO1Dupalhj7cC91HatDDYrNmGRIWR
qucf3iQLoD/m88bgpxsRortkQ09NfVJExxzIPliVoYF8VwtzL+77XD81EdgvLdTs
WP+CAoMFk83fkuXK7Vg1HZZa5zg=
=Z0D5
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Wei Yongjun fixed a long standing bug in the ring buffer startup test.
If for some unknown reason, the kthread that is created fails to be
created, the return from kthread_create() is an PTR_ERR and not a
NULL. The test incorrectly checks for NULL instead of an error"
* tag 'trace-v4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Fix return value check in test_ringbuffer()
Dmitry reported a crash when injecting faults in
attach_one_default_qdisc() and dev->qdisc is still
a noop_disc, the check before qdisc_hash_add() fails
to catch it because it tests NULL. We should test
against noop_qdisc since it is the default qdisc
at this point.
Fixes: 59cc1f61f0 ("net: sched: convert qdisc linked list to hashtable")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to
ip_route_input when iif is given. If a multipath route is present for
the designated destination, ip_multipath_icmp_hash ends up being called,
which uses the source/destination addresses within the skb to calculate
a hash. However, those are not set in the synthetic skb, causing it to
return an arbitrary and incorrect result.
Instead, use UDP, which gets no such special treatment.
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's unused for ages, used to be required for ksyms.c back in the v1.1
times.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
